Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/08/2014, à 08:11

olivrouen

pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

bonjour,
Voici donc un nouveau fil, merci Slystone pour l'explication (je pensais au contraire qu'il fallait éviter de créer trop de nouvelles discussions sur des problèmes similaires)

J'ai validé il y a deux jours la mise à niveau pour passer à la version 14.04 et depuis, linux plante au démarrage.
A savoir, je suis en dualboot avec windows XP que je n'utilise plus depuis longtemps et linux est choisi par défaut au démarrage, mais maintenant écran noir.

j'ai donc essayé en redémarrant et en allant ds les options ou j'ai le choix entre :
ubuntu avec linux :
3.13.0-35-generic
3.13.0-34-g
3.13.0-33-g
3.2.0-67-g qui est le seul qui me permet de démarrer.

que puis je faire pour changer cela? Est-ce un problème d'utiliser ce noyau? (cela modifie certain de mes logiciels installés)

merci d'avance!

Hors ligne

#2 Le 21/08/2014, à 10:39

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

les noyaux 3.13.0-XX sont des noyaux de Ubuntu 14.04 alors que le noyau 3.2.0-XX est un noyau de l'ancienne installation Ubuntu 12.04. Peut-être que Ubuntu 14.04 a un bug avec ton matériel. Pour le savoir, je te suggère de réaliser un support live de Ubuntu 14.04.1 et de faire un essai en session live (Essayer Ubuntu sans l'installer) pour savoir si ça se passe bien, sans pb d'affichage.
Si ça se passe mal, c'est normal que ton Ubuntu mis à niveau soit défectueux : il y a peut-être un bug de Ubuntu 14.04 dans ton ordi.
Mais si ça se passe bien en session live, ça veut dire que ton Ubuntu mis à jour est plombé par des réglages et autres bidouilles qui marchaient bien avec l'ancienne version mais qui sont néfastes pour la nouvelle. C'est peut-être pas dur à réparer ou c'est peut-être une galère. Le fait que ça se passe bien en session live est quand même un gros encouragement. J'espère que c'est ce que tu vas obtenir.

Dernière modification par malbo (Le 21/08/2014, à 10:45)

Hors ligne

#3 Le 25/08/2014, à 14:13

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

merci bien malbo pour ton aide,

j'ai mis du temps à pourvoir appliquer tes conseils:
-impossible de graver un live cd car mon disque vierge s'éjecte tt seul dès que je lance le gravage
-j'ai mis du temps à comprendre qu'il fallait utiliser l'outil usb-creator (créateur de disque de démarrage sur mon ordi) pour faire une live usb
-l'ordi ne la détectait pas tout seul au démarrage jusqu'à un énième essai ou j'ai fait F12 au démarrage pour choisir USB-ZIP et la j'ai pu démarrer en faisant un essai de la version 14.04

résultat, pas de problème apparent, mais je n'ai rien fait d'exceptionnel : j'ai ouvert libre office, mozilla, des dossiers, rythmnbox...

voilà ou j'en suis!

Hors ligne

#4 Le 25/08/2014, à 15:38

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

démarre sur un ancien noyau, passe cette commande dans un terminal :

cat /etc/X11/xorg.conf

et poste le résultat ici

Hors ligne

#5 Le 25/08/2014, à 15:50

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

par ancien noyau j'ai compris avec le 3.2.0-67-generic qui est le seul qui me permet de démarrer.

voici donc...

olivier@olivier-desktop:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type

Hors ligne

#6 Le 25/08/2014, à 16:34

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Bon ben là je suis sec. J’imaginais que tu avais installé un pilote graphique dans ton install précédente et que c'était la raison pour laquelle ton Ubuntu migré ne voulait fonctionner qu'avec ton ancien noyau mais le résultat que tu as posté montre que tu n'avais pas de pilote propriétaire...

Dernière modification par malbo (Le 25/08/2014, à 16:46)

Hors ligne

#7 Le 25/08/2014, à 17:27

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

hola, faut pas me lâcher comme ça!!!! PLEASE!

J'ai regardé ce que c'était que cette commande que tu m'as fait exécuter.
J'ai eu des problèmes avec les pilotes de ma carte graphique (NVIDIA Corporation G73 [GeForce 7600 GT] (rev a1)). Ayant du mal à lire les videos, un ami m'avait changé le pilote et j'ai eu encore plus de galère après alors j'ai réinstallé un autre pilote il me semble. Cela avait fonctionné (aujourd'hui, je n'arrive plus du tout à lire les DVD en tt cas...)

