Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 09/07/2014, à 23:45

xunil2003

Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Bonjour,

Je possède un ordinateur portable Medion AKOYA® E1318T (MD 99330).
Voir ici :
http://aldi.medion.com/md99330/fr/?refPage=medion

Sur une clé usb 2.0 ,  j'ai créé comme un dvd d'installation avec Unetbootin depuis mon pc fixe.

ici j'ai téléchargé l'image disque "kubuntu-12.04.4-desktop-i386.iso"
http://cdimage.ubuntu.com/kubuntu/relea … 4/release/
que j'ai installé sur ma clé usb avec  Unetbootin.
J'ai testé depuis mon pc fixe, si la clé usb boot, elle boot correctement sur mon pc.
   
Quand je mets la clé usb sur l'ordinateur portable Medion MD99330 et appui sur la touche F2 au démarrage je ne vois que le disque dur SATA et pas la clé usb dans le bios,  et quand je démarre le pc avec la clé usb dans le port usb 2.0, c'est windows 8 qui démarre à la place de Kubuntu.
A chaque tentative, Windows démarre d’abord, et après je vois la clé usb qui clignote, idem quand je vais dans le bios.

Comment puis je faire pour booter sur ma clé usb avec Kunbuntu 12.04.4 LTS x64 afin de supprimer windows et installer Kubuntu sur mon pc portable Medion ?

PS : Je ne sais pas si c'est un processeur 32 ou 64 bits, donc j'ai installé sur la clé usb l'image disque  "kubuntu-12.04.4-desktop-i386.iso" ors j'ai vu qu'il y a aussi l'image disque "kubuntu-12.04.4-desktop-amd64.iso " mais je ne sais pas si ça marche avec un processeur AMD A4-1200 ?

Merci.

Dernière modification par xunil2003 (Le 10/07/2014, à 09:25)

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

#2 Le 10/07/2014, à 09:38

malbo

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

xunil2003 a écrit :

PS : Je ne sais pas si c'est un processeur 32 ou 64 bits, donc j'ai installé sur la clé usb l'image disque  "kubuntu-12.04.4-desktop-i386.iso" ors j'ai vu qu'il y a aussi l'image disque "kubuntu-12.04.4-desktop-amd64.iso " mais je ne sais pas si ça marche avec un processeur AMD A4-1200 ?

Oui, tu avais gardé le meilleur pour la fin : le souci c'est la prise en charge de l'APU  AMD A4-1200 par Ubuntu. A ma connaissance, Ubuntu 14.04 et ses dérivés (*) prennent en charge "de base" cet APU alors que ce n'est pas le cas pour Ubuntu 12.04.4.
je te suggère de refaire ta liveUSB pour qu'elle utilise Ubuntu 14.04 64 bits en suivant cette procédure : http://forum.ubuntu-fr.org/viewtopic.ph … #p16713311

(*) tu peux voir dans ce fil un cas où la 14.04 a été installée et fonctionne dans un AKOYA E1318T (puisque l'objet de ce fil est un pb de WiFi, on peut supposer que l'affichage est correct) : dans ce fil, c'est Ubuntu GNOME 14.04 64 bits qui a été installé parce que je suppose que l'utilisateur préfère l'interface de bureau Gnome-shell que Unity mais - sauf si tu préfères justement Gnome-shell - je te suggère d'utiliser Ubuntu 14.04 comme je propose pour faire ta liveUSB

EDIT : je viens de me rendre compte que tu veux Kubuntu (mais qu'est-ce que vous lui trouvez à cette interface de bureau ? ) là je ne sais pas si ma procédure pour faire la liveUSB fonctionne parfaitement si on utilise l'ISO de Kubuntu. Tu devrais déjà essayer avec ma procédure Ubuntu 14.04 et si ça marche en liveUSB, tu refais ta liveUSB avec l'ISO de Kubuntu 14.04 64 bits (à télécharger à l'avance hein ?, c'est important)

Dernière modification par malbo (Le 10/07/2014, à 10:11)

Hors ligne

#3 Le 10/07/2014, à 14:06

xunil2003

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Bonjour,

Entre temps j'ai réussi a booter sur la clé usb, en trifouillant le bios
Je ne me rappel plus trop ce que j'ai fait dans le bios.
J'ai donc Kubuntu 12.04.04 qui boot sur la clé usb.
PS : Je préfére avoir une version LTS de ubuntu.

Ce pendent je n'ai pas le wifi,
Comment savoir le pilote wifi à installer ?

Sur le site internet de Medion "Références du produit", je n'ai trouvé que ça concernant le pilote :

Pilote Wi-Fi/Interfaces Bluetooth MEDION AKOYA E131xT
Version: 2010.5.0724.2013 - Win 8 32bit/Win 8 64bit

Voir ici :
http://www.medion.com/fr/service/accuei … 6842&gid=1

j'ai fait lspci, lsusb et dmesg, mais je ne sais toujours pas quel est le pilote wifi à chercher ?

