Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 28/08/2014, à 08:43

mycroft34

long démarrage de session avec cubuntu

Bonjour à tous,
Sur deux ordinateurs différents (un fixe au labo: HPz400), et mon portable chez moi (samsung sf310), l'ouverture de session cinnamon est très longue (écran vide pendant au moins une minute); le démarrage de l'ordinateur, est normal (c.a.d. rapide). J'ai pris quelques mesure de nettoyage pour tenter de corriger ce problème: bleachbit pour éliminer les résidus et fichiers temporaires, et démarrage en mode récupération avec vérification des systèmes de fichiers (qui ne comportaient pas d'erreurs, et une fragmentation raisonnable (0.5 % pour le système de fichiers racine, et 2.3% pour /home si je me souviens bien); le démarrage principal jusqu'à l'écran de session s'en est trouvé amélioré, mais l'ouverture de session est toujours aussi longue.
Je tourne avec cubuntu 14.04 LTS.
Est-ce que quelqu'un a une idée sur le pourquoi d'un tel temps de latence à l'ouverture de session; je n'ai pas testé unity; je vais le faire et je compléterai ce message, mais en attendant, je serais preneur de vos remarques.

PS: j'ai naturellement d'abord cherché sur le forum; sans rien trouver sur cette question.

Hors ligne

#2 Le 28/08/2014, à 09:42

inbox

Re : long démarrage de session avec cubuntu

Salut,

Afin de voir comment se déroule le démarrage, donne le retour de la commande suivante :

dmesg

Le texte est à coller en balises "code" (bouton bt_pre.png au dessus de la zone de saisie).

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 28/08/2014, à 13:53

mycroft34

Re : long démarrage de session avec cubuntu

Bonjour Inbox et merci de ton intérêt à mon problème.
Voilà le résultat de la commande dmesg; mais est-ce que je me trompe ou dmesg me renvoie le résultat des commandes lancées au démarrage du système, c.a.d. avant l'écran de session ?

