Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/06/2014, à 08:43

iri24

Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Bonjour,

J'ai installé Ubuntu 14,4 à la place de W8 sur le PC suivant :
- lenovo ideacentre k410 médion ag
- i7
- Win 8 préinstallé

J'ai confirguré l'uefi/bios selon les consignes :
- uefi activé,
- boot sur la clé usb en uefi
- secure boot désactivé
- quick boot désactivé
- fast startup désactivé

A l'installation je choisi l'option effacer le disque et installer ubuntu. RAS, tout ce passe bien.

Je redémarre, le PC ne parvient pas à booter sur le seul système présent.

Je relance en live et tente une réparation avec boot repair : réparation recommandée. Pas de changement au démarrage, il ne trouve pas le système.

Je retente de nouveau avec boot repair avec les les options avancées cochées :
- eufi
- forcer un poste bloqué Win

En fin de procéssus j'ai le boot info suivant :

http://paste.ubuntu.com/7701883/

J'arrete le PC, retire la clé et relance. Là, j'ai l'invite et peu lancer sur ubuntu installé. Pour confirmer la réparation, j'arrête le PC une nouvelle fois. Je redémarre, plus rien, il ne trouve plus le système !!

Merci par avance pour votre aide et votre expérience. J'aimerais ne pas avoir à réinstaller W8.

Hors ligne

#2 Le 27/06/2014, à 10:28

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Ton Boot-Info est là (j'ai dû virer des milliers de lignes indésirables sûrement dues à un bug de Boot-Repair) :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 10382248 of /dev/sdb1 for 
                       its second stage. SYSLINUX is installed in the  
                       directory. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2       1,050,624 1,936,828,415 1,935,777,792 Data partition (Linux)
/dev/sda3   1,936,828,416 1,953,523,711    16,695,296 Swap partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             62    15,635,593    15,635,532   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        B174-00E6                              vfat       
/dev/sda2        07470c2f-fd4d-4716-a3a6-2944d33bf235   ext4       
/dev/sda3        1063bfd9-72a8-47e3-9653-576578069ba9   swap       
/dev/sdb1        B46E-E47F                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
else
  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
	else
	  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
	fi
	linux	/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-29-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
	menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Loading Linux 3.13.0-29-generic ...'
		linux	/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Loading Linux 3.13.0-29-generic ...'
		linux	/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Loading Linux 3.13.0-24-generic ...'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Loading Linux 3.13.0-24-generic ...'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=B174-00E6  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=1063bfd9-72a8-47e3-9653-576578069ba9 none            swap    sw              0       0
UUID=B174-00E6	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

========= Devices which don't seem to have a corresponding hard drive: =========

sdc sdd 

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4498/mounts) leaked on lvscan invocation. Parent PID 25105: bash
File descriptor 63 (pipe:[63825]) leaked on lvscan invocation. Parent PID 25105: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-06-25__18h34 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:Ubuntu 14.04 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="B174-00E6" TYPE="vfat"
/dev/sda2: UUID="07470c2f-fd4d-4716-a3a6-2944d33bf235" TYPE="ext4"
/dev/sda3: UUID="1063bfd9-72a8-47e3-9653-576578069ba9" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="B46E-E47F" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Jun 25 13:32 grub.d
drwxr-xr-x  2 root root     4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root  9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root  6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root  1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root   216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root   483 Apr 11 10:51 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=B174-00E6	 (sda1)
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD10EZEX-08R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  538MB   537MB   fat32                 boot
2      538MB   992GB   991GB   ext4
3      992GB   1000GB  8548MB  linux-swap(v1)


Model:  USB DISK 2.0 (scsi)
Disk /dev/sdb: 8011MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      31.7kB  8005MB  8005MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-08R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:992GB:991GB:ext4::;
3:992GB:1000GB:8548MB:linux-swap(v1)::;

BYT;
/dev/sdb:8011MB:scsi:512:512:msdos: USB DISK 2.0;
1:31.7kB:8005MB:8005MB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdc sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhost-net zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 e6 00 74 b1 4e  4f 20 4e 41 4d 45 20 20  |..)..t.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  3.9G  113M  3.8G   3% /
udev           devtmpfs   3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs      795M  1.1M  794M   1% /run
/dev/sdb1      vfat       7.5G  5.1G  2.4G  69% /cdrom
/dev/loop0     squashfs   923M  923M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      3.9G   28K  3.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      3.9G   80K  3.9G   1% /run/shm
none           tmpfs      100M   68K  100M   1% /run/user
/dev/sda1      vfat       511M  3.4M  508M   1% /mnt/boot-sav/sda1
/dev/sda2      ext4       909G  6.8G  856G   1% /mnt/boot-sav/sda2

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x09d5515d

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          62    15635593     7817766    b  W95 FAT32


EFI detected. Please check the options.

=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub       sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Custom-Repair
This setting will purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub       sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s    backup-and-rename-efi-files fake-ms-efi


Mount sda1 on /mnt/boot-sav/sda2/boot/efi
ls /mnt/boot-sav/sda2/boot/efi/1:
chroot /mnt/boot-sav/sda2 apt-get -y --force-yes update
Purge the GRUB of sda2
Install last GRUB version in /mnt/boot-sav/sda2/etc/apt/sources.list
chroot /mnt/boot-sav/sda2 apt-get -y --force-yes update
grub-efi-amd64-signed available

The following packages were automatically installed and are no longer required:
kde-l10n-engb kde-l10n-fr
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 268 not upgraded.
DEBCHECK debOK, grub-efi-amd64-signed
DEBCHECK debOK
shim-signed available
linux-signed-generic available
Please type: sudo chroot "/mnt/boot-sav/sda2" dpkg --configure -ansudo chroot "/mnt/boot-sav/sda2" apt-get install -fynsudo chroot "/mnt/boot-sav/sda2" apt-get purge -y --force-yes grub* shim-signed linux-signed*
/boot/efi detected in the fstab of sda2: UUID=B174-00E6	 (sda1)
shim-signed available
linux-signed-generic available
Then type: sudo chroot "/mnt/boot-sav/sda2" apt-get install -y --force-yes grub-efi-amd64-signed shim-signed linux-signed-generic

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Jun 25 18:37 grub.d
drwxr-xr-x  2 root root     4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root  9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root  6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root  1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root   216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root   483 Apr 11 10:51 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=B174-00E6	 (sda1)
Unhide GRUB boot menu in sda2/etc/default/grub

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Jun 25 18:37 grub.d
drwxr-xr-x  2 root root     4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root  9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root  6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root  1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root   216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root   483 Apr 11 10:51 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=B174-00E6	 (sda1)

*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 7570] [1002:675d]
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2504]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
*******

grub-install: info: executing modprobe efivars 2>/dev/null.
grub-install: info: Looking for /sys/firmware/efi ...
grub-install: info: ...found.
Installing for x86_64-efi platform.


executing efibootmgr -c -d /dev/sda -p 1 -w -L ubuntu -l EFIubuntushimx64.efi.
Installation finished. No error reported.
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI:  USB DISK 2.0 PMAP
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI:  USB DISK 2.0 PMAP
Boot0000* ubuntu,BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI:  USB DISK 2.
Wrong GRUB version detected. Please report this message to boot.repair@gmail.com

Reinstall the GRUB of sda2 into the MBR of sda
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0

chroot /mnt/boot-sav/sda2 update-grub -y
Unrecognized option `-y'
Usage: grub-mkconfig [OPTION]
Generate a grub config file

-o, --output=FILE       output generated config to FILE [default=stdout]
-h, --help              print this message and exit
-v, --version           print the version information and exit

Report bugs to <bug-grub@gnu.org>.

chroot /mnt/boot-sav/sda2 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-29-generic
Found initrd image: /boot/initrd.img-3.13.0-29-generic
Found linux image: /boot/vmlinuz-3.13.0-24-generic
Found initrd image: /boot/initrd.img-3.13.0-24-generic
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg

An error occurred during the repair.

You can now reboot your computer.

