Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 12/02/2014, à 16:38

fatju

carte graphique geforce 210 détecter mais ne fonctionne pas

bonjour,

ça fais plusieurs jours que j'essaie d'installer la carte graphique geforce 210 pour mon ordi.
elle est reconnue mais je n'arrive pas à basculer de la carte graphique de la carte mère à la carte graphique supplémentaire.

sudo gedit /etc/X11/xorg.conf

** (gedit:2338): WARNING **: Could not load Gedit repository: Typelib file for namespace 'GtkSource', version '3.0' not found

(gedit:2338): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
[    23.819] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    23.819] X Protocol Version 11, Revision 0
[    23.819] Build Operating System: Linux 3.2.0-54-generic i686 Ubuntu
[    23.819] Current Operating System: Linux ordi 3.11.0-17-generic #31-Ubuntu SMP Mon Feb 3 21:53:31 UTC 2014 i686
[    23.819] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic root=UUID=2f5ef3d3-52b5-40bb-a24c-5a29404fbc5c ro quiet splash
[    23.819] Build Date: 17 December 2013  10:03:52AM
[    23.819] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support) 
[    23.819] Current version of pixman: 0.30.2
[    23.819] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.819] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.820] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 12 16:19:22 2014
[    23.839] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.839] (==) No Layout section.  Using the first Screen section.
[    23.839] (==) No screen section available. Using defaults.
[    23.839] (**) |-->Screen "Default Screen Section" (0)
[    23.839] (**) |   |-->Monitor "<default monitor>"
[    23.839] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    23.839] (==) Automatically adding devices
[    23.839] (==) Automatically enabling devices
[    23.839] (==) Automatically adding GPU devices
[    23.840] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.840] 	Entry deleted from font path.
[    23.840] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.840] 	Entry deleted from font path.
[    23.840] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.840] 	Entry deleted from font path.
[    23.840] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.840] 	Entry deleted from font path.
[    23.840] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.840] 	Entry deleted from font path.
[    23.840] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    23.840] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.840] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.840] (II) Loader magic: 0xb77996a0
[    23.840] (II) Module ABI versions:
[    23.840] 	X.Org ANSI C Emulation: 0.4
[    23.840] 	X.Org Video Driver: 14.1
[    23.840] 	X.Org XInput driver : 19.1
[    23.840] 	X.Org Server Extension : 7.0
[    23.841] (--) PCI:*(0:0:5:0) 10de:0241:1734:10c5 rev 162, Mem @ 0xf3000000/16777216, 0xd0000000/268435456, 0xf2000000/16777216, BIOS @ 0x????????/131072
[    23.841] (--) PCI: (0:3:0:0) 10de:0a65:1462:8094 rev 162, Mem @ 0xf4000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[    23.842] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.842] Initializing built-in extension Generic Event Extension
[    23.842] Initializing built-in extension SHAPE
[    23.842] Initializing built-in extension MIT-SHM
[    23.842] Initializing built-in extension XInputExtension
[    23.842] Initializing built-in extension XTEST
[    23.842] Initializing built-in extension BIG-REQUESTS
[    23.842] Initializing built-in extension SYNC
[    23.842] Initializing built-in extension XKEYBOARD
[    23.842] Initializing built-in extension XC-MISC
[    23.842] Initializing built-in extension SECURITY
[    23.842] Initializing built-in extension XINERAMA
[    23.842] Initializing built-in extension XFIXES
[    23.842] Initializing built-in extension RENDER
[    23.842] Initializing built-in extension RANDR
[    23.842] Initializing built-in extension COMPOSITE
[    23.842] Initializing built-in extension DAMAGE
[    23.842] Initializing built-in extension MIT-SCREEN-SAVER
[    23.842] Initializing built-in extension DOUBLE-BUFFER
[    23.842] Initializing built-in extension RECORD
