Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/06/2014, à 23:50

Kcin

Vsftpd 3.0.2 avec Ubuntu 14.04 : Problème de login

Bonjour à tous big_smile

Je viens de m'installer sur mon serveur dédié kimsufi une version de Ubuntu 14.04 afin d'y mettre un environnement LAMP. Je voudrais aussi mettre vsftpd et là, j'ai un petit soucis, surement de config.

Actuellement, c'est la config par défaut avec un accès anonyme pour mes tests. Lorsque je me connecte en anonymous, çà fonctionne très bien. Mais dès que je tente avec mon compte utilisateur local, le serveur me pète un 530 : login incorrect. Je suis loin d'être assez con pour me tromper de mdp tongue

Voici le contenu de mon fichier de conf par défaut

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
#write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

Il manquerait quelque chose ?
Comme toujours, j'ai consulté le divin Google, mais je trouve peu d'article sur vsftpd ubuntu 14.04 hormis les posts sur les installations classiques. C'est pourquoi je m'adresse à vous big_smile

Merci de votre aide.

Hors ligne

#2 Le 17/06/2014, à 00:17

Kcin

Re : Vsftpd 3.0.2 avec Ubuntu 14.04 : Problème de login

Bon, j'ai réussi à me connecter avec mon compte local, mais j'ai du commenter la ligne :

auth   required        pam_shells.so

du fichier /etc/pam.d/vsftpd pour y arriver.

Est ce que cela cause une faille de sécurité ? Merci.

Hors ligne

#3 Le 17/06/2014, à 20:45

jean8888

Re : Vsftpd 3.0.2 avec Ubuntu 14.04 : Problème de login

J'ai installé vsftpd sur Ubuntu 14.04 voici ma doc.
Le user que j'utilise est www-data car je voulais un user qui a seulement les droits sur les répertoire de mon site web.

sudo apt-get install vsftpd
Config :
sudo nano /etc/vsftpd.conf

changer ses paramêtre:
local_enable=YES
write_enable=YES
anonymous_enable=NO
local_umask=022

C'est surment là que ça coince:
nano /etc/shells
ajouter
/usr/sbin/nologin

J'ai trouvé ça sur le net, j’ignore si ça peut affecter la sécurité.
sudo service vsftpd restart



Le user ftp dois avoir les droits sur l’arborescence du site web. C’est le cas de www-data (qui est owner) et de root qui a les droits sur tout.
Je ne veux pas utiliser root comme ftp user pour raisons de sécurité. Je vais utiliser www-data, pour ce faire il faut lui attibuer un mot de passe :
sudo passwd www-data
Par la suite on peut tester avec fileZilla
Par défaut www-data à droit d’écrire en dessous de /etc/var/www/html

Hors ligne

#4 Le 17/06/2014, à 21:49

Kcin

Re : Vsftpd 3.0.2 avec Ubuntu 14.04 : Problème de login

J'avais vu quelque chose comme ca aussi.
Je l'avais testé mais même problème...

Ma foi, ma solution semble bien fonctionné. Je verrai sur le long terme si j'ai des failles de sécurité.

Merci pour ta contribution big_smile

Hors ligne