#1 Le 27/06/2014, à 09:43
- iri24
Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Bonjour,
J'ai installé Ubuntu 14,4 à la place de W8 sur le PC suivant :
- lenovo ideacentre k410 médion ag
- i7
- Win 8 préinstallé
J'ai confirguré l'uefi/bios selon les consignes :
- uefi activé,
- boot sur la clé usb en uefi
- secure boot désactivé
- quick boot désactivé
- fast startup désactivé
A l'installation je choisi l'option effacer le disque et installer ubuntu. RAS, tout ce passe bien.
Je redémarre, le PC ne parvient pas à booter sur le seul système présent.
Je relance en live et tente une réparation avec boot repair : réparation recommandée. Pas de changement au démarrage, il ne trouve pas le système.
Je retente de nouveau avec boot repair avec les les options avancées cochées :
- eufi
- forcer un poste bloqué Win
En fin de procéssus j'ai le boot info suivant :
http://paste.ubuntu.com/7701883/
J'arrete le PC, retire la clé et relance. Là, j'ai l'invite et peu lancer sur ubuntu installé. Pour confirmer la réparation, j'arrête le PC une nouvelle fois. Je redémarre, plus rien, il ne trouve plus le système !!
Merci par avance pour votre aide et votre expérience. J'aimerais ne pas avoir à réinstaller W8.
Hors ligne
#2 Le 27/06/2014, à 11:28
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Ton Boot-Info est là (j'ai dû virer des milliers de lignes indésirables sûrement dues à un bug de Boot-Repair) :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 10382248 of /dev/sdb1 for
its second stage. SYSLINUX is installed in the
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,936,828,415 1,935,777,792 Data partition (Linux)
/dev/sda3 1,936,828,416 1,953,523,711 16,695,296 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 15,635,593 15,635,532 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 B174-00E6 vfat
/dev/sda2 07470c2f-fd4d-4716-a3a6-2944d33bf235 ext4
/dev/sda3 1063bfd9-72a8-47e3-9653-576578069ba9 swap
/dev/sdb1 B46E-E47F vfat MYLINUXLIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-29-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Loading Linux 3.13.0-29-generic ...'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Loading Linux 3.13.0-29-generic ...'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=B174-00E6 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=1063bfd9-72a8-47e3-9653-576578069ba9 none swap sw 0 0
UUID=B174-00E6 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========= Devices which don't seem to have a corresponding hard drive: =========
sdc sdd
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-4GmkbfkW/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4498/mounts) leaked on lvscan invocation. Parent PID 25105: bash
File descriptor 63 (pipe:[63825]) leaked on lvscan invocation. Parent PID 25105: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-06-25__18h34 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="B174-00E6" TYPE="vfat"
/dev/sda2: UUID="07470c2f-fd4d-4716-a3a6-2944d33bf235" TYPE="ext4"
/dev/sda3: UUID="1063bfd9-72a8-47e3-9653-576578069ba9" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="B46E-E47F" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jun 25 13:32 grub.d
drwxr-xr-x 2 root root 4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root 9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root 483 Apr 11 10:51 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=B174-00E6 (sda1)
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-08R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 992GB 991GB ext4
3 992GB 1000GB 8548MB linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 8011MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 8005MB 8005MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-08R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:992GB:991GB:ext4::;
3:992GB:1000GB:8548MB:linux-swap(v1)::;
BYT;
/dev/sdb:8011MB:scsi:512:512:msdos: USB DISK 2.0;
1:31.7kB:8005MB:8005MB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdc sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhost-net zero
ls /dev/mapper: control
ls /mnt/boot-sav/sda1/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 e6 00 74 b1 4e 4f 20 4e 41 4d 45 20 20 |..)..t.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 113M 3.8G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 795M 1.1M 794M 1% /run
/dev/sdb1 vfat 7.5G 5.1G 2.4G 69% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 28K 3.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 80K 3.9G 1% /run/shm
none tmpfs 100M 68K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 909G 6.8G 856G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x09d5515d
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 62 15635593 7817766 b W95 FAT32
EFI detected. Please check the options.
