Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 06/10/2013, à 13:09

GuISm0

[Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Salut tout le monde,
Voilà j'ai un problème avec le boot eOS(ubnutu) / windows 7.

Je viens d'installer eOS sur une partition d'un SSD avec windows 7 sur l'autre partition. Je précise que je l'ai installé avec le choix "Autres choses" car avec le premier choix, il ne reconnait pas le SSD mais uniquement mon second disque dur.
choix d'installation
Choix d'installation.
Install : success,
Reboot...
Et je redémarre sur Windows. pas du menu boot !! en cherchant sur le net, j'vois qu'on peut avoir des problèmes de boot UEFI ( j'ai une CM : ASUS P8P67 PRO REV 3.1). Je teste avec boot-repair mais rien à faire, "action cancelled".
Quelqu'un aurait-il une idée ??
Merci à vous

Quand j'essaie de connaitre le type de boot, j'essaie ces commandes :

C:\Windows\system32>bcdedit
'bcdedit' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.

mais cela ne donne rien donc :s
Bref, avez-vous des idées ?

PS : J'utilise un Windows Arium 64 bits.
PS2 : Y'a déjà un topic sur ce sujet mais étant résolu, j'ai préféré en créé un nouveau

Dernière modification par GuISm0 (Le 07/10/2013, à 12:58)

Hors ligne

#2 Le 06/10/2013, à 13:50

malbo

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Peux-tu répondre à cette demande : http://doc.ubuntu-fr.org/tutoriel/boot-info

Hors ligne

#3 Le 06/10/2013, à 23:09

GuISm0

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Je n'ai pas encore pu le refaire, parce que le paquet est indisponible sad. Du coup, je l'ai réinstallé et là, magie de l'informatique, je boot maintenant sur eOS et je n'ai toujours pas le bootloader windows / eOS, et comme le paquet boot-repair n'est toujours pas dispo, je ne peux pas voir si cela peut rectifier le tir du bootloader.

Hors ligne

#4 Le 06/10/2013, à 23:43

GuISm0

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Encore une fois la magie de l'informatique a opéré. Après plusieurs reboot, maj (système+drivers CG) le bootloader est apparu avec eOS en 1er. Donc pour ce point, c'est plutôt cool big_smile Maintenant, connaissez-vous un moyen de définir les choix ? avec boot-repair, c'est sensé fonctionnait ?

PS : Voici les résultats : http://paste.ubuntu.com/6202656/

Hors ligne

#5 Le 07/10/2013, à 06:48

malbo

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 27Sep2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos2)/boot/grub on this drive.
 => Windows 2000/XP/2003 is installed in the MBR of /dev/sdb.
 => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  elementary OS Luna 
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.03 2010-10-22 ........>..sr>........%.9...0...~.....~...f...M.f.f....f..0~....>E}.u......
    Boot sector info:  Syslinux looks at sector 1505930 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 64.0 GB, 64023257088 bytes
255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   104,564,735   104,562,688   7 NTFS / exFAT / HPFS
/dev/sda2         104,564,736   125,044,735    20,480,000  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             63 1,953,520,064 1,953,520,002   7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 8470 MB, 8470396928 bytes
255 heads, 63 sectors/track, 1029 cylinders, total 16543744 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *              2    16,543,743    16,543,742   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        D6A4B385A4B366A1                       ntfs       
/dev/sda2        37e9a483-0475-4b97-80c0-22a290bd154c   ext4       
/dev/sdb1        08F48C39F48C2AD0                       ntfs       Data
/dev/sdc1        3907-1AE7                              vfat       SANS TITRE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /media/D6A4B385A4B366A1  fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)
/dev/sdb1        /media/Data              fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos2)'
  search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
  set locale_dir=($root)/boot/grub/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'elementary OS, avec Linux 3.2.0-54-generic' --class elementary --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
	linux	/boot/vmlinuz-3.2.0-54-generic root=UUID=37e9a483-0475-4b97-80c0-22a290bd154c ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-54-generic
}
menuentry 'elementary OS, avec Linux 3.2.0-54-generic (mode de dépannage)' --class elementary --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
	echo	'Chargement de Linux 3.2.0-54-generic…'
	linux	/boot/vmlinuz-3.2.0-54-generic root=UUID=37e9a483-0475-4b97-80c0-22a290bd154c ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial…'
	initrd	/boot/initrd.img-3.2.0-54-generic
}
submenu "Previous Linux versions" {
menuentry 'elementary OS, avec Linux 3.2.0-51-generic' --class elementary --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
	linux	/boot/vmlinuz-3.2.0-51-generic root=UUID=37e9a483-0475-4b97-80c0-22a290bd154c ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-51-generic
}
menuentry 'elementary OS, avec Linux 3.2.0-51-generic (mode de dépannage)' --class elementary --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root 37e9a483-0475-4b97-80c0-22a290bd154c
	echo	'Chargement de Linux 3.2.0-51-generic…'
	linux	/boot/vmlinuz-3.2.0-51-generic root=UUID=37e9a483-0475-4b97-80c0-22a290bd154c ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial…'
	initrd	/boot/initrd.img-3.2.0-51-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root D6A4B385A4B366A1
	chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda2 during installation
UUID=37e9a483-0475-4b97-80c0-22a290bd154c /               ext4    errors=remount-ro 0       1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  52.453918457 = 56.321966080   boot/grub/grub.cfg                             1
  58.273715973 = 62.570926080   boot/grub/core.img                             1
  50.052490234 = 53.743452160   boot/vmlinuz-3.2.0-51-generic                  1
  51.810302734 = 55.630888960   boot/vmlinuz-3.2.0-54-generic                  1
  51.810302734 = 55.630888960   vmlinuz                                        1
  50.052490234 = 53.743452160   vmlinuz.old                                    1
  51.180664062 = 54.954819584   boot/initrd.img-3.2.0-51-generic               3
  52.615196228 = 56.495136768   boot/initrd.img-3.2.0-54-generic               2
  52.615196228 = 56.495136768   initrd.img                                     2
  51.180664062 = 54.954819584   initrd.img.old                                 3

=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try elementary OS without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install elementary OS" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdc1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Try elementary OS without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper  quiet splash --

label ubnentry2
menu label ^Install elementary OS
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper only-ubiquity  quiet splash --

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry6
menu label Try elementary OS without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry7
menu label Install elementary OS
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --

label ubnentry8
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --

--------------------------------------------------------------------------------

=================== sdc1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdc1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             menu.c32                                       1

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

========= Devices which don't seem to have a corresponding hard drive: =========

sdd 


ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-10-07__00h09 ===================
boot-repair version : 3.199~ppa29~precise
boot-sav version : 3.199~ppa29~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.199~ppa29~precise
boot-repair is executed in installed-session (elementary OS Luna, luna, elementary OS, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.2.0-51-generic root=UUID=37e9a483-0475-4b97-80c0-22a290bd154c ro quiet splash vt.handoff=7
Unmount sdc1 from /media/SANS TITRE to avoid space incompatibilities

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - elementary OS Luna CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain

=================== blkid:
/dev/sda1: UUID="D6A4B385A4B366A1" TYPE="ntfs"
/dev/sda2: UUID="37e9a483-0475-4b97-80c0-22a290bd154c" TYPE="ext4"
/dev/sdb1: LABEL="Data" UUID="08F48C39F48C2AD0" TYPE="ntfs"
/dev/sdc1: LABEL="SANS TITRE" UUID="3907-1AE7" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 août  10 20:10 grub.d
total 56
-rwxr-xr-x 1 root root 6743 juil. 20 01:29 00_header
-rwxr-xr-x 1 root root 5522 juil. 20 01:15 05_debian_theme
-rwxr-xr-x 1 root root 7780 juil. 20 01:29 10_linux
-rwxr-xr-x 1 root root 6335 juil. 20 01:29 20_linux_xen
-rwxr-xr-x 1 root root 7603 juil. 20 01:29 30_os-prober
-rwxr-xr-x 1 root root 1388 juil. 20 01:29 30_uefi-firmware
-rwxr-xr-x 1 root root  214 juil. 20 01:29 40_custom
-rwxr-xr-x 1 root root   95 juil. 20 01:29 41_custom
-rw-r--r-- 1 root root  483 juil. 20 01:29 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== No kernel in /mnt/boot-sav/sdc1/boot:
grub


=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/D6A4B385A4B366A1.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/media/Data.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdc1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	63 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	2 sectors * 512 bytes


=================== parted -l:

Model: ATA M4-CT064M4SSD2 (scsi)
Disk /dev/sda: 64.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  53.5GB  53.5GB  primary  ntfs         boot
2      53.5GB  64.0GB  10.5GB  primary  ext4


Model: ATA SAMSUNG HD103UJ (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  1000GB  1000GB  primary  ntfs         boot


Model: Generic Flash Disk (scsi)
Disk /dev/sdc: 8470MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start  End     Size    Type     File system  Flags
1      1024B  8470MB  8470MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:64.0GB:scsi:512:512:msdos:ATA M4-CT064M4SSD2;
1:1049kB:53.5GB:53.5GB:ntfs::boot;
2:53.5GB:64.0GB:10.5GB:ext4::;

BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:ATA SAMSUNG HD103UJ;
1:32.3kB:1000GB:1000GB:ntfs::boot;

BYT;
/dev/sdc:8470MB:scsi:512:512:msdos:Generic Flash Disk;
1:1024B:8470MB:8470MB:fat32::boot;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/guism0/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=guism0)
/dev/sda1 on /media/D6A4B385A4B366A1 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdb1 on /media/Data type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdc1 on /mnt/boot-sav/sdc1 type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdc sdc1 sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 usbmon5 usbmon6 vga_arbiter zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 3b 06 00 00 00 00  |..........;.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  a1 66 b3 a4 85 b3 a4 d6  |.........f......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  81 59 70 74 00 00 00 00  |.........Ypt....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  d0 2a 8c f4 39 8c f4 08  |.........*..9...|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200
ls: impossible d'accéder à /boot/efi/efi: Aucun fichier ou dossier de ce type
ls /boot/efi/efi :

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 08 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  20 00 ff 00 02 00 00 00  |........ .......|
00000020  fe 6f fc 00 fd 3e 00 00  00 00 00 00 02 00 00 00  |.o...>..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 00 29 e7 1a 07 39 53  41 4e 53 20 54 49 54 52  |..)...9SANS TITR|
00000050  45 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |E FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d bc 50 50 50 50 cd  13 eb 5c 8b 55 aa 8b 75  |.M.PPPP....U..u|
000000a0  a8 c1 ee 04 01 f2 81 fa  b7 07 73 2b f6 45 b4 7f  |..........s+.E..|
000000b0  75 25 38 4d b8 74 20 66  3d 21 47 50 54 75 10 80  |u%8M.t f=!GPTu..|
000000c0  7d b8 ed 75 0a 66 ff 75  ec 66 ff 75 e8 eb 0f 51  |}..u.f.u.f.u...Q|
000000d0  51 66 ff 75 bc eb 07 51  51 66 ff 36 1c 7c b4 08  |Qf.u...QQf.6.|..|
000000e0  cd 13 72 13 20 e4 75 0f  c1 ea 08 42 89 16 1a 7c  |..r. .u....B...||
000000f0  83 e1 3f 89 0e 18 7c fb  bb aa 55 b4 41 8a 16 74  |..?...|...U.A..t|
00000100  7b cd 13 72 10 81 fb 55  aa 75 0a f6 c1 01 74 05  |{..r...U.u....t.|
00000110  c6 06 45 7d 00 66 b8 8a  fa 16 00 66 ba 00 00 00  |..E}.f.....f....|
00000120  00 bb 00 7e e8 10 00 66  81 3e 24 7e d4 ff 73 72  |...~...f.>$~..sr|
00000130  75 76 ea 38 7e 00 00 66  03 06 60 7b 66 13 16 64  |uv.8~..f..`{f..d|
00000140  7b b9 10 00 eb 2b 66 52  66 50 06 53 6a 01 6a 10  |{....+fRfP.Sj.j.|
00000150  89 e6 66 60 b4 42 e8 7f  00 66 61 8d 64 10 72 01  |..f`.B...fa.d.r.|
00000160  c3 66 60 31 c0 e8 70 00  66 61 e2 da c6 06 45 7d  |.f`1..p.fa....E}|
00000170  2b 66 60 66 0f b7 36 18  7c 66 0f b7 3e 1a 7c 66  |+f`f..6.|f..>.|f|
00000180  f7 f6 31 c9 87 ca 66 f7  f7 66 3d ff 03 00 00 77  |..1...f..f=....w|
00000190  17 c0 e4 06 41 08 e1 88  c5 88 d6 b8 01 02 e8 37  |....A..........7|
000001a0  00 66 61 72 01 c3 e2 c9  31 f6 8e d6 bc 68 7b 8e  |.far....1....h{.|
000001b0  de 66 8f 06 78 00 be df  7d e8 09 00 31 c0 cd 16  |.f..x...}...1...|
000001c0  cd 19 f4 eb fd 66 60 ac  20 c0 74 09 b4 0e bb 07  |.....f`. .t.....|
000001d0  00 cd 10 eb f2 66 61 c3  8a 16 74 7b cd 13 c3 42  |.....fa...t{...B|
000001e0  6f 6f 74 20 65 72 72 6f  72 0d 0a 00 00 00 00 00  |oot error.......|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      9.7G  3.0G  6.2G  33% /
udev           devtmpfs  3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs     1.6G  924K  1.6G   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     3.9G  360K  3.9G   1% /run/shm
/dev/sda1      fuseblk    50G   33G   17G  66% /media/D6A4B385A4B366A1
/dev/sdb1      fuseblk   932G  120G  812G  13% /media/Data
/dev/sdc1      vfat      7.9G  720M  7.2G   9% /mnt/boot-sav/sdc1

=================== fdisk -l:

Disk /dev/sda: 64.0 GB, 64023257088 bytes
255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7906e7bc

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   104564735    52281344    7  HPFS/NTFS/exFAT
/dev/sda2       104564736   125044735    10240000   83  Linux

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x562a70e7

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63  1953520064   976760001    7  HPFS/NTFS/exFAT

Disk /dev/sdc: 8470 MB, 8470396928 bytes
255 heads, 63 sectors/track, 1029 cylinders, total 16543744 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           2    16543743     8271871    b  W95 FAT32


=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (64.0GB) !

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda2 into the MBRs of all disks (except USB without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.
paste2.org ko (http://paste2.org/new-paste), using paste.ubuntu

Tout me parait correct.
Je ne comprends pas trop ta question : "Maintenant, connaissez-vous un moyen de définir les choix ?". Peux-tu reformuler et détailler ce que tu cherches à obtenir ?

Hors ligne

#6 Le 07/10/2013, à 10:55

GuISm0

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Désolé pour la clarté de ma question. Effet, je cherche à définir le choix par défaut du bootloader, par exemple, qu'au bout de 10sec, le pc boot sur window plutot qu'eOS ou l'inverse ? Espérant avoir été plus clair

Hors ligne

#7 Le 07/10/2013, à 11:22

malbo

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Voici ce que tu dois voir comme menu Grub :

elementary OS, avec Linux 3.2.0-54-generic
elementary OS, avec Linux 3.2.0-54-generic (mode de dépannage)
Previous Linux versions
Windows 7 (loader) (on /dev/sda1)

Pour démarrer par défaut sur Windows 7, il convient que tu modifies la variable GRUB_DEFAULT pour qu'elle devienne GRUB_DEFAULT=3 (au lieu de GRUB_DEFAULT=0 actuellement) afin que le démarrage se fasse sur la quatrième ligne du menu Grub au lieu de se faire sur la première ligne du menu Grub. La procédure très simple pour modifier cette valeur GRUB_DEFAULT est expliquée dans ce post que tu adapteras à ton cas (toi, c'est GRUB_DEFAULT=3 qu'il te faut) : http://forum.ubuntu-fr.org/viewtopic.ph … #p10947891
Tu devrais en profiter pour retoucher également la variable GRUB_TIMEOUT=10 suivant mes indications dans ce même lien. En effet, 10 secondes c'est généralement beaucoup trop et ça vaut le coup de diminuer cela.

Dernière modification par malbo (Le 07/10/2013, à 11:28)

Hors ligne

#8 Le 07/10/2013, à 12:58

GuISm0

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

Nickel, merci chef wink

Hors ligne

#9 Le 11/10/2013, à 12:18

GuISm0

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

ce qui est bizarre, c'est que faire l'inverse ne marche pas, j'ai échangé à nouveau en "0" et rien ne s'est produit (j'ai vérifié si cela avait bien été pris en compte une fois redémarré, GRUB_DEFAULT=0 ) bizarre?

Hors ligne

#10 Le 11/10/2013, à 13:14

malbo

Re : [Résolu] Dual boot Ubuntu / Windows 7, UEFI ou non ?

GuISm0 a écrit :

j'ai échangé à nouveau en "0" et rien ne s'est produit

Tu as oublié* qu'il fallait passer la commande suivante dans un terminal :

sudo update-grub

sinon la modif n'est pas prise en compte dans le fichier grub.cfg qui est le fichier de configuration de grub.
Donc à chaque fois que tu fais une modif qui touche à un paramétrage de Grub, il faut penser à cette commande.

* c'était mentionné et rementionné dans le lien que je t'avais indiqué : http://forum.ubuntu-fr.org/viewtopic.ph … #p10947891

Dernière modification par malbo (Le 11/10/2013, à 13:15)

Hors ligne