Pages : 1
#1 Le 03/05/2008, à 22:40
- syl.ubuntu
HD radeon 2600 + écran Delium
Bonjour à tous,
je m'arrache les cheveux pour configurer une machine et son écran avec une 7.10.
La carte graphique est une Radeon HD 2600 Pro, mais elle n'est à priori pas reconnue
patmrose@patmrose-desktop:~$ lspci |grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9589
l'écran est un DELIUM de résolution 1680 par 1050 (22' 16/10) fréquence de fonctionnement sous vista : 60 Hz.
Ce que j'ai déjà fait:
- installer les derniers drivers proprios ATI avec envy.
À priori ça marche:
patmrose@patmrose-desktop:~$ grep "(EE)" /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
patmrose@patmrose-desktop:~$ glxinfo | grep "direct rendering"
direct rendering: Yes
patmrose@patmrose-desktop:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 2600 Pro
OpenGL version string: 2.1.7170 Release
patmrose@patmrose-desktop:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
4591 frames in 5.0 seconds = 918.200 FPS
5552 frames in 5.0 seconds = 1110.400 FPS
- régler mon xorg.conf pour: prendre en compte les fréquence d'affichage:
patmrose@patmrose-desktop:~$ sudo ddcprobe | grep monitorrange
monitorrange: 31-83, 56-76
patmrose@patmrose-desktop:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: ATI ATOMBIOS
vendor: (C) 1988-2005, ATI Technologies Inc.
product: -PC 01.00
memory: 16384kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x256
mode: 1024x768x256
mode: 1280x1024x256
mode: 640x480x64k
mode: 800x600x64k
mode: 1024x768x64k
mode: 1280x1024x64k
mode: 320x200x64k
mode: 1600x1200x256
mode: 1600x1200x32k
mode: 1600x1200x64k
edid:
edid: 1 3
id: 2262
eisa: BTC2262
serial: 00000000
manufacture: 26 2007
input: sync on green, analog signal.
screensize: 47 29
gamma: 2.200000
dpms: RGB, active off, suspend, standby
timing: 720x400@70 Hz (VGA 640x400, IBM)
timing: 720x400@88 Hz (XGA2)
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@72 Hz (VESA)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@72 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@70 Hz (VESA)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)
ctiming: 1400x1050@75
ctiming: 1152x864@75
ctiming: 1440x1440@60
ctiming: 1440x1440@75
ctiming: 1680x1680@60
dtiming: 1680x1050@77
monitorrange: 31-83, 56-76
monitorserial: 72600411
monitorname: LE2262
- généré le modelines et les ajouter au xorg.conf:
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
- tout ça n'y fait rien.Pour l'instant j'ai ça en xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Default Card"
Driver "fglrx"
Busid "PCI:1:0:0"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "MonitorLayout" "TMDS"
EndSection
Section "Monitor"
Identifier "LE2262"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
Horizsync 30-82
Vertrefresh 56-76
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Default Card"
Monitor "LE2262"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1680 1050
Modes "1680x1050@60" "1680x1050@75" "1600x1024@60" "1920x1200@60" "1440x900@60" "1440x900@75" "1280x800@60" "1280x768@75" "1280x800@75" "1280x720@60" "1280x768@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
- j'arrive à avoir la résolution 1900 1200, mais jamais 1680x1050.
Ce qui m'embête aussi c'est le contenu de Xorg.0.log:
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 146.0 MHz Image Size: 473 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 160 MHz
on voit que fglrx ne supporte pas 1680x1050.
y'a toute une série de modelines dans ce fichier
**) fglrx(0): *Mode "1920x1200@60": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200@60" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 +hsync
mains aucune pour ma résolution :-( .....
Voilà je sais qu'il y avait un bug pour les drivers ATI pour les résolutions 1680x1050, mais je sais aussi que ça a été résolu en février et j'ai mis les derniers drivers.
Merci de toute aide, remarques et sugestions ......
bonne soirée à tous,
Syl.
Hors ligne
#2 Le 04/05/2008, à 10:05
- syl.ubuntu
Re : HD radeon 2600 + écran Delium
bonjour,
je fais remonter mon post avec une question:
à quoi correspond le Depth 24 dans le xorg ?
Vu que sous vista il y a un truc genre profondeur de couleur 32 bits (mais je n'ai jamais vu de xorg avec 32 ici).
Je ne sais pas si c'est la carte graphique ou l'écran qui est mal configuré.
Syl.
Hors ligne
#3 Le 09/05/2008, à 16:12
- syl.ubuntu
Re : HD radeon 2600 + écran Delium
un petit up :-)
Syl.
Hors ligne
Pages : 1