Pages : 1
#1 Le 24/10/2013, à 12:49
- guy-pierre
[RESOLU] Cube...
Bonjour,
depuis mon passage de la 13.04 à la 13.10, le fameux "cube" ne fonctionne plus chez moi (kubuntu, KDE 4.11.2). Dans configuration du système, effets de bureaux, options avancées, le système se met constamment sous XRender au lieu de OpenGL, de sorte que plusieurs effets ne fonctionnent plus, dont le cube. Et comme j'utilise 4 bureaux, c'est plutôt gênant...
Une idée ?
Dernière modification par guy-pierre (Le 05/11/2013, à 09:24)
Hors ligne
#2 Le 24/10/2013, à 14:39
- xabilon
Re : [RESOLU] Cube...
Salut
Si ça repasse en Xrender, c'est qu'aucune accélération graphique n'est détéctée. Peut-être la mise à niveau a-t-elle changé le pilote graphique ?
Quelle est ta carte graphique, et quel est le pilote utilisé ?
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#3 Le 24/10/2013, à 14:45
- guy-pierre
Re : [RESOLU] Cube...
salut
j'ai une NVIDIA GEFORCE GT 650M
Il n'y a pas de pilote propriétaire installé...
Hors ligne
#4 Le 24/10/2013, à 14:51
- guy-pierre
Re : [RESOLU] Cube...
si je vais dans système, pilotes supplémentaires, j'ai un pilote 319_nividia_update qui est activé mais pas utilisé et un pilote Nividia binary Xorg driver kernel module and VDPAU library qui lui n'est pas activé.
Hors ligne
#5 Le 24/10/2013, à 14:57
- xabilon
Re : [RESOLU] Cube...
319 ? Moi je n'en suis qu'à 304 
mais c'est normal, moi j'ai nvidia-current et toi nvidia-updates
Tu peux donner le contenu du fichier /var/log/Xorg.0.log ?
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#6 Le 24/10/2013, à 15:00
- Ubuntu1988
Re : [RESOLU] Cube...
Quelle est ta carte graphique aussi ? Car depuis le passage aux pilotes 319.xx pas mal de cartes sont passées à la trappe et doivent se contenter du pilote 304.xx passé en "Legacy"
J'ai perdu ! :(
Hors ligne
#7 Le 24/10/2013, à 15:01
- xabilon
Re : [RESOLU] Cube...
guy-pierre a écrit :
j'ai une NVIDIA GEFORCE GT 650M
Il n'y a pas de pilote propriétaire installé...
Et sur le site de nVidia, ils proposent bien le 319 pour cette carte.
Dernière modification par xabilon (Le 24/10/2013, à 15:03)
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#8 Le 24/10/2013, à 15:05
- Ubuntu1988
Re : [RESOLU] Cube...
J'ai rien dit alors Et Bumblebee ?
Dernière modification par Ubuntu1988 (Le 24/10/2013, à 15:07)
J'ai perdu ! :(
Hors ligne
#9 Le 24/10/2013, à 15:08
- xabilon
Re : [RESOLU] Cube...
Ben si, tu as dit quelque chose, et d'ailleurs merci pour l'info, je vais pouvoir mettre à jour mon pilote 
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#10 Le 24/10/2013, à 16:49
- guy-pierre
Re : [RESOLU] Cube...
sorry, je n'ai pas pu répondre tout de suite...alors voici le contenu de Xorg.0.log...c'est relativement long :
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 50.632] X Protocol Version 11, Revision 0
[ 50.632] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 50.632] Current Operating System: Linux guy-N76VZ 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64
[ 50.632] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=7f357607-15a5-4726-9a91-3505319271d1 ro quiet splash vt.handoff=7
[ 50.632] Build Date: 15 October 2013 09:23:37AM
[ 50.632] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 50.632] Current version of pixman: 0.30.2
[ 50.632] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.632] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.632] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 05:06:31 2013
[ 50.648] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 50.648] (==) No Layout section. Using the first Screen section.
[ 50.648] (==) No screen section available. Using defaults.
[ 50.648] (**) |-->Screen "Default Screen Section" (0)
[ 50.648] (**) | |-->Monitor "<default monitor>"
[ 50.648] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50.648] (==) Automatically adding devices
[ 50.648] (==) Automatically enabling devices
[ 50.648] (==) Automatically adding GPU devices
[ 50.648] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 50.648] Entry deleted from font path.
[ 50.648] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 50.648] Entry deleted from font path.
[ 50.648] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 50.648] Entry deleted from font path.
[ 50.648] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 50.648] Entry deleted from font path.
[ 50.648] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 50.648] Entry deleted from font path.
[ 50.648] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 50.648] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 50.648] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.648] (II) Loader magic: 0x7f36ddc7bd20
[ 50.648] (II) Module ABI versions:
[ 50.648] X.Org ANSI C Emulation: 0.4
[ 50.648] X.Org Video Driver: 14.1
[ 50.648] X.Org XInput driver : 19.1
[ 50.648] X.Org Server Extension : 7.0
[ 50.649] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 50.650] (--) PCI:*(0:0:2:0) 8086:0166:1043:2103 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 50.650] (--) PCI: (0:1:0:0) 10de:0fd1:1043:2103 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 50.650] (II) Open ACPI successful (/var/run/acpid.socket)
[ 50.650] Initializing built-in extension Generic Event Extension
[ 50.650] Initializing built-in extension SHAPE
[ 50.650] Initializing built-in extension MIT-SHM
[ 50.650] Initializing built-in extension XInputExtension
[ 50.650] Initializing built-in extension XTEST
[ 50.650] Initializing built-in extension BIG-REQUESTS
[ 50.650] Initializing built-in extension SYNC
[ 50.650] Initializing built-in extension XKEYBOARD
[ 50.650] Initializing built-in extension XC-MISC
[ 50.650] Initializing built-in extension SECURITY
[ 50.650] Initializing built-in extension XINERAMA
[ 50.650] Initializing built-in extension XFIXES
[ 50.650] Initializing built-in extension RENDER
[ 50.650] Initializing built-in extension RANDR
[ 50.650] Initializing built-in extension COMPOSITE
[ 50.650] Initializing built-in extension DAMAGE
[ 50.650] Initializing built-in extension MIT-SCREEN-SAVER
[ 50.650] Initializing built-in extension DOUBLE-BUFFER
[ 50.650] Initializing built-in extension RECORD
[ 50.650] Initializing built-in extension DPMS
[ 50.650] Initializing built-in extension X-Resource
[ 50.650] Initializing built-in extension XVideo
[ 50.650] Initializing built-in extension XVideo-MotionCompensation
[ 50.650] Initializing built-in extension SELinux
[ 50.650] Initializing built-in extension XFree86-VidModeExtension
[ 50.650] Initializing built-in extension XFree86-DGA
[ 50.650] Initializing built-in extension XFree86-DRI
[ 50.650] Initializing built-in extension DRI2
[ 50.650] (II) LoadModule: "glx"
[ 50.718] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.718] (II) Module glx: vendor="X.Org Foundation"
[ 50.718] compiled for 1.14.3, module version = 1.0.0
[ 50.718] ABI class: X.Org Server Extension, version 7.0
[ 50.718] (==) AIGLX enabled
[ 50.718] Loading extension GLX
[ 50.718] (==) Matched intel as autoconfigured driver 0
[ 50.718] (==) Matched intel as autoconfigured driver 1
[ 50.718] (==) Matched vesa as autoconfigured driver 2
[ 50.718] (==) Matched modesetting as autoconfigured driver 3
[ 50.718] (==) Matched fbdev as autoconfigured driver 4
[ 50.718] (==) Assigned the driver to the xf86ConfigLayout
[ 50.718] (II) LoadModule: "intel"
[ 50.718] (WW) Warning, couldn't open module intel
[ 50.718] (II) UnloadModule: "intel"
[ 50.718] (II) Unloading intel
[ 50.718] (EE) Failed to load module "intel" (module does not exist, 0)
[ 50.718] (II) LoadModule: "vesa"
[ 50.718] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 50.719] (II) Module vesa: vendor="X.Org Foundation"
[ 50.719] compiled for 1.14.1, module version = 2.3.2
[ 50.719] Module class: X.Org Video Driver
[ 50.719] ABI class: X.Org Video Driver, version 14.1
[ 50.719] (II) LoadModule: "modesetting"
[ 50.719] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 50.719] (II) Module modesetting: vendor="X.Org Foundation"
[ 50.719] compiled for 1.14.1, module version = 0.8.0
[ 50.719] Module class: X.Org Video Driver
[ 50.719] ABI class: X.Org Video Driver, version 14.1
[ 50.719] (II) LoadModule: "fbdev"
[ 50.719] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 50.719] (II) Module fbdev: vendor="X.Org Foundation"
[ 50.719] compiled for 1.14.1, module version = 0.4.3
[ 50.719] Module class: X.Org Video Driver
[ 50.719] ABI class: X.Org Video Driver, version 14.1
[ 50.719] (==) Matched intel as autoconfigured driver 0
[ 50.719] (==) Matched intel as autoconfigured driver 1
[ 50.719] (==) Matched vesa as autoconfigured driver 2
[ 50.719] (==) Matched modesetting as autoconfigured driver 3
[ 50.719] (==) Matched fbdev as autoconfigured driver 4
[ 50.719] (==) Assigned the driver to the xf86ConfigLayout
[ 50.719] (II) LoadModule: "intel"
[ 50.719] (WW) Warning, couldn't open module intel
[ 50.719] (II) UnloadModule: "intel"
[ 50.719] (II) Unloading intel
[ 50.719] (EE) Failed to load module "intel" (module does not exist, 0)
[ 50.719] (II) LoadModule: "vesa"
[ 50.719] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 50.719] (II) Module vesa: vendor="X.Org Foundation"
[ 50.719] compiled for 1.14.1, module version = 2.3.2
[ 50.719] Module class: X.Org Video Driver
[ 50.719] ABI class: X.Org Video Driver, version 14.1
[ 50.719] (II) UnloadModule: "vesa"
[ 50.719] (II) Unloading vesa
[ 50.719] (II) Failed to load module "vesa" (already loaded, 0)
[ 50.719] (II) LoadModule: "modesetting"
[ 50.719] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 50.719] (II) Module modesetting: vendor="X.Org Foundation"
[ 50.719] compiled for 1.14.1, module version = 0.8.0
[ 50.719] Module class: X.Org Video Driver
[ 50.719] ABI class: X.Org Video Driver, version 14.1
[ 50.719] (II) UnloadModule: "modesetting"
[ 50.719] (II) Unloading modesetting
[ 50.719] (II) Failed to load module "modesetting" (already loaded, 0)
[ 50.719] (II) LoadModule: "fbdev"
[ 50.720] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 50.720] (II) Module fbdev: vendor="X.Org Foundation"
[ 50.720] compiled for 1.14.1, module version = 0.4.3
[ 50.720] Module class: X.Org Video Driver
[ 50.720] ABI class: X.Org Video Driver, version 14.1
[ 50.720] (II) UnloadModule: "fbdev"
[ 50.720] (II) Unloading fbdev
[ 50.720] (II) Failed to load module "fbdev" (already loaded, 0)
[ 50.720] (II) VESA: driver for VESA chipsets: vesa
[ 50.720] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 50.720] (II) FBDEV: driver for framebuffer: fbdev
[ 50.720] (++) using VT number 7
[ 50.720] vesa: Ignoring device with a bound kernel driver
[ 50.720] vesa: Ignoring device with a bound kernel driver
[ 50.720] (WW) Falling back to old probe method for vesa
[ 50.720] (II) modesetting(2): using drv /dev/dri/card0
[ 50.720] (WW) Falling back to old probe method for modesetting
[ 50.720] (WW) Falling back to old probe method for fbdev
[ 50.720] (II) Loading sub module "fbdevhw"
[ 50.720] (II) LoadModule: "fbdevhw"
[ 50.720] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 50.720] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 50.720] compiled for 1.14.3, module version = 0.0.2
[ 50.720] ABI class: X.Org Video Driver, version 14.1
[ 50.720] (EE) Screen 0 deleted because of no matching config section.
[ 50.720] (II) UnloadModule: "vesa"
[ 50.720] (EE) Screen 0 deleted because of no matching config section.
[ 50.720] (II) UnloadModule: "vesa"
[ 50.720] (II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.720] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 50.720] (==) modesetting(0): RGB weight 888
[ 50.720] (==) modesetting(0): Default visual is TrueColor
[ 50.720] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 50.720] (II) modesetting(0): Output LVDS-0 has no monitor section
[ 50.721] (II) modesetting(0): Output VGA-0 has no monitor section
[ 50.721] (II) modesetting(0): EDID for output LVDS-0
[ 50.721] (II) modesetting(0): Manufacturer: AUO Model: 129e Serial#: 0
[ 50.721] (II) modesetting(0): Year: 2011 Week: 0
[ 50.721] (II) modesetting(0): EDID Version: 1.4
[ 50.721] (II) modesetting(0): Digital Display Input
[ 50.721] (II) modesetting(0): 6 bits per channel
[ 50.721] (II) modesetting(0): Digital interface is undefined
[ 50.721] (II) modesetting(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 50.721] (II) modesetting(0): Gamma: 2.20
[ 50.721] (II) modesetting(0): No DPMS capabilities specified
[ 50.721] (II) modesetting(0): Supported color encodings: RGB 4:4:4
[ 50.721] (II) modesetting(0): First detailed timing is preferred mode
[ 50.721] (II) modesetting(0): Preferred mode is native pixel format and refresh rate
[ 50.721] (II) modesetting(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 50.721] (II) modesetting(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 50.721] (II) modesetting(0): Manufacturer's mask: 0
[ 50.721] (II) modesetting(0): Supported detailed timing:
[ 50.721] (II) modesetting(0): clock: 97.5 MHz Image Size: 382 x 214 mm
[ 50.721] (II) modesetting(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1754 h_border: 0
[ 50.721] (II) modesetting(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 50.721] (II) modesetting(0): Unknown vendor-specific block f
[ 50.721] (II) modesetting(0): AUO
[ 50.722] (II) modesetting(0): B173RTN01.2
[ 50.722] (II) modesetting(0): EDID (in hex):
[ 50.722] (II) modesetting(0): 00ffffffffffff0006af9e1200000000
[ 50.722] (II) modesetting(0): 001501049026157802c4959e57539226
[ 50.722] (II) modesetting(0): 0f505400000001010101010101010101
[ 50.722] (II) modesetting(0): 0101010101011b26409a60841a303020
[ 50.722] (II) modesetting(0): 36007ed6100000180000000f00000000
[ 50.722] (II) modesetting(0): 00000000000000000020000000fe0041
[ 50.722] (II) modesetting(0): 554f0a202020202020202020000000fe
[ 50.722] (II) modesetting(0): 004231373352544e30312e32200a00e5
[ 50.722] (II) modesetting(0): Printing probed modes for output LVDS-0
[ 50.722] (II) modesetting(0): Modeline "1600x900"x60.1 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 50.722] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 50.722] (II) modesetting(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 50.722] (II) modesetting(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 50.722] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 50.722] (II) modesetting(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 50.722] (II) modesetting(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 50.722] (II) modesetting(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 50.722] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 50.722] (II) modesetting(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 50.722] (II) modesetting(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 50.722] (II) modesetting(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 50.722] (II) modesetting(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 50.722] (II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 50.722] (II) modesetting(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 50.722] (II) modesetting(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 50.722] (II) modesetting(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 50.722] (II) modesetting(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 50.722] (II) modesetting(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 50.722] (II) modesetting(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 50.723] (II) modesetting(0): EDID for output VGA-0
[ 50.723] (II) modesetting(0): Output LVDS-0 connected
[ 50.723] (II) modesetting(0): Output VGA-0 disconnected
[ 50.723] (II) modesetting(0): Using exact sizes for initial modes
[ 50.723] (II) modesetting(0): Output LVDS-0 using initial mode 1600x900
[ 50.723] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 50.723] (==) modesetting(0): DPI set to (96, 96)
[ 50.723] (II) Loading sub module "fb"
[ 50.723] (II) LoadModule: "fb"
[ 50.723] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50.723] (II) Module fb: vendor="X.Org Foundation"
[ 50.723] compiled for 1.14.3, module version = 1.0.0
[ 50.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.723] (II) Loading sub module "shadow"
[ 50.723] (II) LoadModule: "shadow"
[ 50.723] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 50.723] (II) Module shadow: vendor="X.Org Foundation"
[ 50.723] compiled for 1.14.3, module version = 1.1.0
[ 50.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.723] (II) UnloadModule: "fbdev"
[ 50.723] (II) Unloading fbdev
[ 50.723] (II) UnloadSubModule: "fbdevhw"
[ 50.724] (II) Unloading fbdevhw
[ 50.724] (==) Depth 24 pixmap format is 32 bpp
[ 50.724] (==) modesetting(0): Backing store disabled
[ 50.724] (==) modesetting(0): Silken mouse enabled
[ 50.724] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 50.724] (==) modesetting(0): DPMS enabled
[ 50.740] (--) RandR disabled
[ 50.742] (II) SELinux: Disabled on system
[ 50.743] (II) AIGLX: Screen 0 is not DRI2 capable
[ 50.743] (II) AIGLX: Screen 0 is not DRI capable
[ 50.875] (II) AIGLX: Loaded and initialized swrast
[ 50.875] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 50.876] (II) modesetting(0): Damage tracking initialized
[ 50.876] (II) modesetting(0): Setting screen physical size to 423 x 238
[ 50.883] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 50.885] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 50.885] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 50.885] (II) LoadModule: "evdev"
[ 50.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 50.885] (II) Module evdev: vendor="X.Org Foundation"
[ 50.885] compiled for 1.14.1, module version = 2.7.3
[ 50.885] Module class: X.Org XInput Driver
[ 50.885] ABI class: X.Org XInput driver, version 19.1
[ 50.885] (II) Using input driver 'evdev' for 'Power Button'
[ 50.885] (**) Power Button: always reports core events
[ 50.885] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 50.885] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 50.885] (--) evdev: Power Button: Found keys
[ 50.885] (II) evdev: Power Button: Configuring as keyboard
[ 50.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 50.885] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 50.885] (**) Option "xkb_rules" "evdev"
[ 50.885] (**) Option "xkb_model" "pc105"
[ 50.885] (**) Option "xkb_layout" "fr"
[ 50.887] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[ 50.887] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 50.887] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 50.887] (II) Using input driver 'evdev' for 'Video Bus'
[ 50.887] (**) Video Bus: always reports core events
[ 50.887] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 50.887] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 50.887] (--) evdev: Video Bus: Found keys
[ 50.887] (II) evdev: Video Bus: Configuring as keyboard
[ 50.887] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 50.887] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 50.887] (**) Option "xkb_rules" "evdev"
[ 50.887] (**) Option "xkb_model" "pc105"
[ 50.887] (**) Option "xkb_layout" "fr"
[ 50.888] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 50.888] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 50.888] (II) Using input driver 'evdev' for 'Video Bus'
[ 50.888] (**) Video Bus: always reports core events
[ 50.888] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 50.888] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 50.888] (--) evdev: Video Bus: Found keys
[ 50.888] (II) evdev: Video Bus: Configuring as keyboard
[ 50.888] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4"
[ 50.888] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 50.888] (**) Option "xkb_rules" "evdev"
[ 50.888] (**) Option "xkb_model" "pc105"
[ 50.888] (**) Option "xkb_layout" "fr"
[ 50.888] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 50.888] (II) No input driver specified, ignoring this device.
[ 50.888] (II) This device may have been added with another device file.
[ 50.888] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 50.888] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 50.888] (II) Using input driver 'evdev' for 'Sleep Button'
[ 50.888] (**) Sleep Button: always reports core events
[ 50.888] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 50.888] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 50.888] (--) evdev: Sleep Button: Found keys
[ 50.888] (II) evdev: Sleep Button: Configuring as keyboard
[ 50.888] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 50.888] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 50.888] (**) Option "xkb_rules" "evdev"
[ 50.888] (**) Option "xkb_model" "pc105"
[ 50.888] (**) Option "xkb_layout" "fr"
[ 50.888] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 50.888] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 50.889] (II) config/udev: Adding input device HP Wireless Laser Mobile Mouse (/dev/input/event6)
[ 50.889] (**) HP Wireless Laser Mobile Mouse: Applying InputClass "evdev pointer catchall"
[ 50.889] (II) Using input driver 'evdev' for 'HP Wireless Laser Mobile Mouse'
[ 50.889] (**) HP Wireless Laser Mobile Mouse: always reports core events
[ 50.889] (**) evdev: HP Wireless Laser Mobile Mouse: Device: "/dev/input/event6"
[ 50.889] (--) evdev: HP Wireless Laser Mobile Mouse: Vendor 0x3f0 Product 0x8307
[ 50.889] (--) evdev: HP Wireless Laser Mobile Mouse: Found 9 mouse buttons
[ 50.889] (--) evdev: HP Wireless Laser Mobile Mouse: Found scroll wheel(s)
[ 50.889] (--) evdev: HP Wireless Laser Mobile Mouse: Found relative axes
[ 50.889] (--) evdev: HP Wireless Laser Mobile Mouse: Found x and y relative axes
[ 50.889] (II) evdev: HP Wireless Laser Mobile Mouse: Configuring as mouse
[ 50.889] (II) evdev: HP Wireless Laser Mobile Mouse: Adding scrollwheel support
[ 50.889] (**) evdev: HP Wireless Laser Mobile Mouse: YAxisMapping: buttons 4 and 5
[ 50.889] (**) evdev: HP Wireless Laser Mobile Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 50.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input6/event6"
[ 50.889] (II) XINPUT: Adding extended input device "HP Wireless Laser Mobile Mouse" (type: MOUSE, id 10)
[ 50.889] (II) evdev: HP Wireless Laser Mobile Mouse: initialized for relative axes.
[ 50.889] (**) HP Wireless Laser Mobile Mouse: (accel) keeping acceleration scheme 1
[ 50.889] (**) HP Wireless Laser Mobile Mouse: (accel) acceleration profile 0
[ 50.889] (**) HP Wireless Laser Mobile Mouse: (accel) acceleration factor: 2.000
[ 50.889] (**) HP Wireless Laser Mobile Mouse: (accel) acceleration threshold: 4
[ 50.889] (II) config/udev: Adding input device HP Wireless Laser Mobile Mouse (/dev/input/mouse0)
[ 50.889] (II) No input driver specified, ignoring this device.
[ 50.889] (II) This device may have been added with another device file.
[ 50.889] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event10)
[ 50.889] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[ 50.889] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[ 50.889] (**) ASUS USB2.0 Webcam: always reports core events
[ 50.889] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event10"
[ 50.889] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2883
[ 50.889] (--) evdev: ASUS USB2.0 Webcam: Found keys
[ 50.889] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[ 50.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event10"
[ 50.889] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 11)
[ 50.889] (**) Option "xkb_rules" "evdev"
[ 50.889] (**) Option "xkb_model" "pc105"
[ 50.889] (**) Option "xkb_layout" "fr"
[ 50.889] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 50.890] (II) No input driver specified, ignoring this device.
[ 50.890] (II) This device may have been added with another device file.
[ 50.890] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 50.890] (II) No input driver specified, ignoring this device.
[ 50.890] (II) This device may have been added with another device file.
[ 50.890] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 50.890] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 50.890] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 50.890] (**) Asus WMI hotkeys: always reports core events
[ 50.890] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 50.890] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 50.890] (--) evdev: Asus WMI hotkeys: Found keys
[ 50.890] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 50.890] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event9"
[ 50.890] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 50.890] (**) Option "xkb_rules" "evdev"
[ 50.890] (**) Option "xkb_model" "pc105"
[ 50.890] (**) Option "xkb_layout" "fr"
[ 50.890] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 50.890] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 50.890] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 50.890] (**) AT Translated Set 2 keyboard: always reports core events
[ 50.890] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 50.890] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 50.890] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 50.890] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 50.890] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 50.890] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 50.890] (**) Option "xkb_rules" "evdev"
[ 50.890] (**) Option "xkb_model" "pc105"
[ 50.890] (**) Option "xkb_layout" "fr"
[ 57.098] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 57.098] (II) modesetting(0): Printing DDC gathered Modelines:
[ 57.098] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 57.173] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 57.173] (II) modesetting(0): Printing DDC gathered Modelines:
[ 57.173] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 57.677] (II) XKB: reuse xkmfile /var/lib/xkb/server-CB537B66032B0DBE0AE956F537017A59DB020654.xkm
[ 57.681] (II) XKB: reuse xkmfile /var/lib/xkb/server-1773A72ADF3912178EB836318CC241E672AD6AB1.xkm
[ 61.567] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 61.567] (II) modesetting(0): Printing DDC gathered Modelines:
[ 61.567] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23511.979] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23511.979] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23511.979] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23536.750] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23536.750] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23536.750] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23550.236] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23550.236] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23550.236] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23580.847] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23580.847] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23580.847] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23649.564] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23649.564] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23649.564] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23720.958] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23720.958] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23720.958] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23746.043] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23746.043] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23746.043] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 23806.995] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 23806.995] (II) modesetting(0): Printing DDC gathered Modelines:
[ 23806.995] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP)
[ 35237.097] (II) modesetting(0): EDID vendor "AUO", prod id 4766
[ 35237.097] (II) modesetting(0): Printing DDC gathered Modelines:
[ 35237.097] (II) modesetting(0): Modeline "1600x900"x0.0 97.55 1600 1648 1680 1754 900 903 909 926 -hsync -vsync (55.6 kHz eP) Hors ligne
#11 Le 24/10/2013, à 17:37
- xabilon
Re : [RESOLU] Cube...
C'est le pilote générique "vesa" qui est utilisé, il est donc normal que tu n'aies pas l'accélération graphique. Et curieusement, "nvidia" ou "nouveau" n'apparaissent jamais dans ton Xorg.0.log
Si tu ne peux pas désactiver la carte Intel via le BIOS, alors c'est Bumblebee la solution. Que donne cette commande :
lspci -vnn | grep '\''[030[02]\]'Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#12 Le 25/10/2013, à 03:52
- guy-pierre
Re : [RESOLU] Cube...
la commande donne :
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev ff) (prog-if ff)De plus, je viens de voir dans mon gestionnaire de paquets Muon que sont installés : bumblebee et bumblebee-nvidia. En revanche, blumbebee-dbg et primus ne sont pas installés.
Enfin, j'ai constaté que dans le dossier /var/log/ existaient, outre le fichier /Xorg.0.log, un fichier Xorg.0.log.old, un fichier Xorg.1.log, un fichier Xorg.1.old.log, un fichier Xorg.8.log et un fichier Xorg.8.old.log
C'est grave docteur ? 
Dernière modification par guy-pierre (Le 25/10/2013, à 04:10)
Hors ligne
#13 Le 25/10/2013, à 08:25
- xabilon
Re : [RESOLU] Cube...
Les différents fichiers Xorg.?.log, ce sont simplement des archives, aucun souci.
Et là oui, je crois que Bumblebee est la solution. Malheureusement je ne l'utilise pas, donc je ne peux que te conseiller la doc à ce sujet (voir message#8 de Ubuntu1988).
Peut-être aussi ceci, mais pour l'instant ça semble un peu expérimental.
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#14 Le 25/10/2013, à 09:29
- guy-pierre
Re : [RESOLU] Cube...
ok...mais que dois-je faire avec Bumblebee ?
Hors ligne
#15 Le 25/10/2013, à 10:00
- ipslore
Re : [RESOLU] Cube...
J'ai utilisé avec succès la page de la doc http://doc.ubuntu-fr.org/bumblebee sur une installation 'neuve' de kubuntu 13.04 il y a quelques mois. Visiblement le support de la part de Nvidia est en train d'évoluer : http://p3ter.fr/article49/ubuntu-13-10- … -bumblebee. Ça peut de donner des pistes...
Je vais attendre un peu avant de passer à la 13.10 moi...
Hors ligne
#16 Le 25/10/2013, à 12:55
- guy-pierre
Re : [RESOLU] Cube...
j'ai installé bumblebee mais cela ne marche toujours pas. Moi aussi je regrette d'avoir installé la 13.10 si tôt....:/
Hors ligne
#17 Le 25/10/2013, à 17:00
- xabilon
Re : [RESOLU] Cube...
guy-pierre a écrit :
ok...mais que dois-je faire avec Bumblebee ?
Ben désolé, mais je ne sais pas. Je crois qu'il y a une discussion dédiée sur le forum, puisque le développeur de Bumblebee est membre.
Edit : ./viewtopic.php?id=1230851
Dernière modification par xabilon (Le 25/10/2013, à 17:03)
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#18 Le 05/11/2013, à 09:23
- guy-pierre
Re : [RESOLU] Cube...
Bon, problème résolu .... en repassant de la 13.10 à la 13.04. OpenGL, nécessaire notamment au cube, est de nouveau actif 
. Finalement, je vais rester avec la 13.04 car la 13.10 est trop instable, du moins chez moi. Je crois que je ne vais upgrader que sur la 14.04 ou attendre que les bugs de la 13.10 soient réglés.
Hors ligne
#19 Le 05/11/2013, à 13:59
- Ubuntu1988
Re : [RESOLU] Cube...
La 13.04 n'est maintenue que jusqu'en Janvier.
J'ai perdu ! :(
Hors ligne
Pages : 1