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=d89cca1c-31d6-40b6-b734-b571434a9399 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000957ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000095800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000defa57ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000defa5800-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.20 06/10/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-back
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   1 base 220000000 mask FE0000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[    0.000000]  [mem 0x21fe00000-0x21fffffff] page 2M
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[    0.000000]  [mem 0x21c000000-0x21fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[    0.000000]  [mem 0x200000000-0x21bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdefa4fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdedfffff] page 2M
[    0.000000]  [mem 0xdee00000-0xdefa4fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34900000-0x36477fff]
[    0.000000] ACPI: RSDP 00000000000e9010 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000defb88e8 00006C (v01 HPQOEM SLIC-WKS 20110610      00000000)
[    0.000000] ACPI: FACP 00000000defb8a88 0000F4 (v03 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: DSDT 00000000defb90a3 00A2BD (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000defb8800 000040
[    0.000000] ACPI: APIC 00000000defb8b7c 000108 (v01 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: ASF! 00000000defb8c84 000063 (v32 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: MCFG 00000000defb8ce7 00003C (v01 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: TCPA 00000000defb8d23 000032 (v01 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: SLIC 00000000defb8d55 000176 (v01 HPQOEM SLIC-WKS 00000001      00000000)
[    0.000000] ACPI: HPET 00000000defb8ecb 000038 (v01 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: DMAR 00000000defb8f03 000170 (v01 HPQOEM TYLSBURG 00000001      00000000)
[    0.000000] ACPI: SSDT 00000000defc4a4f 00123C (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
[    0.000000]   NODE_DATA [mem 0x21fff5000-0x21fff9fff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00094fff]
[    0.000000]   node   0: [mem 0x00100000-0xdefa4fff]
[    0.000000]   node   0: [mem 0x100000000-0x21fffffff]
[    0.000000] On node 0 totalpages: 2092857
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3988 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14207 pages used for memmap
[    0.000000]   DMA32 zone: 909221 pages, LIFO batch:31
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xf808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdefa5000-0xdefa5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdefa6000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021fc00000 s86336 r8192 d24256 u131072
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060133
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=d89cca1c-31d6-40b6-b734-b571434a9399 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8127668K/8371428K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 243760K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-15.
[    0.000000] NR_IRQS:16640 nr_irqs:1216 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2666.379 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.75 BogoMIPS (lpj=10665516)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000030] Security Framework initialized
[    0.000050] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000579] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002341] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003123] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003133] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003352] Initializing cgroup subsys memory
[    0.003357] Initializing cgroup subsys devices
[    0.003359] Initializing cgroup subsys freezer
[    0.003360] Initializing cgroup subsys blkio
[    0.003362] Initializing cgroup subsys perf_event
[    0.003364] Initializing cgroup subsys hugetlb
[    0.003382] CPU: Physical Processor ID: 0
[    0.003383] CPU: Processor Core ID: 0
[    0.003387] mce: CPU supports 9 MCE banks
[    0.003396] CPU0: Thermal monitoring enabled (TM1)
[    0.003404] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.003404] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003404] tlb_flushall_shift: 6
[    0.003497] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[    0.004552] ACPI: Core revision 20131115
[    0.007263] ACPI: All ACPI Tables successfully acquired
[    0.009537] ftrace: allocating 28537 entries in 112 pages
[    0.021747] dmar: Host address width 39
[    0.021748] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[    0.021754] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
[    0.021756] dmar: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
[    0.021757] dmar: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
[    0.021758] dmar: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
[    0.021759] dmar: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
[    0.021760] dmar: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
[    0.021761] dmar: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
[    0.021762] dmar: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
[    0.021763] dmar: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
[    0.021764] dmar: ATSR flags: 0x0
[    0.021872] This system BIOS has enabled interrupt remapping
[    0.021872] on a chipset that contains an erratum making that
[    0.021872] feature unstable.  To maintain system stability
[    0.021872] interrupt remapping is being disabled.  Please
[    0.021872] contact your BIOS vendor for an update
[    0.021943] Switched APIC routing to physical flat.
[    0.022493] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062172] smpboot: CPU0: Intel(R) Xeon(R) CPU           W3520  @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
[    0.166304] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.166308] perf_event_intel: CPU erratum AAJ80 worked around
[    0.166309] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.166311] ... version:                3
[    0.166312] ... bit width:              48
[    0.166313] ... generic registers:      4
[    0.166314] ... value mask:             0000ffffffffffff
[    0.166315] ... max period:             000000007fffffff
[    0.166315] ... fixed-purpose events:   3
[    0.166316] ... event mask:             000000070000000f
[    0.167944] x86: Booting SMP configuration:
[    0.181238] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.167945] .... node  #0, CPUs:        #1  #2  #3
[    0.207695] x86: Booted up 1 node, 4 CPUs
[    0.207698] smpboot: Total of 4 processors activated (21331.03 BogoMIPS)
[    0.210563] devtmpfs: initialized
[    0.213765] EVM: security.selinux
[    0.213766] EVM: security.SMACK64
[    0.213767] EVM: security.ima
[    0.213768] EVM: security.capability
[    0.214608] pinctrl core: initialized pinctrl subsystem
[    0.214663] regulator-dummy: no parameters
[    0.214690] RTC time: 10:07:43, date: 08/28/14
[    0.214721] NET: Registered protocol family 16
[    0.214810] cpuidle: using governor ladder
[    0.214811] cpuidle: using governor menu
[    0.214838] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.214840] ACPI: bus type PCI registered
[    0.214841] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.214892] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.214895] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.217385] PCI: Using configuration type 1 for base access
[    0.218169] bio: create slab <bio-0> at 0
[    0.218333] ACPI: Added _OSI(Module Device)
[    0.218335] ACPI: Added _OSI(Processor Device)
[    0.218336] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218337] ACPI: Added _OSI(Processor Aggregator Device)
[    0.222979] ACPI: Interpreter enabled
[    0.222984] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.222988] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.222998] ACPI: (supports S0 S3 S4 S5)
[    0.223000] ACPI: Using IOAPIC for interrupt routing
[    0.223021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223093] ACPI: No dock devices found.
[    0.230376] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.230384] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.230433] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    0.230437] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8802140e8fa0), AE_ALREADY_EXISTS (20131115/psparse-536)
[    0.230442] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.230446] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.230643] acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x03af]; [io  0x0000-0x03af] ignored
[    0.230769] PCI host bridge to bus 0000:00
[    0.230772] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.230773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.230775] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.230777] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
[    0.230778] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.230780] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.230781] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.230783] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.230784] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff]
[    0.230786] pci_bus 0000:00: root bus resource [io  0x1000-0xefff]
[    0.230797] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[    0.230847] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.230908] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    0.230959] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.230996] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.231027] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.231078] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.231114] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.231144] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    0.231195] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.231231] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.231259] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[    0.231345] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[    0.231423] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
