Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails) *** mise à jour 12/10/2014 ***

#1 Le 24/01/2009, à 22:36

sangmele

xubuntu demarrage trop lent

j'ai tout essaye : ca fait des mois que je navigue sur les differents forums, mais rien n'y fait.
3 minutes pour demarrer
Alors voici ;on diagramme de boot et quelques autres precisions. je ne dis qu'une chose : aidez-moi !
je suis en double boot avec xp (qui demarre en 1,5min...)

file:///var/log/bootchart/intrepid-20090124-5.png


PS ; j'ai un autre PB, je ne sais pas comment joindre l'image a ce post

Hors ligne

#2 Le 25/01/2009, à 01:02

FestinMWM

Re : xubuntu demarrage trop lent

Salut,

Donne nous plus de précisions sur ton ordi : âge, processeur, carte graphique, ...

  1)
Dans une console, tape : dmesg|more (appuie sur espace pour défiler) et tu verras un "log" (traduction ?) qui liste les événements. Comme par exemple [    1.071985] Linux Plug and Play Support v0.97 (c) Adam Belay

Les chiffres entre crochets [] donne un horodatage précis de l'événement.
Si tu vois un saut important dans ces chiffres, la perte de temps est lié à l'événement juste avant.
Et tu peux nous faire un simple copier-coller smile

  2)
Pour joindre une image, il faut la rendre accessible aux internautes. La méthode la plus répandu est d'héberger l'image en allant sur www.imageshack.us ou sur www.hiboox.com par exemple.
Pour le mettre dans le forum, tu dispose souvent de toute une liste de lien à copier-coller après avoir uploader ton image.
PS : http://photo.forumperso.com/tutoriaux-f36/tuto-n11-comparatif-des-differents-site-d-hebergement-d-image-t1219.htm
Je crois que c'est écrit dans le forum Ubuntu.

Dernière modification par FestinMWM (Le 25/01/2009, à 01:15)


Dapper-->Edgy-->Feisty-->Gutsy-->Hardy-->Ibby-->Jaunty-->Karmic> Mint LXDE sur PC de 2001 AMD 800 MHz, 1024Mo RAM, 9 Go linux, geforce old 4200
La liberté, c'est ce que permet la longueur de la laisse.

Hors ligne

#3 Le 25/01/2009, à 14:36

sangmele

Re : xubuntu demarrage trop lent

merci pour ces billes. Voici les éléments. Il y a pas mal de temps d'attente dans le démarrage.
J'ai mis ceux qui me semblaient les plus longs

pentium III coppermine 744 MHz
248 Mb de RAM
ATI Rage Mobility (Sony)

Xubuntu 8.10 intrepid
kernel 2.6.27-9 generic

=======================================================
[    0.033997] ACPI: Checking initramfs for custom DSDT
[    0.984195] weird, boot CPU (#0) not listedby the BIOS.
[    0.984208] SMP motherboard not detected.
[    0.984218] Local APIC not detected. Using dummy APIC emulation.
[    0.984225] SMP disabled
=======================================================
[    1.571644] TCP reno registered
[    1.571999] NET: Registered protocol family 1
[    1.572464] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[    2.566741]  it is
[    2.612060] Clocksource tsc unstable (delta = -2652349323 ns)
[    7.196349] Freeing initrd memory: 7999k freed
[    7.197118] Simple Boot Flag at 0x35 set to 0x1
[    7.204755] audit: initializing netlink socket (disabled)
[    7.204810] type=2000 audit(1232886821.204:1): initialized
=======================================================
[    7.336305] isapnp: Scanning for PnP cards...
[    8.720154] isapnp: No Plug & Play device found
[    9.504250] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
=======================================================
[    9.596395] Write protecting the kernel read-only data: 936k
[    9.620970] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input
1
=======================================================
[   13.072266] fuse init (API version 7.9)
[   14.330924] ACPI: CPU0 (power states: C1[C1] C2[C2])
=======================================================
[   14.368364] ACPI: Thermal Zone [ATF0] (49 C)
[   15.841902] No dock devices found.
[   16.468280] SCSI subsystem initialized
[   17.165907] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
=======================================================
[   21.025944] EXT3-fs: mounted filesystem with ordered data mode.
[   24.824239] usb-storage: device scan complete
[   24.947080] scsi 2:0:0:0: Direct-Access     Sony     MSC-U01          1.00 PQ: 0 ANSI: 0 CCS
[   25.075244] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   25.075644] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   33.899483] udevd version 124 started
[   36.669111] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
=======================================================
[   38.832128] ACPI: Power Button (CM) [PWRB]
[   41.423700] parport_pc 00:0c: reported by Plug and Play ACPI
=======================================================
[   45.716094] firmware: requesting yamaha/ds1_dsp.fw
[   48.918449] cs: IO port probe 0x100-0x3af: clean.
=======================================================
[   50.428764] firmware: requesting yamaha/ds1e_ctrl.fw
[   52.761741] loop: module loaded
=======================================================
[   58.326101] ACPI: WMI: Mapper loaded
[   59.192375] cpufreq: change to state 1 failed with new_state 2 and result 0
[   59.192375] cpufreq: change to state 0 failed with new_state 2 and result 0
[   62.560518] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
=======================================================
[   63.989695] sonypi: probe of sonypi failed with error -16
[   66.868764] ttyS2: LSR safety check engaged!
[   67.317465] Bluetooth: Core ver 2.13
=======================================================
[   67.643456] Bluetooth: SCO socket layer initialized
[  109.854765] NET: Registered protocol family 10
=======================================================
[  109.870168] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  182.412270] ppdev0: registered pardevice
=======================================================
[  185.036780] ppdev0: unregistered pardevice
[  230.784069] usb 1-2: new full speed USB device using uhci_hcd and address 4

Hors ligne

#4 Le 26/01/2009, à 20:59

sangmele

Re : xubuntu demarrage trop lent

et voici le bootchart de mon Sony (il n'est pas du meme jour que les lignes ci dessus)

intrepid200901261dv7.th.png

merci de votre aide !

Hors ligne

#5 Le 29/01/2009, à 14:03

sangmele

Re : xubuntu demarrage trop lent

help les amis !
je commence à me dire que XP c'est pas mal du tout...

Hors ligne

#6 Le 29/01/2009, à 14:29

sylvainsjc

Re : xubuntu demarrage trop lent

Peux tu appliquer certaines recommandation précisées ici


ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#7 Le 30/01/2009, à 11:48

sangmele

Re : xubuntu demarrage trop lent

j'ai tout essaye et ça ne marche toujours pas
sad

Hors ligne

#8 Le 30/01/2009, à 12:25

sylvainsjc

Re : xubuntu demarrage trop lent

Vraiment pas d'amélioration ? Dans ton démarrage, je vois du bluetooth, le port serie, etc. Tu te sers de tout ça ?


ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#9 Le 30/01/2009, à 13:01

sangmele

Re : xubuntu demarrage trop lent

j'ai désactivé pas mal de services, comme conseilllé dans le tuto. Je crois que j'ai gardé le port série.
je vais voir ça et je vais poster mon nouveau démarrage.
En plus, l'affichage est de mauvaise qualité (et j'ai vérifié que j'ai bonne résolution et taux de rafraichissement) et le démarrage plante 1 fois sur 3.
J'ai actuellement xubuntu. Penses tu que Ubuntu serait plus stable ?

Hors ligne

#10 Le 30/01/2009, à 13:29

sylvainsjc

Re : xubuntu demarrage trop lent

Pas avec 248 Mb de RAM hmm


ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#11 Le 31/01/2009, à 00:16

sangmele

Re : xubuntu demarrage trop lent

rien à faire, je désespère : XP démarre toujours en 1min30 et Xubuntu en 2min30. j'ai réussi à gratter lamentablement 30s et j'ai toujours pas le son. Sans compter qu'il est super instable et plante au démarrage 1 fois sur 3 au démarrage. PLus l'affichage de mauvaise qualité. sad sad sad

Hors ligne

#12 Le 31/01/2009, à 00:56

sangmele

Re : xubuntu demarrage trop lent

en revanche, mon log s'est bien raccourci et il n'y a plus qu'un gros temps d'attente.
il y aurait un rapport avec un USB, mais je n'ai rien sur ce PC...

[   10.845364] PM: Resume from disk failed.
[   10.992002] kjournald starting.  Commit interval 5 seconds
[   10.992086] EXT3-fs: mounted filesystem with ordered data mode.
[   15.140195] usb-storage: device scan complete
[   15.195058] scsi 2:0:0:0: Direct-Access     Sony     MSC-U01          1.00 PQ: 0 ANSI: 0 CCS
[   15.323233] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   15.323643] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  132.832127] usb 1-2: USB disconnect, address 3
[  213.801035] udevd version 124 started

Hors ligne

#13 Le 31/01/2009, à 10:56

sylvainsjc

Re : xubuntu demarrage trop lent

pas d'USB du tout sur ce PC ?

Peux tu regarder si tu vois un message significatif au démarrage
Dès que le logo xubuntu apparait, appuyer sur CTRL-ALT-F1 (provoque le passage en console)

Peux tu aussi retourner le contenu de cette commande :

ls -al /etc/rc2.d/

ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#14 Le 31/01/2009, à 12:12

sangmele

Re : xubuntu demarrage trop lent

voilà, et merci du temps que tu passes à m'aider

total 20
drwxr-xr-x   2 root root  4096 2009-01-31 01:01 .
drwxr-xr-x 124 root root 12288 2009-01-31 11:06 ..
-rw-r--r--   1 root root   556 2008-10-14 15:02 README
lrwxrwxrwx   1 root root    19 2009-01-17 19:46 S01policykit -> ../init.d/policykit
lrwxrwxrwx   1 root root    17 2009-01-17 19:41 S05vbesave -> ../init.d/vbesave
lrwxrwxrwx   1 root root    15 2009-01-17 19:08 S10acpid -> ../init.d/acpid
lrwxrwxrwx   1 root root    25 2009-01-17 19:46 S10powernowd.early -> ../init.d/powernowd.early
lrwxrwxrwx   1 root root    18 2009-01-17 19:04 S10sysklogd -> ../init.d/sysklogd
lrwxrwxrwx   1 root root    34 2009-01-17 19:15 S10xserver-xorg-input-wacom -> ../init.d/xserver-xorg-input-wacom
lrwxrwxrwx   1 root root    15 2009-01-17 19:04 S11klogd -> ../init.d/klogd
lrwxrwxrwx   1 root root    14 2009-01-17 19:15 S12dbus -> ../init.d/dbus
lrwxrwxrwx   1 root root    22 2009-01-17 19:45 S14avahi-daemon -> ../init.d/avahi-daemon
lrwxrwxrwx   1 root root    14 2009-01-17 19:42 S20apmd -> ../init.d/apmd
lrwxrwxrwx   1 root root    16 2009-01-17 19:44 S20apport -> ../init.d/apport
lrwxrwxrwx   1 root root    14 2009-01-17 19:48 S20cups -> ../init.d/cups
lrwxrwxrwx   1 root root    15 2009-01-17 19:41 S20rsync -> ../init.d/rsync
lrwxrwxrwx   1 root root    15 2009-01-17 19:47 S21aumix -> ../init.d/aumix
lrwxrwxrwx   1 root root    13 2009-01-17 19:46 S24hal -> ../init.d/hal
lrwxrwxrwx   1 root root    24 2009-01-17 19:46 S28NetworkManager -> ../init.d/NetworkManager
lrwxrwxrwx   1 root root    13 2009-01-31 01:01 S30gdm -> ../init.d/gdm
lrwxrwxrwx   1 root root    31 2009-01-17 19:54 S30system-tools-backends -> ../init.d/system-tools-backends
lrwxrwxrwx   1 root root    22 2009-01-24 18:52 S40dhcp3-server -> ../init.d/dhcp3-server
lrwxrwxrwx   1 root root    14 2009-01-17 19:39 S89cron -> ../init.d/cron
lrwxrwxrwx   1 root root    17 2009-01-17 19:47 S98usplash -> ../init.d/usplash
lrwxrwxrwx   1 root root    22 2009-01-17 19:41 S99acpi-support -> ../init.d/acpi-support
lrwxrwxrwx   1 root root    21 2009-01-17 19:41 S99laptop-mode -> ../init.d/laptop-mode
lrwxrwxrwx   1 root root    18 2009-01-17 19:03 S99rc.local -> ../init.d/rc.local
lrwxrwxrwx   1 root root    19 2009-01-17 19:03 S99rmnologin -> ../init.d/rmnologin
lrwxrwxrwx   1 root root    24 2009-01-24 19:31 S99stop-bootchart -> ../init.d/stop-bootchart
lrwxrwxrwx   1 root root    24 2009-01-17 19:46 S99stop-readahead -> ../init.d/stop-readahead

Hors ligne

#15 Le 31/01/2009, à 12:29

Hermes le Messager

Re : xubuntu demarrage trop lent

sangmele a écrit :

help les amis !
je commence à me dire que XP c'est pas mal du tout...

