#1 Le 22/05/2014, à 16:03
- frere capsule
Clic droit - executer dans un terminal
Bonjour,
Je suis avec Ubuntu 14.04 fraichement installé.
J'aimerai retrouver la "executer dans un terminal" quand je fais un clic droit. C'est de cette façon que j'execute mon logiciel matlab.
Quelqu'un sait comment faire ?
Hors ligne
#2 Le 22/05/2014, à 16:20
- Korak
Re : Clic droit - executer dans un terminal
Bonjour,
Installe le paquet nautilus-open-terminal.
Puis referme tout et redémarre le PC.
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#3 Le 22/05/2014, à 16:32
- frere capsule
Re : Clic droit - executer dans un terminal
Bah non ca marche pas...
Hors ligne
#4 Le 22/05/2014, à 16:37
- Korak
Re : Clic droit - executer dans un terminal
Qu'est-ce qui ne marche pas?
L'installation du paquet ou l'entrée Ouvrir dans un terminal dans Nautilus?
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#5 Le 22/05/2014, à 16:41
- frere capsule
Re : Clic droit - executer dans un terminal
Notez que j'ai cocher "autoriser l'execution du fichier comme un programme" (dans propriété->permission).
Si vous savez pas, peut etre je peux executer dans un terminal ce script ?
Voici à quoi il ressemble :
#!/bin/sh
#
# Name:
# matlab script file for invoking MATLAB
#
# Usage:
# matlab [-h|-help] | [-n | -e]
# [-arch | v=variant | v=arch/variant]
# [-c licensefile] [-display Xdisplay | -nodisplay]
# [-nosplash] [-mwvisual visualid] [-debug]
# [-softwareopengl]
# [-desktop | -nodesktop | -nojvm]
# [-r MATLAB_command] [-logfile logfile] [-timing]
# [-Ddebugger [options]]
#
# Description:
# This Bourne Shell script sets MATLAB environment variables,
# determines the machine architecture, and starts the appropriate
# executable.
#
# Options:
#
# -h,-help
#
# Help. Show command usage
#
# -n
#
# Print out the values of the environment variables and
# arguments passed to the MATLAB executable as well as
# other diagnostic information. MATLAB is not run.
#
# -e
#
# Print ALL environment variables and their values to
# standard output just prior to exiting. This argument
# must have been parsed before exiting for anything to
# be printed. MATLAB is not run. The last possible exiting
# point is just before the MATLAB image would have been
# executed and a status of 0 is returned. If the exit
# status is not 0 on return then the variables and values
# may not be correct.
#
# -arch
#
# Run MATLAB assuming this architecture rather than the
# actual machine architecture.
#
# v=variant
#
# Execute the version of MATLAB found in the directory
# bin/$ARCH/variant instead of bin/$ARCH.
#
# v=arch/variant
#
# Execute the version of MATLAB found in the directory
# bin/arch/variant instead of bin/$ARCH.
#
#
# -c licensefile
#
# Set location of the license file that MATLAB should use.
# It can have the form port@host or be a colon separated
# list of license files. This option will cause the
# LM_LICENSE_FILE and MLM_LICENSE_FILE environment variables
# to be ignored.
#
# -display Xdisplay
#
# Send X commands to X Window Server display, Xdisplay. This
# supersedes the value of the DISPLAY environment variable.
#
# -nodisplay
#
# Do not display any X commands. The DISPLAY environment
# variable is ignored. The MATLAB desktop will not be started.
# However, unless -nojvm is also provided the Java virtual
# machine will be started.
#
# -nosplash
#
# Do not display the splash screen during startup.
#
# -mwvisual visualid
#
# The default X visual to use for figure windows.
# The visualid is a hex number which can be found using
# xdpyinfo.
#
# -softwareopengl
#
# On unix platforms (excluding MAC) this option selects
# between hardware and software opengl implementations.
# When used, this forces MATLAB to link in Mesa software
# opengl libraries.
#
# -debug
#
# Provides debugging information especially for X based
# problems. Should be used only in conjunction with a
# Technical Support Representative from The MathWorks, Inc.
#
# -desktop
#
# Allow the MATLAB desktop to be started by a process
# without a controlling terminal. This is usually a required
# command line argument when attempting to start MATLAB
# from a window manager menu or desktop icon.
#
# -nodesktop
#
# Do not start the MATLAB desktop. Use the current window
# for commands. The Java virtual machine will be started.
#
# -nojvm
#
# Shut off all Java support by not starting the Java virtual
# machine. In particular the MATLAB desktop will not be
# started.
#
# -r MATLAB_command
#
# Start MATLAB and execute the MATLAB command.
#
# -logfile log
#
# Make a copy of any output to the command window in file log.
# This includes all crash reports.
#
# -timing
#
# Print a summary of startup time to the command window. It is
# also recorded in a timing log, the name of which is printed
# to the shell window that started up MATLAB. Should be used
# only in conjunction with a Technical Support Representative
# from The MathWorks, Inc.
#
# -Ddebugger [options]
#
# Start MATLAB with debugger (e.g. dbx, gdb, dde, xdb, cvd).
# A full path can be specified for debugger. The options
# cover ONLY those that go after the executable to be debugged
# in the syntax of the actual debug command and for most
# debuggers this is very limited. To customize your debugging
# session use a startup file. See your debugger documentation
# for details. Options above that would normally be passed to
# the MATLAB executable should be used as parameters of
# a command inside the debugger like 'run' and not used
# when running the matlab script. If any of the options are
# placed before the -Ddebugger argument they will be
# handled as if they were part of the options after the
# -Ddebugger argument and will be treated as illegal
# options by most debuggers. The MATLAB_DEBUG environment
# variable is set to the filename part of the debugger argument.
#
# NOTE: For certain debuggers like gdb, the SHELL environment
# variable is ALWAYS set to /bin/sh.
#
# Copyright 1984-2009 The MathWorks, Inc.
# $Revision: 1.100.4.54 $ $Date: 2009/05/11 14:20:37 $
#__________________________________________________________________________
#
# Enable proper operation on Windows when using a UNIX-compatible shell
#
if [ "$OS" = "Windows_NT" ]; then
arglist=
while [ $# -gt 0 ]; do
# Quote arguments so that single quotes inside double quoted
# strings are preserved, e.g., -r "disp('hello'); quit"
arglist="$arglist \"\\\"$1\\\"\""
shift
done
eval exec "$0.exe $arglist"
fi
#
arg0_=$0
#
# Temporary file that hold MATLABPATH code from .matlab7rc.sh file.
#
temp_file=/tmp/matlab.$LOGNAME.$$.a
#
trap "rm -f $temp_file; exit 1" 1 2 3 15
#
# Some Bourne shells use builtin echo that doesn't preserve backslashes
# in certain cases, e.g. echo "'a\nb'"
#
# Need version of non-builtin echo that will preserve the backslash.
#
if [ -x /usr/ucb/echo ]; then # On Solaris, only /usr/ucb/echo does it.
ECHO=/usr/ucb/echo
elif [ -x /bin/echo ]; then # On Linux and Mac, /bin/echo does it.
ECHO=/bin/echo
else
ECHO=echo
fi
#========================= archlist.sh (start) ============================
#
# usage: archlist.sh
#
# abstract: This Bourne Shell script creates the variable ARCH_LIST.
#
# note(s): 1. This file is always imbedded in another script
#
# Copyright 1997-2007 The MathWorks, Inc.
# $Revision: 1.1.6.3 $ $Date: 2007/11/12 22:52:47 $
#----------------------------------------------------------------------------
#
ARCH_LIST='glnx86 glnxa64 mac maci maci64 sol2 sol64'
#=======================================================================
# Functions:
# check_archlist ()
#=======================================================================
check_archlist () { # Sets ARCH. If first argument contains a valid
# arch then ARCH is set to that value else
# an empty string. If there is a second argument
# do not output any warning message. The most
# common forms of the first argument are:
#
# ARCH=arch
# MATLAB_ARCH=arch
# argument=-arch
#
# Always returns a 0 status.
#
# usage: check_archlist arch=[-]value [noprint]
#
if [ $# -gt 0 ]; then
arch_in=`expr "$1" : '.*=\(.*\)'`
if [ "$arch_in" != "" ]; then
ARCH=`echo "$ARCH_LIST EOF $arch_in" | awk '
#-----------------------------------------------------------------------
{ for (i = 1; i <= NF; i = i + 1)
if ($i == "EOF")
narch = i - 1
for (i = 1; i <= narch; i = i + 1)
if ($i == $NF || "-" $i == $NF) {
print $i
exit
}
}'`
#-----------------------------------------------------------------------
if [ "$ARCH" = "" -a $# -eq 1 ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ' '
echo " Warning: $1 does not specify a valid architecture - ignored . . ."
echo ' '
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
else
ARCH=""
fi
else
ARCH=""
fi
#
return 0
}
#=======================================================================
#========================= archlist.sh (end) ==============================
#
#=======================================================================
# Functions:
# check_rc_file ()
# build_cmd ()
#=======================================================================
check_rc_file () { # Checks rc_file file for minimal features.