Dans ce post, j'indique que l'enfoncement de ta touche F12 au démarrage de l'ordi permet d'accéder au Boot Menu d'un Lenovo préinstallé Windows 8 : http://forum.ubuntu-fr.org/viewtopic.ph … #p15859841
Cette astuce semble avoir fonctionné pour le Lenovo Thinkpad E330 de Fredtrojan : http://forum.ubuntu-fr.org/viewtopic.ph … #p15874461
Si cette astuce ne fonctionne pas, débrouille-toi pour arriver à refaire une session sur ton Ubuntu installé - quitte à refaire une réparation avec Boot-repair si nécessaire - et refais un Boot-Info depuis la session du Ubuntu installé en suivant la procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Le but : vérifier que le menu UEFI contient bien une entrée pour Ubuntu (en pratique, il y en a deux : une qui peut démarrer avec "Secure Boot" activé ou non - elle pointe vers le fichier shimx64.efi de la partition EFI - et une qui peut démarrer seulement avec "Secure Boot" désactivé et qui pointe vers le fichier grubx64.efi de la partition EFI)

Dernière modification par malbo (Le 27/06/2014, à 10:46)

Hors ligne

#3 Le 27/06/2014, à 10:54

iri24

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Merci.

J'ai réussi à relancer ubuntu en passant une nouvelle fois pas boot repair. J'y suis, je suis pas prêt de l'arrêter ce PC ...

Pour la touche F12, désolé j'ai oublié de le préciser, mais j'ai tenté sans succès.

Je vais relancer boot repair et demander un boot info selon tes conseils.

Hors ligne

#4 Le 27/06/2014, à 11:04

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

iri24,
Je pense que tu as pris la précaution de faire une image de ton disque dur - avec Clonezilla ou avec d'autres moyens - avant de te lancer dans l'installation de Ubuntu. Tu peux confirmer et donner quelques détails sur ce que tu as fait pour pouvoir remettre un jour ton ordi dans sa config d'origine avec Windows 8 ?

Hors ligne

#5 Le 27/06/2014, à 19:41

iri24

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Bonsoir Malbo,

Non pas de retour en arrière en tout cas pas avec la version de W8 préinstallé sur mon poste.  Dans le pire des cas j'ai toujours ma licence mais je ne souhaite pas repasser sur W8. Depuis quelques mois, je passais mon temps à réinstaller ou restaurer W8. Le système est devenu instable en passant en 8.1. Perte des lecteur cartes, bugs réguliers ... Et ça aggravais à chaque nouvelle maj importante.

Quand j'ai vu qu'il fallait une nouvelle fois restaurer suite à un nouveau plantage, j'ai décidé de tout virer pour passer sur ubuntu.

Bon j'ai suivi tes conseils et refait un boot info à partir de ubuntu installé, voici ce que ça donne :
http://paste.ubuntu.com/7712386/

Dans ton premier message, tu me dis avoir fait le ménage ??? Quelles incidences ?

Encore merci pour ta patience. Bonne soirée

PS : j'ai fait un CD live avec super grub2 pur pouvoir éventuellement l'utiliser si je dois redémarrer mon poste avant avoir solutionné mes difficultés. Qu'en penses tu ?

Dernière modification par iri24 (Le 27/06/2014, à 19:44)

Hors ligne

#6 Le 28/06/2014, à 05:52

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2       1,050,624 1,936,828,415 1,935,777,792 Data partition (Linux)
/dev/sda3   1,936,828,416 1,953,523,711    16,695,296 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        B174-00E6                              vfat       
/dev/sda2        07470c2f-fd4d-4716-a3a6-2944d33bf235   ext4       
/dev/sda3        1063bfd9-72a8-47e3-9653-576578069ba9   swap       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
else
  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
	else
	  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
	fi
	linux	/boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-30-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
	menuentry 'Ubuntu, avec Linux 3.13.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-30-generic…'
		linux	/boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-30-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-30-generic…'
		linux	/boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-30-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-29-generic…'
		linux	/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-29-generic…'
		linux	/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-29-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-24-generic…'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  07470c2f-fd4d-4716-a3a6-2944d33bf235
		else
		  search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
		fi
		echo	'Chargement de Linux 3.13.0-24-generic…'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=B174-00E6  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=1063bfd9-72a8-47e3-9653-576578069ba9 none            swap    sw              0       0
UUID=B174-00E6	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


========= Devices which don't seem to have a corresponding hard drive: =========

sdb sdc 

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-RjCUFICw/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-06-27__20h27 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash vt.handoff=7

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="B174-00E6" TYPE="vfat"
/dev/sda2: UUID="07470c2f-fd4d-4716-a3a6-2944d33bf235" TYPE="ext4"
/dev/sda3: UUID="1063bfd9-72a8-47e3-9653-576578069ba9" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 juin  25 20:37 grub.d
drwxr-xr-x  2 root root      4096 juin  25 15:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root  9424 avril 11 12:51 00_header
-rwxr-xr-x 1 root root  6058 avril 10 17:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 12:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 12:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 avril 11 12:51 30_os-prober
-rwxr-xr-x 1 root root  1416 avril 11 12:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 11 12:51 40_custom
-rwxr-xr-x 1 root root   216 avril 11 12:51 41_custom
-rw-r--r-- 1 root root   483 avril 11 12:51 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=B174-00E6	 (sda1)

efibootmgr -v
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0003,0002
Boot0000* ubuntu	Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller	ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller	ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu	HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD10EZEX-08R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  538MB   537MB   fat32                 boot
2      538MB   992GB   991GB   ext4
3      992GB   1000GB  8548MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-08R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:992GB:991GB:ext4::;
3:992GB:1000GB:8548MB:linux-swap(v1)::;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=iridium)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls /boot/efi/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 e6 00 74 b1 4e  4f 20 4e 41 4d 45 20 20  |..)..t.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      909G  8.3G  855G   1% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs     795M  1.3M  794M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     3.9G   14M  3.9G   1% /run/shm
none           tmpfs     100M   84K  100M   1% /run/user
/dev/sda1      vfat      511M  3.4M  508M   1% /boot/efi

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x09d5515d

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub       sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Voici l'extrait que je voulais voir :

efibootmgr -v
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0003,0002
Boot0000* ubuntu	Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller	ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller	ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu	HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(EFIUbuntugrubx64.efi)

On y voit que ce Boot-Info a été fait depuis une session de Ubuntu lancée par l'entrée Boot0004. Cette entrée porte le nom "ubuntu" dans le menu de ton système UEFI. Il y a une autre entrée qui porte le même nom "ubuntu", c'est l'entrée Boot0000. Le fait qu'il y ait deux entrées qui portent le même nom est habituel.
Je te prie de faire la manip suivante :
1) état des lieux : tu passes la commande suivante dans un terminal :

sudo efibootmgr -v

2) à la suite dans le même terminal, tu passes la commande qui doit réécrire les fichiers .efi de Ubuntu et réenregistrer les entrées dans le menu UEFI :

sudo grub-install

3) toujours dans le même terminal, tu fais l'état des lieux en repassant la commande :

sudo efibootmgr -v

Tu postes dans ta réponse tout ce qu'il y a dans le terminal (on doit y voir les 3 commandes et leur résultat qui s'est affiché dans le terminal)

Au sujet de ma remarque dans le post #2 "Ton Boot-Info est là (j'ai dû virer des milliers de lignes indésirables sûrement dues à un bug de Boot-Repair)", je pense que la présence de ces lignes qui commencent toutes par "grub-install" ne veut pas dire que Boot-Repair a créé des problèmes et que la réparation n'est pas accomplie malgré la ligne inquiétante qu'on voit dans le Boot-Info "An error occurred during the repair.". Cela dit, moi je n'ai plus confiance en Boot-Repair.

S'agissant de super grub2, tu peux l'essayer quand tu veux : il n'est pas dangereux à ma connaissance (voir mon Tuto)

Dernière modification par malbo (Le 28/06/2014, à 06:18)

Hors ligne

#7 Le 30/06/2014, à 16:48

iri24

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Bonsoir Malbo,

Encore merci pour ton aide.

J'ai testé un démarrage avec super grub2, ça fonctionne je parviens à booter sur ubuntu installé. J'ai au moins la possibilité de démarrer le poste en passant par ce disque !

J'ai suivi tes consignes, voilà ce que ça donne :

iridium@iridium-IdeaCentre-K410:~$ sudo efibootmgr -v
[sudo] password for iridium:
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0000,0004,0005,0002,0003
Boot0000* ubuntu    Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller    ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller    ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu    Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0005* UEFI: PLDS DVD-RW DH16ACSH    ACPI(a0341d0,0)PCI(1f,2)03120a000400ffff0000CD-ROM(1,11a6,1680)AMBO
iridium@iridium-IdeaCentre-K410:~$ sudo grub-install
Installing for x86_64-efi platform.
Installation terminée, sans erreur.
iridium@iridium-IdeaCentre-K410:~$ sudo efibootmgr -v
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0000,0005,0002,0003
Boot0000* ubuntu    HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(\EFI\ubuntu\shimx64.efi)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller    ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller    ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0005* UEFI: PLDS DVD-RW DH16ACSH    ACPI(a0341d0,0)PCI(1f,2)03120a000400ffff0000CD-ROM(1,11a6,1680)AMBO
iridium@iridium-IdeaCentre-K410:~$

Qu'en penses tu ? Que me conseilles tu de faire maintenant ?

Hors ligne

#8 Le 01/07/2014, à 07:13

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

J'extrais cette ligne de ton post :

Boot0000* ubuntu    HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(\EFI\ubuntu\shimx64.efi)

Cette ligne indique qu'il y a bien un enregistrement dans le système UEFI d'une entrée "ubuntu" qui pointe vers une destination qui est correcte : c'est le fichier shimx64.efi qui est sensé lancer Ubuntu. Pour moi, ça veut dire que si tu passes par le menu* de démarrage de l'UEFI et que tu sélectionnes l'entrée "ubuntu", tu devrais voir apparaître le menu Grub.

* Je sais que tu as écrit dans le post #3 que ça ne marchait pas avec la touche F12 mais je te prie de refaire la manip d'une autre façon : avant de démarrer l'ordi, enfoncer la touche F12. Tout en maintenant la touche F12 enfoncée, allumer l'ordi. Maintenir enfoncée la touche F12 jusqu'à apparition du Boot menu. Si ça fonctionne enfin avec cette procédure, tu dois trouver l'entrée "ubuntu" parmi toutes les entrées proposées par le Boot Menu.

Dernière modification par malbo (Le 01/07/2014, à 07:22)

Hors ligne

#9 Le 01/07/2014, à 19:11

iri24

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Bonsoir Malbo,

En suivant tes conseils, j'arrive effectivement sur un menu, "Startup Device Menu".

Là j'ai 2 entrées possible. Identifiées Ubuntu toutes les deux.

Quelques soit le choix, la première ou la seconde, je ne boot pas sur le système. Rien à faire.

Désolé.

Hors ligne

#10 Le 02/07/2014, à 07:14

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

iri24 a écrit :

Quelques soit le choix, la première ou la seconde, je ne boot pas sur le système. Rien à faire.

C'est une énigme pour moi que ces entrées ne soient pas fonctionnelles. Je ne sais pas quoi te proposer pour résoudre ce problème.
Sinon, tu peux faire une installation en mode non-EFI de Ubuntu : il faut modifier le paramétrage du Bios pour enlever le mode UEFI au profit du mode Legacy. Quand c'est fait, il faut démarrer sur le support live de Ubuntu 14.04 en mode non-EFI (moyen d'identification ici) et faire l'installation en sélectionnant le choix "Supprimer Ubuntu 14.04 et réinstaller" ce qui devrait entraîner le suppression de toutes les partitions, la création automatique d'une nouvelle table de partition MSDOS (à la place de l'actuelle GPT) et la création automatique du partitionnement pour Ubuntu et son installation.

Dernière modification par malbo (Le 02/07/2014, à 07:17)

Hors ligne

#11 Le 08/07/2014, à 16:05

iri24

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Bonjour Malbo,

Désolé pour le retard mais j'étais en déplacement.

Merci pour ton aide. Je penses attendre avant de refaire mon instal. Pour l'instant je boot sur ubuntu en passant par super grup.

Dès que j'aurai testé tes conseils et refait l'installation de ubuntu, je reviendrai compléter ce post.

Bonne journée.

Hors ligne

#12 Le 08/07/2014, à 18:17

malbo

Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu

Sans faire la réinstallation pour le moment, tu peux tenter de réécrire les fichiers d'amorçage de Ubuntu en passant cette commande dans un terminal depuis une session de ton Ubuntu installé sur le disque dur :

sudo grub-install

je précise qu'il n'y a rien à mettre après "grub-install" dans la commande.
poste le résultat qui s'affichera dans le terminal

Après cela, refait une tentative en passant par la touche F12.

Dernière modification par malbo (Le 08/07/2014, à 18:18)

Hors ligne