Je ne peux pas lire / écrire sur mon EHDD !!!

heronheronpetitpatapon · Le 13/04/2014, à 18:53

Bonjour à tous! Mon problème est trèèèès simple a expliquer.
Mon disque dur externe ne monte pas sa partition! J'ai donc essayé Gparted, qui ne le vois pas, quand ) TestDisk il ne le vois pas non plus! Que dois-je faire a votre avis?

Dernière modification par heronheronpetitpatapon (Le 15/04/2014, à 15:05)

heronheronpetitpatapon · Le 13/04/2014, à 18:53

Edit : le disk est en NTFS et mon pc tourne sous Ubunut 12.04 LTS.

Dernière modification par heronheronpetitpatapon (Le 18/04/2014, à 12:42)

heronheronpetitpatapon · Le 15/04/2014, à 11:59

Si mon disque refuse de se montrer est-ce que ça veut dire que le MBR est fichue? Comment rétablir la table des partitions tout en conservant mes fichiers ?

Cyralien · Le 16/04/2014, à 21:36

Bonjour,
Peux-tu connecter ton disque dur, attendre quelques secondes et donner le résultat de cette commande :

dmesg | tail -n20

heronheronpetitpatapon · Le 16/04/2014, à 23:40

Coucou Cyril_D
Voila le retour de la commande :

marco@marco-K43SJ:~$ dmesg | tail -n20
[89899.662169] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=26 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[89903.686367] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=39 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[89907.828651] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[89909.816265] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[90245.136746] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:74:e1:b6:b9:88:e7:08:00 SRC=192.168.1.67 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=35387 PROTO=2 
[90518.142806] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=1101 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90520.168288] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=1108 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90524.193776] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=1112 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90529.182458] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=1121 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90530.182128] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=1126 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90534.236767] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=1132 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[90538.350856] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[90540.351387] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[90544.335987] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[90554.951689] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:74:e1:b6:b9:88:e7:08:00 SRC=192.168.1.67 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=36370 PROTO=2 
[90909.301506] usb 4-1: new SuperSpeed USB device number 9 using xhci_hcd
[90909.316317] scsi12 : usb-storage 4-1:1.0
[90931.472904] usb 4-1: reset SuperSpeed USB device number 9 using xhci_hcd
[90931.489541] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880132f8a100
[90931.489553] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880132f8a140
marco@marco-K43SJ:~$

que veut dire ce charabia as-t-on avis?
Merci
Petitpatapon

Cyralien · Le 17/04/2014, à 10:47

1 - Ton disque a-t-il déjà bien fonctionné sur cet ordinateur ?

2 - Ton disque est-il connecté sur un port USB-3 ?

3 - Si tu as un port USB-2 peux-tu le connecté dessus et faire un test ?

4 - Si tu n'as pas de port USB-3 USB-2, peux-tu désactiver le xHCI dans le BIOS et faire un essai ?

Dernière modification par Cyrille_D (Le 17/04/2014, à 12:15)

heronheronpetitpatapon · Le 17/04/2014, à 19:48

Cyrille_D a écrit :

1 - Ton disque a-t-il déjà bien fonctionné sur cet ordinateur ? Non, mais c'est le disque d'un ami que je dois tenter de réparer, le disque est en NTFS et tourné avec Windows 7
2 - Ton disque est-il connecté sur un port USB-3 ? Oui
3 - Si tu as un port USB-2 peux-tu le connecté dessus et faire un test ? J'ai fait le teste et ça ne change rien
4 - Si tu n'as pas de port USB-3 USB-2, peux-tu désactiver le xHCI dans le BIOS et faire un essai ?

Comme désactive t-on le xHCI ?

Merci

Dernière modification par heronheronpetitpatapon (Le 17/04/2014, à 23:14)

Cyralien · Le 17/04/2014, à 22:23

Si tu as essayé sur un port USB-2, cela ne sert à rien de vouloir désactiver le xHCI dans le BIOS qui correspond à la désactivation de l'USB-3.

Es-tu sûr d'avoir fait le test sur un port USB-2 ? Si oui alors donne le retour de cette commande, s'il te plait :

sudo sfdisk -luS

heronheronpetitpatapon · Le 17/04/2014, à 22:51

Voila le retour de la commande

marco@marco-K43SJ:~$ sudo sfdisk -luS
[sudo] password for marco: 

Disque /dev/sda : 91201 cylindres, 255 têtes, 63 secteurs/piste
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
Unités= secteurs de 512 octets, décompte à partir de 0

   Périph Amorç.  Début       Fin   nº sect.  Id. Système
/dev/sda1   *      2048  52430847   52428800   c  W95 FAT32 (LBA)
/dev/sda2      52430848 693467135  641036288   7  HPFS/NTFS/exFAT
/dev/sda3     693469182 1460068351  766599170   5  Étendue
/dev/sda4             0         -          0   0  Vide
/dev/sda5     693469184 791123967   97654784  83  Linux
/dev/sda6     791126016 1444444159  653318144  83  Linux
/dev/sda7     1444446208 1460068351   15622144  82  partition d'échange Linux / Solaris

Disque /dev/sdb : 30436 cylindres, 64 têtes, 32 secteurs/piste
Avertissement : la table de partitions semble avoir été créée
  pour C/H/S=*/255/63 (au lieu de 30436/64/32).
Pour ce rapport, cette géométrie sera supposée telle.
Unités= secteurs de 512 octets, décompte à partir de 0

   Périph Amorç.  Début       Fin   nº sect.  Id. Système
/dev/sdb1          8192  62333951   62325760   c  W95 FAT32 (LBA)
/dev/sdb2             0         -          0   0  Vide
/dev/sdb3             0         -          0   0  Vide
/dev/sdb4             0         -          0   0  Vide
marco@marco-K43SJ:~$

heronheronpetitpatapon · Le 17/04/2014, à 22:51

Que fais cette commande a part lister les partitions comme le fait

sudo fdisk -l

?

Dernière modification par heronheronpetitpatapon (Le 17/04/2014, à 23:12)

Cyralien · Le 17/04/2014, à 23:14

Elle donne des informations sur les disques détectés, et le retour de cette commande :

udisks --show-info /dev/sdb1

Cette commande donnera d'autres informations.

heronheronpetitpatapon · Le 17/04/2014, à 23:19

Pas bête de ce brancher directement sur la partition !!!! :-) malin malin j'y avais pas pensé!

marco@marco-K43SJ:~$ udisks --show-info /dev/sdb1
Showing information for /org/freedesktop/UDisks/devices/sdb1
  native-path:                 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host6/target6:0:0/6:0:0:0/block/sdb/sdb1
  device:                      8:17
  device-file:                 /dev/sdb1
    presentation:              /dev/sdb1
    by-id:                     /dev/disk/by-id/usb-Generic_USB2.0-CRW_20100201396000000-part1
    by-id:                     /dev/disk/by-uuid/6332-3438
    by-path:                   /dev/disk/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-scsi-0:0:0:0-part1
  detected at:                 jeu. 17 avril 2014 22:11:24 CEST
  system internal:             0
  removable:                   0
  has media:                   1 (detected at jeu. 17 avril 2014 22:11:24 CEST)
    detects change:            0
    detection by polling:      0
    detection inhibitable:     0
    detection inhibited:       0
  is read only:                0
  is mounted:                  1
  mount paths:             /media/6332-3438_
  mounted by uid:              1000
  presentation hide:           0
  presentation nopolicy:       0
  presentation name:           
  presentation icon:           
  automount hint:              
  size:                        31910789120
  block size:                  512
  job underway:                no
  usage:                       filesystem
  type:                        vfat
  version:                     FAT32
  uuid:                        6332-3438
  label:                       
  partition:
    part of:                   /org/freedesktop/UDisks/devices/sdb
    scheme:                    mbr
    number:                    1
    type:                      0x0c
    flags:                    
    offset:                    4194304
    alignment offset:          0
    size:                      31910789120
    label:                     
    uuid:                      
marco@marco-K43SJ:~$

heronheronpetitpatapon · Le 17/04/2014, à 23:21

J'y pense en lisant plus en détail le message retour de

 udisks --show-info /dev/sdb1

Est -ce que ces trois lignes suivante ne montre pas que le disque se monte bien et qu'il est reconnus qq part dans le système ?

  is mounted:                  1
  mount paths:             /media/6332-3438_
  mounted by uid:              1000

Cyralien · Le 17/04/2014, à 23:23

Que donne :

ls -la /media/6332-3438_

heronheronpetitpatapon · Le 17/04/2014, à 23:30

Erreur de traitement d'info voila le BON retour de la commande du post #11

marco@marco-K43SJ:~$ udisks --show-info /dev/sdb1
Showing information for /org/freedesktop/UDisks/devices/sdb1
  native-path:                 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host6/target6:0:0/6:0:0:0/block/sdb/sdb1
  device:                      8:17
  device-file:                 /dev/sdb1
    presentation:              /dev/sdb1
    by-id:                     /dev/disk/by-id/usb-Generic_USB2.0-CRW_20100201396000000-part1
    by-id:                     /dev/disk/by-uuid/6332-3438
    by-path:                   /dev/disk/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-scsi-0:0:0:0-part1
  detected at:                 jeu. 17 avril 2014 22:11:24 CEST
  system internal:             0
  removable:                   0
  has media:                   1 (detected at jeu. 17 avril 2014 22:11:24 CEST)
    detects change:            0
    detection by polling:      0
    detection inhibitable:     0
    detection inhibited:       0
  is read only:                0
  is mounted:                  0
  mount paths:             
  mounted by uid:              0
  presentation hide:           0
  presentation nopolicy:       0
  presentation name:           
  presentation icon:           
  automount hint:              
  size:                        31910789120
  block size:                  512
  job underway:                no
  usage:                       filesystem
  type:                        vfat
  version:                     FAT32
  uuid:                        6332-3438
  label:                       
  partition:
    part of:                   /org/freedesktop/UDisks/devices/sdb
    scheme:                    mbr
    number:                    1
    type:                      0x0c
    flags:                    
    offset:                    4194304
    alignment offset:          0
    size:                      31910789120
    label:                     
    uuid:                      
marco@marco-K43SJ:~$

aie aie, il ne me donne pas d'UUID, pas de chemin pour acceder à la partition....aie aie pas cool!
Et il ne detecte aucune partition monté sur le disque.... :-/

Dernière modification par heronheronpetitpatapon (Le 17/04/2014, à 23:31)

Cyralien · Le 17/04/2014, à 23:35

Bizarre...
Que donne :

ls -la /media

heronheronpetitpatapon · Le 17/04/2014, à 23:38

Je m'étais trompé dans les branchement et j'avais branché un autre disque dur au lieu de celui malade, c'est pour ça que les info étaient erronées.
voila le retour de la commande (tjr sur le bon disque dur --> le grand malade)

drwx------  2 root  root  4096 avril 26  2012 18A75DFD2B268263
drwxrwxr-x  3 marco marco 4096 févr.  4 01:27 6332-3438
drwxr-x---  2 root  root  4096 janv.  7 10:12 apt
drwxr-xr-x  2 root  root  4096 mai   22  2012 ISO
drwxr-xr-x  2 root  root  4096 août  17  2012 NodeZero.iso
marco@marco-K43SJ:~$

Dernière modification par heronheronpetitpatapon (Le 17/04/2014, à 23:38)

Cyralien · Le 17/04/2014, à 23:46

Ah d'accord, je comprends maintenant.
Du coup redonne :

sudo sfdisk -luS

heronheronpetitpatapon · Le 17/04/2014, à 23:49

marco@marco-K43SJ:~$ sudo sfdisk -luS
[sudo] password for marco: 

Disque /dev/sda : 91201 cylindres, 255 têtes, 63 secteurs/piste
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
Unités= secteurs de 512 octets, décompte à partir de 0

   Périph Amorç.  Début       Fin   nº sect.  Id. Système
/dev/sda1   *      2048  52430847   52428800   c  W95 FAT32 (LBA)
/dev/sda2      52430848 693467135  641036288   7  HPFS/NTFS/exFAT
/dev/sda3     693469182 1460068351  766599170   5  Étendue
/dev/sda4             0         -          0   0  Vide
/dev/sda5     693469184 791123967   97654784  83  Linux
/dev/sda6     791126016 1444444159  653318144  83  Linux
/dev/sda7     1444446208 1460068351   15622144  82  partition d'échange Linux / Solaris
marco@marco-K43SJ:~$

Choux blancs il ne voit pas la partition sdb il ne voit que mon HDD interne.....comment lui tirer les vers du nez ??

Cyralien · Le 17/04/2014, à 23:51

Tu as moyen de sortir le disque du boitier ?

Edit : Et de le brancher en direct sur ton PC

Dernière modification par Cyrille_D (Le 17/04/2014, à 23:53)

Cyralien · Le 17/04/2014, à 23:55

De retour demain après-midi

heronheronpetitpatapon · Le 18/04/2014, à 00:24

Euuh non je peux pas trop, le disque dur n'est pas à moi!
Ok a demain aprem
Merci Cyril_D

Petitpatapon

Cyralien · Le 18/04/2014, à 14:01

Sans avoir connecter le HDD, peux-tu donner :

dmesg | tail

Ensuite tu connectes le HDD, tu attends une minute puis tu donnes :

dmesg

Edit : attention a ne pas faire de nœud sur le câble usb

Dernière modification par Cyrille_D (Le 18/04/2014, à 14:30)

heronheronpetitpatapon · Le 18/04/2014, à 15:38

Voila le résultats des commandes

Cyrille_D a écrit :

Sans avoir connecter le HDD, peux-tu donner :

dmesg | tail
marco@marco-K43SJ:~$ dmesg | tail
[11585.638930] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=10454 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11589.665599] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=10501 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11593.818446] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11595.777622] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11599.781152] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11691.969173] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29049 PROTO=2 
[11691.970316] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=172.16.255.254 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29050 PROTO=2 
[11787.237250] usb 2-1.2: new high-speed USB device number 10 using ehci_hcd
[11787.331639] scsi10 : usb-storage 2-1.2:1.0
[11793.512908] usb 2-1.2: USB disconnect, device number 10
marco@marco-K43SJ:~$

Ensuite tu connectes le HDD, tu attends une minute puis tu donnes :

dmesg
[ 8312.666462] sd 9:0:0:0: [sdc] No Caching mode page found
[ 8312.666466] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 8312.666469] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 8344.020721] sdc: detected capacity change from 4009754624 to 0
[ 8344.088545] usb 3-1: USB disconnect, device number 2
[ 8371.234871] usb 2-1.1.2: USB disconnect, device number 5
[ 8431.646504] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=85.49.183.116 DST=192.168.1.74 LEN=140 TOS=0x00 PREC=0x00 TTL=48 ID=1490 PROTO=UDP SPT=34026 DPT=1209 LEN=120 
[ 8433.663551] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=85.49.183.116 DST=192.168.1.74 LEN=140 TOS=0x00 PREC=0x00 TTL=48 ID=13071 PROTO=UDP SPT=34026 DPT=1209 LEN=120 
[ 8437.687751] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=85.49.183.116 DST=192.168.1.74 LEN=140 TOS=0x00 PREC=0x00 TTL=48 ID=62266 PROTO=UDP SPT=34026 DPT=1209 LEN=120 
[ 8669.881870] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=14731 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 8680.224180] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=14760 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 8681.951656] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=14810 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 8685.972138] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=14812 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 8690.054379] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 8692.069410] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 8696.065106] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 8719.721350] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 9301.677152] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=19264 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9303.683390] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=19296 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9307.702039] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=127 ID=19308 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9311.798024] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=19314 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9313.679077] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=19321 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9317.701173] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=136 TOS=0x00 PREC=0x00 TTL=128 ID=19322 PROTO=UDP SPT=4338 DPT=1209 LEN=116 
[ 9321.858923] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 9323.855241] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 9327.852498] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=167 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=147 
[ 9725.695050] usb 2-1.1.2: new low-speed USB device number 8 using ehci_hcd
[ 9725.798656] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input15
[ 9725.798834] generic-usb 0003:1BCF:05CE.0005: input,hidraw2: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1.1.2/input0
[ 9725.803773] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.1/input/input16
[ 9725.804037] generic-usb 0003:1BCF:05CE.0006: input,hiddev0,hidraw3: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1.1.2/input1
[ 9728.052777] usb 2-1.1.2: USB disconnect, device number 8
[ 9729.273731] usb 2-1.1.2: new low-speed USB device number 9 using ehci_hcd
[ 9729.378016] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input17
[ 9729.378267] generic-usb 0003:1BCF:05CE.0007: input,hidraw2: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1.1.2/input0
[ 9729.383231] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.1/input/input18
[ 9729.383550] generic-usb 0003:1BCF:05CE.0008: input,hiddev0,hidraw3: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.0-1.1.2/input1
[ 9935.004383] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=24087 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[ 9937.037108] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=24088 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[ 9941.052125] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=24102 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[ 9951.345197] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=24119 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[ 9955.204901] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[ 9957.195138] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[ 9961.196662] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[10416.040405] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:fb:74:e1:b6:b9:88:e7:08:00 SRC=192.168.1.67 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=39798 PROTO=2 
[10567.320260] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=27102 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10569.332206] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=27129 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10573.342719] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=27172 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10577.388311] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=27218 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10579.361145] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=27219 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10583.362344] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=27223 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[10587.536078] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[10589.530073] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[10593.527989] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11198.406422] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=29749 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11200.416720] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=29756 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11204.434388] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=29764 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11208.661776] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=29769 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11210.431104] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=29780 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11214.454490] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=29795 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11218.573659] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11220.566124] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11224.562329] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11335.666765] wlan0: deauthenticating from e0:a1:d7:82:15:44 by local choice (reason=3)
[11335.815442] cfg80211: All devices are disconnected, going to restore regulatory settings
[11335.815448] cfg80211: Restoring regulatory settings
[11335.815453] cfg80211: Calling CRDA to update world regulatory domain
[11336.234023] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[11336.234028] cfg80211: World regulatory domain updated:
[11336.234030] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11336.234033] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11336.234036] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11336.234039] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11336.234042] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11336.234044] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11341.288960] PM: Syncing filesystems ... done.
[11341.306856] PM: Preparing system for mem sleep
[11341.306869] Freezing user space processes ... (elapsed 0.01 seconds) done.
[11341.320612] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11341.336590] PM: Entering mem sleep
[11341.336630] Suspending console(s) (use no_console_suspend to debug)
[11341.337178] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11341.384431] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[11341.400404] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[11341.436762] sd 0:0:0:0: [sda] Stopping disk
[11341.452464] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[11341.460332] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[11341.460397] ACPI handle has no context!
[11341.468406] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 120.118 msecs
[11341.476392] PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 128.188 msecs
[11341.476417] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 127.656 msecs
[11342.049122] PM: suspend of drv:sd dev:0:0:0:0 complete after 712.997 msecs
[11342.049230] PM: suspend of drv:scsi dev:target0:0:0 complete after 713.093 msecs
[11342.049263] PM: suspend of drv:scsi dev:host0 complete after 701.961 msecs
[11342.071400] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 724.050 msecs
[11342.071447] PM: suspend of drv: dev:pci0000:00 complete after 723.546 msecs
[11342.071464] PM: suspend of devices complete after 735.824 msecs
[11342.071472] PM: suspend devices took 0.736 seconds
[11342.071667] r8169 0000:05:00.0: PME# enabled
[11342.071675] r8169 0000:05:00.0: wake-up capability enabled by ACPI
[11342.087514] xhci_hcd 0000:04:00.0: PME# enabled
[11342.087524] xhci_hcd 0000:04:00.0: wake-up capability enabled by ACPI
[11342.119489] ehci_hcd 0000:00:1d.0: PME# enabled
[11342.119522] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[11342.135394] ehci_hcd 0000:00:1a.0: PME# enabled
[11342.135430] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[11342.167355] PM: late suspend of devices complete after 96.007 msecs
[11342.167535] ACPI: Preparing to enter system sleep state S3
[11342.175354] PM: Saving platform NVS memory
[11342.176587] Disabling non-boot CPUs ...
[11342.279085] CPU 1 is now offline
[11342.382926] CPU 2 is now offline
[11342.383683] Broke affinity for irq 1
[11342.486773] CPU 3 is now offline
[11342.487177] Extended CMOS year: 2000
[11342.487433] ACPI: Low-level resume complete
[11342.487473] PM: Restoring platform NVS memory
[11342.487895] Extended CMOS year: 2000
[11342.487918] Enabling non-boot CPUs ...
[11342.488031] Booting Node 0 Processor 1 APIC 0x2
[11342.488032] smpboot cpu 1: start_ip = 99000
[11342.499042] Calibrating delay loop (skipped) already calibrated this CPU
[11342.519348] NMI watchdog enabled, takes one hw-pmu counter.
[11342.519592] CPU1 is up
[11342.519656] Booting Node 0 Processor 2 APIC 0x1
[11342.519657] smpboot cpu 2: start_ip = 99000
[11342.530668] Calibrating delay loop (skipped) already calibrated this CPU
[11342.551110] NMI watchdog enabled, takes one hw-pmu counter.
[11342.551409] CPU2 is up
[11342.551477] Booting Node 0 Processor 3 APIC 0x3
[11342.551478] smpboot cpu 3: start_ip = 99000
[11342.562487] Calibrating delay loop (skipped) already calibrated this CPU
[11342.582952] NMI watchdog enabled, takes one hw-pmu counter.
[11342.583174] CPU3 is up
[11342.586732] ACPI: Waking up from system sleep state S3
[11342.763395] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[11342.763416] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[11342.763431] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfedb0004, writing 0xdfa0a004)
[11342.763464] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[11342.763479] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xdfa08000)
[11342.763486] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[11342.763709] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[11342.763716] ehci_hcd 0000:00:1a.0: PME# disabled
[11342.763732] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[11342.763747] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[11342.763753] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[11342.763780] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10010a)
[11342.763796] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[11342.763802] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11342.763834] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x10020b)
[11342.763850] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[11342.763855] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11342.763887] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x100405)
[11342.763902] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[11342.763908] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11342.763939] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x10020b)
[11342.763955] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[11342.763986] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[11342.764001] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xdfa07000)
[11342.764008] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[11342.764043] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[11342.764047] ehci_hcd 0000:00:1d.0: PME# disabled
[11342.764106] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[11342.764161] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xdd000000, writing 0x0)
[11342.764171] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000)
[11342.764215] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[11342.764263] ath9k 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[11342.764287] ath9k 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xde600004)
[11342.764293] ath9k 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[11342.764301] ath9k 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[11342.764369] xhci_hcd 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[11342.764400] xhci_hcd 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xddc00004)
[11342.764407] xhci_hcd 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[11342.764415] xhci_hcd 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100402)
[11342.764461] xhci_hcd 0000:04:00.0: wake-up capability disabled by ACPI
[11342.764467] xhci_hcd 0000:04:00.0: PME# disabled
[11342.764526] r8169 0000:05:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[11342.764654] PM: early resume of devices complete after 1.315 msecs
[11342.764743] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[11342.764748] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[11342.764755] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[11342.764762] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[11342.764787] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[11342.764796] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[11342.764820] mei 0000:00:16.0: irq 48 for MSI/MSI-X
[11342.764823] ahci 0000:00:1f.2: setting latency timer to 64
[11342.764843] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[11342.764874] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[11342.764881] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[11342.764942] xhci_hcd 0000:04:00.0: setting latency timer to 64
[11342.764966] usb usb3: root hub lost power or was reset
[11342.764969] usb usb4: root hub lost power or was reset
[11342.766142] r8169 0000:05:00.0: wake-up capability disabled by ACPI
[11342.766159] r8169 0000:05:00.0: PME# disabled
[11342.775050] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[11342.775057] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[11342.775063] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[11342.775070] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[11342.775075] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[11342.776129] sd 0:0:0:0: [sda] Starting disk
[11342.778818] Extended CMOS year: 2000
[11342.894830] PM: resume of drv:hub dev:4-0:1.0 complete after 118.920 msecs
[11342.894833] PM: resume of drv:hub dev:3-0:1.0 complete after 119.082 msecs
[11342.894837] PM: resume of drv: dev:ep_00 complete after 118.889 msecs
[11342.894840] PM: resume of drv: dev:ep_00 complete after 119.023 msecs
[11342.894842] PM: resume of drv: dev:ep_81 complete after 118.933 msecs
[11342.894844] PM: resume of drv: dev:ep_81 complete after 119.035 msecs
[11342.915679] PM: resume of drv:r8169 dev:0000:05:00.0 complete after 149.766 msecs
[11342.951102] PM: resume of drv:hub dev:1-1:1.0 complete after 175.098 msecs
[11342.951108] PM: resume of drv: dev:ep_00 complete after 175.072 msecs
[11342.951111] PM: resume of drv: dev:ep_81 complete after 175.081 msecs
[11342.954726] PM: resume of drv:hub dev:2-1:1.0 complete after 178.523 msecs
[11342.954729] PM: resume of drv: dev:ep_00 complete after 176.109 msecs
[11342.954735] PM: resume of drv: dev:ep_81 complete after 176.136 msecs
[11343.022711] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[11343.098539] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11343.118779] PM: resume of drv: dev:ep_00 complete after 340.156 msecs
[11343.118783] PM: resume of drv:rts5139 dev:1-1.4:1.0 complete after 340.230 msecs
[11343.118791] PM: resume of drv: dev:ep_01 complete after 340.221 msecs
[11343.118794] PM: resume of drv:scsi dev:host6 complete after 340.006 msecs
[11343.118796] PM: resume of drv: dev:ep_82 complete after 340.206 msecs
[11343.118801] PM: resume of drv: dev:ep_83 complete after 340.195 msecs
[11343.118803] PM: resume of drv:scsi_host dev:host6 complete after 339.999 msecs
[11343.118806] PM: resume of drv:scsi dev:target6:0:0 complete after 339.988 msecs
[11343.118819] PM: resume of drv:sd dev:6:0:0:0 complete after 339.987 msecs
[11343.118825] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 339.978 msecs
[11343.121409] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[11343.121412] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11343.121414] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11343.166409] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[11343.166412] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11343.166414] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11343.183704] ata3.00: configured for UDMA/100
[11343.186459] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[11343.272671] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 508.577 msecs
[11343.358398] usb 2-1.1: reset high-speed USB device number 3 using ehci_hcd
[11343.381849] PM: resume of drv:uvcvideo dev:1-1.2:1.1 complete after 603.771 msecs
[11343.381853] PM: resume of drv: dev:ep_00 complete after 603.759 msecs
[11343.381861] PM: resume of drv:uvcvideo dev:1-1.2:1.0 complete after 603.845 msecs
[11343.381869] PM: resume of drv: dev:ep_82 complete after 603.838 msecs
[11343.657810] PM: resume of drv: dev:ep_00 complete after 879.918 msecs
[11343.657858] PM: resume of drv:hub dev:2-1.1:1.0 complete after 880.007 msecs
[11343.657912] PM: resume of drv: dev:ep_81 complete after 880.046 msecs
[11343.729836] usb 2-1.1.1: reset full-speed USB device number 4 using ehci_hcd
[11343.823925] PM: resume of drv: dev:ep_00 complete after 1046.198 msecs
[11343.823929] PM: resume of drv:usbhid dev:2-1.1.1:1.1 complete after 1046.230 msecs
[11343.823933] PM: resume of drv:usbhid dev:2-1.1.1:1.0 complete after 1046.269 msecs
[11343.823938] PM: resume of drv: dev:ep_82 complete after 1046.230 msecs
[11343.823958] PM: resume of drv: dev:ep_81 complete after 1046.280 msecs
[11344.081432] usb 2-1.1.2: reset low-speed USB device number 9 using ehci_hcd
[11344.369052] PM: resume of drv: dev:ep_00 complete after 1591.965 msecs
[11344.369064] PM: resume of drv:usbhid dev:2-1.1.2:1.1 complete after 1591.999 msecs
[11344.369086] PM: resume of drv: dev:ep_82 complete after 1592.025 msecs
[11344.369097] PM: resume of drv:usbhid dev:2-1.1.2:1.0 complete after 1592.081 msecs
[11344.369105] PM: resume of drv: dev:ep_81 complete after 1592.075 msecs
[11345.439130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[11345.704912] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[11345.704923] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11345.704931] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11345.741281] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[11345.741293] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11345.741301] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11345.745389] ata1.00: configured for UDMA/133
[11345.766944] PM: resume of drv:sd dev:0:0:0:0 complete after 2995.261 msecs
[11345.766993] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2992.606 msecs
[11345.767033] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2995.308 msecs
[11345.770566] PM: resume of devices complete after 3010.350 msecs
[11345.770641] PM: resume devices took 3.012 seconds
[11345.770672] PM: Finishing wakeup.
[11345.770673] Restarting tasks ... done.
[11345.776849] video LNXVIDEO:00: Restoring backlight state
[11346.598635] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11346.752828] r8169 0000:05:00.0: eth0: link down
[11346.753097] ADDRCONF(NETDEV_UP): eth0: link is not ready
[11418.553614] wlan0: authenticate with e0:a1:d7:82:15:44 (try 1)
[11418.556183] wlan0: authenticated
[11418.556373] wlan0: associate with e0:a1:d7:82:15:44 (try 1)
[11418.565039] wlan0: RX AssocResp from e0:a1:d7:82:15:44 (capab=0x411 status=0 aid=7)
[11418.565043] wlan0: associated
[11418.572299] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[11429.270157] wlan0: no IPv6 routers present
[11442.336142] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29045 PROTO=2 
[11442.336774] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=172.16.255.254 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29046 PROTO=2 
[11567.164591] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29047 PROTO=2 
[11567.167837] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=172.16.255.254 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29048 PROTO=2 
[11573.569491] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=10363 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11575.599083] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=10375 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11579.630107] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=127 ID=10402 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11583.772629] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=10439 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11585.638930] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=10454 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11589.665599] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:2c:d0:5a:5a:d4:6d:08:00 SRC=192.168.1.75 DST=192.168.1.74 LEN=137 TOS=0x00 PREC=0x00 TTL=128 ID=10501 PROTO=UDP SPT=4338 DPT=1209 LEN=117 
[11593.818446] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11595.777622] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11599.781152] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=64.4.23.141 DST=192.168.1.74 LEN=168 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=40031 DPT=1209 LEN=148 
[11691.969173] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29049 PROTO=2 
[11691.970316] [UFW BLOCK] IN=wlan0 OUT= MAC=74:2f:68:4b:04:c1:e0:a1:d7:82:15:40:08:00 SRC=172.16.255.254 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=29050 PROTO=2 
[11787.237250] usb 2-1.2: new high-speed USB device number 10 using ehci_hcd
[11787.331639] scsi10 : usb-storage 2-1.2:1.0
[11793.512908] usb 2-1.2: USB disconnect, device number 10
[11889.740634] usb 2-1.2: new high-speed USB device number 11 using ehci_hcd
[11889.834497] scsi11 : usb-storage 2-1.2:1.0
[11911.679916] usb 2-1.2: reset high-speed USB device number 11 using ehci_hcd
[11921.828891] usb 2-1.2: reset high-speed USB device number 11 using ehci_hcd
[11937.968915] usb 2-1.2: reset high-speed USB device number 11 using ehci_hcd
[11938.136475] usb 2-1.2: reset high-speed USB device number 11 using ehci_hcd
[11948.285425] usb 2-1.2: reset high-speed USB device number 11 using ehci_hcd
[11948.378012] scsi 11:0:0:0: Device offlined - not ready after error recovery
marco@marco-K43SJ:~$

Edit : attention a ne pas faire de nœud sur le câble usb

Cyralien · Le 20/04/2014, à 02:12

Je suis à court d'idée, en espérant pour toi qu'un spécialiste tombe sur ton problème et le résolve.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 13/04/2014, à 18:53

Je ne peux pas lire / écrire sur mon EHDD !!!

#2 Le 13/04/2014, à 18:53

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#3 Le 15/04/2014, à 11:59

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#4 Le 16/04/2014, à 21:36

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#5 Le 16/04/2014, à 23:40

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#6 Le 17/04/2014, à 10:47

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#7 Le 17/04/2014, à 19:48

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#8 Le 17/04/2014, à 22:23

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#9 Le 17/04/2014, à 22:51

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#10 Le 17/04/2014, à 22:51

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#11 Le 17/04/2014, à 23:14

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#12 Le 17/04/2014, à 23:19

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#13 Le 17/04/2014, à 23:21

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#14 Le 17/04/2014, à 23:23

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#15 Le 17/04/2014, à 23:30

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#16 Le 17/04/2014, à 23:35

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#17 Le 17/04/2014, à 23:38

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#18 Le 17/04/2014, à 23:46

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#19 Le 17/04/2014, à 23:49

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#20 Le 17/04/2014, à 23:51

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#21 Le 17/04/2014, à 23:55

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#22 Le 18/04/2014, à 00:24

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#23 Le 18/04/2014, à 14:01

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#24 Le 18/04/2014, à 15:38

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

#25 Le 20/04/2014, à 02:12

Re : Je ne peux pas lire / écrire sur mon EHDD !!!

Pied de page des forums