[    0.231506] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
[    0.231586] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.231674] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.231759] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.231847] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
[    0.231928] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.231967] pci 0000:00:1a.0: reg 0x20: [io  0xd000-0xd01f]
[    0.232032] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.232057] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.232096] pci 0000:00:1a.1: reg 0x20: [io  0xd020-0xd03f]
[    0.232159] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.232187] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.232226] pci 0000:00:1a.2: reg 0x20: [io  0xd040-0xd05f]
[    0.232289] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.232322] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.232342] pci 0000:00:1a.7: reg 0x10: [mem 0xed004800-0xed004bff]
[    0.232425] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.232462] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.232491] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.232505] pci 0000:00:1b.0: reg 0x10: [mem 0xed000000-0xed003fff 64bit]
[    0.232567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.232624] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.232686] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.232723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.232752] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.232815] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.232852] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.232881] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.232919] pci 0000:00:1d.0: reg 0x20: [io  0xd060-0xd07f]
[    0.232983] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.233008] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.233047] pci 0000:00:1d.1: reg 0x20: [io  0xd080-0xd09f]
[    0.233110] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.233135] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.233174] pci 0000:00:1d.2: reg 0x20: [io  0xd0a0-0xd0bf]
[    0.233237] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.233271] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.233290] pci 0000:00:1d.7: reg 0x10: [mem 0xed004c00-0xed004fff]
[    0.233373] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.233410] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.233435] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.233507] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.233536] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.233608] pci 0000:00:1f.0: no compatible bridge window for [io  0xf800-0xf87f]
[    0.233612] pci 0000:00:1f.0: no compatible bridge window for [io  0xfa00-0xfa3f]
[    0.233615] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[    0.233618] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[    0.233621] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[    0.233702] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.233719] pci 0000:00:1f.2: reg 0x10: [io  0xd100-0xd107]
[    0.233726] pci 0000:00:1f.2: reg 0x14: [io  0xd110-0xd113]
[    0.233733] pci 0000:00:1f.2: reg 0x18: [io  0xd108-0xd10f]
[    0.233740] pci 0000:00:1f.2: reg 0x1c: [io  0xd114-0xd117]
[    0.233747] pci 0000:00:1f.2: reg 0x20: [io  0xd0c0-0xd0df]
[    0.233754] pci 0000:00:1f.2: reg 0x24: [mem 0xed004000-0xed0047ff]
[    0.233796] pci 0000:00:1f.2: PME# supported from D3hot
[    0.233909] pci 0000:03:00.0: [1106:3432] type 00 class 0x0c0330
[    0.233920] pci 0000:03:00.0: reg 0x10: [mem 0xee000000-0xee000fff]
[    0.233986] pci 0000:03:00.0: supports D1 D2
[    0.233987] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238469] pci 0000:00:01.0: PCI bridge to [bus 03]
[    0.238476] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xee0fffff]
[    0.238563] pci 0000:0f:00.0: [10de:0df8] type 00 class 0x030000
[    0.238573] pci 0000:0f:00.0: reg 0x10: [mem 0xea000000-0xeaffffff]
[    0.238583] pci 0000:0f:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.238592] pci 0000:0f:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
[    0.238599] pci 0000:0f:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.238606] pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.238680] pci 0000:0f:00.1: [10de:0bea] type 00 class 0x040300
[    0.238689] pci 0000:0f:00.1: reg 0x10: [mem 0xeb000000-0xeb003fff]
[    0.246474] pci 0000:00:03.0: PCI bridge to [bus 0f]
[    0.246479] pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
[    0.246483] pci 0000:00:03.0:   bridge window [mem 0xea000000-0xeb0fffff]
[    0.246489] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.246562] pci 0000:00:07.0: PCI bridge to [bus 28]
[    0.246625] pci 0000:00:1c.0: PCI bridge to [bus 1c]
[    0.246708] pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000
[    0.246730] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xec00ffff 64bit]
[    0.246858] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.254478] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.254486] pci 0000:00:1c.5:   bridge window [mem 0xec000000-0xec0fffff]
[    0.254578] pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010
[    0.254594] pci 0000:37:05.0: reg 0x10: [mem 0xef000000-0xef000fff]
[    0.254662] pci 0000:37:05.0: supports D1 D2
[    0.254664] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot
[    0.254721] pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode)
[    0.254726] pci 0000:00:1e.0:   bridge window [mem 0xef000000-0xef0fffff]
[    0.254731] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.254733] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
[    0.254734] pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
[    0.254736] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.254737] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.254739] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.254740] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.254742] pci 0000:00:1e.0:   bridge window [io  0x0d00-0x0fff] (subtractive decode)
[    0.254743] pci 0000:00:1e.0:   bridge window [io  0x1000-0xefff] (subtractive decode)
[    0.254917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.254964] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
[    0.255010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.255055] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
[    0.255100] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.255145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[    0.255190] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15)
[    0.255236] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.255336] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f])
[    0.255340] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.255343] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.255380] PCI host bridge to bus 0000:3f
[    0.255382] pci_bus 0000:3f: root bus resource [bus 3f]
[    0.255386] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
[    0.255418] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
[    0.255451] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
[    0.255479] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
[    0.255509] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
[    0.255539] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
[    0.255567] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
[    0.255596] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
[    0.255623] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
[    0.255652] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
[    0.255680] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
[    0.255710] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
[    0.255738] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
[    0.255766] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
[    0.255794] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
[    0.255823] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
[    0.255851] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
[    0.255880] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
[    0.255911] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
[    0.256146] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.256151] ACPI: \_SB_.PCI0: notify handler is installed
[    0.256171] ACPI: \_SB_.NHL1: notify handler is installed
[    0.256177] Found 2 acpi root devices
[    0.256334] vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.256338] vgaarb: loaded
[    0.256339] vgaarb: bridge control possible 0000:0f:00.0
[    0.256466] SCSI subsystem initialized
[    0.256502] libata version 3.00 loaded.
[    0.256516] ACPI: bus type USB registered
[    0.256527] usbcore: registered new interface driver usbfs
[    0.256534] usbcore: registered new interface driver hub
[    0.256548] usbcore: registered new device driver usb
[    0.256625] PCI: Using ACPI for IRQ routing
[    0.257903] PCI: pci_cache_line_size set to 64 bytes
[    0.257975] e820: reserve RAM buffer [mem 0x00095800-0x0009ffff]
[    0.257977] e820: reserve RAM buffer [mem 0xdefa5800-0xdfffffff]
[    0.258043] NetLabel: Initializing
[    0.258045] NetLabel:  domain hash size = 128
[    0.258045] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.258056] NetLabel:  unlabeled traffic allowed by default
[    0.258094] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.258099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.258102] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.260219] Switched to clocksource hpet
[    0.264017] AppArmor: AppArmor Filesystem Enabled
[    0.264038] pnp: PnP ACPI init
[    0.264048] ACPI: bus type PNP registered
[    0.264093] pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.264103] pnp 00:01: [dma 4]
[    0.264115] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.264136] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.264155] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.264175] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.264197] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.264369] pnp 00:06: [dma 2]
