Pages : 1
#1 Le 23/12/2013, à 22:09
- fruity101079
[Résolu] MBR windows n'existe plus.
... enfin je crois.
A force de bidouille suite à différents problèmes, j'ai récupéré un système fonctionnel, si ce n'est que windows ne démarre plus.
J'en déduis que c'est un soucis de MBR vu que j'ai pas mal trifouillé boot-repair, et autre commande de réparation du grub, etc...
Alors j'ai vu que je pouvais tenter de réparer windows depuis le cd windows, puis de réinstaller le grub pour reprendre la main sur le démarrage, mais n'y a-t-il aucune autre manière de faire?
Ci-joint rapport bootrepair après réparation du grub:
http://paste.ubuntu.com/6625301/
Dernière modification par fruity101079 (Le 24/12/2013, à 17:16)
Ubuntu 14.04
Kubuntu 14.10
Hors ligne
#2 Le 24/12/2013, à 00:59
- mikedafunk
Re : [Résolu] MBR windows n'existe plus.
Normalement il suffit de faire ça : http://doc.ubuntu-fr.org/grub-pc#recher … atiquement
Lubuntu 22.04 sur Lenovo AX81 et pas mal d'Amiga
Mon blog : http://mikedafunk.over-blog.org
Hors ligne
#3 Le 24/12/2013, à 10:13
- malbo
Re : [Résolu] MBR windows n'existe plus.
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 94 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 94 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 94 for .
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdd.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 13.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20130218
Boot sector info: Syslinux looks at sector 2067952 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdd1 starts
at sector 0. But according to the info from fdisk,
sdd1 starts at sector 62.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 300.1 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders, total 586072368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 586,072,063 586,070,016 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 7,807,590 72,822,644 65,015,055 83 Linux
/dev/sdb2 72,822,706 474,688,619 401,865,914 f W95 Extended (LBA)
/dev/sdb5 72,822,708 254,469,599 181,646,892 83 Linux
/dev/sdb6 254,469,663 474,688,619 220,218,957 83 Linux
/dev/sdb3 * 474,704,685 976,768,064 502,063,380 7 NTFS / exFAT / HPFS
/dev/sdb4 63 7,807,589 7,807,527 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 63 1,953,520,064 1,953,520,002 7 NTFS / exFAT / HPFS
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 2031 MB, 2031091712 bytes
63 heads, 62 sectors/track, 1015 cylinders, total 3966976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 62 3,964,589 3,964,528 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 22D566DF14FDDE4E ntfs Download
/dev/sdb1 faf298ae-7d84-481f-87db-df45341255b2 ext2 Sauvegarde
/dev/sdb3 5688BBDE88BBBAB7 ntfs Win7
/dev/sdb4 dcda273d-3c33-466f-ab8e-3e0166275ce8 swap
/dev/sdb5 cd6b494c-6cd4-414a-acd5-6c3e827853fe ext4 Kubuntu13.04
/dev/sdb6 7603d862-694b-45ce-852d-eb80ccfee07f ext4 Kubuntu13.10
/dev/sdc1 56DF90432C30ABCC ntfs 1TO
/dev/sdd1 2B0D-6553 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry "Kubuntu 13.04 GNU/Linux" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-34-generic
}
submenu "Options avancées pour Kubuntu 13.04 GNU/Linux"{
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-34-generic-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
echo 'Chargement de Linux 3.8.0-34-generic…'
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.8.0-34-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (mode de dépannage)" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-34-generic-recovery-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
echo 'Chargement de Linux 3.8.0-34-generic…'
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.8.0-34-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-31-generic-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
echo 'Chargement de Linux 3.8.0-31-generic…'
linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.8.0-31-generic
}
menuentry "Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (mode de dépannage)" --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-31-generic-recovery-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
echo 'Chargement de Linux 3.8.0-31-generic…'
linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.8.0-31-generic
}
}
### END /etc/grub.d/10_linux_proxy ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober_proxy ###
menuentry "Windows 7 (loader) (sur /dev/sdb3)" --class windows --class os $menuentry_id_option 'osprober-chain-5688BBDE88BBBAB7' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5688BBDE88BBBAB7
else
search --no-floppy --fs-uuid --set=root 5688BBDE88BBBAB7
fi
chainloader +1
}
menuentry "Ubuntu 10.04 LTS (10.04)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-63b776c0-e53e-4adb-9688-28f0baf92fa2' {
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 63b776c0-e53e-4adb-9688-28f0baf92fa2
else
search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
fi
linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro quiet splash
initrd /boot/initrd.img-2.6.32-54-generic
}
submenu "Options avancées pour Ubuntu 10.04 LTS (10.04)"{
menuentry "Ubuntu, with Linux 2.6.32-54-generic (sur /dev/sdb6)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-2.6.32-54-generic--63b776c0-e53e-4adb-9688-28f0baf92fa2' {
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 63b776c0-e53e-4adb-9688-28f0baf92fa2
else
search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
fi
linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro quiet splash
initrd /boot/initrd.img-2.6.32-54-generic
}
menuentry "Ubuntu, with Linux 2.6.32-54-generic (recovery mode) (sur /dev/sdb6)" --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-2.6.32-54-generic-root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro single-63b776c0-e53e-4adb-9688-28f0baf92fa2' {
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 63b776c0-e53e-4adb-9688-28f0baf92fa2
else
search --no-floppy --fs-uuid --set=root 63b776c0-e53e-4adb-9688-28f0baf92fa2
fi
linux /boot/vmlinuz-2.6.32-54-generic root=UUID=63b776c0-e53e-4adb-9688-28f0baf92fa2 ro single
initrd /boot/initrd.img-2.6.32-54-generic
}
}
### END /etc/grub.d/30_os-prober_proxy ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb3 during installation
UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=bd1b8fef-6fdf-46a6-b25e-b1b74223e5cf none swap sw 0 0
tmpfs /tmp tmpfs mode=1777 0 0--------------------------------------------------------------------------------
=================== sdb5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdb6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Kubuntu' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
linux /boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.11.0-14-generic
}
submenu 'Advanced options for Kubuntu' $menuentry_id_option 'gnulinux-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
menuentry 'Kubuntu, with Linux 3.11.0-14-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-14-generic-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
echo 'Loading Linux 3.11.0-14-generic ...'
linux /boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-14-generic
}
menuentry 'Kubuntu, with Linux 3.11.0-14-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-14-generic-recovery-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
echo 'Loading Linux 3.11.0-14-generic ...'
linux /boot/vmlinuz-3.11.0-14-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-14-generic
}
menuentry 'Kubuntu, with Linux 3.11.0-12-generic' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
echo 'Loading Linux 3.11.0-12-generic ...'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-12-generic
}
menuentry 'Kubuntu, with Linux 3.11.0-12-generic (recovery mode)' --class kubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-7603d862-694b-45ce-852d-eb80ccfee07f' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
echo 'Loading Linux 3.11.0-12-generic ...'
linux /boot/vmlinuz-3.11.0-12-generic root=UUID=7603d862-694b-45ce-852d-eb80ccfee07f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
linux16 /boot/memtest86+.bin
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos6 --hint-efi=hd1,msdos6 --hint-baremetal=ahci1,msdos6 7603d862-694b-45ce-852d-eb80ccfee07f
else
search --no-floppy --fs-uuid --set=root 7603d862-694b-45ce-852d-eb80ccfee07f
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sdb3)' --class windows --class os $menuentry_id_option 'osprober-chain-5688BBDE88BBBAB7' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5688BBDE88BBBAB7
else
search --no-floppy --fs-uuid --set=root 5688BBDE88BBBAB7
fi
chainloader +1
}
menuentry 'Ubuntu 13.04 (13.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-34-generic
}
submenu 'Advanced options for Ubuntu 13.04 (13.04)' $menuentry_id_option 'osprober-gnulinux-advanced-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
menuentry 'Kubuntu 13.04 GNU/Linux (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-34-generic
}
menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-34-generic
}
menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-34-generic (mode de dépannage) (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-34-generic-root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-34-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
initrd /boot/initrd.img-3.8.0-34-generic
}
menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-31-generic--cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-31-generic
}
menuentry 'Kubuntu GNU/Linux, avec Linux 3.8.0-31-generic (mode de dépannage) (on /dev/sdb5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-31-generic-root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset-cd6b494c-6cd4-414a-acd5-6c3e827853fe' {
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5 cd6b494c-6cd4-414a-acd5-6c3e827853fe
else
search --no-floppy --fs-uuid --set=root cd6b494c-6cd4-414a-acd5-6c3e827853fe
fi
linux /boot/vmlinuz-3.8.0-31-generic root=UUID=cd6b494c-6cd4-414a-acd5-6c3e827853fe ro recovery nomodeset
initrd /boot/initrd.img-3.8.0-31-generic
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb6 during installation
UUID=7603d862-694b-45ce-852d-eb80ccfee07f / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb4 during installation
UUID=dcda273d-3c33-466f-ab8e-3e0166275ce8 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
========================= sdd1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdd1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdd1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb2
00000000 42 98 82 bf 23 47 68 78 e2 63 2f e1 90 c8 59 4c |B...#Ghx.c/...YL|
00000010 67 6d 0e 96 b2 82 3c af 58 76 c2 89 98 b3 18 d7 |gm....<.Xv......|
00000020 b4 b8 02 83 84 b3 be 25 9b 53 16 fa df cb 98 a2 |.......%.S......|
00000030 3e 93 73 9e 70 9f bb c2 80 84 15 9e 24 8c d8 df |>.s.p.......$...|
00000040 25 36 4b 4c 79 5e 41 39 bb 8e 28 69 8b 9c a9 16 |%6KLy^A9..(i....|
00000050 a7 0c ae dc 9b 1d 4b 51 ce 59 6c ce 22 49 2a 6d |......KQ.Yl."I*m|
00000060 ed fa a1 d7 4a 47 f2 da 2f b2 87 98 8f ee 69 c7 |....JG../.....i.|
00000070 4d 2b 78 2c 16 57 00 95 e4 bd 11 60 49 5b ef 16 |M+x,.W.....`I[..|
00000080 34 14 12 31 7f 4c 64 85 f7 7c 6f 57 d8 e1 89 a0 |4..1.Ld..|oW....|
00000090 84 15 06 24 ed 3a 48 9a 50 24 95 cb 1d 76 73 0f |...$.:H.P$...vs.|
000000a0 ef 54 e8 0a 23 b6 ad 7d bd f2 b3 d0 a2 b7 90 10 |.T..#..}........|
000000b0 2e 74 a8 f3 84 95 b7 fe 35 4b e6 3d 59 cc f9 84 |.t......5K.=Y...|
000000c0 b0 27 8e fd 52 68 19 5d 68 e1 5b 90 0d 9b 23 2a |.'..Rh.]h.[...#*|
000000d0 93 9a d4 e4 ee 3c 44 e2 12 97 38 bb 51 61 f1 5c |.....<D...8.Qa.\|
000000e0 81 82 bf 27 ff b1 00 67 3f 85 e4 9f 11 6a fb 11 |...'...g?....j..|
000000f0 c3 bb 04 5b 36 57 30 58 68 01 be 57 01 fe c7 af |...[6W0Xh..W....|
00000100 77 09 e2 bd d7 67 24 6f 3c f9 0f 09 8c 0a d7 05 |w....g$o<.......|
00000110 44 79 8e 38 f6 ce 96 7e bf fd f7 0a 1d 39 73 4a |Dy.8...~.....9sJ|
00000120 67 9b f7 ed 17 e5 57 a8 10 f6 ed 54 e8 d4 58 b8 |g.....W....T..X.|
00000130 bd 42 62 f2 cf 88 d6 ff be 84 f1 5f 25 68 f7 23 |.Bb........_%h.#|
00000140 4c 0b 05 6d fb 11 a3 be 1f 67 f3 0a 04 22 7f 4e |L..m.....g...".N|
00000150 04 ff 4e 60 56 d8 3f 7d 24 9f b7 98 1e d6 61 1d |..N`V.?}$.....a.|
00000160 06 09 4b 58 c2 7f 50 10 b1 df 7e fe 99 a5 f6 5f |..KX..P...~...._|
00000170 25 80 7f 11 c3 ff 69 09 e0 07 e6 f3 3b a1 bd da |%.....i.....;...|
00000180 0b 32 19 ea 63 12 f4 1c 63 dc 06 ad d7 97 7a d6 |.2..c...c.....z.|
00000190 29 84 25 eb 2c a1 43 4d 10 7a 1f 7a 7f e0 31 fc |).%.,.CM.z.z..1.|
000001a0 fc 9f 06 75 c1 37 f8 d1 f2 e3 7f 91 e9 81 a0 3e |...u.7.........>|
000001b0 f8 d7 41 00 fa 81 49 7b 5a ba 24 0d 20 22 00 fe |..A...I{Z.$. "..|
000001c0 ff ff 83 fe ff ff 02 00 00 00 2c b6 d3 0a 00 fe |..........,.....|
000001d0 ff ff 05 fe ff ff 2e b6 d3 0a 8c 46 20 0d 00 00 |...........F ...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-6GqZ2KEs/Tmp_Log: No such file or directory
File descriptor 7 (/proc/7425/mounts) leaked on lvscan invocation. Parent PID 27138: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-12-23__20h31 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 13.10, saucy, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sdb3:Windows 7 (loader):Windows:chain
/dev/sdb5:Ubuntu 13.04 (13.04):Ubuntu:linux
/dev/sdb6:Ubuntu 13.10 (13.10):Ubuntu1:linux
=================== blkid:
/dev/sda1: LABEL="Download" UUID="22D566DF14FDDE4E" TYPE="ntfs"
/dev/sdb1: LABEL="Sauvegarde" UUID="faf298ae-7d84-481f-87db-df45341255b2" TYPE="ext2"
/dev/sdb3: LABEL="Win7" UUID="5688BBDE88BBBAB7" TYPE="ntfs"
/dev/sdb5: LABEL="Kubuntu13.04" UUID="cd6b494c-6cd4-414a-acd5-6c3e827853fe" TYPE="ext4"
/dev/sdb6: LABEL="Kubuntu13.10" UUID="7603d862-694b-45ce-852d-eb80ccfee07f" TYPE="ext4"
/dev/sdc1: LABEL="1TO" UUID="56DF90432C30ABCC" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"
/dev/sdb4: UUID="dcda273d-3c33-466f-ab8e-3e0166275ce8" TYPE="swap"
/dev/sdd1: UUID="2B0D-6553" TYPE="vfat"
1 disks with OS, 3 OS : 2 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sdb5/etc/grub.d/ :
drwxr-xr-x 5 1000 1000 4096 déc. 20 16:00 grub.d
total 68
-rwxr-xr-x 1 1000 1000 7541 avril 9 2013 00_header
-rwxr-xr-x 1 1000 1000 5974 avril 9 2013 05_debian_theme
-rwxr-xr-x 1 1000 1000 868 déc. 20 16:00 10_linux_proxy
-rwxr-xr-x 1 1000 1000 10258 avril 9 2013 20_linux_xen
-rwxr-xr-x 1 1000 1000 1688 déc. 5 2012 20_memtest86+
-rwxr-xr-x 1 1000 1000 1542 déc. 20 16:00 30_os-prober_proxy
-rwxr-xr-x 1 1000 1000 1426 avril 9 2013 30_uefi-firmware
-rwxr-xr-x 1 1000 1000 214 avril 9 2013 40_custom
-rwxr-xr-x 1 1000 1000 216 avril 9 2013 41_custom
drwxr-xr-x 4 1000 1000 4096 déc. 20 15:59 backup
drwxr-xr-x 2 1000 1000 4096 déc. 20 15:59 bin
drwxr-xr-x 2 1000 1000 4096 déc. 20 16:00 proxifiedScripts
-rw-r--r-- 1 1000 1000 483 avril 9 2013 README
=================== sdb5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc. 21 19:22 grub.d
total 72
-rwxr-xr-x 1 root root 7850 oct. 10 17:53 00_header
-rwxr-xr-x 1 root root 5949 août 15 08:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct. 10 17:53 10_linux
-rwxr-xr-x 1 root root 10258 oct. 10 17:53 20_linux_xen
-rwxr-xr-x 1 root root 1798 juin 17 2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct. 10 17:53 30_os-prober
-rwxr-xr-x 1 root root 1426 oct. 10 17:53 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 10 17:53 40_custom
-rwxr-xr-x 1 root root 216 oct. 10 17:53 41_custom
-rw-r--r-- 1 root root 483 oct. 10 17:53 README
=================== sdb6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sdb1 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb3.
sdb5 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, customized, farbios, /mnt/boot-sav/sdb5.
