Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 01/08/2014, à 20:13

MiniTux90

[Résolu] Installation sur Asus N56VJ

Bonsoir tout le monde ! Je possède actuellement un pc portable Asus N56VJ qui tourne sous Windows 7 64, mais par soucis de rapidité notamment, j'aimerais faire un dual boot avec Ubuntu. Jusque la, pas de soucis pour moi, mais je me posais quelques questions :
-Sachant que je voudrais utiliser exclusivement le gpu intel, sauf de très rares occasions ou la carte Nvidia sera sollicitée, Prime semble-t-il une bonne solution ?
-Quel environnement et quels logiciels me conseillerez-vous pour avoir un système fluide, pratique et sans trop d'accès disque ? (Le disque dur est le point faible du PC)
-Enfin, si quelqu'un possède un Asus N56 ou N76 sous Ubuntu ou dérivés, pourrrait-t-il me dire si le système fonctionne bien dessus ?
Merci d'avance pour toutes vos réponses qui je pense m'aideront beaucoup big_smile
Bonne soirée à tous !

Dernière modification par MiniTux90 (Le 09/08/2014, à 19:47)


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#2 Le 01/08/2014, à 21:24

michel_04

Re : [Résolu] Installation sur Asus N56VJ

MiniTux90 a écrit :

-Enfin, si quelqu'un possède un Asus N56 ou N76 sous Ubuntu ou dérivés, pourrrait-t-il me dire si le système fonctionne bien dessus ?

À priori, oui. voir http://doc.ubuntu-fr.org/liste_portables_asus#n

A+

Hors ligne

#3 Le 02/08/2014, à 06:04

malbo

Re : [Résolu] Installation sur Asus N56VJ

MiniTux90 a écrit :

Je possède actuellement un pc portable Asus N56VJ qui tourne sous Windows 7 64

Il faut vérifier si Windows 7 est installé en mode EFI ou en mode Bios (non-EFI) afin d'installer Ubuntu dans le même mode que Windows 7. Les explications sont dans ce tuto : http://forum.ubuntu-fr.org/viewtopic.php?id=986671
Il y est indiqué la façon de déterminer le mode d'installation EFI ou non pour Windows 7 : c'est la méthode exposée dans ce doc de Tsintao : http://forum.ubuntu-fr.org/viewtopic.ph … 1#p9714181

Hors ligne

#4 Le 03/08/2014, à 19:57

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Pas de soucis pour ça, le pc était sous 8 et je l'ai passé sous 7 en mode BIOS, je pense que ca sera plus simple ainsi smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#5 Le 04/08/2014, à 06:10

malbo

Re : [Résolu] Installation sur Asus N56VJ

Il faudra donc installer Ubuntu en mode Bios (non-EFI) et pour ce faire il conviendra de démarrer l'ordi sur ton support live (liveDVD ou liveUSB) de Ubuntu en mode non-EFI. Le moyen de bien identifier le mode est présenté dans 2.5 Identifier si l'ordinateur démarre sur le CD (ou la live USB) en mode EFI. Par conséquent, il faudra que tu vois cet écran pour être sûr de démarrer en mode non-EFI et à partir de là, tu pourras lancer ton installation.

Dernière modification par malbo (Le 04/08/2014, à 06:13)

Hors ligne

#6 Le 08/08/2014, à 19:45

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Bonsoir ! Comme j'installe via une clé usb créée avec LinuxLive USB creator, je ne vois pas cette fameuse image, et je me retrouve confronté à un autre soucis : l'installateur voit mon disque dur comme étant vide ! Or, j'ai 500gb d'alloué à Windows 7 et j'aimerais bien conserver mes données, que faire ? Merci d'avance car la je suis perdu sad


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#7 Le 09/08/2014, à 04:27

malbo

Re : [Résolu] Installation sur Asus N56VJ

Je te prie de réaliser un Boot-Info en suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Tu posteras l'URL du Boot-Info dans ta réponse. Je pourrai tenter de comprendre ce qui se passe en étudiant ce Boot-Info.

Hors ligne

#8 Le 09/08/2014, à 14:43

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Hello, je viens aux nouvelles ! Hier soir j'ai sauvegardé toutes mes données et tenté plusieurs choses : réinstallation de Windows 7 puis Ubuntu -> pas de changement
Ubuntu puis Windows 7 -> L'installateur refuse d'installer sur une table de partition GPT (alors que Ubuntu a été booté en mode non-EFI)
Du coup, la je réinstalle Windows 7 sur une partition de 640go, en laissant 70go de libres pour Ubuntu. Suite à cette installation, je réaliserai la procédure de malbo et vous posterai le résultat. Merci de votre aide ! smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#9 Le 09/08/2014, à 15:08

Korak

Re : [Résolu] Installation sur Asus N56VJ

Bonjour,

MiniTux90 a écrit :

L'installateur refuse d'installer sur une table de partition GPT (alors que Ubuntu a été booté en mode non-EFI)

Si tu as une table de partition GPT, c'est que ton BIOS est en mode EFI/UEFI.

Donc, il faut installer Windows et Ubuntu en mode EFI/UEFI.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#10 Le 09/08/2014, à 15:25

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Justement, à ce propos, l'utilitaire de disque d'Ubuntu voit bien ma partition Windows, me signale que je suis en GPT, mais n'est pas capable de formater le disque. Et l'installateur ne voit toujours rien


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#11 Le 09/08/2014, à 15:29

Korak

Re : [Résolu] Installation sur Asus N56VJ

Pour un dualboot Windows/Ubuntu, il ne faut pas formater le disque-dur. Sinon, tu perds tout. Windows y compris.

Et l'installeur d'Ubuntu est mal foutu, il ne voit pas Windows. Il faut passer par "Autre chose" quand l'installeur te demande ce qu'il faut faire.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#12 Le 09/08/2014, à 15:34

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

C'est justement quand je passe par "autre chose" que je ne vois pas ma partition Windows ^^ il me dit donc que j'ai un espace non alloué de 750go (taille de mon DD). Et sinon pour ce qui est d'un dual-boot Windows Ubuntu je n'en suis pas à mon coup d'essai, mais la c'est la première fois que je me retrouve confronté à un soucis de ce genre. Pour malbo, voici le Boot-info créé en live USB avec Ubuntu 14.04 : http://paste.ubuntu.com/7998933/


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#13 Le 09/08/2014, à 15:38

Korak

Re : [Résolu] Installation sur Asus N56VJ

As-tu réduit la partition de Windows pour avoir un espace libre?

Espace libre veut dire: pas de partition à cet endroit.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#14 Le 09/08/2014, à 16:02

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Comme dit précédemment, j'ai, laissé 70Go d'espace disque libre (donc bien sans aucune partition) pour l'installation d'Ubuntu. Cet espace est visible dans l'utilitaire de disque de Ubuntu, mais non modifiable. Je pense qu'il y a un conflit entre le MBR de Windows 7 et Ubuntu qui voit mon disque comme étant en GPT hmm


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#15 Le 09/08/2014, à 16:50

malbo

Re : [Résolu] Installation sur Asus N56VJ

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Windows 7/8/2012 is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1981344 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,321,166,847 1,321,164,800   7 NTFS / exFAT / HPFS


GUID Partition Table detected, but does not seem to be used.

Partition    Start Sector    End Sector  # of Sectors System

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 2000 MB, 2000570368 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3907364 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             63     3,907,363     3,907,301   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        ACF8D8F4F8D8BDB0                       ntfs       
/dev/sdb1        02A5-C30D                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-wDR1zVHk/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-wDR1zVHk/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4741/mounts) leaked on lvscan invocation. Parent PID 10072: bash
File descriptor 63 (pipe:[45397]) leaked on lvscan invocation. Parent PID 10072: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-09__14h30 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="ACF8D8F4F8D8BDB0" TYPE="ntfs"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="02A5-C30D" TYPE="vfat"


1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda1.

sda	: GPT,	no-BIOS_boot,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:


                                                                          
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables.  Or perhaps you deleted the GPT table, and are now using an
msdos partition table.  Is this a GPT partition table?
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start  End  Size  File system  Name  Flags


Model: Kingston DataTraveler G2 (scsi)
Disk /dev/sdb: 2001MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  2001MB  2001MB  primary  fat32        boot

=================== parted -lm:


                                                                          
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables.  Or perhaps you deleted the GPT table, and are now using an
msdos partition table.  Is this a GPT partition table?
BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA Hitachi HTS72757;

BYT;
/dev/sdb:2001MB:scsi:512:512:msdos:Kingston DataTraveler G2;
1:32.3kB:2001MB:2001MB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 5f bf 4e 00 00 00 00  |........._.N....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b0 bd d8 f8 f4 d8 f8 ac  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.7G  120M  1.6G   8% /
udev           devtmpfs   1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs      340M  1.1M  339M   1% /run
/dev/sdb1      vfat       1.9G  1.2G  738M  62% /cdrom
/dev/loop0     squashfs   923M  923M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.7G  1.2M  1.7G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.7G   76K  1.7G   1% /run/shm
none           tmpfs      100M   76K  100M   1% /run/user
/dev/sda1      fuseblk    630G   14G  617G   3% /mnt/boot-sav/sda1

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd4341003

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048  1321166847   660582400    7  HPFS/NTFS/exFAT

Disk /dev/sdb: 2000 MB, 2000570368 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3907364 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00061169

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63     3907363     1953650+   b  W95 FAT32


No OS or WinEFI system

=================== Default settings
Recommended-Repair
This setting would not act on the MBR.
Additional repair would be performed:  repair-filesystems

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

L'anomalie se trouve dans cette partie :

=================== parted -l:


                                                                          
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables.  Or perhaps you deleted the GPT table, and are now using an
msdos partition table.  Is this a GPT partition table?
Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

C'est ce qu'il y a exactement là qui est important :

Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables.  Or perhaps you deleted the GPT table, and are now using an
msdos partition table.  Is this a GPT partition table?

Cela veut dire qu'initialement, la table de partition du disque dur était GPT mais que cette table de partition a été mal transformée en MSDOS ce qui fait qu'il reste des traces de l'ancien partitionnement GPT. C'est ça qui bloque.
Dans cette discussion : http://forum.ubuntu-fr.org/viewtopic.ph … #p13216561
Le même symptôme que toi. La solution est indiquée au post #9 de la discussion

Hors ligne

#16 Le 09/08/2014, à 17:37

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Ca marche ! Avec la solution proposée au post que malbo m'a envoyé, j'ai réussi à faire le dual boot big_smile
Mille merci, ca change d'avoir la rapidité d'Ubuntu et de pouvoir garder Windows 7 pour quelques jeux. Merci encore, et bonne fin de journée à vous smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#17 Le 09/08/2014, à 17:59

malbo

Re : [Résolu] Installation sur Asus N56VJ

Je te prie de modifier le titre de ton premier message pour qu'il devienne :

[Résolu] Installation sur Asus N56VJ

Hors ligne

#18 Le 09/08/2014, à 19:46

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Oui je n'y avais pas encore pensé désolé smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#19 Le 10/08/2014, à 04:10

malbo

Re : [Résolu] Installation sur Asus N56VJ

MiniTux90,
Sur la base du descriptif que je vois dans ta signature pour ton ordi Asus N56VJ, j'ai trouvé ce modèle ASUS N56VJ-S3005H visible ici
Pourrais-tu confirmer qu'il s'agit de ce modèle ? Si ce n'est pas ça, peux-tu préciser le nom complet du modèle car je voudrais l'ajouter dans la Liste des portables « Asus »
Peux-tu confirmer (ou pas) que Windows 8 était préinstallé dans cet ordi ? Je pose cette question parce que j'ai l'impression que le pb que tu as rencontré, ça se passe quasiment tout le temps avec les ordis qui étaient préinstallés Windows 8. Je n'en suis pas sûr mais je pense que ça se produit quand on cherche à remplacer Windows 8 préinstallé par Windows 7 (les modalités pratiques qui font que l'accident se produit, je ne les connais pas mais c'est le contexte général)

Dernière modification par malbo (Le 10/08/2014, à 04:19)

Hors ligne

#20 Le 14/08/2014, à 21:12

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Bonsoir. Oui, c'est bien le N56VJ-S3005H que je possède, et il était préinstallé avec Windows 8 64bits, que j'avais remplacé par Windows 7 uniquement. Si cela peut t'aider, aucun soucis depuis l'installation, Prime marche super bien, il y a juste la batterie qui se décharge plus vite que sous Windows 7. Bonne soirée et n'hésite pas si tu as besoin de plus d'infos smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#21 Le 14/08/2014, à 21:17

Korak

Re : [Résolu] Installation sur Asus N56VJ

Redonne un rapport de Boot Info depuis ton Ubuntu installé, juste pour voir ce qu'il raconte.

Surtout, ne fais pas de réparation, juste le rapport.


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#22 Le 17/08/2014, à 15:09

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Je fais ça dès que possible wink et je vais par la même ouvrir un nouveau topic puisque j'ai le droit à des plantages du serveur X, et ce de manière aléatoire. Enfin bref, je poste ça avant de partir du forum pour quelque temps wink


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#23 Le 18/08/2014, à 13:29

MiniTux90

Re : [Résolu] Installation sur Asus N56VJ

Bonjour bonjour ! Je suis à l'hopital donc je ne peux vous écrire que très rapidemment (merci le wi-fi pour patients ^^), et je vous donne donc les 600 lignes de mon rapport boot-info, bonne chance pour la lecture wink

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 112 for .

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,321,166,847 1,321,164,800   7 NTFS / exFAT / HPFS
/dev/sda2       1,321,168,894 1,465,147,391   143,978,498   5 Extended
/dev/sda5       1,458,915,328 1,465,147,391     6,232,064  82 Linux swap / Solaris
/dev/sda6       1,321,168,896 1,458,915,327   137,746,432  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        ACF8D8F4F8D8BDB0                       ntfs       
/dev/sda5        b8783027-892e-4419-8142-a44530d8bf8c   swap       
/dev/sda6        de18ccb3-b4e6-4421-b760-101e8b329e86   ext4       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /media/michael/ACF8D8F4F8D8BDB0 fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda6        /                        ext4       (rw,errors=remount-ro)


=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
else
  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-de18ccb3-b4e6-4421-b760-101e8b329e86' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
	else
	  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
	fi
	linux	/boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-34-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
	menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-34-generic…'
		linux	/boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-34-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-34-generic…'
		linux	/boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-34-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-32-generic…'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-32-generic…'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-24-generic…'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-de18ccb3-b4e6-4421-b760-101e8b329e86' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
		else
		  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
		fi
		echo	'Chargement de Linux 3.13.0-24-generic…'
		linux	/boot/vmlinuz-3.13.0-24-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-24-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
	else
	  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  de18ccb3-b4e6-4421-b760-101e8b329e86
	else
	  search --no-floppy --fs-uuid --set=root de18ccb3-b4e6-4421-b760-101e8b329e86
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-ACF8D8F4F8D8BDB0' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  ACF8D8F4F8D8BDB0
	else
	  search --no-floppy --fs-uuid --set=root ACF8D8F4F8D8BDB0
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=b8783027-892e-4419-8142-a44530d8bf8c none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-ZDxDTy7q/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-18__14h25 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=de18ccb3-b4e6-4421-b760-101e8b329e86 ro quiet splash

=================== os-prober:
/dev/sda6:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain

=================== blkid:
/dev/sda1: UUID="ACF8D8F4F8D8BDB0" TYPE="ntfs"
/dev/sda5: UUID="b8783027-892e-4419-8142-a44530d8bf8c" TYPE="swap"
/dev/sda6: UUID="de18ccb3-b4e6-4421-b760-101e8b329e86" TYPE="ext4"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 août   9 18:57 grub.d
total 76
-rwxr-xr-x 1 root root  9424 avril 11 12:51 00_header
-rwxr-xr-x 1 root root  6058 avril 10 17:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 12:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 12:51 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12 13:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 12:51 30_os-prober
-rwxr-xr-x 1 root root  1416 avril 11 12:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 11 12:51 40_custom
-rwxr-xr-x 1 root root   216 avril 11 12:51 41_custom
-rw-r--r-- 1 root root   483 avril 11 12:51 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda6	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/media/michael/ACF8D8F4F8D8BDB0.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HTS72757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
1      1049kB  676GB  676GB   primary   ntfs            boot
2      676GB   750GB  73.7GB  extended
6      676GB   747GB  70.5GB  logical   ext4
5      747GB   750GB  3191MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA Hitachi HTS72757;
1:1049kB:676GB:676GB:ntfs::boot;
2:676GB:750GB:73.7GB:::;
6:676GB:747GB:70.5GB:ext4::;
5:747GB:750GB:3191MB:linux-swap(v1)::;


=================== mount:
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=michael)
gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
/dev/sda1 on /media/michael/ACF8D8F4F8D8BDB0 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 5f bf 4e 00 00 00 00  |........._.N....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b0 bd d8 f8 f4 d8 f8 ac  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda6      ext4       65G   12G   50G  20% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs     340M  1.1M  339M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.7G   17M  1.7G   1% /run/shm
none           tmpfs     100M   60K  100M   1% /run/user
/dev/sda1      fuseblk   630G   71G  560G  12% /media/michael/ACF8D8F4F8D8BDB0

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd4341003

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048  1321166847   660582400    7  HPFS/NTFS/exFAT
/dev/sda2      1321168894  1465147391    71989249    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5      1458915328  1465147391     3116032   82  Linux swap / Solaris
/dev/sda6      1321168896  1458915327    68873216   83  Linux

Partition table entries are not in disk order


=================== Final advice in case of recommended repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

A bientôt ! smile


Etudiant en DUT Info, voici mes configs :
Intel Core i7 3770k 3.4ghz, 12gb ddr3, MSI R9 290X 4GB, SSD 120Gb, HDD 2Tb + 1Tb + 500Gb : W10 x64
Intel Core i5 2400 3.1ghz, 10gb ddr3, Sapphire R9 290 4GB, SSD 120Gb + HDD 1Tb : W10 x64
Asus N551JX : i7 4750HQ, 16gb ddr3, gtx 950M, SSD 500GB : W10 x64, Ubuntu Gnome 16.04 x64

Hors ligne

#24 Le 18/08/2014, à 14:11

malbo

Re : [Résolu] Installation sur Asus N56VJ

C'est parfait ton dual-boot. Il n'y a plus de trace de GPT.

EDIT : je viens d'ajouter le modèle N56VJ-S3005H dans la Liste des portables « Asus »
Merci pour l'info

Dernière modification par malbo (Le 18/08/2014, à 14:27)

Hors ligne