Donc, au cas ou, voici mes pilotes de carte graphique:
utilisé: NVIDIA legacy binary driver - version 173.14.39 depuis nvidia-173 (propriétaire)
autres: - NVIDIA legacy binary driver - version 304.117 depuis nvidia-304 (propriétaire, testé)
- NVIDIA legacy binary driver - version 304.117 depuis nvidia-304 (propriétaire)
- serveur XX.org - pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau (libre)

Si ce n'est pas ça, y-a-t-il qqchose d'autre à faire/tester?

Hors ligne

#8 Le 25/08/2014, à 17:52

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Je n'y connais rien en carte graphique mais à mon avis, il faut désinstaller tous ces pilotes propriétaires puisque ton essai en session live montre que le pilote libre Nouveau gère bien ta carte graphique. Si personne ne sait t'indiquer ici les commandes qui vont bien pour purger tous ces pilotes, poste dans le forum "Affichage et cartes graphiques" pour demander de l'aide.

Hors ligne

#9 Le 25/08/2014, à 18:00

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

malbo a écrit :

puisque ton essai en session live montre que le pilote libre Nouveau gère bien ta carte graphique

tu veux dire que lorsque j'ai utilisé la live session, c'est le pilote libre qui était utilisé?

ok pour aller voir l'autre forum, mais ne pourrais je pas tenter de refaire une mise à jour de la version 14.04? Pourquoi ubuntu refuse de se lancer avec les noyaux de la version 14.04 et ne peut le faire qu'avec un ancien? Ce pbl là ne sera toujours pas résolu...

Hors ligne

#10 Le 25/08/2014, à 19:40

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

olivrouen a écrit :

ok pour aller voir l'autre forum, mais ne pourrais je pas tenter de refaire une mise à jour de la version 14.04?

Peux-tu expliquer ce que tu veux dire par "tenter de refaire une mise à jour de la version 14.04" (détaille les opérations que ça implique)?

Hors ligne

#11 Le 25/08/2014, à 20:30

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Je n'ai pas vraiment d'idée précise mais je pourrais tenter de désinstaller et réinstaller ubuntu.
Le fait que je sois en dual windowsxp/ubuntu ne peut-il pas aussi poser problème? Ça ne me dérangerai pas de virer XP pour de bon pour garder uniquement ubuntu.

je ne me vois pas fonctionner avec l'ancien pilote pendant longtemps, car hormis certains pgm qui sont "revenus" à des versions anciennes, j'ai beaucoup de bugs (freeze, fermeture de fenêtres, ...)

Hors ligne

#12 Le 26/08/2014, à 04:52

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Pour que je puisse mieux comprendre ton install actuelle, peux-tu démarrer ton ordi en session live (choix Essayer Ubuntu) sur ta liveUSB Ubuntu 14.04 et faire un Boot-Info suivant cette procédure simplifiée : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Tu donneras l'URL du Boot-Info dans ta réponse (ne fais pas la "Réparation recommandée" de Boot-Repair parce que ça ne peut pas réparer le pb graphique que tu as)

Hors ligne

#13 Le 26/08/2014, à 13:58

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

et voila c est fait
http://paste.ubuntu.com/8149699/

dites moi tout docteur...

Hors ligne

#14 Le 26/08/2014, à 17:05

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 112 for .
 => Windows 2000/XP/2003 is installed in the MBR of /dev/sdb.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files:        /boot.ini /ntldr /NTDETECT.COM

