Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/04/2014, à 10:27

Tristan07

Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Bonjour,

Je viens d'installer Lubuntu 14.04 32bits à la mère de ma compagne.
Avant cela j'ai tenté Xubuntu, Fedora et un tas de distributions sans succès. Parfois je pouvais booter en Livecd/usb parfois non. Echec également via plusieurs DVD d'installation comme Fedora et Opensuse par exemple.
Le problème que je constate et c'est a rien y comprendre est que quand je boot sur XP (que j'ai gardé au cas ou) avant Lubuntu (c'était le cas également avec les Livecd avant de finaliser une installation) je peux démarrer sur Linux.Un démarrage direct « du matin » sur Lubuntu via le menu de grub me fait bloqué ce dernier au logo Lubuntu. Répété l'opération plusieurs fois, à chaque fois même résultat. Un redémarrage en revanche depuis Lubuntu fonctionne normalement.
Je me demandais s'il était possible qu'une option dans le Bios empêche ce démarrage ?

Sysinfo :

Carte mère :  ( lshw -C bus | head -6)

       produit: GA-8S649MF
       fabriquant: FUJITSU SIEMENS
       identifiant matériel: 0

Intel(R) Pentium(R) 4 CPU 2.93GHz

RAM : 1go

Carte graphique nvidia sans que sysinfo puisse m'en dire plus, les pilotes proprio recommandé sont installés (du fait d'une nécessité pour l'affichage)

Un grand merci d'avance, également aux contributeurs Lubuntu, Xubuntu et consorts wink et à tous ceux qui participent de près ou de loin à l'aventure...
@+

Dernière modification par Tristan07 (Le 24/04/2014, à 11:35)


Debian 9 Stable sur portable et poste fixe

Hors ligne

#2 Le 24/04/2014, à 10:32

Nasman

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Pour passer de XP à Linux fais tu un redémarrage ou une extinction ?


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne

#3 Le 24/04/2014, à 11:20

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Salut Nasman,

Redémarrage car comme dit plus haut depuis une extinction cela ne fonctionne pas. Je viens de réessayer pour la .... ème fois, à sec depuis une extinction, rallumer pour booter direct Lubuntu ne fonctionne pas. (pour l'instant) .


Debian 9 Stable sur portable et poste fixe

Hors ligne

#4 Le 24/04/2014, à 11:31

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Edit : cela été le cas également pour d'autres distro telles > BodhiLinuxet  Gnewsense. Lubuntu correspondant le mieux à ce que je cherche de part sa légèreté sa simplicité et sa relative ressemblance avec XP (barre tâche, clic bureau, etc...)


Debian 9 Stable sur portable et poste fixe

Hors ligne

#5 Le 24/04/2014, à 13:44

Arnaud04

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Si je comprends bien, Grub fonctionne dans tous les cas (après redémarrage et après extinction) ?

Quand tu restes bloqué sur le logo Ubutu, tu peux passer en console (via CTRL ALT F1 ou CTRL ALT F2 ou autre ?) ? Il dit des choses ?

Une fois dans Grub, tu peux modifier les options de démarrage, essaie en changeant les options ACPI par exemple ?

Hors ligne

#6 Le 24/04/2014, à 14:06

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Bonjour Arnaud04

Si je comprends bien, Grub fonctionne dans tous les cas (après redémarrage et après extinction) ?

oui il fonctionne dans les deux cas SAUF et c'est là le fait étrange, si je l'allume et que je veux de suite aller sur Lubuntu(faut passer par la case XP et redémarrer)

Quand tu restes bloqué sur le logo Ubutu, tu peux passer en console (via CTRL ALT F1 ou CTRL ALT F2 ou autre ?) ? Il dit des choses ?

Une fois dans Grub, tu peux modifier les options de démarrage, essaie en changeant les options ACPI par exemple ?

Je vais essayé
merci


Debian 9 Stable sur portable et poste fixe

Hors ligne

#7 Le 24/04/2014, à 14:51

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Peut-être identifié le problème...
e devais booter en live avec l'option nomodeset, mon fichier grub2 m'indique que l'option est activé

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="nomodeset"

En a t-il vraiment besoin ?
Edit : Pas posible d'ouvrir un terminal bloque sur le "-" , echap marche pas non plus


Debian 9 Stable sur portable et poste fixe

Hors ligne

#8 Le 24/04/2014, à 14:56

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Bonjour,

Tristan07 a écrit :

e devais booter en live avec l'option nomodeset

Ben voilà, reste plus qu'a fixer cette option dans GRUB.

Je recherche l'info.....

Dernière modification par Korak (Le 24/04/2014, à 15:05)


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#9 Le 24/04/2014, à 15:03

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Salut,
elle y est comme montre le fichier

Ben voilà, reste plus qu'a fixer cette option dans GRUB.

peu-être pas complète ?

dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: FUJITSU SIEMENS GA-8S649MF/GA-8S649MF, BIOS F5 06/29/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f4f40-0x000f4f4f] mapped at [c00f4f40]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c72000-0x36e30fff]
[    0.000000] ACPI: RSDP 000f6810 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 3fff3040 000030 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 3fff30c0 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 3fff3180 0034FD (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 3fff0000 000040
[    0.000000] ACPI: MCFG 3fff6780 00003C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: APIC 3fff66c0 000068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
[    0.000000] On node 0 totalpages: 262030
[    0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f73fe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 264 pages used for memmap
[    0.000000]   HighMem zone: 33778 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xcfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73db000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260246
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=199ad331-2505-4c5e-ac57-ea50de3007dd ro nomodeset quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2097016 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0)
[    0.000000] Memory: 1006880K/1048120K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 41240K reserved, 135112K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)
[    0.000000]       .data : 0xc165b0b2 - 0xc19ad4c0   (3401 kB)
[    0.000000]       .text : 0xc1000000 - 0xc165b0b2   (6508 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2933.429 MHz processor
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.85 BogoMIPS (lpj=11733716)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004063] Security Framework initialized
[    0.004101] AppArmor: AppArmor initialized
[    0.004105] Yama: becoming mindful.
[    0.004199] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004204] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004599] Initializing cgroup subsys memory
[    0.004612] Initializing cgroup subsys devices
[    0.004616] Initializing cgroup subsys freezer
[    0.004620] Initializing cgroup subsys blkio
[    0.004624] Initializing cgroup subsys perf_event
[    0.004628] Initializing cgroup subsys hugetlb
[    0.004682] CPU0: Hyper-Threading is disabled
[    0.004689] mce: CPU supports 4 MCE banks
[    0.004706] CPU0: Thermal monitoring enabled (TM1)
[    0.004733] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.004733] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[    0.004733] tlb_flushall_shift: 6
[    0.032861] ACPI: Core revision 20131115
[    0.035050] ACPI: All ACPI Tables successfully acquired
[    0.036060] ftrace: allocating 27695 entries in 55 pages
[    0.048208] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.091517] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.93GHz (fam: 0f, model: 04, stepping: 01)
[    0.095213] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.095226] ... version:                0
[    0.095229] ... bit width:              40
[    0.095230] ... generic registers:      18
[    0.095233] ... value mask:             000000ffffffffff
[    0.095235] ... max period:             0000007fffffffff
[    0.095237] ... fixed-purpose events:   0
[    0.095239] ... event mask:             000000000003ffff
[    0.098317] x86: Booted up 1 node, 1 CPUs
[    0.098324] smpboot: Total of 1 processors activated (5866.85 BogoMIPS)
[    0.099052] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.099236] devtmpfs: initialized
[    0.099547] EVM: security.selinux
[    0.099551] EVM: security.SMACK64
[    0.099553] EVM: security.ima
[    0.099555] EVM: security.capability
[    0.099689] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
[    0.101284] pinctrl core: initialized pinctrl subsystem
[    0.101410] regulator-dummy: no parameters
[    0.101451] RTC time: 15:38:13, date: 04/24/14
[    0.101521] NET: Registered protocol family 16
[    0.101767] EISA bus registered
[    0.101772] cpuidle: using governor ladder
[    0.101774] cpuidle: using governor menu
[    0.101885] ACPI: bus type PCI registered
[    0.101891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.102004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[    0.102009] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[    0.102012] PCI: Using MMCONFIG for extended config space
[    0.102014] PCI: Using configuration type 1 for base access
[    0.103728] bio: create slab <bio-0> at 0
[    0.103959] ACPI: Added _OSI(Module Device)
[    0.103963] ACPI: Added _OSI(Processor Device)
[    0.103966] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.103968] ACPI: Added _OSI(Processor Aggregator Device)
[    0.108344] ACPI: Interpreter enabled
[    0.108371] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.108380] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.108403] ACPI: (supports S0 S3 S4 S5)
[    0.108407] ACPI: Using IOAPIC for interrupt routing
[    0.108466] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.108588] ACPI: No dock devices found.
[    0.114687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.114700] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.114709] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.114828] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
[    0.114833] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
[    0.114837] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
[    0.114841] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
[    0.114844] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.114848] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.114852] PCI: root bus 00: using default resources
[    0.115119] PCI host bridge to bus 0000:00
[    0.115126] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.115130] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.115134] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.115151] pci 0000:00:00.0: [1039:0649] type 00 class 0x060000
[    0.115327] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[    0.115427] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.115553] pci 0000:00:02.0: [1039:0965] type 00 class 0x060100
[    0.115747] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[    0.115778] pci 0000:00:02.5: reg 0x10: [io  0x0000-0x0007]
[    0.115790] pci 0000:00:02.5: reg 0x14: [io  0x0000-0x0003]
[    0.115803] pci 0000:00:02.5: reg 0x18: [io  0x0000-0x0007]
[    0.115815] pci 0000:00:02.5: reg 0x1c: [io  0x0000-0x0003]
[    0.115827] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
[    0.115968] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.115992] pci 0000:00:02.7: reg 0x10: [io  0xc800-0xc8ff]
[    0.116014] pci 0000:00:02.7: reg 0x14: [io  0xcc00-0xcc7f]
[    0.116098] pci 0000:00:02.7: supports D1 D2
[    0.116101] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.116223] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.116242] pci 0000:00:03.0: reg 0x10: [mem 0xf3000000-0xf3000fff]
[    0.116380] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.116432] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.116450] pci 0000:00:03.1: reg 0x10: [mem 0xf3001000-0xf3001fff]
[    0.116589] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.116636] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[    0.116654] pci 0000:00:03.2: reg 0x10: [mem 0xf3002000-0xf3002fff]
[    0.116790] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.116844] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.116867] pci 0000:00:03.3: reg 0x10: [mem 0xf3003000-0xf3003fff]
[    0.116954] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.117090] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000
[    0.117113] pci 0000:00:04.0: reg 0x10: [mem 0xf3004000-0xf300407f]
[    0.117125] pci 0000:00:04.0: reg 0x14: [io  0xd000-0xd07f]
[    0.117203] pci 0000:00:04.0: supports D1 D2
[    0.117207] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.117284] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.117334] pci 0000:00:05.0: [1039:0182] type 00 class 0x010185
[    0.117356] pci 0000:00:05.0: reg 0x10: [io  0xd400-0xd407]
[    0.117369] pci 0000:00:05.0: reg 0x14: [io  0xd800-0xd803]
[    0.117382] pci 0000:00:05.0: reg 0x18: [io  0xdc00-0xdc07]
[    0.117394] pci 0000:00:05.0: reg 0x1c: [io  0xe000-0xe003]
[    0.117407] pci 0000:00:05.0: reg 0x20: [io  0xe400-0xe40f]
[    0.117419] pci 0000:00:05.0: reg 0x24: [io  0xe800-0xe87f]
[    0.117463] pci 0000:00:05.0: PME# supported from D3cold
[    0.117591] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
[    0.117696] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.117833] pci 0000:00:07.0: [1039:000a] type 01 class 0x060400
[    0.117938] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.118073] pci 0000:00:0c.0: [1106:3044] type 00 class 0x0c0010
[    0.118097] pci 0000:00:0c.0: reg 0x10: [mem 0xf3005000-0xf30057ff]
[    0.118110] pci 0000:00:0c.0: reg 0x14: [io  0xec00-0xec7f]
[    0.118194] pci 0000:00:0c.0: supports D2
[    0.118197] pci 0000:00:0c.0: PME# supported from D2 D3hot D3cold
[    0.118422] pci 0000:01:00.0: [10de:0161] type 00 class 0x030000
[    0.118443] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.118462] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.118481] pci 0000:01:00.0: reg 0x1c: [mem 0xf1000000-0xf1ffffff 64bit]
[    0.118503] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.118607] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.118620] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.118632] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.118641] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.118718] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.118728] pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
[    0.118812] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.118822] pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
[    0.118855] pci_bus 0000:00: on NUMA node 0
[    0.119033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.119149] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.119256] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.119367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.119474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.119582] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.119693] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.119803] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.120401] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.120413] ACPI: \_SB_.PCI0: notify handler is installed
[    0.120447] Found 1 acpi root devices
[    0.120645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.120649] vgaarb: loaded
[    0.120651] vgaarb: bridge control possible 0000:01:00.0
[    0.121012] SCSI subsystem initialized
[    0.121105] libata version 3.00 loaded.
[    0.121145] ACPI: bus type USB registered
[    0.121189] usbcore: registered new interface driver usbfs
[    0.121204] usbcore: registered new interface driver hub
[    0.121244] usbcore: registered new device driver usb
[    0.121416] PCI: Using ACPI for IRQ routing
[    0.132272] PCI: pci_cache_line_size set to 64 bytes
[    0.132335] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.132340] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.132499] NetLabel: Initializing
[    0.132503] NetLabel:  domain hash size = 128
[    0.132505] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.132526] NetLabel:  unlabeled traffic allowed by default
[    0.132729] Switched to clocksource refined-jiffies
[    0.142517] AppArmor: AppArmor Filesystem Enabled
[    0.142589] pnp: PnP ACPI init
[    0.142618] ACPI: bus type PNP registered
[    0.143135] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.143140] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.143144] system 00:00: [io  0x0800-0x0805] has been reserved
[    0.143148] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.143155] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.143176] pnp 00:01: [dma 4]
[    0.143210] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.143276] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.143324] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.143372] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.143791] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.144255] pnp 00:06: [dma 3]
[    0.144331] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.144485] system 00:07: [mem 0xd0000000-0xdfffffff] has been reserved
[    0.144492] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144751] system 00:08: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.144757] system 00:08: [mem 0x000d9800-0x000dbfff] has been reserved
[    0.144761] system 00:08: [mem 0x000f0000-0x000fbfff] could not be reserved
[    0.144765] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.144769] system 00:08: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.144772] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[    0.144776] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.144780] system 00:08: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.144784] system 00:08: [mem 0xffee0000-0xffefffff] has been reserved
[    0.144788] system 00:08: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.144792] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.144796] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.144800] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.144809] pnp: PnP ACPI: found 9 devices
[    0.144811] ACPI: bus type PNP unregistered
[    0.144818] PnPBIOS: Disabled by ACPI PNP
[    0.181888] Switched to clocksource acpi_pm
[    0.181949] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
[    0.181956] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.181964] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.181970] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.181979] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.181985] pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
[    0.182000] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.182005] pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
[    0.182021] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.182025] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.182029] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[    0.182033] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.182037] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.182041] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
[    0.182104] NET: Registered protocol family 2
[    0.182405] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.182435] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.182495] TCP: Hash tables configured (established 8192 bind 8192)
[    0.182574] TCP: reno registered
[    0.182579] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.182597] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.182690] NET: Registered protocol family 1
[    0.424559] pci 0000:01:00.0: Boot video device
[    0.424569] PCI: CLS 32 bytes, default 64
[    0.424690] Trying to unpack rootfs image as initramfs...
[    0.970797] Freeing initrd memory: 18172K (f5c72000 - f6e31000)
[    0.971163] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x17
[    0.971263] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.971268] Scanning for low memory corruption every 60 seconds
[    0.971724] Initialise system trusted keyring
[    0.971800] audit: initializing netlink socket (disabled)
[    0.971828] type=2000 audit(1398353893.967:1): initialized
[    1.002401] bounce pool size: 64 pages
[    1.002420] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.004402] VFS: Disk quotas dquot_6.5.2
[    1.004478] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.005176] fuse init (API version 7.22)
[    1.005297] msgmni has been set to 1738
[    1.005382] Key type big_key registered
[    1.005822] Key type asymmetric registered
[    1.005826] Asymmetric key parser 'x509' registered
[    1.005889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.005933] io scheduler noop registered
[    1.005937] io scheduler deadline registered (default)
[    1.005981] io scheduler cfq registered
[    1.006444] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[    1.006692] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[    1.006805] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.006833] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.006920] ipmi message handler version 39.2
[    1.007017] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.007027] ACPI: Power Button [PWRB]
[    1.007107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.007113] ACPI: Power Button [PWRF]
[    1.007276] GHES: HEST is not enabled!
[    1.007412] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.027888] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.027958] isapnp: Scanning for PnP cards...
[    1.122415] Linux agpgart interface v0.103
[    1.124458] brd: module loaded
[    1.125473] loop: module loaded
[    1.125694] pata_sis 0000:00:02.5: version 0.5.2
[    1.127010] scsi0 : pata_sis
[    1.127105] scsi1 : pata_sis
[    1.127156] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.127160] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.127650] libphy: Fixed MDIO Bus: probed
[    1.127814] tun: Universal TUN/TAP device driver, 1.6
[    1.127816] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.127935] PPP generic driver version 2.4.2
[    1.128031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.128041] ehci-pci: EHCI PCI platform driver
[    1.128250] ehci-pci 0000:00:03.3: EHCI Host Controller
[    1.128262] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    1.128339] ehci-pci 0000:00:03.3: irq 23, io mem 0xf3003000
[    1.172064] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    1.215737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.215742] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.215745] usb usb1: Product: EHCI Host Controller
[    1.215749] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.215751] usb usb1: SerialNumber: 0000:00:03.3
[    1.215918] hub 1-0:1.0: USB hub found
[    1.215932] hub 1-0:1.0: 8 ports detected
[    1.216234] ehci-platform: EHCI generic platform driver
[    1.216253] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.216256] ohci-pci: OHCI PCI platform driver
[    1.216445] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.216454] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.216489] ohci-pci 0000:00:03.0: irq 20, io mem 0xf3000000
[    1.392614] isapnp: No Plug & Play device found
[    1.392770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.392774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.392777] usb usb2: Product: OHCI PCI host controller
[    1.392781] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.392784] usb usb2: SerialNumber: 0000:00:03.0
[    1.392943] hub 2-0:1.0: USB hub found
[    1.392957] hub 2-0:1.0: 3 ports detected
[    1.393256] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    1.393265] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.393299] ohci-pci 0000:00:03.1: irq 21, io mem 0xf3001000
[    1.450056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.450061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.450064] usb usb3: Product: OHCI PCI host controller
[    1.450067] usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.450070] usb usb3: SerialNumber: 0000:00:03.1
[    1.450205] hub 3-0:1.0: USB hub found
[    1.450219] hub 3-0:1.0: 3 ports detected
[    1.450511] ohci-pci 0000:00:03.2: OHCI PCI host controller
[    1.450520] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[    1.450552] ohci-pci 0000:00:03.2: irq 22, io mem 0xf3002000
[    1.506055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.506060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.506063] usb usb4: Product: OHCI PCI host controller
[    1.506066] usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.506069] usb usb4: SerialNumber: 0000:00:03.2
[    1.506210] hub 4-0:1.0: USB hub found
[    1.506223] hub 4-0:1.0: 2 ports detected
[    1.506356] ohci-platform: OHCI generic platform driver
[    1.506377] uhci_hcd: USB Universal Host Controller Interface driver
[    1.506493] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.506887] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.506898] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.507057] mousedev: PS/2 mouse device common for all mice
[    1.507236] rtc_cmos 00:02: RTC can wake from S4
[    1.507387] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.507414] rtc_cmos 00:02: alarms up to one year, 242 bytes nvram
[    1.507524] device-mapper: uevent: version 1.0.3
[    1.507618] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.507649] platform eisa.0: Probing EISA bus 0
[    1.507660] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.507692] platform eisa.0: EISA: Detected 0 cards
[    1.507704] cpufreq-nforce2: No nForce2 chipset.
[    1.507710] ledtrig-cpu: registered to indicate activity on CPUs
[    1.507923] TCP: cubic registered
[    1.508107] NET: Registered protocol family 10
[    1.508424] NET: Registered protocol family 17
[    1.508444] Key type dns_resolver registered
[    1.508666] Using IPI No-Shortcut mode
[    1.508777] Loading compiled-in X.509 certificates
[    1.513392] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[    1.513417] registered taskstats version 1
[    1.517651] Key type trusted registered
[    1.521195] Key type encrypted registered
[    1.524760] AppArmor: AppArmor sha1 policy hashing enabled
[    1.524769] IMA: No TPM chip found, activating TPM-bypass!
[    1.525073] regulator-dummy: disabling
[    1.525144]   Magic number: 10:961:639
[    1.525287] rtc_cmos 00:02: setting system clock to 2014-04-24 15:38:15 UTC (1398353895)
[    1.525385] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.525388] EDD information not available.
[    1.525438] PM: Hibernation image not present or could not be loaded.
[    1.556264] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4163B, A102, max UDMA/33
[    1.572248] ata2.00: configured for UDMA/33
[    1.578771] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4163B A102 PQ: 0 ANSI: 5
[    1.584979] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[    1.584984] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.585151] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.585301] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.586340] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[    1.586401] Write protecting the kernel text: 6512k
[    1.586484] Write protecting the kernel read-only data: 2756k
[    1.586486] NX-protecting the kernel data: 5776k
[    1.612364] systemd-udevd[93]: starting version 204
[    1.695055] sata_sis 0000:00:05.0: version 1.0
[    1.695297] sata_sis 0000:00:05.0: Detected SiS 182/965 chipset
[    1.713983] scsi2 : sata_sis
[    1.716421] scsi3 : sata_sis
[    1.716514] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 17
[    1.716520] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 17
[    1.717820] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[    1.718090] sis190: 0000:00:04.0: Read MAC address from EEPROM
[    1.718094] sis190: 0000:00:04.0: Error EEPROM read 0
[    1.718098] sis190: 0000:00:04.0: Read MAC address from APC
[    1.764110] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1
[    1.968026] tsc: Refined TSC clocksource calibration: 2933.436 MHz
[    1.976032] usb 1-8: new high-speed USB device number 5 using ehci-pci
[    2.121551] usb 1-8: New USB device found, idVendor=05e3, idProduct=0710
[    2.121556] usb 1-8: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.121560] usb 1-8: Product: USB 2.0 Card
[    2.121563] usb 1-8: Manufacturer: Genesys 
[    2.121566] usb 1-8: SerialNumber: 123456789027
[    2.260025] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[    2.292288] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f841c000 (IRQ: 19), 00:0f:ea:a4:49:04
[    2.292293] sis190 0000:00:04.0 eth0: GMII mode.
[    2.292303] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[    2.356055] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.356070] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.364221] ata3.00: LPM support broken, forcing max_power
[    2.365532] ata3.00: ATA-6: WDC WD2000JD-55HBC0, 08.02D08, max UDMA/133
[    2.365537] ata3.00: 390721968 sectors, multi 16: LBA48 
[    2.380209] ata3.00: LPM support broken, forcing max_power
[    2.381532] ata3.00: configured for UDMA/133
[    2.381726] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5
[    2.382086] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    2.382175] sd 2:0:0:0: [sda] Write Protect is off
[    2.382180] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.382218] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.382647] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.388087] firewire_ohci 0000:00:0c.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    2.463176]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.463773] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.517717] usb-storage 1-8:1.0: USB Mass Storage device detected
[    2.517845] scsi4 : usb-storage 1-8:1.0
[    2.518289] usbcore: registered new interface driver usb-storage
[    2.680032] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.886140] usb 3-1: New USB device found, idVendor=1267, idProduct=0103
[    2.886145] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.888137] firewire_core 0000:00:0c.0: created device fw0: GUID 00000fea00db7622, S400
[    2.915869] hidraw: raw HID events driver (C) Jiri Kosina
[    2.946067] usbcore: registered new interface driver usbhid
[    2.946075] usbhid: USB HID core driver
[    2.958508] input: HID 1267:0103 as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input4
[    2.959343] hid-generic 0003:1267:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:03.1-1/input0
[    2.964134] input: HID 1267:0103 as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input5
[    2.964952] hid-generic 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:03.1-1/input1
[    2.968114] Switched to clocksource tsc
[    3.030751] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.030763] ata4.01: SATA link down (SStatus 0 SControl 300)
[    3.052084] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    3.265159] usb 4-1: New USB device found, idVendor=046d, idProduct=c001
[    3.265167] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.265171] usb 4-1: Product: USB Mouse
[    3.265175] usb 4-1: Manufacturer: Logitech
[    3.276690] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/input/input6
[    3.276879] hid-generic 0003:046D:C001.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.2-1/input0
[    3.452041] usb 2-2: new full-speed USB device number 2 using ohci-pci
[    3.518099] scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    3.519546] scsi 4:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    3.520966] scsi 4:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    3.522419] scsi 4:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    3.523842] scsi 4:0:0:4: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    3.524425] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.524688] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    3.524983] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    3.525214] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    3.525456] sd 4:0:0:4: Attached scsi generic sg6 type 0
[    3.528919] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.536541] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    3.538786] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    3.539959] sd 4:0:0:3: [sde] Attached SCSI removable disk
[    3.541046] sd 4:0:0:4: [sdf] Attached SCSI removable disk
[    3.614959] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    3.614967] EXT4-fs (sda6): write access will be enabled during recovery
[    3.687760] usb 2-2: New USB device found, idVendor=03f0, idProduct=0904
[    3.687767] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.687771] usb 2-2: Product: DeskJet 845C
[    3.687775] usb 2-2: Manufacturer: Hewlett-Packard
[    3.687778] usb 2-2: SerialNumber: TH1C314107SX
[    3.762451] EXT4-fs (sda6): recovery complete
[    3.770023] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    4.286411] random: init urandom read with 120 bits of entropy available
[    4.443758] random: nonblocking pool is initialized
[   11.932612] Adding 1952764k swap on /dev/sda5.  Priority:-1 extents:1 across:1952764k FS
[   12.053142] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.367813] systemd-udevd[270]: starting version 204
[   12.637872] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   12.715390] lp: driver loaded but no devices found
[   12.782772] ppdev: user-space parallel port driver
[   12.813707] parport_pc 00:06: reported by Plug and Play ACPI
[   12.813784] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   12.908423] lp0: using parport0 (interrupt-driven).
[   13.279798] nvidia: module license 'NVIDIA' taints kernel.
[   13.279808] Disabling lock debugging due to kernel taint
[   13.449599] type=1400 audit(1398346707.419:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=355 comm="apparmor_parser"
[   13.449614] type=1400 audit(1398346707.419:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[   13.449622] type=1400 audit(1398346707.419:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   13.450357] type=1400 audit(1398346707.419:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[   13.450368] type=1400 audit(1398346707.419:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   13.450738] type=1400 audit(1398346707.419:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   13.467399] type=1400 audit(1398346707.435:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=361 comm="apparmor_parser"
[   13.471884] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   13.542787] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.604267] nf_conntrack version 0.5.0 (16030 buckets, 64120 max)
[   13.622097] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   13.671255] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[   13.672174] usbcore: registered new interface driver usblp
[   13.718858] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   13.731113] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.117  Tue Nov 26 21:36:39 PST 2013
[   13.772727] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.965330] Bluetooth: Core ver 2.17
[   15.965494] NET: Registered protocol family 31
[   15.965499] Bluetooth: HCI device and connection manager initialized
[   15.965516] Bluetooth: HCI socket layer initialized
[   15.965521] Bluetooth: L2CAP socket layer initialized
[   15.965540] Bluetooth: SCO socket layer initialized
[   16.005860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.005868] Bluetooth: BNEP filters: protocol multicast
[   16.005886] Bluetooth: BNEP socket layer initialized
[   16.111883] Bluetooth: RFCOMM TTY layer initialized
[   16.111912] Bluetooth: RFCOMM socket layer initialized
[   16.111935] Bluetooth: RFCOMM ver 1.11
[   16.128058] intel8x0_measure_ac97_clock: measured 55681 usecs (2679 samples)
[   16.128066] intel8x0: clocking to 48000
[   16.265847] type=1400 audit(1398346710.235:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=667 comm="apparmor_parser"
[   16.265866] type=1400 audit(1398346710.235:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=667 comm="apparmor_parser"
[   16.266664] type=1400 audit(1398346710.235:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=667 comm="apparmor_parser"
[   16.784647] init: failsafe main process (658) killed by TERM signal
[   18.256939] init: udev-fallback-graphics main process (829) terminated with status 1
[   18.648871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.654402] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.092752] init: plymouth-upstart-bridge main process ended, respawning
[   23.144121] init: plymouth-upstart-bridge main process (1159) terminated with status 1
[   23.144155] init: plymouth-upstart-bridge main process ended, respawning
[   28.704051] sis190 0000:00:04.0 eth0: mii ext = 0000
[   28.728017] sis190 0000:00:04.0 eth0: mii lpa=41e1 adv=01e1 exp=0001
[   28.728023] sis190 0000:00:04.0 eth0: link on 100 Mbps Full Duplex mode
[   28.728046] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   79.085443] systemd-hostnamed[1663]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   81.509703] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   81.587945] JFS: nTxBlock = 8015, nTxLock = 64120
[   81.643432] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   81.759738] QNX4 filesystem 0.2.3 registered.
[   81.824346] xor: measuring software checksum speed
[   81.864009]    pIII_sse  :  4140.000 MB/sec
[   81.904008]    prefetch64-sse:  4175.000 MB/sec
[   81.904012] xor: using function: prefetch64-sse (4175.000 MB/sec)
[   81.992022] raid6: mmxx1     1807 MB/s
[   82.060037] raid6: mmxx2     2095 MB/s
[   82.128035] raid6: sse1x1    1031 MB/s
[   82.196030] raid6: sse1x2    2058 MB/s
[   82.264024] raid6: sse2x1    2132 MB/s
[   82.332022] raid6: sse2x2    3043 MB/s
[   82.332025] raid6: using algorithm sse2x2 (3043 MB/s)
[   82.332028] raid6: using intx1 recovery algorithm
[   82.465756] bio: create slab <bio-1> at 1
[   82.474305] Btrfs loaded
[  361.783997] [UFW BLOCK] IN=eth0 OUT= MAC=00:0f:ea:a4:49:04:00:16:ae:c4:d9:d2:08:00 SRC=173.194.34.15 DST=192.168.1.51 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=20523 PROTO=TCP SPT=443 DPT=35746 WINDOW=0 RES=0x00 RST URGP=0 
[  361.784831] [UFW BLOCK] IN=eth0 OUT= MAC=00:0f:ea:a4:49:04:00:16:ae:c4:d9:d2:08:00 SRC=173.194.34.15 DST=192.168.1.51 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=20524 PROTO=TCP SPT=443 DPT=35746 WINDOW=0 RES=0x00 RST URGP=0 
[  361.785488] [UFW BLOCK] IN=eth0 OUT= MAC=00:0f:ea:a4:49:04:00:16:ae:c4:d9:d2:08:00 SRC=173.194.34.15 DST=192.168.1.51 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=20525 PROTO=TCP SPT=443 DPT=35746 WINDOW=0 RES=0x00 RST URGP=0 

Debian 9 Stable sur portable et poste fixe

Hors ligne

#10 Le 24/04/2014, à 15:06

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Donne le retour complet de la commande:

cat /etc/default/grub

Je suis quasi certain que tu as fait une erreur.

Dernière modification par Korak (Le 24/04/2014, à 15:08)


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#11 Le 24/04/2014, à 15:12

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

la voici, merci wink

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="nomodeset"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Je n'ai rien touché depuis l'installation, je l'ai coché au début du Livecd Avant, sinon yavait pas moyen de booter

Je suis quasi certain que tu as fait une erreur.

Je ne fais que ça ! Mais j'apprends wink
merci


Debian 9 Stable sur portable et poste fixe

Hors ligne

#12 Le 24/04/2014, à 15:28

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Lance la commande:

gksudo gedit /etc/default/grub

Remplace cette ligne:

Tristan07 a écrit :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Par:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"

Et cette ligne:

Tristan07 a écrit :

GRUB_CMDLINE_LINUX="nomodeset"

par:

GRUB_CMDLINE_LINUX=""

Referme Gedit en sauvegardant puis termine par la commande:

sudo update-grub

Et enfin, referme tout et redémarre le PC pour nous dire s'il y a un mieux.

Dernière modification par Korak (Le 24/04/2014, à 15:32)


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#13 Le 24/04/2014, à 15:48

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Toujours pareil sad
allumage direct sur Lubuntu bloque
passage par xp puis redémarrage sur Lubuntu  fonctionne...
jsuis pourtant sur qu 'on est pas loin...
rapport avec fstab?


Debian 9 Stable sur portable et poste fixe

Hors ligne

#14 Le 24/04/2014, à 15:50

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

voici le grub modifié au cas ou :

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""

Debian 9 Stable sur portable et poste fixe

Hors ligne

#15 Le 24/04/2014, à 15:52

Nasman

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Qu'as tu comme partitions sur ce disque ?

On dirait que des paramètres indispensables au bon fonctionnement d'Ubuntu ne sont pas présents au démarrage direct mais le sont lors d'un redémarrage depuis XP.

Lors du redémarrage à chaud la mémoire n'est peut être pas complêtement vidée et peut être que des fonctions essentielles du bios sont chargées lors du démarrage de XP.


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne

#16 Le 24/04/2014, à 15:56

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Sur mon PC:

be@be-HP-Pavilion-g7:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
be@be-HP-Pavilion-g7:~$

Il y a des lignes avec des " que tu as et que je n'ai pas (ou inversement).

Vérifie ces lignes:

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

Et corrige-les.

N'oublie pas la commande:

sudo update-grub

pour valider les modifications.

Dernière modification par Korak (Le 24/04/2014, à 15:58)


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#17 Le 24/04/2014, à 15:57

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

sudo fdisk -l  :

Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 têtes, 63 secteurs/piste, 24321 cylindres, total 390721968 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xdd71dd71

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *          63   225424079   112712008+   7  HPFS/NTFS/exFAT
/dev/sda2       225425406   390721535    82648065    5  Étendue
/dev/sda5       225425408   229330943     1952768   82  partition d'échange Linux / Solaris
/dev/sda6       229332992   258627583    14647296   83  Linux
/dev/sda7       258629632   390721535    66045952   83  Linux

Forcément quelque chose de cet ordre si en passant par xp ça fonctionne.
L'idéal serait de le virer mais si ça ne fonctionne pas, plus de pc pour belle maman...

Dernière modification par Tristan07 (Le 24/04/2014, à 16:04)


Debian 9 Stable sur portable et poste fixe

Hors ligne

#18 Le 24/04/2014, à 16:03

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

@ Korac
effectivement,
Penses tu que cela puisse changer notre histoire?
j'ai bien envie de tenter mais si je reboot pas....


Debian 9 Stable sur portable et poste fixe

Hors ligne

#19 Le 24/04/2014, à 16:06

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Fais ce que je te propose au post #16 puis redémarre le PC.

Je ne sais pas t'en dire plus pour le moment.....


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#20 Le 24/04/2014, à 16:17

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Echec, toujours pareil écran noir "-" toujours obligé de passer par xp...
merci quand même...
Nasman au post #15 doit pas être loin mais comment quoi qui après .... mystère...
Si j'étais certain de pas avoir le probleme en virant xp j'irai de suite...


Debian 9 Stable sur portable et poste fixe

Hors ligne

#21 Le 24/04/2014, à 16:18

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""

je le post au cas ou


Debian 9 Stable sur portable et poste fixe

Hors ligne

#22 Le 24/04/2014, à 16:22

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

essentielles du bios sont chargées lors du démarrage de XP.

une configuration du bios même?
j'ai remis boot sur de dd en premier au lieu de cdrom  rien à voir?


Debian 9 Stable sur portable et poste fixe

Hors ligne

#23 Le 24/04/2014, à 16:32

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Ben là, je bloque.....


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#24 Le 24/04/2014, à 16:34

Tristan07

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Ben là, je bloque.....

moi depuis longtemps tongue
qu'est ce qui serait chargé par xp et pas s'il démarre seul via grub...


Debian 9 Stable sur portable et poste fixe

Hors ligne

#25 Le 24/04/2014, à 16:36

Korak

Re : Le pc de ma belle mère est-il hanté? Boot compliqué sans passer par XP

Tristan07 a écrit :

qu'est ce qui serait chargé par xp et pas s'il démarre seul via grub...

Justement, je n'en sais rien.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne