Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 30/08/2014, à 11:25

Altaille

Problème graphique hybride Intel/AMD drivers libres

Bonjour !

Je viens chercher l'aide de linuxiens plus expérimentés que moi afin de résoudre un problème de drivers pour ma carte commutable yikes: . Je suis récemment passé à linux (dual boot avec W7), d'abord sous elementary os luna, puis sous Xubuntu après avoir détruit mon boot en installant de mauvais drivers et en essayant de les désinstaller n'importe comment. Maintenant j'ai une installation propre, avec les drivers libres (mesa) vu que les drivers AMD (fglrx) me faisait perdre en autonomie sur e0S avec la carte intégrée seule. Le problème c'est qu'avec les drivers libres, ma carte graphique dédiée ne démarre jamais. La commande vga_switcheroo semble bloquée, j'ai essayé de bidouiller un peu à l'aide du site de Xorg, catégorie "KMS Power Management Options" pour passer en mode "profile" mais sans succés, l'arborescence de fichier ne semble pas correspondre. Voici ci dessous le contenu de Xorg.0.log (comme demandé dans la section conseil, même si je ne crois pas que ce soit utile dans mon cas)

Xorg.0.log :

[    22.581] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    22.581] X Protocol Version 11, Revision 0
[    22.581] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[    22.581] Current Operating System: Linux kikonux 3.13.0-35-generic #62-Ubuntu SMP Fri Aug 15 01:58:01 UTC 2014 i686
[    22.581] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=88c8bf29-8432-4771-addc-de9078bfd5df ro quiet splash vt.handoff=7
[    22.581] Build Date: 16 April 2014  01:40:08PM
[    22.581] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[    22.581] Current version of pixman: 0.30.2
[    22.581] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    22.581] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.581] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 30 10:56:52 2014
[    22.628] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.628] (==) No Layout section.  Using the first Screen section.
[    22.629] (==) No screen section available. Using defaults.
[    22.629] (**) |-->Screen "Default Screen Section" (0)
[    22.629] (**) |   |-->Monitor "<default monitor>"
[    22.629] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    22.629] (**) |   |-->Device "card0"
[    22.629] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    22.629] (==) Automatically adding devices
[    22.629] (==) Automatically enabling devices
[    22.629] (==) Automatically adding GPU devices
[    22.629] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.629] 	Entry deleted from font path.
[    22.629] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    22.629] 	Entry deleted from font path.
[    22.629] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    22.629] 	Entry deleted from font path.
[    22.629] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    22.629] 	Entry deleted from font path.
[    22.629] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    22.629] 	Entry deleted from font path.
[    22.629] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    22.629] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    22.629] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.629] (II) Loader magic: 0xb77996c0
[    22.629] (II) Module ABI versions:
[    22.629] 	X.Org ANSI C Emulation: 0.4
[    22.629] 	X.Org Video Driver: 15.0
[    22.629] 	X.Org XInput driver : 20.0
[    22.629] 	X.Org Server Extension : 8.0
[    22.629] (II) xfree86: Adding drm device (/dev/dri/card1)
[    22.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.630] (--) PCI:*(0:0:2:0) 8086:0166:1028:056a rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[    22.630] (--) PCI: (0:1:0:0) 1002:6840:1028:056a rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    22.630] Initializing built-in extension Generic Event Extension
[    22.630] Initializing built-in extension SHAPE
[    22.630] Initializing built-in extension MIT-SHM
[    22.630] Initializing built-in extension XInputExtension
[    22.630] Initializing built-in extension XTEST
[    22.630] Initializing built-in extension BIG-REQUESTS
[    22.630] Initializing built-in extension SYNC
[    22.630] Initializing built-in extension XKEYBOARD
[    22.630] Initializing built-in extension XC-MISC
[    22.630] Initializing built-in extension SECURITY
[    22.630] Initializing built-in extension XINERAMA
[    22.630] Initializing built-in extension XFIXES
[    22.630] Initializing built-in extension RENDER
[    22.630] Initializing built-in extension RANDR
[    22.630] Initializing built-in extension COMPOSITE
[    22.630] Initializing built-in extension DAMAGE
[    22.630] Initializing built-in extension MIT-SCREEN-SAVER
[    22.630] Initializing built-in extension DOUBLE-BUFFER
[    22.630] Initializing built-in extension RECORD
[    22.630] Initializing built-in extension DPMS
[    22.630] Initializing built-in extension Present
[    22.630] Initializing built-in extension DRI3
[    22.630] Initializing built-in extension X-Resource
[    22.630] Initializing built-in extension XVideo
[    22.630] Initializing built-in extension XVideo-MotionCompensation
[    22.630] Initializing built-in extension SELinux
[    22.630] Initializing built-in extension XFree86-VidModeExtension
[    22.630] Initializing built-in extension XFree86-DGA
[    22.630] Initializing built-in extension XFree86-DRI
[    22.630] Initializing built-in extension DRI2
[    22.630] (II) LoadModule: "glx"
[    22.810] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.183] (II) Module glx: vendor="X.Org Foundation"
[    23.183] 	compiled for 1.15.1, module version = 1.0.0
[    23.183] 	ABI class: X.Org Server Extension, version 8.0
[    23.183] (==) AIGLX enabled
[    23.183] Loading extension GLX
[    23.183] (II) LoadModule: "intel"
[    23.183] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.221] (II) Module intel: vendor="X.Org Foundation"
[    23.221] 	compiled for 1.15.0, module version = 2.99.910
[    23.221] 	Module class: X.Org Video Driver
[    23.221] 	ABI class: X.Org Video Driver, version 15.0
[    23.221] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    23.221] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[    23.221] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[    23.221] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[    23.221] (++) using VT number 7