[    23.842] Initializing built-in extension DPMS
[    23.842] Initializing built-in extension X-Resource
[    23.842] Initializing built-in extension XVideo
[    23.842] Initializing built-in extension XVideo-MotionCompensation
[    23.842] Initializing built-in extension SELinux
[    23.842] Initializing built-in extension XFree86-VidModeExtension
[    23.842] Initializing built-in extension XFree86-DGA
[    23.842] Initializing built-in extension XFree86-DRI
[    23.842] Initializing built-in extension DRI2
[    23.842] (II) "glx" will be loaded by default.
[    23.842] (WW) "xmir" is not to be loaded by default. Skipping.
[    23.842] (II) LoadModule: "dri2"
[    23.842] (II) Module "dri2" already built-in
[    23.842] (II) LoadModule: "glamoregl"
[    23.842] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    23.936] (II) Module glamoregl: vendor="X.Org Foundation"
[    23.937] 	compiled for 1.14.3, module version = 0.5.1
[    23.937] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    23.937] (II) LoadModule: "glx"
[    23.937] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[    23.965] (II) Module glx: vendor="NVIDIA Corporation"
[    23.965] 	compiled for 4.0.2, module version = 1.0.0
[    23.965] 	Module class: X.Org Server Extension
[    23.965] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:51:59 PDT 2013
[    23.965] Loading extension GLX
[    23.965] (==) Matched nvidia as autoconfigured driver 0
[    23.965] (==) Matched nouveau as autoconfigured driver 1
[    23.965] (==) Matched vesa as autoconfigured driver 2
[    23.965] (==) Matched modesetting as autoconfigured driver 3
[    23.965] (==) Matched fbdev as autoconfigured driver 4
[    23.965] (==) Assigned the driver to the xf86ConfigLayout
[    23.965] (II) LoadModule: "nvidia"
[    23.965] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    23.969] (II) Module nvidia: vendor="NVIDIA Corporation"
[    23.969] 	compiled for 4.0.2, module version = 1.0.0
[    23.970] 	Module class: X.Org Video Driver
[    23.970] (II) LoadModule: "nouveau"
[    23.989] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    23.991] (II) Module nouveau: vendor="X.Org Foundation"
[    23.991] 	compiled for 1.14.2.901, module version = 1.0.9
[    23.991] 	Module class: X.Org Video Driver
[    23.991] 	ABI class: X.Org Video Driver, version 14.1
[    23.991] (II) LoadModule: "vesa"
[    23.992] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.994] (II) Module vesa: vendor="X.Org Foundation"
[    23.994] 	compiled for 1.14.1, module version = 2.3.2
[    23.994] 	Module class: X.Org Video Driver
[    23.994] 	ABI class: X.Org Video Driver, version 14.1
[    23.994] (II) LoadModule: "modesetting"
[    23.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.996] (II) Module modesetting: vendor="X.Org Foundation"
[    23.996] 	compiled for 1.14.1, module version = 0.8.0
[    23.996] 	Module class: X.Org Video Driver
[    23.996] 	ABI class: X.Org Video Driver, version 14.1
[    23.996] (II) LoadModule: "fbdev"
[    23.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.998] (II) Module fbdev: vendor="X.Org Foundation"
[    23.998] 	compiled for 1.14.1, module version = 0.4.3
[    23.998] 	Module class: X.Org Video Driver
[    23.999] 	ABI class: X.Org Video Driver, version 14.1
[    23.999] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:32:42 PDT 2013
[    23.999] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    23.999] (II) NOUVEAU driver Date:   Wed Jul 31 10:51:03 2013 +1000
[    23.999] (II) NOUVEAU driver for NVIDIA chipset families :
[    23.999] 	RIVA TNT        (NV04)
[    23.999] 	RIVA TNT2       (NV05)
[    23.999] 	GeForce 256     (NV10)
[    23.999] 	GeForce 2       (NV11, NV15)
[    23.999] 	GeForce 4MX     (NV17, NV18)
[    23.999] 	GeForce 3       (NV20)
[    23.999] 	GeForce 4Ti     (NV25, NV28)
[    23.999] 	GeForce FX      (NV3x)
[    23.999] 	GeForce 6       (NV4x)
[    23.999] 	GeForce 7       (G7x)
[    23.999] 	GeForce 8       (G8x)
[    23.999] 	GeForce GTX 200 (NVA0)
[    23.999] 	GeForce GTX 400 (NVC0)
[    23.999] (II) VESA: driver for VESA chipsets: vesa
[    23.999] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.999] (II) FBDEV: driver for framebuffer: fbdev
[    23.999] (++) using VT number 7

