Pages : 1
#1 Le 05/01/2014, à 20:21
- cdjklm
demarage xubuntu 1mn30
voila je trouve que le demarage de mon benq dont les spesifications sont afficher en dessous a part 5400tr/mn pour la vitesse du disque dur es tres lent alors qu avec le system d origine un linpus lite base sur fedora 8 se faisait en 30 s je poste les retours de la commande
dmesgcdela devrait aider.
cdjkllm@cdjkllm:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-58-generic-pae (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 18:00:02 UTC 2013 (Ubuntu 3.2.0-58.88-generic-pae 3.2.53)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: BenQ Joybook Lite U101/Joybook Lite U101, BIOS 1.07 04/23/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 2039M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00f7c40] f7c40
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1e3f000-2000000
[ 0.000000] RAMDISK: 35948000 - 36c9c000
[ 0.000000] ACPI: RSDP 000f7c10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f6db699 00074 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6e1d7a 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6dd225 04AE1 (v01 BenQ CALISTGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7f6e2fc0 00040
[ 0.000000] ACPI: APIC 7f6e1e6e 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7f6e1ed6 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6e1f0e 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 7f6e1f4a 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 7f6e1f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6e1fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6dcbd6 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6dc544 00692 (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6db70d 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1146MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] free_area_init_node: node 0, pgdat c1871a00, node_mem_map f4958200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2294 pages used for memmap
[ 0.000000] HighMem zone: 291292 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-58-generic-pae root=UUID=23eb16f8-3469-4765-8472-1b3106720de5 ro quiet splash acpi_osi=Linux vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8350720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f6d0)
[ 0.000000] Memory: 2029936k/2087744k available (5841k kernel code, 57356k reserved, 2858k data, 744k init, 1174344k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1880000 - 0xc193a000 ( 744 kB)
[ 0.000000] .data : 0xc15b473c - 0xc187f200 (2858 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b473c (5841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.491 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.98 BogoMIPS (lpj=6649964)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004069] Security Framework initialized
[ 0.004110] AppArmor: AppArmor initialized
[ 0.004114] Yama: becoming mindful.
[ 0.004240] Mount-cache hash table entries: 512
[ 0.004510] Initializing cgroup subsys cpuacct
[ 0.004525] Initializing cgroup subsys memory
[ 0.004544] Initializing cgroup subsys devices
[ 0.004550] Initializing cgroup subsys freezer
[ 0.004556] Initializing cgroup subsys blkio
[ 0.004571] Initializing cgroup subsys perf_event
[ 0.004616] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004627] CPU: Physical Processor ID: 0
[ 0.004632] CPU: Processor Core ID: 0
[ 0.004639] mce: CPU supports 5 MCE banks
[ 0.004652] CPU0: Thermal monitoring enabled (TM1)
[ 0.004661] using mwait in idle threads.
[ 0.009921] ACPI: Core revision 20110623
[ 0.020062] ftrace: allocating 26146 entries in 52 pages
[ 0.024111] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028498] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068208] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.072003] ... version: 3
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] CPU 1 irqstacks, hard=f44ea000 soft=f44ec000
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.072003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.160076] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160169] Brought up 2 CPUs
[ 0.160178] Total of 2 processors activated (6649.89 BogoMIPS).
[ 0.160773] devtmpfs: initialized
[ 0.160773] EVM: security.selinux
[ 0.160773] EVM: security.SMACK64
[ 0.160773] EVM: security.capability
[ 0.160773] PM: Registering ACPI NVS region at 7f6e2000 (4096 bytes)
[ 0.164677] print_constraints: dummy:
[ 0.164737] RTC time: 19:13:13, date: 01/05/14
[ 0.164831] NET: Registered protocol family 16
[ 0.165007] Trying to unpack rootfs image as initramfs...
[ 0.165379] EISA bus registered
[ 0.165428] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.165438] ACPI: bus type pci registered
[ 0.165659] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165672] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165678] PCI: Using MMCONFIG for extended config space
[ 0.165686] PCI: Using configuration type 1 for base access
[ 0.180522] bio: create slab <bio-0> at 0
[ 0.180637] ACPI: Added _OSI(Module Device)
[ 0.180647] ACPI: Added _OSI(Processor Device)
[ 0.180655] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180663] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180670] ACPI: Added _OSI(Linux)
[ 0.183576] ACPI: EC: Look up EC in DSDT
[ 0.189407] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.192928] ACPI: SSDT 7f6dc26d 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.193689] ACPI: Dynamic OEM Table Load:
[ 0.193701] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.194183] ACPI: SSDT 7f6dbc03 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.194884] ACPI: Dynamic OEM Table Load:
[ 0.194895] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.195754] ACPI: SSDT 7f6dc470 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.196507] ACPI: Dynamic OEM Table Load:
[ 0.196522] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.196883] ACPI: SSDT 7f6dc1e8 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.197590] ACPI: Dynamic OEM Table Load:
[ 0.197602] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.198751] ACPI: Interpreter enabled
[ 0.198751] ACPI: (supports S0 S3 S4 S5)
[ 0.198751] ACPI: Using IOAPIC for interrupt routing
[ 0.212211] ACPI: Power Resource [QFAN] (off)
[ 0.213076] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.213532] ACPI: No dock devices found.
[ 0.213542] HEST: Table not found.
[ 0.213556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.214705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216979] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.216992] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.217002] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.217013] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.217022] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.217032] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.217043] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.217086] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.217177] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.217200] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[ 0.217215] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.217230] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.217245] pci 0000:00:02.0: reg 1c: [mem 0xf0200000-0xf023ffff]
[ 0.217320] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.217340] pci 0000:00:02.1: reg 10: [mem 0xf0080000-0xf00fffff]
[ 0.217502] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.217540] pci 0000:00:1b.0: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.217682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.217695] pci 0000:00:1b.0: PME# disabled
[ 0.217747] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.217897] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.217909] pci 0000:00:1c.0: PME# disabled
[ 0.217967] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.218115] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.218127] pci 0000:00:1c.2: PME# disabled
[ 0.218185] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.218265] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.218342] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.218425] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.218497] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.218576] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.218647] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.218726] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.218812] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.218850] pci 0000:00:1d.7: reg 10: [mem 0xf0444000-0xf04443ff]
[ 0.218989] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219002] pci 0000:00:1d.7: PME# disabled
[ 0.219044] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.219185] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.219324] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.219339] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.219351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.219363] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.219377] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.219470] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.219504] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.219526] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.219546] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.219566] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.219588] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.219665] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.219676] pci 0000:00:1f.2: PME# disabled
[ 0.219711] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.219798] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df]
[ 0.219985] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.220042] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.220095] pci 0000:02:00.0: reg 18: [mem 0xf0510000-0xf0510fff 64bit pref]
[ 0.220134] pci 0000:02:00.0: reg 20: [mem 0xf0500000-0xf050ffff 64bit pref]
[ 0.220165] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.220279] pci 0000:02:00.0: supports D1 D2
[ 0.220288] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220301] pci 0000:02:00.0: PME# disabled
[ 0.228095] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.228113] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.228134] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.228272] pci 0000:03:00.0: [168c:001c] type 0 class 0x000200
[ 0.228324] pci 0000:03:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
[ 0.236096] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.236118] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.236252] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.236279] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.236288] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.236298] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.236308] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.236320] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.236331] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.236343] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.236383] pci_bus 0000:00: on NUMA node 0
[ 0.236401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.236969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.237176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.237443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.237622] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.237636] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.237644] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.249530] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.249736] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.249917] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.250096] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.250277] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.250476] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.250661] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.250843] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.251336] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.251369] vgaarb: loaded
[ 0.251376] vgaarb: bridge control possible 0000:00:02.0
[ 0.251925] i2c-core: driver [aat2870] using legacy suspend method
[ 0.251933] i2c-core: driver [aat2870] using legacy resume method
[ 0.252256] SCSI subsystem initialized
[ 0.252460] libata version 3.00 loaded.
