Pages : 1
#1 Le 05/10/2013, à 18:25
- mariodessuti
Configurer pavé tactile
Bonjour,
je trouve que mon pavé tactile de mon PC portable est super hyper sensible.
J'essaye de modifier ça dans le panneau de configuration mais le réglage ne reste pas enregistré.
PC portable : DELL E6320
Amicalement
Dernière modification par mariodessuti (Le 24/03/2014, à 01:05)
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#2 Le 20/10/2013, à 19:23
- mariodessuti
Re : Configurer pavé tactile
Allez svp, aidez moi car ça devient insuportable
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#3 Le 21/11/2013, à 12:32
- mariodessuti
Re : Configurer pavé tactile
j'ai constaté qu'avec une LIVE USB de Linux Mint, le pavé tactile répondait exactement à ce que j'ai connu sous windows.
Je ne sais pas si ça peut aider, mais voilà, j'apporte ce petit constat
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#4 Le 23/11/2013, à 16:08
- anje84
Re : Configurer pavé tactile
Que veut tu dire par trop sensible?
Hors ligne
#5 Le 23/11/2013, à 16:47
- mariodessuti
Re : Configurer pavé tactile
lorsque je retire mon doigt du pavé, le curseur de la sourie bouge donc forcément quand je clic ça va pas.
Donc niveau précision pour selectionner quelque chose de précis, un petit icone ou autre, et c est galère
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#6 Le 23/11/2013, à 17:03
- anje84
Re : Configurer pavé tactile
ouvre un terminal et rentre ça:
sudo gedit /usr/share/X11/xorg.conf.d/50-synaptics.conf
Tu fais une copie du fichier qu l'on vient d'ouvrir en faisant enregistrer sous avec un nom different genre (50-synaptics.conf.sauvegarde)
Aprés ça dedans tu rajoute ces lignes ci dessous a la suite de celle qu'il y a deja avec marqué option au debut dans le fichier:
Option "HorizHysteresis" "15"
Option "VertHysteresis" "15"
Option "AccelerationProfile" "2"
Option "AdaptiveDeceleration" "16"
Option "ConstantDeceleration" "16"
Option "VelocityScale" "64"
Option "AccelerationNumerator" "30"
Option "AccelerationDenominator" "10"
Option "AccelerationThreshold" "10"
comme dans cet exemple:
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
une fois fais tu fais dans le terminal ouvert précédemment (ctrl+c)
A la suite rentre:
-Si tu est sous unity:
sudo restart lightdm
-sous cinnamon:
sudo restart gdm
Puis fais moi un retour sur cette manip.
Dernière modification par anje84 (Le 23/11/2013, à 17:10)
Hors ligne
#7 Le 23/11/2013, à 17:36
- mariodessuti
Re : Configurer pavé tactile
Aprés ça dedans tu rajoute ces lignes ci dessous a la suite de celle qu'il y a deja avec marqué option au debut dans le fichier:
Alors là, j'ai absolument rien compris... J'ai relu je ne sais combien de fois la phrase et je ne le comprend pas.
De peur de faire une boulette, j'attend que tu me répondes afin de m'éclairer.
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#8 Le 23/11/2013, à 17:41
- anje84
Re : Configurer pavé tactile
Aprés ça dedans tu rajoute ces lignes ci dessous a la suite de celle qu'il y a deja avec marqué option au debut dans le fichier:
Alors là, j'ai absolument rien compris... J'ai relu je ne sais combien de fois la phrase et je ne le comprend pas.
De peur de faire une boulette, j'attend que tu me répondes afin de m'éclairer.
Désolé.
Apres avoir fais une copie de sauvegarde ,dans le fichier original ouvert precedemment Tu met a la suite des option deja inscrite les lignes que je t'ait mise.
puis tu suit le reste...
Dernière modification par anje84 (Le 23/11/2013, à 17:44)
Hors ligne
#9 Le 23/11/2013, à 18:48
- mariodessuti
Re : Configurer pavé tactile
Donc après ça :
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
?
Dernière modification par mariodessuti (Le 23/11/2013, à 18:48)
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#10 Le 23/11/2013, à 18:50
- anje84
Re : Configurer pavé tactile
fais moi un copier coller de ce que te retourne cette commande:
gedit /usr/share/X11/xorg.conf.d/50-synaptics.conf
Hors ligne
#11 Le 23/11/2013, à 18:59
- mariodessuti
Re : Configurer pavé tactile
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#12 Le 23/11/2013, à 19:03
- anje84
Re : Configurer pavé tactile
Et voila!
c'est exactement ça qu'il faut que tu mette pour tester:
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
Option "HorizHysteresis" "15"
Option "VertHysteresis" "15"
Option "AccelerationProfile" "2"
Option "AdaptiveDeceleration" "16"
Option "ConstantDeceleration" "16"
Option "VelocityScale" "64"
Option "AccelerationNumerator" "30"
Option "AccelerationDenominator" "10"
Option "AccelerationThreshold" "10"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
Hors ligne
#13 Le 23/11/2013, à 19:57
- mariodessuti
Re : Configurer pavé tactile
ok, ça à l'air d'être bon pour la sensibilité lorsque je retire mon doigt du pavé tactile.
Par contre, maintenant, le curseur ne "glisse" quasiment plus... pour le déplacer faut que je glisse plusieurs fois mon doigts sur le pavé tactile afin d'arriver d'un extrémité de mon écran à un autre
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#14 Le 23/11/2013, à 20:47
- anje84
Re : Configurer pavé tactile
maintenant je vais te donner mon fichier de configuration personnel et tu fais la même opération que tu a fais précédemment.Tous ce que je peut te dire c'est que c'est très compliqué de trouvé les bonnes valeur,une fois mes paramétré appliqué, si la vitesse ne te convient pas n'esite pas a modifier les valeur et puis tester jusqua arriver a ce qui te convient.
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "Touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "SHMConfig" "true"
Option "HorizHysteresis" "50"
Option "VertHysteresis" "50"
Option "MinSpeed" "0.5"
Option "MaxSpeed" "2.0"
Option "AccelFactor" "0.5"
# fix touchpad resolution
Option "VertResolution" "100"
Option "HorizResolution" "65"
Option "HorizTwoFingerScroll" "1"
Option "VertScrollDelta" "-111"
Option "HorizScrollDelta" "-111"
Option "TopEdge" "1374"
Option "BottomEdge" "1374"
Option "LeftEdge" "2915"
Option "RightEdge" "2915"
Option "FingerLow" "-10"
Option "FingerHigh" "5"
Option "JumpyCursorThreshold" "280"
Option "FingerPress" "200"
Option "EdgeMotionMinZ" "10"
Option "ResolutionDetect" "true"
# tweak the X-server pointer acceleration
Option "AccelerationProfile" "2"
Option "AdaptiveDeceleration" "8"
Option "ConstantDeceleration" "16"
Option "VelocityScale" "32"
Option "AccelerationNumerator" "30"
Option "AccelerationDenominator" "10"
Option "AccelerationThreshold" "10"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
Hors ligne
#15 Le 23/11/2013, à 20:56
- mariodessuti
Re : Configurer pavé tactile
ok c'est cool,
par contre peux tu me dire à quoi correspond chaques options?
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#16 Le 23/11/2013, à 20:58
- anje84
Re : Configurer pavé tactile
Je t'explique demain si tu veut bien.
La je dois m'absenter mais si tu cherche un peut sur le net tu devrais trouver.
Bonne soirée a demain.
Hors ligne
#17 Le 23/11/2013, à 20:59
- mariodessuti
Re : Configurer pavé tactile
ok, moi je vais tester ta config et je te tiens au courant
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#18 Le 23/11/2013, à 21:04
- mariodessuti
Re : Configurer pavé tactile
Test effectué!
Résultat : IDEM, voir pire au niveau du "glissé".
ok, ça à l'air d'être bon pour la sensibilité lorsque je retire mon doigt du pavé tactile.
Par contre, maintenant, le curseur ne "glisse" quasiment plus... pour le déplacer faut que je glisse plusieurs fois mon doigts sur le pavé tactile afin d'arriver d'un extrémité de mon écran à un autre
Je dois faire glisser de trop nombreuses fois mon doigt pour arriver à déplacer le curseur
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#19 Le 23/11/2013, à 21:08
- anje84
Re : Configurer pavé tactile
essaye dans option velocity scale d'augmenter la valeur soit de 64 ou de 128 ou 256
Aussi adaptive deceleration de 16
Dernière modification par anje84 (Le 23/11/2013, à 21:09)
Hors ligne
#20 Le 23/11/2013, à 22:14
- mariodessuti
Re : Configurer pavé tactile
plus pas mal.... ça a l'air d'être bien.
j'ai mis :
option velocity scale 256
adaptive deceleration de 16
Dernière modification par mariodessuti (Le 23/11/2013, à 22:16)
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#21 Le 23/11/2013, à 22:42
- anje84
Re : Configurer pavé tactile
Hors ligne
#22 Le 24/11/2013, à 12:25
- anje84
Re : Configurer pavé tactile
plus pas mal.... ça a l'air d'être bien.
j'ai mis :
option velocity scale 256
adaptive deceleration de 16
Pour les valeurs que tu a modifié les valeurs que je t'ai cité sont des puissance de 2:
2^0=1; 2^1=2; 2^2=4, 2^3=8; 2^4=16.../ 32/ 64/ 128/ 256/ 512/ 1024/ 2048......ainsi de suite.
Hors ligne
#23 Le 08/02/2014, à 21:34
- mariodessuti
Re : Configurer pavé tactile
Finalement ça ne fonctionne pas bien.
lorsque je déplace le curseur via mon TouchPad, celui-ci est hyper sensible :
je passe mon doigt juste au dessus du TouchPad sans le toucher, et le curseur se déplace.
lorsque je déplace mon curseur, et que je retire le doigt du TouchPad, le curseur bouge de quelques millimètre ce qui, souvent, me fait cliquer à coter de là où j'aurais du cliquer
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
#24 Le 24/03/2014, à 01:06
- mariodessuti
Re : Configurer pavé tactile
personne pour m'aider?
PC : DELL Latitude E6320 / Distribution : Xubuntu 15.10 (64 bits) / Bureau : Xfce 4 / Navigateur : Chromium 45.0.2454.101 (64-bit) /
Kernel : Linux 3.13.0-43-generic / Processeur : 4x Intel® Core(TM) i5-2520M CPU @ 2.5GHz / Mémoire Rame : 4Go / Disque Dur : 250Go /
Carte graphique : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
Hors ligne
Pages : 1