sdb6 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb6.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdc1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA SAMSUNG HD300LD (scsi)
Disk /dev/sda: 300GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 300GB 300GB primary ntfs boot
Model: ATA WDC WD5000AADS-0 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
4 32.3kB 3997MB 3997MB primary linux-swap(v1)
1 3997MB 37.3GB 33.3GB primary ext2
2 37.3GB 243GB 206GB extended lba
5 37.3GB 130GB 93.0GB logical ext4
6 130GB 243GB 113GB logical ext4
3 243GB 500GB 257GB primary ntfs boot
Model: ATA WDC WD10EARS-00Y (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 1000GB 1000GB primary ntfs boot
Model: USB Flash Memory (scsi)
Disk /dev/sdd: 2031MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 2030MB 2030MB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:300GB:scsi:512:512:msdos:ATA SAMSUNG HD300LD;
1:1049kB:300GB:300GB:ntfs::boot;
BYT;
/dev/sdb:500GB:scsi:512:512:msdos:ATA WDC WD5000AADS-0;
4:32.3kB:3997MB:3997MB:linux-swap(v1)::;
1:3997MB:37.3GB:33.3GB:ext2::;
2:37.3GB:243GB:206GB:::lba;
5:37.3GB:130GB:93.0GB:ext4::;
6:130GB:243GB:113GB:ext4::;
3:243GB:500GB:257GB:ntfs::boot;
BYT;
/dev/sdc:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-00Y;
1:32.3kB:1000GB:1000GB:ntfs::boot;
BYT;
/dev/sdd:2031MB:scsi:512:512:msdos: USB Flash Memory;
1:31.7kB:2030MB:2030MB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdd1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext2 (rw)
/dev/sdb3 on /mnt/boot-sav/sdb3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb5 on /mnt/boot-sav/sdb5 type ext4 (rw)
/dev/sdb6 on /mnt/boot-sav/sdb6 type ext4 (rw)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdc sdc1 sdd sdd1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 f8 b7 ee 22 00 00 00 00 |..........."....|
00000030 04 00 00 00 00 00 00 00 ff fd 3e 00 00 00 00 00 |..........>.....|
00000040 f6 00 00 00 01 00 00 00 4e de fd 14 df 66 d5 22 |........N....f."|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 2d 6b 4b 1c |........?...-kK.|
00000020 00 00 00 00 80 00 80 00 13 e1 ec 1d 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b7 ba bb 88 de bb 88 56 |...............V|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 81 59 70 74 00 00 00 00 |.........Ypt....|
00000030 04 00 00 00 00 00 00 00 98 05 47 07 00 00 00 00 |..........G.....|
00000040 f6 00 00 00 01 00 00 00 cc ab 30 2c 43 90 df 56 |..........0,C..V|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.0G 572M 1.5G 29% /
udev devtmpfs 2.0G 12K 2.0G 1% /dev
tmpfs tmpfs 404M 1.2M 403M 1% /run
/dev/sdd1 vfat 1.9G 1006M 927M 53% /cdrom
/dev/loop0 squashfs 958M 958M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 52K 2.0G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 2.0G 80K 2.0G 1% /run/shm
none tmpfs 100M 20K 100M 1% /run/user
/dev/sda1 fuseblk 280G 149G 131G 54% /mnt/boot-sav/sda1
/dev/sdb1 ext2 31G 8.3G 21G 29% /mnt/boot-sav/sdb1
/dev/sdb3 fuseblk 240G 178G 63G 75% /mnt/boot-sav/sdb3
/dev/sdb5 ext4 86G 12G 70G 15% /mnt/boot-sav/sdb5
/dev/sdb6 ext4 104G 7.3G 91G 8% /mnt/boot-sav/sdb6
/dev/sdc1 fuseblk 932G 750G 183G 81% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/sda: 300.1 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders, total 586072368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5ecbb65c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 586072063 293035008 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00077d9d
Device Boot Start End Blocks Id System
/dev/sdb1 7807590 72822644 32507527+ 83 Linux
/dev/sdb2 72822706 474688619 200932957 f W95 Ext'd (LBA)
/dev/sdb3 * 474704685 976768064 251031690 7 HPFS/NTFS/exFAT
/dev/sdb4 63 7807589 3903763+ 82 Linux swap / Solaris
/dev/sdb5 72822708 254469599 90823446 83 Linux
/dev/sdb6 254469663 474688619 110109478+ 83 Linux
Partition table entries are not in disk order
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a4b79
Device Boot Start End Blocks Id System
/dev/sdc1 * 63 1953520064 976760001 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 2031 MB, 2031091712 bytes
63 heads, 62 sectors/track, 1015 cylinders, total 3966976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e6f3e
Device Boot Start End Blocks Id System
/dev/sdd1 * 62 3964589 1982264 c W95 FAT32 (LBA)
Warning: unknown mime-type for "/mnt/boot-sav/sdb6/etc/default/grub" -- using "application/octet-stream"
Error: no "view" mailcap rules found for type "application/octet-stream"
WARNING: You don't seem to have any mimeinfo.cache files.