[    0.264392] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.264439] pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.264476] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.264630] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264648] pnp 00:0a: disabling [io  0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.264650] pnp 00:0a: disabling [io  0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.264652] pnp 00:0a: disabling [io  0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.264654] pnp 00:0a: disabling [io  0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.264677] system 00:0a: [io  0x0400-0x041f] has been reserved
[    0.264679] system 00:0a: [io  0x0420-0x043f] has been reserved
[    0.264681] system 00:0a: [io  0x0440-0x045f] has been reserved
[    0.264682] system 00:0a: [io  0x0460-0x047f] has been reserved
[    0.264684] system 00:0a: [io  0x0480-0x048f] has been reserved
[    0.264686] system 00:0a: [io  0xfa00-0xfa3f] has been reserved
[    0.264687] system 00:0a: [io  0xfc00-0xfc7f] has been reserved
[    0.264689] system 00:0a: [io  0xfc80-0xfcff] has been reserved
[    0.264691] system 00:0a: [io  0xfe00-0xfe7f] has been reserved
[    0.264692] system 00:0a: [io  0xfe80-0xfeff] has been reserved
[    0.264694] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264737] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.264739] system 00:0b: [io  0x4700-0x470b] has been reserved
[    0.264741] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304294] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.304299] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.304302] system 00:0c: [mem 0x000e8000-0x000fffff] could not be reserved
[    0.304306] system 00:0c: [mem 0xfec01000-0xfecfffff] could not be reserved
[    0.304309] system 00:0c: [mem 0xfed00000-0xfed3ffff] could not be reserved
[    0.304312] system 00:0c: [mem 0xfed40000-0xffffffff] could not be reserved
[    0.304317] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.304319] system 00:0c: [mem 0x000d9a00-0x000e7fff] has been reserved
[    0.304321] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.304330] pnp: PnP ACPI: found 13 devices
[    0.304331] ACPI: bus type PNP unregistered
[    0.310270] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 1c] add_size 1000
[    0.310273] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000
[    0.310275] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000
[    0.310282] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.310284] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.310301] pci 0000:00:1f.0: BAR 13: [io  0xf800-0xf87f] has bogus alignment
[    0.310303] pci 0000:00:1f.0: BAR 14: [io  0xfa00-0xfa3f] has bogus alignment
[    0.310305] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.310307] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.310308] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.310310] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.310312] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.310315] pci 0000:00:1c.0: BAR 14: assigned [mem 0xeb100000-0xeb2fffff]
[    0.310317] pci 0000:00:1c.0: BAR 15: assigned [mem 0xeb300000-0xeb4fffff 64bit pref]
[    0.310319] pci 0000:00:1c.5: BAR 15: assigned [mem 0xeb500000-0xeb6fffff 64bit pref]
[    0.310322] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.310324] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.310327] pci 0000:00:01.0: PCI bridge to [bus 03]
[    0.310330] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xee0fffff]
[    0.310337] pci 0000:0f:00.0: BAR 6: assigned [mem 0xeb080000-0xeb0fffff pref]
[    0.310339] pci 0000:00:03.0: PCI bridge to [bus 0f]
[    0.310341] pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
[    0.310344] pci 0000:00:03.0:   bridge window [mem 0xea000000-0xeb0fffff]
[    0.310347] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.310351] pci 0000:00:07.0: PCI bridge to [bus 28]
[    0.310359] pci 0000:00:1c.0: PCI bridge to [bus 1c]
[    0.310361] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.310365] pci 0000:00:1c.0:   bridge window [mem 0xeb100000-0xeb2fffff]
[    0.310368] pci 0000:00:1c.0:   bridge window [mem 0xeb300000-0xeb4fffff 64bit pref]
[    0.310373] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.310375] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.310379] pci 0000:00:1c.5:   bridge window [mem 0xec000000-0xec0fffff]
[    0.310382] pci 0000:00:1c.5:   bridge window [mem 0xeb500000-0xeb6fffff 64bit pref]
[    0.310387] pci 0000:00:1e.0: PCI bridge to [bus 37]
[    0.310391] pci 0000:00:1e.0:   bridge window [mem 0xef000000-0xef0fffff]
[    0.310397] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[    0.310399] pci_bus 0000:00: resource 5 [mem 0xe0000000-0xefffffff]
[    0.310400] pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff]
[    0.310402] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff]
[    0.310403] pci_bus 0000:00: resource 8 [io  0x0000-0x03af]
[    0.310405] pci_bus 0000:00: resource 9 [io  0x03b0-0x03df]
[    0.310406] pci_bus 0000:00: resource 10 [io  0x03e0-0x0cf7]
[    0.310408] pci_bus 0000:00: resource 11 [io  0x0d00-0x0fff]
[    0.310409] pci_bus 0000:00: resource 12 [io  0x1000-0xefff]
[    0.310411] pci_bus 0000:03: resource 1 [mem 0xee000000-0xee0fffff]
[    0.310412] pci_bus 0000:0f: resource 0 [io  0xe000-0xefff]
[    0.310414] pci_bus 0000:0f: resource 1 [mem 0xea000000-0xeb0fffff]
[    0.310415] pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.310417] pci_bus 0000:1c: resource 0 [io  0x1000-0x1fff]
[    0.310418] pci_bus 0000:1c: resource 1 [mem 0xeb100000-0xeb2fffff]
[    0.310420] pci_bus 0000:1c: resource 2 [mem 0xeb300000-0xeb4fffff 64bit pref]
[    0.310421] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.310423] pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
[    0.310424] pci_bus 0000:01: resource 2 [mem 0xeb500000-0xeb6fffff 64bit pref]
[    0.310426] pci_bus 0000:37: resource 1 [mem 0xef000000-0xef0fffff]
[    0.310428] pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
[    0.310429] pci_bus 0000:37: resource 5 [mem 0xe0000000-0xefffffff]
[    0.310431] pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff]
[    0.310432] pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff]
[    0.310433] pci_bus 0000:37: resource 8 [io  0x0000-0x03af]
[    0.310435] pci_bus 0000:37: resource 9 [io  0x03b0-0x03df]
[    0.310436] pci_bus 0000:37: resource 10 [io  0x03e0-0x0cf7]
[    0.310438] pci_bus 0000:37: resource 11 [io  0x0d00-0x0fff]
[    0.310439] pci_bus 0000:37: resource 12 [io  0x1000-0xefff]
[    0.310465] NET: Registered protocol family 2
[    0.310604] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.310761] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.310953] TCP: Hash tables configured (established 65536 bind 65536)
[    0.310974] TCP: reno registered
[    0.310984] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.311017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.311100] NET: Registered protocol family 1
[    0.312389] pci 0000:0f:00.0: Boot video device
[    0.312421] PCI: CLS 64 bytes, default 64
[    0.312463] Trying to unpack rootfs image as initramfs...
[    0.729484] Freeing initrd memory: 28128K (ffff880034900000 - ffff880036478000)
[    0.729521] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.729524] software IO TLB [mem 0xdafa5000-0xdefa5000] (64MB) mapped at [ffff8800dafa5000-ffff8800defa4fff]
[    0.729690] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[    0.729695] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[    0.729700] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[    0.729705] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[    0.729749] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.729750] Scanning for low memory corruption every 60 seconds
[    0.730032] Initialise system trusted keyring
[    0.730076] audit: initializing netlink socket (disabled)
[    0.730086] type=2000 audit(1409220463.624:1): initialized
[    0.753092] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.754005] zbud: loaded
[    0.754129] VFS: Disk quotas dquot_6.5.2
[    0.754166] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.754531] fuse init (API version 7.22)
[    0.754589] msgmni has been set to 15929
[    0.754636] Key type big_key registered
[    0.754942] Key type asymmetric registered
[    0.754943] Asymmetric key parser 'x509' registered
[    0.754974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.755002] io scheduler noop registered
[    0.755003] io scheduler deadline registered (default)
[    0.755026] io scheduler cfq registered
[    0.755222] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[    0.755382] pcieport 0000:00:1c.5: irq 65 for MSI/MSI-X
[    0.755442] ioapic: probe of 0000:00:15.0 failed with error -22
[    0.755448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.755457] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.755493] intel_idle: MWAIT substates: 0x1120
[    0.755499] intel_idle: v0.4 model 0x1A
[    0.755500] intel_idle: lapic_timer_reliable_states 0x2
[    0.755580] ipmi message handler version 39.2
[    0.755634] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.755638] ACPI: Power Button [PBTN]
[    0.755663] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.755665] ACPI: Power Button [PWRF]
[    0.755813] GHES: HEST is not enabled!
[    0.755878] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.757271] Linux agpgart interface v0.103
[    0.758391] brd: module loaded
[    0.758974] loop: module loaded
[    0.759238] libphy: Fixed MDIO Bus: probed
[    0.759301] tun: Universal TUN/TAP device driver, 1.6
[    0.759302] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.759330] PPP generic driver version 2.4.2
[    0.759362] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.759366] ehci-pci: EHCI PCI platform driver
[    0.759474] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.759479] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.759491] ehci-pci 0000:00:1a.7: debug port 1
[    0.763399] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.763413] ehci-pci 0000:00:1a.7: irq 22, io mem 0xed004800
[    0.772336] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.772372] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.772374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.772375] usb usb1: Product: EHCI Host Controller
[    0.772377] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.772378] usb usb1: SerialNumber: 0000:00:1a.7
[    0.772494] hub 1-0:1.0: USB hub found
[    0.772500] hub 1-0:1.0: 6 ports detected
[    0.772682] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.772686] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.772697] ehci-pci 0000:00:1d.7: debug port 1
[    0.776582] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.776598] ehci-pci 0000:00:1d.7: irq 20, io mem 0xed004c00
[    0.788357] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.788413] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.788417] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788419] usb usb2: Product: EHCI Host Controller
[    0.788422] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.788425] usb usb2: SerialNumber: 0000:00:1d.7
[    0.788576] hub 2-0:1.0: USB hub found
[    0.788581] hub 2-0:1.0: 6 ports detected
[    0.788675] ehci-platform: EHCI generic platform driver
[    0.788684] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.788685] ohci-pci: OHCI PCI platform driver
[    0.788692] ohci-platform: OHCI generic platform driver
[    0.788696] uhci_hcd: USB Universal Host Controller Interface driver
[    0.788783] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.788787] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.788807] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000d000
[    0.788839] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.788841] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788842] usb usb3: Product: UHCI Host Controller
[    0.788844] usb usb3: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.788845] usb usb3: SerialNumber: 0000:00:1a.0
[    0.789093] hub 3-0:1.0: USB hub found
[    0.789104] hub 3-0:1.0: 2 ports detected
[    0.789270] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.789274] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.789304] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d020
[    0.789336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.789337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.789339] usb usb4: Product: UHCI Host Controller
[    0.789340] usb usb4: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.789342] usb usb4: SerialNumber: 0000:00:1a.1
[    0.789591] hub 4-0:1.0: USB hub found
[    0.789601] hub 4-0:1.0: 2 ports detected
[    0.789765] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.789769] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.789790] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000d040
[    0.789821] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.789822] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.789824] usb usb5: Product: UHCI Host Controller
[    0.789825] usb usb5: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.789827] usb usb5: SerialNumber: 0000:00:1a.2
[    0.790070] hub 5-0:1.0: USB hub found
[    0.790086] hub 5-0:1.0: 2 ports detected
[    0.790249] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.790253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.790274] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d060
[    0.790306] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.790308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.790309] usb usb6: Product: UHCI Host Controller
[    0.790310] usb usb6: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.790312] usb usb6: SerialNumber: 0000:00:1d.0
[    0.790559] hub 6-0:1.0: USB hub found
[    0.790568] hub 6-0:1.0: 2 ports detected
[    0.790735] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.790739] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.790759] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000d080
[    0.790790] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.790792] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.790794] usb usb7: Product: UHCI Host Controller
[    0.790795] usb usb7: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.790796] usb usb7: SerialNumber: 0000:00:1d.1
[    0.791009] hub 7-0:1.0: USB hub found
[    0.791018] hub 7-0:1.0: 2 ports detected
[    0.791184] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.791188] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.791209] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000d0a0
[    0.791240] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.791241] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.791243] usb usb8: Product: UHCI Host Controller
[    0.791244] usb usb8: Manufacturer: Linux 3.13.0-35-generic uhci_hcd
[    0.791246] usb usb8: SerialNumber: 0000:00:1d.2
[    0.791489] hub 8-0:1.0: USB hub found
[    0.791499] hub 8-0:1.0: 2 ports detected
[    0.791640] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.791644] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[    0.791907] xhci_hcd 0000:03:00.0: irq 66 for MSI/MSI-X
[    0.791951] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    0.791953] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.791955] usb usb9: Product: xHCI Host Controller
[    0.791956] usb usb9: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.791957] usb usb9: SerialNumber: 0000:03:00.0
[    0.792180] hub 9-0:1.0: USB hub found
[    0.792190] hub 9-0:1.0: 1 port detected
[    0.792313] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.792316] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
[    0.792386] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[    0.792388] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.792390] usb usb10: Product: xHCI Host Controller
[    0.792391] usb usb10: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.792392] usb usb10: SerialNumber: 0000:03:00.0
[    0.792519] hub 10-0:1.0: USB hub found
[    0.792534] hub 10-0:1.0: 4 ports detected
[    0.800514] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    0.803844] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.803849] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.804163] mousedev: PS/2 mouse device common for all mice
[    0.804667] rtc_cmos 00:02: RTC can wake from S4
[    0.804906] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.804936] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.805021] device-mapper: uevent: version 1.0.3
[    0.805279] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.805293] ledtrig-cpu: registered to indicate activity on CPUs
[    0.805429] TCP: cubic registered
[    0.805499] NET: Registered protocol family 10
[    0.805640] NET: Registered protocol family 17
[    0.805646] Key type dns_resolver registered
[    0.806311] Loading compiled-in X.509 certificates
[    0.807187] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    0.807195] registered taskstats version 1
[    0.810368] Key type trusted registered
[    0.813031] Key type encrypted registered
[    0.815522] AppArmor: AppArmor sha1 policy hashing enabled
[    0.815527] IMA: No TPM chip found, activating TPM-bypass!
[    0.815889] regulator-dummy: disabling
[    0.816155]   Magic number: 10:241:124
[    0.816358] rtc_cmos 00:02: setting system clock to 2014-08-28 10:07:44 UTC (1409220464)
[    0.817312] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.817313] EDD information not available.
[    0.817331] PM: Hibernation image not present or could not be loaded.
[    0.818680] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    0.818681] Write protecting the kernel read-only data: 12288k
[    0.820960] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[    0.822602] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    0.837525] systemd-udevd[140]: starting version 204
[    0.854303] pps_core: LinuxPPS API ver. 1 registered
[    0.854306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.855768] PTP clock support registered
[    0.858469] tg3.c:v3.134 (Sep 16, 2013)
[    0.859479] ahci 0000:00:1f.2: version 3.0
[    0.859596] ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
[    0.859608] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[    0.859663] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[    0.859665] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs 
[    0.860338] scsi0 : ahci
[    0.861528] scsi1 : ahci
[    0.861791] scsi2 : ahci
[    0.861882] scsi3 : ahci
[    0.861982] scsi4 : ahci
[    0.862023] scsi5 : ahci
[    0.862052] ata1: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004100 irq 67
[    0.862055] ata2: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004180 irq 67
[    0.862056] ata3: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004200 irq 67
[    0.862058] ata4: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004280 irq 67
[    0.862060] ata5: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004300 irq 67
[    0.862062] ata6: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004380 irq 67
[    0.866459] FDC 0 is a post-1991 82077
[    0.896841] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 3c:d9:2b:6a:67:51
[    0.896845] tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    0.896847] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.896849] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.916404] firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    1.180435] ata6: SATA link down (SStatus 0 SControl 300)
[    1.180485] ata5: SATA link down (SStatus 0 SControl 300)
[    1.180506] ata4: SATA link down (SStatus 0 SControl 300)
[    1.340382] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    1.352373] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.352418] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.352435] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.353515] ata1.00: ATA-8: Hitachi HDS721050CLA662, JP2OA41A, max UDMA/133
[    1.353520] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.353561] ata2.00: ATA-8: Hitachi HDS721050CLA662, JP2OA41A, max UDMA/133
[    1.353565] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.354654] ata3.00: ATAPI: hp       CDDVDW TS-H653T, H6D1, max UDMA/100
[    1.354742] ata1.00: configured for UDMA/133
[    1.354858] ata2.00: configured for UDMA/133
[    1.354993] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[    1.355203] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.355248] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.355419] sd 0:0:0:0: [sda] Write Protect is off
[    1.355422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.355490] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[    1.355567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.355650] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.355703] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.355795] sd 1:0:0:0: [sdb] Write Protect is off