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 2823808 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /syslinux/syslinux.cfg /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders, total 320173056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             63    81,920,159    81,920,097   7 NTFS / exFAT / HPFS
/dev/sda2          81,920,160   200,702,879   118,782,720   7 NTFS / exFAT / HPFS
/dev/sda3         200,702,880   260,942,073    60,239,194   7 NTFS / exFAT / HPFS
/dev/sda4         260,943,870   320,172,031    59,228,162   5 Extended
/dev/sda5         260,943,872   317,636,607    56,692,736  83 Linux
/dev/sda6         317,638,656   320,172,031     2,533,376  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                  63   133,114,589   133,114,527   7 NTFS / exFAT / HPFS
/dev/sdb2         133,116,480   234,435,599   101,319,120   7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 2004 MB, 2004877312 bytes
76 heads, 11 sectors/track, 4683 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             32     3,915,775     3,915,744   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        E840057640054CAE                       ntfs       
/dev/sda2        680062270061FC86                       ntfs       Personnel
/dev/sda3        9CD079E5D079C5D4                       ntfs       Data
/dev/sda5        5b747d63-98a8-48a1-b557-8617706abecd   ext4       
/dev/sda6        2147765e-8e21-436e-9b62-e2234b4d42b5   swap       
/dev/sdb1        C4106D62106D5C84                       ntfs       film
/dev/sdb2        EE24427324423F39                       ntfs       films (2)
/dev/sdc1        F327-3275                              vfat       USB DISK

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdc1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


================================ sda1/boot.ini: ================================

--------------------------------------------------------------------------------
[boot loader]
timeout=2
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /fastdetect /NoExecute=OptIn /usepmtimer
--------------------------------------------------------------------------------

=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
else
  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5b747d63-98a8-48a1-b557-8617706abecd' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
	else
	  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
	fi
	linux	/boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-35-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
	menuentry 'Ubuntu, avec Linux 3.13.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-35-generic…'
		linux	/boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-35-generic…'
		linux	/boot/vmlinuz-3.13.0-35-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-35-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-34-generic…'
		linux	/boot/vmlinuz-3.13.0-34-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-34-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-34-generic…'
		linux	/boot/vmlinuz-3.13.0-34-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-34-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-33-generic…'
		linux	/boot/vmlinuz-3.13.0-33-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-33-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.13.0-33-generic…'
		linux	/boot/vmlinuz-3.13.0-33-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-33-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-67-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-67-generic-advanced-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.2.0-67-generic…'
		linux	/boot/vmlinuz-3.2.0-67-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-67-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-67-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-67-generic-recovery-5b747d63-98a8-48a1-b557-8617706abecd' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
		else
		  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
		fi
		echo	'Chargement de Linux 3.2.0-67-generic…'
		linux	/boot/vmlinuz-3.2.0-67-generic root=UUID=5b747d63-98a8-48a1-b557-8617706abecd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-67-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
	else
	  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  5b747d63-98a8-48a1-b557-8617706abecd
	else
	  search --no-floppy --fs-uuid --set=root 5b747d63-98a8-48a1-b557-8617706abecd
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Microsoft Windows XP Professionnel (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-E840057640054CAE' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  E840057640054CAE
	else
	  search --no-floppy --fs-uuid --set=root E840057640054CAE
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=5b747d63-98a8-48a1-b557-8617706abecd /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=2147765e-8e21-436e-9b62-e2234b4d42b5 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


========================= sdc1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

