#1 Le 22/09/2013, à 13:44
- Deuchnord
[RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Bonjour,
Je viens de faire l'erreur d'installer sur mon Ubuntu fraîchement installé un des pilotes propriétaires NVIDIA proposés par l'utilitaire Jockey et, depuis, Unity refuse de se lancer : seul le fond d'écran s'affiche, j'entends Skype se lancer (puisqu'il produit un petit son lors de son lancement)... Et c'est tout : pas de lanceur, pas de tableau de bord, rien !
Étant donné que tout fonctionnait très bien avant l'installation de ce pilote, je le supprime en me disant que tout rentrera dans l'ordre, mais non. Actuellement, je ne peux plus utiliser Unity, seul LXDE (que j'ai pu installer via un terminal) fonctionne.
Quelqu'un aurait une idée de la manière dont je pourrais résoudre ce problème, de préférence sans réinstaller tout le système ?
Merci d'avance
Dernière modification par Deuchnord (Le 25/09/2013, à 19:06)
Hors ligne
#2 Le 23/09/2013, à 15:01
- Deuchnord
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Pas d'idée ? 
Hors ligne
#3 Le 24/09/2013, à 02:29
- hibou7
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
J'ai eu un truc du genre il y a quelque mois.
J'ai pu m'en tirer tout juste sans tout réinstaller, en recréant ma session:
http://forum.ubuntu-fr.org/viewtopic.ph … #p13009151
J'avais juste perdu l'accès à une des sessions de ma machine.
Je crois que cela ne correspond pas à ta situation.
Sinon une sauvegarde + réinstallation devrait le faire oui.
Xubuntu 22.04 sur HP ENVY TS Sleekbook 4 | CPU: Intel Core i5-3337U | RAM: 8 Gio
Débuter en Console
Si GNU/Linux ne répond plus, le redémarrer proprement avec la combinaison de touches:
Alt + SysRq + REISUB (Retourne en Islande sur un bateau).
Hors ligne
#4 Le 24/09/2013, à 19:13
- Deuchnord
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Effectivement, je ne pense pas que cela corresponde à ma situation non plus
En fait je crois que c'est plus un problème de pilote graphique : peut-être que je me trompe lourdement, mais à mon avis le pilote générique utilisé par Ubuntu a été supprimé et remplacé par celui que j'ai demandé sur Jockey, mais n'a pas été rétabli lors de la suppression dudit pilote...
Si c'est le cas, la question est : comment réinstaller le pilote générique ? ^^'
Hors ligne
#5 Le 24/09/2013, à 20:52
- classdroogies
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Salut,
Si tu dispose d'un affichage normal sous LXDE, il y a de forte chance pour que se soit le pilote libre qui soit utilisé.
L'installation du pilote proprio ne supprime pas le pilote libre.
Il faudrait nous dire comment tu as désinstallé le pilote nvidia.
Et nous donner le contenu des fichiers suivant après t'être loguer avec unity (utilise un TTY) :
sudo cat /var/log/lightdm/x-0-greeter.logcat /var/log/Xorg.0.logEssaye également de te loguer en session invité avec unity pour voir si le problème n'est pas lié à l'utilisateur....
Hors ligne
#6 Le 24/09/2013, à 21:21
- Deuchnord
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Salut,
Merci pour votre aide 
classdroogies a écrit :
Il faudrait nous dire comment tu as désinstallé le pilote nvidia.
En fait j'ai utilisé l'interface de Jockey : j'ai tout bêtement cliqué sur le pilote NVIDIA, puis sur le bouton « Désactiver ».
Petite précision : Jockey n'était pas installé (je suis sous Ubuntu 12.10), je l'avais donc installé via APT-GET.
Les résultats de la commande que tu as demandée arrivent 
Hors ligne
#7 Le 24/09/2013, à 21:33
- Deuchnord
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Voici les résultats des commandes :
# cat /var/log/lightdm/x-0-greeter.log
Activating service name='org.a11y.atspi.Registry'
[+0,00s] DEBUG: unity-greeter.vala:441: Starting unity-greeter 12.10.4 UID=104 LANG=fr_FR.UTF-8
[+0,00s] DEBUG: unity-greeter.vala:444: Setting cursor
[+0,00s] DEBUG: unity-greeter.vala:458: Loading command line options
[+0,00s] DEBUG: unity-greeter.vala:486: Setting GTK+ settings
Successfully activated service 'org.a11y.atspi.Registry'
** (at-spi2-registryd:2661): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
** (at-spi2-registryd:2661): WARNING **: Unable to register client with session manager
[+0,04s] DEBUG: unity-greeter.vala:509: Creating Unity Greeter
[+0,04s] DEBUG: unity-greeter.vala:55: Creating background surface
[+0,04s] DEBUG: Connecting to display manager...
[+0,04s] DEBUG: Wrote 17 bytes to daemon
[+0,04s] DEBUG: Read 8 bytes from daemon
[+0,04s] DEBUG: Read 149 bytes from daemon
[+0,04s] DEBUG: Connected version=1.4.0 default-session=ubuntu show-manual-login=false hide-users=false has-guest-account=true show-remote-login=true
[+0,08s] DEBUG: menubar.vala:342: LANG=fr_FR.UTF-8 LANGUAGE=(null)
[+0,08s] CRITICAL: dbusmenu_client_get_root: assertion `DBUSMENU_IS_CLIENT(client)' failed
[+0,08s] CRITICAL: dbusmenu_menuitem_get_children: assertion `DBUSMENU_IS_MENUITEM(mi)' failed
[+0,08s] DEBUG: indicator-session.c:390 setting a11y to "Système"
[+0,09s] DEBUG: indicator-session.c:425 setting icon to "system-shutdown-panel"
[+0,09s] DEBUG: menubar.vala:562: Adding indicator object 0xe8c1e8 at position 0
[+0,09s] DEBUG: Evaluating bitmask for '%H:%M'
[+0,09s] DEBUG: Checking against 1 possible times
[+0,10s] DEBUG: Guessing max time width: 36
[+0,10s] DEBUG: menubar.vala:562: Adding indicator object 0xe9c758 at position 1
[+0,10s] WARNING: IndicatorObject class does not have an accessible description.
[+0,10s] WARNING: IndicatorObject class does not have an accessible description.
[+0,10s] DEBUG: menubar.vala:562: Adding indicator object 0xe996d8 at position 2
[+0,10s] DEBUG: menubar.vala:360: LANG=fr_FR.UTF-8 LANGUAGE=(null)
[+0,11s] DEBUG: Loading users from org.freedesktop.Accounts
[+0,11s] DEBUG: Loading user /org/freedesktop/Accounts/User1000
[+0,13s] DEBUG: Loading sessions from org.freedesktop.DisplayManager
[+0,13s] DEBUG: user-list.vala:950: Adding/updating user jerome (Jérôme)
[+0,13s] DEBUG: user-list.vala:932: Adding guest account entry
[+0,20s] DEBUG: Loaded session /usr/share/xsessions/LXDE.desktop (LXDE, LXDE - Lightweight X11 desktop environment)
[+0,20s] DEBUG: Loaded session /usr/share/xsessions/openbox.desktop (Openbox, Log in using the Openbox window manager (without a session manager))
[+0,20s] DEBUG: Ignoring session /usr/share/xsessions/openbox-kde.desktop
[+0,20s] DEBUG: Loaded session /usr/share/xsessions/openbox-gnome.desktop (GNOME/Openbox, Use the Openbox window manager inside of the GNOME desktop environment)
[+0,20s] DEBUG: Loaded session /usr/share/xsessions/ubuntu.desktop (Ubuntu, This session logs you into Ubuntu)
[+0,20s] DEBUG: Ignoring session /usr/share/xsessions/gnome.desktop
[+0,20s] DEBUG: Loaded session /usr/share/lightdm/remote-sessions/freerdp.desktop (FreeRDP, Full Screen RDP session)
[+0,20s] DEBUG: Loaded session /usr/share/lightdm/remote-sessions/uccsconfigure.desktop (UCCS Configure, Setup a UCCS Account)
[+0,20s] DEBUG: Starting authentication for user jerome...
[+0,20s] DEBUG: Wrote 22 bytes to daemon
[+0,35s] DEBUG: Starting authentication for user jerome...
[+0,35s] DEBUG: Wrote 22 bytes to daemon
[+0,35s] DEBUG: main-window.vala:176: Screen is 1366x768 pixels
[+0,35s] DEBUG: main-window.vala:182: Monitor 0 is 1366x768 pixels at 0,0
[+0,35s] DEBUG: unity-greeter.vala:512: Showing greeter
[+0,35s] DEBUG: unity-greeter.vala:201: Showing main window
[+0,36s] DEBUG: New style for time label
[+0,36s] DEBUG: Evaluating bitmask for '%H:%M'
[+0,36s] DEBUG: Checking against 1 possible times
[+0,36s] DEBUG: Guessing max time width: 36
[+0,36s] DEBUG: background.vala:470: Regenerating backgrounds
[+0,36s] DEBUG: background.vala:68: Making background /usr/share/backgrounds/warty-final-ubuntu.png at 1366x768
[+0,36s] DEBUG: New style for time label
[+0,36s] DEBUG: Evaluating bitmask for '%H:%M'
[+0,36s] DEBUG: Checking against 1 possible times
[+0,36s] DEBUG: Guessing max time width: 36
[+0,37s] DEBUG: unity-greeter.vala:530: Starting main loop
[+0,37s] DEBUG: Read 8 bytes from daemon
[+0,37s] DEBUG: Read 36 bytes from daemon
[+0,37s] DEBUG: Ignoring prompt authentication with invalid sequence number 1
[+0,48s] DEBUG: Setting keyboard layout to 'fr oss'
[+0,51s] DEBUG: Read 8 bytes from daemon
[+0,51s] DEBUG: Read 36 bytes from daemon
[+0,51s] DEBUG: Prompt user with 1 message(s)
** Message: applet now removed from the notification area
[+0,54s] DEBUG: set_accessible_desc: setting accessible description to 'Batterie (chargée)'
[+0,54s] DEBUG: icon_policy is: 0 (present==0, charge==1, never==2)
[+0,54s] DEBUG: count_batteries found 1 batteries (0 are charging/discharging)
[+0,54s] DEBUG: should_be_visible: yes
[+0,54s] DEBUG: refresh_entry_accessible_desc: setting entry 0xe995f8 accessible description to 'Batterie (chargée)'
[+0,54s] DEBUG: menubar.vala:562: Adding indicator object 0xe995f8 at position 2
[+0,58s] DEBUG: New style for time label
[+0,58s] DEBUG: Evaluating bitmask for '%H:%M'
[+0,58s] DEBUG: Checking against 1 possible times
[+0,58s] DEBUG: Guessing max time width: 36
[+0,63s] DEBUG: Connected to Application Indicator Service.
[+0,64s] DEBUG: unity-greeter.vala:184: starting system-ready sound
[+0,91s] DEBUG: background.vala:117: Render of background /usr/share/backgrounds/warty-final-ubuntu.png complete
[+0,92s] DEBUG: Request current apps
[+0,94s] DEBUG: Building new application entry: :1.12 with icon: nm-device-wired at position 0
[+0,94s] DEBUG: menubar.vala:562: Adding indicator object 0x10a6da0 at position 4
[+0,94s] DEBUG: notify visible signal received
[+0,94s] CRITICAL: ido_calendar_menu_item_get_calendar: assertion `IDO_IS_CALENDAR_MENU_ITEM (item)' failed
[+0,94s] CRITICAL: gtk_calendar_get_date: assertion `GTK_IS_CALENDAR (calendar)' failed
[+0,94s] CRITICAL: gtk_calendar_select_month: assertion `GTK_IS_CALENDAR (calendar)' failed
[+0,94s] CRITICAL: gtk_calendar_select_day: assertion `GTK_IS_CALENDAR (calendar)' failed
[+0,95s] DEBUG: New calendar item
[+0,95s] DEBUG: Changing calendar property: calendar-marks
[+0,95s] DEBUG: Marks: []
[+0,95s] DEBUG: indicator-sound: new_volume_slider_widget
[+0,95s] DEBUG: indicator-sound: new_voip_slider_widget
[+3,40s] DEBUG: session-list.vala:46: Adding session openbox-gnome (GNOME/Openbox)
[+3,40s] DEBUG: session-list.vala:46: Adding session LXDE (LXDE)
[+3,40s] DEBUG: session-list.vala:46: Adding session openbox (Openbox)
[+3,40s] DEBUG: session-list.vala:46: Adding session ubuntu (Ubuntu)
[+12,32s] DEBUG: Providing response to display manager
[+12,32s] DEBUG: Wrote 28 bytes to daemon
[+12,36s] DEBUG: Read 8 bytes from daemon
[+12,36s] DEBUG: Read 18 bytes from daemon
[+12,36s] DEBUG: Authentication complete for user jerome with return code 0
[+12,37s] DEBUG: Starting session ubuntu
[+12,37s] DEBUG: Wrote 18 bytes to daemon
[+12,37s] DEBUG: Read 8 bytes from daemon
[+12,37s] DEBUG: Read 4 bytes from daemon
** Message: PID 2706 (we are 2706) sent signal 15, shutting down...$ cat /var/log/Xorg.0.log
[ 429.046]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 429.046] X Protocol Version 11, Revision 0
[ 429.046] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 429.046] Current Operating System: Linux jerome-XPS-L501X 3.5.0-40-generic #62-Ubuntu SMP Thu Aug 22 00:55:19 UTC 2013 x86_64
[ 429.046] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-40-generic root=UUID=ce083f96-a64e-4a40-b8ed-0cbab2745826 ro quiet splash vt.handoff=7
[ 429.046] Build Date: 11 April 2013 12:53:36PM
[ 429.046] xorg-server 2:1.13.0-0ubuntu6.2 (For technical support please see http://www.ubuntu.com/support)
[ 429.046] Current version of pixman: 0.26.0
[ 429.046] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 429.046] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 429.046] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 24 21:22:52 2013
[ 429.046] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 429.046] (==) No Layout section. Using the first Screen section.
[ 429.046] (==) No screen section available. Using defaults.
[ 429.046] (**) |-->Screen "Default Screen Section" (0)
[ 429.046] (**) | |-->Monitor "<default monitor>"
[ 429.046] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 429.046] (==) Automatically adding devices
[ 429.046] (==) Automatically enabling devices
[ 429.046] (==) Automatically adding GPU devices
[ 429.047] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 429.047] Entry deleted from font path.
[ 429.047] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 429.047] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 429.047] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 429.047] (II) Loader magic: 0x7f4455ee5c40
[ 429.047] (II) Module ABI versions:
[ 429.047] X.Org ANSI C Emulation: 0.4
[ 429.047] X.Org Video Driver: 13.0
[ 429.047] X.Org XInput driver : 18.0
[ 429.047] X.Org Server Extension : 7.0
[ 429.047] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 429.048] (--) PCI:*(0:0:2:0) 8086:0046:1028:046e rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 429.048] (--) PCI: (0:2:0:0) 10de:0df1:1028:046e rev 161, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 429.048] (II) Open ACPI successful (/var/run/acpid.socket)
[ 429.048] Initializing built-in extension Generic Event Extension
[ 429.048] Initializing built-in extension SHAPE
[ 429.048] Initializing built-in extension MIT-SHM
[ 429.048] Initializing built-in extension XInputExtension
[ 429.048] Initializing built-in extension XTEST
[ 429.048] Initializing built-in extension BIG-REQUESTS
[ 429.048] Initializing built-in extension SYNC
[ 429.048] Initializing built-in extension XKEYBOARD
[ 429.048] Initializing built-in extension XC-MISC
[ 429.048] Initializing built-in extension SECURITY
[ 429.048] Initializing built-in extension XINERAMA
[ 429.048] Initializing built-in extension XFIXES
[ 429.048] Initializing built-in extension RENDER
[ 429.048] Initializing built-in extension RANDR
[ 429.048] Initializing built-in extension COMPOSITE
[ 429.048] Initializing built-in extension DAMAGE
[ 429.048] Initializing built-in extension MIT-SCREEN-SAVER
[ 429.048] Initializing built-in extension DOUBLE-BUFFER
[ 429.048] Initializing built-in extension RECORD
[ 429.048] Initializing built-in extension DPMS
[ 429.048] Initializing built-in extension X-Resource
[ 429.048] Initializing built-in extension XVideo
[ 429.049] Initializing built-in extension XVideo-MotionCompensation
[ 429.049] Initializing built-in extension XFree86-VidModeExtension
[ 429.049] Initializing built-in extension XFree86-DGA
[ 429.049] Initializing built-in extension XFree86-DRI
[ 429.049] Initializing built-in extension DRI2
[ 429.049] (II) LoadModule: "glx"
[ 429.049] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 429.058] (II) Module glx: vendor="NVIDIA Corporation"
[ 429.058] compiled for 4.0.2, module version = 1.0.0
[ 429.058] Module class: X.Org Server Extension
[ 429.058] (II) NVIDIA GLX Module 304.48 Sun Sep 9 20:42:38 PDT 2012
[ 429.058] Loading extension GLX
[ 429.058] (==) Matched intel as autoconfigured driver 0
[ 429.058] (==) Matched intel as autoconfigured driver 1
[ 429.058] (==) Matched vesa as autoconfigured driver 2
[ 429.058] (==) Matched modesetting as autoconfigured driver 3
[ 429.058] (==) Matched fbdev as autoconfigured driver 4
[ 429.058] (==) Assigned the driver to the xf86ConfigLayout
[ 429.058] (II) LoadModule: "intel"
[ 429.058] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 429.058] (II) Module intel: vendor="X.Org Foundation"
[ 429.058] compiled for 1.13.0, module version = 2.20.9
[ 429.058] Module class: X.Org Video Driver
[ 429.058] ABI class: X.Org Video Driver, version 13.0
[ 429.058] (II) LoadModule: "vesa"
[ 429.058] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 429.058] (II) Module vesa: vendor="X.Org Foundation"
[ 429.058] compiled for 1.12.99.902, module version = 2.3.2
[ 429.058] Module class: X.Org Video Driver
[ 429.058] ABI class: X.Org Video Driver, version 13.0
[ 429.058] (II) LoadModule: "modesetting"
[ 429.058] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 429.058] (II) Module modesetting: vendor="X.Org Foundation"
[ 429.058] compiled for 1.13.0, module version = 0.5.0
[ 429.058] Module class: X.Org Video Driver
[ 429.058] ABI class: X.Org Video Driver, version 13.0
[ 429.058] (II) LoadModule: "fbdev"
[ 429.059] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 429.059] (II) Module fbdev: vendor="X.Org Foundation"
[ 429.059] compiled for 1.12.99.902, module version = 0.4.3
[ 429.059] Module class: X.Org Video Driver
[ 429.059] ABI class: X.Org Video Driver, version 13.0
[ 429.059] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 429.059] (II) VESA: driver for VESA chipsets: vesa
[ 429.059] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 429.059] (II) FBDEV: driver for framebuffer: fbdev
[ 429.059] (++) using VT number 7
[ 429.059] (II) intel(0): using device path '/dev/dri/card0'
[ 429.059] (WW) Falling back to old probe method for vesa
[ 429.059] (WW) Falling back to old probe method for modesetting
[ 429.059] (WW) Falling back to old probe method for fbdev
[ 429.059] (II) Loading sub module "fbdevhw"
[ 429.059] (II) LoadModule: "fbdevhw"
[ 429.059] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 429.059] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 429.059] compiled for 1.13.0, module version = 0.0.2
[ 429.060] ABI class: X.Org Video Driver, version 13.0
[ 429.060] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 429.060] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 429.060] (==) intel(0): RGB weight 888
[ 429.060] (==) intel(0): Default visual is TrueColor
[ 429.060] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 429.060] (**) intel(0): Relaxed fencing enabled
[ 429.060] (**) intel(0): Wait on SwapBuffers? enabled
[ 429.060] (**) intel(0): Triple buffering? enabled
[ 429.060] (**) intel(0): Framebuffer tiled
[ 429.060] (**) intel(0): Pixmaps tiled
[ 429.060] (**) intel(0): 3D buffers tiled
[ 429.060] (**) intel(0): SwapBuffers wait enabled
[ 429.060] (==) intel(0): video overlay key set to 0x101fe
[ 429.060] (II) intel(0): Output LVDS1 has no monitor section
[ 429.060] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 429.060] (II) intel(0): Output VGA1 has no monitor section
[ 429.076] (II) intel(0): Output HDMI1 has no monitor section
[ 429.124] (II) intel(0): Output DP1 has no monitor section
[ 429.124] (II) intel(0): EDID for output LVDS1
[ 429.124] (II) intel(0): Manufacturer: LGD Model: 266 Serial#: 0
[ 429.124] (II) intel(0): Year: 2009 Week: 0
[ 429.124] (II) intel(0): EDID Version: 1.3
[ 429.124] (II) intel(0): Digital Display Input
[ 429.124] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 429.124] (II) intel(0): Gamma: 2.20
[ 429.124] (II) intel(0): No DPMS capabilities specified
[ 429.124] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 429.124] (II) intel(0): First detailed timing is preferred mode
[ 429.124] (II) intel(0): redX: 0.607 redY: 0.606 greenX: 0.333 greenY: 0.586
[ 429.124] (II) intel(0): blueX: 0.149 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 429.124] (II) intel(0): Manufacturer's mask: 0
[ 429.124] (II) intel(0): Supported detailed timing:
[ 429.124] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 429.124] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 429.124] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 429.124] (II) intel(0): Supported detailed timing:
[ 429.124] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 429.124] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 429.124] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 429.124] (II) intel(0): 1K0R2\80156WH2
[ 429.124] (II) intel(0): Unknown vendor-specific block 0
[ 429.124] (II) intel(0): EDID (in hex):
[ 429.124] (II) intel(0): 00ffffffffffff0030e4660200000000
[ 429.124] (II) intel(0): 00130103802213780a94659b9b559626
[ 429.124] (II) intel(0): 0f505400000001010101010101010101
[ 429.124] (II) intel(0): 010101010101121b567850000e302020
[ 429.124] (II) intel(0): 240058c210000019121b567850000e30
[ 429.124] (II) intel(0): 2020240058c210000019000000fe0031
[ 429.124] (II) intel(0): 4b305232803135365748320a00000000
[ 429.124] (II) intel(0): 00ffffffffffffffff01010a20200070
[ 429.124] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 429.124] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 429.125] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 429.125] (II) intel(0): Printing probed modes for output LVDS1
[ 429.125] (II) intel(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 429.125] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 429.125] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 429.125] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 429.125] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 429.125] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 429.125] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 429.125] (II) intel(0): EDID for output VGA1
[ 429.140] (II) intel(0): EDID for output HDMI1
[ 429.188] (II) intel(0): EDID for output DP1
[ 429.188] (II) intel(0): Output LVDS1 connected
[ 429.188] (II) intel(0): Output VGA1 disconnected
[ 429.188] (II) intel(0): Output HDMI1 disconnected
[ 429.188] (II) intel(0): Output DP1 disconnected
[ 429.188] (II) intel(0): Using exact sizes for initial modes
[ 429.188] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 429.188] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 429.188] (II) intel(0): Kernel page flipping support detected, enabling
[ 429.188] (==) intel(0): DPI set to (96, 96)
[ 429.188] (II) Loading sub module "fb"
[ 429.188] (II) LoadModule: "fb"
[ 429.188] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 429.188] (II) Module fb: vendor="X.Org Foundation"
[ 429.188] compiled for 1.13.0, module version = 1.0.0
[ 429.188] ABI class: X.Org ANSI C Emulation, version 0.4
[ 429.188] (II) Loading sub module "dri2"
[ 429.188] (II) LoadModule: "dri2"
[ 429.188] (II) Module "dri2" already built-in
[ 429.188] (II) UnloadModule: "vesa"
[ 429.188] (II) Unloading vesa
[ 429.189] (II) UnloadModule: "modesetting"
[ 429.189] (II) Unloading modesetting
[ 429.189] (II) UnloadModule: "fbdev"
[ 429.189] (II) Unloading fbdev
[ 429.189] (II) UnloadSubModule: "fbdevhw"
[ 429.189] (II) Unloading fbdevhw
[ 429.189] (==) Depth 24 pixmap format is 32 bpp
[ 429.189] (II) intel(0): [DRI2] Setup complete
[ 429.189] (II) intel(0): [DRI2] DRI driver: i965
[ 429.189] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 429.200] (II) UXA(0): Driver registered support for the following operations:
[ 429.200] (II) solid
[ 429.200] (II) copy
[ 429.200] (II) composite (RENDER acceleration)
[ 429.200] (II) put_image
[ 429.200] (II) get_image
[ 429.200] (==) intel(0): Backing store disabled
[ 429.200] (==) intel(0): Silken mouse enabled
[ 429.200] (II) intel(0): Initializing HW Cursor
[ 429.200] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 429.201] (==) intel(0): DPMS enabled
[ 429.201] (==) intel(0): Intel XvMC decoder enabled
[ 429.201] (II) intel(0): Set up textured video
[ 429.201] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 429.201] (II) intel(0): direct rendering: DRI2 Enabled
[ 429.201] (==) intel(0): hotplug detection: "enabled"
[ 429.216] (--) RandR disabled
[ 429.226] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 429.226] (II) intel(0): Setting screen physical size to 361 x 203
[ 429.237] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 429.239] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 429.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 429.239] (II) LoadModule: "evdev"
[ 429.239] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 429.239] (II) Module evdev: vendor="X.Org Foundation"
[ 429.239] compiled for 1.13.0, module version = 2.7.3
[ 429.239] Module class: X.Org XInput Driver
[ 429.239] ABI class: X.Org XInput driver, version 18.0
[ 429.239] (II) Using input driver 'evdev' for 'Power Button'
[ 429.239] (**) Power Button: always reports core events
[ 429.239] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 429.239] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 429.239] (--) evdev: Power Button: Found keys
[ 429.239] (II) evdev: Power Button: Configuring as keyboard
[ 429.239] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 429.239] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 429.239] (**) Option "xkb_rules" "evdev"
[ 429.239] (**) Option "xkb_model" "pc105"
[ 429.239] (**) Option "xkb_layout" "fr"
[ 429.239] (**) Option "xkb_variant" "oss"
[ 429.240] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 429.241] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 429.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 429.241] (II) Using input driver 'evdev' for 'Video Bus'
[ 429.241] (**) Video Bus: always reports core events
[ 429.241] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 429.241] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 429.241] (--) evdev: Video Bus: Found keys
[ 429.241] (II) evdev: Video Bus: Configuring as keyboard
[ 429.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event13"
[ 429.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 429.241] (**) Option "xkb_rules" "evdev"
[ 429.241] (**) Option "xkb_model" "pc105"
[ 429.241] (**) Option "xkb_layout" "fr"
[ 429.241] (**) Option "xkb_variant" "oss"
[ 429.241] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 429.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 429.241] (II) Using input driver 'evdev' for 'Video Bus'
[ 429.241] (**) Video Bus: always reports core events
[ 429.241] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 429.241] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 429.241] (--) evdev: Video Bus: Found keys
[ 429.241] (II) evdev: Video Bus: Configuring as keyboard
[ 429.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12/event12"
[ 429.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 429.241] (**) Option "xkb_rules" "evdev"
[ 429.241] (**) Option "xkb_model" "pc105"
[ 429.241] (**) Option "xkb_layout" "fr"
[ 429.241] (**) Option "xkb_variant" "oss"
[ 429.242] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 429.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 429.242] (II) Using input driver 'evdev' for 'Power Button'
[ 429.242] (**) Power Button: always reports core events
[ 429.242] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 429.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 429.242] (--) evdev: Power Button: Found keys
[ 429.242] (II) evdev: Power Button: Configuring as keyboard
[ 429.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 429.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 429.242] (**) Option "xkb_rules" "evdev"
[ 429.242] (**) Option "xkb_model" "pc105"
[ 429.242] (**) Option "xkb_layout" "fr"
[ 429.242] (**) Option "xkb_variant" "oss"
[ 429.242] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 429.242] (II) No input driver specified, ignoring this device.
[ 429.242] (II) This device may have been added with another device file.
[ 429.242] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 429.242] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 429.242] (II) Using input driver 'evdev' for 'Sleep Button'
[ 429.242] (**) Sleep Button: always reports core events
[ 429.242] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 429.242] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 429.242] (--) evdev: Sleep Button: Found keys
[ 429.242] (II) evdev: Sleep Button: Configuring as keyboard
[ 429.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 429.242] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 429.242] (**) Option "xkb_rules" "evdev"
[ 429.242] (**) Option "xkb_model" "pc105"
[ 429.242] (**) Option "xkb_layout" "fr"
[ 429.242] (**) Option "xkb_variant" "oss"
[ 429.243] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 429.243] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event10)
[ 429.243] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 429.243] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 429.243] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 429.243] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event10"
[ 429.243] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[ 429.243] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 429.243] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 429.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 429.243] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 429.243] (**) Option "xkb_rules" "evdev"
[ 429.243] (**) Option "xkb_model" "pc105"
[ 429.243] (**) Option "xkb_layout" "fr"
[ 429.243] (**) Option "xkb_variant" "oss"
[ 429.243] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event14)
[ 429.243] (II) No input driver specified, ignoring this device.
[ 429.243] (II) This device may have been added with another device file.
[ 429.243] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event15)
[ 429.243] (II) No input driver specified, ignoring this device.
[ 429.243] (II) This device may have been added with another device file.
[ 429.244] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event16)
[ 429.244] (II) No input driver specified, ignoring this device.
[ 429.244] (II) This device may have been added with another device file.
[ 429.244] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event17)
[ 429.244] (II) No input driver specified, ignoring this device.
[ 429.244] (II) This device may have been added with another device file.
[ 429.244] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 429.244] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 429.244] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 429.244] (**) Logitech USB Receiver: always reports core events
[ 429.244] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 429.244] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 429.244] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 429.244] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 429.244] (--) evdev: Logitech USB Receiver: Found relative axes
[ 429.244] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 429.244] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 429.244] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 429.244] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 429.244] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 429.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input8/event8"
[ 429.244] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 429.244] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 429.244] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 429.244] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 429.244] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 429.244] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 429.245] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 429.245] (II) No input driver specified, ignoring this device.
[ 429.245] (II) This device may have been added with another device file.
[ 429.245] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 429.245] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 429.245] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 429.245] (**) Logitech USB Receiver: always reports core events
[ 429.245] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[ 429.245] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 429.245] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 429.245] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 429.245] (--) evdev: Logitech USB Receiver: Found relative axes
[ 429.245] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 429.245] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 429.245] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 429.245] (--) evdev: Logitech USB Receiver: Found keys
[ 429.245] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 429.245] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 429.245] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 429.245] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 429.245] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 429.245] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-1/3-1.4/3-1.4:1.1/input/input9/event9"
[ 429.245] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 429.245] (**) Option "xkb_rules" "evdev"
[ 429.245] (**) Option "xkb_model" "pc105"
[ 429.245] (**) Option "xkb_layout" "fr"
[ 429.245] (**) Option "xkb_variant" "oss"
[ 429.245] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 429.245] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 429.245] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 429.245] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 429.245] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 429.245] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 429.245] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event5)
[ 429.245] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 429.245] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 429.245] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 429.245] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event5"
[ 429.245] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 429.245] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 429.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.0/input/input5/event5"
[ 429.246] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 14)
[ 429.246] (**) Option "xkb_rules" "evdev"
[ 429.246] (**) Option "xkb_model" "pc105"
[ 429.246] (**) Option "xkb_layout" "fr"
[ 429.246] (**) Option "xkb_variant" "oss"
[ 429.246] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event6)
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev pointer catchall"
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 429.246] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 429.246] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event6"
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found 9 mouse buttons
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found scroll wheel(s)
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found relative axes
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found x and y relative axes
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute axes
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Forcing absolute x/y axes to exist.
[ 429.246] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as mouse
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Adding scrollwheel support
[ 429.246] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: YAxisMapping: buttons 4 and 5
[ 429.246] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 429.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.1/input/input6/event6"
[ 429.246] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 15)
[ 429.246] (**) Option "xkb_rules" "evdev"
[ 429.246] (**) Option "xkb_model" "pc105"
[ 429.246] (**) Option "xkb_layout" "fr"
[ 429.246] (**) Option "xkb_variant" "oss"
[ 429.246] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[ 429.246] (WW) evdev: Microsoft Microsoft® Nano Transceiver v1.0: ignoring absolute axes.
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[ 429.246] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
[ 429.247] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/mouse0)
[ 429.247] (II) No input driver specified, ignoring this device.
[ 429.247] (II) This device may have been added with another device file.
[ 429.247] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event7)
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 429.247] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 429.247] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event7"
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found 1 mouse buttons
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found scroll wheel(s)
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found relative axes
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute axes
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute multitouch axes
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found x and y absolute axes
[ 429.247] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 429.247] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Forcing relative x/y axes to exist.
[ 429.247] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as mouse
[ 429.247] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 429.247] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Adding scrollwheel support
[ 429.247] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: YAxisMapping: buttons 4 and 5
[ 429.247] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 429.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.2/input/input7/event7"
[ 429.247] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 16)
[ 429.247] (**) Option "xkb_rules" "evdev"
[ 429.247] (**) Option "xkb_model" "pc105"
[ 429.247] (**) Option "xkb_layout" "fr"
[ 429.247] (**) Option "xkb_variant" "oss"
[ 429.247] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[ 429.247] (WW) evdev: Microsoft Microsoft® Nano Transceiver v1.0: ignoring absolute axes.
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[ 429.247] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
[ 429.248] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/js0)
[ 429.248] (II) No input driver specified, ignoring this device.
[ 429.248] (II) This device may have been added with another device file.
[ 429.248] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 429.248] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 429.248] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 429.248] (**) AT Translated Set 2 keyboard: always reports core events
[ 429.248] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 429.248] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 429.248] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 429.248] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 429.248] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 429.248] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[ 429.248] (**) Option "xkb_rules" "evdev"
[ 429.248] (**) Option "xkb_model" "pc105"
[ 429.248] (**) Option "xkb_layout" "fr"
[ 429.248] (**) Option "xkb_variant" "oss"
[ 429.248] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
[ 429.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 429.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 429.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 429.248] (II) LoadModule: "synaptics"
[ 429.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 429.249] (II) Module synaptics: vendor="X.Org Foundation"
[ 429.249] compiled for 1.12.99.905, module version = 1.6.2
[ 429.249] Module class: X.Org XInput Driver
[ 429.249] ABI class: X.Org XInput driver, version 18.0
[ 429.249] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 429.249] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 429.249] (**) Option "Device" "/dev/input/event18"
[ 429.249] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 429.249] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 429.249] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 429.249] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event18"
[ 429.249] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[ 429.250] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 429.250] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 429.250] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.039
[ 429.250] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 429.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 429.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 429.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 429.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 429.250] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 429.250] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 429.251] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[ 429.251] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 429.251] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 429.251] (**) Dell WMI hotkeys: always reports core events
[ 429.251] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event11"
[ 429.251] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 429.251] (--) evdev: Dell WMI hotkeys: Found keys
[ 429.251] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 429.251] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[ 429.251] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 19)
[ 429.251] (**) Option "xkb_rules" "evdev"
[ 429.251] (**) Option "xkb_model" "pc105"
[ 429.251] (**) Option "xkb_layout" "fr"
[ 429.251] (**) Option "xkb_variant" "oss"
[ 429.631] (II) intel(0): EDID vendor "LGD", prod id 614
[ 429.631] (II) intel(0): Printing DDC gathered Modelines:
[ 429.631] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 429.776] (II) intel(0): EDID vendor "LGD", prod id 614
[ 429.776] (II) intel(0): Printing DDC gathered Modelines:
[ 429.776] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 442.370] (II) intel(0): EDID vendor "LGD", prod id 614
[ 442.370] (II) intel(0): Printing DDC gathered Modelines:
[ 442.370] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 442.597] (II) intel(0): EDID vendor "LGD", prod id 614
[ 442.597] (II) intel(0): Printing DDC gathered Modelines:
[ 442.597] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 442.835] (II) intel(0): EDID vendor "LGD", prod id 614
[ 442.835] (II) intel(0): Printing DDC gathered Modelines:
[ 442.835] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)
[ 463.399] (II) intel(0): EDID vendor "LGD", prod id 614
[ 463.400] (II) intel(0): Printing DDC gathered Modelines:
[ 463.400] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz eP)Je confirme également que le problème a bien lieu sur la session Invité comme sur ma session personnelle.
Hors ligne
#8 Le 24/09/2013, à 22:32
- classdroogies
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Tu es visiblement concerné par ceci :
http://doc.ubuntu-fr.org/bumblebee
http://doc.ubuntu-fr.org/nvidia_optimus
Actuellement tu utilises le GPU intégré Intel.
L'activation du pilote nvidia à mis le bazar, dans un premier temps je supprimerai complètement tout les paquets nvidia ainsi que le fichier xorg.conf.
sudo apt-get remove --purge nvidia*sudo rm /etc/X11/xorg.confPuis tu redémarres.
Dans ta session unity, on va faire un reset, dans un terminal raccourci clavier alt+f2 puis tu tapes gnome-terminal :
dconf reset -f /org/compiz/ && setsid unityHors ligne
#9 Le 25/09/2013, à 19:06
- Deuchnord
Re : [RÉSOLU] Pilote propriétaire NVIDIA fait buguer Unity
Merci beaucoup, la solution que tu as proposée a fonctionné et j'ai retrouvé Unity 
Bonne soirée à vous
Hors ligne