[    1.355797] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.355853] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.357047] ata3.00: configured for UDMA/100
[    1.357993] scsi 2:0:0:0: CD-ROM            hp       CDDVDW TS-H653T  H6D1 PQ: 0 ANSI: 5
[    1.361481] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.361485] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.361750] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.361882] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.362288]  sda: sda1 sda2 sda3
[    1.363460] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.401279]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[    1.402778] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.420505] firewire_core 0000:37:05.0: created device fw0: GUID 0060b000007d981c, S400
[    1.517360] usb 6-2: New USB device found, idVendor=03f0, idProduct=0024
[    1.517365] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.517368] usb 6-2: Product: HP Basic USB Keyboard
[    1.517371] usb 6-2: Manufacturer: CHICONY
[    1.523462] hidraw: raw HID events driver (C) Jiri Kosina
[    1.539539] usbcore: registered new interface driver usbhid
[    1.539542] usbhid: USB HID core driver
[    1.541076] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
[    1.541246] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-2/input0
[    1.728306] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[    1.764352] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[    1.943875] usb 7-2: New USB device found, idVendor=09da, idProduct=032b
[    1.943881] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.943884] usb 7-2: Product: Wireless Battery Free Optical Mouse
[    1.943887] usb 7-2: Manufacturer: A4Tech
[    1.973138] input: A4Tech Wireless Battery Free Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input6
[    1.973601] hid-generic 0003:09DA:032B.0002: input,hidraw1: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:1d.1-2/input0
[    2.340435] usb 9-1: new high-speed USB device number 2 using xhci_hcd
[    2.357639] usb 9-1: New USB device found, idVendor=2109, idProduct=0811
[    2.357644] usb 9-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.357647] usb 9-1: Product: USB2.0 Hub
[    2.358489] hub 9-1:1.0: USB hub found
[    2.358645] hub 9-1:1.0: 4 ports detected
[    2.728727] Switched to clocksource tsc
[    3.106115] random: nonblocking pool is initialized
[    3.392282] raid6: sse2x1    6913 MB/s
[    3.460280] raid6: sse2x2    8107 MB/s
[    3.528276] raid6: sse2x4    9057 MB/s
[    3.528277] raid6: using algorithm sse2x4 (9057 MB/s)
[    3.528278] raid6: using ssse3x2 recovery algorithm
[    3.529816] xor: measuring software checksum speed
[    3.568289]    prefetch64-sse: 12004.000 MB/sec
[    3.608290]    generic_sse: 10609.000 MB/sec
[    3.608291] xor: using function: prefetch64-sse (12004.000 MB/sec)
[    3.619484] bio: create slab <bio-1> at 1
[    3.619695] Btrfs loaded
[    4.162560] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   13.854679] Adding 7998460k swap on /dev/sdb5.  Priority:-1 extents:1 across:7998460k FS
[   13.907438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.975905] systemd-udevd[429]: starting version 204
[   14.133921] lp: driver loaded but no devices found
[   14.152863] wmi: Mapper loaded
[   14.156590] EDAC MC: Ver: 3.0.0
[   14.158982] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[   14.159009] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[   14.159014] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   14.184538] [drm] Initialized drm 1.1.0 20060810
[   14.193236] ppdev: user-space parallel port driver
[   14.193762] nvidia: module license 'NVIDIA' taints kernel.
[   14.193765] Disabling lock debugging due to kernel taint
[   14.202176] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   14.208550] vgaarb: device changed decodes: PCI:0000:0f:00.0,olddecodes=io+mem,decodes=none:owns=none
[   14.208848] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:0f:00.0 on minor 0
[   14.208856] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
[   14.245108] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   14.256696] WARNING! power/level is deprecated; use power/control instead
[   14.258575] device-mapper: multipath: version 1.6.0 loaded
[   14.278065] type=1400 audit(1409213277.958:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=528 comm="apparmor_parser"
[   14.278072] type=1400 audit(1409213277.958:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=528 comm="apparmor_parser"
[   14.278076] type=1400 audit(1409213277.958:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=528 comm="apparmor_parser"
[   14.278464] type=1400 audit(1409213277.958:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=528 comm="apparmor_parser"
[   14.278469] type=1400 audit(1409213277.958:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=528 comm="apparmor_parser"
[   14.278670] type=1400 audit(1409213277.958:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=528 comm="apparmor_parser"
[   14.279432] snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
[   14.280637] type=1400 audit(1409213277.962:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=621 comm="apparmor_parser"
[   14.292621] hda_codec: ALC262: SKU not ready 0x411111f0
[   14.292906] autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[   14.292908]    speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   14.292909]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.292910]    mono: mono_out=0x0
[   14.292910]    inputs:
[   14.292912]      Front Mic=0x19
[   14.292913]      Rear Mic=0x18
[   14.292914]      Line=0x1a
[   14.292915] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[   14.292916] realtek: Enable default setup for auto mode as fallback
[   14.302261] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.302963] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.303007] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.303047] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.303085] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   14.303284] hda_intel: Disabling MSI
[   14.303292] hda-intel 0000:0f:00.1: Handle VGA-switcheroo audio client
[   14.303323] hda-intel 0000:0f:00.1: Disabling 64bit DMA
[   14.307188] hda-intel 0000:0f:00.1: Enable delay in RIRB handling
[   14.362555] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   14.456677] input: HP WMI hotkeys as /devices/virtual/input/input12
[   15.104404] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input16
[   15.104513] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input15
[   15.104574] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input14
[   15.104640] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input13
[   16.129633] init: udev-fallback-graphics main process (828) terminated with status 1
[   16.264621] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   17.168324] EXT4-fs (sdb6): mounting ext3 file system using the ext4 subsystem
[   17.276435] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[   17.490662] EXT4-fs (sdb7): mounting ext3 file system using the ext4 subsystem
[   17.528761] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[   17.608114] init: failsafe main process (920) killed by TERM signal
[   17.842115] Bluetooth: Core ver 2.17
[   17.842127] NET: Registered protocol family 31
[   17.842128] Bluetooth: HCI device and connection manager initialized
[   17.842135] Bluetooth: HCI socket layer initialized
[   17.842136] Bluetooth: L2CAP socket layer initialized
[   17.842139] Bluetooth: SCO socket layer initialized
[   17.844579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.844581] Bluetooth: BNEP filters: protocol multicast
[   17.844586] Bluetooth: BNEP socket layer initialized
[   17.845566] Bluetooth: RFCOMM TTY layer initialized
[   17.845571] Bluetooth: RFCOMM socket layer initialized
[   17.845574] Bluetooth: RFCOMM ver 1.11
[   17.883584] type=1400 audit(1409213281.562:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1053 comm="apparmor_parser"
[   17.883590] type=1400 audit(1409213281.562:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1053 comm="apparmor_parser"
[   17.883977] type=1400 audit(1409213281.562:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1053 comm="apparmor_parser"
[   17.970295] init: cups main process (1054) killed by HUP signal
[   17.970304] init: cups main process ended, respawning
[   18.680328] init: gdm main process (1212) killed by TERM signal
[   18.996209] tg3 0000:01:00.0: irq 69 for MSI/MSI-X
[   19.057058] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.057306] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.289786] vboxdrv: Found 4 processor cores.
[   19.290583] vboxdrv: fAsync=0 offMin=0x45c offMax=0x1db95
[   19.290888] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   19.290890] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007).
[   19.498844] vboxpci: IOMMU not found (not registered)
[   19.796872] init: samba-ad-dc main process (1305) terminated with status 1
[   20.072185] nvidia 0000:0f:00.0: irq 70 for MSI/MSI-X
[   21.128008] init: plymouth-upstart-bridge main process ended, respawning
[   21.131264] init: plymouth-upstart-bridge main process (1465) terminated with status 1
[   21.131273] init: plymouth-upstart-bridge main process ended, respawning
[   21.381530] init: plymouth-stop pre-start process (1512) terminated with status 1
[   22.236321] tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   22.236327] tg3 0000:01:00.0 eth0: Flow control is off for TX and off for RX
[   22.236343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   47.970723] audit_printk_skb: 165 callbacks suppressed
[   47.970726] type=1400 audit(1409213311.650:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2542 comm="apparmor_parser"
[   47.970732] type=1400 audit(1409213311.650:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2542 comm="apparmor_parser"
[   47.971108] type=1400 audit(1409213311.650:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2542 comm="apparmor_parser"
[   58.785428] systemd-hostnamed[2745]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   63.169202] traps: nemo[2631] general protection ip:7f2edc5653a8 sp:7fffa0623488 error:0 in libglib-2.0.so.0.4000.0[7f2edc520000+106000]
[ 1224.139795] perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

J'ai essayé une session unity avec presque le même résultat (excepté que la barre latéral d'unity s'affiche, alors que le menu de cinnamon ne s'affiche qu'après le lag. J'ai aussi essayé gnome (même résultat que unity) et gnome classique (2D) qui lui s'initialise plus rapidement; ce qui m'incline à penser que c'est un problème de serveur graphique; comme je suis équipé d'une carte NVidia, il faudrait que j'essaie le serveur nv. Sais-tu comment tracer le démarrage du serveur graphique ?

Hors ligne

#4 Le 28/08/2014, à 14:24

inbox

Re : long démarrage de session avec cubuntu

La log du système graphique est dans /var/log/Xorg.0.log. Le pilote "nv" n'offre pas l'accélération graphique 3D. Certains environnements graphique ne pourront se charger (Unity par exemple).

Peux-tu donner aussi le résultat de :

lspci

Je note aussi, que ton noyau à la version 3.13.0-35. Ceci montre que tu utilises les dépôts "proposed"., ce qui n'est pas conseillé (pré-version de paquets pouvant être problématiques). Il faut désactiver ce dépôt dans les sources de mises à jour. Est-ce que tu rencontre le même problème si tu démarres avec le noyau 3.13.0-34 ?


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#5 Le 28/08/2014, à 16:02

mycroft34

Re : long démarrage de session avec cubuntu

Bien; j'ai désactivé les dépôts "proposed" et réinstallé le noyau 3.13.0-34 avec synaptics (il avait été "nettoyé" par ubuntu tweak). J'espère avoir réinstallé ce noyau correctement; en tous cas, j'ai pu démarrer avec, et le résultat avec cinnamon est le même lag.
Ci-dessous, le lspci:

patrick@patrick-HP-Z400-Workstation:~$ lspci
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13)
00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13)
00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 13)
00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 13)
00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 13)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode]
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 03)
0f:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
0f:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
37:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70)
3f:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
3f:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05)
3f:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05)
3f:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05)
3f:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05)
3f:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05)
3f:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05)
3f:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05)
3f:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05)
3f:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05)
3f:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05)
3f:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05)
3f:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05)
3f:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05)
3f:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05)
3f:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05)
3f:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05)
3f:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05)
3f:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05)

et voici le log du serveur Xorg:

[    20.397] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    20.397] X Protocol Version 11, Revision 0
[    20.397] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[    20.397] Current Operating System: Linux patrick-HP-Z400-Workstation 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64
[    20.398] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=d89cca1c-31d6-40b6-b734-b571434a9399 ro quiet splash
[    20.398] Build Date: 30 July 2014  12:21:54AM
[    20.398] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[    20.398] Current version of pixman: 0.30.2
[    20.398] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.398] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.398] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 28 16:38:38 2014
[    20.426] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.436] (==) No Layout section.  Using the first Screen section.
[    20.436] (==) No screen section available. Using defaults.
[    20.436] (**) |-->Screen "Default Screen Section" (0)
[    20.436] (**) |   |-->Monitor "<default monitor>"
[    20.436] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.436] (==) Automatically adding devices
[    20.436] (==) Automatically enabling devices
[    20.436] (==) Automatically adding GPU devices
[    20.436] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.436] 	Entry deleted from font path.
[    20.436] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.436] 	Entry deleted from font path.
[    20.436] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.436] 	Entry deleted from font path.
[    20.436] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.436] 	Entry deleted from font path.
[    20.436] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.436] 	Entry deleted from font path.
[    20.436] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.436] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.436] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.436] (II) Loader magic: 0x7f570b55fd40
[    20.436] (II) Module ABI versions:
[    20.436] 	X.Org ANSI C Emulation: 0.4
[    20.436] 	X.Org Video Driver: 15.0
[    20.436] 	X.Org XInput driver : 20.0
[    20.436] 	X.Org Server Extension : 8.0
[    20.436] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.438] (--) PCI:*(0:15:0:0) 10de:0df8:103c:0835 rev 161, Mem @ 0xea000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    20.438] Initializing built-in extension Generic Event Extension
[    20.438] Initializing built-in extension SHAPE
[    20.438] Initializing built-in extension MIT-SHM
[    20.438] Initializing built-in extension XInputExtension
[    20.438] Initializing built-in extension XTEST
[    20.438] Initializing built-in extension BIG-REQUESTS
[    20.438] Initializing built-in extension SYNC
[    20.438] Initializing built-in extension XKEYBOARD
[    20.438] Initializing built-in extension XC-MISC
[    20.438] Initializing built-in extension SECURITY
[    20.438] Initializing built-in extension XINERAMA
[    20.438] Initializing built-in extension XFIXES
[    20.438] Initializing built-in extension RENDER
[    20.438] Initializing built-in extension RANDR
[    20.438] Initializing built-in extension COMPOSITE
[    20.438] Initializing built-in extension DAMAGE
[    20.438] Initializing built-in extension MIT-SCREEN-SAVER
[    20.438] Initializing built-in extension DOUBLE-BUFFER
[    20.438] Initializing built-in extension RECORD
[    20.438] Initializing built-in extension DPMS
[    20.438] Initializing built-in extension Present
[    20.438] Initializing built-in extension DRI3
[    20.438] Initializing built-in extension X-Resource
[    20.438] Initializing built-in extension XVideo
[    20.438] Initializing built-in extension XVideo-MotionCompensation
[    20.438] Initializing built-in extension SELinux
[    20.438] Initializing built-in extension XFree86-VidModeExtension
[    20.438] Initializing built-in extension XFree86-DGA
[    20.438] Initializing built-in extension XFree86-DRI
[    20.438] Initializing built-in extension DRI2
[    20.438] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    20.438] (II) "glx" will be loaded by default.
[    20.438] (WW) "xmir" is not to be loaded by default. Skipping.
[    20.438] (II) LoadModule: "glx"
[    20.438] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    20.888] (II) Module glx: vendor="NVIDIA Corporation"
[    20.888] 	compiled for 4.0.2, module version = 1.0.0
[    20.888] 	Module class: X.Org Server Extension
[    20.888] (II) NVIDIA GLX Module  331.38  Wed Jan  8 19:10:17 PST 2014
[    20.888] Loading extension GLX
[    20.888] (==) Matched nvidia as autoconfigured driver 0
[    20.888] (==) Matched nouveau as autoconfigured driver 1
[    20.888] (==) Matched nvidia as autoconfigured driver 2
[    20.888] (==) Matched nouveau as autoconfigured driver 3
[    20.888] (==) Matched modesetting as autoconfigured driver 4
[    20.888] (==) Matched fbdev as autoconfigured driver 5
[    20.888] (==) Matched vesa as autoconfigured driver 6
[    20.888] (==) Assigned the driver to the xf86ConfigLayout
[    20.888] (II) LoadModule: "nvidia"
[    20.888] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    20.889] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.889] 	compiled for 4.0.2, module version = 1.0.0
[    20.889] 	Module class: X.Org Video Driver
[    20.889] (II) LoadModule: "nouveau"
[    20.921] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.935] (II) Module nouveau: vendor="X.Org Foundation"
[    20.935] 	compiled for 1.15.0, module version = 1.0.10
[    20.935] 	Module class: X.Org Video Driver
[    20.935] 	ABI class: X.Org Video Driver, version 15.0
[    20.935] (II) LoadModule: "modesetting"
[    20.935] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.935] (II) Module modesetting: vendor="X.Org Foundation"
[    20.935] 	compiled for 1.15.0, module version = 0.8.1
[    20.935] 	Module class: X.Org Video Driver
[    20.935] 	ABI class: X.Org Video Driver, version 15.0
[    20.935] (II) LoadModule: "fbdev"
[    20.935] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.936] (II) Module fbdev: vendor="X.Org Foundation"
[    20.936] 	compiled for 1.15.0, module version = 0.4.4
[    20.936] 	Module class: X.Org Video Driver
[    20.936] 	ABI class: X.Org Video Driver, version 15.0
[    20.936] (II) LoadModule: "vesa"
[    20.936] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.936] (II) Module vesa: vendor="X.Org Foundation"
[    20.936] 	compiled for 1.15.0, module version = 2.3.3
[    20.936] 	Module class: X.Org Video Driver
[    20.936] 	ABI class: X.Org Video Driver, version 15.0
[    20.936] (II) NVIDIA dlloader X Driver  331.38  Wed Jan  8 18:51:00 PST 2014
[    20.936] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.936] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    20.936] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.936] 	RIVA TNT        (NV04)
[    20.936] 	RIVA TNT2       (NV05)
[    20.936] 	GeForce 256     (NV10)
[    20.936] 	GeForce 2       (NV11, NV15)
[    20.936] 	GeForce 4MX     (NV17, NV18)
[    20.936] 	GeForce 3       (NV20)
[    20.936] 	GeForce 4Ti     (NV25, NV28)
[    20.936] 	GeForce FX      (NV3x)
[    20.936] 	GeForce 6       (NV4x)
[    20.936] 	GeForce 7       (G7x)
[    20.936] 	GeForce 8       (G8x)
[    20.936] 	GeForce GTX 200 (NVA0)
[    20.936] 	GeForce GTX 400 (NVC0)
[    20.936] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.936] (II) FBDEV: driver for framebuffer: fbdev
[    20.936] (II) VESA: driver for VESA chipsets: vesa
[    20.936] (++) using VT number 7