================= sdc1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda4

00000000  58 70 2b 9d 78 28 b7 da  c9 e6 7a 87 d0 a2 be 75  |Xp+.x(....z....u|
00000010  d7 ad 4b d8 c0 56 40 df  0f 34 af 61 a7 34 a7 5d  |..K..V@..4.a.4.]|
00000020  5c 93 7b d0 b3 dd 3a 57  fb bc 8a f4 b4 45 b3 c6  |\.{...:W.....E..|
00000030  0f ab 2e c7 e8 44 33 57  d7 1e af 26 6c 83 3c 6a  |.....D3W...&l.<j|
00000040  f0 be e7 af 5b c7 02 00  ff f6 ff 25 6b af a7 88  |....[......%k...|
00000050  c9 59 3e ce fd 21 ab 41  9b b4 86 97 4e 42 d4 8f  |.Y>..!.A....NB..|
00000060  ee 6d 45 08 06 72 ac 17  d5 95 bb f9 85 f8 b4 d7  |.mE..r..........|
00000070  db 90 48 fd ad 5f e8 ce  aa bb e5 76 b7 f2 ce e0  |..H.._.....v....|
00000080  c0 98 8f df 02 c9 1f f9  87 84 92 e9 3d df f7 d3  |............=...|
00000090  1c 06 6a 83 21 4f 5f e9  95 be 91 79 72 3b e0 52  |..j.!O_....yr;.R|
000000a0  a6 7e 1b 3e e1 9b ef 8d  69 ef 3e 9a 37 e9 a7 1e  |.~.>....i.>.7...|
000000b0  43 ce 1e 1d 91 1c 7a d9  d7 04 04 29 06 b9 ce 15  |C.....z....)....|
000000c0  9b 73 81 17 55 0e 0a fd  55 bb 91 12 57 47 9c 02  |.s..U...U...WG..|
000000d0  9a 58 28 08 1b b7 ca 2a  84 f6 27 22 22 1f ff 3f  |.X(....*..'""..?|
000000e0  22 73 42 c8 e7 a7 a5 8d  c3 59 d0 ae e9 c5 6b b1  |"sB......Y....k.|
000000f0  b3 b1 07 47 2b 9b 20 ed  7f 22 49 20 47 2f 39 11  |...G+. .."I G/9.|
00000100  39 cc 89 75 cc 8e 4a a5  a8 8f 5a f0 dc 4e 93 55  |9..u..J...Z..N.U|
00000110  35 4d 4e 57 ee 3e 1d f5  a5 ac 4e da 03 93 f7 1d  |5MNW.>....N.....|
00000120  12 73 56 ac 11 fb a3 69  da 85 a8 40 61 5c 27 28  |.sV....i...@a\'(|
00000130  5c c1 1b ba a6 08 e2 b2  de 18 61 ad 75 09 5b 68  |\.........a.u.[h|
00000140  2e 76 27 93 1b d8 de ea  fa ac 54 52 f7 b5 a2 71  |.v'.......TR...q|
00000150  1a d7 9f 99 4e bd e4 36  e4 f8 b0 fc 72 cd ca f0  |....N..6....r...|
00000160  52 86 24 2e 84 ab 0f a4  26 e8 d1 e0 86 86 76 cc  |R.$.....&.....v.|
00000170  54 9d 3a 21 99 8d 15 bd  94 43 db b9 e8 d0 65 5a  |T.:!.....C....eZ|
00000180  98 bf 68 b8 8a 8f dd 5f  47 95 3a b3 aa 13 19 aa  |..h...._G.:.....|
00000190  e9 5b c0 a5 e1 f8 4e b4  46 b4 22 8d d3 ec 1f 7b  |.[....N.F."....{|
000001a0  89 38 2c 9e 43 b8 21 15  bd 51 ec 7b 97 cf 7b c3  |.8,.C.!..Q.{..{.|
000001b0  51 f6 f7 c7 6e e7 8a 26  e7 30 33 73 9c 0a 00 fe  |Q...n..&.03s....|
000001c0  ff ff 83 fe ff ff 02 00  00 00 00 10 61 03 00 fe  |............a...|
000001d0  ff ff 05 fe ff ff 3e 12  61 03 c4 ad 26 00 00 00  |......>.a...&...|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
cat: /tmp/BootInfo-gu89rAxc/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-gu89rAxc/Tmp_Log: No such file or directory
File descriptor 9 (/proc/6311/mounts) leaked on lvscan invocation. Parent PID 17291: bash
File descriptor 63 (pipe:[106865]) leaked on lvscan invocation. Parent PID 17291: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-26__12h48 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity

=================== os-prober:
/dev/sda1:Microsoft Windows XP Professionnel:Windows:chain
/dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="E840057640054CAE" TYPE="ntfs"
/dev/sda2: LABEL="Personnel" UUID="680062270061FC86" TYPE="ntfs"
/dev/sda3: LABEL="Data" UUID="9CD079E5D079C5D4" TYPE="ntfs"
/dev/sda5: UUID="5b747d63-98a8-48a1-b557-8617706abecd" TYPE="ext4"
/dev/sda6: UUID="2147765e-8e21-436e-9b62-e2234b4d42b5" TYPE="swap"
/dev/sdb1: LABEL="film" UUID="C4106D62106D5C84" TYPE="ntfs"
/dev/sdb2: LABEL="films (2)" UUID="EE24427324423F39" TYPE="ntfs"
/dev/sdc1: LABEL="USB DISK" UUID="F327-3275" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sda5/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 août  13 15:53 grub.d
total 76
-rwxr-xr-x 1 root root  9424 mai   15 19:01 00_header
-rwxr-xr-x 1 root root  6058 mai    8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai   15 19:01 10_linux
-rwxr-xr-x 1 root root 10412 mai   15 19:01 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai   15 19:01 30_os-prober
-rwxr-xr-x 1 root root  1416 mai   15 19:01 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.   6  2010 40_custom
-rwxr-xr-x 1 root root   216 mai   15 19:01 41_custom
-rw-r--r-- 1 root root   483 oct.   6  2010 README




=================== sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	ntldr,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda3.
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdb2.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	63 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	63 sectors * 512 bytes


=================== parted -l:

Model: ATA Maxtor 6L160P0 (scsi)
Disk /dev/sda: 164GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      32.3kB  41.9GB  41.9GB  primary   ntfs            boot
2      41.9GB  103GB   60.8GB  primary   ntfs
3      103GB   134GB   30.8GB  primary   ntfs
4      134GB   164GB   30.3GB  extended
5      134GB   163GB   29.0GB  logical   ext4
6      163GB   164GB   1297MB  logical   linux-swap(v1)


Model: ATA ST3120026A (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  68.2GB  68.2GB  primary  ntfs
2      68.2GB  120GB   51.9GB  primary  ntfs


Model: USB Flash Disk (scsi)
Disk /dev/sdc: 2005MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  2005MB  2005MB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:164GB:scsi:512:512:msdos:ATA Maxtor 6L160P0;
1:32.3kB:41.9GB:41.9GB:ntfs::boot;
2:41.9GB:103GB:60.8GB:ntfs::;
3:103GB:134GB:30.8GB:ntfs::;
4:134GB:164GB:30.3GB:::;
5:134GB:163GB:29.0GB:ext4::;
6:163GB:164GB:1297MB:linux-swap(v1)::;

BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA ST3120026A;
1:32.3kB:68.2GB:68.2GB:ntfs::;
2:68.2GB:120GB:51.9GB:ntfs::;

BYT;
/dev/sdc:2005MB:scsi:512:512:msdos:USB Flash Disk;
1:16.4kB:2005MB:2005MB:fat32::boot, lba;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sdb sdb1 sdb2 sdc sdc1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 f0 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  60 00 e2 04 00 00 00 00  |........`.......|
00000030  00 00 0c 00 00 00 00 00  06 20 4e 00 00 00 00 00  |......... N.....|
00000040  f6 00 00 00 01 00 00 00  ae 4c 05 40 76 05 40 e8  |.........L.@v.@.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 f0 00 a0 00 e2 04  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7a 14 07 00 00 00 00  |.........z......|
00000030  00 00 0c 00 00 00 00 00  af 47 71 00 00 00 00 00  |.........Gq.....|
00000040  f6 00 00 00 01 00 00 00  86 fc 61 00 27 62 00 68  |..........a.'b.h|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 f0 00 a0 7b f6 0b  |........?....{..|
00000020  00 00 00 00 80 00 80 00  50 2d 97 03 00 00 00 00  |........P-......|
00000030  00 00 0c 00 00 00 00 00  cc ed 71 00 00 00 00 00  |..........q.....|
00000040  f6 00 00 00 01 00 00 00  d4 c5 79 d0 e5 79 d0 9c  |..........y..y..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  9e 2a ef 07 00 00 00 00  |.........*......|
00000030  00 00 0c 00 00 00 00 00  a9 f2 7e 00 00 00 00 00  |..........~.....|
00000040  f6 00 00 00 01 00 00 00  84 5c 6d 10 62 6d 10 c4  |.........m.bm..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 40 32 ef 07  |........?...@2..|
00000020  00 00 00 00 80 00 80 00  cf 01 0a 06 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  1c a0 60 00 00 00 00 00  |..........`.....|
00000040  f6 00 00 00 01 00 00 00  39 3f 42 24 73 42 24 ee  |........9?B$sB$.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs 1008M  120M  888M  12% /
udev           devtmpfs   998M   12K  998M   1% /dev
tmpfs          tmpfs      202M  1.2M  201M   1% /run
/dev/sdc1      vfat       1.9G  987M  922M  52% /cdrom
/dev/loop0     squashfs   952M  952M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs     1008M   60K 1008M   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs     1008M   80K 1008M   1% /run/shm
none           tmpfs      100M   60K  100M   1% /run/user
/dev/sda1      fuseblk     40G   35G  4.6G  89% /mnt/boot-sav/sda1
/dev/sda2      fuseblk     57G   35G   22G  62% /mnt/boot-sav/sda2
/dev/sda3      fuseblk     29G   23G  6.2G  79% /mnt/boot-sav/sda3
/dev/sda5      ext4        27G   14G   12G  55% /mnt/boot-sav/sda5
/dev/sdb1      fuseblk     64G   11G   53G  17% /mnt/boot-sav/sdb1
/dev/sdb2      fuseblk     49G   20G   29G  42% /mnt/boot-sav/sdb2