=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Custom-Repair
This setting will purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s backup-and-rename-efi-files fake-ms-efi
Mount sda1 on /mnt/boot-sav/sda2/boot/efi
ls /mnt/boot-sav/sda2/boot/efi/1:
chroot /mnt/boot-sav/sda2 apt-get -y --force-yes update
Purge the GRUB of sda2
Install last GRUB version in /mnt/boot-sav/sda2/etc/apt/sources.list
chroot /mnt/boot-sav/sda2 apt-get -y --force-yes update
grub-efi-amd64-signed available
The following packages were automatically installed and are no longer required:
kde-l10n-engb kde-l10n-fr
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 268 not upgraded.
DEBCHECK debOK, grub-efi-amd64-signed
DEBCHECK debOK
shim-signed available
linux-signed-generic available
Please type: sudo chroot "/mnt/boot-sav/sda2" dpkg --configure -ansudo chroot "/mnt/boot-sav/sda2" apt-get install -fynsudo chroot "/mnt/boot-sav/sda2" apt-get purge -y --force-yes grub* shim-signed linux-signed*
/boot/efi detected in the fstab of sda2: UUID=B174-00E6 (sda1)
shim-signed available
linux-signed-generic available
Then type: sudo chroot "/mnt/boot-sav/sda2" apt-get install -y --force-yes grub-efi-amd64-signed shim-signed linux-signed-generic
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jun 25 18:37 grub.d
drwxr-xr-x 2 root root 4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root 9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root 483 Apr 11 10:51 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=B174-00E6 (sda1)
Unhide GRUB boot menu in sda2/etc/default/grub
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jun 25 18:37 grub.d
drwxr-xr-x 2 root root 4096 Jun 25 13:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root 9424 Apr 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 Apr 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 10:51 41_custom
-rw-r--r-- 1 root root 483 Apr 11 10:51 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=B174-00E6 (sda1)
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 7570] [1002:675d]
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2504]
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
*******
grub-install: info: executing modprobe efivars 2>/dev/null.
grub-install: info: Looking for /sys/firmware/efi ...
grub-install: info: ...found.
Installing for x86_64-efi platform.
executing efibootmgr -c -d /dev/sda -p 1 -w -L ubuntu -l EFIubuntushimx64.efi.
Installation finished. No error reported.
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI: USB DISK 2.0 PMAP
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI: USB DISK 2.0 PMAP
Boot0000* ubuntu,BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0004,0002,0003
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller
Boot0004* UEFI: USB DISK 2.
Wrong GRUB version detected. Please report this message to boot.repair@gmail.com
Reinstall the GRUB of sda2 into the MBR of sda
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda2 update-grub -y
Unrecognized option `-y'
Usage: grub-mkconfig [OPTION]
Generate a grub config file
-o, --output=FILE output generated config to FILE [default=stdout]
-h, --help print this message and exit
-v, --version print the version information and exit
Report bugs to <bug-grub@gnu.org>.
chroot /mnt/boot-sav/sda2 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-29-generic
Found initrd image: /boot/initrd.img-3.13.0-29-generic
Found linux image: /boot/vmlinuz-3.13.0-24-generic
Found initrd image: /boot/initrd.img-3.13.0-24-generic
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg
An error occurred during the repair.
You can now reboot your computer.
Dans ce post, j'indique que l'enfoncement de ta touche F12 au démarrage de l'ordi permet d'accéder au Boot Menu d'un Lenovo préinstallé Windows 8 : http://forum.ubuntu-fr.org/viewtopic.ph … #p15859841
Cette astuce semble avoir fonctionné pour le Lenovo Thinkpad E330 de Fredtrojan : http://forum.ubuntu-fr.org/viewtopic.ph … #p15874461
Si cette astuce ne fonctionne pas, débrouille-toi pour arriver à refaire une session sur ton Ubuntu installé - quitte à refaire une réparation avec Boot-repair si nécessaire - et refais un Boot-Info depuis la session du Ubuntu installé en suivant la procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Le but : vérifier que le menu UEFI contient bien une entrée pour Ubuntu (en pratique, il y en a deux : une qui peut démarrer avec "Secure Boot" activé ou non - elle pointe vers le fichier shimx64.efi de la partition EFI - et une qui peut démarrer seulement avec "Secure Boot" désactivé et qui pointe vers le fichier grubx64.efi de la partition EFI)
Dernière modification par malbo (Le 27/06/2014, à 11:46)
Hors ligne
#3 Le 27/06/2014, à 11:54
- iri24
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Merci.
J'ai réussi à relancer ubuntu en passant une nouvelle fois pas boot repair. J'y suis, je suis pas prêt de l'arrêter ce PC ...
Pour la touche F12, désolé j'ai oublié de le préciser, mais j'ai tenté sans succès.
Je vais relancer boot repair et demander un boot info selon tes conseils.
Hors ligne
#4 Le 27/06/2014, à 12:04
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
iri24,
Je pense que tu as pris la précaution de faire une image de ton disque dur - avec Clonezilla ou avec d'autres moyens - avant de te lancer dans l'installation de Ubuntu. Tu peux confirmer et donner quelques détails sur ce que tu as fait pour pouvoir remettre un jour ton ordi dans sa config d'origine avec Windows 8 ?
Hors ligne
#5 Le 27/06/2014, à 20:41
- iri24
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Bonsoir Malbo,
Non pas de retour en arrière en tout cas pas avec la version de W8 préinstallé sur mon poste. Dans le pire des cas j'ai toujours ma licence mais je ne souhaite pas repasser sur W8. Depuis quelques mois, je passais mon temps à réinstaller ou restaurer W8. Le système est devenu instable en passant en 8.1. Perte des lecteur cartes, bugs réguliers ... Et ça aggravais à chaque nouvelle maj importante.
Quand j'ai vu qu'il fallait une nouvelle fois restaurer suite à un nouveau plantage, j'ai décidé de tout virer pour passer sur ubuntu.
Bon j'ai suivi tes conseils et refait un boot info à partir de ubuntu installé, voici ce que ça donne :
http://paste.ubuntu.com/7712386/
Dans ton premier message, tu me dis avoir fait le ménage ??? Quelles incidences ?
Encore merci pour ta patience. Bonne soirée
PS : j'ai fait un CD live avec super grub2 pur pouvoir éventuellement l'utiliser si je dois redémarrer mon poste avant avoir solutionné mes difficultés. Qu'en penses tu ?
Dernière modification par iri24 (Le 27/06/2014, à 20:44)
Hors ligne
#6 Le 28/06/2014, à 06:52
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,936,828,415 1,935,777,792 Data partition (Linux)
/dev/sda3 1,936,828,416 1,953,523,711 16,695,296 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 B174-00E6 vfat
/dev/sda2 07470c2f-fd4d-4716-a3a6-2944d33bf235 ext4
/dev/sda3 1063bfd9-72a8-47e3-9653-576578069ba9 swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
linux /boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-30-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
menuentry 'Ubuntu, avec Linux 3.13.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-30-generic…'
linux /boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-30-generic…'
linux /boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-30-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-29-generic…'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-29-generic…'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-07470c2f-fd4d-4716-a3a6-2944d33bf235' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 07470c2f-fd4d-4716-a3a6-2944d33bf235
else
search --no-floppy --fs-uuid --set=root 07470c2f-fd4d-4716-a3a6-2944d33bf235
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=B174-00E6 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=1063bfd9-72a8-47e3-9653-576578069ba9 none swap sw 0 0
UUID=B174-00E6 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
========= Devices which don't seem to have a corresponding hard drive: =========
sdb sdc
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-RjCUFICw/Tmp_Log: No such file or directory
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-06-27__20h27 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=07470c2f-fd4d-4716-a3a6-2944d33bf235 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="B174-00E6" TYPE="vfat"
/dev/sda2: UUID="07470c2f-fd4d-4716-a3a6-2944d33bf235" TYPE="ext4"
/dev/sda3: UUID="1063bfd9-72a8-47e3-9653-576578069ba9" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 25 20:37 grub.d
drwxr-xr-x 2 root root 4096 juin 25 15:09 grub.d.bak
total 72
-rwxr-xr-x 1 root root 9424 avril 11 12:51 00_header
-rwxr-xr-x 1 root root 6058 avril 10 17:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 12:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 12:51 20_linux_xen
-rwxr-xr-x 1 root root 11692 avril 11 12:51 30_os-prober
-rwxr-xr-x 1 root root 1416 avril 11 12:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 11 12:51 40_custom
-rwxr-xr-x 1 root root 216 avril 11 12:51 41_custom