[ 0.252662] usbcore: registered new interface driver usbfs
[ 0.252714] usbcore: registered new interface driver hub
[ 0.252833] usbcore: registered new device driver usb
[ 0.253262] PCI: Using ACPI for IRQ routing
[ 0.265228] PCI: pci_cache_line_size set to 64 bytes
[ 0.265387] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.265399] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.265807] NetLabel: Initializing
[ 0.265815] NetLabel: domain hash size = 128
[ 0.265820] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.265854] NetLabel: unlabeled traffic allowed by default
[ 0.266105] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.266121] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.266137] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.276214] Switching to clocksource hpet
[ 0.300770] AppArmor: AppArmor Filesystem Enabled
[ 0.300855] pnp: PnP ACPI init
[ 0.300908] ACPI: bus type pnp registered
[ 0.302584] pnp 00:00: [bus 00-ff]
[ 0.302596] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.302605] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.302613] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.302622] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.302631] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.302640] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.302648] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.302657] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.302666] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.302675] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.302684] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.302693] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.302702] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.302712] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.302721] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.302730] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.302739] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.302749] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.302758] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.303044] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.303153] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.303163] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.303171] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.303179] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.303188] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.303196] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.303204] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.303212] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.303377] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.303389] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.303400] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.303411] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.303421] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303432] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.303443] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.303454] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.303466] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.304145] pnp 00:02: [io 0x0000-0x001f]
[ 0.304155] pnp 00:02: [io 0x0081-0x0091]
[ 0.304164] pnp 00:02: [io 0x0093-0x009f]
[ 0.304172] pnp 00:02: [io 0x00c0-0x00df]
[ 0.304181] pnp 00:02: [dma 4]
[ 0.304331] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.304370] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.304512] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.304756] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.304938] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.304953] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.304997] pnp 00:05: [io 0x00f0]
[ 0.305022] pnp 00:05: [irq 13]
[ 0.305146] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.305192] pnp 00:06: [io 0x002e-0x002f]
[ 0.305201] pnp 00:06: [io 0x0061]
[ 0.305208] pnp 00:06: [io 0x0063]
[ 0.305215] pnp 00:06: [io 0x0065]
[ 0.305222] pnp 00:06: [io 0x0067]
[ 0.305229] pnp 00:06: [io 0x0068]
[ 0.305236] pnp 00:06: [io 0x006c]
[ 0.305243] pnp 00:06: [io 0x0070]
[ 0.305250] pnp 00:06: [io 0x0080]
[ 0.305257] pnp 00:06: [io 0x0092]
[ 0.305264] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.305273] pnp 00:06: [io 0x0680-0x069f]
[ 0.305281] pnp 00:06: [io 0x0800-0x080f]
[ 0.305289] pnp 00:06: [io 0x1000-0x107f]
[ 0.305296] pnp 00:06: [io 0x1180-0x11bf]
[ 0.305312] pnp 00:06: [io 0x1640-0x164f]
[ 0.305534] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.305546] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.305556] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.305565] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.305574] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.305586] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305690] pnp 00:07: [io 0x06a0-0x06af]
[ 0.305699] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.305875] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.305887] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.305898] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305936] pnp 00:08: [io 0x0070-0x0077]
[ 0.305958] pnp 00:08: [irq 8]
[ 0.306094] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.306147] pnp 00:09: [io 0x0060]
[ 0.306155] pnp 00:09: [io 0x0064]
[ 0.306171] pnp 00:09: [irq 1]
[ 0.306300] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.306344] pnp 00:0a: [irq 12]
[ 0.306481] pnp 00:0a: Plug and Play ACPI device, IDs SYN1027 SYN1000 SYN0002 PNP0f13 (active)
[ 0.306593] pnp: PnP ACPI: found 11 devices
[ 0.306602] ACPI: ACPI bus type pnp unregistered
[ 0.306612] PnPBIOS: Disabled by ACPI PNP
[ 0.349059] PCI: max bus depth: 1 pci_try_num: 2
[ 0.349143] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x800fffff]
[ 0.349161] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 0.349178] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.349194] pci 0000:00:1c.0: BAR 14: reassigned [mem 0x80300000-0x807fffff]
[ 0.349207] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0520000-0xf053ffff pref]
[ 0.349217] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.349228] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.349242] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x807fffff]
[ 0.349255] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.349272] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.349283] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.349297] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.349310] pci 0000:00:1c.2: bridge window [mem 0x80100000-0x802fffff 64bit pref]
[ 0.349327] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.349396] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.349411] pci 0000:00:1c.0: setting latency timer to 64
[ 0.349442] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.349455] pci 0000:00:1c.2: setting latency timer to 64
[ 0.349473] pci 0000:00:1e.0: setting latency timer to 64
[ 0.349485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.349494] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.349503] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349512] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.349522] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.349531] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.349540] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.349549] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.349558] pci_bus 0000:02: resource 1 [mem 0x80300000-0x807fffff]
[ 0.349568] pci_bus 0000:02: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.349578] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.349587] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.349596] pci_bus 0000:03: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[ 0.349606] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.349615] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.349624] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349633] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.349642] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.349651] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.349661] pci_bus 0000:0a: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.349787] NET: Registered protocol family 2
[ 0.349990] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.350896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.352104] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352616] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.352629] TCP reno registered
[ 0.352646] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.352670] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.352937] NET: Registered protocol family 1
[ 0.352990] pci 0000:00:02.0: Boot video device
[ 0.353068] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.353100] pci 0000:00:1d.0: PCI INT A disabled
[ 0.353147] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.353178] pci 0000:00:1d.1: PCI INT B disabled
[ 0.353205] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.353236] pci 0000:00:1d.2: PCI INT C disabled
[ 0.353276] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.353308] pci 0000:00:1d.3: PCI INT D disabled
[ 0.353336] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.353401] pci 0000:00:1d.7: PCI INT A disabled
[ 0.353444] PCI: CLS 64 bytes, default 64
[ 0.353458] Simple Boot Flag at 0x36 set to 0x1
[ 0.354657] audit: initializing netlink socket (disabled)
[ 0.354686] type=2000 audit(1388949193.352:1): initialized
[ 0.415221] highmem bounce pool size: 64 pages
[ 0.415239] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.422181] VFS: Disk quotas dquot_6.5.2
[ 0.422416] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.424565] fuse init (API version 7.17)
[ 0.424936] msgmni has been set to 1671
[ 0.426189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.426303] io scheduler noop registered
[ 0.426311] io scheduler deadline registered
[ 0.426342] io scheduler cfq registered (default)
[ 0.426709] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.426806] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.426977] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.427061] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.427350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.427444] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.427699] intel_idle: MWAIT substates: 0x20220
[ 0.427718] intel_idle: v0.4 model 0x1C
[ 0.427724] intel_idle: lapic_timer_reliable_states 0x2
[ 0.427732] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.427960] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.428248] ACPI: AC Adapter [ACAD] (off-line)
[ 0.428510] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.429153] ACPI: Lid Switch [LID0]
[ 0.429335] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.429353] ACPI: Power Button [PWRB]
[ 0.429548] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C0E:00/input/input2
[ 0.429563] ACPI: Sleep Button [SLPB]
[ 0.429731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.429743] ACPI: Power Button [PWRF]
[ 0.429973] ACPI: Fan [FAN] (off)
[ 0.435058] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.435069] ACPI: Thermal Zone [THRM] (39 C)
[ 0.435159] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.435190] ACPI: Battery Slot [BAT1] (battery present)
[ 0.435303] ERST: Table is not found!
[ 0.435309] GHES: HEST is not enabled!
[ 0.435573] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.436257] isapnp: Scanning for PnP cards...
[ 0.672118] ACPI: Battery Slot [BAT1] (battery present)
[ 0.791856] isapnp: No Plug & Play device found
[ 1.227767] Freeing initrd memory: 19792k freed
[ 1.269295] Linux agpgart interface v0.103
[ 1.269454] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.269634] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.269820] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.270076] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.274367] brd: module loaded
[ 1.276675] loop: module loaded
[ 1.277158] ata_piix 0000:00:1f.2: version 2.13
[ 1.277192] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.277204] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.432050] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.432842] scsi0 : ata_piix
[ 1.433078] scsi1 : ata_piix
[ 1.434535] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.434543] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.435741] Fixed MDIO Bus: probed
[ 1.435806] tun: Universal TUN/TAP device driver, 1.6
[ 1.435811] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.435990] PPP generic driver version 2.4.2
[ 1.436329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.436378] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436419] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.436427] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.436573] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.436613] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.436633] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.440531] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.440576] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 1.456037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.456408] hub 1-0:1.0: USB hub found
[ 1.456421] hub 1-0:1.0: 8 ports detected
[ 1.456608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.456649] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.456703] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.456721] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.456728] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.456874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.456919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.457270] hub 2-0:1.0: USB hub found
[ 1.457282] hub 2-0:1.0: 2 ports detected
[ 1.457429] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.457447] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.457454] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.457594] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.457656] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.458019] hub 3-0:1.0: USB hub found
[ 1.458031] hub 3-0:1.0: 2 ports detected
[ 1.458176] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.458194] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.458202] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.458331] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.458395] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.458747] hub 4-0:1.0: USB hub found
[ 1.458759] hub 4-0:1.0: 2 ports detected
[ 1.458904] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.458922] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.458929] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.459062] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.459120] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.459482] hub 5-0:1.0: USB hub found
[ 1.459494] hub 5-0:1.0: 2 ports detected
[ 1.459785] usbcore: registered new interface driver libusual
[ 1.459901] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.465255] i8042: Detected active multiplexing controller, rev 1.1
[ 1.466878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.466896] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.466979] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.467054] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.467132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.467520] mousedev: PS/2 mouse device common for all mice
[ 1.468183] rtc_cmos 00:08: RTC can wake from S4
[ 1.468421] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.468471] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.468618] device-mapper: uevent: version 1.0.3
[ 1.468832] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.468892] EISA: Probing bus 0 at eisa.0
[ 1.468899] EISA: Cannot allocate resource for mainboard
[ 1.468906] Cannot allocate resource for EISA slot 1
[ 1.468911] Cannot allocate resource for EISA slot 2
[ 1.468917] Cannot allocate resource for EISA slot 3
[ 1.468922] Cannot allocate resource for EISA slot 4
[ 1.468928] Cannot allocate resource for EISA slot 5
[ 1.468933] Cannot allocate resource for EISA slot 6
[ 1.468939] Cannot allocate resource for EISA slot 7
[ 1.468944] Cannot allocate resource for EISA slot 8
[ 1.468949] EISA: Detected 0 cards.
[ 1.468971] cpufreq-nforce2: No nForce2 chipset.
[ 1.469153] cpuidle: using governor ladder
[ 1.469450] cpuidle: using governor menu
[ 1.469456] EFI Variables Facility v0.08 2004-May-17
[ 1.470037] TCP cubic registered
[ 1.470356] NET: Registered protocol family 10
[ 1.471679] NET: Registered protocol family 17
[ 1.471692] Registering the dns_resolver key type
[ 1.471745] Using IPI No-Shortcut mode
[ 1.472192] PM: Hibernation image not present or could not be loaded.
[ 1.472220] registered taskstats version 1
[ 1.491087] Magic number: 14:526:242
[ 1.491253] rtc_cmos 00:08: setting system clock to 2014-01-05 19:13:14 UTC (1388949194)
[ 1.492314] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.492321] EDD information not available.
[ 1.508738] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.596519] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001A, max UDMA/100
[ 1.596529] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.604552] ata1.00: configured for UDMA/100
[ 1.604912] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.605289] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.605395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.605532] sd 0:0:0:0: [sda] Write Protect is off
[ 1.605544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.605657] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.667733] sda: sda1 sda2 < sda5 >
[ 1.668813] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.668944] Freeing unused kernel memory: 744k freed
[ 1.669668] Write protecting the kernel text: 5844k
[ 1.669806] Write protecting the kernel read-only data: 2388k
[ 1.669813] NX-protecting the kernel data: 4396k
[ 1.718481] udevd[89]: starting version 175
[ 1.877909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.880093] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 1.883222] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.921405] [drm] Initialized drm 1.1.0 20060810
[ 1.934771] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.934839] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.934906] r8169 0000:02:00.0: setting latency timer to 64
[ 1.935021] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.954288] r8169 0000:02:00.0: eth0: RTL8102e at 0xf8410000, 00:23:8b:ed:34:9f, XID 04a00000 IRQ 42
[ 2.017530] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.017547] i915 0000:00:02.0: setting latency timer to 64
[ 2.100287] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.100298] [drm] Driver supports precise vblank timestamp query.
[ 2.129402] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.186530] fixme: max PWM is zero.
[ 2.296097] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[ 2.443813] [drm] initialized overlay support
[ 2.461501] fbcon: inteldrmfb (fb0) is primary device
[ 2.461656] Console: switching to colour frame buffer device 128x36
[ 2.461733] fb0: inteldrmfb frame buffer device
[ 2.461740] drm: registered panic notifier
[ 2.461783] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.429647] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.140118] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 6.548119] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 25.654906] Initializing USB Mass Storage driver...
[ 25.655141] usbcore: registered new interface driver usb-storage
[ 25.655146] USB Mass Storage support registered.
[ 26.086781] Adding 2085884k swap on /dev/sda5. Priority:-1 extents:1 across:2085884k
[ 26.116052] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.158287] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 26.230772] udevd[363]: starting version 175
[ 26.499608] lp: driver loaded but no devices found
[ 26.624987] cfg80211: Calling CRDA to update world regulatory domain
[ 26.792421] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.792448] ath5k 0000:03:00.0: setting latency timer to 64
[ 26.792567] ath5k 0000:03:00.0: registered as 'phy0'
[ 27.103902] type=1400 audit(1388945620.108:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
[ 27.108425] type=1400 audit(1388945620.116:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
[ 27.109201] type=1400 audit(1388945620.116:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
[ 27.303486] ath: EEPROM regdomain: 0x65
[ 27.303497] ath: EEPROM indicates we should expect a direct regpair map
[ 27.303508] ath: Country alpha2 being used: 00
[ 27.303514] ath: Regpair used: 0x65
[ 27.303524] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303535] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303544] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303555] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303564] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303582] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303593] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303602] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303614] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303623] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303634] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303643] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303654] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303663] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303674] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303683] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303694] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303703] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303723] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303734] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303744] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303755] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303764] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 27.303775] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 27.303784] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 27.303938] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 27.472691] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 27.474841] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 28.008088] ppdev: user-space parallel port driver
[ 28.136161] Bluetooth: Core ver 2.16
[ 28.136255] NET: Registered protocol family 31
[ 28.136263] Bluetooth: HCI device and connection manager initialized
[ 28.136272] Bluetooth: HCI socket layer initialized
[ 28.136279] Bluetooth: L2CAP socket layer initialized
[ 28.136299] Bluetooth: SCO socket layer initialized
[ 28.197565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.197576] Bluetooth: BNEP filters: protocol multicast
[ 28.249546] intel_rng: FWH not detected
[ 28.280129] Bluetooth: RFCOMM TTY layer initialized
[ 28.280149] Bluetooth: RFCOMM socket layer initialized
[ 28.280158] Bluetooth: RFCOMM ver 1.11
[ 28.418054] leds_ss4200: no LED devices found
[ 28.473470] type=1400 audit(1388945621.480:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=820 comm="apparmor_parser"
[ 28.475169] type=1400 audit(1388945621.480:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=820 comm="apparmor_parser"
[ 29.136809] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000
[ 29.183369] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 29.393504] init: failsafe main process (905) killed by TERM signal
[ 29.588785] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 29.668380] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 29.668515] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 29.668593] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 29.668680] usbcore: registered new interface driver btusb
[ 29.959702] type=1400 audit(1388945622.964:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1043 comm="apparmor_parser"
[ 29.989234] type=1400 audit(1388945622.996:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1043 comm="apparmor_parser"
[ 29.990078] type=1400 audit(1388945622.996:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1043 comm="apparmor_parser"
[ 30.000265] type=1400 audit(1388945623.008:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1042 comm="apparmor_parser"
[ 30.001528] type=1400 audit(1388945623.008:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1042 comm="apparmor_parser"
[ 30.050682] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 30.051273] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 30.057679] r8169 0000:02:00.0: eth0: link down
[ 30.058292] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.059501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.096070] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.098161] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.170485] Linux video capture interface: v2.00
[ 30.249980] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a118)
[ 30.266618] usbcore: registered new interface driver usbserial
[ 30.266851] USB Serial support registered for generic
[ 30.278319] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
[ 30.281763] usbcore: registered new interface driver uvcvideo
[ 30.281774] USB Video Class driver (1.1.1)
[ 30.287794] usbcore: registered new interface driver usbserial_generic
[ 30.287806] usbserial: USB Serial Driver core
[ 30.313229] USB Serial support registered for Sierra USB modem
[ 30.313335] sierra 4-2:1.0: Sierra USB modem converter detected
[ 30.315104] usb 4-2: Sierra USB modem converter now attached to ttyUSB0
[ 30.315383] usb 4-2: Sierra USB modem converter now attached to ttyUSB1
[ 30.315628] usb 4-2: Sierra USB modem converter now attached to ttyUSB2
[ 30.315704] usbcore: registered new interface driver sierra
[ 30.315713] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 30.449873] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 30.449887] cfg80211: World regulatory domain updated:
[ 30.449894] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.449905] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.449915] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.449925] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.449935] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.449945] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.527919] scsi2 : usb-storage 1-8:1.0
[ 30.530357] usbcore: registered new interface driver ums-realtek
[ 31.534250] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 31.537648] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 31.958716] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 33.255187] wlan0: authenticate with 52:f2:79:19:0b:78 (try 1)
[ 33.257570] wlan0: authenticated
[ 33.272376] wlan0: associate with 52:f2:79:19:0b:78 (try 1)
[ 33.284247] wlan0: RX AssocResp from 52:f2:79:19:0b:78 (capab=0x411 status=0 aid=6)
[ 33.284260] wlan0: associated
[ 33.285915] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.348175] init: anacron main process (1202) killed by TERM signal
[ 34.876170] init: plymouth-stop pre-start process (1773) terminated with status 1
[ 38.557463] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 44.048047] wlan0: no IPv6 routers present
[ 44.322551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
cdjkllm@cdjkllm:~$ voili voilou,merci
version 20.04 sur asus n55sf
Hors ligne
#2 Le 05/01/2014, à 20:56
- nam1962
Re : demarage xubuntu 1mn30
Il semble que tu as des disques externes, non ?
Sinon, pour 2Go je conseille toujours la version 32bits LTS et bien sûr mon tuto 
[ Modéré ]
Hors ligne
#3 Le 05/01/2014, à 21:14
- cdjklm
Re : demarage xubuntu 1mn30
bein non je n ai pas de disque externe du moin pas de connecter souvent et je suis en 12.04 LTS 32 bits et je compte y rester car plus a va plus ubuntu es lourd.
version 20.04 sur asus n55sf
Hors ligne
#4 Le 05/01/2014, à 21:58
- nam1962
Re : demarage xubuntu 1mn30
Vérifie dans ton bios comment sont gérés les disques durs
[ Modéré ]
Hors ligne
#5 Le 05/01/2014, à 22:15
- cdjklm
Re : demarage xubuntu 1mn30
dans le bios j ai exclu tous sauf mon disque dure et j ai rien gagne :-( en temp
version 20.04 sur asus n55sf
Hors ligne
#6 Le 05/01/2014, à 22:20
- nam1962
Re : demarage xubuntu 1mn30
Tu utilises le bluetooth?
[ Modéré ]
Hors ligne
#7 Le 05/01/2014, à 22:25
- cdjklm
Re : demarage xubuntu 1mn30
le desactiver au demarrage me fait gagner que tchi
version 20.04 sur asus n55sf
Hors ligne
#8 Le 05/01/2014, à 22:27
- nam1962
Re : demarage xubuntu 1mn30
Groumpf.
Passe
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get autoremove
sudo apt-get cleanPuis les sections A et C du tuto dans ma signature.
Dis nous après.
[ Modéré ]
Hors ligne
#9 Le 05/01/2014, à 22:52
- cdjklm
Re : demarage xubuntu 1mn30
apres ton tuto A et C je suis passe à 1mn50 j ai du en rajoute en faite:( merci quand meme
version 20.04 sur asus n55sf
Hors ligne
#10 Le 05/01/2014, à 23:24
- nam1962
Re : demarage xubuntu 1mn30
Peux tu redonner le dmesg (le premier indiquait un boot en 44 secondes)
[ Modéré ]
Hors ligne
#11 Le 05/01/2014, à 23:53
- cdjklm
Re : demarage xubuntu 1mn30
cdjkllm@cdjkllm:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-58-generic-pae (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 18:00:02 UTC 2013 (Ubuntu 3.2.0-58.88-generic-pae 3.2.53)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6e2000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: BenQ Joybook Lite U101/Joybook Lite U101, BIOS 1.07 04/23/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 2039M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00f7c40] f7c40
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1e3f000-2000000
[ 0.000000] RAMDISK: 35948000 - 36c9c000
[ 0.000000] ACPI: RSDP 000f7c10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f6db699 00074 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6e1d7a 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6dd225 04AE1 (v01 BenQ CALISTGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7f6e2fc0 00040
[ 0.000000] ACPI: APIC 7f6e1e6e 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7f6e1ed6 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6e1f0e 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 7f6e1f4a 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 7f6e1f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6e1fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6dcbd6 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6dc544 00692 (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6db70d 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1146MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] free_area_init_node: node 0, pgdat c1871a00, node_mem_map f4958200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2294 pages used for memmap
[ 0.000000] HighMem zone: 291292 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-58-generic-pae root=UUID=23eb16f8-3469-4765-8472-1b3106720de5 ro quiet splash acpi_osi=Linux vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8350720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f6d0)
[ 0.000000] Memory: 2029936k/2087744k available (5841k kernel code, 57356k reserved, 2858k data, 744k init, 1174344k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1880000 - 0xc193a000 ( 744 kB)
[ 0.000000] .data : 0xc15b473c - 0xc187f200 (2858 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b473c (5841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.563 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.12 BogoMIPS (lpj=6650252)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004069] Security Framework initialized
[ 0.004109] AppArmor: AppArmor initialized
[ 0.004114] Yama: becoming mindful.
[ 0.004239] Mount-cache hash table entries: 512
[ 0.004508] Initializing cgroup subsys cpuacct
[ 0.004523] Initializing cgroup subsys memory
[ 0.004542] Initializing cgroup subsys devices
[ 0.004548] Initializing cgroup subsys freezer
[ 0.004553] Initializing cgroup subsys blkio
[ 0.004569] Initializing cgroup subsys perf_event
[ 0.004614] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004624] CPU: Physical Processor ID: 0
[ 0.004629] CPU: Processor Core ID: 0
[ 0.004636] mce: CPU supports 5 MCE banks
[ 0.004650] CPU0: Thermal monitoring enabled (TM1)
[ 0.004658] using mwait in idle threads.
[ 0.010563] ACPI: Core revision 20110623
[ 0.020063] ftrace: allocating 26146 entries in 52 pages
[ 0.024112] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064824] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.068003] ... version: 3
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] CPU 1 irqstacks, hard=f44ea000 soft=f44ec000
[ 0.068003] Booting Node 0, Processors #1 Ok.
[ 0.068003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.156075] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156167] Brought up 2 CPUs
[ 0.156176] Total of 2 processors activated (6650.13 BogoMIPS).
[ 0.156779] devtmpfs: initialized
[ 0.156779] EVM: security.selinux
[ 0.156779] EVM: security.SMACK64
[ 0.156779] EVM: security.capability
[ 0.156779] PM: Registering ACPI NVS region at 7f6e2000 (4096 bytes)
[ 0.160683] print_constraints: dummy:
[ 0.160744] RTC time: 22:48:15, date: 01/05/14
[ 0.160837] NET: Registered protocol family 16
[ 0.161011] Trying to unpack rootfs image as initramfs...
[ 0.161386] EISA bus registered
[ 0.161436] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.161447] ACPI: bus type pci registered
[ 0.161668] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161681] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.161688] PCI: Using MMCONFIG for extended config space
[ 0.161695] PCI: Using configuration type 1 for base access
[ 0.176526] bio: create slab <bio-0> at 0
[ 0.176642] ACPI: Added _OSI(Module Device)
[ 0.176652] ACPI: Added _OSI(Processor Device)
[ 0.176660] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176668] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.176675] ACPI: Added _OSI(Linux)
[ 0.179583] ACPI: EC: Look up EC in DSDT
[ 0.185420] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.188314] ACPI: SSDT 7f6dc26d 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.189073] ACPI: Dynamic OEM Table Load:
[ 0.189085] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.189568] ACPI: SSDT 7f6dbc03 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.190269] ACPI: Dynamic OEM Table Load:
[ 0.190281] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.191148] ACPI: SSDT 7f6dc470 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.191884] ACPI: Dynamic OEM Table Load:
[ 0.191896] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.192280] ACPI: SSDT 7f6dc1e8 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.192987] ACPI: Dynamic OEM Table Load:
[ 0.192999] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.194148] ACPI: Interpreter enabled
[ 0.194148] ACPI: (supports S0 S3 S4 S5)
[ 0.194148] ACPI: Using IOAPIC for interrupt routing
[ 0.207602] ACPI: Power Resource [QFAN] (off)
[ 0.208505] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.208965] ACPI: No dock devices found.
[ 0.208975] HEST: Table not found.
[ 0.208989] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.210136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.212408] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.212420] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.212430] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.212441] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.212450] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.212460] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.212471] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.212513] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.212603] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.212627] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff]
[ 0.212642] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.212657] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.212672] pci 0000:00:02.0: reg 1c: [mem 0xf0200000-0xf023ffff]
[ 0.212747] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.212768] pci 0000:00:02.1: reg 10: [mem 0xf0080000-0xf00fffff]
[ 0.212932] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.212970] pci 0000:00:1b.0: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.213113] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.213126] pci 0000:00:1b.0: PME# disabled
[ 0.213178] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.213328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.213340] pci 0000:00:1c.0: PME# disabled
[ 0.213397] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.213547] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.213559] pci 0000:00:1c.2: PME# disabled
[ 0.213616] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.213699] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.213776] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.213856] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.213928] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.214007] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.214077] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.214156] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.214241] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.214279] pci 0000:00:1d.7: reg 10: [mem 0xf0444000-0xf04443ff]
[ 0.214418] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.214431] pci 0000:00:1d.7: PME# disabled
[ 0.214473] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.214617] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.214752] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.214767] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.214779] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.214791] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.214804] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.214897] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.214930] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.214952] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.214972] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.214993] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.215014] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.215093] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.215105] pci 0000:00:1f.2: PME# disabled
[ 0.215139] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.215226] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df]
[ 0.215410] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.215450] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.215505] pci 0000:02:00.0: reg 18: [mem 0xf0510000-0xf0510fff 64bit pref]
[ 0.215542] pci 0000:02:00.0: reg 20: [mem 0xf0500000-0xf050ffff 64bit pref]
[ 0.215568] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.215683] pci 0000:02:00.0: supports D1 D2
[ 0.215691] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.215704] pci 0000:02:00.0: PME# disabled
[ 0.220095] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.220113] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.220135] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.220273] pci 0000:03:00.0: [168c:001c] type 0 class 0x000200
[ 0.220324] pci 0000:03:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
[ 0.228098] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.228120] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.228251] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.228276] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.228287] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.228297] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.228307] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.228317] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.228327] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.228338] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.228375] pci_bus 0000:00: on NUMA node 0
[ 0.228392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.228964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.229160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.229425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.229604] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.229619] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.229628] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.241530] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.241718] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.241897] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.242090] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.242273] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.242456] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.242638] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.242817] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.243311] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.243342] vgaarb: loaded
[ 0.243347] vgaarb: bridge control possible 0000:00:02.0
[ 0.243912] i2c-core: driver [aat2870] using legacy suspend method
[ 0.243921] i2c-core: driver [aat2870] using legacy resume method
[ 0.244239] SCSI subsystem initialized
[ 0.244436] libata version 3.00 loaded.
[ 0.244636] usbcore: registered new interface driver usbfs
[ 0.244688] usbcore: registered new interface driver hub
[ 0.244808] usbcore: registered new device driver usb
[ 0.245239] PCI: Using ACPI for IRQ routing
[ 0.257208] PCI: pci_cache_line_size set to 64 bytes
[ 0.257371] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.257384] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.257812] NetLabel: Initializing
[ 0.257820] NetLabel: domain hash size = 128
[ 0.257825] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.257859] NetLabel: unlabeled traffic allowed by default
[ 0.258096] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.258112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.258128] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.268197] Switching to clocksource hpet
[ 0.292749] AppArmor: AppArmor Filesystem Enabled
[ 0.292834] pnp: PnP ACPI init
[ 0.292893] ACPI: bus type pnp registered
[ 0.294577] pnp 00:00: [bus 00-ff]
[ 0.294589] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.294598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.294607] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.294617] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.294626] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.294635] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.294644] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.294653] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.294663] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.294674] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.294684] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.294694] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.294704] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.294714] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.294724] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.294732] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.294741] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.294750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.294759] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.294952] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.295059] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.295069] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.295077] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.295086] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.295094] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.295102] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.295110] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.295119] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.295286] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.295298] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.295309] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.295320] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.295330] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.295341] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.295352] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.295362] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.295375] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296216] pnp 00:02: [io 0x0000-0x001f]
[ 0.296227] pnp 00:02: [io 0x0081-0x0091]
[ 0.296235] pnp 00:02: [io 0x0093-0x009f]
[ 0.296243] pnp 00:02: [io 0x00c0-0x00df]
[ 0.296251] pnp 00:02: [dma 4]
[ 0.296399] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.296436] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.296575] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.296814] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.297004] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.297019] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.297074] pnp 00:05: [io 0x00f0]
[ 0.297100] pnp 00:05: [irq 13]
[ 0.297228] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.297273] pnp 00:06: [io 0x002e-0x002f]
[ 0.297282] pnp 00:06: [io 0x0061]
[ 0.297288] pnp 00:06: [io 0x0063]
[ 0.297294] pnp 00:06: [io 0x0065]
[ 0.297300] pnp 00:06: [io 0x0067]
[ 0.297306] pnp 00:06: [io 0x0068]
[ 0.297314] pnp 00:06: [io 0x006c]
[ 0.297321] pnp 00:06: [io 0x0070]
[ 0.297328] pnp 00:06: [io 0x0080]
[ 0.297335] pnp 00:06: [io 0x0092]
[ 0.297342] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.297350] pnp 00:06: [io 0x0680-0x069f]
[ 0.297357] pnp 00:06: [io 0x0800-0x080f]
[ 0.297365] pnp 00:06: [io 0x1000-0x107f]
[ 0.297373] pnp 00:06: [io 0x1180-0x11bf]
[ 0.297388] pnp 00:06: [io 0x1640-0x164f]
[ 0.297594] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.297606] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.297617] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.297627] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.297637] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.297649] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297751] pnp 00:07: [io 0x06a0-0x06af]
[ 0.297760] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.297930] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.297942] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.297954] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297993] pnp 00:08: [io 0x0070-0x0077]
[ 0.298015] pnp 00:08: [irq 8]
[ 0.298163] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.298224] pnp 00:09: [io 0x0060]
[ 0.298231] pnp 00:09: [io 0x0064]
[ 0.298250] pnp 00:09: [irq 1]
[ 0.298387] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.298439] pnp 00:0a: [irq 12]
[ 0.298575] pnp 00:0a: Plug and Play ACPI device, IDs SYN1027 SYN1000 SYN0002 PNP0f13 (active)
[ 0.298680] pnp: PnP ACPI: found 11 devices
[ 0.298688] ACPI: ACPI bus type pnp unregistered
[ 0.298698] PnPBIOS: Disabled by ACPI PNP
[ 0.341138] PCI: max bus depth: 1 pci_try_num: 2
[ 0.341218] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x800fffff]
[ 0.341235] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 0.341253] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.341270] pci 0000:00:1c.0: BAR 14: reassigned [mem 0x80300000-0x807fffff]
[ 0.341284] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0520000-0xf053ffff pref]
[ 0.341295] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.341307] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.341323] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x807fffff]
[ 0.341338] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.341357] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.341367] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.341381] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.341394] pci 0000:00:1c.2: bridge window [mem 0x80100000-0x802fffff 64bit pref]
[ 0.341410] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.341478] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.341492] pci 0000:00:1c.0: setting latency timer to 64
[ 0.341523] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.341536] pci 0000:00:1c.2: setting latency timer to 64
[ 0.341555] pci 0000:00:1e.0: setting latency timer to 64
[ 0.341566] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.341575] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.341584] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341594] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341603] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341612] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341621] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.341631] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.341640] pci_bus 0000:02: resource 1 [mem 0x80300000-0x807fffff]
[ 0.341650] pci_bus 0000:02: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.341659] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.341668] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.341678] pci_bus 0000:03: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[ 0.341688] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.341697] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.341706] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341715] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341724] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341733] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341743] pci_bus 0000:0a: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.341868] NET: Registered protocol family 2
[ 0.342074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.342957] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.344143] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.344640] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.344653] TCP reno registered
[ 0.344670] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.344695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.344953] NET: Registered protocol family 1
[ 0.345014] pci 0000:00:02.0: Boot video device
[ 0.345099] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.345141] pci 0000:00:1d.0: PCI INT A disabled
[ 0.345190] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.345234] pci 0000:00:1d.1: PCI INT B disabled
[ 0.345261] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.345297] pci 0000:00:1d.2: PCI INT C disabled
[ 0.345333] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.345376] pci 0000:00:1d.3: PCI INT D disabled
[ 0.345406] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.345469] pci 0000:00:1d.7: PCI INT A disabled
[ 0.345514] PCI: CLS 64 bytes, default 64
[ 0.345529] Simple Boot Flag at 0x36 set to 0x1
[ 0.346668] audit: initializing netlink socket (disabled)
[ 0.346703] type=2000 audit(1388962095.344:1): initialized
[ 0.407225] highmem bounce pool size: 64 pages
[ 0.407243] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.414184] VFS: Disk quotas dquot_6.5.2
[ 0.414415] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.416547] fuse init (API version 7.17)
[ 0.416936] msgmni has been set to 1671
[ 0.418190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.418302] io scheduler noop registered
[ 0.418310] io scheduler deadline registered
[ 0.418337] io scheduler cfq registered (default)
[ 0.418713] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.418811] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.418981] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.419065] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.419348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.419446] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.419701] intel_idle: MWAIT substates: 0x20220
[ 0.419721] intel_idle: v0.4 model 0x1C
[ 0.419727] intel_idle: lapic_timer_reliable_states 0x2
[ 0.419734] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.419960] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.420244] ACPI: AC Adapter [ACAD] (off-line)
[ 0.420507] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.421374] ACPI: Lid Switch [LID0]
[ 0.421561] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.421577] ACPI: Power Button [PWRB]
[ 0.421765] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C0E:00/input/input2
[ 0.421780] ACPI: Sleep Button [SLPB]
[ 0.421946] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.421959] ACPI: Power Button [PWRF]
[ 0.422192] ACPI: Fan [FAN] (off)
[ 0.427331] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.427342] ACPI: Thermal Zone [THRM] (57 C)
[ 0.427421] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.427454] ACPI: Battery Slot [BAT1] (battery present)
[ 0.427645] ERST: Table is not found!
[ 0.427652] GHES: HEST is not enabled!
[ 0.427935] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.431985] isapnp: Scanning for PnP cards...
[ 0.701436] ACPI: Battery Slot [BAT1] (battery present)
[ 0.787247] isapnp: No Plug & Play device found
[ 1.222847] Freeing initrd memory: 19792k freed
[ 1.277119] Linux agpgart interface v0.103
[ 1.277279] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.277459] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.277647] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.277900] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.282236] brd: module loaded
[ 1.284526] loop: module loaded
[ 1.285020] ata_piix 0000:00:1f.2: version 2.13
[ 1.285054] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.285066] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.440050] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.440857] scsi0 : ata_piix
[ 1.441089] scsi1 : ata_piix
[ 1.442544] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.442552] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.443750] Fixed MDIO Bus: probed
[ 1.443815] tun: Universal TUN/TAP device driver, 1.6
[ 1.443820] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.443995] PPP generic driver version 2.4.2
[ 1.444331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.444382] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.444423] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.444431] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.444563] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.444603] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.444623] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.448514] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.448556] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 1.464038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.464396] hub 1-0:1.0: USB hub found
[ 1.464409] hub 1-0:1.0: 8 ports detected
[ 1.464599] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.464638] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.464691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.464710] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.464717] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.464869] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.464914] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.465278] hub 2-0:1.0: USB hub found
[ 1.465291] hub 2-0:1.0: 2 ports detected
[ 1.465439] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.465457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.465465] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.465609] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.465673] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.466027] hub 3-0:1.0: USB hub found
[ 1.466039] hub 3-0:1.0: 2 ports detected
[ 1.466181] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.466199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.466206] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.466333] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.466409] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.466763] hub 4-0:1.0: USB hub found
[ 1.466775] hub 4-0:1.0: 2 ports detected
[ 1.466918] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.466936] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.466943] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.467081] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.467143] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.467493] hub 5-0:1.0: USB hub found
[ 1.467504] hub 5-0:1.0: 2 ports detected
[ 1.467798] usbcore: registered new interface driver libusual
[ 1.467915] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.472165] i8042: Detected active multiplexing controller, rev 1.1
[ 1.473686] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.473704] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.473788] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.473869] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.473943] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.474324] mousedev: PS/2 mouse device common for all mice
[ 1.474911] rtc_cmos 00:08: RTC can wake from S4
[ 1.475133] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.475181] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.475328] device-mapper: uevent: version 1.0.3
[ 1.475528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.475586] EISA: Probing bus 0 at eisa.0
[ 1.475594] EISA: Cannot allocate resource for mainboard
[ 1.475600] Cannot allocate resource for EISA slot 1
[ 1.475606] Cannot allocate resource for EISA slot 2
[ 1.475611] Cannot allocate resource for EISA slot 3
[ 1.475617] Cannot allocate resource for EISA slot 4
[ 1.475622] Cannot allocate resource for EISA slot 5
[ 1.475628] Cannot allocate resource for EISA slot 6
[ 1.475633] Cannot allocate resource for EISA slot 7
[ 1.475639] Cannot allocate resource for EISA slot 8
[ 1.475644] EISA: Detected 0 cards.
[ 1.475665] cpufreq-nforce2: No nForce2 chipset.
[ 1.475850] cpuidle: using governor ladder
[ 1.476184] cpuidle: using governor menu
[ 1.476190] EFI Variables Facility v0.08 2004-May-17
[ 1.476765] TCP cubic registered
[ 1.477082] NET: Registered protocol family 10
[ 1.478406] NET: Registered protocol family 17
[ 1.478419] Registering the dns_resolver key type
[ 1.478469] Using IPI No-Shortcut mode
[ 1.478830] PM: Hibernation image not present or could not be loaded.
[ 1.478857] registered taskstats version 1
[ 1.497787] Magic number: 14:465:855
[ 1.497953] rtc_cmos 00:08: setting system clock to 2014-01-05 22:48:16 UTC (1388962096)
[ 1.498940] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.498947] EDD information not available.
[ 1.512369] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.604553] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001A, max UDMA/100
[ 1.604563] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.612551] ata1.00: configured for UDMA/100
[ 1.612911] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.613293] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.613396] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.613537] sd 0:0:0:0: [sda] Write Protect is off
[ 1.613548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.613662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.681848] sda: sda1 sda2 < sda5 >
[ 1.683150] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.683283] Freeing unused kernel memory: 744k freed
[ 1.684085] Write protecting the kernel text: 5844k
[ 1.684223] Write protecting the kernel read-only data: 2388k
[ 1.684230] NX-protecting the kernel data: 4396k
[ 1.732054] udevd[89]: starting version 175
[ 1.888163] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 1.915315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.919079] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.919154] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.919225] r8169 0000:02:00.0: setting latency timer to 64
[ 1.919341] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.921132] r8169 0000:02:00.0: eth0: RTL8102e at 0xf841c000, 00:23:8b:ed:34:9f, XID 04a00000 IRQ 42
[ 1.928055] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.000743] [drm] Initialized drm 1.1.0 20060810
[ 2.084433] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.084451] i915 0000:00:02.0: setting latency timer to 64
[ 2.157074] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.157085] [drm] Driver supports precise vblank timestamp query.
[ 2.183957] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.238227] fixme: max PWM is zero.
[ 2.348125] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[ 2.495812] [drm] initialized overlay support
[ 2.513467] fbcon: inteldrmfb (fb0) is primary device
[ 2.513620] Console: switching to colour frame buffer device 128x36
[ 2.513697] fb0: inteldrmfb frame buffer device
[ 2.513703] drm: registered panic notifier
[ 2.513746] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.465577] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.144119] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 6.556092] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 27.658224] Initializing USB Mass Storage driver...
[ 27.658466] usbcore: registered new interface driver usb-storage
[ 27.658472] USB Mass Storage support registered.
[ 28.093101] Adding 2085884k swap on /dev/sda5. Priority:-1 extents:1 across:2085884k
[ 28.117605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.171890] udevd[364]: starting version 175
[ 28.196413] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 28.259051] lp: driver loaded but no devices found
[ 28.301668] cfg80211: Calling CRDA to update world regulatory domain
[ 28.402569] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 28.402597] ath5k 0000:03:00.0: setting latency timer to 64
[ 28.402710] ath5k 0000:03:00.0: registered as 'phy0'
[ 28.814221] type=1400 audit(1388958523.810:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=458 comm="apparmor_parser"
[ 28.815548] type=1400 audit(1388958523.810:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=458 comm="apparmor_parser"
[ 28.816489] cfg80211: World regulatory domain updated:
[ 28.816498] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 28.816508] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.816517] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.816526] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.816535] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.816544] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.817371] type=1400 audit(1388958523.814:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=458 comm="apparmor_parser"
[ 28.907532] ath: EEPROM regdomain: 0x65
[ 28.907543] ath: EEPROM indicates we should expect a direct regpair map
[ 28.907554] ath: Country alpha2 being used: 00
[ 28.907559] ath: Regpair used: 0x65
[ 28.907570] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907581] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907590] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907600] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907608] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907619] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907627] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907637] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907646] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907656] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907665] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907675] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907683] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907694] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907702] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907712] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907721] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907732] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907740] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907751] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907760] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907771] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907780] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907791] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907800] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 28.907811] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 28.907819] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 28.907968] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 28.924814] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.926882] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 29.390413] ppdev: user-space parallel port driver
[ 29.399517] Bluetooth: Core ver 2.16
[ 29.399748] NET: Registered protocol family 31
[ 29.399758] Bluetooth: HCI device and connection manager initialized
[ 29.399767] Bluetooth: HCI socket layer initialized
[ 29.399774] Bluetooth: L2CAP socket layer initialized
[ 29.399797] Bluetooth: SCO socket layer initialized
[ 29.437947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.437958] Bluetooth: BNEP filters: protocol multicast
[ 29.464955] Bluetooth: RFCOMM TTY layer initialized
[ 29.464975] Bluetooth: RFCOMM socket layer initialized
[ 29.464983] Bluetooth: RFCOMM ver 1.11
[ 29.654603] type=1400 audit(1388958524.650:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=642 comm="apparmor_parser"
[ 29.665511] type=1400 audit(1388958524.662:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=642 comm="apparmor_parser"
[ 29.841363] intel_rng: FWH not detected
[ 29.881687] leds_ss4200: no LED devices found
[ 30.100644] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 30.102995] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 30.103079] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 30.183533] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 30.185615] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 30.727900] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000
[ 30.770697] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 30.910647] init: failsafe main process (860) killed by TERM signal
[ 31.386709] type=1400 audit(1388958526.382:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=999 comm="apparmor_parser"
[ 31.387926] type=1400 audit(1388958526.382:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=999 comm="apparmor_parser"
[ 31.394723] type=1400 audit(1388958526.390:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1000 comm="apparmor_parser"
[ 31.396620] type=1400 audit(1388958526.394:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1000 comm="apparmor_parser"
[ 31.397438] type=1400 audit(1388958526.394:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1000 comm="apparmor_parser"
[ 31.403869] r8169 0000:02:00.0: eth0: link down
[ 31.410611] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.411954] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.437693] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.439649] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.990597] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 32.107570] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 32.117264] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 32.304023] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 32.310512] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 32.700758] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 32.848271] usbcore: registered new interface driver btusb
[ 33.019465] Linux video capture interface: v2.00
[ 33.043273] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a118)
[ 33.090909] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
[ 33.099138] usbcore: registered new interface driver uvcvideo
[ 33.099149] USB Video Class driver (1.1.1)
[ 33.139724] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 33.225318] usbcore: registered new interface driver usbserial
[ 33.225377] USB Serial support registered for generic
[ 33.229132] usbcore: registered new interface driver usbserial_generic
[ 33.229145] usbserial: USB Serial Driver core
[ 33.230431] USB Serial support registered for Sierra USB modem
[ 33.230536] sierra 4-2:1.0: Sierra USB modem converter detected
[ 33.233498] usb 4-2: Sierra USB modem converter now attached to ttyUSB0
[ 33.234030] usb 4-2: Sierra USB modem converter now attached to ttyUSB1
[ 33.234619] usb 4-2: Sierra USB modem converter now attached to ttyUSB2
[ 33.234919] usbcore: registered new interface driver sierra
[ 33.234929] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 33.398133] scsi2 : usb-storage 1-8:1.0
[ 33.398494] usbcore: registered new interface driver ums-realtek
[ 34.406087] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 34.408431] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 34.458248] wlan0: authenticate with 52:f2:79:19:0b:78 (try 1)
[ 34.460378] wlan0: authenticated
[ 34.468197] wlan0: associate with 52:f2:79:19:0b:78 (try 1)
[ 34.470585] wlan0: RX AssocResp from 52:f2:79:19:0b:78 (capab=0x411 status=0 aid=2)
[ 34.470599] wlan0: associated
[ 34.472261] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.546306] Non-volatile memory driver v1.3
[ 41.433335] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 45.184046] wlan0: no IPv6 routers present
[ 45.757361] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 63.085046] init: plymouth-stop pre-start process (2553) terminated with status 1
cdjkllm@cdjkllm:~$ voili voilou par contre quand je chronometre avec mon mobil le premier dmesg ne correspond pas a 44s mais bien a 1mn30 lorsque les dernieres icone de mon gnome panel finisse de charger bizarre
version 20.04 sur asus n55sf
Hors ligne
#12 Le 06/01/2014, à 00:11
- cdjklm
Re : demarage xubuntu 1mn30
gros problem la
[ 0.787247] isapnp: No Plug & Play device found
[ 1.222847] Freeing initrd memory: 19792k freedet la
[ 0.431985] isapnp: Scanning for PnP cards...
[ 0.701436] ACPI: Battery Slot [BAT1] (battery present)ca me fait environ 40 s
version 20.04 sur asus n55sf
Hors ligne
#13 Le 06/01/2014, à 00:14
- nam1962
Re : demarage xubuntu 1mn30
Là, il y a un truc sur lequel on trouvera sûrement un expert : les deux gros sauts correspondent aux mises en oeuvre de périphériques (USB et SCSI à ce que je vois).
[ Modéré ]
Hors ligne
#14 Le 06/01/2014, à 00:22
- cdjklm
Re : demarage xubuntu 1mn30
oui c est pas vraiment important il ne me sert que de depannage et fonctionne tres bien donc j ai du temp et ne cherche qu a apprendre.
merci a toi de ton support
version 20.04 sur asus n55sf
Hors ligne
Pages : 1