kubuntu@kubuntu:~$ lspci 
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8180]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.5 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b723
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
kubuntu@kubuntu:~$
kubuntu@kubuntu:~$ lsusb 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13fe:1d23 Kingston Technology Company Inc. 
Bus 001 Device 004: ID 04f2:b3a3 Chicony Electronics Co., Ltd 
Bus 004 Device 002: ID 27c6:0002  
Bus 003 Device 002: ID 13d3:3410 IMC Networks 
Bus 005 Device 002: ID 1f75:0902  
kubuntu@kubuntu:~$
kubuntu@kubuntu:~$ iwconfig 
lo        no wireless extensions.  
eth0      no wireless extensions.  
kubuntu@kubuntu:~$ 
 kubuntu@kubuntu:~$ ifconfig 
eth0      Link encap:Ethernet  HWaddr 20:25:64:91:13:69  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:78 Base address:0x2000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:56 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3296 (3.2 KB)  TX bytes:3296 (3.2 KB)
kubuntu@kubuntu:~$ 
kubuntu@kubuntu:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-58-generic-pae (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 18:00:02 UTC 2013 (Ubuntu 3.2.0-58.88-generic-pae 3.2.53)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b93e3000 (usable)
[    0.000000]  BIOS-e820: 00000000b93e3000 - 00000000b9be4000 (reserved)
[    0.000000]  BIOS-e820: 00000000b9be4000 - 00000000b9c3c000 (usable)
[    0.000000]  BIOS-e820: 00000000b9c3c000 - 00000000ba53c000 (reserved)
[    0.000000]  BIOS-e820: 00000000ba53c000 - 00000000bf6bf000 (usable)
[    0.000000]  BIOS-e820: 00000000bf6bf000 - 00000000bfabf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfabf000 - 00000000bfbbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfbbf000 - 00000000bfbff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfbff000 - 00000000bfc00000 (usable)
[    0.000000]  BIOS-e820: 00000000bfc00000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: MEDION AKOYA E1318T/AKOYA E1318T, BIOS 601 10/24/2013
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00BFB9E000 mask FFFFFFF000 uncachable
[    0.000000]   3 base 00FFC00000 mask FFFFC00000 write-protect
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000011f000000 aka 4592M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
[    0.000000] RAMDISK: 7f10b000 - 7ffff000
[    0.000000] Allocated new RAMDISK: 36d0a000 - 37bfd964
[    0.000000] Move RAMDISK from 000000007f10b000 - 000000007fffe963 to 36d0a000 - 37bfd963
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 MEDION)
[    0.000000] ACPI: XSDT bfbfe120 00094 (v01 MEDION MEDIONAG 00000001      01000013)
[    0.000000] ACPI: FACP bfbfb000 0010C (v05 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI: DSDT bfbe9000 0E848 (v01 MEDION MEDIONAG F0000000 ACPI 00040000)
[    0.000000] ACPI: FACS bfb6e000 00040
[    0.000000] ACPI: ECDT bfbfd000 000C1 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI bfbfc000 00236 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET bfbfa000 00038 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC bfbf9000 00090 (v03 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG bfbf8000 0003C (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT bfbe8000 00028 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT bfbe6000 00044 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM bfbe5000 00055 (v03 MEDION MEDIONAG 00000000 TEST 00000000)
[    0.000000] ACPI: SSDT bfbe4000 005E0 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT bfbdf000 046B7 (v02 MEDION MEDIONAG 00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT bfbdd000 013CA (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT bfbdc000 00D4E (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT bfbda000 010C2 (v01 MEDION MEDIONAG 00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3700MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0011f000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000b93e3
[    0.000000]     0: 0x000b9be4 -> 0x000b9c3c
[    0.000000]     0: 0x000ba53c -> 0x000bf6bf
[    0.000000]     0: 0x000bfbff -> 0x000bfc00
[    0.000000]     0: 0x00100000 -> 0x0011f000
[    0.000000] On node 0 totalpages: 906574
[    0.000000] free_area_init_node: node 0, pgdat c1871a00, node_mem_map f4929200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 7401 pages used for memmap
[    0.000000]   HighMem zone: 670936 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f48df000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 897389
[    0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity  quiet splash -- BOOT_IMAGE=/casper/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 18808576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0011f000)
[    0.000000] Memory: 3544368k/4702208k available (5841k kernel code, 81928k reserved, 2858k data, 744k init, 2713348k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1880000 - 0xc193a000   ( 744 kB)
[    0.000000]       .data : 0xc15b473c - 0xc187f200   (2858 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15b473c   (5841 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:1024 16
[    0.000000] CPU 0 irqstacks, hard=f300a000 soft=f300c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 998.214 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.42 BogoMIPS (lpj=3992856)
[    0.004020] pid_max: default: 32768 minimum: 301
[    0.004080] Security Framework initialized
[    0.004118] AppArmor: AppArmor initialized
[    0.004123] Yama: becoming mindful.
[    0.004248] Mount-cache hash table entries: 512
[    0.004535] Initializing cgroup subsys cpuacct
[    0.004552] Initializing cgroup subsys memory
[    0.004573] Initializing cgroup subsys devices
[    0.004579] Initializing cgroup subsys freezer
[    0.004586] Initializing cgroup subsys blkio
[    0.004602] Initializing cgroup subsys perf_event
[    0.004659] CPU: Physical Processor ID: 0
[    0.004665] CPU: Processor Core ID: 0
[    0.004673] mce: CPU supports 6 MCE banks
[    0.013319] ACPI: Core revision 20110623
[    0.048030] ftrace: allocating 26146 entries in 52 pages
[    0.052114] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.052744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094004] CPU0: AMD A4-1200 APU with Radeon(TM) HD Graphics     stepping 01
[    0.096005] Performance Events: AMD PMU driver.
[    0.096005] ... version:                0
[    0.096005] ... bit width:              48
[    0.096005] ... generic registers:      4
[    0.096005] ... value mask:             0000ffffffffffff
[    0.096005] ... max period:             00007fffffffffff
[    0.096005] ... fixed-purpose events:   0
[    0.096005] ... event mask:             000000000000000f
[    0.096005] NMI watchdog enabled, takes one hw-pmu counter.
[    0.096005] CPU 1 irqstacks, hard=f30d2000 soft=f30d4000
[    0.096005] Booting Node   0, Processors  #1
[    0.096005] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.184068] NMI watchdog enabled, takes one hw-pmu counter.
[    0.184161] Brought up 2 CPUs
[    0.184168] Total of 2 processors activated (3992.55 BogoMIPS).
[    0.185004] devtmpfs: initialized
[    0.185004] EVM: security.selinux
[    0.185004] EVM: security.SMACK64
[    0.185004] EVM: security.capability
[    0.185004] PM: Registering ACPI NVS region at bfabf000 (1048576 bytes)
[    0.189105] print_constraints: dummy: 
[    0.189154] RTC time: 23:38:01, date: 07/09/14