-rw-r--r-- 1 root root 483 avril 11 12:51 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=B174-00E6 (sda1)
efibootmgr -v
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0003,0002
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-08R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 992GB 991GB ext4
3 992GB 1000GB 8548MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-08R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:992GB:991GB:ext4::;
3:992GB:1000GB:8548MB:linux-swap(v1)::;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=iridium)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls /boot/efi/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 e6 00 74 b1 4e 4f 20 4e 41 4d 45 20 20 |..)..t.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 909G 8.3G 855G 1% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 795M 1.3M 794M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 14M 3.9G 1% /run/shm
none tmpfs 100M 84K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x09d5515d
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda2, using the following options: upgrade-grub sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Voici l'extrait que je voulais voir :
efibootmgr -v
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0000,0004,0003,0002
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(EFIUbuntugrubx64.efi)
On y voit que ce Boot-Info a été fait depuis une session de Ubuntu lancée par l'entrée Boot0004. Cette entrée porte le nom "ubuntu" dans le menu de ton système UEFI. Il y a une autre entrée qui porte le même nom "ubuntu", c'est l'entrée Boot0000. Le fait qu'il y ait deux entrées qui portent le même nom est habituel.
Je te prie de faire la manip suivante :
1) état des lieux : tu passes la commande suivante dans un terminal :
sudo efibootmgr -v
2) à la suite dans le même terminal, tu passes la commande qui doit réécrire les fichiers .efi de Ubuntu et réenregistrer les entrées dans le menu UEFI :
sudo grub-install
3) toujours dans le même terminal, tu fais l'état des lieux en repassant la commande :
sudo efibootmgr -v
Tu postes dans ta réponse tout ce qu'il y a dans le terminal (on doit y voir les 3 commandes et leur résultat qui s'est affiché dans le terminal)
Au sujet de ma remarque dans le post #2 "Ton Boot-Info est là (j'ai dû virer des milliers de lignes indésirables sûrement dues à un bug de Boot-Repair)", je pense que la présence de ces lignes qui commencent toutes par "grub-install" ne veut pas dire que Boot-Repair a créé des problèmes et que la réparation n'est pas accomplie malgré la ligne inquiétante qu'on voit dans le Boot-Info "An error occurred during the repair.". Cela dit, moi je n'ai plus confiance en Boot-Repair.
S'agissant de super grub2, tu peux l'essayer quand tu veux : il n'est pas dangereux à ma connaissance (voir mon Tuto)
Dernière modification par malbo (Le 28/06/2014, à 07:18)
Hors ligne
#7 Le 30/06/2014, à 17:48
- iri24
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Bonsoir Malbo,
Encore merci pour ton aide.
J'ai testé un démarrage avec super grub2, ça fonctionne je parviens à booter sur ubuntu installé. J'ai au moins la possibilité de démarrer le poste en passant par ce disque !
J'ai suivi tes consignes, voilà ce que ça donne :
iridium@iridium-IdeaCentre-K410:~$ sudo efibootmgr -v
[sudo] password for iridium:
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0000,0004,0005,0002,0003
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0004* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0005* UEFI: PLDS DVD-RW DH16ACSH ACPI(a0341d0,0)PCI(1f,2)03120a000400ffff0000CD-ROM(1,11a6,1680)AMBO
iridium@iridium-IdeaCentre-K410:~$ sudo grub-install
Installing for x86_64-efi platform.
Installation terminée, sans erreur.
iridium@iridium-IdeaCentre-K410:~$ sudo efibootmgr -v
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0000,0005,0002,0003
Boot0000* ubuntu HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(\EFI\ubuntu\shimx64.efi)
Boot0002* UEFI: IP4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0AMBO
Boot0003* UEFI: IP6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,4)PCI(0,0)MAC(eca86b329e62,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000AMBO
Boot0005* UEFI: PLDS DVD-RW DH16ACSH ACPI(a0341d0,0)PCI(1f,2)03120a000400ffff0000CD-ROM(1,11a6,1680)AMBO
iridium@iridium-IdeaCentre-K410:~$
Qu'en penses tu ? Que me conseilles tu de faire maintenant ?