[    24.005] (II) Loading sub module "fb"
[    24.005] (II) LoadModule: "fb"
[    24.006] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.007] (II) Module fb: vendor="X.Org Foundation"
[    24.007] 	compiled for 1.14.5, module version = 1.0.0
[    24.007] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.007] (II) Loading sub module "wfb"
[    24.007] (II) LoadModule: "wfb"
[    24.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.010] (II) Module wfb: vendor="X.Org Foundation"
[    24.010] 	compiled for 1.14.5, module version = 1.0.0
[    24.010] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.010] (II) Loading sub module "ramdac"
[    24.010] (II) LoadModule: "ramdac"
[    24.010] (II) Module "ramdac" already built-in
[    24.010] (WW) Falling back to old probe method for vesa
[    24.010] (WW) Falling back to old probe method for modesetting
[    24.010] (EE) open /dev/dri/card0: No such file or directory
[    24.010] (WW) Falling back to old probe method for fbdev
[    24.010] (II) Loading sub module "fbdevhw"
[    24.010] (II) LoadModule: "fbdevhw"
[    24.010] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    24.012] (II) Module fbdevhw: vendor="X.Org Foundation"
[    24.012] 	compiled for 1.14.5, module version = 0.0.2
[    24.012] 	ABI class: X.Org Video Driver, version 14.1
[    24.013] (EE) open /dev/fb0: No such file or directory
[    24.013] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    24.013] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    24.013] (==) NVIDIA(0): RGB weight 888
[    24.013] (==) NVIDIA(0): Default visual is TrueColor
[    24.013] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.013] (**) NVIDIA(0): Enabling 2D acceleration
[    24.693] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    24.693] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    24.694] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
[    24.694] (--) NVIDIA(0): Memory: 262144 kBytes
[    24.694] (--) NVIDIA(0): VideoBIOS: 05.51.28.39.19
[    24.694] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    24.694] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
[    24.694] (--) NVIDIA(0):     LG Electronics IPS231 (CRT-0) (connected)
[    24.694] (--) NVIDIA(0):     DFP-0
[    24.694] (--) NVIDIA(0): LG Electronics IPS231 (CRT-0): 350.0 MHz maximum pixel clock
[    24.694] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
[    24.694] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    24.694] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    24.694] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    24.694] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    24.694] (==) NVIDIA(0): 
[    24.694] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    24.694] (==) NVIDIA(0):     will be used as the requested mode.
[    24.694] (==) NVIDIA(0): 
[    24.694] (II) NVIDIA(0): Validated MetaModes:
[    24.694] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    24.694] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    24.695] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +0
[    24.696] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    24.696] (--) NVIDIA(0):     option
[    24.696] (II) UnloadModule: "nouveau"
[    24.696] (II) Unloading nouveau
[    24.696] (II) UnloadModule: "vesa"
[    24.696] (II) Unloading vesa
[    24.697] (II) UnloadModule: "modesetting"
[    24.697] (II) Unloading modesetting
[    24.697] (II) UnloadModule: "fbdev"
[    24.697] (II) Unloading fbdev
[    24.698] (II) UnloadSubModule: "fbdevhw"
[    24.698] (II) Unloading fbdevhw
[    24.698] (--) Depth 24 pixmap format is 32 bpp
[    25.441] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 210 (GT218) at PCI:3:0:0 (GPU-1)
[    25.441] (--) NVIDIA(GPU-1): Memory: 1048576 kBytes
[    25.441] (--) NVIDIA(GPU-1): VideoBIOS: 70.18.49.00.00
[    25.441] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[    25.441] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[    25.441] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce 210 at PCI:3:0:0
[    25.441] (--) NVIDIA(GPU-1):     CRT-0
[    25.441] (--) NVIDIA(GPU-1):     CRT-1
[    25.441] (--) NVIDIA(GPU-1):     DFP-0
[    25.441] (--) NVIDIA(GPU-1):     DFP-1
[    25.441] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[    25.441] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
[    25.441] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[    25.441] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[    25.441] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[    25.441] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[    25.446] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    25.539] Loading extension NV-GLX
[    25.562] (==) NVIDIA(0): Disabling shared memory pixmaps
[    25.562] (==) NVIDIA(0): Backing store disabled
[    25.562] (==) NVIDIA(0): Silken mouse enabled
[    25.562] (==) NVIDIA(0): DPMS enabled
[    25.562] Loading extension NV-CONTROL
[    25.563] Loading extension XINERAMA
[    25.563] (II) Loading sub module "dri2"
[    25.563] (II) LoadModule: "dri2"
[    25.563] (II) Module "dri2" already built-in
[    25.563] (II) NVIDIA(0): [DRI2] Setup complete
[    25.563] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    25.563] (--) RandR disabled
[    25.571] (II) SELinux: Disabled on system
[    25.572] (II) Initializing extension GLX
[    25.592] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    25.596] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    25.596] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.596] (II) LoadModule: "evdev"
[    25.596] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.598] (II) Module evdev: vendor="X.Org Foundation"
[    25.599] 	compiled for 1.14.1, module version = 2.7.3