[    0.189253] NET: Registered protocol family 16
[    0.189460] Trying to unpack rootfs image as initramfs...
[    0.189584] EISA bus registered
[    0.189672] Extended Config Space enabled on 0 nodes
[    0.189713] ACPI: bus type pci registered
[    0.189897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.189908] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.189914] PCI: Using MMCONFIG for extended config space
[    0.189920] PCI: Using configuration type 1 for base access
[    1.184329] bio: create slab <bio-0> at 0
[    1.184602] ACPI: Added _OSI(Module Device)
[    1.184610] ACPI: Added _OSI(Processor Device)
[    1.184617] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.184624] ACPI: Added _OSI(Processor Aggregator Device)
[    1.190759] ACPI: EC: EC description table is found, configuring boot EC
[    1.197102] ACPI: Executed 1 blocks of module-level executable AML code
[    1.209503] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    5.859701] sched: RT throttling activated
[    9.149282] Freeing initrd memory: 15312k freed
[    9.191996] ACPI: Interpreter enabled
[    9.192015] ACPI: (supports S0 S3 S4 S5)
[    9.192077] ACPI: Using IOAPIC for interrupt routing
[    9.193820] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    9.272792] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    9.273462] ACPI: No dock devices found.
[    9.273469] HEST: Table not found.
[    9.273480] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    9.274053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    9.274626] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    9.274636] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    9.274645] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    9.274654] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    9.274662] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    9.274671] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    9.274679] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    9.274687] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    9.274696] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    9.274704] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    9.274712] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    9.274720] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    9.274729] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    9.274737] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    9.274745] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    9.274753] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[    9.274762] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[    9.274770] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[    9.274793] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    9.274829] pci 0000:00:00.0: [1022:1536] type 0 class 0x000600
[    9.274918] pci 0000:00:01.0: [1002:9839] type 0 class 0x000300
[    9.274945] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    9.274966] pci 0000:00:01.0: reg 18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    9.274982] pci 0000:00:01.0: reg 20: [io  0x4000-0x40ff]
[    9.274997] pci 0000:00:01.0: reg 24: [mem 0xf0b00000-0xf0b3ffff]
[    9.275013] pci 0000:00:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    9.275077] pci 0000:00:01.0: supports D1 D2
[    9.275084] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    9.275094] pci 0000:00:01.0: PME# disabled
[    9.275134] pci 0000:00:01.1: [1002:9840] type 0 class 0x000403
[    9.275160] pci 0000:00:01.1: reg 10: [mem 0xf0b40000-0xf0b43fff 64bit]
[    9.275261] pci 0000:00:01.1: supports D1 D2
[    9.275298] pci 0000:00:02.0: [1022:1538] type 0 class 0x000600
[    9.275367] pci 0000:00:02.3: [1022:1439] type 1 class 0x000604
[    9.275479] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    9.275488] pci 0000:00:02.3: PME# disabled
[    9.275530] pci 0000:00:02.5: [1022:1439] type 1 class 0x000604
[    9.275640] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    9.275650] pci 0000:00:02.5: PME# disabled
[    9.275722] pci 0000:00:10.0: [1022:7814] type 0 class 0x000c03
[    9.275752] pci 0000:00:10.0: reg 10: [mem 0xf0b48000-0xf0b49fff 64bit]
[    9.275879] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    9.275890] pci 0000:00:10.0: PME# disabled
[    9.275946] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[    9.275979] pci 0000:00:11.0: reg 10: [io  0x4118-0x411f]
[    9.275996] pci 0000:00:11.0: reg 14: [io  0x4124-0x4127]
[    9.276012] pci 0000:00:11.0: reg 18: [io  0x4110-0x4117]
[    9.276028] pci 0000:00:11.0: reg 1c: [io  0x4120-0x4123]
[    9.276044] pci 0000:00:11.0: reg 20: [io  0x4100-0x410f]
[    9.276061] pci 0000:00:11.0: reg 24: [mem 0xf0b4f000-0xf0b4f3ff]
[    9.276138] pci 0000:00:11.0: PME# supported from D3hot
[    9.276148] pci 0000:00:11.0: PME# disabled
[    9.276178] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[    9.276199] pci 0000:00:12.0: reg 10: [mem 0xf0b4e000-0xf0b4efff]
[    9.276293] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[    9.276321] pci 0000:00:12.2: reg 10: [mem 0xf0b4d000-0xf0b4d0ff]
[    9.276424] pci 0000:00:12.2: supports D1 D2
[    9.276430] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    9.276440] pci 0000:00:12.2: PME# disabled
[    9.276472] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[    9.276493] pci 0000:00:13.0: reg 10: [mem 0xf0b4c000-0xf0b4cfff]
[    9.276603] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[    9.276631] pci 0000:00:13.2: reg 10: [mem 0xf0b4b000-0xf0b4b0ff]
[    9.276735] pci 0000:00:13.2: supports D1 D2
[    9.276741] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    9.276751] pci 0000:00:13.2: PME# disabled
[    9.276783] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[    9.276886] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[    9.276919] pci 0000:00:14.2: reg 10: [mem 0xf0b44000-0xf0b47fff 64bit]
[    9.277016] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    9.277026] pci 0000:00:14.2: PME# disabled
[    9.277051] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[    9.277154] pci 0000:00:14.7: [1022:7813] type 0 class 0x000805
[    9.277181] pci 0000:00:14.7: reg 10: [mem 0xf0b4a000-0xf0b4a0ff 64bit]
[    9.277264] pci 0000:00:18.0: [1022:1530] type 0 class 0x000600
[    9.277315] pci 0000:00:18.1: [1022:1531] type 0 class 0x000600
[    9.277362] pci 0000:00:18.2: [1022:1532] type 0 class 0x000600
[    9.277410] pci 0000:00:18.3: [1022:1533] type 0 class 0x000600
[    9.277469] pci 0000:00:18.4: [1022:1534] type 0 class 0x000600
[    9.277515] pci 0000:00:18.5: [1022:1535] type 0 class 0x000600
[    9.277682] pci 0000:01:00.0: [10ec:b723] type 0 class 0x000280
[    9.277724] pci 0000:01:00.0: reg 10: [io  0x3000-0x30ff]
[    9.277787] pci 0000:01:00.0: reg 18: [mem 0xf0a00000-0xf0a03fff 64bit]
[    9.277988] pci 0000:01:00.0: supports D1 D2
[    9.277995] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.278009] pci 0000:01:00.0: PME# disabled
[    9.284657] pci 0000:00:02.3: PCI bridge to [bus 01-01]
[    9.284675] pci 0000:00:02.3:   bridge window [io  0x3000-0x3fff]
[    9.284687] pci 0000:00:02.3:   bridge window [mem 0xf0a00000-0xf0afffff]
[    9.284862] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[    9.284940] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    9.285042] pci 0000:02:00.0: reg 18: [mem 0xf0900000-0xf0900fff 64bit]
