#1 Le 26/10/2013, à 20:17
- xunil2003
Comment savoir sur quel disques est installé les distributions ???
Bonsoir,
J'espère est sur la bonne rubrique du forum.
Je voudrai savoir si il y a un moyen efficace pour savoir sur quel disque dur est installer une distribution ?
Le truc c'est de savoir sur quel distribution il y a d'installer Windows XP , Windows 7 / Linux Ubuntu / Linux Debian ???
Exemple :
serveur@serveur-msi:~/Documents$ sudo fdisk -l
[sudo] password for serveur:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0003b67e
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 2048 23439547 11718750 83 Linux
/dev/sda2 23441406 1953523711 965041153 5 Étendue
/dev/sda5 23441408 35158015 5858304 82 partition d'échange Linux / Solaris
/dev/sda6 35160064 44922879 4881408 83 Linux
/dev/sda7 44924928 54687743 4881408 83 Linux
/dev/sda8 54689792 152344575 48827392 83 Linux
/dev/sda9 152346624 1052934143 450293760 83 Linux
/dev/sda10 1052936192 1953523711 450293760 83 Linux
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xe1224255
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 2048 488378367 244188160 7 HPFS/NTFS/exFAT
/dev/sdb2 488378368 976754687 244188160 7 HPFS/NTFS/exFAT
/dev/sdb3 976754688 1953509375 488377344 7 HPFS/NTFS/exFAT
/dev/sdb4 1953509376 3907026943 976758784 f Étendue W95 (LBA)
/dev/sdb5 1953511424 2930266111 488377344 7 HPFS/NTFS/exFAT
/dev/sdb6 2930268160 3907026943 488379392 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xe1224253
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdc1 * 2048 976756735 488377344 7 HPFS/NTFS/exFAT
/dev/sdc2 976756736 1953511423 488377344 7 HPFS/NTFS/exFAT
/dev/sdc3 1953511424 2930266111 488377344 7 HPFS/NTFS/exFAT
/dev/sdc4 2930266112 3907026943 488380416 f Étendue W95 (LBA)
/dev/sdc5 2930268160 3907026943 488379392 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x6e7ebd64
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdd1 * 2048 3907026943 1953512448 7 HPFS/NTFS/exFAT
Disk /dev/sde: 600.1 GB, 600127266816 bytes
255 têtes, 63 secteurs/piste, 72961 cylindres, total 1172123568 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x255195ef
Périphérique Amorce Début Fin Blocs Id Système
/dev/sde1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sde2 206848 390844415 195318784 7 HPFS/NTFS/exFAT
/dev/sde3 390844416 781481983 195318784 7 HPFS/NTFS/exFAT
/dev/sde4 781481984 1172119551 195318784 7 HPFS/NTFS/exFAT
serveur@serveur-msi:~/Documents$
Merci.
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne
#2 Le 26/10/2013, à 20:50
- f.x0
Re : Comment savoir sur quel disques est installé les distributions ???
Bonjour xunil2003,
la commande
sudo blkid
peut être un peu plus explicite
SOPI
Hors ligne
#3 Le 26/10/2013, à 21:06
- xunil2003
Re : Comment savoir sur quel disques est installé les distributions ???
Bonsoir,
serveur@serveur-msi:~/Documents$ sudo blkid
[sudo] password for serveur:
/dev/sda1: UUID="a55d3cb1-eaf7-4ce1-93ce-7afbf6efd611" TYPE="ext4"
/dev/sda5: UUID="19cd1b73-495b-40c2-955d-2ad7471fd1b1" TYPE="swap"
/dev/sda6: UUID="2c57dbaf-7d75-4a28-b9ec-36be96eb2935" TYPE="ext4"
/dev/sda7: UUID="a82ab4b9-b5a8-404b-854c-933c137282ac" TYPE="ext4"
/dev/sda8: UUID="16fd0f57-a874-416f-9a84-7366fc9081df" TYPE="ext4"
/dev/sda9: UUID="ca732a88-df9a-4dc9-8eb0-704ba5a3f254" TYPE="ext4"
/dev/sda10: UUID="ec079ab6-ffdc-402c-b0ca-fc13b56c98bd" TYPE="ext4"
/dev/sdb1: LABEL="Windows_XP" UUID="4898869298867E66" TYPE="ntfs"
/dev/sdb2: LABEL="Disk1_Vol2" UUID="8640F4DD40F4D4C1" TYPE="ntfs"
/dev/sdb3: LABEL="Disk1_Vol3" UUID="1A50FE6A50FE4BCF" TYPE="ntfs"
/dev/sdb5: LABEL="Disk1_Vol4" UUID="56308CB7308CA01B" TYPE="ntfs"
/dev/sdb6: LABEL="Disk1_Vol5" UUID="C85656FA5656E8A8" TYPE="ntfs"
/dev/sdc1: LABEL="Disk3_Vol1" UUID="4A52B26252B25305" TYPE="ntfs"
/dev/sdc2: LABEL="Disk3_vol2" UUID="C6F89E32F89E20AB" TYPE="ntfs"
/dev/sdc3: LABEL="Disk3_Vol3" UUID="BE2C92D72C9289D3" TYPE="ntfs"
/dev/sdc5: LABEL="Disk3_Vol4" UUID="502A23702A235270" TYPE="ntfs"
/dev/sdd1: LABEL="Disk6_Vol1" UUID="5A48E55348E52F07" TYPE="ntfs"
/dev/sde1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="98A458FCA458DE76" TYPE="ntfs"
/dev/sde2: LABEL="Disk5_Vol1" UUID="CE0048600048521F" TYPE="ntfs"
/dev/sde3: LABEL="Disk5_Vol2" UUID="F2D0A1EED0A1B8ED" TYPE="ntfs"
/dev/sde4: LABEL="Disk5_Vol3" UUID="D0C45C0FC45BF666" TYPE="ntfs"
serveur@serveur-msi:~/Documents$
En deux mots comment savoir quel distribution est installé sur les disques dur.
Merci.
Dernière modification par xunil2003 (Le 26/10/2013, à 21:08)
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne
#4 Le 26/10/2013, à 21:12
- f.x0
Re : Comment savoir sur quel disques est installé les distributions ???
En deux mots ??? regardes bootinfo
SOPI
Hors ligne
#5 Le 26/10/2013, à 21:39
- jilucorg
Re : Comment savoir sur quel disques est installé les distributions ???
En un seul mot : palimpsest (AKA gnome-disks)
jiluc.
––
Pour soutenir concrètement le logiciel libre : l'April ! http://www.april.org
Hors ligne
#6 Le 26/10/2013, à 22:33
- sinbad83
Re : Comment savoir sur quel disques est installé les distributions ???
Très simple: sudo os-prober qui donne les OS installés, sauf l'OS actuellement en fonction.
~$ sudo os-prober
/dev/sda1:Microsoft Windows XP Professionnel:Windows:chain
/dev/sda2:Ubuntu 12.10 (12.10):Ubuntu:linux
/dev/sda5:Ubuntu 10.04.4 LTS (10.04):Ubuntu1:linux
/dev/sdb5:Ubuntu 12.04.3 LTS (12.04):Ubuntu2:linux
/dev/sdb8:Ubuntu 13.04 (13.04):Ubuntu3:linux
Dernière modification par sinbad83 (Le 26/10/2013, à 22:35)
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#7 Le 27/10/2013, à 00:50
- xunil2003
Re : Comment savoir sur quel disques est installé les distributions ???
Bonsoir,
Merci sinbad83 t'as commande est très utiel, je vais pouvoir réinstallé Ubuntu sur mon nouveau PC.
Il y a 4 mois mon PC est tombé en panne, la carte-mère ma lâchement abandonné en plein travail. impossible de le rallumé. carte-mère h. S
Quand j'ai démonté ma bécane pour la garantie, il y avait 3 disques durs, je ne savais plus sur quel disque Kubuntu était installé.
Je viens juste d'essayer avec Kubuntu 12.04 LTS Live CD
sudo os-prober
/dev/sdb1:Mageia 3 (3):Mageia:linux
/dev/sdb9:unknown Linux distribution:Linux:linux
/dev/sdc1:Ubuntu 12.04.2 LTS (12.04):Ubuntu:linux
Et quand je vérifie avec fdisk j'ai ceci comme message:
WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdc1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
Je vais perdre mon /home a la réinstallation ?
Merci
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne
#8 Le 27/10/2013, à 01:03
- f.x0
Re : Comment savoir sur quel disques est installé les distributions ???
Les résultats de sudo os-prober me surprennent :
fdisk blkid os-prober
/dev/sdb1 HPFS/NTFS/exFAT ntfs Mageia3 (3):linux
/dev/sdb9 ??? ??? unknown Linux
/dev/sdc1 HPFS/NTFS/exFAT ntfs Ubuntu 12.04.2 LTS:linux
Dernière modification par f.x0 (Le 27/10/2013, à 01:04)
SOPI
Hors ligne
#9 Le 27/10/2013, à 01:11
- xunil2003
Re : Comment savoir sur quel disques est installé les distributions ???
Bonsoir,
C'est normal, le dernier test est effectué sur une autre machine, là où je dois réinstaller Kubuntu.
sudo os-prober
/dev/sdb1:Mageia 3 (3):Mageia:linux
/dev/sdb9:unknown Linux distribution:Linux:linux
/dev/sdc1:Ubuntu 12.04.2 LTS (12.04):Ubuntu:linux
Et quand je vérifie avec fdisk le disque "/dev/sdc" j'ai ceci comme message:
kubuntu@kubuntu:~$ sudo fdisk -l /dev/sdc
WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdc1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
kubuntu@kubuntu:~$
Avec sfdisk
kubuntu@kubuntu:~$ sudo sfdisk -l /dev/sdc
WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util sfdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdc: 364801 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdc1 0+ 267349- 267350- 2147483647+ ee GPT
start: (c,h,s) expected (0,0,2) found (0,0,1)
/dev/sdc2 0 - 0 0 0 Empty
/dev/sdc3 0 - 0 0 0 Empty
/dev/sdc4 0 - 0 0 0 Empty
kubuntu@kubuntu:~$
Avec gparted
partition - File system - Mount point - size - used - unsed - Flag
/dev/sdc1 - ext4 - media/sdc1 - 23.28 GIB - 10.76 GIB - 12.52 GIB
/dev/sdc2 - swap - 11.18 GIB
/dev/sdc3 - ext4 - /media/04fdb08a-840f-4b9b-902c-c27b2bdb2c71 - 4.66 GIB - 1.96 GIB - 2.70 GIB
/dev/sdc4 - ext4 - /media/d0ef4b5f-f29f-4501-9131-c3025647b64b - 18.63 GIB - 668.39 MB - 17.97 MB
/dev/sdc5 - ext4 - /media/c57939c2-7528-4a64-bc13-eaaf87883022 - 7.45 GIB - 993.66 MB - 6.48 GIB
/dev/sdc6 - ext4 - /media/4f3a06a3-62c3-4619-99d2-4df51785885c - 866.31 GIB - 472.62 GIB - 458.89 GIB
/dev/sdc7 - ext4 - Not mounted - 931.51 GIB - 472.62 GIB - 458.89 GIB
/dev/sdc8 - ext4 - Not mounted - 931.51 GIB - 14.81 GIB - 916.69 GIB
Gparted détail vraiment tout.
Et en cherchant sur le net j'ai trouvé gparted pour le shell , il s'agit de parted.
Avec parted
kubuntu@kubuntu:~$ sudo parted /dev/sdc
GNU Parted 2.3
Using /dev/sdc
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) help
align-check TYPE N check partition N for TYPE(min|opt)
alignment
check NUMBER do a simple check on the file system
cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER copy file system to another partition
help [COMMAND] print general help, or help on
COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partition
table)
mkfs NUMBER FS-TYPE make a FS-TYPE file system on
partition NUMBER
mkpart PART-TYPE [FS-TYPE] START END make a partition
mkpartfs PART-TYPE FS-TYPE START END make a partition with a file system
move NUMBER START END move partition NUMBER
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table,
available devices, free space, all found partitions, or a particular
partition
quit exit program
rescue START END rescue a lost partition near START
and END
resize NUMBER START END resize partition NUMBER and its file
system
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition
NUMBER
unit UNIT set the default unit to UNIT
version display the version number and
copyright information of GNU Parted
(parted) print
Model: ATA ST3000DM001-9YN1 (scsi)
Disk /dev/sdc: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17,4kB 25,0GB 25,0GB ext4
2 25,0GB 37,0GB 12,0GB linux-swap(v1)
3 37,0GB 42,0GB 5000MB ext4
4 42,0GB 62,0GB 20,0GB ext4
5 62,0GB 70,0GB 8000MB ext4
6 70,0GB 1000GB 930GB ext4
7 1000GB 2000GB 1000GB ext4
8 2000GB 3001GB 1000GB ext4
(parted) quit
kubuntu@kubuntu:~$
Quand je réinstall Kubuntu depuis la Live cd, il m'affiche ce message :
La partition /dev/sdc1 affectée à / commence avec un décalage de 1024
octets de l'alignement minimun pour ce disque , ce qui peut avoir
des conséquences importante sur les performances.
bla bal bla bla.....
[Continuer] [Revenir en arrière]
quand je clique sur "continuer" et sur "Installer maintenant" le message ce réaffiche.
Je n'ai pas d'autre disque dur pour faire une sauvegarde de 3To.
Voila comment j'ai déclaré les partitions dans : Préparation des partitions (de l'installation de Kubuntu Live-cd)
/dev/sdc1 - ext4 - /
/dev/sdc2 - swap -
/dev/sdc3 - ext4 - /var
/dev/sdc4 - ext4 - /var/www
/dev/sdc5 - ext4 - /opt
/dev/sdc6 - ext4 - /home
/dev/sdc7 - ext4 - /media/travail
/dev/sdc8 - ext4 - /media/sauvegarde
Chargeur d'amorçage /dev/sdc
Pourtant avec l'ancienne bécane je n'ai pas eu ce problème ?
Comment je peut faire ?
Merci.
Dernière modification par xunil2003 (Le 27/10/2013, à 13:13)
- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 / Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE
Hors ligne