[    25.599] 	Module class: X.Org XInput Driver
[    25.599] 	ABI class: X.Org XInput driver, version 19.1
[    25.599] (II) Using input driver 'evdev' for 'Power Button'
[    25.599] (**) Power Button: always reports core events
[    25.599] (**) evdev: Power Button: Device: "/dev/input/event1"
[    25.599] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.599] (--) evdev: Power Button: Found keys
[    25.599] (II) evdev: Power Button: Configuring as keyboard
[    25.599] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    25.599] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.599] (**) Option "xkb_rules" "evdev"
[    25.599] (**) Option "xkb_model" "pc105"
[    25.599] (**) Option "xkb_layout" "fr"
[    25.599] (**) Option "xkb_variant" "oss"
[    25.601] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    25.602] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    25.602] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.602] (II) Using input driver 'evdev' for 'Power Button'
[    25.602] (**) Power Button: always reports core events
[    25.602] (**) evdev: Power Button: Device: "/dev/input/event0"
[    25.602] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.602] (--) evdev: Power Button: Found keys
[    25.602] (II) evdev: Power Button: Configuring as keyboard
[    25.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    25.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.603] (**) Option "xkb_rules" "evdev"
[    25.603] (**) Option "xkb_model" "pc105"
[    25.603] (**) Option "xkb_layout" "fr"
[    25.603] (**) Option "xkb_variant" "oss"
[    25.603] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    25.603] (II) No input driver specified, ignoring this device.
[    25.603] (II) This device may have been added with another device file.
[    25.603] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[    25.603] (II) No input driver specified, ignoring this device.
[    25.603] (II) This device may have been added with another device file.
[    25.604] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[    25.604] (II) No input driver specified, ignoring this device.
[    25.604] (II) This device may have been added with another device file.
[    25.604] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    25.604] (II) No input driver specified, ignoring this device.
[    25.604] (II) This device may have been added with another device file.
[    25.604] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/event3)
[    25.604] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[    25.604] (II) Using input driver 'evdev' for 'Microsoft Microsoft Optical Mouse with Tilt Wheel'
[    25.604] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events
[    25.604] (**) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event3"
[    25.604] (--) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Vendor 0x45e Product 0xd1
[    25.604] (--) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[    25.604] (--) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[    25.604] (--) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Found relative axes
[    25.604] (--) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes
[    25.605] (II) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse
[    25.605] (II) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: Adding scrollwheel support
[    25.605] (**) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[    25.605] (**) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.605] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input3/event3"
[    25.605] (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE, id 8)
[    25.605] (II) evdev: Microsoft Microsoft Optical Mouse with Tilt Wheel: initialized for relative axes.
[    25.605] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[    25.605] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[    25.605] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[    25.605] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[    25.605] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[    25.605] (II) No input driver specified, ignoring this device.
[    25.605] (II) This device may have been added with another device file.
[    25.605] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event4)
[    25.605] (II) No input driver specified, ignoring this device.
[    25.605] (II) This device may have been added with another device file.
[    25.606] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event5)
[    25.606] (II) No input driver specified, ignoring this device.
[    25.606] (II) This device may have been added with another device file.
[    25.606] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    25.606] (II) No input driver specified, ignoring this device.
[    25.606] (II) This device may have been added with another device file.
[    25.606] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event7)
[    25.606] (II) No input driver specified, ignoring this device.
[    25.606] (II) This device may have been added with another device file.
[    25.606] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    25.606] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.606] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    25.607] (**) AT Translated Set 2 keyboard: always reports core events
[    25.607] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    25.607] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    25.607] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    25.607] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    25.607] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    25.607] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    25.607] (**) Option "xkb_rules" "evdev"
[    25.607] (**) Option "xkb_model" "pc105"
[    25.607] (**) Option "xkb_layout" "fr"
[    25.607] (**) Option "xkb_variant" "oss"
[    30.952] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    30.952] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    30.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    30.952] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    30.952] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    32.891] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    32.971] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    32.971] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    32.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.971] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    32.971] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    34.787] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[    34.834] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[    34.976] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    34.976] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    34.976] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    34.976] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    34.976] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    35.074] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    35.074] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    35.074] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.074] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    35.074] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    41.269] (II) XKB: reuse xkmfile /var/lib/xkb/server-7ABA798118381F5A9B8A2BAEE4A633AD61D1899D.xkm
[    55.427] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[    55.427] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    55.428] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    55.428] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[    55.428] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   305.092] (II) NVIDIA(GPU-1): Display (LG Electronics IPS231 (DFP-0)) does not support
[   305.093] (II) NVIDIA(GPU-1):     NVIDIA 3D Vision stereo.
[   330.319] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   330.319] (WW) NVIDIA(0):     viewport height 1080; adjusting
[   330.319] (WW) NVIDIA(0): Specified panning domain width of 1280 is smaller than
[   330.319] (WW) NVIDIA(0):     viewport width 1920; adjusting
[   330.319] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   330.319] (WW) NVIDIA(0):     viewport height 1080; adjusting
[   330.322] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   330.322] (WW) NVIDIA(0):     viewport height 1080; adjusting
[   332.245] (II) NVIDIA(GPU-0): Display (LG Electronics IPS231 (CRT-0)) does not support
[   332.246] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[   332.246] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   332.246] (**) NVIDIA(0):     device LG Electronics IPS231 (CRT-0) (Using EDID
[   332.246] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   332.336] (II) NVIDIA(GPU-1): Display (LG Electronics IPS231 (DFP-0)) does not support
[   332.337] (II) NVIDIA(GPU-1):     NVIDIA 3D Vision stereo.
[   349.987] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   349.987] (WW) NVIDIA(0):     viewport height 1080; adjusting
[   349.988] (WW) NVIDIA(0): Specified panning domain width of 1280 is smaller than
[   349.988] (WW) NVIDIA(0):     viewport width 1920; adjusting
[   349.988] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   349.988] (WW) NVIDIA(0):     viewport height 1080; adjusting
[   349.991] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[   349.991] (WW) NVIDIA(0):     viewport height 1080; adjusting
 lspci
00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce 6150 LE] (rev a2)
00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3)
00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1)
00:0f.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1)
00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
03:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
lsmod
Module                  Size  Used by
cfg80211              401762  0 
rfcomm                 53664  0 
bnep                   18959  2 
bluetooth             323656  10 bnep,rfcomm
snd_hda_codec_hdmi     40373  4 
binfmt_misc            13140  1 
nvidia              10287774  58 
snd_hda_codec_realtek    50261  1 
snd_hda_intel          42658  5 
ppdev                  17391  0 
snd_hda_codec         164003  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                89488  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
kvm_amd                50537  0 
snd_seq_midi           13132  0 
snd_seq_midi_event     14475  1 snd_seq_midi
kvm                   368949  1 kvm_amd
snd_rawmidi            25094  1 snd_seq_midi
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              24447  2 snd_pcm,snd_seq
snd                    60790  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12600  1 snd
psmouse                90642  0 
nv_tco                 13300  0 
serio_raw              13189  0 
k8temp                 12842  0 
i2c_nforce2            13037  0 
tpm_infineon           17164  0 
tpm_tis                18563  0 
ndiswrapper           192873  0 
parport_pc             31981  0 
mac_hid                13037  0 
lp                     13299  0 
parport                40795  3 lp,ppdev,parport_pc
hid_generic            12492  0 
usbhid                 47361  0 
hid                    87370  2 hid_generic,usbhid
pata_acpi              12886  0 
forcedeth              62099  0 
sata_nv                23004  2 
pata_amd               13761  0 
floppy                 55378  0 