Ce genre de message devraient décourager les gens de te répondre. C'est le genre de petites insinuations genre : aidez moi à ne pas retourner sous XP, bref, du chantage au retour sous windows... On s'en fout completement que tu retourne ou non sous windows. roll Si c'est mieux pour toi et si windows boote plus vite et marche mieux, reste sous windows. Pourquoi vouloir changer quelque chose qui marche ?

Hors ligne

#16 Le 31/01/2009, à 18:55

sangmele

Re : xubuntu demarrage trop lent

c'est pas faux.
Je rêve d'un truc qui démarrerait en 30s. C'est pour ça que je m'acharne.
et puis l'open source, j'y crois. C'est un super truc. Seulement je n'arrive pas à le faire marcher correctement.

Hors ligne

#17 Le 01/02/2009, à 13:45

sylvainsjc

Re : xubuntu demarrage trop lent

Peux tu préciser le modèle exact de ton PC STP

1) tu installes sysv-rc-conf

sudo apt-get install sysv-rc-conf

2) tu nous donnes le retour de la commande

sudo sysv-rc-conf --list

ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#18 Le 01/02/2009, à 14:31

sangmele

Re : xubuntu demarrage trop lent

voila :

mon PC est un VAIO portable pcg z505ls

NetworkManag 2:on    3:on    4:on    5:on
acpi-support 1:off    2:on    3:on    4:on    5:on
acpid        1:off    2:on    3:on    4:on    5:on
alsa-utils   0:off    6:off
anacron      1:off    3:on    4:on    5:on
apmd         0:off    1:off    2:on    3:on    4:on    5:on    6:off
apparmor     S:on
apport       0:off    1:off    2:on    3:on    4:on    5:on    6:off
atd          1:off    3:on    4:on    5:on
aumix        0:off    1:off    2:on    3:on    4:on    5:on    6:off
avahi-daemon 0:off    1:off    2:on    3:on    4:on    5:on    6:off
bluetooth   
bootlogd   
console-setu S:on
cron         1:off    2:on    3:on    4:on    5:on
cups         1:off    2:on    3:on    4:on    5:on
dbus         1:off    2:on    3:on    4:on    5:on
dhcp3-server 1:off    2:on    3:on    4:on    5:on
dns-clean    S:on
firestarter
gdm          0:off    1:off    2:on    3:on    4:on    5:on    6:off
hal          1:off    2:on    3:on    4:on    5:on
halt         0:on
hotkey-setup
keyboard-set S:on
killprocs    1:on
klogd        1:off    2:on    3:on    4:on    5:on
laptop-mode  0:off    1:off    2:on    3:on    4:on    5:on    6:off
linux-restri 0:on    6:on    S:on
loopback     S:on
module-init- S:on
mountoverflo 0:off    6:off    S:on
networking   0:on    6:on    S:on
pcmciautils  S:on
policykit    1:off    2:on    3:on    4:on    5:on
powernowd    1:off    3:on    4:on    5:on
powernowd.ea 2:on
pppd-dns     S:on
procps       S:on
rc.local     2:on    3:on    4:on    5:on
readahead    S:on
readahead-de S:on
readahead~ 
reboot       6:on
rmnologin    2:on    3:on    4:on    5:on
rsync        1:off    2:on    3:on    4:on    5:on
screen-clean S:on
sendsigs     0:on    6:on
single       1:on
stop-bootcha 2:on    3:on    4:on    5:on
stop-bootlog
stop-bootlog
stop-readahe 2:on    3:on    4:on    5:on
sysklogd     1:off    2:on    3:on    4:on    5:on
system-tools 1:off    2:on    3:on    4:on    5:on
udev         S:on
udev-finish  S:on
ufw          1:off    S:on
umountfs     0:on    6:on
umountroot   0:on    6:on
urandom      0:on    6:on    S:on
usplash      0:off    1:off    2:on    3:on    4:on    5:on    6:off
vbesave      2:on    3:on    4:on    5:on
wpa-ifupdown 0:on    6:on
x11-common   S:on
xserver-xorg 2:on    3:on    4:on    5:on

Dernière modification par sangmele (Le 01/02/2009, à 14:33)

Hors ligne

#19 Le 01/02/2009, à 16:03

sylvainsjc

Re : xubuntu demarrage trop lent

Je n'ai pas le temps mais plusieurs services pourraient être supprimés

Essaies de voir de ce coté : http://www.foogod.com/z505-linux/

Dernière modification par sylvainsjc (Le 01/02/2009, à 16:04)


ROSA Desktop Fresh KDE 4.13.3 - Une semi-rolling géniale !!!
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
"Il n'est pas donné à tout le monde d'avoir naturellement une bonne orthographe. Il est donné à tout le monde la possibilité de l'améliorer."

Hors ligne

#20 Le 23/01/2014, à 20:06

senga

Re : xubuntu demarrage trop lent

bonjour,

Je déterre un vieux poste car j'ai moi aussi un souci de lenteur au démarrage de xubuntu. Cette lenteur augmente à chaque mise à jour de xubuntu.

J'ai lancé la commande dmesg|more comme spécifié en haut de ce post et ça m'a fait un peu peur!
Il y a pas mal de choses qui semblent disable, ou not supported, ou not available...
Je ne suis pas une pro de l'anglais, encore moins de linux, mais je souhaite comprendre comment ça marche.

Pourriez vous me dire s'il y a des choses aberrantes dans la réponse de cette commande et comment y remédier? J'ai conscience que la lecture de mon post va être longue... et laborieuse...
Je vous en remercie d'avance! wink

Mon pc est un toshiba satellite L655-1JQ
processeur Intel(R) Core(TM) i5 CPU  M 480  2.67GHz
RAM 4Go
carte graphique AMD madison [Mobility Radeon HD 5650/5750 / 6530M/6550M]

