SOS mise à niveau de Ubuntu v9.04 vers v12.04

maria1000 · Le 03/08/2013, à 12:08

Bonjour,

J'ai lancé la mise à niveau via le gestionnaire du PC. Cela a duré plus de 24h. Plusieurs erreurs ont été signalées. Finalement le PC démarre, mais il n'y a pas de réseau sans fil. Il y a bcp de logiciels en erreur. Comment faire? En plus j'ai perdu le menu qui permet d'acceder le gestionnaire des versions. Il me semble qu'il faudra tout vérifier et recommencer. Avez-vous des idées à me suggérer?
informations système : ubuntu 12.04 LST (précédente version 9.04).

Mini -PC ACER (ASPIRE)

Mémoire 991,0 Mo
Processeur : Intel Atom CPU N270@ 1.60GHzx2
Type OS : 32bits
Disque : 154,5Go

Cordialement,

Dernière modification par maria1000 (Le 03/08/2013, à 12:12)

lann · Le 03/08/2013, à 12:26

Que donne la commande

dmesg

dans un terminal ?

Sinon, le mieux serait peut-être de tout réinstaller

maria1000 · Le 03/08/2013, à 12:50

Merci pour cette réponse. J'ai essayé dmesg. Malheureusement ça n'a pas marché. Ubuntu a été bavard, mais il y a bcp de choses qui ne marchent pas.

maria1000 · Le 03/08/2013, à 12:51

Merci. J'ai lancé dmesg.

Voici les messages :

orkManager/nm-dhcp-client.action
[ 31.200688] type=1505 audit(1375522915.586:21): operation="profile_replace" pid=3547 name=/usr/lib/connman/scripts/dhclient-script
[ 31.207003] type=1505 audit(1375522915.590:22): operation="profile_load" pid=3546 name=/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper
[ 31.208373] type=1505 audit(1375522915.594:23): operation="profile_load" pid=3546 name=/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser
[ 31.345648] type=1505 audit(1375522915.730:24): operation="profile_load" pid=3550 name=/usr/lib/telepathy/mission-control-5
[ 31.347439] type=1505 audit(1375522915.730:25): operation="profile_load" pid=3550 name=/usr/lib/telepathy/telepathy-*
[ 31.453674] type=1505 audit(1375522915.838:26): operation="profile_load" pid=3551 name=/usr/lib/cups/backend/cups-pdf
[ 31.455606] type=1505 audit(1375522915.838:27): operation="profile_load" pid=3551 name=/usr/sbin/cupsd
[ 31.894375] ppdev: user-space parallel port driver
[ 32.229534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.229545] Bluetooth: BNEP filters: protocol multicast
[ 34.340394] init: gdm main process (3682) killed by TERM signal
[ 36.069666] alloc irq_desc for 28 on node -1
[ 36.069680] alloc kstat_irqs on node -1
[ 36.069720] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 36.070447] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.569811] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.713321] CPU0 attaching NULL sched-domain.
[ 48.713336] CPU1 attaching NULL sched-domain.
[ 48.732188] CPU0 attaching sched-domain:
[ 48.732200] domain 0: span 0-1 level SIBLING
[ 48.732209] groups: 0 1
[ 48.732225] CPU1 attaching sched-domain:
[ 48.732233] domain 0: span 0-1 level SIBLING
[ 48.732241] groups: 1 0
[ 49.324871] init: plymouth-stop pre-start process (4074) terminated with status 1
[ 54.520730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.172135] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 55.172856] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 55.554759] CPU0 attaching NULL sched-domain.
[ 55.554774] CPU1 attaching NULL sched-domain.
[ 55.572433] CPU0 attaching sched-domain:
[ 55.572445] domain 0: span 0-1 level SIBLING
[ 55.572454] groups: 0 1
[ 55.572470] CPU1 attaching sched-domain:
[ 55.572478] domain 0: span 0-1 level SIBLING
[ 55.572485] groups: 1 0
[ 55.884751] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 60.030303] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 60.030356] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 62.128074] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 62.129886] wlan0: authenticated
[ 62.129897] wlan0: associate with AP 00:25:15:4d:d6:58
[ 62.140058] wlan0: RX AssocResp from 00:25:15:4d:d6:58 (capab=0x411 status=0 aid=3)
[ 62.140069] wlan0: associated
[ 62.152622] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.326095] padlock: VIA PadLock not detected.
[ 73.056024] wlan0: no IPv6 routers present
[ 3160.892481] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3160.893053] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3160.910455] __ratelimit: 36 callbacks suppressed
[ 3160.910470] gnome-control-c[5854]: segfault at 20 ip 015e3619 sp bffbacf0 error 4 in libnetwork.so[15d7000+16000]
[ 3164.149097] wlan0: deauthenticating by local choice (reason=3)
[ 3164.333221] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3165.536506] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3165.577743] wlan0: direct probe to AP 0a:1d:6a:69:f4:f2 try 1
[ 3165.589089] wlan0 direct probe responded
[ 3165.589101] wlan0: authenticate with AP 0a:1d:6a:69:f4:f2
[ 3165.594300] wlan0: authenticated
[ 3165.594312] wlan0: associate with AP 0a:1d:6a:69:f4:f2
[ 3165.601087] wlan0: RX AssocResp from 0a:1d:6a:69:f4:f2 (capab=0x421 status=0 aid=1)
[ 3165.601099] wlan0: associated
[ 3165.602927] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3165.645106] wlan0: deauthenticating by local choice (reason=3)
[ 3165.854842] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3167.087847] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3167.088105] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3167.088546] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3167.089079] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3168.215442] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3168.215646] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3168.216515] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3168.217075] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3169.856780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3171.545227] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3171.545429] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3171.545912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3171.546447] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3172.944811] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3173.847625] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3173.848436] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3173.851555] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3173.852153] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3176.192760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3177.442391] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3177.443133] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3177.447343] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3177.447921] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3178.538663] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3182.432095] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 3182.432161] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 3184.578532] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 3184.584091] wlan0: authenticated
[ 3184.584101] wlan0: associate with AP 00:25:15:4d:d6:58
[ 3184.586883] wlan0: RX AssocResp from 00:25:15:4d:d6:58 (capab=0x411 status=0 aid=3)
[ 3184.586895] wlan0: associated
[ 3184.589964] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3187.948041] eth0: no IPv6 routers present
[ 3191.976477] wlan0: deauthenticating by local choice (reason=3)
[ 3192.105750] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3192.977777] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3193.037165] wlan0: deauthenticating by local choice (reason=3)
[ 3193.249772] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3194.419296] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3194.420027] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3194.424140] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3194.424735] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3195.590851] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3195.591063] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3195.591548] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3195.592117] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3197.037757] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3198.118078] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3198.118963] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3198.122195] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3198.122768] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3208.156042] eth0: no IPv6 routers present

maria1000 · Le 03/08/2013, à 13:22

Voici le résultat complet :

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
[ 0.000000] BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
[ 0.000000] BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
[ 0.000000] BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
[ 0.000000] BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask 0FFFE0000 write-protect
[ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable
[ 0.000000] 2 base 000000000 mask 0E0000000 write-back
[ 0.000000] 3 base 020000000 mask 0E0000000 write-back
[ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 5 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 6 base 03F500000 mask 0FFF00000 uncachable
[ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f376000 (usable)
[ 0.000000] modified: 000000003f376000 - 000000003f3bf000 (reserved)
[ 0.000000] modified: 000000003f3bf000 - 000000003f46d000 (usable)
[ 0.000000] modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
[ 0.000000] modified: 000000003f4bf000 - 000000003f4f0000 (usable)
[ 0.000000] modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
[ 0.000000] modified: 000000003f4ff000 - 000000003f500000 (usable)
[ 0.000000] modified: 000000003f500000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2ef8d000 - 2f6d7ddb
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACER )
[ 0.000000] ACPI: XSDT 3f4fe120 00064 (v01 ACER ACER 00000001 01000013)
[ 0.000000] ACPI: FACP 3f4fc000 000F4 (v04 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 3f4f2000 05C26 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 3f488000 00040
[ 0.000000] ACPI: SSDT 3f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: HPET 3f4fb000 00038 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 3f4fa000 00068 (v02 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 3f4f9000 0003C (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 3f4f1000 00180 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 3f4f0000 00028 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [002ef8d000 - 002f6d7ddb] RAMDISK ==> [002ef8d000 - 002f6d7ddb]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac244] BRK ==> [00008a9000 - 00008ac244]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f500
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f376
[ 0.000000] 0: 0x0003f3bf -> 0x0003f46d
[ 0.000000] 0: 0x0003f4bf -> 0x0003f4f0
[ 0.000000] 0: 0x0003f4ff -> 0x0003f500
[ 0.000000] On node 0 totalpages: 259057
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 251 pages used for memmap
[ 0.000000] HighMem zone: 31581 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257030
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=b553993d-534f-49ac-a6bd-91cd8c944262 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5186560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
[ 0.000000] Memory: 1006300k/1037312k available (4565k kernel code, 29472k reserved, 2143k data, 540k init, 127328k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.902 MHz processor.
[ 0.001922] Console: colour VGA+ 80x25
[ 0.001929] console [tty0] enabled
[ 0.002184] hpet clockevent registered
[ 0.002191] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.002203] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.80 BogoMIPS (lpj=6383608)
[ 0.002241] Security Framework initialized
[ 0.002280] AppArmor: AppArmor initialized
[ 0.002295] Mount-cache hash table entries: 512
[ 0.002521] Initializing cgroup subsys ns
[ 0.002532] Initializing cgroup subsys cpuacct
[ 0.002542] Initializing cgroup subsys memory
[ 0.002553] Initializing cgroup subsys freezer
[ 0.002559] Initializing cgroup subsys net_cls
[ 0.002585] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.002591] CPU: L2 cache: 512K
[ 0.002596] CPU: Physical Processor ID: 0
[ 0.002600] CPU: Processor Core ID: 0
[ 0.002608] mce: CPU supports 5 MCE banks
[ 0.002621] CPU0: Thermal monitoring enabled (TM1)
[ 0.002629] using mwait in idle threads.
[ 0.002640] Performance Counters: Atom events, Intel PMU driver.
[ 0.002655] ... version: 3
[ 0.002659] ... bit width: 40
[ 0.002663] ... generic counters: 2
[ 0.002668] ... value mask: 000000ffffffffff
[ 0.002672] ... max period: 000000007fffffff
[ 0.002677] ... fixed-purpose counters: 3
[ 0.002681] ... counter mask: 0000000700000003
[ 0.002690] Checking 'hlt' instruction... OK.
[ 0.020016] ACPI: Core revision 20090521
[ 0.040354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080053] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383869)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.169003] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.169038] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172049] Brought up 2 CPUs
[ 0.172057] Total of 2 processors activated (6383.73 BogoMIPS).
[ 0.172124] CPU0 attaching sched-domain:
[ 0.172132] domain 0: span 0-1 level SIBLING
[ 0.172138] groups: 0 1
[ 0.172149] CPU1 attaching sched-domain:
[ 0.172154] domain 0: span 0-1 level SIBLING
[ 0.172159] groups: 1 0
[ 0.172316] Booting paravirtualized kernel on bare hardware
[ 0.172473] regulator: core version 0.5
[ 0.172473] Time: 9:41:24 Date: 08/03/13
[ 0.172473] NET: Registered protocol family 16
[ 0.172473] EISA bus registered
[ 0.172473] ACPI: bus type pci registered
[ 0.172594] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.172602] PCI: MCFG area at e0000000 reserved in E820
[ 0.172606] PCI: Using MMCONFIG for extended config space
[ 0.172611] PCI: Using configuration type 1 for base access
[ 0.176962] bio: create slab <bio-0> at 0
[ 0.177489] ACPI: EC: Look up EC in DSDT
[ 0.184715] ACPI: BIOS _OSI(Linux) query ignored
[ 0.185495] ACPI: Interpreter enabled
[ 0.185504] ACPI: (supports S0 S3 S4 S5)
[ 0.185551] ACPI: Using IOAPIC for interrupt routing
[ 0.193438] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.193446] ACPI: EC: driver started in poll mode
[ 0.193911] ACPI: No dock devices found.
[ 0.195168] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.195183] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.195200] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.195245] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.195393] pci 0000:00:02.0: reg 10 32bit mmio: [0x56380000-0x563fffff]
[ 0.195404] pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7]
[ 0.195413] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
[ 0.195423] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56400000-0x5643ffff]
[ 0.195478] pci 0000:00:02.1: reg 10 32bit mmio: [0x56300000-0x5637ffff]
[ 0.195620] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56440000-0x56443fff]
[ 0.195695] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195704] pci 0000:00:1b.0: PME# disabled
[ 0.195809] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195817] pci 0000:00:1c.0: PME# disabled
[ 0.195926] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.195934] pci 0000:00:1c.2: PME# disabled
[ 0.196056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.196065] pci 0000:00:1c.3: PME# disabled
[ 0.196147] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
[ 0.196227] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
[ 0.196307] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
[ 0.196387] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
[ 0.196471] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56444400-0x564447ff]
[ 0.196546] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.196555] pci 0000:00:1d.7: PME# disabled
[ 0.196757] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.196766] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.196781] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.196847] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.196859] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.196872] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.196884] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.196896] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf]
[ 0.196977] pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df]
[ 0.196989] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff]
[ 0.197002] pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7]
[ 0.197014] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb]
[ 0.197027] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f]
[ 0.197039] pci 0000:00:1f.2: reg 24 32bit mmio: [0x56444000-0x564443ff]
[ 0.197088] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.197096] pci 0000:00:1f.2: PME# disabled
[ 0.197175] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.197301] pci 0000:01:00.0: reg 10 64bit mmio: [0x55200000-0x5523ffff]
[ 0.197317] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.197408] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.197418] pci 0000:01:00.0: PME# disabled
[ 0.197507] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
[ 0.197516] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x562fffff]
[ 0.197529] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
[ 0.197615] pci 0000:02:00.0: reg 10 64bit mmio: [0x54100000-0x5410ffff]
[ 0.197719] pci 0000:02:00.0: supports D1 D2
[ 0.197724] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197734] pci 0000:02:00.0: PME# disabled
[ 0.197827] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.197836] pci 0000:00:1c.2: bridge 32bit mmio: [0x54100000-0x551fffff]
[ 0.197849] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
[ 0.197924] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
[ 0.197933] pci 0000:00:1c.3: bridge 32bit mmio: [0x53000000-0x540fffff]
[ 0.197946] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52000000-0x52ffffff]
[ 0.198028] pci 0000:00:1e.0: transparent bridge
[ 0.198074] pci_bus 0000:00: on NUMA node 0
[ 0.198086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.198427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.198707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.198876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.199036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.199411] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.199427] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.205985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.206219] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.206443] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.206664] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.206887] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.207113] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.207336] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.207559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.207966] SCSI subsystem initialized
[ 0.208079] libata version 3.00 loaded.
[ 0.208130] usbcore: registered new interface driver usbfs
[ 0.208130] usbcore: registered new interface driver hub
[ 0.208139] usbcore: registered new device driver usb
[ 0.208255] ACPI: WMI: Mapper loaded
[ 0.208260] PCI: Using ACPI for IRQ routing
[ 0.220023] Bluetooth: Core ver 2.15
[ 0.220068] NET: Registered protocol family 31
[ 0.220068] Bluetooth: HCI device and connection manager initialized
[ 0.220068] Bluetooth: HCI socket layer initialized
[ 0.220068] NetLabel: Initializing
[ 0.220068] NetLabel: domain hash size = 128
[ 0.220068] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220081] NetLabel: unlabeled traffic allowed by default
[ 0.220149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.220161] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.240027] pnp: PnP ACPI init
[ 0.240066] ACPI: bus type pnp registered
[ 0.243087] pnp: PnP ACPI: found 9 devices
[ 0.243094] ACPI: ACPI bus type pnp unregistered
[ 0.243101] PnPBIOS: Disabled by ACPI PNP
[ 0.243125] system 00:01: ioport range 0x200-0x20f has been reserved
[ 0.243133] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.243140] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.243147] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.243154] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.243161] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.243171] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.243179] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.243186] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.243194] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.243201] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.243209] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.243217] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.278104] AppArmor: AppArmor Filesystem Enabled
[ 0.278188] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.278196] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
[ 0.278207] pci 0000:00:1c.0: MEM window: 0x55200000-0x562fffff
[ 0.278216] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
[ 0.278229] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.278236] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.278247] pci 0000:00:1c.2: MEM window: 0x54100000-0x551fffff
[ 0.278256] pci 0000:00:1c.2: PREFETCH window: 0x00000051000000-0x00000051ffffff
[ 0.278268] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.278275] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 0.278285] pci 0000:00:1c.3: MEM window: 0x53000000-0x540fffff
[ 0.278294] pci 0000:00:1c.3: PREFETCH window: 0x00000052000000-0x00000052ffffff
[ 0.278308] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.278313] pci 0000:00:1e.0: IO window: disabled
[ 0.278322] pci 0000:00:1e.0: MEM window: disabled
[ 0.278329] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.278353] alloc irq_desc for 16 on node -1
[ 0.278358] alloc kstat_irqs on node -1
[ 0.278369] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.278380] pci 0000:00:1c.0: setting latency timer to 64
[ 0.278395] alloc irq_desc for 18 on node -1
[ 0.278399] alloc kstat_irqs on node -1
[ 0.278408] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.278417] pci 0000:00:1c.2: setting latency timer to 64
[ 0.278431] alloc irq_desc for 19 on node -1
[ 0.278435] alloc kstat_irqs on node -1
[ 0.278443] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.278452] pci 0000:00:1c.3: setting latency timer to 64
[ 0.278465] pci 0000:00:1e.0: setting latency timer to 64
[ 0.278475] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.278481] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.278488] pci_bus 0000:01: resource 0 io: [0x3000-0x4fff]
[ 0.278494] pci_bus 0000:01: resource 1 mem: [0x55200000-0x562fffff]
[ 0.278501] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
[ 0.278507] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.278513] pci_bus 0000:02: resource 1 mem: [0x54100000-0x551fffff]
[ 0.278520] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
[ 0.278526] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.278533] pci_bus 0000:03: resource 1 mem: [0x53000000-0x540fffff]
[ 0.278539] pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff]
[ 0.278546] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.278552] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.278628] NET: Registered protocol family 2
[ 0.278835] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.279494] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.280514] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.280966] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.280973] TCP reno registered
[ 0.281217] NET: Registered protocol family 1
[ 0.281351] Trying to unpack rootfs image as initramfs...
[ 0.501100] Switched to high resolution mode on CPU 1
[ 0.504031] Switched to high resolution mode on CPU 0
[ 0.643269] Freeing initrd memory: 7467k freed
[ 0.650316] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.650327] Simple Boot Flag at 0x44 set to 0x1
[ 0.650731] cpufreq-nforce2: No nForce2 chipset.
[ 0.650794] Scanning for low memory corruption every 60 seconds
[ 0.651010] audit: initializing netlink socket (disabled)
[ 0.651039] type=2000 audit(1375522884.648:1): initialized
[ 0.668708] highmem bounce pool size: 64 pages
[ 0.668722] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.672073] VFS: Disk quotas dquot_6.5.2
[ 0.672209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.673529] fuse init (API version 7.12)
[ 0.673748] msgmni has been set to 1732
[ 0.674223] alg: No test for stdrng (krng)
[ 0.674257] io scheduler noop registered
[ 0.674262] io scheduler anticipatory registered
[ 0.674267] io scheduler deadline registered
[ 0.674375] io scheduler cfq registered (default)
[ 0.674402] pci 0000:00:02.0: Boot video device
[ 0.674848] alloc irq_desc for 24 on node -1
[ 0.674854] alloc kstat_irqs on node -1
[ 0.674873] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.674890] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.675117] alloc irq_desc for 25 on node -1
