Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 02/12/2013, à 20:59

pollux59510

Re : Besoin d'aide sur installation 10.04

Bon, à force de bidouiller dans tous les coins, j'ai préféré refaire l'instal.
Du coup j'ai retrouvé les deux pilotes.

Symptomes actuels : je vois bien tous les reseaux wifi alentour, mais je n'arrive pas à me connecter sur le mien (le mdp est correct).

Du coup je vous repost les commandes précédentes, résultat d"une instal propre et sans bidouille aucune :

fred@fred-laptop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.4 LTS"
fred@fred-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c05a Logitech, Inc. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0c45:63e4 Microdia 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
fred@fred-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
fred@fred-laptop:~$ lspci -nn | grep -i net
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
fred@fred-laptop:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
	Kernel driver in use: i915
	Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
	Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
	Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
	Kernel modules: i2c-i801
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
	Kernel modules: sdhci-pci
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
	Kernel driver in use: jmb38x_ms
	Kernel modules: jmb38x_ms
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
	Kernel driver in use: r8169
	Kernel modules: r8169
fred@fred-laptop:~$ sudo lshw -C network
[sudo] password for fred: 
  *-network               
       description: Network controller
       product: BCM4312 802.11b/g
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=b43-pci-bridge latency=0
       resources: irq:17 memory:f0200000-f0203fff
  *-network
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: eth0
       version: 02
       serial: 00:21:70:bb:4c:b8
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.18 latency=0 link=yes multicast=yes port=MII speed=100MB/s
       resources: irq:27 ioport:2000(size=256) memory:f0610000-f0610fff(prefetchable) memory:f0600000-f060ffff(prefetchable) memory:f0620000-f063ffff(prefetchable)
  *-network
       description: Wireless interface
       physical id: 2
       logical name: wlan0
       serial: 00:23:08:09:f4:10
       capabilities: ethernet physical wireless
       configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
fred@fred-laptop:~$ 

Encore merci par avance...


CentOS 7, CentOS8, ... et puis plus rien...

Hors ligne

#27 Le 02/12/2013, à 21:14

moko138

Re : Besoin d'aide sur installation 10.04

De mémoire, tu as un sous-menu pour rechercher des pilotes non-libres.
Tu peux refuser celui de la carte graphique et accepter celui de ta carte wifi.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#28 Le 02/12/2013, à 21:22

pollux59510

Re : Besoin d'aide sur installation 10.04

Je viens de tester avec les deux pilotes successivement ; rien n'y fais.
Seule différence : avec le premier je vois tous les réseaux, avec le second je ne vois rien.

De mémoire la solution avait été d'attribuer une adresse IP fixe à ma connexion, mais là ... ???

Vu que c'était sur un forum aujourd'hui disparu :-(


CentOS 7, CentOS8, ... et puis plus rien...

Hors ligne

#29 Le 03/12/2013, à 03:02

moko138

Re : Besoin d'aide sur installation 10.04

Ne mélangeons pas tout :

- Quels "deux pilotes" successifs ? (de ta carte)
   - as-tu désinstallé l'un avant d'installer l'autre ou non ?
       - si oui, désinstallation complète ou non ?

- "IP fixe" : là, tu ne parles plus de ta carte...

Et comme je ne suis pas un spécialiste de ces questions de wifi, box et dhcp, il faudrait qu'un expert se penche sur ton cas.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#30 Le 03/12/2013, à 13:27

maxire

Re : Besoin d'aide sur installation 10.04

Pollux59510,

Il serait bien que tu fournisses toutes les informations demandées dans le fil À lire avant de poster'
J'ai remarqué que tu nous fournis uniquement une partie de ces informations, c'est insuffisant.
Il serait également judicieux de formuler ta demande d'aide dans le forum spécialisé wifi.
Je suis comme moko138, pas vraiment un connaisseur en wifi, ton sujet dépasse un simple problème d'installation de ubuntu.

[Edit]
En cherchant dans ce forum, voilà ce que tu pourrais appliquer comme solution :
[Resolu]Carte boadcom 43xxx pas de conexion wifi

Dernière modification par maxire (Le 03/12/2013, à 13:36)


Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail

Hors ligne

#31 Le 03/12/2013, à 20:31

pollux59510

Re : Besoin d'aide sur installation 10.04

Merci à tous pour le temps que vous avez passé sur mes petits problèmes.
Comme suggéré, j'ai posté dans la rubrique réseau ; wait & see...

F.


CentOS 7, CentOS8, ... et puis plus rien...

Hors ligne