=================== fdisk -l:

Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders, total 320173056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa6d8a6d8

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63    81920159    40960048+   7  HPFS/NTFS/exFAT
/dev/sda2        81920160   200702879    59391360    7  HPFS/NTFS/exFAT
/dev/sda3       200702880   260942073    30119597    7  HPFS/NTFS/exFAT
/dev/sda4       260943870   320172031    29614081    5  Extended
/dev/sda5       260943872   317636607    28346368   83  Linux
/dev/sda6       317638656   320172031     1266688   82  Linux swap / Solaris

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x46424bc8

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1              63   133114589    66557263+   7  HPFS/NTFS/exFAT
/dev/sdb2       133116480   234435599    50659560    7  HPFS/NTFS/exFAT

Disk /dev/sdc: 2004 MB, 2004877312 bytes
76 heads, 11 sectors/track, 4683 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00047883

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          32     3915775     1957872    c  W95 FAT32 (LBA)


=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (164GB) !

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdb2.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Si tu veux virer XP, ça vaut le coup de faire une installation toute neuve de Ubuntu mais auparavant, il faudra stocker sur disque dur externe les données précieuses que tu peux avoir sur le disque dur. C'est seulement quand ces données seront sauvegardées que tu pourras faire cette install. Tu peux faire une installation automatique de Ubuntu à mon avis (du genre supprimer tout et réinstaller)

Hors ligne

#15 Le 26/08/2014, à 17:59

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

ok, c'est noté, j'avais déjà tout stocké sur un disque externe au vue de ces derniers temps...

et par rapport au boot info? Y a-t-il des infos importantes, des choses à modifier?

Hors ligne

#16 Le 26/08/2014, à 18:46

nam1962

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Combien as tu de RAM ?


[ Modéré ]

Hors ligne

#17 Le 27/08/2014, à 05:16

malbo

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

olivrouen a écrit :

et par rapport au boot info? Y a-t-il des infos importantes, des choses à modifier?

Le boot-Info, c'était pour voir s'il n'y avait pas une anomalie quelconque qui aurait pu t’empêcher de réaménager ton disque dur. Il n'y en a pas et c'est pour ça que je t'ai conseillé de faire une installation automatique de Ubuntu qui pourra écraser tout le partitionnement actuel et le remplacer par un partitionnement créé automatiquement par l'installateur : une partition racine + une partition étendue contenant une partition logique swap. Pour éviter les accidents, le jour où tu fais l'installation, ne laisse pas connecté un disque dur externe parce que l'installateur de Ubuntu pourrait se tromper de disque dur...

Dernière modification par malbo (Le 27/08/2014, à 05:18)

Hors ligne

#18 Le 27/08/2014, à 05:40

F50

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Salut,

Pour commencer, juste après le BIOS, presse une lettre du clavier répétitivement jusqu'à ce que le menu grub apparaisse puis la lettre e, ensuite navigue jusqu'à la ligne :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Ensuite, enlève quiet et splash et reboot pour voir (note le) et nous dire sur quoi ce noyau bloque.

#19 Le 27/08/2014, à 09:50

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Merci à tous de vos réponses / questions

malbo: merci pour les précisions, j'avais vu

boot-repair a écrit :

Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdb2.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot

et je pensais donc qu'il y avait des choses a modifier.

je vais voir comment faire pour envisager une installation automatique de Ubuntu. Le fait que cela pourra

malbo a écrit :

écraser tout le partitionnement actuel et le remplacer par un partitionnement créé automatiquement par l'installateur : une partition racine + une partition étendue contenant une partition logique swap

ça se fera tout seul ou il faut que je gère tout ça?