[ 0.675122] alloc kstat_irqs on node -1
[ 0.675137] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 0.675153] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.675366] alloc irq_desc for 26 on node -1
[ 0.675371] alloc kstat_irqs on node -1
[ 0.675385] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.675401] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.675579] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.675805] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.675821] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.676111] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.676126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.676363] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.676377] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.676648] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.676662] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.676898] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.676912] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.677154] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.677168] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7012d20), AE_ALREADY_EXISTS
[ 0.677252] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.677759] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.692700] ACPI: AC Adapter [ACAD] (on-line)
[ 0.692848] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.692856] ACPI: Power Button [PWRF]
[ 0.692956] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.692963] ACPI: Power Button [PWRB]
[ 0.693081] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.694746] ACPI: Lid Switch [LID0]
[ 0.694852] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.694859] ACPI: Sleep Button [SLPB]
[ 0.696149] ACPI: SSDT 3f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.696860] ACPI: SSDT 3f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.698220] Marking TSC unstable due to TSC halts in idle
[ 0.698262] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.698319] processor LNXCPU:00: registered as cooling_device0
[ 0.698328] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.699047] ACPI: SSDT 3f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.699660] ACPI: SSDT 3f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.701186] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.701240] processor LNXCPU:01: registered as cooling_device1
[ 0.701249] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.706242] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.706260] ACPI: Thermal Zone [THRM] (34 C)
[ 0.706401] isapnp: Scanning for PnP cards...
[ 0.713170] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.060378] isapnp: No Plug & Play device found
[ 1.063244] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.065890] brd: module loaded
[ 1.066912] loop: module loaded
[ 1.067090] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.067260] ahci 0000:00:1f.2: version 3.0
[ 1.067290] alloc irq_desc for 17 on node -1
[ 1.067295] alloc kstat_irqs on node -1
[ 1.067309] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.067371] alloc irq_desc for 27 on node -1
[ 1.067376] alloc kstat_irqs on node -1
[ 1.067391] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.067454] ahci: SSS flag set, parallel bus scan disabled
[ 1.067503] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.067511] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 1.067521] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.067900] scsi0 : ahci
[ 1.068173] scsi1 : ahci
[ 1.068310] scsi2 : ahci
[ 1.068453] scsi3 : ahci
[ 1.068815] ata1: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444100 irq 27
[ 1.068822] ata2: DUMMY
[ 1.068828] ata3: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444200 irq 27
[ 1.068833] ata4: DUMMY
[ 1.068992] ata_piix 0000:00:1f.1: version 2.13
[ 1.069022] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.069115] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.069246] scsi4 : ata_piix
[ 1.069396] scsi5 : ata_piix
[ 1.070369] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[ 1.070376] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[ 1.072356] Fixed MDIO Bus: probed
[ 1.072447] PPP generic driver version 2.4.2
[ 1.072662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.072706] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.072739] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.072746] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.072850] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.076765] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.076776] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.076807] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400
[ 1.080867] ata6: port disabled. ignoring.
[ 1.092032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.092212] usb usb1: configuration #1 chosen from 1 choice
[ 1.092277] hub 1-0:1.0: USB hub found
[ 1.092296] hub 1-0:1.0: 8 ports detected
[ 1.092439] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.092482] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.092553] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.092568] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.092575] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.092658] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.092700] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[ 1.092870] usb usb2: configuration #1 chosen from 1 choice
[ 1.092932] hub 2-0:1.0: USB hub found
[ 1.092947] hub 2-0:1.0: 2 ports detected
[ 1.093046] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.093058] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.093065] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.093132] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.093184] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[ 1.093377] usb usb3: configuration #1 chosen from 1 choice
[ 1.093443] hub 3-0:1.0: USB hub found
[ 1.093457] hub 3-0:1.0: 2 ports detected
[ 1.093551] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.093563] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.093570] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.093637] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.093687] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 1.093853] usb usb4: configuration #1 chosen from 1 choice
[ 1.093918] hub 4-0:1.0: USB hub found
[ 1.093933] hub 4-0:1.0: 2 ports detected
[ 1.094024] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.094036] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.094043] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.094109] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.094158] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[ 1.094333] usb usb5: configuration #1 chosen from 1 choice
[ 1.094394] hub 5-0:1.0: USB hub found
[ 1.094408] hub 5-0:1.0: 2 ports detected
[ 1.094600] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.101831] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.105046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.105061] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.105071] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.105081] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.105091] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.105264] mice: PS/2 mouse device common for all mice
[ 1.105576] rtc_cmos 00:03: RTC can wake from S4
[ 1.105658] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.105703] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.105955] device-mapper: uevent: version 1.0.3
[ 1.106189] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.106382] device-mapper: multipath: version 1.1.0 loaded
[ 1.106389] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.106686] EISA: Probing bus 0 at eisa.0
[ 1.106699] Cannot allocate resource for EISA slot 1
[ 1.106704] Cannot allocate resource for EISA slot 2
[ 1.106709] Cannot allocate resource for EISA slot 3
[ 1.106714] Cannot allocate resource for EISA slot 4
[ 1.106719] Cannot allocate resource for EISA slot 5
[ 1.106739] EISA: Detected 0 cards.
[ 1.107126] cpuidle: using governor ladder
[ 1.107383] cpuidle: using governor menu
[ 1.108567] TCP cubic registered
[ 1.108945] NET: Registered protocol family 10
[ 1.109915] lo: Disabled Privacy Extensions
[ 1.110651] NET: Registered protocol family 17
[ 1.110697] Bluetooth: L2CAP ver 2.13
[ 1.110702] Bluetooth: L2CAP socket layer initialized
[ 1.110708] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.110712] Bluetooth: SCO socket layer initialized
[ 1.110810] Bluetooth: RFCOMM TTY layer initialized
[ 1.110817] Bluetooth: RFCOMM socket layer initialized
[ 1.110822] Bluetooth: RFCOMM ver 1.11
[ 1.112470] Using IPI No-Shortcut mode
[ 1.112666] PM: Resume from disk failed.
[ 1.112701] registered taskstats version 1
[ 1.112935] Magic number: 9:322:676
[ 1.113074] rtc_cmos 00:03: setting system clock to 2013-08-03 09:41:25 UTC (1375522885)
[ 1.113084] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.113089] EDD information not available.
[ 1.125404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.388163] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.389702] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.390010] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.390025] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.391872] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.392219] ata1.00: configured for UDMA/133
[ 1.404155] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.408410] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.408724] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.408851] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.408986] sd 0:0:0:0: [sda] Write Protect is off
[ 1.408994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.409074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.409423] sda:
[ 1.500055] Clocksource tsc unstable (delta = -265321317 ns)
[ 1.577033] usb 1-1: configuration #1 chosen from 1 choice
[ 1.653024] sda1 sda2 < sda5 >
[ 1.715411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.728117] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.744360] Freeing unused kernel memory: 540k freed
[ 1.744882] Write protecting the kernel text: 4568k
[ 1.744963] Write protecting the kernel read-only data: 1836k
[ 2.094529] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/input/input6
[ 2.094635] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 2.196640] Linux agpgart interface v0.103
[ 2.207596] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 2.207978] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 2.210881] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 2.282364] [drm] Initialized drm 1.1.0 20060810
[ 2.313514] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.313530] i915 0000:00:02.0: setting latency timer to 64
[ 2.316396] mtrr: no more MTRRs available
[ 2.316408] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.323252] ATL1E 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.323278] ATL1E 0000:01:00.0: setting latency timer to 64
[ 2.548854] [drm] fb0: inteldrmfb frame buffer device
[ 2.548874] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.876206] [drm] LVDS-8: set mode 1024x600 e
[ 3.266685] Console: switching to colour frame buffer device 128x37
[ 8.852432] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 8.852443] EXT4-fs (sda1): write access will be enabled during recovery
[ 9.092140] EXT4-fs (sda1): barriers enabled
[ 10.553139] kjournald2 starting: pid 413, dev sda1:8, commit interval 5 seconds
[ 10.553194] EXT4-fs (sda1): delayed allocation enabled
[ 10.553202] EXT4-fs: file extents enabled
[ 10.594216] EXT4-fs: mballoc enabled
[ 10.594252] EXT4-fs (sda1): recovery complete
[ 10.596958] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.244077] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 13.225055] init: ureadahead main process (443) terminated with status 5
[ 18.902730] <30>udevd[3089]: starting version 175
[ 19.775294] lp: driver loaded but no devices found
[ 20.205796] <30>udevd[3089]: converting old udev database
[ 21.065801] intel_rng: FWH not detected
[ 21.180278] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 21.188262] cfg80211: Calling CRDA to update world regulatory domain
[ 21.382603] Linux video capture interface: v2.00
[ 21.615195] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 21.632503] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input7
[ 21.632607] usbcore: registered new interface driver uvcvideo
[ 21.632615] USB Video Class driver (v0.1.0)
[ 21.750617] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 21.795612] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 22.188938] ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.188965] ath5k 0000:02:00.0: setting latency timer to 64
[ 22.189059] ath5k 0000:02:00.0: registered as 'phy0'
[ 22.279937] ath: EEPROM regdomain: 0x65
[ 22.279943] ath: EEPROM indicates we should expect a direct regpair map
[ 22.279952] ath: Country alpha2 being used: 00
[ 22.279956] ath: Regpair used: 0x65
[ 22.441001] phy0: Selected rate control algorithm 'minstrel'
[ 22.442677] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 22.973543] cfg80211: World regulatory domain updated:
[ 22.973552] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.973561] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.973567] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.973574] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.973580] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.973587] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.203726] type=1505 audit(1375522907.586:2): operation="profile_load" pid=3320 name=/sbin/dhclient
[ 23.204933] type=1505 audit(1375522907.590:3): operation="profile_load" pid=3320 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 23.205604] type=1505 audit(1375522907.590:4): operation="profile_load" pid=3320 name=/usr/lib/connman/scripts/dhclient-script
[ 23.206852] type=1505 audit(1375522907.590:5): operation="profile_replace" pid=3360 name=/sbin/dhclient
[ 23.208099] type=1505 audit(1375522907.594:6): operation="profile_replace" pid=3360 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 23.208752] type=1505 audit(1375522907.594:7): operation="profile_replace" pid=3360 name=/usr/lib/connman/scripts/dhclient-script
[ 23.210182] type=1505 audit(1375522907.594:9): operation="profile_replace" pid=3358 name=/sbin/dhclient
[ 23.210192] type=1505 audit(1375522907.594:8): operation="profile_replace" pid=3321 name=/sbin/dhclient
[ 23.211958] type=1505 audit(1375522907.594:11): operation="profile_replace" pid=3321 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 23.389798] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.389868] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.508186] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[ 23.509188] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 27.507300] Adding 2971984k swap on /dev/sda5. Priority:-1 extents:1 across:2971984k
[ 27.516984] EXT4-fs (sda1): internal journal on sda1:8
[ 28.082346] init: failsafe main process (3491) killed by TERM signal
[ 31.173043] __ratelimit: 21 callbacks suppressed
[ 31.173053] type=1505 audit(1375522915.558:18): operation="profile_load" pid=3545 name=/usr/share/gdm/guest-session/Xsession
[ 31.198252] type=1505 audit(1375522915.582:19): operation="profile_replace" pid=3547 name=/sbin/dhclient
[ 31.199805] type=1505 audit(1375522915.582:20): operation="profile_replace" pid=3547 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 31.200688] type=1505 audit(1375522915.586:21): operation="profile_replace" pid=3547 name=/usr/lib/connman/scripts/dhclient-script
[ 31.207003] type=1505 audit(1375522915.590:22): operation="profile_load" pid=3546 name=/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper
[ 31.208373] type=1505 audit(1375522915.594:23): operation="profile_load" pid=3546 name=/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser
[ 31.345648] type=1505 audit(1375522915.730:24): operation="profile_load" pid=3550 name=/usr/lib/telepathy/mission-control-5
[ 31.347439] type=1505 audit(1375522915.730:25): operation="profile_load" pid=3550 name=/usr/lib/telepathy/telepathy-*
[ 31.453674] type=1505 audit(1375522915.838:26): operation="profile_load" pid=3551 name=/usr/lib/cups/backend/cups-pdf
[ 31.455606] type=1505 audit(1375522915.838:27): operation="profile_load" pid=3551 name=/usr/sbin/cupsd
[ 31.894375] ppdev: user-space parallel port driver
[ 32.229534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.229545] Bluetooth: BNEP filters: protocol multicast
[ 34.340394] init: gdm main process (3682) killed by TERM signal
[ 36.069666] alloc irq_desc for 28 on node -1
[ 36.069680] alloc kstat_irqs on node -1
[ 36.069720] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 36.070447] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.569811] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.713321] CPU0 attaching NULL sched-domain.
[ 48.713336] CPU1 attaching NULL sched-domain.
[ 48.732188] CPU0 attaching sched-domain:
[ 48.732200] domain 0: span 0-1 level SIBLING
[ 48.732209] groups: 0 1
[ 48.732225] CPU1 attaching sched-domain:
[ 48.732233] domain 0: span 0-1 level SIBLING
[ 48.732241] groups: 1 0
[ 49.324871] init: plymouth-stop pre-start process (4074) terminated with status 1
[ 54.520730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.172135] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 55.172856] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 55.554759] CPU0 attaching NULL sched-domain.
[ 55.554774] CPU1 attaching NULL sched-domain.
[ 55.572433] CPU0 attaching sched-domain:
[ 55.572445] domain 0: span 0-1 level SIBLING
[ 55.572454] groups: 0 1
[ 55.572470] CPU1 attaching sched-domain:
[ 55.572478] domain 0: span 0-1 level SIBLING
[ 55.572485] groups: 1 0
[ 55.884751] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 60.030303] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 60.030356] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 62.128074] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 62.129886] wlan0: authenticated
[ 62.129897] wlan0: associate with AP 00:25:15:4d:d6:58
[ 62.140058] wlan0: RX AssocResp from 00:25:15:4d:d6:58 (capab=0x411 status=0 aid=3)
[ 62.140069] wlan0: associated
[ 62.152622] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.326095] padlock: VIA PadLock not detected.
[ 73.056024] wlan0: no IPv6 routers present
[ 3160.892481] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3160.893053] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3160.910455] __ratelimit: 36 callbacks suppressed
[ 3160.910470] gnome-control-c[5854]: segfault at 20 ip 015e3619 sp bffbacf0 error 4 in libnetwork.so[15d7000+16000]
[ 3164.149097] wlan0: deauthenticating by local choice (reason=3)
[ 3164.333221] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3165.536506] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3165.577743] wlan0: direct probe to AP 0a:1d:6a:69:f4:f2 try 1
[ 3165.589089] wlan0 direct probe responded
[ 3165.589101] wlan0: authenticate with AP 0a:1d:6a:69:f4:f2
[ 3165.594300] wlan0: authenticated
[ 3165.594312] wlan0: associate with AP 0a:1d:6a:69:f4:f2
[ 3165.601087] wlan0: RX AssocResp from 0a:1d:6a:69:f4:f2 (capab=0x421 status=0 aid=1)
[ 3165.601099] wlan0: associated
[ 3165.602927] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3165.645106] wlan0: deauthenticating by local choice (reason=3)
[ 3165.854842] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3167.087847] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3167.088105] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3167.088546] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3167.089079] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3168.215442] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3168.215646] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3168.216515] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3168.217075] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3169.856780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3171.545227] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3171.545429] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3171.545912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3171.546447] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3172.944811] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3173.847625] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3173.848436] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3173.851555] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3173.852153] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3176.192760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3177.442391] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3177.443133] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3177.447343] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3177.447921] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3178.538663] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3182.432095] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 3182.432161] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 3184.578532] wlan0: authenticate with AP 00:25:15:4d:d6:58
[ 3184.584091] wlan0: authenticated
[ 3184.584101] wlan0: associate with AP 00:25:15:4d:d6:58
[ 3184.586883] wlan0: RX AssocResp from 00:25:15:4d:d6:58 (capab=0x411 status=0 aid=3)
[ 3184.586895] wlan0: associated
[ 3184.589964] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3187.948041] eth0: no IPv6 routers present
[ 3191.976477] wlan0: deauthenticating by local choice (reason=3)
[ 3192.105750] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3192.977777] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3193.037165] wlan0: deauthenticating by local choice (reason=3)
[ 3193.249772] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3194.419296] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3194.420027] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3194.424140] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3194.424735] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3195.590851] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3195.591063] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3195.591548] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3195.592117] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3197.037757] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3198.118078] ATL1E 0000:01:00.0: irq 28 for MSI/MSI-X
[ 3198.118963] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3198.122195] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 3198.122768] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3208.156042] eth0: no IPv6 routers present
[ 3636.720200] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3636.856661] usb 1-3: configuration #1 chosen from 1 choice
[ 3637.255559] Initializing USB Mass Storage driver...
[ 3637.255968] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3637.260190] usbcore: registered new interface driver usb-storage
[ 3637.260203] USB Mass Storage support registered.
[ 3637.262451] usb-storage: device found at 3
[ 3637.262460] usb-storage: waiting for device to settle before scanning
[ 3642.261050] usb-storage: device scan complete
[ 3642.296348] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.01 PQ: 0 ANSI: 2
[ 3642.302594] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 3642.319156] sd 6:0:0:0: [sdb] 511998 512-byte logical blocks: (262 MB/249 MiB)
[ 3642.321137] sd 6:0:0:0: [sdb] Write Protect is off
[ 3642.321149] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3642.321158] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3642.352137] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3642.352155] sdb:
[ 3642.388777] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3642.388792] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3719.864967] usb 1-3: USB disconnect, address 3
[ 4290.880153] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 4291.016842] usb 1-3: configuration #1 chosen from 1 choice
[ 4291.024236] scsi7 : SCSI emulation for USB Mass Storage devices
[ 4291.028828] usb-storage: device found at 4
[ 4291.028836] usb-storage: waiting for device to settle before scanning
[ 4296.039109] usb-storage: device scan complete
[ 4296.061469] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.01 PQ: 0 ANSI: 2
[ 4296.062934] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 4296.121471] sd 7:0:0:0: [sdc] 511998 512-byte logical blocks: (262 MB/249 MiB)
[ 4296.154136] sd 7:0:0:0: [sdc] Write Protect is off
[ 4296.154149] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 4296.154157] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4296.292548] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4296.292567] sdc:
[ 4296.353379] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4296.353397] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4657.432293] usb 1-3: USB disconnect, address 4

lann · Le 03/08/2013, à 13:40

Une première chose bizarre :

0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=b553993d-534f-49ac-a6bd-91cd8c944262 ro quiet splash

Je ne sais pas quelle version du noyau linux a la version 12.04 mais ce n'est pas 2.6.31-14.

Pourrais-tu faire dans un terminal

sudo apt-get update

et

sudo apt-get upgrade

et

sudo apt-get dist-upgrade

et me donner le cas échéant les erreurs

maria1000 · Le 03/08/2013, à 14:10

La première commande passe sans erreurs.

Les résultats des autres deux commandes sont identiques :

Lecture des listes de paquets...
Construction de l'arbre des dépendances...
Lecture des informations d'état...
Les paquets suivants ont été conservés :
xpdf
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.

lann · Le 03/08/2013, à 14:33

Je pense que tu as encore le chargeur de noyau Grub Legacy
Donc, si c'est le cas, il faudrait que tu installes Grub 2
La procédure est dans cette page : http://doc.ubuntu-fr.org/grub-pc
paragraphe 1.2

maria1000 · Le 03/08/2013, à 15:07

OK, je m'en occupe. Je voudrais vous donner encore quelques informations supplémentaires :

1. Voici quelques messages que j'ai eu pendant la mise à jour :

- impossible d'installer python, python-gobject-2, python-gthglext1, python-sip, _kde.4

- ImportError : lsb_release

autres erreurs pendant l'installation :

- gnome menus
- ubuntu-system-service
- printer driver foo2zjs

cordialement

lann · Le 03/08/2013, à 17:29

Que te donne la commande

apt-cache policy python

et

cat /etc/apt/sources.list

maria1000 · Le 04/08/2013, à 11:08

Bonjour,

1. Effectivement j'avais GRUB LEGACY. Après l'installation la version est GNU GRUB 1.99. A la fin de l'install de GRUB2 j'ai eu le message suivant :
Recréation de /boot/grub/device.map
│
│ Le fichier /boot/grub/device.map a été réécrit afin d'utiliser des noms
│ de périphériques stables. Dans la majorité des cas, cela devrait éviter
│ d'avoir à le modifier dans le futur et les entrées de menu créées par
│ GRUB ne devraient pas être affectées par ce changement.
│
│ Cependant, si la machine comporte plus d'un disque, il est possible que
│ le démarrage dépende de l'ancien système de cartographie des
│ périphériques (« device map »). Vous devriez vérifier s'il existe des
│ entrées de menu de démarrage personnalisées qui se servent encore de la
│ numérotation de disques de GRUB (hdN), puis les mettre à jour si
│ nécessaire.

Reponses aux deux autres questions :

A propos de python :

python:
Installé : 2.7.3-0ubuntu2.2
Candidat : 2.7.3-0ubuntu2.2
Table de version :
*** 2.7.3-0ubuntu2.2 0
500 http://fr.archive.ubuntu.com/ubuntu/ precise-updates/main i386 Packages
100 /var/lib/dpkg/status
2.7.3-0ubuntu2 0
500 http://fr.archive.ubuntu.com/ubuntu/ precise/main i386 Packages
===========================================
cat /etc/apt/sources.liste

# deb cdrom:[Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)]/ karmic main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

deb http://fr.archive.ubuntu.com/ubuntu/ precise main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise universe
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-updates multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu precise partner
deb-src http://archive.canonical.com/ubuntu precise partner

deb http://security.ubuntu.com/ubuntu precise-security main restricted
deb-src http://security.ubuntu.com/ubuntu precise-security main restricted
deb http://security.ubuntu.com/ubuntu precise-security universe
deb-src http://security.ubuntu.com/ubuntu precise-security universe
deb http://security.ubuntu.com/ubuntu precise-security multiverse
deb-src http://security.ubuntu.com/ubuntu precise-security multiverse

Il parait que la version d'ubuntu est toujours 9.10, alors que au demarrage c'est affiché ubuntu 12.04 LST!

Que faire après?

lann · Le 04/08/2013, à 14:51

On va essayer d'enlever le vieux noyau :

Que donne la commande :

aptitude search ^linux | grep ^i

pour info moi j'ai ça :
linux-firmware
linux-generic
linux-headers-3.2.0-35
linux-headers-3.2.0-35-generic
lnux-headers-3.2.0-51
lnux-headers-3.2.0-51-generic
linux-headers-generic
lnux-image-3.2.0-51-generic
lnux-image-3.2.0-35-generic
linux-image-generic
linux-libc-dev
linux-libc-dev-armel-cross
linux-sound-base

maria1000 · Le 07/08/2013, à 10:01

Bonjour,

Voici ce que donne la commande :
aptitude search ^linux | grep ^i

i linux-firmware - Firmware for Linux kernel drivers
i linux-generic - Complete Generic Linux kernel
i A linux-headers-2.6.31-14 - Header files related to Linux kernel versi
i A linux-headers-2.6.31-14-generic - Linux kernel headers for version 2.6.31 on
i linux-headers-2.6.31-15 - Header files related to Linux kernel versi
i linux-headers-2.6.31-15-generic - Linux kernel headers for version 2.6.31 on
i linux-headers-2.6.31-16 - Header files related to Linux kernel versi
i linux-headers-2.6.31-16-generic - Linux kernel headers for version 2.6.31 on
i A linux-headers-2.6.31-19 - Header files related to Linux kernel versi
i A linux-headers-2.6.31-19-generic - Linux kernel headers for version 2.6.31 on
i linux-headers-2.6.31-20 - Header files related to Linux kernel versi
i linux-headers-2.6.31-20-generic - Linux kernel headers for version 2.6.31 on
i A linux-headers-2.6.31-22 - Header files related to Linux kernel versi
i A linux-headers-2.6.31-22-generic - Linux kernel headers for version 2.6.31 on
i A linux-headers-3.2.0-51 - Header files related to Linux kernel versi
i A linux-headers-3.2.0-51-generic - Linux kernel headers for version 3.2.0 on
i linux-headers-generic - En-têtes génériques du noyau linux
i linux-image-2.6.31-14-generic - Linux kernel image for version 2.6.31 on x
i linux-image-2.6.31-15-generic - Linux kernel image for version 2.6.31 on x
i linux-image-2.6.31-16-generic - Linux kernel image for version 2.6.31 on x
i linux-image-2.6.31-19-generic - Linux kernel image for version 2.6.31 on x
i linux-image-2.6.31-20-generic - Linux kernel image for version 2.6.31 on x
i linux-image-2.6.31-22-generic - Linux kernel image for version 2.6.31 on x
i linux-image-3.2.0-51-generic - Linux kernel image for version 3.2.0 on 32
i linux-image-generic - Generic Linux kernel image
i linux-libc-dev - Linux Kernel Headers for development
i linux-sound-base - Paquet de base pour les systèmes de son AL

adhara · Le 07/08/2013, à 10:29

Bonjour Maria 1000,

Pour la suppression des anciens noyaux.

voir la doc : http://doc.ubuntu-fr.org/kernel#suppres … ens_noyaux

maria1000 · Le 07/08/2013, à 12:57

J'ai supprimé les anciens noyaux. Voici c'est qui reste :

i linux-firmware - Firmware for Linux kernel drivers
i linux-generic - Complete Generic Linux kernel
i A linux-headers-2.6.31-22 - Header files related to Linux kernel versi
i A linux-headers-2.6.31-22-generic - Linux kernel headers for version 2.6.31 on
i A linux-headers-3.2.0-51 - Header files related to Linux kernel versi
i A linux-headers-3.2.0-51-generic - Linux kernel headers for version 3.2.0 on
i linux-headers-generic - En-têtes génériques du noyau linux
i linux-image-2.6.31-22-generic - Linux kernel image for version 2.6.31 on x
i linux-image-3.2.0-51-generic - Linux kernel image for version 3.2.0 on 32
i linux-image-generic - Generic Linux kernel image
i linux-libc-dev - Linux Kernel Headers for development
i linux-sound-base - Paquet de base pour les systèmes de son AL

Merci de m'indiquer c'est qu'il faut faire après.

Cordialement,

lann · Le 08/08/2013, à 10:11

Pour tes noyaux il ne te reste plus que deux : donc c'est parfait
De plus tu es à jour du dernier noyau pour la 12.04.
As-tu toujours des soucis pour lancer les logiciels ?
Que donne :

uname -a

maria1000 · Le 14/08/2013, à 18:25

Bonjour,

J'ai effectivement Ubuntu v12.04. Le wifi fonctionne.

Par contre, il y a des messages dans des fenêtres pop-up qui signalent qu'un logiciel ne fonctionne pas. Je voudrais savoir si python est indispensable pour le fonctionnement de cet ordinateur.

Je constate que l'interface graphique a changé depuis la version 9. Avant il y avait un menu dans un bandeau horizontal en haut à l'écran.

J'ai l'impression qu'avant j'avais l'interface Gnome mais pas maintenant ou qu'il ne pas configuré de la même manière.

Cordialement,

adhara · Le 17/08/2013, à 07:57

Bonjour Maria 1000,

Sous la version Ubuntu 12.04.02 LTS il y a l'interface UNITY pour avoir une interface Gnome,il faut ajouter le paquet gnome-session-fallback on le trouve dans synaptic ou dans la logithèque.
Faire un redémarrage de l'ordinateur puis un clic sur le cercle blanc (il est haut dessus de la casse pour mettre le mot de passe) là une fenêtre s'ouvre il y a Unity,Gnome classic (effets),Gnome classic (sans effets) on met celui que l'on souhaite ,on rentre le mot de passe et on a l'interface gnome

Dernière modification par adhara (Le 17/08/2013, à 08:01)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 03/08/2013, à 12:08

SOS mise à niveau de Ubuntu v9.04 vers v12.04

#2 Le 03/08/2013, à 12:26

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#3 Le 03/08/2013, à 12:50

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#4 Le 03/08/2013, à 12:51

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#5 Le 03/08/2013, à 13:22

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#6 Le 03/08/2013, à 13:40

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#7 Le 03/08/2013, à 14:10

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#8 Le 03/08/2013, à 14:33

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#9 Le 03/08/2013, à 15:07

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#10 Le 03/08/2013, à 17:29

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#11 Le 04/08/2013, à 11:08

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#12 Le 04/08/2013, à 14:51

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#13 Le 07/08/2013, à 10:01

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#14 Le 07/08/2013, à 10:29

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#15 Le 07/08/2013, à 12:57

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#16 Le 08/08/2013, à 10:11

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#17 Le 14/08/2013, à 18:25

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

#18 Le 17/08/2013, à 07:57

Re : SOS mise à niveau de Ubuntu v9.04 vers v12.04

Pied de page des forums