Hors ligne
#8 Le 01/07/2014, à 08:13
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
J'extrais cette ligne de ton post :
Boot0000* ubuntu HD(1,800,100000,d91c1c26-0477-46fe-90c2-a4578b555518)File(\EFI\ubuntu\shimx64.efi)
Cette ligne indique qu'il y a bien un enregistrement dans le système UEFI d'une entrée "ubuntu" qui pointe vers une destination qui est correcte : c'est le fichier shimx64.efi qui est sensé lancer Ubuntu. Pour moi, ça veut dire que si tu passes par le menu* de démarrage de l'UEFI et que tu sélectionnes l'entrée "ubuntu", tu devrais voir apparaître le menu Grub.
* Je sais que tu as écrit dans le post #3 que ça ne marchait pas avec la touche F12 mais je te prie de refaire la manip d'une autre façon : avant de démarrer l'ordi, enfoncer la touche F12. Tout en maintenant la touche F12 enfoncée, allumer l'ordi. Maintenir enfoncée la touche F12 jusqu'à apparition du Boot menu. Si ça fonctionne enfin avec cette procédure, tu dois trouver l'entrée "ubuntu" parmi toutes les entrées proposées par le Boot Menu.
Dernière modification par malbo (Le 01/07/2014, à 08:22)
Hors ligne
#9 Le 01/07/2014, à 20:11
- iri24
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Bonsoir Malbo,
En suivant tes conseils, j'arrive effectivement sur un menu, "Startup Device Menu".
Là j'ai 2 entrées possible. Identifiées Ubuntu toutes les deux.
Quelques soit le choix, la première ou la seconde, je ne boot pas sur le système. Rien à faire.
Désolé.
Hors ligne
#10 Le 02/07/2014, à 08:14
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Quelques soit le choix, la première ou la seconde, je ne boot pas sur le système. Rien à faire.
C'est une énigme pour moi que ces entrées ne soient pas fonctionnelles. Je ne sais pas quoi te proposer pour résoudre ce problème.
Sinon, tu peux faire une installation en mode non-EFI de Ubuntu : il faut modifier le paramétrage du Bios pour enlever le mode UEFI au profit du mode Legacy. Quand c'est fait, il faut démarrer sur le support live de Ubuntu 14.04 en mode non-EFI (moyen d'identification ici) et faire l'installation en sélectionnant le choix "Supprimer Ubuntu 14.04 et réinstaller" ce qui devrait entraîner le suppression de toutes les partitions, la création automatique d'une nouvelle table de partition MSDOS (à la place de l'actuelle GPT) et la création automatique du partitionnement pour Ubuntu et son installation.
Dernière modification par malbo (Le 02/07/2014, à 08:17)
Hors ligne
#11 Le 08/07/2014, à 17:05
- iri24
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Bonjour Malbo,
Désolé pour le retard mais j'étais en déplacement.
Merci pour ton aide. Je penses attendre avant de refaire mon instal. Pour l'instant je boot sur ubuntu en passant par super grup.
Dès que j'aurai testé tes conseils et refait l'installation de ubuntu, je reviendrai compléter ce post.
Bonne journée.
Hors ligne
#12 Le 08/07/2014, à 19:17
- malbo
Re : Install Unbuntu 14.4 à la place de W8 : ne boot pas sur Ubuntu
Sans faire la réinstallation pour le moment, tu peux tenter de réécrire les fichiers d'amorçage de Ubuntu en passant cette commande dans un terminal depuis une session de ton Ubuntu installé sur le disque dur :
sudo grub-install
je précise qu'il n'y a rien à mettre après "grub-install" dans la commande.
poste le résultat qui s'affichera dans le terminal
Après cela, refait une tentative en passant par la touche F12.
Dernière modification par malbo (Le 08/07/2014, à 19:18)
Hors ligne