Try running the update-desktop-database command. If you
don't have this command you should install the
desktop-file-utils package. This package is available from
http://freedesktop.org/wiki/Software_2fdesktop_2dfile_2dutils
Can't call method "get_value" on an undefined value at /usr/bin/mimeopen line 162.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(15049) KConfigGroup::readXdgListEntry: List entry Keywords in "k3bsetup.desktop" is not compliant with XDG standard (missing trailing semicolon).
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 110: " Invalid entry (missing '=')
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 111: " Invalid entry (empty key)
"KConfigIni: In file /usr/share/kde4/services/muon-knsplasmoids-backend.desktop, line 112: " Invalid entry (missing '=')
kbuildsycoca4(15049) KConfigGroup::readXdgListEntry: List entry Categories in "/usr/share/applications/im-config.desktop" is not compliant with XDG standard (missing trailing semicolon).
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QObject::connect: Cannot connect (null)::resourceScoreUpdated(QString, QString, QString, double) to NepomukPlugin::resourceScoreUpdated(QString, QString, QString, double)
QObject::connect: Cannot connect (null)::recentStatsDeleted(QString, int, QString) to NepomukPlugin::deleteRecentStats(QString, int, QString)
QObject::connect: Cannot connect (null)::earlierStatsDeleted(QString, int) to NepomukPlugin::deleteEarlierStats(QString, int)
kactivitymanagerd(15117)/nepomuk (library): Could not find virtuoso to connect to. Aborting
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
QFileSystemWatcher: failed to add paths: /root/.config/ibus/bus
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
QFileSystemWatcher: failed to add paths: /root/.kde/share/config/activitymanager-pluginsrc
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sdb6 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Custom-Repair
This setting will reinstall the grub2 of sdb6 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sdb6 into all MBRs of disks with OS or not-USB
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdb6 into the MBR of sda
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdb6 into the MBR of sdc
Installation finished. No error reported.
grub-install /dev/sdc: exit code of grub-install /dev/sdc:0
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830] [1002:944c]
Subsystem: CardExpert Technology Device [10b0:0401]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870] [1002:aa30]
*******
grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.
Reinstall the GRUB of sdb6 into the MBR of sdb
Installation finished. No error reported.
grub-install /dev/sdb: exit code of grub-install /dev/sdb:0
chroot /mnt/boot-sav/sdb6 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.11.0-14-generic
Found initrd image: /boot/initrd.img-3.11.0-14-generic
Found linux image: /boot/vmlinuz-3.11.0-12-generic
Found initrd image: /boot/initrd.img-3.11.0-12-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sdb3
Found Ubuntu 13.04 (13.04) on /dev/sdb5
Unhide GRUB boot menu in sdb6/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
Please do not forget to make your BIOS boot on sdb (500GB) disk!
A première vue, on dirait que ça baigne y compris pour démarrer Windows mais il faut voir un peu plus loin.
Déjà, est-ce que tu peux confirmer que par défaut ton ordi démarre bien sur Ubuntu 13.10 ? D'autre part, tu dis que que windows ne démarre plus mais il faut être plus précis : qu'est-ce qui se passe sur l'écran quand tu sélectionnes "Windows 7 (loader) (on /dev/sdb3" dans le menu Grub ? Prends une photo si c'est trop compliqué à expliquer ou note l'erreur affichée si tu as un message qui indique l'erreur à l'écran.
Sinon, ce que tu as indiqué comme solution dans ton post #1 est correct :
Alors j'ai vu que je pouvais tenter de réparer windows depuis le cd windows, puis de réinstaller le grub pour reprendre la main sur le démarrage
Et pour ce qui est de réparer Windows 7, si tu n'as pas ce qu'il faut, je te recommande la solution épatante indiquée là qui est "depuis un autre PC équipé de Win7". Je précise que ce dernier lien s'applique même si tu fais le disque de réparation depuis un autre ordi que le tien, pourvu qu'il soit équipé comme le tien de Win7.
Dernière modification par malbo (Le 24/12/2013, à 10:24)
Hors ligne
#4 Le 24/12/2013, à 17:15
- fruity101079
Re : [Résolu] MBR windows n'existe plus.
Finalement, j'ai démarré sur le cd Windows et réparer comme indiqué dans la doc. Et ça marche niquel. Même pas besoin de réinstaller grub !
Merci à tous.
Ubuntu 14.04
Kubuntu 14.10
Hors ligne
Pages : 1