[    23.222] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>)
[    23.222] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    23.222] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    23.222] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    23.222] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.222] (==) intel(0): RGB weight 888
[    23.222] (==) intel(0): Default visual is TrueColor
[    23.222] (**) intel(0): Option "Backlight" "intel_backlight"
[    23.222] (**) intel(0): Framebuffer tiled
[    23.222] (**) intel(0): Pixmaps tiled
[    23.222] (**) intel(0): "Tear free" disabled
[    23.222] (**) intel(0): Forcing per-crtc-pixmaps? no
[    23.222] (II) intel(0): Output LVDS1 has no monitor section
[    23.222] (**) intel(0): found backlight control interface intel_backlight (type 'user')
[    23.222] (II) intel(0): Output VGA1 has no monitor section
[    23.222] (II) intel(0): Output HDMI1 has no monitor section
[    23.222] (II) intel(0): Output DP1 has no monitor section
[    23.222] (II) intel(0): Output VIRTUAL1 has no monitor section
[    23.222] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    23.222] (==) intel(0): DPI set to (96, 96)
[    23.222] (II) Loading sub module "dri2"
[    23.222] (II) LoadModule: "dri2"
[    23.223] (II) Module "dri2" already built-in
[    23.223] (==) Depth 24 pixmap format is 32 bpp
[    23.223] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    23.223] (==) intel(0): Backing store enabled
[    23.223] (==) intel(0): Silken mouse enabled
[    23.223] (II) intel(0): HW Cursor enabled
[    23.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.223] (==) intel(0): DPMS enabled
[    23.223] (II) intel(0): [DRI2] Setup complete
[    23.223] (II) intel(0): [DRI2]   DRI driver: i965
[    23.223] (II) intel(0): [DRI2]   VDPAU driver: i965
[    23.223] (II) intel(0): direct rendering: DRI2 Enabled
[    23.223] (==) intel(0): hotplug detection: "enabled"
[    23.223] (--) RandR disabled
[    23.228] (II) SELinux: Disabled on system
[    23.258] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.258] (II) AIGLX: enabled GLX_ARB_create_context
[    23.258] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.258] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.258] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.258] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.258] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    23.258] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    23.258] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.258] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    23.258] (II) AIGLX: Loaded and initialized i965
[    23.258] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.260] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    23.268] (II) intel(0): Setting screen physical size to 361 x 203
[    23.274] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    23.276] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    23.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.276] (II) LoadModule: "evdev"
[    23.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.295] (II) Module evdev: vendor="X.Org Foundation"
[    23.295] 	compiled for 1.15.0, module version = 2.8.2
[    23.295] 	Module class: X.Org XInput Driver
[    23.295] 	ABI class: X.Org XInput driver, version 20.0
[    23.295] (II) Using input driver 'evdev' for 'Power Button'
[    23.296] (**) Power Button: always reports core events
[    23.296] (**) evdev: Power Button: Device: "/dev/input/event2"
[    23.296] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.296] (--) evdev: Power Button: Found keys
[    23.296] (II) evdev: Power Button: Configuring as keyboard
[    23.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    23.296] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.296] (**) Option "xkb_rules" "evdev"
[    23.296] (**) Option "xkb_model" "pc105"
[    23.296] (**) Option "xkb_layout" "fr"
[    23.298] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[    23.298] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    23.298] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.298] (II) Using input driver 'evdev' for 'Video Bus'
[    23.298] (**) Video Bus: always reports core events
[    23.298] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    23.298] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.298] (--) evdev: Video Bus: Found keys
[    23.298] (II) evdev: Video Bus: Configuring as keyboard
[    23.298] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input11/event9"
[    23.298] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.298] (**) Option "xkb_rules" "evdev"
[    23.298] (**) Option "xkb_model" "pc105"
[    23.298] (**) Option "xkb_layout" "fr"
[    23.299] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    23.299] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.299] (II) Using input driver 'evdev' for 'Power Button'
[    23.299] (**) Power Button: always reports core events
[    23.299] (**) evdev: Power Button: Device: "/dev/input/event0"
[    23.299] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.299] (--) evdev: Power Button: Found keys
[    23.299] (II) evdev: Power Button: Configuring as keyboard
[    23.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[    23.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    23.299] (**) Option "xkb_rules" "evdev"
[    23.299] (**) Option "xkb_model" "pc105"
[    23.299] (**) Option "xkb_layout" "fr"
[    23.299] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    23.299] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.299] (II) Using input driver 'evdev' for 'Video Bus'
[    23.299] (**) Video Bus: always reports core events
[    23.299] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    23.299] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.299] (--) evdev: Video Bus: Found keys
[    23.299] (II) evdev: Video Bus: Configuring as keyboard
[    23.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input10/event8"
[    23.299] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    23.299] (**) Option "xkb_rules" "evdev"
[    23.299] (**) Option "xkb_model" "pc105"
[    23.299] (**) Option "xkb_layout" "fr"
[    23.300] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    23.300] (II) No input driver specified, ignoring this device.
[    23.300] (II) This device may have been added with another device file.
[    23.300] (II) config/udev: Adding drm device (/dev/dri/card1)
[    23.300] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[    23.300] (II) config/udev: Adding drm device (/dev/dri/card0)
[    23.300] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    23.300] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[    23.300] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    23.300] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    23.300] (**) Logitech USB Optical Mouse: always reports core events
[    23.300] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event4"
[    23.300] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[    23.300] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    23.300] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    23.300] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    23.300] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    23.300] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    23.300] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    23.300] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    23.300] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input7/event4"
[    23.300] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    23.300] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    23.300] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    23.300] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    23.300] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    23.300] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    23.301] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    23.301] (II) No input driver specified, ignoring this device.
[    23.301] (II) This device may have been added with another device file.
[    23.301] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event7)
[    23.301] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    23.301] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    23.301] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    23.301] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event7"
[    23.301] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x648d
[    23.301] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    23.301] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    23.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event7"
[    23.301] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    23.301] (**) Option "xkb_rules" "evdev"
[    23.301] (**) Option "xkb_model" "pc105"
[    23.301] (**) Option "xkb_layout" "fr"
[    23.301] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    23.301] (II) No input driver specified, ignoring this device.
[    23.301] (II) This device may have been added with another device file.
[    23.301] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    23.301] (II) No input driver specified, ignoring this device.
[    23.301] (II) This device may have been added with another device file.
[    23.302] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    23.302] (II) No input driver specified, ignoring this device.
[    23.302] (II) This device may have been added with another device file.
[    23.302] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    23.302] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.302] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    23.302] (**) AT Translated Set 2 keyboard: always reports core events
[    23.302] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    23.302] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    23.302] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    23.302] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    23.302] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    23.302] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    23.302] (**) Option "xkb_rules" "evdev"
[    23.302] (**) Option "xkb_model" "pc105"
[    23.302] (**) Option "xkb_layout" "fr"
[    23.302] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
[    23.302] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.302] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.302] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.302] (II) LoadModule: "synaptics"
[    23.302] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.303] (II) Module synaptics: vendor="X.Org Foundation"
[    23.303] 	compiled for 1.15.0, module version = 1.7.4
[    23.303] 	Module class: X.Org XInput Driver
[    23.303] 	ABI class: X.Org XInput driver, version 20.0
[    23.303] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.303] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.303] (**) Option "Device" "/dev/input/event5"
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 (res 0)
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.460] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.460] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.508] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[    23.508] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    23.508] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.508] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    23.508] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.061
[    23.508] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.508] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.508] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.508] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.508] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.508] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    23.508] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.509] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[    23.509] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    23.509] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    23.509] (**) Dell WMI hotkeys: always reports core events
[    23.509] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[    23.509] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    23.509] (--) evdev: Dell WMI hotkeys: Found keys
[    23.510] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    23.510] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[    23.510] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    23.510] (**) Option "xkb_rules" "evdev"
[    23.510] (**) Option "xkb_model" "pc105"
[    23.510] (**) Option "xkb_layout" "fr"
[    30.202] (II) intel(0): EDID vendor "LGD", prod id 826
[    30.202] (II) intel(0): Printing DDC gathered Modelines:
[    30.202] (II) intel(0): Modeline "1366x768"x0.0   76.50  1366 1402 1450 1546  768 771 776 824 -hsync -vsync (49.5 kHz eP)
[    30.202] (II) intel(0): Modeline "1366x768"x0.0   51.00  1366 1402 1450 1564  768 771 776 814 -hsync -vsync (32.6 kHz e)

La copie de sysinfo :

System information report, generated by Sysinfo: 30/08/2014 11:49:24
http://sourceforge.net/projects/gsysinfo

SYSTEM INFORMATION
	Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release.
	GNOME: unknown (unknown)
	Kernel version: 3.13.0-35-generic (#62-Ubuntu SMP Fri Aug 15 01:58:01 UTC 2014)
	GCC: 4.8 (i686-linux-gnu)
	Xorg: 1.15.1 (16 April 2014  01:40:08PM)
	Hostname: kikonux
	Uptime: 0 days 0 h 52 min

CPU INFORMATION
	GenuineIntel, Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
	Number of CPUs: 4
	CPU clock currently at 1200.000 MHz with 3072 KB cache
	Numbering: family(6) model(58) stepping(9)
	Bogomips: 4988.80
	Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms

MEMORY INFORMATION
	Total memory: 7960 MB
	Total swap: 3813 MB

STORAGE INFORMATION
	SCSI device -  scsi0
		Vendor:  ATA      
		Model:  ST9500325AS      
	SCSI device -  scsi2
		Vendor:  TSSTcorp 
		Model:  DVD+-RW SN-208BB 
	SCSI device -  scsi6
		Vendor:  Generic- 
		Model:  xD/SD/M.S.       

HARDWARE INFORMATION
MOTHERBOARD
	Host bridge
		Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
		Subsystem: Dell Device 056a
	PCI bridge(s)
		Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
		Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
		Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
	ISA bridge
		Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
		Subsystem: Dell Device 056a

GRAPHIC CARD
	VGA controller
		Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff) (prog-if ff)
		Subsystem: Dell Device 056a

SOUND CARD
	Multimedia controller
		Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
		Subsystem: Dell Device 056a

NETWORK
	Network controller
		Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
		Subsystem: Dell Wireless 1704 802.11n + BT 4.0
	Ethernet controller
		Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
		Subsystem: Dell Device 056a

Et le résultat de quelques commandes :

kiko@kikonux:~$ glxinfo | grep "OpenGL version"
OpenGL version string: 3.0 Mesa 10.1.3
kiko@kikonux:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] [1002:6840] (rev ff)
kiko@kikonux:~$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch
[sudo] password for kiko: 
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynOff:0000:01:00.0
kiko@kikonux:~$ 

La sortie de la dernière commande ne change pas, même si j'utilise "sudo echo ON > /sys/kernel/debug/vgaswitcheroo/switch". Est-ce grave docteur ? tongue  Dans le pire des cas, je peux toujours retourner sur les drivers fglrx, et tant pis si j'ai sur xubuntu la même perte d'autonomie que sur eOS. A noter également que j'ai essayé les derniers drivers mesa (ppa:oibaf/graphics-drivers) qui avaient causés la mort de mon installation elementary OS, et que sur mon Xubuntu celà ne faisait aucune différence. Je suis justement revenu aux drivers des dépots standarts pour voir si vga_switcheroo fonctionnait avec les drivers "de base" (c'était le cas sur eOS).

Merci aux courageux qui auront lu mon pavé jusqu'au bout wink

Hors ligne

#2 Le 31/08/2014, à 11:41

Altaille

Re : Problème graphique hybride Intel/AMD drivers libres

Je continue mon monologue tranquillement tongue J'ai trouvé un début de solution expliqué en anglais à la première réponse de ce post : forum fedora anglophone. Faut que je comprenne comment m'en servir correctement, mais sur glxgears le résultat est flagrant :

En lançant glxgears normalement :

kiko@kikonux:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.383 FPS
299 frames in 5.0 seconds = 59.668 FPS
299 frames in 5.0 seconds = 59.669 FPS

En lançant glxgears avec la commande trouvée :

kiko@kikonux:~$ DRI_PRIME=1 glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
30415 frames in 5.0 seconds = 6082.891 FPS
30842 frames in 5.0 seconds = 6168.316 FPS
30661 frames in 5.0 seconds = 6132.096 FPS

Je remarque aussi une belle baisse d'autonomie (2h20 à 85% => 1h20) avec la commande DRI_PRIME=1. Par contre en lançant steam de cette manière, les jeux ne fonctionnent pas mieux (tests sur wargame airland battle et natural selection 2, mêmes résultats qu'avec la carte intégrée, à savoir respectivement plantage au lancement de la game et menu à 4 fps). C'est un début de réponse, mais il reste du boulôt ! Je vais sans doute repasser aux drivers mesa expérimentaux (ppa:oibaf ou xorg edgers) pour voir. Réponse dans quelques jours sans doute !

Au passage si quelqu'un à une idée de jeu gratuit gourmand en ressources mais pas sur steam pour faire des essais, je prend !

Hors ligne

#3 Le 05/09/2014, à 16:05

Altaille

Re : Problème graphique hybride Intel/AMD drivers libres

Et de 3 posts tout  seul ! Je n'édite pas volontairement pour upper le sujet roll

Bon, j'ai rejeté un coup d'oeil à mon problème, mais je suis toujours bloqué ... et je comprends plus grand chose neutral  Si j'ai bien compris, les derniers kernels (3.13 et plus) permettent le dpm (dynamic power managment), donc en gros la carte discrète devrait se lancer toute seule quand nécessaire. Bien que la commande DRI_PRIME=1 semble donner de bons résultats sur glxgears (explosion du nombre de fps et diminution en flèche de l'autonomie), il semblerait que la carte discrète n'y soit pour rien yikes  Voilà je pense le gros problème : xrandr ne me montre qu'une seule carte alors que j'en ai bien 2

kiko@kikonux:~$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x48 cap: 0x9, Source Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 0 name:Intel
kiko@kikonux:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] [1002:6840] (rev ff)

Depuis mon dernier message, je suis passé aux dernières versions de drivers mesa (ppa oibaf) et j'ai modifié une ligne du fichier /etc/default/grub vu qu'apparemment ça a marché chez quelqu'un (mais pas dans mon cas) :

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.dpm=1"
#Ancienne ligne :
#GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Là je sèche vraiment hmm

Hors ligne

#4 Le 10/10/2014, à 07:38

Altaille

Re : Problème graphique hybride Intel/AMD drivers libres

Bonjour, un petit up vu que le problème persiste toujours et que je ne trouve pas de solution hmm

Hors ligne