voilà j'espère que quelqu'un pourra m'aider
merci

Hors ligne

#2 Le 13/02/2014, à 00:49

alx

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

Bonjour,

Ton Xorg.0.log semble indiquer que c'est bien la 210 qui est utilisée. Que donne :

lspci  -k | grep -A3 VGA

Sinon faut indiquer le pci id 03:00.0 dans xorg.conf : https://cornerstone.multitouch.fi/corne … hics-cards


UX31A (i5-3317U, HD4000, 4Go, SSD 128Go), Utopic 14.10 session Openbox.

Hors ligne

#3 Le 13/02/2014, à 07:21

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

bonjour,

merci de me répondre
voilà ce que donne la commande

lspci -k | grep -A3 VGA
00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce 6150 LE] (rev a2)
	Subsystem: Fujitsu Technology Solutions Device 10c5
	Kernel driver in use: nouveau
00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2)
--
03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device 8094
	Kernel driver in use: nouveau
03:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)

je vais essayer la methode du lien

Hors ligne

#4 Le 13/02/2014, à 08:31

alx

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

C'est le driver libre 'nouveau' qui est utilisé et pas celui de nvidia. Le driver nvidia est-il installé ?


UX31A (i5-3317U, HD4000, 4Go, SSD 128Go), Utopic 14.10 session Openbox.

Hors ligne

#5 Le 13/02/2014, à 19:02

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

bon j'ai essayer de modifier le fichier /etc/X11/xorg.conf en suivant le lien https://cornerstone.multitouch.fi/corne … hics-cards
et depuis j'arrive sur un écran noir avec une croix, si je fait ctrl+alt+F1 j'ai accès à la console.
avant quand j'installais les pilotes depuis l'installateur graphique de pilotes propriétaire, je pouvais revenir à la situation en faisant sudo apt-get remove 'nvidia-*'
et là je sais pas quoi faire.

Hors ligne

#6 Le 13/02/2014, à 19:13

alca94

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

Bonjour
Vous avez deux cartes Nvidia si vous voulez utiliser la 210 il faut désactiver l'autre (sur carte-mère) dans le bios
je ne suis pas sur que ce soit toujours utile actuellement ,ne faites pas

Dernière modification par alca94 (Le 13/02/2014, à 19:21)

Hors ligne

#7 Le 13/02/2014, à 19:27

alca94

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

Re
question idiote mais on sait jamais ,votre écran est bien branché sur la 210 et non plus sur la carte-mère ?

Hors ligne

#8 Le 13/02/2014, à 19:46

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

nan nan question pas idiote du tout, c'est même le cœur de mon problème en faite si j'installe le driver nvidia 304 qui à l'ai d'être celui qui correspond à la  carte graphique de ma carte mère, tout fonctionne bien sauf évidemment quand je branche l'écran sur la carte graphique rajoutée.
si j'installe le driver nvidia 319 qui semble être celui qui correspond à la carte graphique que j'ai rajouté, plus rien ne fonctionne.
donc ma question c'est comment faire pour que mon écran fonctionne avec ma carte graphique rajoutée?
merci

Hors ligne

#9 Le 13/02/2014, à 21:46

alca94

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

les deux cartes fonctionnent avec le 304 (j'ai une 210) et y a pas de problème

EDIT votre carte-mère est récente ou c'est un vieux truc (d'où ma proposition dans le Bios)

Dernière modification par alca94 (Le 13/02/2014, à 22:12)

Hors ligne

#10 Le 14/02/2014, à 01:59

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

je pense que par rapport à la carte graphique, ma carte mère est un vieux truc

Hors ligne

#11 Le 15/02/2014, à 08:22

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

up

Hors ligne

#12 Le 15/02/2014, à 09:04

alx

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

Dans le BIOS, il n'y a pas une option pour désactiver la carte intégrée ?


UX31A (i5-3317U, HD4000, 4Go, SSD 128Go), Utopic 14.10 session Openbox.

Hors ligne

#13 Le 15/02/2014, à 10:36

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

c'est où le bios?? big_smile

Dernière modification par fatju (Le 15/02/2014, à 10:37)

Hors ligne

#14 Le 15/02/2014, à 11:45

alx

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

Faut redémarrer le PC et au tout début dès que qqchose apparait à l’écran (logo ou écritures) faut généralement presser une touche (ESC, F2 ... ça dépend du pc). Ça ressemble à ça : http://fr.wikipedia.org/wiki/Basic_Input_Output_System. Comme tu ne connais pas, je te conseille de ne pas modifier d'option à l'aveuglette, ça peut éventuellement rendre le pc "imbootable". Si tu as de la doc sur ton ordi, regarde comment accéder au bios.


UX31A (i5-3317U, HD4000, 4Go, SSD 128Go), Utopic 14.10 session Openbox.

Hors ligne

#15 Le 18/02/2014, à 13:17

fatju

Re : carte graphique geforce 210 détecter mais ne fonctionne pas

ben pour le moment j'ai installé un vieux windows xp et ça fonctionne.
je sais pas si je vais me prendre la tête à réinstaller ubuntu. après 3 semaines d'essai

Hors ligne

Haut de page ↑