[    20.938] (II) Loading sub module "fb"
[    20.938] (II) LoadModule: "fb"
[    20.956] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.956] (II) Module fb: vendor="X.Org Foundation"
[    20.956] 	compiled for 1.15.1, module version = 1.0.0
[    20.956] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.956] (WW) Unresolved symbol: fbGetGCPrivateKey
[    20.956] (II) Loading sub module "wfb"
[    20.956] (II) LoadModule: "wfb"
[    20.956] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    20.956] (II) Module wfb: vendor="X.Org Foundation"
[    20.956] 	compiled for 1.15.1, module version = 1.0.0
[    20.956] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.956] (II) Loading sub module "ramdac"
[    20.956] (II) LoadModule: "ramdac"
[    20.956] (II) Module "ramdac" already built-in
[    20.956] (WW) Falling back to old probe method for modesetting
[    20.956] (WW) Falling back to old probe method for fbdev
[    20.956] (II) Loading sub module "fbdevhw"
[    20.956] (II) LoadModule: "fbdevhw"
[    20.957] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.957] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.957] 	compiled for 1.15.1, module version = 0.0.2
[    20.957] 	ABI class: X.Org Video Driver, version 15.0
[    20.957] (EE) open /dev/fb0: No such file or directory
[    20.957] (WW) Falling back to old probe method for vesa
[    20.957] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.957] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    20.957] (==) NVIDIA(0): RGB weight 888
[    20.957] (==) NVIDIA(0): Default visual is TrueColor
[    20.957] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.957] (**) NVIDIA(0): Enabling 2D acceleration
[    21.698] (II) NVIDIA(0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    21.698] (II) NVIDIA(0):     stereo.
[    21.728] (II) NVIDIA(0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    21.728] (II) NVIDIA(0):     stereo.
[    21.728] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    21.729] (II) NVIDIA(0): NVIDIA GPU Quadro 600 (GF108GL) at PCI:15:0:0 (GPU-0)
[    21.729] (--) NVIDIA(0): Memory: 1048576 kBytes
[    21.729] (--) NVIDIA(0): VideoBIOS: 70.08.37.00.02
[    21.729] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    21.733] (--) NVIDIA(0): Valid display device(s) on Quadro 600 at PCI:15:0:0
[    21.733] (--) NVIDIA(0):     CRT-0
[    21.733] (--) NVIDIA(0):     HP LA2405x (DFP-0) (boot, connected)
[    21.733] (--) NVIDIA(0):     HP LA2205 (DFP-1) (connected)
[    21.733] (--) NVIDIA(0):     DFP-2
[    21.733] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    21.733] (--) NVIDIA(0): HP LA2405x (DFP-0): Internal Dual Link TMDS
[    21.733] (--) NVIDIA(0): HP LA2405x (DFP-0): 330.0 MHz maximum pixel clock
[    21.733] (--) NVIDIA(0): HP LA2205 (DFP-1): Internal Single Link TMDS
[    21.733] (--) NVIDIA(0): HP LA2205 (DFP-1): 165.0 MHz maximum pixel clock
[    21.733] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[    21.733] (--) NVIDIA(0): DFP-2: 480.0 MHz maximum pixel clock
[    21.733] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    21.733] (**) NVIDIA(0):     device HP LA2405x (DFP-0) (Using EDID frequencies has been
[    21.733] (**) NVIDIA(0):     enabled on all display devices.)
[    21.734] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    21.734] (**) NVIDIA(0):     device HP LA2205 (DFP-1) (Using EDID frequencies has been
[    21.734] (**) NVIDIA(0):     enabled on all display devices.)
[    21.735] (==) NVIDIA(0): 
[    21.735] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    21.735] (==) NVIDIA(0):     will be used as the requested mode.
[    21.735] (==) NVIDIA(0): 
[    21.735] (II) NVIDIA(0): Validated MetaModes:
[    21.735] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[    21.735] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1200
[    21.767] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[    21.768] (--) NVIDIA(0):     option
[    21.768] (WW) NVIDIA(0): UBB is incompatible with the Composite extension.  Disabling
[    21.768] (WW) NVIDIA(0):     UBB.
[    21.768] (II) UnloadModule: "nouveau"
[    21.768] (II) Unloading nouveau
[    21.768] (II) UnloadModule: "modesetting"
[    21.768] (II) Unloading modesetting
[    21.768] (II) UnloadModule: "fbdev"
[    21.768] (II) Unloading fbdev
[    21.768] (II) UnloadSubModule: "fbdevhw"
[    21.768] (II) Unloading fbdevhw
[    21.768] (II) UnloadModule: "vesa"
[    21.768] (II) Unloading vesa
[    21.768] (--) Depth 24 pixmap format is 32 bpp
[    21.768] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    21.768] (II) NVIDIA:     access.
[    21.775] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[    21.865] Loading extension NV-GLX
[    21.963] (==) NVIDIA(0): Disabling shared memory pixmaps
[    21.963] (==) NVIDIA(0): Backing store enabled
[    21.963] (==) NVIDIA(0): Silken mouse enabled
[    21.963] (==) NVIDIA(0): DPMS enabled
[    21.963] Loading extension NV-CONTROL
[    21.963] Loading extension XINERAMA
[    21.963] (II) Loading sub module "dri2"
[    21.963] (II) LoadModule: "dri2"
[    21.964] (II) Module "dri2" already built-in
[    21.964] (II) NVIDIA(0): [DRI2] Setup complete
[    21.964] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    21.964] (--) RandR disabled
[    21.968] (II) SELinux: Disabled on system
[    21.968] (II) Initializing extension GLX
[    21.981] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    21.983] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.983] (II) LoadModule: "evdev"
[    21.984] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.994] (II) Module evdev: vendor="X.Org Foundation"
[    21.994] 	compiled for 1.15.0, module version = 2.8.2
[    21.994] 	Module class: X.Org XInput Driver
[    21.994] 	ABI class: X.Org XInput driver, version 20.0
[    21.994] (II) Using input driver 'evdev' for 'Power Button'
[    21.994] (**) Power Button: always reports core events
[    21.994] (**) evdev: Power Button: Device: "/dev/input/event1"
[    21.994] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.994] (--) evdev: Power Button: Found keys
[    21.994] (II) evdev: Power Button: Configuring as keyboard
[    21.994] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    21.994] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.994] (**) Option "xkb_rules" "evdev"
[    21.994] (**) Option "xkb_model" "a4techKB21"
[    21.994] (**) Option "xkb_layout" "us,af"
[    21.994] (**) Option "xkb_variant" ","
[    21.994] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.996] (II) XKB: reuse xkmfile /var/lib/xkb/server-D65F0CEBBFF6EBF8C260C3F97D666DF0EB9FF6D8.xkm
[    21.996] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.996] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.996] (II) Using input driver 'evdev' for 'Power Button'
[    21.996] (**) Power Button: always reports core events
[    21.996] (**) evdev: Power Button: Device: "/dev/input/event0"
[    21.996] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.996] (--) evdev: Power Button: Found keys
[    21.996] (II) evdev: Power Button: Configuring as keyboard
[    21.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    21.996] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    21.996] (**) Option "xkb_rules" "evdev"
[    21.996] (**) Option "xkb_model" "a4techKB21"
[    21.996] (**) Option "xkb_layout" "us,af"
[    21.996] (**) Option "xkb_variant" ","
[    21.996] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.997] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:03.0/0000:0f:00.0/drm/card0
[    21.997] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    21.997] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[    21.997] (II) No input driver specified, ignoring this device.
[    21.997] (II) This device may have been added with another device file.
[    21.997] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[    21.997] (II) No input driver specified, ignoring this device.
[    21.997] (II) This device may have been added with another device file.
[    21.997] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[    21.997] (II) No input driver specified, ignoring this device.
[    21.997] (II) This device may have been added with another device file.
[    21.997] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    21.997] (II) No input driver specified, ignoring this device.
[    21.997] (II) This device may have been added with another device file.
[    21.998] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[    21.998] (II) No input driver specified, ignoring this device.
[    21.998] (II) This device may have been added with another device file.
[    21.998] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[    21.998] (II) No input driver specified, ignoring this device.
[    21.998] (II) This device may have been added with another device file.
[    21.998] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
[    21.998] (II) No input driver specified, ignoring this device.
[    21.998] (II) This device may have been added with another device file.
[    21.998] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event9)
[    21.998] (II) No input driver specified, ignoring this device.
[    21.998] (II) This device may have been added with another device file.
[    21.998] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    21.998] (II) No input driver specified, ignoring this device.
[    21.999] (II) This device may have been added with another device file.
[    21.999] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event2)
[    21.999] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    21.999] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[    21.999] (**) CHICONY HP Basic USB Keyboard: always reports core events
[    21.999] (**) evdev: CHICONY HP Basic USB Keyboard: Device: "/dev/input/event2"
[    21.999] (--) evdev: CHICONY HP Basic USB Keyboard: Vendor 0x3f0 Product 0x24
[    21.999] (--) evdev: CHICONY HP Basic USB Keyboard: Found keys
[    21.999] (II) evdev: CHICONY HP Basic USB Keyboard: Configuring as keyboard
[    21.999] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5/event2"
[    21.999] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 8)
[    21.999] (**) Option "xkb_rules" "evdev"
[    21.999] (**) Option "xkb_model" "a4techKB21"
[    21.999] (**) Option "xkb_layout" "us,af"
[    21.999] (**) Option "xkb_variant" ","
[    21.999] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.999] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/event3)
[    21.999] (**) A4Tech Wireless Battery Free Optical Mouse: Applying InputClass "evdev pointer catchall"
[    21.999] (II) Using input driver 'evdev' for 'A4Tech Wireless Battery Free Optical Mouse'
[    21.999] (**) A4Tech Wireless Battery Free Optical Mouse: always reports core events
[    21.999] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: Device: "/dev/input/event3"
[    21.999] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Vendor 0x9da Product 0x32b
[    21.999] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found 12 mouse buttons
[    21.999] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found scroll wheel(s)
[    21.999] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found relative axes
[    21.999] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found x and y relative axes
[    21.999] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: Configuring as mouse
[    21.999] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: Adding scrollwheel support
[    21.999] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: YAxisMapping: buttons 4 and 5
[    21.999] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.999] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input6/event3"
[    22.000] (II) XINPUT: Adding extended input device "A4Tech Wireless Battery Free Optical Mouse" (type: MOUSE, id 9)
[    22.000] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: initialized for relative axes.
[    22.000] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) keeping acceleration scheme 1
[    22.000] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration profile 0
[    22.000] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration factor: 2.000
[    22.000] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration threshold: 4
[    22.000] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/mouse0)
[    22.000] (II) No input driver specified, ignoring this device.
[    22.000] (II) This device may have been added with another device file.
[    22.002] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
[    22.002] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    22.002] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    22.002] (**) HP WMI hotkeys: always reports core events
[    22.002] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event4"
[    22.002] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    22.002] (--) evdev: HP WMI hotkeys: Found keys
[    22.002] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    22.002] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event4"
[    22.002] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
[    22.002] (**) Option "xkb_rules" "evdev"
[    22.002] (**) Option "xkb_model" "a4techKB21"
[    22.002] (**) Option "xkb_layout" "us,af"
[    22.002] (**) Option "xkb_variant" ","
[    22.002] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    24.759] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    24.759] (II) NVIDIA(GPU-0):     stereo.
[    24.789] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    24.789] (II) NVIDIA(GPU-0):     stereo.
[    25.158] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    25.158] (II) NVIDIA(GPU-0):     stereo.
[    25.188] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    25.188] (II) NVIDIA(GPU-0):     stereo.
[    25.804] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    25.804] (II) NVIDIA(GPU-0):     stereo.
[    25.835] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    25.835] (II) NVIDIA(GPU-0):     stereo.
[    41.317] (II) XKB: reuse xkmfile /var/lib/xkb/server-953EFD617B01270F882A9F1DCB656755C4BB8F92.xkm
[    44.704] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    44.705] (II) NVIDIA(GPU-0):     stereo.
[    44.735] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    44.735] (II) NVIDIA(GPU-0):     stereo.
[    44.877] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1200 +1680+0 {ViewPortIn=1920x1200, ViewPortOut=1920x1200+0+0}, DP-0: nvidia-auto-select @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[    44.923] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1200 +1680+0 {ViewPortIn=1920x1200, ViewPortOut=1920x1200+0+0}, DP-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[    45.796] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    45.796] (II) NVIDIA(GPU-0):     stereo.
[    45.827] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    45.827] (II) NVIDIA(GPU-0):     stereo.
[    47.197] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    47.197] (II) NVIDIA(GPU-0):     stereo.
[    47.227] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    47.227] (II) NVIDIA(GPU-0):     stereo.
[    48.120] (II) XKB: reuse xkmfile /var/lib/xkb/server-953EFD617B01270F882A9F1DCB656755C4BB8F92.xkm
[    68.753] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    68.753] (II) NVIDIA(GPU-0):     stereo.
[    68.783] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    68.783] (II) NVIDIA(GPU-0):     stereo.
[    71.365] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    71.365] (II) NVIDIA(GPU-0):     stereo.
[    71.396] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    71.396] (II) NVIDIA(GPU-0):     stereo.
[    71.459] (II) NVIDIA(GPU-0): Display (HP LA2405x (DFP-0)) does not support NVIDIA 3D Vision
[    71.459] (II) NVIDIA(GPU-0):     stereo.
[    71.490] (II) NVIDIA(GPU-0): Display (HP LA2205 (DFP-1)) does not support NVIDIA 3D Vision
[    71.490] (II) NVIDIA(GPU-0):     stereo.

Les deux écrans reconnus correspondent bien à ma situation.
Mais, il y a plusieurs warnings (WW), et plusieurs devices ignorés; peuvent-ils ralentir l'initialisation de la session ? Ce fichier d'initialisation me semble d'ailleurs nettement plus long que ce que j'avais pu consulter antérieurement (avec un autre ordinateur, il est vrai).
Encore merci Inbox de l'attention que tu portes à mon problème.

Hors ligne

#6 Le 29/08/2014, à 09:51

inbox

Re : long démarrage de session avec cubuntu

Comme tu as supprimé le noyau du dépôt "proposed", passe la commande suivante pour être certain d'avoir les futures mises à jour de noyau :

sudo apt-get install linux-generic linux-headers-generic linux-image-generic

Les WW et devices ignorés n'ont pas d'impact sur le temps de démarrage.

En comparant avec un autre Xorg.0.log, je ne remarque rien d'anormal.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne