#1 Le 28/09/2013, à 21:39
- Zeilloc
NVIDIA gtx550ti Erreur boot : Starting Load Fallback Graphics devices
Bonsoir,
Tout marchait bien avec ma carte graphique NVIDIA GTX 550TI.
J'ai nettoyé aujourd'hui celle-ci, pour la dépoussiérer.
Je l'ai remontée dans son port PCI-E.
Depuis, impossible de booter sous Ubuntu quand la carte graphique est connectée (alors que j'y parviens sous Windows 7).
J'obtiens soit :
- un écran noir avec un tiret blanc clignotant en haut à gauche
- le message suivant : Starting Load Fallback Graphics devices [FAIL]
Si cela peut aider, en mode recovery, j'ai obtenu le message suivant :
Hasard ou coïncidence ? J'ai du mal à croire que la carte graphique soit HS.
Juste qu'Ubuntu ne parvient plus à démarrer avec celle-ci.
(j'écris ce message carte NVIDIA déconnectée et en utilisant le port VGA de la carte mère)
Dernière modification par Zeilloc (Le 19/10/2013, à 00:07)
Le Blog-note, véritable condensé d'informations étonnantes, d'astuces pratiques, de matière à penser, d'idées sympathiques ou de savoirs universels.
Hors ligne
#2 Le 19/10/2013, à 00:09
- Zeilloc
Re : NVIDIA gtx550ti Erreur boot : Starting Load Fallback Graphics devices
Je donne les contenus des fichiers suivants, si cela peut aider :
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 310.14 (buildd@komainu) Tue Oct 16 22:20:47 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
Option "Coolbits" "4"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection$ cat /var/log/Xorg.0.log
[ 10.732]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.732] X Protocol Version 11, Revision 0
[ 10.732] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[ 10.732] Current Operating System: Linux zeilloc-desktop 3.5.0-41-generic #64~precise1-Ubuntu SMP Thu Sep 12 16:50:04 UTC 2013 x86_64
[ 10.732] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-41-generic root=UUID=951b2e9b-47d3-48df-a1ed-b0cf1dcb40c3 ro quiet splash vt.handoff=7
[ 10.732] Build Date: 11 April 2013 11:49:23PM
[ 10.732] xorg-server 2:1.13.0-0ubuntu6.1~precise3 (For technical support please see http://www.ubuntu.com/support)
[ 10.732] Current version of pixman: 0.24.4
[ 10.732] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.733] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.733] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 18 21:59:13 2013
[ 10.733] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.733] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.733] (==) ServerLayout "Layout0"
[ 10.733] (**) |-->Screen "Screen0" (0)
[ 10.733] (**) | |-->Monitor "Monitor0"
[ 10.733] (**) | |-->Device "Device0"
[ 10.733] (**) |-->Input Device "Keyboard0"
[ 10.733] (**) |-->Input Device "Mouse0"
[ 10.733] (**) Option "Xinerama" "0"
[ 10.733] (==) Automatically adding devices
[ 10.733] (==) Automatically enabling devices
[ 10.733] (==) Automatically adding GPU devices
[ 10.733] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 10.733] Entry deleted from font path.
[ 10.733] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 10.733] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 10.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.733] (WW) Disabling Keyboard0
[ 10.733] (WW) Disabling Mouse0
[ 10.733] (II) Loader magic: 0x7f258fbd8c20
[ 10.733] (II) Module ABI versions:
[ 10.733] X.Org ANSI C Emulation: 0.4
[ 10.733] X.Org Video Driver: 13.0
[ 10.733] X.Org XInput driver : 18.0
[ 10.733] X.Org Server Extension : 7.0
[ 10.734] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.734] (--) PCI:*(0:0:2:0) 8086:0152:1849:0152 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 10.734] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.734] Initializing built-in extension Generic Event Extension
[ 10.734] Initializing built-in extension SHAPE
[ 10.734] Initializing built-in extension MIT-SHM
[ 10.735] Initializing built-in extension XInputExtension
[ 10.735] Initializing built-in extension XTEST
[ 10.735] Initializing built-in extension BIG-REQUESTS
[ 10.735] Initializing built-in extension SYNC
[ 10.735] Initializing built-in extension XKEYBOARD
[ 10.735] Initializing built-in extension XC-MISC
[ 10.735] Initializing built-in extension SECURITY
[ 10.735] Initializing built-in extension XINERAMA
[ 10.735] Initializing built-in extension XFIXES
[ 10.735] Initializing built-in extension RENDER
[ 10.735] Initializing built-in extension RANDR
[ 10.735] Initializing built-in extension COMPOSITE
[ 10.735] Initializing built-in extension DAMAGE
[ 10.735] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.735] Initializing built-in extension DOUBLE-BUFFER
[ 10.735] Initializing built-in extension RECORD
[ 10.735] Initializing built-in extension DPMS
[ 10.735] Initializing built-in extension X-Resource
[ 10.735] Initializing built-in extension XVideo
[ 10.735] Initializing built-in extension XVideo-MotionCompensation
[ 10.735] Initializing built-in extension XFree86-VidModeExtension
[ 10.735] Initializing built-in extension XFree86-DGA
[ 10.735] Initializing built-in extension XFree86-DRI
[ 10.735] Initializing built-in extension DRI2
[ 10.735] (II) LoadModule: "glx"
[ 10.769] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.780] (II) Module glx: vendor="X.Org Foundation"
[ 10.780] compiled for 1.13.0, module version = 1.0.0
[ 10.780] ABI class: X.Org Server Extension, version 7.0
[ 10.780] (==) AIGLX enabled
[ 10.780] Loading extension GLX
[ 10.780] (II) LoadModule: "nvidia"
[ 10.780] (WW) Warning, couldn't open module nvidia
[ 10.780] (II) UnloadModule: "nvidia"
[ 10.780] (II) Unloading nvidia
[ 10.780] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 10.780] (==) Matched intel as autoconfigured driver 0
[ 10.780] (==) Matched intel as autoconfigured driver 1
[ 10.780] (==) Matched vesa as autoconfigured driver 2
[ 10.780] (==) Matched modesetting as autoconfigured driver 3
[ 10.780] (==) Matched fbdev as autoconfigured driver 4
[ 10.780] (==) Assigned the driver to the xf86ConfigLayout
[ 10.780] (II) LoadModule: "intel"
[ 10.780] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 10.811] (II) Module intel: vendor="X.Org Foundation"
[ 10.811] compiled for 1.13.0, module version = 2.20.9
[ 10.811] Module class: X.Org Video Driver
[ 10.811] ABI class: X.Org Video Driver, version 13.0
[ 10.811] (II) LoadModule: "vesa"
[ 10.811] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 10.811] (II) Module vesa: vendor="X.Org Foundation"
[ 10.811] compiled for 1.13.0, module version = 2.3.2
[ 10.811] Module class: X.Org Video Driver
[ 10.811] ABI class: X.Org Video Driver, version 13.0
[ 10.811] (II) LoadModule: "modesetting"
[ 10.811] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 10.811] (II) Module modesetting: vendor="X.Org Foundation"
[ 10.811] compiled for 1.13.0, module version = 0.5.0
[ 10.811] Module class: X.Org Video Driver
[ 10.811] ABI class: X.Org Video Driver, version 13.0
[ 10.811] (II) LoadModule: "fbdev"
[ 10.811] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 10.811] (II) Module fbdev: vendor="X.Org Foundation"
[ 10.811] compiled for 1.13.0, module version = 0.4.3
[ 10.811] Module class: X.Org Video Driver
[ 10.811] ABI class: X.Org Video Driver, version 13.0
[ 10.811] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 10.811] (II) VESA: driver for VESA chipsets: vesa
[ 10.811] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.811] (II) FBDEV: driver for framebuffer: fbdev
[ 10.811] (++) using VT number 7
[ 10.812] (II) intel(0): using device path '/dev/dri/card0'
[ 10.812] (WW) Falling back to old probe method for vesa
[ 10.812] (WW) Falling back to old probe method for modesetting
[ 10.812] (WW) Falling back to old probe method for fbdev
[ 10.812] (II) Loading sub module "fbdevhw"
[ 10.812] (II) LoadModule: "fbdevhw"
[ 10.812] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 10.812] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 10.812] compiled for 1.13.0, module version = 0.0.2
[ 10.812] ABI class: X.Org Video Driver, version 13.0
[ 10.812] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 10.812] (==) intel(0): RGB weight 888
[ 10.812] (==) intel(0): Default visual is TrueColor
[ 10.812] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1)
[ 10.812] (**) intel(0): Relaxed fencing enabled
[ 10.812] (**) intel(0): Wait on SwapBuffers? enabled
[ 10.812] (**) intel(0): Triple buffering? enabled
[ 10.812] (**) intel(0): Framebuffer tiled
[ 10.812] (**) intel(0): Pixmaps tiled
[ 10.812] (**) intel(0): 3D buffers tiled
[ 10.812] (**) intel(0): SwapBuffers wait enabled
[ 10.812] (==) intel(0): video overlay key set to 0x101fe
[ 10.820] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 10.821] (II) intel(0): Output HDMI1 has no monitor section
[ 10.868] (II) intel(0): Output DP1 has no monitor section
[ 10.900] (II) intel(0): Output HDMI2 has no monitor section
[ 10.916] (II) intel(0): Output HDMI3 has no monitor section
[ 10.964] (II) intel(0): Output DP2 has no monitor section
[ 11.012] (II) intel(0): Output DP3 has no monitor section
[ 11.020] (II) intel(0): EDID for output VGA1
[ 11.020] (II) intel(0): Printing probed modes for output VGA1
[ 11.020] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.020] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.020] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11.020] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 11.020] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 11.021] (II) intel(0): EDID for output HDMI1
[ 11.068] (II) intel(0): EDID for output DP1
[ 11.100] (II) intel(0): EDID for output HDMI2
[ 11.116] (II) intel(0): EDID for output HDMI3
[ 11.164] (II) intel(0): EDID for output DP2
[ 11.212] (II) intel(0): EDID for output DP3
[ 11.212] (II) intel(0): Output VGA1 connected
[ 11.212] (II) intel(0): Output HDMI1 disconnected
[ 11.212] (II) intel(0): Output DP1 disconnected
[ 11.212] (II) intel(0): Output HDMI2 disconnected
[ 11.212] (II) intel(0): Output HDMI3 disconnected
[ 11.212] (II) intel(0): Output DP2 disconnected
[ 11.212] (II) intel(0): Output DP3 disconnected
[ 11.212] (II) intel(0): Using exact sizes for initial modes
[ 11.212] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 11.212] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11.212] (II) intel(0): Kernel page flipping support detected, enabling
[ 11.212] (==) intel(0): DPI set to (96, 96)
[ 11.212] (II) Loading sub module "fb"
[ 11.212] (II) LoadModule: "fb"
[ 11.212] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.212] (II) Module fb: vendor="X.Org Foundation"
[ 11.212] compiled for 1.13.0, module version = 1.0.0
[ 11.212] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.212] (II) Loading sub module "dri2"
[ 11.212] (II) LoadModule: "dri2"
[ 11.212] (II) Module "dri2" already built-in
[ 11.212] (II) UnloadModule: "vesa"
[ 11.212] (II) Unloading vesa
[ 11.212] (II) UnloadModule: "modesetting"
[ 11.212] (II) Unloading modesetting
[ 11.212] (II) UnloadModule: "fbdev"
[ 11.212] (II) Unloading fbdev
[ 11.212] (II) UnloadSubModule: "fbdevhw"
[ 11.212] (II) Unloading fbdevhw
[ 11.212] (==) Depth 24 pixmap format is 32 bpp
[ 11.212] (II) intel(0): [DRI2] Setup complete
[ 11.212] (II) intel(0): [DRI2] DRI driver: i965
[ 11.212] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 11.271] (II) UXA(0): Driver registered support for the following operations:
[ 11.271] (II) solid
[ 11.271] (II) copy
[ 11.271] (II) composite (RENDER acceleration)
[ 11.271] (II) put_image
[ 11.271] (II) get_image
[ 11.271] (==) intel(0): Backing store disabled
[ 11.271] (==) intel(0): Silken mouse enabled
[ 11.271] (II) intel(0): Initializing HW Cursor
[ 11.271] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.272] (**) intel(0): DPMS enabled
[ 11.272] (==) intel(0): Intel XvMC decoder enabled
[ 11.272] (II) intel(0): Set up textured video
[ 11.272] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 11.272] (II) intel(0): direct rendering: DRI2 Enabled
[ 11.272] (WW) intel(0): Option "Coolbits" is not used
[ 11.272] (WW) intel(0): Option "Stereo" is not used
[ 11.272] (WW) intel(0): Option "nvidiaXineramaInfoOrder" is not used
[ 11.272] (WW) intel(0): Option "metamodes" is not used
[ 11.272] (==) intel(0): hotplug detection: "enabled"
[ 11.288] (--) RandR disabled
[ 11.402] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 11.402] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 11.402] (II) AIGLX: enabled GLX_ARB_create_context
[ 11.402] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 11.402] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 11.402] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 11.402] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 11.402] (II) AIGLX: Loaded and initialized i965
[ 11.402] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.402] (II) intel(0): Setting screen physical size to 270 x 203
[ 11.452] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 11.461] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.461] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.461] (II) LoadModule: "evdev"
[ 11.461] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.474] (II) Module evdev: vendor="X.Org Foundation"
[ 11.474] compiled for 1.13.0, module version = 2.7.3
[ 11.474] Module class: X.Org XInput Driver
[ 11.474] ABI class: X.Org XInput driver, version 18.0
[ 11.474] (II) Using input driver 'evdev' for 'Power Button'
[ 11.474] (**) Power Button: always reports core events
[ 11.474] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 11.474] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.474] (--) evdev: Power Button: Found keys
[ 11.474] (II) evdev: Power Button: Configuring as keyboard
[ 11.474] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 11.474] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.474] (**) Option "xkb_rules" "evdev"
[ 11.474] (**) Option "xkb_model" "pc105"
[ 11.474] (**) Option "xkb_layout" "fr"
[ 11.474] (**) Option "xkb_variant" "latin9"
[ 11.475] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 11.486] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 11.486] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11.486] (II) Using input driver 'evdev' for 'Video Bus'
[ 11.486] (**) Video Bus: always reports core events
[ 11.486] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 11.486] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11.486] (--) evdev: Video Bus: Found keys
[ 11.486] (II) evdev: Video Bus: Configuring as keyboard
[ 11.486] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event15"
[ 11.486] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.486] (**) Option "xkb_rules" "evdev"
[ 11.486] (**) Option "xkb_model" "pc105"
[ 11.486] (**) Option "xkb_layout" "fr"
[ 11.486] (**) Option "xkb_variant" "latin9"
[ 11.486] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.486] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.486] (II) Using input driver 'evdev' for 'Power Button'
[ 11.486] (**) Power Button: always reports core events
[ 11.486] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 11.486] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.486] (--) evdev: Power Button: Found keys
[ 11.486] (II) evdev: Power Button: Configuring as keyboard
[ 11.486] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 11.486] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 11.486] (**) Option "xkb_rules" "evdev"
[ 11.486] (**) Option "xkb_model" "pc105"
[ 11.486] (**) Option "xkb_layout" "fr"
[ 11.486] (**) Option "xkb_variant" "latin9"
[ 11.486] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11.487] (II) config/udev: Adding input device SAITEK CYBORG 3D USB (/dev/input/event2)
[ 11.487] (II) No input driver specified, ignoring this device.
[ 11.487] (II) This device may have been added with another device file.
[ 11.487] (II) config/udev: Adding input device SAITEK CYBORG 3D USB (/dev/input/js0)
[ 11.487] (II) No input driver specified, ignoring this device.
[ 11.487] (II) This device may have been added with another device file.
[ 11.487] (II) config/udev: Adding input device MLK PLEOMAX wireless device (/dev/input/event3)
[ 11.487] (**) MLK PLEOMAX wireless device: Applying InputClass "evdev keyboard catchall"
[ 11.487] (II) Using input driver 'evdev' for 'MLK PLEOMAX wireless device'
[ 11.487] (**) MLK PLEOMAX wireless device: always reports core events
[ 11.487] (**) evdev: MLK PLEOMAX wireless device: Device: "/dev/input/event3"
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Vendor 0x4fc Product 0x5d8
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found keys
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: Configuring as keyboard
[ 11.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3/event3"
[ 11.487] (II) XINPUT: Adding extended input device "MLK PLEOMAX wireless device" (type: KEYBOARD, id 9)
[ 11.487] (**) Option "xkb_rules" "evdev"
[ 11.487] (**) Option "xkb_model" "pc105"
[ 11.487] (**) Option "xkb_layout" "fr"
[ 11.487] (**) Option "xkb_variant" "latin9"
[ 11.487] (II) config/udev: Adding input device MLK PLEOMAX wireless device (/dev/input/event4)
[ 11.487] (**) MLK PLEOMAX wireless device: Applying InputClass "evdev pointer catchall"
[ 11.487] (**) MLK PLEOMAX wireless device: Applying InputClass "evdev keyboard catchall"
[ 11.487] (II) Using input driver 'evdev' for 'MLK PLEOMAX wireless device'
[ 11.487] (**) MLK PLEOMAX wireless device: always reports core events
[ 11.487] (**) evdev: MLK PLEOMAX wireless device: Device: "/dev/input/event4"
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Vendor 0x4fc Product 0x5d8
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found 9 mouse buttons
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found scroll wheel(s)
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found relative axes
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found x and y relative axes
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found absolute axes
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: Forcing absolute x/y axes to exist.
[ 11.487] (--) evdev: MLK PLEOMAX wireless device: Found keys
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: Configuring as mouse
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: Configuring as keyboard
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: Adding scrollwheel support
[ 11.487] (**) evdev: MLK PLEOMAX wireless device: YAxisMapping: buttons 4 and 5
[ 11.487] (**) evdev: MLK PLEOMAX wireless device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input4/event4"
[ 11.487] (II) XINPUT: Adding extended input device "MLK PLEOMAX wireless device" (type: KEYBOARD, id 10)
[ 11.487] (**) Option "xkb_rules" "evdev"
[ 11.487] (**) Option "xkb_model" "pc105"
[ 11.487] (**) Option "xkb_layout" "fr"
[ 11.487] (**) Option "xkb_variant" "latin9"
[ 11.487] (II) evdev: MLK PLEOMAX wireless device: initialized for relative axes.
[ 11.487] (WW) evdev: MLK PLEOMAX wireless device: ignoring absolute axes.
[ 11.487] (**) MLK PLEOMAX wireless device: (accel) keeping acceleration scheme 1
[ 11.488] (**) MLK PLEOMAX wireless device: (accel) acceleration profile 0
[ 11.488] (**) MLK PLEOMAX wireless device: (accel) acceleration factor: 2.000
[ 11.488] (**) MLK PLEOMAX wireless device: (accel) acceleration threshold: 4
[ 11.488] (II) config/udev: Adding input device MLK PLEOMAX wireless device (/dev/input/mouse0)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event14)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event6)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.488] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 11.488] (II) No input driver specified, ignoring this device.
[ 11.488] (II) This device may have been added with another device file.
[ 11.489] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 11.489] (II) No input driver specified, ignoring this device.
[ 11.489] (II) This device may have been added with another device file.
[ 11.489] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 11.489] (II) No input driver specified, ignoring this device.
[ 11.489] (II) This device may have been added with another device file.
[ 11.489] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/event5)
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: Applying InputClass "evdev pointer catchall"
[ 11.489] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101a'
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: always reports core events
[ 11.489] (**) evdev: Logitech Unifying Device. Wireless PID:101a: Device: "/dev/input/event5"
[ 11.489] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Vendor 0x46d Product 0xc52b
[ 11.489] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found 20 mouse buttons
[ 11.489] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found scroll wheel(s)
[ 11.489] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found relative axes
[ 11.489] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found x and y relative axes
[ 11.489] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Configuring as mouse
[ 11.489] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Adding scrollwheel support
[ 11.489] (**) evdev: Logitech Unifying Device. Wireless PID:101a: YAxisMapping: buttons 4 and 5
[ 11.489] (**) evdev: Logitech Unifying Device. Wireless PID:101a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0006/input/input5/event5"
[ 11.489] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101a" (type: MOUSE, id 11)
[ 11.489] (II) evdev: Logitech Unifying Device. Wireless PID:101a: initialized for relative axes.
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: (accel) keeping acceleration scheme 1
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration profile 0
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration factor: 2.000
[ 11.489] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration threshold: 4
[ 11.489] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/mouse1)
[ 11.489] (II) No input driver specified, ignoring this device.
[ 11.489] (II) This device may have been added with another device file.
[ 65.226] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkmLe Blog-note, véritable condensé d'informations étonnantes, d'astuces pratiques, de matière à penser, d'idées sympathiques ou de savoirs universels.
Hors ligne