[    9.285109] pci 0000:02:00.0: reg 20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    9.285438] pci 0000:02:00.0: supports D1 D2
[    9.285445] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.285466] pci 0000:02:00.0: PME# disabled
[    9.292672] pci 0000:00:02.5: PCI bridge to [bus 02-02]
[    9.292690] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    9.292702] pci 0000:00:02.5:   bridge window [mem 0xf0900000-0xf09fffff]
[    9.292716] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    9.292745] pci_bus 0000:00: on NUMA node 0
[    9.292764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.293099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
[    9.293221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP3._PRT]
[    9.293685]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    9.294157]  pci0000:00: ACPI _OSC control (0x1d) granted
[    9.312213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.312415] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.312639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.312841] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.313011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.313134] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.313256] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.313378] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    9.313721] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    9.313721] vgaarb: loaded
[    9.313721] vgaarb: bridge control possible 0000:00:01.0
[    9.313721] i2c-core: driver [aat2870] using legacy suspend method
[    9.313721] i2c-core: driver [aat2870] using legacy resume method
[    9.313721] SCSI subsystem initialized
[    9.313721] libata version 3.00 loaded.
[    9.313721] usbcore: registered new interface driver usbfs
[    9.313721] usbcore: registered new interface driver hub
[    9.313721] usbcore: registered new device driver usb
[    9.313721] PCI: Using ACPI for IRQ routing
[    9.317241] PCI: pci_cache_line_size set to 64 bytes
[    9.317417] reserve RAM buffer: 000000000009f400 - 000000000009ffff 
[    9.317426] reserve RAM buffer: 00000000b93e3000 - 00000000bbffffff 
[    9.317434] reserve RAM buffer: 00000000b9c3c000 - 00000000bbffffff 
[    9.317442] reserve RAM buffer: 00000000bf6bf000 - 00000000bfffffff 
[    9.317450] reserve RAM buffer: 00000000bfc00000 - 00000000bfffffff 
[    9.317457] reserve RAM buffer: 000000011f000000 - 000000011fffffff 
[    9.317711] NetLabel: Initializing
[    9.317718] NetLabel:  domain hash size = 128
[    9.317722] NetLabel:  protocols = UNLABELED CIPSOv4
[    9.317750] NetLabel:  unlabeled traffic allowed by default
[    9.317836] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    9.317836] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    9.318727] Switching to clocksource hpet
[    9.334269] AppArmor: AppArmor Filesystem Enabled
[    9.334338] pnp: PnP ACPI init
[    9.334383] ACPI: bus type pnp registered
[    9.334754] pnp 00:00: [bus 00-ff]
[    9.334763] pnp 00:00: [io  0x0000-0x0cf7 window]
[    9.334771] pnp 00:00: [io  0x0d00-0xffff window]
[    9.334779] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    9.334786] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    9.334794] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    9.334801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    9.334808] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    9.334815] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    9.334822] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    9.334829] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    9.334836] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    9.334843] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    9.334850] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    9.334857] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    9.334864] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    9.334872] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[    9.334879] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[    9.334886] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[    9.334893] pnp 00:00: [io  0x0cf8-0x0cff]
[    9.335049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    9.335223] pnp 00:01: [mem 0xfec00000-0xfec01fff]
[    9.335231] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    9.335359] system 00:01: [mem 0xfec00000-0xfec01fff] could not be reserved
[    9.335369] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    9.335380] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    9.335645] pnp 00:02: [irq 0 disabled]
[    9.335670] pnp 00:02: [irq 8]
[    9.335676] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    9.335762] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    9.335895] pnp 00:03: [io  0x0000-0x000f]
[    9.335902] pnp 00:03: [io  0x0081-0x008f]
[    9.335908] pnp 00:03: [io  0x00c0-0x00df]
[    9.335915] pnp 00:03: [dma 4]
[    9.336033] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    9.336062] pnp 00:04: [io  0x00f0-0x00fe]
[    9.336076] pnp 00:04: [irq 13]
[    9.336164] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    9.336258] pnp 00:05: [io  0x0070-0x0071]
[    9.336352] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    9.336379] pnp 00:06: [io  0x0061]
[    9.336466] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    9.336506] pnp 00:07: [io  0x0010-0x001f]
[    9.336513] pnp 00:07: [io  0x002e-0x002f]
[    9.336519] pnp 00:07: [io  0x0072-0x0073]
[    9.336525] pnp 00:07: [io  0x0080]
[    9.336532] pnp 00:07: [io  0x00b0-0x00b1]
[    9.336538] pnp 00:07: [io  0x0092]
[    9.336544] pnp 00:07: [io  0x0400-0x04cf]
[    9.336551] pnp 00:07: [io  0x04d0-0x04d1]
[    9.336557] pnp 00:07: [io  0x04d6]
[    9.336563] pnp 00:07: [io  0x0680-0x06ff]
[    9.336569] pnp 00:07: [io  0x077a]
[    9.336575] pnp 00:07: [io  0x0c00-0x0c01]
[    9.336581] pnp 00:07: [io  0x0c14]
[    9.336586] pnp 00:07: [io  0x0c50-0x0c52]
[    9.336592] pnp 00:07: [io  0x0c6c]
[    9.336598] pnp 00:07: [io  0x0c6f]
[    9.336604] pnp 00:07: [io  0x0cd0-0x0cdb]
[    9.336610] pnp 00:07: [io  0x0840-0x0847]
[    9.336766] system 00:07: [io  0x0400-0x04cf] has been reserved
[    9.336775] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    9.336783] system 00:07: [io  0x04d6] has been reserved
[    9.336791] system 00:07: [io  0x0680-0x06ff] has been reserved
[    9.336799] system 00:07: [io  0x077a] has been reserved
[    9.336807] system 00:07: [io  0x0c00-0x0c01] has been reserved
[    9.336815] system 00:07: [io  0x0c14] has been reserved
[    9.336822] system 00:07: [io  0x0c50-0x0c52] has been reserved
[    9.336831] system 00:07: [io  0x0c6c] has been reserved
[    9.336839] system 00:07: [io  0x0c6f] has been reserved
[    9.336846] system 00:07: [io  0x0cd0-0x0cdb] has been reserved
[    9.336855] system 00:07: [io  0x0840-0x0847] has been reserved
[    9.336865] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    9.336999] pnp 00:08: [mem 0x000e0000-0x000fffff]
[    9.337007] pnp 00:08: [mem 0xffc00000-0xffffffff]
[    9.337145] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    9.337155] system 00:08: [mem 0xffc00000-0xffffffff] has been reserved
[    9.337165] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    9.337224] pnp 00:09: [io  0x0060]
[    9.337231] pnp 00:09: [io  0x0064]
[    9.337244] pnp 00:09: [irq 1]
[    9.337338] pnp 00:09: Plug and Play ACPI device, IDs CEC0123 PNP0303 (active)
[    9.337389] pnp 00:0a: [irq 12]
[    9.337487] pnp 00:0a: Plug and Play ACPI device, IDs SYN1d25 PNP0f13 (active)
[    9.338749] pnp 00:0b: [io  0x0b20-0x0b3f]
[    9.338759] pnp 00:0b: IRQ 7 override to edge, high
[    9.338773] pnp 00:0b: [irq 7]
[    9.338889] pnp 00:0b: Plug and Play ACPI device, IDs SMB0001 (active)
[    9.339250] pnp: PnP ACPI: found 12 devices
[    9.339256] ACPI: ACPI bus type pnp unregistered
[    9.339264] PnPBIOS: Disabled by ACPI PNP
[    9.380733] pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xffc00000-0xffffffff]
[    9.380772] PCI: max bus depth: 1 pci_try_num: 2
[    9.380828] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b60000-0xf0b7ffff pref]
[    9.380839] pci 0000:00:02.3: PCI bridge to [bus 01-01]
[    9.380848] pci 0000:00:02.3:   bridge window [io  0x3000-0x3fff]
[    9.380859] pci 0000:00:02.3:   bridge window [mem 0xf0a00000-0xf0afffff]
[    9.380875] pci 0000:00:02.5: PCI bridge to [bus 02-02]
[    9.380883] pci 0000:00:02.5:   bridge window [io  0x2000-0x2fff]
[    9.380894] pci 0000:00:02.5:   bridge window [mem 0xf0900000-0xf09fffff]
[    9.380904] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    9.380947] pci 0000:00:02.3: PCI INT C -> GSI 50 (level, low) -> IRQ 50
[    9.380959] pci 0000:00:02.3: setting latency timer to 64
[    9.380985] pci 0000:00:02.5: PCI INT A -> GSI 48 (level, low) -> IRQ 48
[    9.380995] pci 0000:00:02.5: setting latency timer to 64
[    9.381005] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    9.381013] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    9.381020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    9.381028] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    9.381035] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    9.381043] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    9.381050] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    9.381058] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    9.381065] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    9.381073] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    9.381080] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    9.381088] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    9.381095] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    9.381103] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    9.381110] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[    9.381118] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[    9.381125] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    9.381133] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    9.381140] pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
[    9.381148] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    9.381155] pci_bus 0000:02: resource 1 [mem 0xf0900000-0xf09fffff]
[    9.381163] pci_bus 0000:02: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    9.381255] NET: Registered protocol family 2
[    9.381419] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    9.381904] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    9.382651] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    9.382997] TCP: Hash tables configured (established 131072 bind 65536)
[    9.383007] TCP reno registered
[    9.383019] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    9.383037] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    9.383241] NET: Registered protocol family 1
[    9.383279] pci 0000:00:01.0: Boot video device
[    9.383346] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.385461] pci 0000:00:10.0: PCI INT A disabled
[    9.385486] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.456259] pci 0000:00:12.0: PCI INT A disabled
[    9.456322] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.456366] pci 0000:00:12.2: PCI INT B disabled
[    9.456385] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.528259] pci 0000:00:13.0: PCI INT A disabled
[    9.528298] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.528341] pci 0000:00:13.2: PCI INT B disabled
[    9.528398] PCI: CLS 64 bytes, default 64
[    9.528410] Simple Boot Flag at 0x44 set to 0x1
[    9.528985] perf: AMD IBS detected (0x000000ff)
[    9.529533] audit: initializing netlink socket (disabled)
[    9.529560] type=2000 audit(1404949089.524:1): initialized
[    9.597256] highmem bounce pool size: 64 pages
[    9.597272] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    9.602848] VFS: Disk quotas dquot_6.5.2
[    9.603004] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    9.604489] fuse init (API version 7.17)
[    9.604735] msgmni has been set to 1652
[    9.605676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    9.605753] io scheduler noop registered
[    9.605760] io scheduler deadline registered
[    9.605784] io scheduler cfq registered (default)
[    9.606079] pcieport 0000:00:02.3: setting latency timer to 64
[    9.606170] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
[    9.606300] pcieport 0000:00:02.5: setting latency timer to 64
[    9.606375] pcieport 0000:00:02.5: irq 73 for MSI/MSI-X
[    9.606568] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    9.606577] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    9.606587] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    9.606628] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
[    9.606635] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    9.606645] pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme loaded
[    9.606695] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    9.606752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    9.632378] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.632575] ACPI: AC Adapter [AC0] (on-line)
[    9.632750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    9.632764] ACPI: Power Button [PWRB]
[    9.632912] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    9.636259] ACPI: Lid Switch [LID]
[    9.636429] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    9.636442] ACPI: Power Button [PWRF]
[    9.636629] ACPI: acpi_idle registered with cpuidle
[    9.642897] thermal LNXTHERM:00: registered as thermal_zone0
[    9.642905] ACPI: Thermal Zone [THRM] (64 C)
[    9.642963] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.642991] ACPI: Battery Slot [BAT0] (battery present)
[    9.643057] ERST: Table is not found!
[    9.643063] GHES: HEST is not enabled!
[    9.643273] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    9.643525] isapnp: Scanning for PnP cards...
[    9.657089] ACPI: Battery Slot [BAT0] (battery present)
[    9.997005] isapnp: No Plug & Play device found
[   10.009187] Linux agpgart interface v0.103
[   10.013688] brd: module loaded
[   10.016051] loop: module loaded
[   10.016401] ahci 0000:00:11.0: version 3.0
[   10.016453] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.016555] ahci 0000:00:11.0: irq 74 for MSI/MSI-X
[   10.016625] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[   10.016638] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[   10.017117] scsi0 : ahci
[   10.018625] ata1: SATA max UDMA/133 abar m1024@0xf0b4f000 port 0xf0b4f100 irq 74
[   10.019746] Fixed MDIO Bus: probed
[   10.019803] tun: Universal TUN/TAP device driver, 1.6
[   10.019809] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.019966] PPP generic driver version 2.4.2
[   10.020287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.020333] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   10.020374] ehci_hcd 0000:00:12.2: EHCI Host Controller
[   10.020495] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[   10.020512] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   10.020562] ehci_hcd 0000:00:12.2: debug port 1
[   10.020605] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0b4d000
[   10.032233] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[   10.032720] hub 1-0:1.0: USB hub found
[   10.032733] hub 1-0:1.0: 4 ports detected
[   10.032918] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   10.032967] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   10.033102] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[   10.033118] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   10.033157] ehci_hcd 0000:00:13.2: debug port 1
[   10.033182] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0b4b000
[   10.044232] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[   10.044706] hub 2-0:1.0: USB hub found
[   10.044718] hub 2-0:1.0: 4 ports detected
[   10.044909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.044959] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.045009] ohci_hcd 0000:00:12.0: OHCI Host Controller
[   10.045154] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[   10.045215] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0b4e000
[   10.104660] hub 3-0:1.0: USB hub found
[   10.104677] hub 3-0:1.0: 4 ports detected
[   10.104864] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.104915] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   10.105079] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[   10.105120] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0b4c000
[   10.164680] hub 4-0:1.0: USB hub found
[   10.164697] hub 4-0:1.0: 4 ports detected
[   10.164888] uhci_hcd: USB Universal Host Controller Interface driver
[   10.164995] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.165049] xhci_hcd 0000:00:10.0: setting latency timer to 64
[   10.165058] xhci_hcd 0000:00:10.0: xHCI Host Controller
[   10.165194] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[   10.165496] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[   10.165515] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[   10.165534] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[   10.165891] xHCI xhci_add_endpoint called for root hub
[   10.165898] xHCI xhci_check_bandwidth called for root hub
[   10.165970] hub 5-0:1.0: USB hub found
[   10.165984] hub 5-0:1.0: 2 ports detected
[   10.166123] xhci_hcd 0000:00:10.0: xHCI Host Controller
[   10.166236] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[   10.168988] xHCI xhci_add_endpoint called for root hub
[   10.168994] xHCI xhci_check_bandwidth called for root hub
[   10.169070] hub 6-0:1.0: USB hub found
[   10.169083] hub 6-0:1.0: 2 ports detected
[   10.184413] usbcore: registered new interface driver libusual
[   10.184537] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.189666] i8042: Detected active multiplexing controller, rev 1.1
[   10.191272] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.191293] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   10.191383] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   10.191458] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   10.191535] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   10.191963] mousedev: PS/2 mouse device common for all mice
[   10.192462] rtc_cmos 00:05: RTC can wake from S4
[   10.192658] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[   10.192699] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[   10.192846] device-mapper: uevent: version 1.0.3
[   10.193072] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   10.193127] EISA: Probing bus 0 at eisa.0
[   10.193133] EISA: Cannot allocate resource for mainboard
[   10.193140] Cannot allocate resource for EISA slot 1
[   10.193145] Cannot allocate resource for EISA slot 2
[   10.193151] Cannot allocate resource for EISA slot 3
[   10.193156] Cannot allocate resource for EISA slot 4
[   10.193162] Cannot allocate resource for EISA slot 5
[   10.193167] Cannot allocate resource for EISA slot 6
[   10.193173] Cannot allocate resource for EISA slot 7
[   10.193178] Cannot allocate resource for EISA slot 8
[   10.193184] EISA: Detected 0 cards.
[   10.193207] cpufreq-nforce2: No nForce2 chipset.
[   10.193325] cpuidle: using governor ladder
[   10.193519] cpuidle: using governor menu
[   10.193525] EFI Variables Facility v0.08 2004-May-17
[   10.194084] TCP cubic registered
[   10.194389] NET: Registered protocol family 10
[   10.195741] NET: Registered protocol family 17
[   10.195753] Registering the dns_resolver key type
[   10.195800] Using IPI No-Shortcut mode
[   10.196182] PM: Hibernation image not present or could not be loaded.
[   10.196210] registered taskstats version 1
[   10.200453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   10.213609]   Magic number: 6:703:655
[   10.213813] rtc_cmos 00:05: setting system clock to 2014-07-09 23:38:12 UTC (1404949092)
[   10.213834] powernow-k8: Found 1 AMD A4-1200 APU with Radeon(TM) HD Graphics     (2 cpu cores) (version 2.20.00)
[   10.213944] powernow-k8:    0 : pstate 0 (1000 MHz)
[   10.213950] powernow-k8:    1 : pstate 1 (900 MHz)
[   10.213957] powernow-k8:    2 : pstate 2 (800 MHz)
[   10.213962] powernow-k8:    3 : pstate 3 (700 MHz)
[   10.213968] powernow-k8:    4 : pstate 4 (600 MHz)
[   10.214380] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.214386] EDD information not available.
[   10.216399] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   10.216409] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   10.344256] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   10.414862] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   10.414874] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   10.485180] Initializing USB Mass Storage driver...
[   10.485530] scsi1 : usb-storage 1-1:1.0
[   10.485713] usbcore: registered new interface driver usb-storage
[   10.485720] USB Mass Storage support registered.
[   10.508248] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   10.509218] ata1.00: ATA-8: HGST HTS725050A7E630, GH2OA420, max UDMA/133
[   10.509229] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   10.510276] ata1.00: configured for UDMA/133
[   10.510670] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 GH2O PQ: 0 ANSI: 5
[   10.511021] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   10.511031] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   10.511119] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.511195] sd 0:0:0:0: [sda] Write Protect is off
[   10.511204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.511280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.528242] Refined TSC clocksource calibration: 998.127 MHz.
[   10.528257] Switching to clocksource tsc
[   10.613682] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   10.613694] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   10.704247] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[   10.813653] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   10.813666] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   10.838698]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[   10.840045] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.840206] Freeing unused kernel memory: 744k freed
[   10.840780] Write protecting the kernel text: 5844k
[   10.840831] Write protecting the kernel read-only data: 2388k
[   10.840837] NX-protecting the kernel data: 4396k
[   10.886725] udevd[98]: starting version 175
[   11.035926] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   11.068478] acpi device:00: registered as cooling_device2
[   11.068660] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[   11.068790] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.070520] wmi: Mapper loaded
[   11.123752] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.123855] r8169 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[   11.123909] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[   11.123924] r8169 0000:02:00.0: setting latency timer to 64
[   11.124097] r8169 0000:02:00.0: irq 78 for MSI/MSI-X
[   11.125253] r8169 0000:02:00.0: eth0: RTL8101e at 0xf8442000, 20:25:64:91:13:69, XID 04900000 IRQ 78
[   11.171187] sdhci: Secure Digital Host Controller Interface driver
[   11.171197] sdhci: Copyright(c) Pierre Ossman
[   11.171925] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[   11.171982] sdhci-pci 0000:00:14.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.172122] mmc0: no vmmc regulator found
[   11.172200] Registered led device: mmc0::
[   11.181351] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[   11.337723] mmc0: new high speed SDHC card at address b368
[   11.342911] mmcblk0: mmc0:b368 NCard 3.73 GiB 
[   11.344067] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[   11.344385]  mmcblk0: p1
[   11.485290] scsi 1:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[   11.487145] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   11.488477] sd 1:0:0:0: [sdb] 4029440 512-byte logical blocks: (2.06 GB/1.92 GiB)
[   11.488967] sd 1:0:0:0: [sdb] Write Protect is off
[   11.488978] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   11.489466] sd 1:0:0:0: [sdb] No Caching mode page found
[   11.489473] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   11.492222] sd 1:0:0:0: [sdb] No Caching mode page found
[   11.492232] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   11.496528]  sdb: sdb1
[   11.499716] sd 1:0:0:0: [sdb] No Caching mode page found
[   11.499725] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   11.499734] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[   11.547855] generic-usb 0003:27C6:0002.0002: hiddev0,hidraw0: USB HID v1.00 Device [GOODIX  Goodix_GT91X_USB] on usb-0000:00:13.0-1/input1
[   11.547903] usbcore: registered new interface driver usbhid
[   11.547909] usbhid: USB HID core driver
[   11.784252] usb 3-3: new full-speed USB device number 2 using ohci_hcd
[   12.808823] Btrfs loaded
[   12.822588] xor: automatically using best checksumming function: pIII_sse
[   12.840036]    pIII_sse  :  3449.000 MB/sec
[   12.840043] xor: using function: pIII_sse (3449.000 MB/sec)
[   12.841438] device-mapper: dm-raid45: initialized v0.2594b
[   15.235107] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   35.803738] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.951813] udevd[1479]: starting version 175
[   36.669292] lp: driver loaded but no devices found
[   36.715627] Bluetooth: Core ver 2.16
[   36.715682] NET: Registered protocol family 31
[   36.715689] Bluetooth: HCI device and connection manager initialized
[   36.715698] Bluetooth: HCI socket layer initialized
[   36.715705] Bluetooth: L2CAP socket layer initialized
[   36.715732] Bluetooth: SCO socket layer initialized
[   36.730000] ppdev: user-space parallel port driver
[   36.760323] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.760333] Bluetooth: BNEP filters: protocol multicast
[   36.859318] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   36.872489] Bluetooth: RFCOMM TTY layer initialized
[   36.872506] Bluetooth: RFCOMM socket layer initialized
[   36.872513] Bluetooth: RFCOMM ver 1.11
[   37.089210] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   37.089222] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   37.091723] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   37.093337] usbcore: registered new interface driver btusb
[   37.289419] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[   37.289431] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[   37.497474] Linux video capture interface: v2.00
[   37.661635] device-mapper: multipath: version 1.3.1 loaded
[   37.687582] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3a3)
[   37.740221] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input5
[   37.740929] usbcore: registered new interface driver uvcvideo
[   37.740937] USB Video Class driver (1.1.1)
[   38.006594] init: failsafe main process (1783) killed by TERM signal
[   38.271141] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800
[   38.315318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   38.639828] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
[   38.639951] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[   38.645513] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[   39.258586] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   39.263954] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[   39.297610] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   39.297766] snd_hda_intel 0000:00:14.2: irq 80 for MSI/MSI-X
[   39.492255] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[   39.492770] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[   39.852978] r8169 0000:02:00.0: eth0: link down
[   39.853429] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.854497] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.366282] init: udev-fallback-graphics main process (2584) terminated with status 1
[  129.564896] mtrr: no MTRR for e0000000,1000000 found
[  531.516664] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[  531.537210] scsi2 : usb-storage 6-1:1.0
[  532.537537] scsi 2:0:0:0: Direct-Access     UDISK    PDI01_128 BCI3.0 1.00 PQ: 0 ANSI: 5
[  532.544992] sd 2:0:0:0: [sdc] 243728384 512-byte logical blocks: (124 GB/116 GiB)
[  532.545237] sd 2:0:0:0: [sdc] Write Protect is off
[  532.545253] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  532.545469] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[  532.548701] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  532.549766]  sdc: unknown partition table
[  532.550927] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[  615.696350] usb 6-1: USB disconnect, device number 2
[  836.924355] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[  836.972291] xhci_hcd 0000:00:10.0: device LPM test failed, may disconnect and re-enumerate
[  836.977299] scsi3 : usb-storage 5-1:1.0
[  837.977709] scsi 3:0:0:0: Direct-Access     UDISK    PDI01_128 BCI3.0 1.00 PQ: 0 ANSI: 5
[  837.981354] sd 3:0:0:0: Attached scsi generic sg2 type 0
[  837.984653] sd 3:0:0:0: [sdc] 243728384 512-byte logical blocks: (124 GB/116 GiB)
[  837.984907] sd 3:0:0:0: [sdc] Write Protect is off
[  837.984923] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  837.985159] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[  837.991667]  sdc: unknown partition table
[  837.992983] sd 3:0:0:0: [sdc] Attached SCSI removable disk
kubuntu@kubuntu:~$