Nam1962:
pour la ram, j'ai 2,0 Gio (paramètre système/détail/résumé/mémoire, si c'est bien ça!)
donc, il me semblait que ça ne posait pas de pbl pour 14.04

fcn50:
j'ai voulu essayer ta manip, mais n'étant pas certain de comprendre, je voulais te demander des précisions avant de faire n'importe quoi!
-je ne passe pas par le bios il me semble car j'arrive directement sur GRUB version 2.02-beta2-9  exactement comment ici : http://doc.ubuntu-fr.org/grub-pc (avec windows xp en plus)
- j'ai donc fait "e"
-je n'ai pas la ligne que tu as indiqué (GRUB_CMDLINE_LINUX_DEFAULT="quiet splash") mais en 2 dernières lignes:
  -linux   /boot/vmlinuz-3.13.0-35-generic root=UUID=sb747d63-98a8-48a1-b557-8617706abecd ro quiet  splash svt.hand off
  -initrd   /boot/intrd.img-3.13.0-35-generic

ai-je juste à retirer quiet et splash dans l'avant dernière ligne?

fcn50 a écrit :

et reboot pour voir (note le) et nous dire sur quoi ce noyau bloque.

que dois je noter exactement? c'est une fenetre d'erreur qui s'ouvrira?


merci encore à tous.

Hors ligne

#20 Le 27/08/2014, à 10:17

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

et suite à la lecture d'autres discussion dans le forum, je me dis que les infos suivantes peuvent peu être aidées?
- dans GRUB, quand je choisi la 1ère ligne "ubuntu" (qui charge donc sur le noyau 3.13.0-35 generic si je comprends bien), ubuntu charge puis page noire avec 3 lignes:
   - starting lightDM display manager         [OK]
   - stopping send an eent to indicate plymouth is up                 [OK]
puis au bout de 1 minute
   - stopping read required files in advance                     [OK]

puis plus rien alors je relance.

- et aussi, qd je démarre en choisissant le noyau 3.2.0-67 et que j'arrive donc à démarrer linux, le message d'erreur apparaît:
   erreur interne "usr/bin/Xorg"

et une fenetre s'ouvre me demandant si je veux bien créer un "NVIDIA report bug file"

voila voila!

Hors ligne

#21 Le 29/08/2014, à 20:07

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

euh, ai-je dit quelque chose d'interdit?

Hors ligne

#22 Le 29/08/2014, à 20:18

F50

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Ok, alors enlève le quiet et splash de la ligne que tu as puis reprends le boot et note où il bloque, ce seront des messages du noyau sans ouverture d'une autre fenêtre.

#23 Le 29/08/2014, à 20:57

olivrouen

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

bon, je viens d'essayer.
qd je lance mon ordi j'arrive sur grub et la 1ère ligne "ubuntu" (qui lance ubuntu avec les 1ers noyaux je crois 3.13.0-35, 34, 33) qui est sélectionné.
Je ne suis donc pas allé sur ubuntu option, j'ai tappé "e" directement, supprimé quiet et splash et relancé tout de suite en faisant F10.

j'ai bien plein d'info qui apparaissant à mon écran mais ça défile et je n'ai rien le temps de lire et encore moins de noter! peut-on faire un copier coller?

Hors ligne

#24 Le 30/08/2014, à 06:22

F50

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

olivrouen a écrit :

j'ai bien plein d'info qui apparaissant à mon écran mais ça défile et je n'ai rien le temps de lire et encore moins de noter! peut-on faire un copier coller?

C'est normal, si ton ordi bloque, il devrait s'arrêter sur une de ces lignes et ne plus avancer, te laissant ainsi tout le temps de noter en buvant même un café, si ce n'est pas le cas, tu devrais arriver sur le bureau, donc que fait-il exactement ?

En relisant le #20, je vois que ce n'est probablement pas un problème de noyau mais de pilote graphique.

"- et aussi, qd je démarre en choisissant le noyau 3.2.0-67 et que j'arrive donc à démarrer linux, le message d'erreur apparaît:
   erreur interne "usr/bin/Xorg"

et une fenetre s'ouvre me demandant si je veux bien créer un "NVIDIA report bug file" "

Boot sur le noyau 3.2.0-67, une fois sur le bureau donne le retour (entre les balises code <>) des commandes :

lspci -v
cat /var/log/Xorg.0.log

#25 Le 30/08/2014, à 09:42

nam1962

Re : pbl démarrage (noyau3.13.0-...) suite à mise à jour vers 14.04

Avec 2 Go de Ram, en principe il te faut une xubuntu 32 bits : http://cdimage.ubuntu.com/xubuntu/relea … p-i386.iso

Peux tu voir ce que donne cette iso en livesession sur ton ordi ?


[ Modéré ]

Hors ligne