# Currently the only thing it checks for is:
#
# .matlab7rc.sh in the file
#
# If it fails the check print a warning message.
# The rc_file is assumed to exist.
#
# Always returns a zero status.
#
# usage: check_rc_file rc_file
#
grep '\.matlab7rc.sh' $1 > /dev/null 2>&1
if [ $? -ne 0 ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo "---------------------------------------------------------------------------"
echo "Warning: The .matlab7rc.sh file that was sourced is old . . ."
echo " --> file = $1"
echo " "
echo ' Please use $MATLAB/bin/.matlab7rc.sh to update this file.'
echo " --> MATLAB = $MATLAB"
echo "---------------------------------------------------------------------------"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
return 0
}
#=======================================================================
build_cmd () { # Takes the cmd input string and outputs the same
# string correctly quoted to be evaluated again.
#
# Always returns a 0
#
# usage: build_cmd
#
# Use version of echo here that will preserve
# backslashes within $cmd. - g490189
$ECHO "$cmd" | awk '
#----------------------------------------------------------------------------
BEGIN { squote = sprintf ("%c", 39) # set single quote
dquote = sprintf ("%c", 34) # set double quote
}
NF != 0 { newarg=dquote # initialize output string to
# double quote
lookquote=dquote # look for double quote
oldarg = $0
while ((i = index (oldarg, lookquote))) {
newarg = newarg substr (oldarg, 1, i - 1) lookquote
oldarg = substr (oldarg, i, length (oldarg) - i + 1)
if (lookquote == dquote)
lookquote = squote
else
lookquote = dquote
newarg = newarg lookquote
}
printf " %s", newarg oldarg lookquote }'
#----------------------------------------------------------------------------
return 0
}
#=======================================================================
#
#**************************************************************************
# Determine the path of the MATLAB root directory - always one directory
# up from the path to this command.
#**************************************************************************
#
filename=$arg0_
#
# Now it is either a file or a link to a file.
#
cpath=`pwd`
#
# Use it to find the top of the tree
# Skip this if someone wants to override the default
#
if [ "$SOURCE_MATLAB_ENV_FROM" = "" ]; then
#
# Follow up to 8 links before giving up. Same as BSD 4.3
#
n=1
maxlinks=8
while [ $n -le $maxlinks ]
do
#
# Get directory correctly!
#
newdir=`echo "$filename" | awk '
{ tail = $0
np = index (tail, "/")
while ( np != 0 ) {
tail = substr (tail, np + 1, length (tail) - np)
if (tail == "" ) break
np = index (tail, "/")
}
head = substr ($0, 1, length ($0) - length (tail))
if ( tail == "." || tail == "..")
print $0
else
print head
}'`
if [ ! "$newdir" ]; then
newdir="."
fi
(cd $newdir) > /dev/null 2>&1
if [ $? -ne 0 ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo 'Internal error 1: We could not determine the path of the'
echo ' MATLAB root directory.'
echo ''
echo " original command path = $arg0_"
echo " current command path = $filename"
echo ''
echo ' Please contact:'
echo ''
echo ' MathWorks Technical Support'
echo ''
echo ' for further assistance.'
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
exit 1
fi
cd $newdir
#
# Need the function pwd - not the built in one
#
newdir=`/bin/pwd`
#
newbase=`expr //$filename : '.*/\(.*\)' \| $filename`
lscmd=`ls -l $newbase 2>/dev/null`
if [ ! "$lscmd" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo 'Internal error 2: Could not determine the path of the'
echo ' MATLAB root directory.'
echo ''
echo " original command path = $filename"
echo " current command path = $filename"
echo ''
echo ' Please contact:'
echo ''
echo ' MathWorks Technical Support'
echo ''
echo ' for further assistance.'
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
exit 1
fi
#
# Check for link portably
#
if [ `expr "$lscmd" : '.*->.*'` -ne 0 ]; then
filename=`echo "$lscmd" | awk '{ print $NF }'`
else
#
# It's a file
#
dir="$newdir"
command="$newbase"
#
cd $dir/..
#
# On Mac OS X, the -P option to pwd causes it to return a resolved path, but
# on 10.5, -P is no longer the default, so we are now passing -P explicitly
#
if [ "$ARCH" = 'mac' -o "$ARCH" = 'maci' -o "$ARCH" = 'maci64' ]; then
MATLABdefault=`/bin/pwd -P`
#
# The Linux version of pwd returns a resolved path by default, and there is
# no -P option
#
else
MATLABdefault=`/bin/pwd`
fi
break
fi
n=`expr $n + 1`
done
if [ $n -gt $maxlinks ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo 'Internal error 3: More than $maxlinks links in path to'
echo " this script. That's too many!"
echo ''
echo " original command path = $filename"
echo " current command path = $filename"
echo ''
echo ' Please contact:'
echo ''
echo ' MathWorks Technical Support'
echo ''
echo ' for further assistance.'
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
exit 1
fi
else
MATLABdefault="$SOURCE_MATLAB_ENV_FROM"
fi
cd "$cpath"
#
#**************************************************************************
#
# Do not use ARCH if it exists in the environment
#
ARCH=""
#
RCSHEADER='$Revision: 1.100.4.54 $ $Date: 2009/05/11 14:20:37 $'
#
# Parse the arguments
#
stat="OK"
showenv=0
showenv_all=0
VARIANT=""
VARIANTmatlab="MATLAB"
arglist=""
arglist2=
memmgr=""
desktopflag=1
jvmflag=1
awtflag=1
nodisplay=0
usemesa=0
usemesalinux=0
while [ "$stat" = "OK" -a $# -gt 0 ]; do
case "$1" in
-h|-help)
stat=""
;;
-n)
showenv=1
;;
-e)
showenv_all=1
;;
#-c)
# This now is handled by the * case.
# ;;
-display)
if [ $# -eq 1 ]; then
stat=""
else
arglist="$arglist $1"
shift
isoption=`expr "/$1" : '/\(-.*\)'`
if [ "$isoption" != "" ]; then
stat=""
else
arglist="$arglist $1"
display="$1"
fi
fi
;;
-nodisplay)
arglist="$arglist $1"
nodisplay=1
;;
-noawt)
arglist="$arglist $1"
awtflag=0
;;
-softwareopengl)
usemesa=1;
;;
-softwareopengllinux)
usemesalinux=1;
;;
-memmgr)
if [ $# -eq 1 ]; then
stat=""
else
shift
memmgr=$1
fi
;;
-check_malloc)
memmgr="debug"
;;
-D*)
debugger=`expr "$1" : '-D\(.*\)'`
if [ "$debugger" = "" ]; then
stat=""
else
MATLAB_DEBUG=`expr "//$debugger" : ".*/\(.*\)"`
fi
;;
-jdb)
arglist="$arglist $1"
;;
-nodesktop)
desktopflag=0
;;
-nojvm)
jvmflag=0
;;
-r)
if [ $# -eq 1 ]; then
stat=""
else
arglist="$arglist $1"
shift
cmd="$1"
quoted_cmd=`build_cmd`
# Use version of echo here that will preserve
# backslashes in $quoted_cmd. - g490189
arglist="$arglist `$ECHO $quoted_cmd`"
fi
;;
-timing)
if [ "$ARCH" = "" ]; then
. $MATLABdefault/bin/util/arch.sh
fi
if [ -f $MATLABdefault/bin/$ARCH/cpucount ]; then
MATLAB_CPUCOUNT=`$MATLABdefault/bin/$ARCH/cpucount`
fi
;;
-logfile)
if [ $# -eq 1 ]; then
#
# The MATLAB executable will check that there is no logfile
#
arglist="$arglist $1"
else
#
# The MATLAB executable will check if the file can be opened for writing
#
arglist="$arglist $1 $2"
shift
fi
;;
v=*/*)
foundVariant=0
#
# Test options if no debugger.
#
if [ "$debugger" = "" ]; then
#
# Check for variant
#
value=`expr "$1" : 'v=\(.*\)/.*'`
value2=`expr "$1" : 'v=.*/\(.*\)'`
arch=$ARCH
check_archlist argument=$value noprint
if [ "$ARCH" != "" -a -f $MATLABdefault/bin/$value/$value2/MATLAB ]; then
VARIANT=$value2
VARIANTmatlab=$VARIANT/MATLAB
foundVariant=1
else
ARCH=$arch
fi
fi
if [ "$foundVariant" = "0" ]; then
arglist="$arglist $1"
fi
;;
v=*)
foundVariant=0
#
# Test options if no debugger.
#
if [ "$debugger" = "" ]; then
value=`expr "$1" : 'v=\(.*\)'`
#
# Check for variant
#
if [ "$ARCH" = "" ]; then
. $MATLABdefault/bin/util/arch.sh
fi
if [ -f $MATLABdefault/bin/$ARCH/$value/MATLAB ]; then
VARIANT=$value
VARIANTmatlab=$VARIANT/MATLAB
foundVariant=1
fi
fi
if [ "$foundVariant" = "0" ]; then
arglist="$arglist $1"
fi
;;
-*)
found=0
#
# Test options if no debugger.
#
if [ "$debugger" = "" ]; then
#
# Check for -arch
#
arch=$ARCH
check_archlist argument=$1 noprint
if [ "$ARCH" != "" ]; then
found=1
else
ARCH=$arch
fi
fi
if [ "$found" = "0" ]; then
arglist="$arglist $1"
fi
;;
*)
arglist="$arglist $1"
;;
esac
shift
done
#
# Check for errors
#
if [ "$stat" != "OK" -a "$showenv" != "1" ]; then # An error occurred.
#
RCSREVISION=`echo "$RCSHEADER" | awk '{ print $2 }'`
#
if [ "$stat" != "" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ""
echo " ${command}: $stat"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
if [ "$ARCH" = "" ]; then
. $MATLABdefault/bin/util/arch.sh
fi
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ""
echo " Usage: ${command} [-h|-help] | [-n | -e]"
echo " [-arch | v=variant | v=arch/variant]"
echo " [-c licensefile] [-display Xdisplay | -nodisplay]"
echo " [-nosplash] [-mwvisual visualid] [-debug] [-softwareopengl]"
echo " [-desktop | -nodesktop | -nojvm]"
echo " [-r MATLAB_command] [-logfile log] [-timing]"
echo " [-Ddebugger [options]]"
echo ""
echo " -h|-help - Display arguments."
echo " -n - Display final environment variables,"
echo " arguments, and other diagnostic"
echo " information. MATLAB is not run."
echo " -e - Display ALL the environment variables and"
echo " their values to standard output. MATLAB"
echo " is not run. If the exit status is not"
echo " 0 on return then the variables and values"
echo " may not be correct."
echo " -arch - Start MATLAB assuming architecture arch."
echo " v=variant - Start the version of MATLAB found"
echo " in bin/$ARCH/variant instead of bin/$ARCH."
echo " v=arch/variant - Start the version of MATLAB found"
echo " in bin/arch/variant instead of bin/$ARCH."
echo " -c licensefile - Set location of the license file that MATLAB"
echo " should use. It can have the form port@host or"
echo " be a colon separated list of license files."
echo " The LM_LICENSE_FILE and MLM_LICENSE_FILE"
echo " environment variables will be ignored."
echo " -display Xdisplay - Send X commands to X server display, Xdisplay."
echo " -nodisplay - Do not display any X commands. The MATLAB"
echo " desktop will not be started. However, unless"
echo " -nojvm is also provided the Java virtual machine"
echo " will be started."
echo " -nosplash - Do not display the splash screen during startup."
echo " -mwvisual visualid - The default X visual to use for figure windows."
echo " -debug - Provide debugging information especially for X"
echo " based problems."
echo " -desktop - Allow the MATLAB desktop to be started by a"
echo " process without a controlling terminal. This is"
echo " usually a required command line argument when"
echo " attempting to start MATLAB from a window manager"
echo " menu or desktop icon."
echo " -nodesktop - Do not start the MATLAB desktop. Use the current"
echo " terminal for commands. The Java virtual machine"
echo " will be started."
echo " -nojvm - Shut off all Java support by not starting the"
echo " Java virtual machine. In particular the MATLAB"
echo " desktop will not be started."
echo " -r MATLAB_command - Start MATLAB and execute the MATLAB_command."
echo " -logfile log - Make a copy of any output to the command window"
echo " in file log. This includes all crash reports."
echo " -timing - Print a summary of startup time to the command"
echo " window. It is also recorded in a timing log, the"
echo " name of which is printed to the shell window that"
echo " started up MATLAB."
echo " -Ddebugger [options] - Start debugger to debug MATLAB."
echo ""
echo " Revision #: $RCSREVISION"
echo ""
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
if [ "$showenv_all" = "1" ]; then
env
fi
exit 1
fi
#
# Determine what is set in the environment
#
AUTOMOUNT_MAPenv="$AUTOMOUNT_MAP"
DISPLAYenv="$DISPLAY"
TOOLBOXenv="$TOOLBOX"
MATLABPATHenv="$MATLABPATH"
XAPPLRESDIRenv="$XAPPLRESDIR"
XKEYSYMDBenv="$XKEYSYMDB"
MATLAB_MEM_MGRenv="$MATLAB_MEM_MGR"
SHELLenv="$SHELL"
#
# Set the defaults - MATLABdefault is determined above.
#
AUTOMOUNT_MAPdefault=''
DISPLAYdefault=''
ARCHdefault=''
TOOLBOXdefault='$MATLAB/toolbox'
MATLABPATHdefault=''
#
XAPPLRESDIRdefault='$MATLAB/X11/app-defaults'
XKEYSYMDBdefault='$MATLAB/X11/app-defaults/XKeysymDB'
#
MATLAB_MEM_MGRdefault=''
#
SHELLdefault='$SHELL'
#
MATLAB_UTIL_DIRdefault=$MATLABdefault/bin/util
#
# Feature state variables
#
#--------------------------------------------------------------------------
#
# Source file .matlab7rc.sh and get values for the following environment
# variables
#
# ARCH (machine architecture)
# AUTOMOUNT_MAP (Path prefix map for automounting)
# DISPLAY (DISPLAY variable for X Window System)
# LDPATH_PREFIX (path(s) that appear at the start of
# LD_LIBRARY_PATH)
# LDPATH_SUFFIX (path(s) that appear at the end of
# LD_LIBRARY_PATH)
# LD_LIBRARY_PATH (load library path - the name
# LD_LIBRARY_PATH is platform dependent)
# MATLAB (MATLAB root directory)
# MATLABPATH (MATLAB search path)
# SHELL (which shell to use for ! and unix
# command in MATLAB)
# TOOLBOX (toolbox path)
# XAPPLRESDIR (X Application Resource Directory)
# XKEYSYMDB (X keysym Database file)
#
# The search order for .matlab7rc.sh is:
#
# . (current directory)
# $HOME (users home directory)
# $MATLAB/bin (MATLAB bin directory)
#
if [ -f .matlab7rc.sh ]; then
SOURCED_DIR='.'
SOURCED_DIReval=`pwd`
. "$cpath"/.matlab7rc.sh
elif [ -f "$HOME"/.matlab7rc.sh ]; then
SOURCED_DIR='$HOME'
SOURCED_DIReval=$HOME
. "$HOME"/.matlab7rc.sh
elif [ -f $MATLABdefault/bin/.matlab7rc.sh ]; then
#
# NOTE: At this point we will use the MATLAB determined earlier to
# source the file. After that the value in that file if not
# null will be used.
#
SOURCED_DIR='$MATLAB/bin'
SOURCED_DIReval=$MATLABdefault/bin
. $MATLABdefault/bin/.matlab7rc.sh
else
SOURCED_DIR=
MATLAB_UTIL_DIR=$MATLAB_UTIL_DIRdefault
#
# arch.sh requires MATLAB - save temporarily
#
MATLABsave="$MATLAB"
MATLAB="$MATLABdefault"
#
. $MATLAB_UTIL_DIR/arch.sh
if [ "$ARCH" = "unknown" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo '^G Sorry! We could not determine the machine architecture for your'
echo ' host. Please contact:'
echo ''
echo ' MathWorks Technical Support'
echo ''
echo ' for further assistance.'
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
exit 1
fi
MATLAB="$MATLABsave"
#
ARCHdefault=$ARCH
fi
#
#--------------------------------------------------------------------------
#
# Determine the final values for the following variables
#
# ARCH (machine architecture)
# AUTOMOUNT_MAP (Path prefix map for automounting)
# DISPLAY (DISPLAY variable for X Window System)
# MATLAB (MATLAB root directory)
# MATLAB_MEM_MGR (Type of memory manager)
# MATLAB_DEBUG (name of the debugger from -Ddebugger argument)
# MATLABPATH (MATLAB search path)
# SHELL (which shell to use for ! and unix
# command in MATLAB)
# TOOLBOX (toolbox path)
# XAPPLRESDIR (X Application Resource Directory)
# XKEYSYMDB (X keysym Database file)
#
rcfile='r '
environ='e '
script='s '
argument='a '
rcfilep='rs'
environp='es'
#
# Sourced a .matlab7rc.sh file
#
if [ "$SOURCED_DIR" != "" ]; then
if [ "$AUTOMOUNT_MAP" != "" ]; then
if [ "$MATLAB" != "$MATLABdefault" -a "$AUTOMOUNT_MAPenv" != "" ]; then
AUTOMOUNT_MAPmode="$environ"
else
AUTOMOUNT_MAPmode="$rcfile"
fi
else
AUTOMOUNT_MAPmode="$script"
AUTOMOUNT_MAP="$AUTOMOUNT_MAPdefault"
fi
#
if [ "$MATLAB" != "" ]; then
MATLABmode="$rcfile"
else
MATLABmode="$script"
MATLAB="$MATLABdefault"
fi
if [ "$AUTOMOUNT_MAP" != "" ]; then
MATLAB=`echo $MATLAB $AUTOMOUNT_MAP | awk '
{if (substr($1,1,length($2)) == $2)
if (NF == 4) # a -> b
print $NF substr($1,length($2) + 1)
else # a ->
print substr($1,length($2) + 1)
else
print $1}'`
fi
#
if [ "$display" != "" ]; then
DISPLAYmode="$argument"
DISPLAY="$display"
elif [ "$DISPLAY" != "" ]; then
if [ "$DISPLAYenv" = "$DISPLAY" ]; then
DISPLAYmode="$environ"
else
DISPLAYmode="$rcfile"
fi
else
DISPLAYmode="$script"
DISPLAY="`eval echo $DISPLAYdefault`"
fi
#
if [ "$ARCH" != "" ]; then
ARCHmode="$rcfile"
else
ARCHmode="$script"
ARCH="$ARCHdefault"
fi
#
if [ "$TOOLBOX" != "" ]; then
if [ "$TOOLBOXenv" = "$TOOLBOX" ]; then
TOOLBOXmode="$environ"
else
TOOLBOXmode="$rcfile"
fi
else
TOOLBOXmode="$script"
TOOLBOX="`eval echo $TOOLBOXdefault`"
fi
#
if [ "$XAPPLRESDIR" != "" ]; then
XAPPLRESDIR="`eval echo $XAPPLRESDIR`"
if [ "$XAPPLRESDIRenv" = "$XAPPLRESDIR" ]; then
XAPPLRESDIRmode="$environ"
else
XAPPLRESDIRmode="$rcfile"
fi
else
XAPPLRESDIRmode="$script"
XAPPLRESDIR="`eval echo $XAPPLRESDIRdefault`"
fi
#
if [ "$XKEYSYMDB" != "" ]; then
XKEYSYMDB="`eval echo $XKEYSYMDB`"
if [ "$XKEYSYMDBenv" = "$XKEYSYMDB" ]; then
XKEYSYMDBmode="$environ"
else
XKEYSYMDBmode="$rcfile"
fi
else
XKEYSYMDBmode="$script"
XKEYSYMDB="`eval echo $XKEYSYMDBdefault`"
fi
#
if [ "$MATLABPATH" != "" ]; then
if [ "$MATLABPATHenv" = "$MATLABPATH" ]; then
MATLABPATHmode="$environp"
else
MATLABPATHmode="$rcfilep"
fi
else
MATLABPATHmode="$script"
MATLABPATH="`eval echo $MATLABPATHdefault`"
fi
#
# For MATLAB_MEM_MGR:
#
# 1. memmgr manager argument
# 2. check_malloc argument
# 3. rcfile (not currently set)
# 4. environment
# 5. default (empty)
#
if [ "$memmgr" != "" ]; then
MATLAB_MEM_MGRmode="$argument"
MATLAB_MEM_MGR=$memmgr
elif [ "$MATLAB_MEM_MGR" != "" ]; then
if [ "$MATLAB_MEM_MGRenv" = "$MATLAB_MEM_MGR" ]; then
MATLAB_MEM_MGRmode="$environ"
else
MATLAB_MEM_MGRmode="$rcfile"
fi
else
MATLAB_MEM_MGRmode="$script"
MATLAB_MEM_MGR="$MATLAB_MEM_MGRdefault"
fi
#
if [ "$MATLAB_DEBUG" = "" ]; then
MATLAB_DEBUGmode="$script"
else
MATLAB_DEBUGmode="$argument"
fi
#
if [ "$SHELL" != "" ]; then
if [ "$SHELLenv" = "$SHELL" ]; then
SHELLmode="$environ"
else
SHELLmode="$rcfile"
fi
else
SHELLmode="$script"
SHELL="`eval echo $SHELLdefault`"
fi
else
if [ "$AUTOMOUNT_MAPenv" != "" ]; then
AUTOMOUNT_MAPmode="$environ"
AUTOMOUNT_MAP="$AUTOMOUNT_MAPenv"
else
AUTOMOUNT_MAPmode="$script"
AUTOMOUNT_MAP="$AUTOMOUNT_MAPdefault"
fi
MATLABmode="$script"
if [ "$AUTOMOUNT_MAP" != "" ]; then
MATLAB=`echo $MATLABdefault $AUTOMOUNT_MAP | awk '
{if (substr($1,1,length($2)) == $2)
if (NF == 4) # a -> b
print $NF substr($1,length($2) + 1)
else # a ->
print substr($1,length($2) + 1)
else
print $1}'`
else
MATLAB="$MATLABdefault"
fi
if [ "$display" != "" ]; then
DISPLAYmode="$argument"
DISPLAY="$display"
else
DISPLAYmode="$environ"
DISPLAY="$DISPLAYenv"
fi
ARCHmode="$script"
ARCH="$ARCHdefault"
TOOLBOXmode="$script"
TOOLBOX="`eval echo $TOOLBOXdefault`"
XAPPLRESDIRmode="$script"
XAPPLRESDIR="`eval echo $XAPPLRESDIRdefault`"
XKEYSYMDBmode="$script"
XKEYSYMDB="`eval echo $XKEYSYMDBdefault`"
if [ "$MATLABPATHenv" != "" ]; then
MATLABPATHmode="$environp"
MATLABPATH="$MATLABPATHenv"
else
MATLABPATHmode="$script"
MATLABPATH="`eval echo $MATLABPATHdefault`"
fi
if [ "$check_malloc" = "1" ]; then
MATLAB_MEM_MGRmode="$argument"
MATLAB_MEM_MGR='debug'
elif [ "$MATLAB_MEM_MGR" != "" ]; then
MATLAB_MEM_MGRmode="$environ"
else
MATLAB_MEM_MGRmode="$script"
MATLAB_MEM_MGR="$MATLAB_MEM_MGRdefault"
fi
if [ "$MATLAB_DEBUG" = "" ]; then
MATLAB_DEBUGmode="$script"
else
MATLAB_DEBUGmode="$argument"
fi
SHELLmode="$environ"
SHELL="$SHELLenv"
fi
#
#--------------------------------------------------------------------------
#
# Check rc_file
#
if [ "$SOURCED_DIR" = '.' ]; then
check_rc_file "$cpath"/.matlab7rc.sh
elif [ "$SOURCED_DIR" = '$HOME' ]; then
check_rc_file "$HOME"/.matlab7rc.sh
fi
#
# Use MATLAB instead of matlab for the executable
# A more invasive change (to be made long-term) involves setmwe
#
VARIANTmatlab=`echo "$VARIANTmatlab" | sed 's|matlab$|MATLAB|'`
#
# Determine the final values for the following variables
#
# LD_LIBRARY_PATH (load library path - the name
# LD_LIBRARY_PATH is platform dependent)
# _JVM_THREADS_TYPE (type of Java virtual machine threads)
#
#--------------------------------------------------------------------------
#
# Decide whether to put -nojvm or -nodesktop back on the argument list.
# Check the mac first.
#
if [ "$ARCH" = 'mac' -o "$ARCH" = 'maci' -o "$ARCH" = 'maci64' ]; then
#
# If the user did not explicitly set v=arch or v=arch/variant,
# then launch the executable via the Mac OS X package by default, so that
# resources and executable icons can be automatically found by the system.
# Filter out noawt and nodisplay.
#
if [ "$foundVariant" = "" -a "$awtflag" = '1' -a "$nodisplay" = '0' ]; then
VARIANT=MATLAB.app/Contents/MacOS
VARIANTmatlab=$VARIANT/MATLAB
fi
#
# Make sure the MACI64 environment variable is set to 0 when running as maci
# so that other processes (MEX, mcc, etc.) all know to run as 32-bit (see arch.sh).
#
if [ "$ARCH" = 'maci' -a "$MACI64" = "" ]; then
maci64="0"
MACI64=$maci64
export MACI64
fi
fi
if [ "$jvmflag" = "0" ]; then
arglist="$arglist -nojvm"
elif [ "$desktopflag" = "0" ]; then
arglist="$arglist -nodesktop"
fi
#
# Determine the java vm path for each platform.
#
case "$ARCH" in
sol2)
JARCH="sparc"
;;
sol64)
JARCH="sparcv9"
;;
glnx86)
JARCH="i386"
;;
glnxa64)
JARCH="amd64"
;;
*)
JARCH=$ARCH
;;
esac
#
if [ "$ARCH" = 'mac' -o "$ARCH" = 'maci' -o "$ARCH" = 'maci64' ]; then
DEFAULT_JRE_LOC=/System/Library/Frameworks/JavaVM.framework
else
DEFAULT_JRE_LOC=$MATLAB/sys/java/jre/$ARCH/jre
fi
# No more symlinks to jre
if [ "X$MATLAB_JAVA" = "X" ]; then
MATLAB_JAVA_CFG=`head -n 1 ${DEFAULT_JRE_LOC}.cfg 2>/dev/null`
else
MATLAB_JAVA_CFG=$MATLAB_JAVA
fi
JRE_LOC=$DEFAULT_JRE_LOC${MATLAB_JAVA_CFG:-}
if [ ! -d "$JRE_LOC" ]; then
JRE_LOC=$MATLAB_JAVA_CFG
fi
#
# Threads
#
case "$ARCH" in
*)
JLIB=lib
;;
esac
JAVA_VM_PATH="$JRE_LOC/$JLIB/$JARCH/native_threads"
#
# JVM
#
JVM_LIB_ARCH="$JRE_LOC/$JLIB/$JARCH"
if [ "$ARCH" = "glnxa64" -o "$ARCH" = "sol64" ]; then
VM_FLAVOR=server
else
VM_FLAVOR=client
fi
if [ -d $JVM_LIB_ARCH/$VM_FLAVOR ]; then
JAVA_VM_PATH="$JAVA_VM_PATH:$JVM_LIB_ARCH/$VM_FLAVOR"
elif [ -d $JVM_LIB_ARCH/hotspot ]; then
JAVA_VM_PATH="$JAVA_VM_PATH:$JVM_LIB_ARCH/hotspot"
elif [ -d $JVM_LIB_ARCH/classic ]; then
JAVA_VM_PATH="$JAVA_VM_PATH:$JVM_LIB_ARCH/classic"
_JVM_THREADS_TYPE=native_threads; export _JVM_THREADS_TYPE
fi
JAVA_VM_PATH="$JAVA_VM_PATH:$JRE_LOC/$JLIB/$JARCH"
#
#--------------------------------------------------------------------------
#
# Check for FVWM window manager on Linux
# or in a glnx86) switch case
if [ "$ARCH" = "glnx86" -o "$ARCH" = "glnxi64" ] ; then
if [ -f $MATLAB/bin/$ARCH/fvwmfix ]; then
$MATLAB/bin/$ARCH/fvwmfix -quiet
fi
fi
#
# Augment with AWT Motif default locale resource files
#
XFILESEARCHPATH="$JRE_LOC/lib/locale/%L/%T/%N%S:$XFILESEARCHPATH"
export XFILESEARCHPATH
#
# Initialize LDPATH_MATLAB to include any VARIANT directory
#
if [ "$VARIANT" != "" ]; then
BIN_DIRS=$MATLAB/bin/$ARCH/$VARIANT:$MATLAB/bin/$ARCH
else
BIN_DIRS=$MATLAB/bin/$ARCH
fi
LDPATH_MATLAB=$MATLAB/sys/os/$ARCH:$BIN_DIRS:$MATLAB/extern/lib/$ARCH
#
# If directory runtime/$ARCH exists add to LD_LIBRARY_PATH. Needed for
# compiler and related builders.
#
if [ -d $MATLAB/runtime/$ARCH ]; then
LDPATH_MATLAB=$LDPATH_MATLAB:$MATLAB/runtime/$ARCH
fi
#
# Determine how to interpret the $usemesa variable.
#
# First version: we tested for GLX, and guessed in this startup script.
# Second version: we tested at runtime, and used RPATH in glren.so
# Third version: Too many 3rd party libraries, use command line
# option to select.
case "$ARCH" in
mac)
# MAC does not have this option
if [ "$usemesa" = "1" ]; then
echo "Option -softwareopengl does not apply on MAC."
fi
;;
maci)
# MAC does not have this option
if [ "$usemesa" = "1" ]; then
echo "Option -softwareopengl does not apply on MAC."
fi
;;
*)
# Look for usemesalinux startup option.
if [ "$usemesalinux" = "1" ]; then
case "$ARCH" in
glnx86)
usemesa=1;
;;
glnxa64)
usemesa=1;
;;
esac
fi
# test if we have no GLX extension, and set usemesa to 1
# we used to use 'xdpyinfo', but that would sometimes hang.
# We can't query for glxinfo because that is also unreliable.
if [ "$usemesa" = "1" ]; then
LDPATH_MATLAB=$MATLAB/sys/opengl/lib/$ARCH:$LDPATH_MATLAB
echo "MATLAB is selecting SOFTWARE OPENGL rendering."
# else
# echo "MATLAB will try and use hardware opengl."
fi
esac
#
#-------------------------------------------------------------------------
#
# Determine the osg library path
#
# Note: Must come before LD_LIBRARY_PATH so MAC can add it to it library path
# as it does not support RPATH yet.
osg="$MATLAB/sys/openscenegraph/lib/$ARCH"
OSG_LD_LIBRARY_PATH=$osg
export OSG_LD_LIBRARY_PATH
#
#--------------------------------------------------------------------------
#
# Determine <final_load_library_path> for each platform
#
case "$ARCH" in
sol*|glnx*)
LD_LIBRARY_PATH="`eval echo $LD_LIBRARY_PATH`"
LDPATH_MATLAB=$LDPATH_MATLAB:$JAVA_VM_PATH
if [ "$LD_LIBRARY_PATH" != "" ]; then
LD_LIBRARY_PATH=$LDPATH_MATLAB:$LD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
else
LD_LIBRARY_PATH=$LDPATH_MATLAB
LD_LIB_PATHmode="$script"
fi
if [ "$LDPATH_PREFIX" != "" ]; then
LDPATH_PREFIX="`eval echo $LDPATH_PREFIX`"
if [ "$LDPATH_PREFIX" != "" ]; then
LD_LIBRARY_PATH=$LDPATH_PREFIX:$LD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
fi
fi
if [ "$LDPATH_SUFFIX" != "" ]; then
LDPATH_SUFFIX="`eval echo $LDPATH_SUFFIX`"
if [ "$LDPATH_SUFFIX" != "" ]; then
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$LDPATH_SUFFIX
LD_LIB_PATHmode="$rcfilep"
fi
fi
# Fix for Sun BugID 4663077
if [ "`uname -r`" = "5.8" ]; then
LD_LIBRARY_PATH=/usr/lib/lwp:$LD_LIBRARY_PATH
fi
export LD_LIBRARY_PATH
;;
mac*)
# DYLD_BIND_AT_LAUNCH=1
# export DYLD_BIND_AT_LAUNCH
DYLD_LIBRARY_PATH="`eval echo $DYLD_LIBRARY_PATH`"
LDPATH_MATLAB=$LDPATH_MATLAB
if [ "$DYLD_LIBRARY_PATH" != "" ]; then
DYLD_LIBRARY_PATH=$LDPATH_MATLAB:$DYLD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
else
DYLD_LIBRARY_PATH=$LDPATH_MATLAB
LD_LIB_PATHmode="$script"
fi
DYLD_FRAMEWORK_PATH="`eval echo $DYLD_FRAMEWORK_PATH`"
if [ "$DYLD_FRAMEWORK_PATH" != "" ]; then
DYLD_FRAMEWORK_PATH=$LDPATH_MATLAB:$DYLD_FRAMEWORK_PATH
else
DYLD_FRAMEWORK_PATH=$LDPATH_MATLAB
fi
if [ "$LDPATH_PREFIX" != "" ]; then
LDPATH_PREFIX="`eval echo $LDPATH_PREFIX`"
if [ "$LDPATH_PREFIX" != "" ]; then
DYLD_LIBRARY_PATH=$LDPATH_PREFIX:$DYLD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
fi
fi
if [ "$LDPATH_SUFFIX" != "" ]; then
LDPATH_SUFFIX="`eval echo $LDPATH_SUFFIX`"
if [ "$LDPATH_SUFFIX" != "" ]; then
DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$LDPATH_SUFFIX
LD_LIB_PATHmode="$rcfilep"
fi
fi
if [ -d $osg ]; then
DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$osg
fi
export DYLD_LIBRARY_PATH
export DYLD_FRAMEWORK_PATH
;;
*)
LD_LIBRARY_PATH="`eval echo $LD_LIBRARY_PATH`"
LDPATH_MATLAB=$LDPATH_MATLAB
if [ "$LD_LIBRARY_PATH" != "" ]; then
LD_LIBRARY_PATH=$LDPATH_MATLAB:$LD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
else
LD_LIBRARY_PATH=$LDPATH_MATLAB
LD_LIB_PATHmode="$script"
fi
if [ "$LDPATH_PREFIX" != "" ]; then
LDPATH_PREFIX="`eval echo $LDPATH_PREFIX`"
if [ "$LDPATH_PREFIX" != "" ]; then
LD_LIBRARY_PATH=$LDPATH_PREFIX:$LD_LIBRARY_PATH
LD_LIB_PATHmode="$rcfilep"
fi
fi
if [ "$LDPATH_SUFFIX" != "" ]; then
LDPATH_SUFFIX="`eval echo $LDPATH_SUFFIX`"
if [ "$LDPATH_SUFFIX" != "" ]; then
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$LDPATH_SUFFIX
LD_LIB_PATHmode="$rcfilep"
fi
fi
export LD_LIBRARY_PATH
;;
esac
#--------------------------------------------------------------------------
#
# Increase the data segment size to unlimited for Maple libraries.
#
if [ "$ARCH" = "mac" -o "$ARCH" = "maci" -o "$ARCH" = "maci64" ]; then
ulimit -d unlimited
fi
#
#--------------------------------------------------------------------------
#
# SHELL must currently be defined. (problem showed up on Solaris)
#
if [ "$SHELL" = "" ]; then
SHELLmode="$script"
SHELL="/bin/sh"
fi
#
#--------------------------------------------------------------------------
#
# Be sure that X sees the Matlab Resource Database (X11/R5).
#
# The critical thing that can block access to the $XAPPLRESDIR/Matlab
# database is the existence of the XUSERFILESEARCHPATH variable. If
# it exists then it does NOT automatically use $XAPPLRESDIR/Matlab even if
# it is not part of the XUSERFILESEARCHPATH path variable.
#
if [ "$XUSERFILESEARCHPATH" != "" ]; then
XAPPLRESDIRmode="$environp"
XUSERFILESEARCHPATH=$XUSERFILESEARCHPATH:$XAPPLRESDIR/%N
export XUSERFILESEARCHPATH
fi
#
BASEMATLABPATH=$MATLABPATH; export BASEMATLABPATH
#
#--------------------------------------------------------------------------
#
# Add on $HOME/matlab if available and $MATLAB/toolbox/local
#
if [ -d "$HOME"/matlab ]; then
MATLABPATH=$MATLABPATH:"$HOME"/matlab
fi
MATLABPATH=$MATLABPATH:$MATLAB/toolbox/local
#
# Remove any leading ":" character from the path. Can't use awk
# here because it fails on very long paths.
#
MATLABPATH=`echo $MATLABPATH | sed 's/^://'`
#
#--------------------------------------------------------------------------
#
# Check OS version
#
if [ -f $MATLAB_UTIL_DIR/oscheck.sh ]; then
. $MATLAB_UTIL_DIR/oscheck.sh
if [ "$oscheck_status" = "1" ]; then
exit 1
fi
fi
#
#--------------------------------------------------------------------------
#
# Set a floor on the maximum number of file descriptors that can be opened.
# The user can always set something higher before calling MATLAB.
#
FLOOR_OPEN_FILES=512
MAX_OPEN_FILES=`ulimit -n`
MAX_OPEN_FILESmode='e '
if [ $MAX_OPEN_FILES -lt $FLOOR_OPEN_FILES ]; then
ulimit -n $FLOOR_OPEN_FILES 2>/dev/null
if [ $? -eq 0 ]; then
MAX_OPEN_FILESmode='s '
MAX_OPEN_FILES=`ulimit -n`
fi
fi
#
#--------------------------------------------------------------------------
#
if [ "$showenv" = "1" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(
undefined='(variable not defined)'
echo '------------------------------------------------------------------------'
if [ "$SOURCED_DIR" != "" ]; then
echo "-> (.matlab7rc.sh) sourced from directory (DIR = $SOURCED_DIR)"
echo "-> DIR = $SOURCED_DIReval"
else
echo "-> (.matlab7rc.sh) not found."
fi
echo '------------------------------------------------------------------------'
echo ' a = argument e = environment r = rcfile s = script'
echo '------------------------------------------------------------------------'
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo "-> $MATLABmode MATLAB = $MATLAB"
echo "-> LM_LICENSE_FILE = ${LM_LICENSE_FILE-$undefined}"
echo "-> MLM_LICENSE_FILE = ${MLM_LICENSE_FILE-$undefined}"
echo "-> $AUTOMOUNT_MAPmode AUTOMOUNT_MAP = $AUTOMOUNT_MAP"
echo "-> $DISPLAYmode DISPLAY = $DISPLAY"
echo "-> $ARCHmode ARCH = $ARCH"
echo "-> $TOOLBOXmode TOOLBOX = $TOOLBOX"
if [ "$XUSERFILESEARCHPATH" != "" ]; then
echo "-> $XAPPLRESDIRmode XUSERFILESEARCHPATH = $XUSERFILESEARCHPATH"
else
echo "-> $XAPPLRESDIRmode XAPPLRESDIR = $XAPPLRESDIR"
fi
echo "-> $XKEYSYMDBmode XKEYSYMDB = $XKEYSYMDB"
#
# For maximum number of open file descriptors
#
echo "-> $MAX_OPEN_FILESmode MAX_OPEN_FILES = $MAX_OPEN_FILES"
#
# For java
#
echo "-> s _JVM_THREADS_TYPE = $_JVM_THREADS_TYPE"
echo "-> e MATLAB_JAVA = $MATLAB_JAVA"
#
echo "-> $MATLAB_MEM_MGRmode MATLAB_MEM_MGR = $MATLAB_MEM_MGR"
echo "-> $MATLAB_DEBUGmode MATLAB_DEBUG = $MATLAB_DEBUG"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
case "$ARCH" in
sol*|glnx*)
echo "-> $LD_LIB_PATHmode LD_LIBRARY_PATH = $LD_LIBRARY_PATH"
;;
*)
echo "-> $LD_LIB_PATHmode LD_LIBRARY_PATH = $LD_LIBRARY_PATH"
;;
esac
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo "-> $argument arglist = $arglist"
echo "-> $SHELLmode SHELL = $SHELL"
echo "-> e PATH = $PATH"
echo " " ) > $temp_file
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
#
# Cannot locate JRE
#
if [ ! -d "$JRE_LOC" -a "$jvmflag" = "1" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(
echo "---------------------------------------------------------------------------"
echo "Warning: Cannot locate Java Runtime Environment (JRE) . . ."
echo " "
echo " 1. Either a correct JRE was not available for redistribution when"
echo " this release was shipped, in which case you should refer to the"
echo " Release Notes for additional information about how to get it."
echo " "
echo " 2. Or you have tried to use the MATLAB_JAVA environment variable"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
if [ "$showenv" != "1" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo " to specify an alternate JRE, but MATLAB cannot find it. Please"
echo " run 'matlab -n' to determine what value you are using for"
echo " MATLAB_JAVA and fix accordingly."
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
else
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo " to specify an alternate JRE, but MATLAB cannot find it. Check"
echo " the value of MATLAB_JAVA above and fix accordingly."
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
echo "---------------------------------------------------------------------------" ) >> $temp_file
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
if [ "$showenv" != "1" ]; then
cat $temp_file
rm -f $temp_file
else
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo " " >> $temp_file
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
fi
#
if [ "$showenv" = "1" ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(
echo "-> $MATLABPATHmode MATLABPATH = (initial version)"
if [ "$MATLABPATH" != "" ]; then
for dir in `echo $MATLABPATH | tr ':' ' '`
do
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo " $dir"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
done
fi
#
echo " "
if [ -f $MATLAB/bin/$ARCH/$VARIANTmatlab -a -f $MATLAB/bin/ldd ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo '-> $MATLAB/bin/'"$ARCH/$VARIANTmatlab shared library information -"
echo "|-----------------------------------------------------------------------"
$MATLAB/bin/ldd -$ARCH $MATLAB/bin/$ARCH/$VARIANTmatlab 2>/dev/null | awk '{ print "| " $0 }'
echo "|-----------------------------------------------------------------------"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
#
echo " "
echo '-> $MATLAB/toolbox/local/pathdef.m -'
echo "|-----------------------------------------------------------------------"
if [ -f $MATLAB/toolbox/local/pathdef.m ]; then
cat $MATLAB/toolbox/local/pathdef.m | awk '{ print "| " $0 }'
else
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ' Warning: $MATLAB/toolbox/local/pathdef.m not found . . .'
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
fi
echo "|-----------------------------------------------------------------------"
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo '------------------------------------------------------------------------') >> $temp_file
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
more $temp_file
rm -f $temp_file
if [ "$showenv_all" != "1" ]; then
exit 0
fi
fi
#
# Export the variables
#
export MATLAB
export AUTOMOUNT_MAP
export DISPLAY
export ARCH
export TOOLBOX
export MATLABPATH
export XAPPLRESDIR
export XKEYSYMDB
if [ "$MATLAB_MEM_MGR" != "" ]; then
export MATLAB_MEM_MGR
fi
export MATLAB_DEBUG
export SHELL
#
# Start MATLAB unless we were asked to simply set the environment
#
if [ "$SOURCE_MATLAB_ENV_FROM" = "" ]; then
if [ ! -d $MATLAB/bin/$ARCH ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo ' matlab: No MATLAB bin directory for this machine architecture.'
echo ''
echo " ARCH = $ARCH"
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
if [ "$showenv_all" = "1" ]; then
env
fi
exit 1
fi
#
if [ ! -f $MATLAB/bin/$ARCH/$VARIANTmatlab ]; then
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo ''
echo " matlab: No MATLAB executable for this machine architecture."
echo ''
echo " $MATLAB/bin/$ARCH/$VARIANTmatlab does not exist!"
echo ''
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
if [ "$showenv_all" = "1" ]; then
env
fi
exit 1
fi
#
exec_path=$MATLAB/bin/$ARCH/$VARIANTmatlab
#
case "$ARCH" in
sol*)
if [ -d $MATLAB/rtw/bin/$ARCH ]; then
PATH=$MATLAB/rtw/bin/$ARCH:$PATH; export PATH
fi
if [ "$debugger" != "" ]; then
if [ "$MATLAB_DEBUG" = "gdb" -o "$MATLAB_DEBUG" = "xxgdb" ]; then
SHELL=/bin/sh; export SHELL
fi
if [ "$showenv_all" = "1" ]; then
env
exit 0
fi
eval exec $debugger $exec_path $arglist
else
if [ "$showenv_all" = "1" ]; then
env
exit 0
fi
eval exec $exec_path $arglist
fi
;;
*)
if [ "$debugger" != "" ]; then
if [ "$MATLAB_DEBUG" = "gdb" -o "$MATLAB_DEBUG" = "xxgdb" ]; then
SHELL=/bin/sh; export SHELL
fi
if [ "$showenv_all" = "1" ]; then
env
exit 0
fi
eval exec $debugger $exec_path $arglist
else
if [ "$showenv_all" = "1" ]; then
env
exit 0
fi
eval exec $exec_path $arglist
fi
;;
esac
fi
Ca vient d'une iso que j'ai decompressé. Ca m'a donné un repertoire avec ce script dedans. Sur xubuntu 12.04 je faisais clic droit "executer dans un terminal" et ca marchait.
J'ai essayé d'executer ce fichier dans un terminal, par la commande :
nico@nico-X75VC:~/MATLAB/bin$ ./MATLAB
./MATLAB: 1: /home/nico/MATLAB/bin/util/oscheck.sh: /lib64/libc.so.6: not found
./MATLAB: 1: exec: /home/nico/MATLAB/bin/glnxa64/MATLAB: Permission denied
La première ligne est sans importance, la deuxième montre que j'ai un problème de droit, non ?
Hors ligne
#6 Le 22/05/2014, à 16:43
- frere capsule
Re : Clic droit - executer dans un terminal
Qu'est-ce qui ne marche pas?
L'installation du paquet ou l'entrée Ouvrir dans un terminal dans Nautilus?
L'installation ca va, mais il n'y a pas de "executer dans un terminal". Note qu'il y a bien par un clic droit dans le dossier : "ouvrir un temrinal".
Hors ligne
#7 Le 22/05/2014, à 16:47
- frere capsule
Re : Clic droit - executer dans un terminal
Tout se passe dans un repertoire matlab, je devrais pas essayer un :
chmod -R 750 matlab ???
Hors ligne
#8 Le 22/05/2014, à 16:48
- Korak
Re : Clic droit - executer dans un terminal
Personnellement, j'ai installé le paquet nautilus-open-terminal via Synaptic et ça fonctionne.
Je suppose que ça doit le faire aussi avec la commande:
sudo apt-get install nautilus-open-terminal
Pas besoin de matlab.
Dernière modification par Korak (Le 22/05/2014, à 17:15)
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#9 Le 22/05/2014, à 16:51
- frere capsule
Re : Clic droit - executer dans un terminal
Non non,
matlab c'est le logiciel que je veux executer !
J'ai un repertoire matlab,
dedans un repertoire /bin,
dedans un fichier texte MATLAB
D'habitude je lance ce logiciel en faisant un clic droit sur le fichier MATLAB, puis executer dans un terminal
Hors ligne
#10 Le 22/05/2014, à 16:52
- frere capsule
Re : Clic droit - executer dans un terminal
J'ai vérifié :
nico@nico-X75VC:~/MATLAB/bin$ sudo apt-get install nautilus-open-terminal
[sudo] password for nico:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
nautilus-open-terminal est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
calligra-l10n-fr kde-l10n-engb kde-l10n-fr linux-image-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 4 non mis à jour.
Hors ligne
#11 Le 22/05/2014, à 16:55
- Korak
Re : Clic droit - executer dans un terminal
Désolé, j'avais mal compris.
Donc, tu sais ouvrir un dossier dans un terminal mais pas un fichier. Juste?
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#12 Le 22/05/2014, à 16:56
- frere capsule
Re : Clic droit - executer dans un terminal
Oui c'est ça !
Pardon, j'ai mal déballé mon problème...
Note que si c'est pas évident a résoudre, moi je veux juste pouvoir executer mon programme matlab,
donc s'il y a une autre possibilité, je prends aussi :-)
Hors ligne
#13 Le 22/05/2014, à 17:00
- Korak
Re : Clic droit - executer dans un terminal
Tu ne sais pas lancé mathlab via le tableau de bord ou en ligne de commande?
Je n'utilise pas matlab, donc je tâtonne.
Dernière modification par Korak (Le 22/05/2014, à 17:14)
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#14 Le 22/05/2014, à 17:04
- frere capsule
Re : Clic droit - executer dans un terminal
Merci Korak,
En fait a l'origine j'ai recupéré une ISO de ce logiciel.
J'avais fait la manip de la decompresser (ca donne un rep MATLAB), puis ca a toujours marché en cliquant droit sur le fichier MATLAB qui se situe dans le /bin du repertoire MATLAB.
J'ai eu plusieur changement de version d'OS (ubuntu 12, xubuntu, mint) et a chaque je fais un simple copier-coller de ce repertoire MATLAB. Et je peux le lancer sans problème.
Mais là ca va pas, j'ai plus en clic droit "executer dans un terminal" .
Hors ligne
#15 Le 22/05/2014, à 17:08
- frere capsule
Re : Clic droit - executer dans un terminal
Non je sais pas le lancer enligne de commande.
J'ai essayé :
nico@nico-X75VC:~/MATLAB/bin$ ./MATLAB
./MATLAB: 1: exec: /home/nico/MATLAB/bin/glnxa64/MATLAB: Permission denied
Apres avoir rendu executable ce fichier :
chmod u+x MATLAB
Dernière modification par frere capsule (Le 22/05/2014, à 17:08)
Hors ligne
#16 Le 22/05/2014, à 17:09
- Korak
Re : Clic droit - executer dans un terminal
Non, juste la commande:
matlab
Relis l'entièreté de la doc que je t'ai donné au post #13 car on y parle d'installer matlab.
Dernière modification par Korak (Le 22/05/2014, à 17:14)
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#17 Le 22/05/2014, à 17:10
- frere capsule
Re : Clic droit - executer dans un terminal
Non ca repond:
matlab commande introuvable
Hors ligne
#18 Le 22/05/2014, à 17:16
- frere capsule
Re : Clic droit - executer dans un terminal
Ha merci, j'avais pas vu que c'était un lien html...
J'ai donc essayé l'installation, mais j'obtiens :
root@nico-X75VC:/media/nico/OS/Users/nicolas/Downloads/Programmes/MATLAB# ./install_matlab
bash: ./install_matlab: Permission non accordée
Hors ligne
#19 Le 22/05/2014, à 17:32
- frere capsule
Re : Clic droit - executer dans un terminal
Voilà, j'ai retrouvé ce que je faisais sur xubuntu, voir ce lien :
Quelques exemples d'actions personnalisées
1-Lancer un script dans un terminal
Dans la ligne commande de l'onglet 1, tapez xfce4-terminal -e %f ; dans l'onglet Conditions d'apparition cochez les fichiers Textes et Autres.
Normalement j'ai juste besoin de ça pour pouvoir lancer mon programme....
Hors ligne
#20 Le 22/05/2014, à 17:51
- Korak
Re : Clic droit - executer dans un terminal
Ouvrir un terminal et se placer dans le répertoire d'installation.
cd CheminRepertoireMatlab/
Se connecter en tant que superutilisateur.
sudo su
Exécuter le script install.
./install
As-tu bien fait cela?
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#21 Le 22/05/2014, à 18:02
- frere capsule
Re : Clic droit - executer dans un terminal
Bah oui :
nico@nico-X75VC:~/matu2k9b_iso$ sudo su
[sudo] password for nico:
root@nico-X75VC:/home/nico/matu2k9b_iso# ./install
bash: ./install: Permission non accordée
Hors ligne
#22 Le 22/05/2014, à 18:06
- Korak
Re : Clic droit - executer dans un terminal
Ben là, je ne sais pas.....
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#23 Le 22/05/2014, à 18:07
- frere capsule
Re : Clic droit - executer dans un terminal
Ha ...
Ca marche en n'étant pas superutilisateur. J'essaye.
Hors ligne
#24 Le 22/05/2014, à 18:30
- frere capsule
Re : Clic droit - executer dans un terminal
Bon, à prioris ca a marché.
J'ai réussi à l'installer, maintenant je vois le lien que tu as donné pour essayer d'inclure un lanceur dans le dash.
Hors ligne
#25 Le 22/05/2014, à 18:50
- frere capsule
Re : Clic droit - executer dans un terminal
L'installation de matlab-support a complètement planté. Je suis passé par la logitech qui a planté.
J'ai essayé en terminal :
nico@nico-X75VC:~/matu2k9b_iso$ sudo apt-get install matlab-support
[sudo] password for nico:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
calligra-l10n-fr kde-l10n-engb kde-l10n-fr linux-image-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base libstdc++6-4.4-dev
Paquets suggérés :
gcc-4.4-locales g++-4.4-multilib gcc-4.4-doc libstdc++6-4.4-dbg
gcc-4.4-multilib libmudflap0-4.4-dev libgcc1-dbg libgomp1-dbg
libmudflap0-dbg libcloog-ppl1 libppl-c4 libppl13 libstdc++6-4.4-doc
Les NOUVEAUX paquets suivants seront installés :
cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base libstdc++6-4.4-dev matlab-support
0 mis à jour, 6 nouvellement installés, 0 à enlever et 4 non mis à jour.
Il est nécessaire de prendre 0 o/9 511 ko dans les archives.
Après cette opération, 34,7 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Ressource temporairement non disponible
Sélection du paquet gcc-4.4-base:amd64 précédemment désélectionné.
(Lecture de la base de données... 215423 fichiers et répertoires déjà installés.)
Préparation du décompactage de .../gcc-4.4-base_4.4.7-8ubuntu1_amd64.deb ...
Décompactage de gcc-4.4-base:amd64 (4.4.7-8ubuntu1) ...
Sélection du paquet cpp-4.4 précédemment désélectionné.
Préparation du décompactage de .../cpp-4.4_4.4.7-8ubuntu1_amd64.deb ...
Décompactage de cpp-4.4 (4.4.7-8ubuntu1) ...
Sélection du paquet gcc-4.4 précédemment désélectionné.
Préparation du décompactage de .../gcc-4.4_4.4.7-8ubuntu1_amd64.deb ...
Décompactage de gcc-4.4 (4.4.7-8ubuntu1) ...
Sélection du paquet libstdc++6-4.4-dev précédemment désélectionné.
Préparation du décompactage de .../libstdc++6-4.4-dev_4.4.7-8ubuntu1_amd64.deb ...
Décompactage de libstdc++6-4.4-dev (4.4.7-8ubuntu1) ...
Sélection du paquet g++-4.4 précédemment désélectionné.
Préparation du décompactage de .../g++-4.4_4.4.7-8ubuntu1_amd64.deb ...
Décompactage de g++-4.4 (4.4.7-8ubuntu1) ...
Sélection du paquet matlab-support précédemment désélectionné.
Préparation du décompactage de .../matlab-support_0.0.19_all.deb ...
Décompactage de matlab-support (0.0.19) ...
Traitement déclenché pour man-db (2.6.7.1-1) ...
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Ressource temporairement non disponible
dpkg: error processing package man-db (--unpack):
le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Traitement déclenché pour hicolor-icon-theme (0.13-1) ...
Traitement déclenché pour gnome-menus (3.10.1-0ubuntu2) ...
Traitement déclenché pour desktop-file-utils (0.22-1ubuntu1) ...
Traitement déclenché pour bamfdaemon (0.5.1+14.04.20140409-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Traitement déclenché pour mime-support (3.54ubuntu1) ...
Des erreurs ont été rencontrées pendant l'exécution :
man-db
E: Sub-process /usr/bin/dpkg returned an error code (1)
Hors ligne