Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/09/2013, à 00:53

kpone59168

[RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Bonjour,

Si je viens ici c'est que j'en ai vraiment ma claque de faire-faire et refaire cette installation.
Evidemment je suis Windows 8 comme sa on simplifie encore le problème roll ah et aussi que la machine que j'ai achetée date d'il y à deux jours donc le coup du CC cleaner qui résous tout les problèmes roll roll roll

J'aimerais donc installer la version 12.04 d'ubuntu que j'ai téléchargé. Ensuite comme je désire un dual-boot car j'ai peur de faire n'importe quoi et de me retrouver au final avec un black screen j'ai donc utilisé le logiciel Linux live USB Creator et j'ai installé en mode persistant l'iso.
Je reboot mon pc, je clic sur installation d'ubuntu puis quand il me propose les 3 choix : http://doc.ubuntu-fr.org/_media/install … png?cache=
Je prends celui du haut comme sa j'ai un dual boot et vers la fin de l’installation j'ai un message d'erreur qui me dit que l'execution de grub-install a échoué. J'ai réessayé et sa n'a pas fonctionné.

Et comme je suis super malin j'ai lancé check(je ne sait plus quoi) sur le menu où il nous propose d'essayer ubuntu ou de l'installer et j'ai vu dans son check qu'il manquait un fichier du côté d'un dossier grub2 je penses mais bon étant donné qu'il faut des réflexes de ninja pour capturer de manière visuelle les erreur indiquées je ne puis vous en dire plus. Omis peut être le fait qu'a la fin il m'a indiqué que j'avais 2 erreurs.

-----------

Pour ce qui concerne comment je prépare l’installation car c'est peut être de ma faute, j'ai juste retiré 400 GO de mon C: (c'est totalement débile de débiter autant pour linux je sait) et j'ai créer une nouvelle partition que je nomme ubuntu pour faire simple.

-----------

Enfin voici ma petite question : j'ai eu ce message d'erreur, mais est-ce que ubuntu c'est bien installé dans la partition que j'ai nommé Ubuntu ? car j'avais remarqué que le choix de cohabitation n'était pas proposé si je ne créais pas une nouvelle partition. Mais aussi, par ce message d'erreur, dois-je alors formater de nouveau ma partition nommée ubuntu ?

Si non je vous remercie d'avance de vôtre aide smile

Dernière modification par kpone59168 (Le 27/09/2013, à 00:09)


Sait faire marcher une imprimante

Hors ligne

#2 Le 15/09/2013, à 05:07

malbo

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Les emmerdes pleuvent rapidement quand on est novice et pas trop chanceux. Je te recommande très chaudement de faire deux actions :
1) faire une image disque de ton disque dur complet avec Clonezilla comme expliqué là : http://forum.ubuntu-fr.org/viewtopic.php?id=433035
2) créer un support de récupération de Windows 8 : http://www.vista-xp.fr/forum/topic12430.html
Quand ces précautions seront prises, je te prie de répondre à cette demande : http://doc.ubuntu-fr.org/tutoriel/boot-info
Cela me permettra de vérifier certains points cruciaux pour faire l'installation en dual-boot.

Edit : donne aussi le nom complet de ton modèle d'ordi et son fabricant

Dernière modification par malbo (Le 15/09/2013, à 05:07)

Hors ligne

#3 Le 16/09/2013, à 12:10

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Je fais cela ce soir et je t'envoie cela. Désolé du retard j'avais du travail à faire.