résultat de la commande dmesg|more

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-15-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ub
untu8) ) #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=8a915887-6f4a-46f1-98c1-
fdf378011058 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf67ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf756fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf757000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7e2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf7e3000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: TOSHIBA Satellite L655/Portable PC, BIOS 1.90 11/11/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE80000 mask FFFF80000 write-protect
[    0.000000]   2 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 138000000 mask FF8000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[    0.000000]  [mem 0x134000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf67ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbf5fffff] page 2M
[    0.000000]  [mem 0xbf600000-0xbf67ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf6bf000-0xbf756fff]
[    0.000000]  [mem 0xbf6bf000-0xbf756fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7bf000-0xbf7e2fff]
[    0.000000]  [mem 0xbf7bf000-0xbf7e2fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]  [mem 0xbf7ff000-0xbf7fffff] page 4k
[    0.000000] RAMDISK: [mem 0x35eb0000-0x36f4ffff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV)
[    0.000000] ACPI: XSDT 00000000bf7fe120 0007C (v01 TOSINV TOSINV00 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000bf7ee000 0AF35 (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000bf76e000 00040
[    0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000bf7ed000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000bf7ea000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bf7e7000 00110 (v01 INTEL  SataAhci 00001000 INTL 20051117)
[    0.000000] ACPI: ASPT 00000000bf7e5000 00034 (v04 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 00000000bf7e4000 00224 (v01 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bf7e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[    0.000000]   NODE_DATA [mem 0x137ff8000-0x137ffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0xbf67ffff]
[    0.000000]   node   0: [mem 0xbf6bf000-0xbf756fff]
[    0.000000]   node   0: [mem 0xbf7bf000-0xbf7e2fff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x137ffffff]
[    0.000000] On node 0 totalpages: 1013464
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12189 pages used for memmap
[    0.000000]   DMA32 zone: 780093 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf680000-0xbf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf757000-0xbf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7e3000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880137c00000 s86720 r8192 d23872 u262144
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997606
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=8a915887-6f4a-46f
1-98c1-fdf378011058 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3889776K/4053856K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K i
nit, 1420K bss, 164080K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000]     Offload RCU callbacks from all CPUs
[    0.000000]     Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16252928 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.016000] tsc: Unable to calibrate against PIT
[    0.016000] tsc: using HPET reference calibration
[    0.016000] tsc: Detected 2666.632 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.26 BogoMIPS
(lpj=10666528)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000053] AppArmor: AppArmor initialized
[    0.000054] Yama: becoming mindful.
[    0.000332] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001624] Mount-cache hash table entries: 256
[    0.002057] Initializing cgroup subsys memory
[    0.002068] Initializing cgroup subsys devices
[    0.002070] Initializing cgroup subsys freezer
[    0.002071] Initializing cgroup subsys blkio
[    0.002073] Initializing cgroup subsys perf_event
[    0.002075] Initializing cgroup subsys hugetlb
[    0.002095] CPU: Physical Processor ID: 0
[    0.002096] CPU: Processor Core ID: 0
[    0.002101] mce: CPU supports 9 MCE banks
[    0.002110] CPU0: Thermal monitoring handled by SMI
[    0.002120] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.002120] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002120] tlb_flushall_shift: 6
[    0.002219] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.004359] ACPI: Core revision 20130517
[    0.004362] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.004448] ACPI: Forced DSDT copy: length 0x0AF35 copied locally, original unmapped
[    0.014468] ACPI: All ACPI Tables successfully acquired
[    0.037921] ftrace: allocating 27844 entries in 109 pages
[    0.052408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092095] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 480  @ 2.67GHz (fam: 06, model: 25, steppin
g: 05)
[    0.199718] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.199725] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.199728] ... version:                3
[    0.199729] ... bit width:              48
[    0.199730] ... generic registers:      4
[    0.199731] ... value mask:             0000ffffffffffff
[    0.199732] ... max period:             000000007fffffff
[    0.199732] ... fixed-purpose events:   3
[    0.199733] ... event mask:             000000070000000f
[   69.287819] CPU1: Thermal monitoring handled by SMI
[   69.290030] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[   69.301080] CPU2: Thermal monitoring handled by SMI
[   69.314334] CPU3: Thermal monitoring handled by SMI
[    0.201321] smpboot: Booting Node   0, Processors  #1 #2 #3
[   69.316450] Brought up 4 CPUs
[   69.316455] smpboot: Total of 4 processors activated (21333.05 BogoMIPS)
[   69.318974] devtmpfs: initialized
[   69.319946] EVM: security.selinux
[   69.319947] EVM: security.SMACK64
[   69.319948] EVM: security.capability
[   69.320000] PM: Registering ACPI NVS region [mem 0xbf757000-0xbf7befff] (425984 bytes)
[   69.320911] regulator-dummy: no parameters
[   69.320949] RTC time: 18:17:49, date: 01/23/14
[   69.320985] NET: Registered protocol family 16
[   69.321111] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[   69.321113] ACPI: bus type PCI registered
[   69.321115] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   69.321180] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[   69.321183] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[   69.325776] PCI: Using configuration type 1 for base access
[   69.325918] mtrr: your CPUs had inconsistent variable MTRR settings
[   69.325919] mtrr: probably your BIOS does not setup all CPUs.
[   69.325920] mtrr: corrected configuration.
[   69.326587] bio: create slab <bio-0> at 0
[   69.326739] ACPI: Added _OSI(Module Device)
[   69.326741] ACPI: Added _OSI(Processor Device)
[   69.326742] ACPI: Added _OSI(3.0 _SCP Extensions)
[   69.326744] ACPI: Added _OSI(Processor Aggregator Device)
[   69.328375] ACPI: EC: Look up EC in DSDT
[   69.330023] ACPI: Executed 1 blocks of module-level executable AML code
[   69.337941] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[   69.386423] ACPI: SSDT 00000000bf690a18 0046C (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[   69.386803] ACPI: Dynamic OEM Table Load:
[   69.386805] ACPI: SSDT           (null) 0046C (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[   69.386945] ACPI: SSDT 00000000bf68e698 00633 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[   69.387321] ACPI: Dynamic OEM Table Load:
[   69.387323] ACPI: SSDT           (null) 00633 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[   69.394177] ACPI: SSDT 00000000bf68fa98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[   69.394618] ACPI: Dynamic OEM Table Load:
[   69.394620] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[   69.398044] ACPI: SSDT 00000000bf68dd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[   69.398461] ACPI: Dynamic OEM Table Load:
[   69.398463] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[   69.402489] ACPI: Interpreter enabled
[   69.402498] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[   69.402504] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[   69.402525] ACPI: (supports S0 S3 S4 S5)
[   69.402527] ACPI: Using IOAPIC for interrupt routing
[   69.402559] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   69.402663] ACPI: No dock devices found.
[   69.420149] ACPI: Power Resource [FN00] (on)
[   69.421063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[   69.421068] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[   69.421070] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[   69.421689] PCI host bridge to bus 0000:00
[   69.421692] pci_bus 0000:00: root bus resource [bus 00-3e]
[   69.421694] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[   69.421696] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[   69.421698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[   69.421699] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[   69.421708] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[   69.421725] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[   69.421803] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[   69.421836] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   69.421941] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[   69.421971] pci 0000:00:16.0: reg 0x10: [mem 0xd6106100-0xd610610f 64bit]
[   69.422065] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[   69.422166] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[   69.422626] pci 0000:00:1a.0: reg 0x10: [mem 0xd6105c00-0xd6105fff]
[   69.425320] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[   69.425419] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[   69.425440] pci 0000:00:1b.0: reg 0x10: [mem 0xd6100000-0xd6103fff 64bit]
[   69.425538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[   69.425597] pci 0000:00:1b.0: System wakeup disabled by ACPI
[   69.425631] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[   69.425731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[   69.425792] pci 0000:00:1c.0: System wakeup disabled by ACPI
[   69.425826] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[   69.425924] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[   69.425985] pci 0000:00:1c.1: System wakeup disabled by ACPI
[   69.426022] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[   69.426120] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[   69.426181] pci 0000:00:1c.4: System wakeup disabled by ACPI
[   69.426224] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[   69.426681] pci 0000:00:1d.0: reg 0x10: [mem 0xd6105800-0xd6105bff]
[   69.429370] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[   69.437436] pci 0000:00:1d.0: System wakeup disabled by ACPI
[   69.437472] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[   69.437591] pci 0000:00:1e.0: System wakeup disabled by ACPI
[   69.437627] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[   69.437814] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[   69.437841] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[   69.437852] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[   69.437863] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[   69.437873] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[   69.437884] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[   69.437895] pci 0000:00:1f.2: reg 0x24: [mem 0xd6105000-0xd61057ff]
[   69.437961] pci 0000:00:1f.2: PME# supported from D3hot
[   69.438047] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[   69.438068] pci 0000:00:1f.3: reg 0x10: [mem 0xd6106000-0xd61060ff 64bit]
[   69.438097] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[   69.438202] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[   69.438230] pci 0000:00:1f.6: reg 0x10: [mem 0xd6104000-0xd6104fff 64bit]
[   69.438429] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[   69.438445] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[   69.438457] pci 0000:01:00.0: reg 0x18: [mem 0xd6000000-0xd601ffff 64bit]
[   69.438465] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[   69.438479] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[   69.438510] pci 0000:01:00.0: supports D1 D2
[   69.438550] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[   69.438565] pci 0000:01:00.1: reg 0x10: [mem 0xd6020000-0xd6023fff 64bit]
[   69.438622] pci 0000:01:00.1: supports D1 D2
[   69.438673] pci 0000:00:01.0: PCI bridge to [bus 01]
[   69.438675] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[   69.438678] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd60fffff]
[   69.438681] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[   69.438773] pci 0000:02:00.0: [1969:2060] type 00 class 0x020000
[   69.438801] pci 0000:02:00.0: reg 0x10: [mem 0xd5000000-0xd503ffff 64bit]
[   69.438818] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x307f]
[   69.438955] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   69.438989] pci 0000:02:00.0: System wakeup disabled by ACPI
[   69.448455] pci 0000:00:1c.0: PCI bridge to [bus 02]
[   69.448463] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[   69.448471] pci 0000:00:1c.0:   bridge window [mem 0xd5000000-0xd5ffffff]
[   69.448481] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[   69.448583] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[   69.448600] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[   69.448612] pci 0000:03:00.0: reg 0x14: [mem 0xd4000000-0xd4003fff]
[   69.448716] pci 0000:03:00.0: supports D1 D2
[   69.448717] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[   69.448745] pci 0000:03:00.0: System wakeup disabled by ACPI
[   69.456448] pci 0000:00:1c.1: PCI bridge to [bus 03]
[   69.456456] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[   69.456463] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff]
[   69.456473] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[   69.456583] acpiphp: Slot [1] registered
[   69.456590] pci 0000:00:1c.4: PCI bridge to [bus 20-22]
[   69.456595] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[   69.456600] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff]
[   69.456607] pci 0000:00:1c.4:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[   69.456690] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[   69.456703] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[   69.456705] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[   69.456706] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[   69.456708] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[   69.457057] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   69.457108] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   69.457159] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   69.457208] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[   69.457257] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   69.457305] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   69.457354] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   69.457402] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   69.457467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[   69.457471] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[   69.457472] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[   69.457529] PCI host bridge to bus 0000:3f
[   69.457531] pci_bus 0000:3f: root bus resource [bus 3f]
[   69.457536] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
[   69.457572] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[   69.457610] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[   69.457644] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[   69.457677] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[   69.457712] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[   69.458128] ACPI: Enabled 15 GPEs in block 00 to 3F
[   69.458135] ACPI: \_SB_.PCI0: notify handler is installed
[   69.458173] ACPI: \_SB_.CPBG: notify handler is installed
[   69.458186] Found 2 acpi root devices
[   69.458287] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[   69.458290] vgaarb: loaded
[   69.458291] vgaarb: bridge control possible 0000:01:00.0
[   69.458441] SCSI subsystem initialized
[   69.458443] ACPI: bus type ATA registered
[   69.458503] libata version 3.00 loaded.
[   69.458520] ACPI: bus type USB registered
[   69.458534] usbcore: registered new interface driver usbfs
[   69.458542] usbcore: registered new interface driver hub
[   69.458563] usbcore: registered new device driver usb
[   69.458663] PCI: Using ACPI for IRQ routing
[   69.460915] PCI: pci_cache_line_size set to 64 bytes
[   69.460981] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
[   69.460983] e820: reserve RAM buffer [mem 0xbf680000-0xbfffffff]
[   69.460985] e820: reserve RAM buffer [mem 0xbf757000-0xbfffffff]
[   69.460986] e820: reserve RAM buffer [mem 0xbf7e3000-0xbfffffff]
[   69.460987] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[   69.461077] NetLabel: Initializing
[   69.461078] NetLabel:  domain hash size = 128
[   69.461079] NetLabel:  protocols = UNLABELED CIPSOv4
[   69.461089] NetLabel:  unlabeled traffic allowed by default
[   69.461162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[   69.461167] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[   69.463194] Switched to clocksource hpet
[   69.467704] AppArmor: AppArmor Filesystem Enabled
[   69.467740] pnp: PnP ACPI init
[   69.467754] ACPI: bus type PNP registered
[   69.467982] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[   69.468015] pnp 00:01: Plug and Play ACPI device, IDs TOS0100 SYN1900 SYN0002 PNP0f13 (active)
[   69.468051] pnp 00:02: [dma 4]
[   69.468066] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[   69.468086] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[   69.468192] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[   69.468219] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[   69.468244] pnp 00:06: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io  0x100
0-0x1fff]
[   69.468279] system 00:06: [io  0x0680-0x069f] has been reserved
[   69.468281] system 00:06: [io  0x0800-0x080f] has been reserved
[   69.468283] system 00:06: [io  0x0810-0x0813] has been reserved
[   69.468285] system 00:06: [io  0xffff] has been reserved
[   69.468287] system 00:06: [io  0x0400-0x047f] could not be reserved
[   69.468289] system 00:06: [io  0x0500-0x057f] has been reserved
[   69.468292] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[   69.468317] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[   69.468573] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[   69.468576] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[   69.468578] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[   69.468579] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[   69.468581] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[   69.468583] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[   69.468585] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[   69.468587] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[   69.468589] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[   69.468591] system 00:08: [mem 0xd6200000-0xd6200fff] has been reserved
[   69.468592] system 00:08: [mem 0xff800000-0xffffffff] could not be reserved
[   69.468595] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[   69.468732] pnp: PnP ACPI: found 9 devices
[   69.468733] ACPI: bus type PNP unregistered
[   69.475186] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[   69.475245] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6040000-0xd605ffff pref]
[   69.475249] pci 0000:00:01.0: PCI bridge to [bus 01]
[   69.475251] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[   69.475254] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd60fffff]
[   69.475257] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[   69.475260] pci 0000:00:1c.0: PCI bridge to [bus 02]
[   69.475263] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[   69.475269] pci 0000:00:1c.0:   bridge window [mem 0xd5000000-0xd5ffffff]
[   69.475274] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[   69.475281] pci 0000:00:1c.1: PCI bridge to [bus 03]
[   69.475284] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[   69.475290] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff]
[   69.475294] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[   69.475300] pci 0000:00:1c.4: PCI bridge to [bus 20-22]
[   69.475304] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[   69.475309] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff]
[   69.475314] pci 0000:00:1c.4:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[   69.475321] pci 0000:00:1e.0: PCI bridge to [bus 04]
[   69.475644] pci 0000:00:1e.0: setting latency timer to 64
[   69.475649] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[   69.475651] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[   69.475652] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[   69.475654] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[   69.475656] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[   69.475658] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd60fffff]
[   69.475659] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[   69.475661] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[   69.475663] pci_bus 0000:02: resource 1 [mem 0xd5000000-0xd5ffffff]
[   69.475665] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[   69.475666] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[   69.475668] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd4ffffff]
[   69.475670] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[   69.475671] pci_bus 0000:20: resource 0 [io  0x1000-0x1fff]
[   69.475673] pci_bus 0000:20: resource 1 [mem 0xd3000000-0xd3ffffff]
[   69.475674] pci_bus 0000:20: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
[   69.475676] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[   69.475678] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[   69.475680] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[   69.475681] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[   69.475714] NET: Registered protocol family 2
[   69.475894] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[   69.476025] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[   69.476127] TCP: Hash tables configured (established 32768 bind 32768)
[   69.476160] TCP: reno registered
[   69.476168] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[   69.476185] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[   69.476259] NET: Registered protocol family 1
[   69.507348] pci 0000:01:00.0: Boot video device
[   69.507367] PCI: CLS 64 bytes, default 64
[   69.507418] Trying to unpack rootfs image as initramfs...
[   69.778750] Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
[   69.778757] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   69.778760] software IO TLB [mem 0xbb680000-0xbf680000] (64MB) mapped at [ffff8800bb680000-ffff8800bf67
ffff]
[   69.778805] Simple Boot Flag at 0x44 set to 0x1
[   69.778987] Scanning for low memory corruption every 60 seconds
[   69.779320] Initialise module verification
[   69.779365] audit: initializing netlink socket (disabled)
[   69.779382] type=2000 audit(1390500999.664:1): initialized
[   69.803095] bounce pool size: 64 pages
[   69.803105] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   69.804175] zbud: loaded
[   69.804311] VFS: Disk quotas dquot_6.5.2
[   69.804351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   69.804800] fuse init (API version 7.22)
[   69.804863] msgmni has been set to 7630
[   69.805449] Key type asymmetric registered
[   69.805453] Asymmetric key parser 'x509' registered
[   69.805483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[   69.805531] io scheduler noop registered
[   69.805533] io scheduler deadline registered (default)
[   69.805558] io scheduler cfq registered
[   69.805653] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[   69.805843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   69.805855] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   69.805901] intel_idle: MWAIT substates: 0x1120
[   69.805902] intel_idle: v0.4 model 0x25
[   69.805903] intel_idle: lapic_timer_reliable_states 0xffffffff
[   69.806071] ACPI: AC Adapter [ADP0] (on-line)
[   69.806200] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C0C:00/input
/input0
[   69.806205] ACPI: Power Button [PWRB]
[   69.806234] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C0D:00/input/i
nput1
[   69.808074] ACPI: Lid Switch [LID0]
[   69.808110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   69.808113] ACPI: Power Button [PWRF]
[   69.808159] ACPI: Fan [FAN] (on)
[   69.808206] ACPI: Requesting acpi_cpufreq
[   69.809559] thermal LNXTHERM:00: registered as thermal_zone0
[   69.809562] ACPI: Thermal Zone [THRM] (62 C)
[   69.809583] GHES: HEST is not enabled!
[   69.809672] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[   69.810325] ACPI: Battery Slot [BAT0] (battery present)
[   69.811190] Linux agpgart interface v0.103
[   69.812410] brd: module loaded
[   69.813011] loop: module loaded
[   69.813291] libphy: Fixed MDIO Bus: probed
[   69.813353] tun: Universal TUN/TAP device driver, 1.6
[   69.813354] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   69.813394] PPP generic driver version 2.4.2
[   69.813434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   69.813436] ehci-pci: EHCI PCI platform driver
[   69.813554] ehci-pci 0000:00:1a.0: setting latency timer to 64
[   69.813565] ehci-pci 0000:00:1a.0: EHCI Host Controller
[   69.813571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   69.813586] ehci-pci 0000:00:1a.0: debug port 2
[   69.817518] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[   69.817536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd6105c00
[   69.827216] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   69.827239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   69.827241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   69.827243] usb usb1: Product: EHCI Host Controller
[   69.827244] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[   69.827246] usb usb1: SerialNumber: 0000:00:1a.0
[   69.827342] hub 1-0:1.0: USB hub found
[   69.827347] hub 1-0:1.0: 3 ports detected
[   69.827517] ehci-pci 0000:00:1d.0: setting latency timer to 64
[   69.827523] ehci-pci 0000:00:1d.0: EHCI Host Controller
[   69.827528] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   69.827542] ehci-pci 0000:00:1d.0: debug port 2
[   69.831464] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[   69.831481] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd6105800
[   69.843210] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   69.843222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   69.843223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   69.843225] usb usb2: Product: EHCI Host Controller
[   69.843226] usb usb2: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[   69.843228] usb usb2: SerialNumber: 0000:00:1d.0
[   69.843319] hub 2-0:1.0: USB hub found
[   69.843322] hub 2-0:1.0: 3 ports detected
[   69.843402] ehci-platform: EHCI generic platform driver
[   69.843408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   69.843409] ohci-pci: OHCI PCI platform driver
[   69.843416] ohci-platform: OHCI generic platform driver
[   69.843421] uhci_hcd: USB Universal Host Controller Interface driver
[   69.843468] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   69.873268] serio: i8042 KBD port at 0x60,0x64 irq 1
[   69.873273] serio: i8042 AUX port at 0x60,0x64 irq 12
[   69.873389] mousedev: PS/2 mouse device common for all mice
[   69.874463] rtc_cmos 00:07: RTC can wake from S4
[   69.874600] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[   69.874632] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   69.874683] device-mapper: uevent: version 1.0.3
[   69.874748] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[   69.874813] cpuidle: using governor ladder
[   69.874894] cpuidle: using governor menu
[   69.874903] ledtrig-cpu: registered to indicate activity on CPUs
[   69.874982] TCP: cubic registered
[   69.875059] NET: Registered protocol family 10
[   69.875248] NET: Registered protocol family 17
[   69.875257] Key type dns_resolver registered
[   69.875518] PM: Hibernation image not present or could not be loaded.
[   69.875522] Loading module verification certificates
[   69.876427] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9da89dd2daeca3a3cb171fe18502208f132ad
ef8'
[   69.876440] registered taskstats version 1
[   69.878487] Key type trusted registered
[   69.881711] Key type encrypted registered
[   69.885431] AppArmor: AppArmor sha1 policy hashing enabled
[   69.886038]   Magic number: 14:326:292
[   69.886083] tty tty25: hash matches
[   69.886225] rtc_cmos 00:07: setting system clock to 2014-01-23 18:17:49 UTC (1390501069)
[   69.892148] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   69.892150] EDD information not available.
[   69.893119] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[   69.893122] Write protecting the kernel read-only data: 12288k
[   69.895072] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
[   69.896496] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[   69.906140] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   69.909589] systemd-udevd[123]: starting version 204
[   69.933678] ahci 0000:00:1f.2: version 3.0
[   69.933881] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[   69.933927] ahci: SSS flag set, parallel bus scan disabled
[   69.933976] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[   69.933981] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[   69.933987] ahci 0000:00:1f.2: setting latency timer to 64
[   69.947713] scsi0 : ahci
[   69.947809] scsi1 : ahci
[   69.947883] scsi2 : ahci
[   69.947949] scsi3 : ahci
[   69.948025] scsi4 : ahci
[   69.948100] scsi5 : ahci
[   69.948227] ata1: DUMMY
[   69.948231] ata2: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105180 irq 41
[   69.948232] ata3: DUMMY
[   69.948233] ata4: DUMMY
[   69.948236] ata5: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105300 irq 41
[   69.948238] ata6: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105380 irq 41
[   69.959719] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[   70.139293] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   70.267304] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   70.271661] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[   70.271666] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   70.272079] hub 1-1:1.0: USB hub found
[   70.272214] hub 1-1:1.0: 6 ports detected
[   70.383332] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   70.515684] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[   70.515690] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   70.516055] hub 2-1:1.0: USB hub found
[   70.516248] hub 2-1:1.0: 8 ports detected
[   70.587481] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[   70.650187] ata2.00: ATA-8: TOSHIBA MK7559GSXP, GN001M, max UDMA/100
[   70.650192] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   70.651289] ata2.00: configured for UDMA/100
[   70.651653] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MK7559GS GN00 PQ: 0 ANSI: 5
[   70.651865] sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[   70.651876] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   70.651928] sd 1:0:0:0: [sda] Write Protect is off
[   70.651933] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   70.651952] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.741174]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[   70.741801] sd 1:0:0:0: [sda] Attached SCSI disk
[   70.775256] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[   70.971220] ata5: SATA link down (SStatus 0 SControl 300)
[   71.291223] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   71.293109] ata6.00: ATAPI: Optiarc DVD RW AD-7710H, 1.T0, max UDMA/100
[   71.295266] ata6.00: configured for UDMA/100
[   71.297204] scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.T0 PQ: 0 ANSI: 5
[   71.300952] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   71.300957] cdrom: Uniform CD-ROM driver Revision: 3.20
[   71.301117] sr 5:0:0:0: Attached scsi CD-ROM sr0
[   71.301194] sr 5:0:0:0: Attached scsi generic sg1 type 5
[   71.775381] Switched to clocksource tsc
[   71.908263] usb 1-1.3: New USB device found, idVendor=10f1, idProduct=1a2a
[   71.908271] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[   71.908275] usb 1-1.3: Product: USB Camera
[   71.908278] usb 1-1.3: Manufacturer: Generic
[   71.908282] usb 1-1.3: SerialNumber: MU418ASA
[   71.991371] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[   71.995867] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   72.087135] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f
[   72.087143] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   72.087147] usb 2-1.1: Product: USB Receiver
[   72.087151] usb 2-1.1: Manufacturer: Logitech
[   72.159421] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[   72.254600] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
[   72.254605] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   72.254607] usb 2-1.2: Product: SAMSUNG_Android
[   72.254608] usb 2-1.2: Manufacturer: SAMSUNG
[   72.254610] usb 2-1.2: SerialNumber: 000e8eee3bae11
[   84.189111] Adding 4046844k swap on /dev/sda7.  Priority:-1 extents:1 across:4046844k FS
[   84.290792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   84.350444] systemd-udevd[303]: starting version 204
[   84.480296] lp: driver loaded but no devices found
[   84.484359] mei_me 0000:00:16.0: setting latency timer to 64
[   84.484414] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   84.511572] wmi: Mapper loaded
[   84.514648] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[   84.517443] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   84.517448] AMD IOMMUv2 functionality not available on this system
[   84.525615] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints
kernel.
[   84.525619] Disabling lock debugging due to kernel taint
[   84.531991] input: Toshiba input device as /devices/virtual/input/input4
[   84.723758] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[   84.726573] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1
(20130517/utaddress-251)
[   84.726583] ACPI: If an ACPI driver is available for this device, you should use it instead of the nati
ve driver
[   84.726587] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1
(20130517/utaddress-251)
[   84.726591] ACPI: If an ACPI driver is available for this device, you should use it instead of the nati
ve driver
[   84.726593] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1
(20130517/utaddress-251)
[   84.726597] ACPI: If an ACPI driver is available for this device, you should use it instead of the nati
ve driver
[   84.726598] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1
(20130517/utaddress-251)
[   84.726602] ACPI: If an ACPI driver is available for this device, you should use it instead of the nati
ve driver
[   84.726603] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   84.729106] cfg80211: Calling CRDA to update world regulatory domain
[   84.730609] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   84.731818] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3658 MBytes.
[   84.732012] <6>[fglrx]   vendor: 1002 device: 68c1 count: 1
[   84.732293] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[   84.749139] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 load
s
[   84.749232] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   84.749972] <6>[fglrx] Kernel PAT support is enabled
[   84.749999] <6>[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
[   84.755226] acpi device:04: registered as cooling_device5
[   84.755290] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   84.755344] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/i
nput5
[   84.777640] rtl8192se: FW Power Save off (module option)
[   84.777693] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[   84.777693] Loading firmware rtlwifi/rtl8192sefw.bin
[   84.778139] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   84.779508] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   84.795744] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   84.795750] hda-intel 0000:01:00.1: Using LPIB position fix
[   84.795807] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   84.802133] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   84.818755] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/soun
d/card1/input6
[   84.861452] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   84.912694] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   84.913273] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   84.913911] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   84.914484] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   84.933084] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   84.942691] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   84.963385] type=1400 audit(1390497484.576:2): apparmor="STATUS" operation="profile_load" parent=349 pr
ofile="unconfined" name="/sbin/dhclient" pid=404 comm="apparmor_parser"
[   84.963395] type=1400 audit(1390497484.576:3): apparmor="STATUS" operation="profile_load" parent=349 pr
ofile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser"
[   84.963401] type=1400 audit(1390497484.576:4): apparmor="STATUS" operation="profile_load" parent=349 pr
ofile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser"
[   84.963502] type=1400 audit(1390497484.576:5): apparmor="STATUS" operation="profile_replace" parent=375
profile="unconfined" name="/sbin/dhclient" pid=403 comm="apparmor_parser"
[   84.963512] type=1400 audit(1390497484.576:6): apparmor="STATUS" operation="profile_replace" parent=375
profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
[   84.963518] type=1400 audit(1390497484.576:7): apparmor="STATUS" operation="profile_replace" parent=375
profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
[   84.963873] type=1400 audit(1390497484.576:8): apparmor="STATUS" operation="profile_replace" parent=349
profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser"
[   84.963878] type=1400 audit(1390497484.576:9): apparmor="STATUS" operation="profile_replace" parent=349
profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser"
[   84.964007] type=1400 audit(1390497484.576:10): apparmor="STATUS" operation="profile_replace" parent=41
5 profile="unconfined" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
[   84.964014] type=1400 audit(1390497484.576:11): apparmor="STATUS" operation="profile_replace" parent=41
5 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[   85.029892] cfg80211: World regulatory domain updated:
[   85.029896] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   85.029898] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   85.029900] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   85.029901] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   85.029902] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   85.029903] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   85.236237] hidraw: raw HID events driver (C) Jiri Kosina
[   85.238198] Linux video capture interface: v2.00
[   85.241146] usbcore: registered new interface driver usbhid
[   85.241149] usbhid: USB HID core driver
[   85.244304] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/i
nput/input7
[   85.244771] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver]
on usb-0000:00:1d.0-1.1/input0
[   85.246555] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/i
nput/input8
[   85.248172] uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
[   85.248999] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB
Receiver] on usb-0000:00:1d.0-1.1/input1
[   85.265214] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
[   85.265349] usbcore: registered new interface driver uvcvideo
[   85.265351] USB Video Class driver (1.1.1)
[   85.435434] init: failsafe main process (581) killed by TERM signal
[   85.691390] Bluetooth: Core ver 2.16
[   85.691412] NET: Registered protocol family 31
[   85.691414] Bluetooth: HCI device and connection manager initialized
[   85.691424] Bluetooth: HCI socket layer initialized
[   85.691425] Bluetooth: L2CAP socket layer initialized
[   85.691430] Bluetooth: SCO socket layer initialized
[   85.694916] Bluetooth: RFCOMM TTY layer initialized
[   85.694929] Bluetooth: RFCOMM socket layer initialized
[   85.694931] Bluetooth: RFCOMM ver 1.11
[   85.841874] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   85.841878] Bluetooth: BNEP filters: protocol multicast
[   85.841890] Bluetooth: BNEP socket layer initialized
[   85.865824] init: avahi-cups-reload main process (687) terminated with status 1
[   85.887051] ppdev: user-space parallel port driver
[   85.981905] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000
/0xa0000, board id: 3655, fw id: 582762
[   85.981915] psmouse serio1: synaptics: Toshiba Satellite L655 detected, limiting rate to 40pps.
[   86.056913] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   86.430428] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   86.445020] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   86.450542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   86.608567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   86.611453] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   87.610593] init: plymouth-stop pre-start process (985) terminated with status 1
[   88.351719] wlan0: authenticate with 40:5a:9b:b1:14:fe
[   88.371215] wlan0: send auth to 40:5a:9b:b1:14:fe (try 1/3)
[   88.466336] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[   88.466341] vesafb: scrolling: redraw
[   88.466343] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   88.467907] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004b00000, using 3072k, total 3072k
[   88.468127] Console: switching to colour frame buffer device 128x48
[   88.469985] fb0: VESA VGA frame buffer device
[   88.475217] wlan0: send auth to 40:5a:9b:b1:14:fe (try 2/3)
[   88.514989] init: plymouth-splash main process (1028) terminated with status 1
[   88.579217] wlan0: send auth to 40:5a:9b:b1:14:fe (try 3/3)
[   88.683227] wlan0: authentication with 40:5a:9b:b1:14:fe timed out
[   88.816162] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   88.816824] <6>[fglrx] Firegl kernel thread PID: 1039
[   88.817029] <6>[fglrx] Firegl kernel thread PID: 1040
[   88.817230] <6>[fglrx] Firegl kernel thread PID: 1041
[   88.817410] <6>[fglrx] IRQ 46 Enabled
[   88.841278] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   88.841280] <6>[fglrx] Reserved FB block: Unshared offset:f8ca000, size:436000
[   88.841282] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[   89.659600] wlan0: authenticate with 40:5a:9b:b1:14:fe
[   89.679373] wlan0: send auth to 40:5a:9b:b1:14:fe (try 1/3)
[   89.783210] wlan0: send auth to 40:5a:9b:b1:14:fe (try 2/3)
[   89.785293] wlan0: authenticated
[   89.787218] wlan0: associate with 40:5a:9b:b1:14:fe (try 1/3)
[   89.891215] wlan0: associate with 40:5a:9b:b1:14:fe (try 2/3)
[   89.894832] wlan0: RX AssocResp from 40:5a:9b:b1:14:fe (capab=0x431 status=0 aid=1)
[   89.896567] wlan0: associated
[   89.906526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   89.906774] cfg80211: Calling CRDA for country: FR
[   89.909318] cfg80211: Regulatory domain changed to country: FR
[   89.909323] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   89.909326] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   89.909329] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   89.909330] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   89.909332] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   89.909333] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)

Hors ligne

Haut de page ↑