Comment puis-je faire ?

Merci.

Dernière modification par xunil2003 (Le 10/07/2014, à 14:08)

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

#4 Le 10/07/2014, à 14:22

michel_04

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Bonjour,

xunil2003 a écrit :

PS : Je préfére avoir une version LTS de ubuntu.

Ubuntu 14.04 est une LTS (5ans).

A+

:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.

Hors ligne

#5 Le 10/07/2014, à 14:23

malbo

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

xunil2003,
Tu as parfaitement raison de chercher une solution pour te connecter en WiFi en session live. Par contre, il existe une rubrique spéciale du forum pour les pb de WiFi : Configuration WiFi. Donc si personne ne sait t'aider ici, je te propose de créer une discussion en parallèle avec celle-ci dans la rubrique WiFi. Dans le premier post de cette nouvelle discussion, tu peux donner pour information le lien vers la présente discussion. Si tu parviens à trouver une solution, tu pourras faire ton install et donner des nouvelles ici.

Hors ligne

#6 Le 10/07/2014, à 14:30

malbo

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

D'autre part, je vois ceci dans ton post #3 : Ubuntu 3.2.0-58.88-generic-pae
C'est une version 32 bits. Cela ne va pas. Et en plus, ce n'est pas la version 12.04.4 mais la version "de base". Tu devrais remplacer ta liveUSB 12.04 32 bits par Ubuntu 14.04 64 bits comme je t'ai proposé plus haut.

EDIT : tu semblais pas arriver à trouver l'info : ton APU est 64 bits comme c'est précisé dans la champ "Data width" de sa spec : http://www.cpu-world.com/CPUs/Jaguar/AM … -1200.html
De plus, je t'ai indiqué un lien plus haut (c'est ça) dans lequel on voit clairement que c'est une install 64 bits qui a été faite puisque c'est précisé "AMD64"

Dernière modification par malbo (Le 10/07/2014, à 15:34)

Hors ligne

#7 Le 10/07/2014, à 16:14

xunil2003

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Re,

J'ai re fait la clé usb avec kunbuntu 14.04 LTS x64.
Mais c'est pareil, je n'ai pas le wifi ?

Merci.

Dernière modification par xunil2003 (Le 10/07/2014, à 16:38)

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

#8 Le 10/07/2014, à 16:22

Fly0s

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Salut !

Pourquoi tu tiens tant à utiliser la 12.04 ?

Kubuntu 14.04 est une LTS sur 5 ans, ça te laisserait encore plus de marges que la 12.04. Et qui sait, peut-être que tes problèmes de Wifi seront réglés sur la 14.04, qui est plus à jour ?

Hors ligne

#9 Le 10/07/2014, à 16:42

xunil2003

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Re,

J'ai rectifiié,  c'est l'habitude de l'ancienne version, je confirme de nouveau j'ai refait la clé usb avec Kubuntu 14.04 LTS x64.
Je boot bien dessus mais y pas le wifi.
http://forum.ubuntu-fr.org/viewtopic.ph … #p17441521

Merci.

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

#10 Le 11/07/2014, à 11:08

xunil2003

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Bonjour,

Le clavier n'est pas en français.
Y a til un moyen de le mettre en français en ligne de commande directement ?

Merci.

Dernière modification par xunil2003 (Le 11/07/2014, à 11:08)

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

#11 Le 11/07/2014, à 13:02

xunil2003

Re : Installer Kubuntu sur le portable Medion AKOYA® E1318T (MD 99330)

Re,

C'est bon j'ai trouvé.
http://doc.ubuntu-fr.org/tutoriel/configurer_le_clavier

setxkbmap fr

Merci.

Dernière modification par xunil2003 (Le 11/07/2014, à 13:02)

- AMD R9 5950x 64 Go Ram / Intel Pentium I7 960 - 12 Go Ram - 6 T0 - Kubuntu 12.04 x64 / Kubuntu 14.04 x64 / Kubuntu 16.04 x64 / Kubuntu 18.04 x64 /  Kubuntu 20.04 x64 / Mint
- DreamPlug Multi Boot / Marvel 1.22 Ghz / Architecture ARM / 512 Mo Ram / Carte-sd 16 Go class 10 / 5 Watts / Debian Squeeze 2.6.39.4
- Raspberry PI 1 / Raspberry PI 2 / Raspberry PI 3 / Raspberry PI 4 : 4Gb
JE SUIS CHARLIE

Hors ligne

Pages : 1