Sait faire marcher une imprimante

Hors ligne

#4 Le 16/09/2013, à 12:21

Nasman

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Rappel :
Avant toute tentative d'installation il faut vérifier que :
- Ubuntu puisse tourner sur le PC - et donc vérifier en mode LiveCD/LiveUSB
- faire l'inventaire des partitions (depuis une session "Live" d'ubuntu) pour savoir si la création de partitions pour Ubuntu sera possible par la commande

sudo fdisk -lu

(effectue l'inventaire des partitions - commande à taper dans un terminal - crtl+alt+t pour l'ouvrir))


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne

#5 Le 16/09/2013, à 17:34

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Quand j'ai tapé sudo fdisk -lu j'ai eu :

ubuntu@ubuntu:~$ sudo fdisk -lu

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x633311ce

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 16.4 GB, 16358768640 bytes
256 heads, 18 sectors/track, 6933 cylinders, total 31950720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          48    31950719    15975336    c  W95 FAT32 (LBA)
ubuntu@ubuntu:~$


Sait faire marcher une imprimante

Hors ligne

#6 Le 17/09/2013, à 06:31

malbo

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

As-tu pris les précautions que j'ai expliquées dans le post #2 ?
Peux-tu répondre également à ma demande de faire un Boot-Info : http://doc.ubuntu-fr.org/tutoriel/boot-info

Hors ligne

#7 Le 19/09/2013, à 12:02

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Bonjour, désolé du temps d'attebnte mais j'ai beaucoup de travail. Voici donc le lien :
http://paste.ubuntu.com/6127800/


Sait faire marcher une imprimante

Hors ligne

#8 Le 20/09/2013, à 05:34

malbo

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 5Sep2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/HP/BIOSUpdate/CryptRSA.efi 
                       /EFI/HP/BIOSUpdate/CryptRSA32.efi 
                       /EFI/HP/BIOSUpdate/HpBiosUpdate.efi 
                       /EFI/HP/BIOSUpdate/HpBiosUpdate32.efi 
                       /EFI/HP/SystemDiags/CryptRSA.efi 
                       /EFI/HP/SystemDiags/CryptRSA32.efi 
                       /EFI/HP/SystemDiags/SystemDiags.efi 
                       /EFI/HP/SystemDiags/SystemDiags32.efi 
                       /EFI/HP/boot/bootmgfw.efi /EFI/HP/boot/bootmgr.efi 
                       /EFI/HP/boot/memtest.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/HP/EFI/Boot/bootx64.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /boot/BCD

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04.3 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda8: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 3581456 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2         821,248     1,353,727       532,480 EFI System partition
/dev/sda3       1,353,728     1,615,871       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       1,615,872   847,883,768   846,267,897 Data partition (Windows/Linux)
/dev/sda5   1,694,152,704 1,903,867,903   209,715,200 Data partition (Windows/Linux)
/dev/sda6   1,903,869,952 1,953,523,711    49,653,760 Data partition (Windows/Linux)
/dev/sda7     847,884,288 1,686,609,919   838,725,632 Data partition (Windows/Linux)
/dev/sda8   1,686,609,920 1,694,152,703     7,542,784 Swap partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 16.4 GB, 16358768640 bytes
256 heads, 18 sectors/track, 6933 cylinders, total 31950720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             48    31,950,719    31,950,672   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        088A16FE8A16E7C8                       ntfs       WINRE
/dev/sda2        0E1B-C6FB                              vfat       
/dev/sda4        762E13142E12CD4D                       ntfs       
/dev/sda5        2E14D4E914D4B4D5                       ntfs       Ubuntu
/dev/sda6        12E01401E013E9AD                       ntfs       RECOVERY
/dev/sda7        2234d593-eaad-4642-ae47-4ba7a04ab42a   ext4       
/dev/sda8        5a24bdb2-fc34-4220-a536-8424e121fe61   swap       
/dev/sdb1        7481-9F48                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sda1        /media/WINRE             fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda4        /media/762E13142E12CD4D  fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda5        /media/Ubuntu            fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda7/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
true
}

insmod part_gpt
insmod ext2
set root='(hd0,gpt7)'
search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.8.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	linux	/boot/vmlinuz-3.8.0-30-generic.efi.signed root=UUID=2234d593-eaad-4642-ae47-4ba7a04ab42a ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.8.0-30-generic
}
menuentry 'Ubuntu, avec Linux 3.8.0-30-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	echo	'Chargement de Linux 3.8.0-30-generic…'
	linux	/boot/vmlinuz-3.8.0-30-generic.efi.signed root=UUID=2234d593-eaad-4642-ae47-4ba7a04ab42a ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial…'
	initrd	/boot/initrd.img-3.8.0-30-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	linux	/boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=2234d593-eaad-4642-ae47-4ba7a04ab42a ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.8.0-29-generic
}
menuentry 'Ubuntu, avec Linux 3.8.0-29-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	echo	'Chargement de Linux 3.8.0-29-generic…'
	linux	/boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=2234d593-eaad-4642-ae47-4ba7a04ab42a ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial…'
	initrd	/boot/initrd.img-3.8.0-29-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_gpt
	insmod ext2
	set root='(hd0,gpt7)'
	search --no-floppy --fs-uuid --set=root 2234d593-eaad-4642-ae47-4ba7a04ab42a
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 8 (loader) (on /dev/sda4)" --class windows --class os {
	insmod part_gpt
	insmod ntfs
	set root='(hd0,gpt4)'
	search --no-floppy --fs-uuid --set=root 762E13142E12CD4D
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Windows Recovery Environment (loader) (on /dev/sda6)" --class windows --class os {
	insmod part_gpt
	insmod ntfs
	set root='(hd0,gpt6)'
	search --no-floppy --fs-uuid --set=root 12E01401E013E9AD
	drivemap -s (hd0) ${root}
	chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda7/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda7 during installation
UUID=2234d593-eaad-4642-ae47-4ba7a04ab42a /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=0E1B-C6FB  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda8 during installation
UUID=5a24bdb2-fc34-4220-a536-8424e121fe61 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda7: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 640.547550201 = 687.782694912  boot/grub/grub.cfg                             1
 404.737476349 = 434.583556096  boot/vmlinuz-3.8.0-29-generic                  1
 800.437107086 = 859.462799360  boot/vmlinuz-3.8.0-29-generic.efi.signed       1
 405.479663849 = 435.380473856  boot/vmlinuz-3.8.0-30-generic                  1
 405.643730164 = 435.556638720  boot/vmlinuz-3.8.0-30-generic.efi.signed       1
 404.737476349 = 434.583556096  vmlinuz                                        1
 405.738006592 = 435.657867264  boot/initrd.img-3.8.0-29-generic               2
 405.636444092 = 435.548815360  boot/initrd.img-3.8.0-30-generic               1
 405.738006592 = 435.657867264  initrd.img                                     2

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)


ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-09-19__12h59 ===================
boot-repair version : 3.199~ppa27~precise
boot-sav version : 3.199~ppa27~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.199~ppa27~precise
boot-repair is executed in live-session (Ubuntu 12.04.3 LTS, precise, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda4:Windows 8 (loader):Windows:chain
/dev/sda6:Windows Recovery Environment (loader):Windows1:chain
/dev/sda7:Ubuntu 12.04.3 LTS (12.04):Ubuntu:linux

=================== blkid:
/dev/sda1: LABEL="WINRE" UUID="088A16FE8A16E7C8" TYPE="ntfs"
/dev/sda2: UUID="0E1B-C6FB" TYPE="vfat"
/dev/sda4: UUID="762E13142E12CD4D" TYPE="ntfs"
/dev/sda7: UUID="2234d593-eaad-4642-ae47-4ba7a04ab42a" TYPE="ext4"
/dev/sda8: UUID="5a24bdb2-fc34-4220-a536-8424e121fe61" TYPE="swap"
/dev/sda5: LABEL="Ubuntu" UUID="2E14D4E914D4B4D5" TYPE="ntfs"
/dev/sda6: LABEL="RECOVERY" UUID="12E01401E013E9AD" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="7481-9F48" TYPE="vfat"


1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

=================== No kernel in /mnt/boot-sav/sda2/boot:
boot.sdi


Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi

=================== sda7/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Aug 20 19:59 grub.d
total 60
-rwxr-xr-x 1 root root 6743 Jul 20 01:29 00_header
-rwxr-xr-x 1 root root 5522 Jul 20 01:15 05_debian_theme
-rwxr-xr-x 1 root root 7780 Jul 20 01:29 10_linux
-rwxr-xr-x 1 root root 6335 Jul 20 01:29 20_linux_xen
-rwxr-xr-x 1 root root 1588 Nov 27  2011 20_memtest86+
-rwxr-xr-x 1 root root 7603 Jul 20 01:29 30_os-prober
-rwxr-xr-x 1 root root 1388 Jul 20 01:29 30_uefi-firmware
-rwxr-xr-x 1 root root  214 Jul 20 01:29 40_custom
-rwxr-xr-x 1 root root   95 Jul 20 01:29 41_custom
-rw-r--r-- 1 root root  483 Jul 20 01:29 README




=================== sda7/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda7: UUID=0E1B-C6FB   (sda2)
Presence of EFI/Boot file detected: /mnt/boot-sav/sda6/EFI/Boot/bootx64.efi
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/WINRE.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/media/762E13142E12CD4D.
sda7	: sda,	not-sepboot,	no-grubenv	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda7.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/media/Ubuntu.
sda6	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda6.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD10JPVT-60A (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name                          Flags
1      1049kB  420MB   419MB   ntfs            Basic data partition          hidden, diag
2      420MB   693MB   273MB   fat32           EFI system partition          boot
3      693MB   827MB   134MB                   Microsoft reserved partition  msftres
4      827MB   434GB   433GB   ntfs            Basic data partition
7      434GB   864GB   429GB   ext4
8      864GB   867GB   3862MB  linux-swap(v1)
5      867GB   975GB   107GB   ntfs            Basic data partition
6      975GB   1000GB  25.4GB  ntfs            Basic data partition          hidden


Model: hp v220w (scsi)
Disk /dev/sdb: 16.4GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      24.6kB  16.4GB  16.4GB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10JPVT-60A;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:693MB:273MB:fat32:EFI system partition:boot;
3:693MB:827MB:134MB::Microsoft reserved partition:msftres;
4:827MB:434GB:433GB:ntfs:Basic data partition:;
7:434GB:864GB:429GB:ext4::;
8:864GB:867GB:3862MB:linux-swap(v1)::;
5:867GB:975GB:107GB:ntfs:Basic data partition:;
6:975GB:1000GB:25.4GB:ntfs:Basic data partition:hidden;

BYT;
/dev/sdb:16.4GB:scsi:512:512:msdos:hp v220w;
1:24.6kB:16.4GB:16.4GB:fat32::boot, lba;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda5 on /media/Ubuntu type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda4 on /media/762E13142E12CD4D type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda1 on /media/WINRE type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type ext4 (rw)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg2 shm snapshot snd stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  c8 e7 16 8a fe 16 8a 08  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: boot
EFI  . Please report this message to boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 fe 1b  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 20 08 00 01 02 00 00  00 00 00 00 02 00 00 00  |. ..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 00 29 fb c6 1b 0e 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 a8 18 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  f0 05 71 32 00 00 00 00  |..........q2....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  4d cd 12 2e 14 13 2e 76  |........M......v|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 b8 fa 64  |........?......d|
00000020  00 00 00 00 80 00 80 00  ff ff 7f 0c 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  d5 b4 d4 14 e9 d4 14 2e  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda6
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 c0 7a 71  |........?.....zq|
00000020  00 00 00 00 80 00 80 00  ff a7 f5 02 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  ad e9 13 e0 01 14 e0 12  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.8G  144M  1.6G   9% /
udev           devtmpfs   1.8G   12K  1.8G   1% /dev
tmpfs          tmpfs      710M  920K  709M   1% /run
/dev/sdb1      vfat        16G  1.9G   14G  13% /cdrom
/dev/loop0     squashfs   667M  667M     0 100% /rofs
tmpfs          tmpfs      1.8G   32K  1.8G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.8G   80K  1.8G   1% /run/shm
/dev/sda5      fuseblk    100G  108M  100G   1% /media/Ubuntu
/dev/sda4      fuseblk    404G   37G  368G  10% /media/762E13142E12CD4D
/dev/sda1      fuseblk    400M  265M  136M  67% /media/WINRE
/dev/sda2      vfat       256M   91M  166M  36% /mnt/boot-sav/sda2
/dev/sda7      ext4       394G  3.0G  371G   1% /mnt/boot-sav/sda7
/dev/sda6      fuseblk     24G   21G  2.9G  88% /mnt/boot-sav/sda6

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x633311ce

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 16.4 GB, 16358768640 bytes
256 heads, 18 sectors/track, 6933 cylinders, total 31950720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          48    31950719    15975336    c  W95 FAT32 (LBA)


EFI detected. Please check the options.

=================== Default settings
Recommended-Repair
This setting would purge (in order to unsign-grub) and reinstall the grub-efi of sda7, using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



No change has been performed on your computer.
pastebinit  packages needed
W: Duplicate sources.list entry cdrom://Ubuntu 12.04.3 LTS _Precise Pangolin_ - Release amd64 (20130820.1)/ precise/main i386 Packages (/var/lib/apt/lists/Ubuntu%2012.04.3%20LTS%20%5fPrecise%20Pangolin%5f%20-%20Release%20amd64%20(20130820.1)_dists_precise_main_binary-i386_Packages)
W: Duplicate sources.list entry cdrom://Ubuntu 12.04.3 LTS _Precise Pangolin_ - Release amd64 (20130820.1)/ precise/restricted i386 Packages (/var/lib/apt/lists/Ubuntu%2012.04.3%20LTS%20%5fPrecise%20Pangolin%5f%20-%20Release%20amd64%20(20130820.1)_dists_precise_restricted_binary-i386_Packages)
W: You may want to run apt-get update to correct these problems
dpkg-preconfigure: unable to re-open stdin: No such file or directory

Désolé mais je ne vais pas pouvoir te suivre parce que je m'absente 2 semaines. C'est dommage parce que ton partitionnement est merdique et j'espère que Nasman ou quelqu'un d'autre pourra t'aider à refaire ça.

Hors ligne

#9 Le 20/09/2013, à 11:48

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Ok, merci de ton aide et j'espère que quelqu'un saura m'aider smile


Sait faire marcher une imprimante

Hors ligne

#10 Le 23/09/2013, à 11:54

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Quelqu'un sait ce que je dois faire ? j'ai recherché sur le net et personne ne m'a répondu même dans les autres forums.


Sait faire marcher une imprimante

Hors ligne

#11 Le 23/09/2013, à 13:58

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

parce que ton probleme est un de ces rares trop recents, trop peu d'usagers ont le recul technique necessaire (ceux qui l'ont n'ont souvent pas le tps)

resume de ton boot-info :
- un disque de 1000mo, donc une table de partitions gpt
- une ou plusieurs partitions ntfs qui laissent penser qu'il y a eu deux installations w8, dont une pas complete (celle d'origine du fabricant oem, et celle fournie par le cd?w8?)
- une install ubuntu non terminee
- l'image iso linux dans les 16go est une mauvaise idee car tu ne comprends pas ce que tu fais (si tu comprenais tu saurais comment rectifier ton erreur tout seul)
- quand on debute, il est conseille de ne pas compliquer la situation

pour resoudre simplement :
- sauve tes donnees
- reinstalle w8 en prenant soin d'effacer les partitions ntfs qui ne servent pas : tu dois conserver winre, winsys, efi
(il est etrange que le fabricant oem ait separe le boot de efi)
- reinstalle ubuntu
- installe un boot manager cote w8 pour lancer ubuntu
- si tu ne comprends rien de ce qui est dit, ne fais rien ... a la place, achete, lis une doc sur w8 + les doc maintenance du fabricant oem de ton ordi.

Hors ligne

#12 Le 23/09/2013, à 14:04

Nyrhu

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Avec Windows 8 et un dual-boot, Windows 8 démarre, il propose l'autre OS puis l'ordi redémarre sous cet OS. Donc Windows 8 est le 1er OS. Chez moi c'est ainsi que ça fonctionnait.

C'est pour éviter tous ces problèmes et chipotages du dual-boot que je préfère être 100% Linux ou 100 % Windows, de plus, si tu as besoin d'un dual-boot avec Windows, reste sous Windows wink Sinon, il y a moyen de ne plus dépendre de Windows.

Et enfin, évitez d'installer autre choses que Windows sur les PC portable récent distribués dans le grand commerce car ils sont fait pour Windows ! Dirigiez-vous vers des boutique spécialisées Linux ou vers les portables Dell pour Ubuntu. Le mieux reste un ordinateur desktop full AMD (CPU et CG).

Dernière modification par Nyrhu (Le 23/09/2013, à 14:06)

Hors ligne

#13 Le 23/09/2013, à 17:00

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Mokay je vais voir pour réinstaller W8.


Sait faire marcher une imprimante

Hors ligne

#14 Le 24/09/2013, à 17:12

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Excusez moi mais j'ai un problème sur les partitions, je ne sait pas lesquelles supprimer. J'ai actuellement 5 partitions :
RECOVERY E: (de type base et rien indiqué dans le système de fichier et le statut (partition OEM)
un autre RECOVERY E: (de type base et NTFS dans le système de fichier et le statut (partition OEM) étonnamment il à exactement la même taille que l'autre partition recovery
C: type base status NTFS statut démarer, fichier d'échange, vidage sur...
et j'ai 3 autres partitions sans nom mais qui ne sont pas utilisés (100% d'espace libre) dans volume de type base et pour les statut j'ai partition de récupération, un autre parition EFI, un autre partition principale

Je crois que c'est de ma faute que sa me fait sa donc j'ai pas trop envie de faire une mauvaise manip donc je vous demande au cas où. Ah et je me demandais si jamais je ne faisait pas une fausse manip, lors de la préparation à l’installation d'ubuntu, faut bien créer une nouvelle partition basique et l'appeler comme on le souhaite pour pouvoir créer un dual boot, c'est bien cela ?


Sait faire marcher une imprimante

Hors ligne

#15 Le 24/09/2013, à 20:00

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

c'est pour ca que j'ai conseille que tu lises la doc w8 et la doc fournie par le fabricant oem de ton ordi, qui a prevu un recovery a sa sauce perso (la part winre)

bon nous on veut bien t'aider pour cette partie, mais comment on fait si on n'a pas le modele de l'ordi , hein ?

Hors ligne

#16 Le 24/09/2013, à 20:47

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Ah ben heu... je vois pas trop ce que vous voulez dire par modèle. Vous entendez les composants ou le nom de de la machine fabriquée ? Car si vous parlez du nom de la machine ben je ne sait pas où sa se trouve XD
Pour commencer je dirais que j'ai un HP.


Sait faire marcher une imprimante

Hors ligne

#17 Le 25/09/2013, à 10:20

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

le nom du modele quand c'est achete tout fait : c'est meme affiche dessus/devant
si c'est neuf, il y a la doc du fabricant oem avec ... chaque fabricant oem a une procedure particuliere pour la restauration (le fameux recovery) qui est different d'une installation normale avec des disques vierges et des composants d'assembleurs ... et d'ailleurs question legalite et licence w8, tu ne peux pas melanger les deux : la licence d'un w8 en boite est different de la licence allouee par le fabricant oem ...

Hors ligne

#18 Le 25/09/2013, à 11:53

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Ah oui, j'ai regardé partout sur mon ordi portable pour voir le model avant de poster ma réponse et je n'avais rien trouvé. Rien trouvé jusqu'a ce que je penses à ouvrir l'ordinateur et regarder en haut à droite de l'écran...
Bref, le model de mon ordinateur portable est HP pavilion g6. je ne sait pas si sa impacte (surement pas) mais il est blanc soit sa ferait le HP pavilion g6 white.

Dernière modification par kpone59168 (Le 25/09/2013, à 11:55)


Sait faire marcher une imprimante

Hors ligne

#19 Le 26/09/2013, à 11:23

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

il manque qqs chiffres
le modele est du genre : HP Pavilion g6-2355sf
regarde en dessous de l'ordi ... (selon les modeles, ce n'est pas la meme touche de clavier pour la restauration)

Hors ligne

#20 Le 26/09/2013, à 11:56

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Il n'y à rien d'écrit sous mon pc portable du coup j'ai tapé wmic csproduct get name, identifyingnumber dans la cmd et j'ai : 5CD325C58R (le numéro d'identification) et en name j'ai HP Pavilion g6 Notebook PC.

Si non j'aimerais savoir si il ne serait pas plus simple d'abandonner le dual boot et de supprimer windows en le remplaçant par ubuntu (soit dans l’installation faire supprimer windows et installer ubuntu) car je ne voudrait pas trop vous déranger mais c'est surtout car j'ai vraiment besoin de mon ordinateur portable sous linux (de préférence ubuntu car j'aime plus l'interface et car je n'ai pas besoin d'aller trop loin).


Sait faire marcher une imprimante

Hors ligne

#21 Le 26/09/2013, à 12:31

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

tu es certain de ne pas avoir un petit manuel hp avec ton ordi ? genre guide de l'utilisateur ... w8 doit etre sauve sur des cd et un flash au cas ou ...

si ton bios est capable de couper l'uefi, ce serait mieux ...

Dernière modification par J5012 (Le 26/09/2013, à 12:32)

Hors ligne

#22 Le 26/09/2013, à 14:29

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Non pas de manuel, j'ai juste eu une petite doc tuto w8 et y'a rien dessus.

EDIT : je n'ai jamais eu accès à un menu uefi de ma vie XD enfin un uefi c'est sa : http://www.materiel.net/minisites/guide … /UEFI2.jpg
Si oui ben j'ai jamais vu sa de ma vie XD j'en avais entendu parler mais je ne vois pas en quoi c'est important.

Mais c'est si important que sa tout ce système de répartitions. Si je prend lili, que je dl ubuntu (unity) et que je met dans mon pc et que je fais installer, je n'aurais pas de problèmes comme j'ai eu ?

Dernière modification par kpone59168 (Le 26/09/2013, à 15:16)


Sait faire marcher une imprimante

Hors ligne

#23 Le 26/09/2013, à 20:09

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

Au pire j'ai là un pc fixe. Y'a pas une méthode du style mac gyver ? du genre je supprime toute mes partitions, soit mon pc deviens vierge et là je met une clé usb et il me lance ubuntu et là l’installation fonctionne ?
Car là sa commence un peut à m'échauffer cette histoire que maintenant que j'ai un dual boot ou pas m'est totalement égal.

PS le model de mon ordi portable exact est : HP pavilion g6-2325sf. J'ai retiré la batterie pour voir si le numéros ne serait pas là et par chance, il y est smile
Je m'excuse encore des problèmes que je vous occasionne.


Sait faire marcher une imprimante

Hors ligne

#24 Le 27/09/2013, à 00:09

kpone59168

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

RESOLU, j'ai réfléchis calmement au problème et j'ai tout simple tout viré. j'ai viré windows entièrement et enfin j'ai juste installé ubuntu et il fonctionne.
merci de vôtre aide smile


Sait faire marcher une imprimante

Hors ligne

#25 Le 27/09/2013, à 08:14

J5012

Re : [RESOLU] j'ai essayé 3 fois d'installer sans succès Ubuntu

ben voila !
au debut du sujet, tu ne dis pas que le dualboot n'est pas important ... nous on peut pas deviner hein ?

perso quand j'achete un ordi avec w dedans et que je peux pas me faire rembourser (parcours du combattant tout ca ... grrr), je le sauvegarde avec la methode fournie par principe (je l'ai paye !), et puis ensuite couic ...

et voilaun ubuntu tout neuf wink

Hors ligne