Problemme de mise à jour libreoffice [RESOLU]

Slystone · Le 31/08/2014, à 22:57

Il faut tout relire. ^^ Et puis après le 'apt-get autoremove', on a aussi ça : « Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes. ». Donc apt a encore manifestement des problèmes à ce moment là.
Aussi j'ajouterais une demande de diagnostic une fois que toutes les commandes que j'ai demandé ont été passées :

sudo apt-get check

Edit @ vinaigrette : ça devrait être aussi une chose que tu fais, la lecture de ce que dit TON système. La précipitation n'a jamais rien résolu.

Dernière modification par Slystone (Le 31/08/2014, à 22:59)

JLK · Le 31/08/2014, à 23:09

C'est quelle version de LibreOffice sur quelle version d'Ubuntu, à propos ?

vinaigrette · Le 31/08/2014, à 23:25

voilà le résultat :

tati@tati-MS-7758:~$ sudo dpkg --remove --force-remove-reinstreq libreoffice*
[sudo] password for tati: 
dpkg : avertissement : requête pour supprimer libreoffice-impress ignorée, seuls les fichiers
de configuration sont installés. Utiliser --purge pour les supprimer aussi.
dpkg : avertissement : requête pour supprimer libreoffice-common ignorée, seuls les fichiers
de configuration sont installés. Utiliser --purge pour les supprimer aussi.
dpkg : avertissement : requête pour supprimer libreoffice-draw ignorée, seuls les fichiers
de configuration sont installés. Utiliser --purge pour les supprimer aussi.
dpkg : avertissement : requête pour supprimer libreoffice-calc ignorée, seuls les fichiers
de configuration sont installés. Utiliser --purge pour les supprimer aussi.
tati@tati-MS-7758:~$ sudo dpkg --purge libreoffice*
(Lecture de la base de données... 264315 fichiers et répertoires déjà installés.)
Suppression de libreoffice-impress ...
Suppression de libreoffice-common ...
Purge des fichiers de configuration de libreoffice-common ...
Suppression de libreoffice-draw ...
Suppression de libreoffice-calc ...
tati@tati-MS-7758:~$ sudo apt-get clean && sudo apt-get autoclean && sudo apt-get autoremove
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes.
Les paquets suivants contiennent des dépendances non satisfaites :
 python-uno : Dépend: libreoffice-core (= 1:4.3.1~rc2-0ubuntu1~precise1) mais il n'est pas installé
E: Dépendances manquantes. Essayez d'utiliser l'option -f.
tati@tati-MS-7758:~$ sudo apt-cache search libreoffice
fonts-opensymbol - OpenSymbol TrueType font
hunspell-ru - Russian dictionary for hunspell
hunspell-sv-se - Swedish (SE) dictionary for hunspell
hyphen-bn - Bengali hyphenation patterns for OpenOffice.org/LibreOffice
hyphen-gu - Gujarati hyphenation patterns for OpenOffice.org/LibreOffice
hyphen-hi - Hindi hyphenation patterns for OpenOffice.org/LibreOffice
hyphen-kn - Kannada hyphenation patterns for OpenOffice.org/LibreOffice
hyphen-pa - Punjabi hyphenation patterns for OpenOffice.org/LibreOffice
hyphen-sh - Serbian (Latin) hyphenation patterns for LibreOffice/OpenOffice.org
libreoffice-gtk - office productivity suite -- GTK+ integration
libreoffice-nlpsolver - "Solver for Nonlinear Programming" extension for LibreOffice
libreoffice-style-human - office productivity suite -- Human symbol style
mythes-de - German Thesaurus for OpenOffice.org/LibreOffice
mythes-de-ch - German Thesaurus for OpenOffice.org/LibreOffice (Swiss Version)
hyphen-en-us - motifs de césure en anglais américain pour LibreOffice/OpenOffice.org
hyphen-pl - Polish hyphenation patterns for LibreOffice/OpenOffice.org
libreoffice-base-core - Suite bureautique - bibliothèque partagée
libreoffice-calc - suite de productivité bureautique - tableur
libreoffice-common - Suite bureautique - fichiers indépendants de l'architecture
libreoffice-core - Suite bureautique - fichiers indépendants de l'architecture
libreoffice-dbg - Suite bureautique - symboles de débogage
libreoffice-dev - Suite bureautique - SDK
libreoffice-draw - Suite bureautique - dessin
libreoffice-evolution - office productivity suite -- Evolution addressbook support
libreoffice-filter-binfilter - Suite bureautique - filtres existants (par exemple, StarOffice 5.2)
libreoffice-filter-mobiledev - office productivity suite -- mobile devices filters
libreoffice-help-ca - office productivity suite -- Catalan help
libreoffice-help-cs - office productivity suite -- Czech help
libreoffice-help-da - office productivity suite -- Danish help
libreoffice-help-de - office productivity suite -- German help
libreoffice-help-dz - office productivity suite -- Dzongkha help
libreoffice-help-el - Suite bureautique - aide en grec
libreoffice-help-en-gb - office productivity suite -- English_british help
libreoffice-help-en-us - Suite bureautique - aide en anglais américain
libreoffice-help-es - Suite bureautique - aide en espagnol
libreoffice-help-et - Suite bureautique - aide en estonien
libreoffice-help-eu - Suite bureautique - aide en basque
libreoffice-help-fi - Suite bureautique - aide en finnois
libreoffice-help-fr - Suite bureautique - aide en français
libreoffice-help-gl - Suite bureautique - aide en galicien
libreoffice-help-hi - Suite bureautique - aide en hindi
libreoffice-help-hu - Suite bureautique - aide en hongrois
libreoffice-help-it - Suite bureautique - aide en italien
libreoffice-help-ja - Suite bureautique - aide en japonais
libreoffice-help-km - Suite bureautique - aide en khmer
libreoffice-help-ko - Suite bureautique - aide en coréen
libreoffice-help-nl - office productivity suite -- Dutch help
libreoffice-help-om - Suite bureautique - aide en oromo
libreoffice-help-pl - Suite bureautique - aide en polonais
libreoffice-help-pt - Suite bureautique - aide en portugais
libreoffice-help-pt-br - office productivity suite -- Portuguese_brazilian help
libreoffice-help-ru - Suite bureautique - aide en russe
libreoffice-help-sk - office productivity suite -- Slovak help
libreoffice-help-sl - Suite bureautique - aide en slovène
libreoffice-help-sv - Suite bureautique - aide en suédois
libreoffice-help-zh-cn - Suite bureautique - aide en chinois simplifié
libreoffice-help-zh-tw - Suite bureautique - aide en chinois traditionnel
libreoffice-impress - Suite bureautique - présentations
libreoffice-java-common - office productivity suite -- arch-independent Java support files
libreoffice-l10n-af - Suite bureautique - Paquet de langue afrikaans
libreoffice-l10n-ar - Suite bureautique - Paquet de langue arabe
libreoffice-l10n-as - Suite bureautique - Paquet de langue assamais
libreoffice-l10n-ast - Suite bureautique - Paquet de langue asturien
libreoffice-l10n-be - Suite bureautique - Paquet de langue bélarusse
libreoffice-l10n-bg - Suite bureautique - Paquet de langue bulgare
libreoffice-l10n-bn - Suite bureautique - Paquet de langue bengali
libreoffice-l10n-br - Suite bureautique - Paquet de langue breton
libreoffice-l10n-bs - Suite bureautique - Paquet de langue bosniaque
libreoffice-l10n-ca - office productivity suite -- Catalan language package
libreoffice-l10n-cs - office productivity suite -- Czech language package
libreoffice-l10n-cy - office productivity suite -- Welsh language package
libreoffice-l10n-da - office productivity suite -- Danish language package
libreoffice-l10n-de - suite bureautique - Paquet de langue allemande
libreoffice-l10n-dz - office productivity suite -- Dzongkha language package
libreoffice-l10n-el - office productivity suite -- Greek language package
libreoffice-l10n-en-gb - suite bureautique - Paquet de langue anglais britannique
libreoffice-l10n-en-za - suite bureautique - Paquet de langue anglais d'Afrique du Sud
libreoffice-l10n-eo - office productivity suite -- Esperanto language package
libreoffice-l10n-es - suite bureautique - Paquet de langue espagnole
libreoffice-l10n-et - office productivity suite -- Estonian language package
libreoffice-l10n-eu - office productivity suite -- Basque language package
libreoffice-l10n-fa - office productivity suite -- Farsi language package
libreoffice-l10n-fi - office productivity suite -- Finnish language package
libreoffice-l10n-fr - suite bureautique - Paquet de langue française
libreoffice-l10n-ga - office productivity suite -- Gaelic language package
libreoffice-l10n-gl - office productivity suite -- Galician language package
libreoffice-l10n-gu - office productivity suite -- Gujarati language package
libreoffice-l10n-he - office productivity suite -- Hebrew language package
libreoffice-l10n-hi - office productivity suite -- Hindi language package
libreoffice-l10n-hr - office productivity suite -- Croatian language package
libreoffice-l10n-hu - office productivity suite -- Hungarian language package
libreoffice-l10n-id - office productivity suite -- Indonesian language package
libreoffice-l10n-in - office productivity suite -- Indic language packages
libreoffice-l10n-is - office productivity suite -- Icelandic language package
libreoffice-l10n-it - suite bureautique - Paquet de langue italienne
libreoffice-l10n-ja - office productivity suite -- Japanese language package
libreoffice-l10n-ka - office productivity suite -- Georgian language package
libreoffice-l10n-km - office productivity suite -- Khmer language package
libreoffice-l10n-ko - office productivity suite -- Korean language package
libreoffice-l10n-lt - office productivity suite -- Lithuanian language package
libreoffice-l10n-lv - office productivity suite -- Latvian language package
libreoffice-l10n-mk - office productivity suite -- Macedonian language package
libreoffice-l10n-ml - office productivity suite -- Malayalam language package
libreoffice-l10n-mn - office productivity suite -- Mongolian language package
libreoffice-l10n-mr - office productivity suite -- Marathi language package
libreoffice-l10n-nb - office productivity suite -- Norwegian language package
libreoffice-l10n-nl - office productivity suite -- Dutch language package
libreoffice-l10n-nn - office productivity suite -- Norwegian_nynorsk language package
libreoffice-l10n-nr - office productivity suite -- Ndebele language package
libreoffice-l10n-nso - office productivity suite -- Northern_sotho language package
libreoffice-l10n-oc - office productivity suite -- Occitan language package
libreoffice-l10n-om - office productivity suite -- Oromo language package
libreoffice-l10n-or - office productivity suite -- Oriya language package
libreoffice-l10n-pa-in - office productivity suite -- Punjabi language package
libreoffice-l10n-pl - office productivity suite -- Polish language package
libreoffice-l10n-pt - office productivity suite -- Portuguese language package
libreoffice-l10n-pt-br - suite bureautique - Paquet de langue portugais brésilien
libreoffice-l10n-ro - office productivity suite -- Romanian language package
libreoffice-l10n-ru - suite bureautique - Paquet de langue russe
libreoffice-l10n-rw - office productivity suite -- Kinarwanda language package
libreoffice-l10n-si - office productivity suite -- Sinhala language package
libreoffice-l10n-sk - office productivity suite -- Slovak language package
libreoffice-l10n-sl - office productivity suite -- Slovenian language package
libreoffice-l10n-sr - office productivity suite -- Serbian language package
libreoffice-l10n-ss - office productivity suite -- Swazi language package
libreoffice-l10n-st - office productivity suite -- Southern_sotho language package
libreoffice-l10n-sv - office productivity suite -- Swedish language package
libreoffice-l10n-ta - office productivity suite -- Tamil language package
libreoffice-l10n-te - office productivity suite -- Telugu language package
libreoffice-l10n-tg - office productivity suite -- Tajik language package
libreoffice-l10n-th - office productivity suite -- Thai language package
libreoffice-l10n-tn - office productivity suite -- Tswana language package
libreoffice-l10n-tr - office productivity suite -- Turkish language package
libreoffice-l10n-ts - office productivity suite -- Tsonga language package
libreoffice-l10n-ug - office productivity suite -- Uighur language package
libreoffice-l10n-uk - office productivity suite -- Ukrainian language package
libreoffice-l10n-uz - office productivity suite -- Uzbek language package
libreoffice-l10n-ve - office productivity suite -- Venda language package
libreoffice-l10n-vi - office productivity suite -- Vietnamese language package
libreoffice-l10n-xh - office productivity suite -- Xhosa language package
libreoffice-l10n-za - office productivity suite -- South African language packages
libreoffice-l10n-zh-cn - office productivity suite -- Chinese_simplified language package
libreoffice-l10n-zh-tw - office productivity suite -- Chinese_traditional language package
libreoffice-l10n-zu - office productivity suite -- Zulu language package
libreoffice-math - suite de productivité bureautique - éditeur d'équations
libreoffice-officebean - office productivity suite -- Java bean
libreoffice-style-oxygen - office productivity suite -- Oxygen symbol style
libreoffice-style-tango - office productivity suite -- Tango symbol style
libreoffice-voikko - Finnish language tools for LibreOffice
libreoffice-writer - suite de productivité bureautique - traitement de texte
myspell-ku - dictionnaire kurde (Kurmanji) pour myspell
mythes-pl - Polish thesaurus for LibreOffice/OpenOffice.org
mythes-sk - Slovak Thesaurus for LibreOffice/OpenOffice.org
openoffice.org - suite de productivité bureautique
openoffice.org-base - suite de productivité bureautique - base de données
openoffice.org-common - Suite bureautique - fichiers indépendants de l'architecture
openoffice.org-help-ca - office productivity suite -- Catalan help
openoffice.org-help-cs - office productivity suite -- Czech help
openoffice.org-help-da - office productivity suite -- Danish help
openoffice.org-help-de - office productivity suite -- German help
openoffice.org-help-dz - office productivity suite -- Dzongkha help
openoffice.org-help-el - Suite bureautique - aide en grec
openoffice.org-help-en-gb - office productivity suite -- English_british help
openoffice.org-help-en-us - Suite bureautique - aide en anglais américain
openoffice.org-help-es - Suite bureautique - aide en espagnol
openoffice.org-help-et - Suite bureautique - aide en estonien
openoffice.org-help-eu - Suite bureautique - aide en basque
openoffice.org-help-fi - Suite bureautique - aide en finnois
openoffice.org-help-fr - Suite bureautique - aide en français
openoffice.org-help-gl - Suite bureautique - aide en galicien
openoffice.org-help-hi-in - Suite bureautique - aide en hindi
openoffice.org-help-hu - Suite bureautique - aide en hongrois
openoffice.org-help-it - Suite bureautique - aide en italien
openoffice.org-help-ja - Suite bureautique - aide en japonais
openoffice.org-help-km - Suite bureautique - aide en khmer
openoffice.org-help-ko - Suite bureautique - aide en coréen
openoffice.org-help-nl - office productivity suite -- Dutch help
openoffice.org-help-om - Suite bureautique - aide en oromo
openoffice.org-help-pl - Suite bureautique - aide en polonais
openoffice.org-help-pt - Suite bureautique - aide en portugais
openoffice.org-help-pt-br - office productivity suite -- Portuguese_brazilian help
openoffice.org-help-ru - Suite bureautique - aide en russe
openoffice.org-help-sl - Suite bureautique - aide en slovène
openoffice.org-help-sv - Suite bureautique - aide en suédois
openoffice.org-help-zh-cn - Suite bureautique - aide en chinois simplifié
openoffice.org-help-zh-tw - Suite bureautique - aide en chinois traditionnel
openoffice.org-hyphenation-af - Afrikaans hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-ca - Catalan hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-de - German hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-en-us - motifs de césure en anglais américain pour LibreOffice/OpenOffice.org
openoffice.org-hyphenation-fr - motifs de césure en français pour LibreOffice/OpenOffice.org
openoffice.org-hyphenation-hu - Hungarian hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-it - Italian hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-ro - Romanian hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-sh - Serbian (Latin) hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-sl - Slovenian hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-sr - Serbian (Cyrillic) hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-hyphenation-zu - Zulu hyphenation patterns for LibreOffice/OpenOffice.org
openoffice.org-l10n-af - Suite bureautique - Paquet de langue afrikaans
openoffice.org-l10n-ar - Suite bureautique - Paquet de langue arabe
openoffice.org-l10n-as - Suite bureautique - Paquet de langue assamais
openoffice.org-l10n-ast - Suite bureautique - Paquet de langue asturien
openoffice.org-l10n-be-by - Suite bureautique - Paquet de langue bélarusse
openoffice.org-l10n-bg - Suite bureautique - Paquet de langue bulgare
openoffice.org-l10n-bn - Suite bureautique - Paquet de langue bengali
openoffice.org-l10n-br - Suite bureautique - Paquet de langue breton
openoffice.org-l10n-bs - Suite bureautique - Paquet de langue bosniaque
openoffice.org-l10n-ca - office productivity suite -- Catalan language package
openoffice.org-l10n-cs - office productivity suite -- Czech language package
openoffice.org-l10n-cy - office productivity suite -- Welsh language package
openoffice.org-l10n-da - office productivity suite -- Danish language package
openoffice.org-l10n-de - suite bureautique - Paquet de langue allemande
openoffice.org-l10n-dz - office productivity suite -- Dzongkha language package
openoffice.org-l10n-el - office productivity suite -- Greek language package
openoffice.org-l10n-en-gb - suite bureautique - Paquet de langue anglais britannique
openoffice.org-l10n-en-za - suite bureautique - Paquet de langue anglais d'Afrique du Sud
openoffice.org-l10n-eo - office productivity suite -- Esperanto language package
openoffice.org-l10n-es - suite bureautique - Paquet de langue espagnole
openoffice.org-l10n-et - office productivity suite -- Estonian language package
openoffice.org-l10n-eu - office productivity suite -- Basque language package
openoffice.org-l10n-fa - office productivity suite -- Farsi language package
openoffice.org-l10n-fi - office productivity suite -- Finnish language package
openoffice.org-l10n-fr - suite bureautique - Paquet de langue française
openoffice.org-l10n-ga - office productivity suite -- Gaelic language package
openoffice.org-l10n-gl - office productivity suite -- Galician language package
openoffice.org-l10n-gu - office productivity suite -- Gujarati language package
openoffice.org-l10n-he - office productivity suite -- Hebrew language package
openoffice.org-l10n-hi-in - office productivity suite -- Hindi language package
openoffice.org-l10n-hr - office productivity suite -- Croatian language package
openoffice.org-l10n-hu - office productivity suite -- Hungarian language package
openoffice.org-l10n-id - office productivity suite -- Indonesian language package
openoffice.org-l10n-in - office productivity suite -- Indic language packages
openoffice.org-l10n-it - suite bureautique - Paquet de langue italienne
openoffice.org-l10n-ja - office productivity suite -- Japanese language package
openoffice.org-l10n-ka - office productivity suite -- Georgian language package
openoffice.org-l10n-km - office productivity suite -- Khmer language package
openoffice.org-l10n-ko - office productivity suite -- Korean language package
openoffice.org-l10n-ku - office productivity suite -- Kurdish language package
openoffice.org-l10n-lt - office productivity suite -- Lithuanian language package
openoffice.org-l10n-lv - office productivity suite -- Latvian language package
openoffice.org-l10n-mk - office productivity suite -- Macedonian language package
openoffice.org-l10n-ml - office productivity suite -- Malayalam language package
openoffice.org-l10n-mn - office productivity suite -- Mongolian language package
openoffice.org-l10n-mr - office productivity suite -- Marathi language package
openoffice.org-l10n-nb - office productivity suite -- Norwegian language package
openoffice.org-l10n-ne - office productivity suite -- Nepalese language package
openoffice.org-l10n-nl - office productivity suite -- Dutch language package
openoffice.org-l10n-nn - office productivity suite -- Norwegian_nynorsk language package
openoffice.org-l10n-nr - office productivity suite -- Ndebele language package
openoffice.org-l10n-ns - office productivity suite -- Northernsotho language package
openoffice.org-l10n-oc - office productivity suite -- Occitan language package
openoffice.org-l10n-om - office productivity suite -- Oromo language package
openoffice.org-l10n-or - office productivity suite -- Oriya language package
openoffice.org-l10n-pa-in - office productivity suite -- Punjabi language package
openoffice.org-l10n-pl - office productivity suite -- Polish language package
openoffice.org-l10n-pt - office productivity suite -- Portuguese language package
openoffice.org-l10n-pt-br - suite bureautique - Paquet de langue portugais brésilien
openoffice.org-l10n-ro - office productivity suite -- Romanian language package
openoffice.org-l10n-ru - suite bureautique - Paquet de langue russe
openoffice.org-l10n-rw - office productivity suite -- Kinarwanda language package
openoffice.org-l10n-si - office productivity suite -- Sinhala language package
openoffice.org-l10n-sk - office productivity suite -- Slovak language package
openoffice.org-l10n-sl - office productivity suite -- Slovenian language package
openoffice.org-l10n-sr - office productivity suite -- Serbian language package
openoffice.org-l10n-ss - office productivity suite -- Swazi language package
openoffice.org-l10n-st - office productivity suite -- Southern_sotho language package
openoffice.org-l10n-sv - office productivity suite -- Swedish language package
openoffice.org-l10n-ta - office productivity suite -- Tamil language package
openoffice.org-l10n-te - office productivity suite -- Telugu language package
openoffice.org-l10n-tg - office productivity suite -- Tajik language package
openoffice.org-l10n-th - office productivity suite -- Thai language package
openoffice.org-l10n-tn - office productivity suite -- Tswana language package
openoffice.org-l10n-tr - office productivity suite -- Turkish language package
openoffice.org-l10n-ts - office productivity suite -- Tsonga language package
openoffice.org-l10n-ug - office productivity suite -- Uighur language package
openoffice.org-l10n-uk - office productivity suite -- Ukrainian language package
openoffice.org-l10n-uz - office productivity suite -- Uzbek language package
openoffice.org-l10n-ve - office productivity suite -- Venda language package
openoffice.org-l10n-vi - office productivity suite -- Vietnamese language package
openoffice.org-l10n-xh - office productivity suite -- Xhosa language package
openoffice.org-l10n-za - office productivity suite -- South African language packages
openoffice.org-l10n-zh-cn - office productivity suite -- Chinese_simplified language package
openoffice.org-l10n-zh-tw - office productivity suite -- Chinese_traditional language package
openoffice.org-l10n-zu - office productivity suite -- Zulu language package
openoffice.org-thesaurus-ca - Catalan Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-cs - Czech Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-de - German Thesaurus for OpenOffice.org/LibreOffice
openoffice.org-thesaurus-de-ch - German Thesaurus for OpenOffice.org/LibreOffice (Swiss Version)
openoffice.org-thesaurus-en-us - English Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-fr - French Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-hu - Hungarian Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-ne - Nepali Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-ro - Romanian Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-ru - Russian Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-thesaurus-sk - Slovak Thesaurus for LibreOffice/OpenOffice.org
openoffice.org-voikko - Finnish language tools for LibreOffice
ure - LibreOffice UNO runtime environment
ure-dbg - LibreOffice UNO runtime environment -- debug symbols
ooohg - Set of 1600 free of charge maps for libreoffice/openoffice.org
bibus - bibliographic database
bibus-doc-en - Bibus bibliographic database documentation
docvert - converts word processor files to HTML
docvert-libreoffice - converts word processor files to HTML using LibreOffice
jabref-plugin-oo - LibreOffice plugin for JabRef
libjodconverter-java - Office formats converter - Library
libjodconverter-java-doc - Office formats converter - Library documentation
libreoffice-dmaths - Formula editor improvements for LibreOffice
libreoffice-gtk3 - office productivity suite -- GTK+ 3.0 integration
libreoffice-ogltrans - LibreOffice Impress extension for transitions using OpenGL
libreoffice-script-provider-js - JavaScript script support provider for LibreOffice scripting framework
libreoffice-sdbc-postgresql - PostgreSQL SDBC driver for LibreOffice
libreoffice-writer2latex - Writer/Calc to LaTeX converter extension for LibreOffice
libreoffice-writer2xhtml - Writer/Calc to XHTML converter extension for LibreOffice
libreoffice-zemberek - Turkish spell checker extension for LibreOffice
libwriter2latex-java - OpenOffice.org Writer/Calc to LaTeX/XHTML converter -- library
libwriter2latex-java-doc - OpenOffice.org Writer/Calc to LaTeX/XHTML converter -- javadoc
lo-menubar - A LibreOffice extension for the global menubar
python-openoffice - Python libraries for interacting with OpenOffice.org/LibreOffice
python3-uno - Python-UNO bridge
unoconv - converter between LibreOffice document formats
writer2latex - OpenOffice.org Writer/Calc to LaTeX/XHTML converter
writer2latex-manual - OpenOffice.org Writer/Calc to LaTeX/XHTML converter -- manual
docvert-openoffice.org - converts word processor files to HTML using LibreOffice
libreoffice-script-provider-bsh - BeanShell script support provider for LibreOffice scripting framework
libreoffice-style-crystal - suite bureautique - icônes du style Crystal
libreoffice-style-galaxy - office productivity suite -- Galaxy (Default) symbol style
libreoffice-style-hicontrast - office productivity suite -- Hicontrast symbol style
libreoffice-wiki-publisher - LibreOffice extension for working with MediaWiki articles
lyx - Processeur de documents
mozilla-libreoffice - office productivity suite -- Mozilla plugin
mozilla-openoffice.org - office productivity suite -- Mozilla plugin
openclipart-libreoffice - Cliparts pour la galerie LibreOffice/OpenOffice.org
openclipart-openoffice.org - Cliparts pour la galerie LibreOffice/OpenOffice.org
openoffice.org-calc - suite de productivité bureautique - feuille de calcul
openoffice.org-dmaths - Formula editor improvements for LibreOffice
openoffice.org-draw - office productivity suite -- drawing
openoffice.org-dtd-officedocument1.0 - office productivity suite -- legacy 1.0 XML DTD
openoffice.org-emailmerge - office productivity suite -- email mail merge
openoffice.org-filter-binfilter - suite bureautique -- filtres existants (par exemple, StarOffice 5.2)
openoffice.org-filter-mobiledev - office productivity suite -- mobile devices filters
openoffice.org-gnome - office productivity suite -- GNOME integration
openoffice.org-gtk - office productivity suite -- GTK+ integration
openoffice.org-impress - office productivity suite -- presentation
openoffice.org-java-common - office productivity suite -- arch-independent Java support files
openoffice.org-kde - office productivity suite -- KDE integration
openoffice.org-math - office productivity suite -- equation editor
openoffice.org-mysql-connector - MySQL Connector extension for LibreOffice
openoffice.org-officebean - office productivity suite -- Java bean
openoffice.org-ogltrans - LibreOffice Impress extension for transitions using OpenGL
openoffice.org-pdfimport - Extension LibreOffice pour importer des documents PDF
openoffice.org-presentation-minimizer - LibreOffice extension for size-efficient presentations
openoffice.org-presenter-console - LibreOffice Impress extension for a separate presenter's console
openoffice.org-report-builder - LibreOffice extension for building database reports
openoffice.org-sdbc-postgresql - LibreOffice extension for PostgreSQL SDBC driver
openoffice.org-style-andromeda - office productivity suite -- Andromeda (Classic) symbol style
openoffice.org-style-crystal - suite bureautique - icônes du style Crystal
openoffice.org-style-galaxy - office productivity suite -- Galaxy (Default) symbol style
openoffice.org-style-hicontrast - office productivity suite -- Hicontrast symbol style
openoffice.org-style-oxygen - office productivity suite -- Oxygen symbol style
openoffice.org-style-tango - office productivity suite -- Tango symbol style
openoffice.org-wiki-publisher - LibreOffice extension for working with MediaWiki articles
openoffice.org-writer - office productivity suite -- word processor
openoffice.org-writer2latex - Writer/Calc to LaTeX converter extension for LibreOffice
openoffice.org-writer2xhtml - Writer/Calc to XHTML converter extension for LibreOffice
openoffice.org-zemberek - Turkish spell checker extension for LibreOffice
myspell-en-gb - English_british dictionary for myspell
myspell-en-us - English_american dictionary for myspell
myspell-it - Italian dictionary for myspell
python-uno - Python-UNO bridge (support for old python 2)
myspell-sw - Swahili dictionary for myspell
myspell-th - Thai dictionary for myspell
myspell-af - Afrikaans dictionary for myspell
myspell-en-za - English_southafrican dictionary for myspell
uno-libs3 - LibreOffice UNO runtime environment -- public shared libraries
uno-libs3-dbg - LibreOffice UNO runtime environment -- public shared library debug symbols
libreoffice - office productivity suite (metapackage)
libreoffice-base - office productivity suite -- database
libreoffice-gnome - office productivity suite -- GNOME integration
libreoffice-report-builder-bin - LibreOffice component for building database reports -- libraries
libreoffice-pdfimport - PDF Import component for LibreOffice
libreoffice-presentation-minimizer - transitional package for the LibreOffice presentation minimizer
libreoffice-presenter-console - transitional package for the LibreOffice presenter console
libreoffice-mysql-connector - MariaDB/MySQL Connector extension for LibreOffice
libreoffice-kde - office productivity suite -- KDE integration
libreoffice-l10n-ku - transitional package for LibreOffice Kurdish l10n
libreoffice-l10n-ne - office productivity suite -- Nepali language package
libreoffice-emailmerge - transitional package for LibreOffices email mail merge
libreoffice-dev-doc - office productivity suite -- SDK documentation
libreoffice-report-builder - LibreOffice component for building database reports
mythes-en-us - English Thesaurus for LibreOffice
mythes-cs - Czech Thesaurus for LibreOffice
mythes-ru - Russian Thesaurus for LibreOffice
mythes-ne - Nepali Thesaurus for LibreOffice
mythes-hu - Hungarian Thesaurus for LibreOffice
mythes-fr - French Thesaurus for LibreOffice
mythes-ro - Romanian Thesaurus for LibreOffice
mythes-ca - Catalan Thesaurus for LibreOffice
hyphen-sr - Serbian (Cyrillic) hyphenation patterns for LibreOffice
hyphen-de - German hyphenation patterns for LibreOffice
hyphen-hu - Hungarian hyphenation patterns for LibreOffice
hyphen-it - Italian hyphenation patterns for LibreOffice
hyphen-sl - Slovenian hyphenation patterns for LibreOffice
hyphen-af - Afrikaans hyphenation patterns for LibreOffice
hyphen-zu - Zulu hyphenation patterns for LibreOffice
hyphen-fr - French hyphenation patterns for LibreOffice
hyphen-ro - Romanian hyphenation patterns for LibreOffice
hyphen-ca - Catalan hyphenation patterns for LibreOffice
accessodf - Transitional package for accessodf to libreoffice-accessodf
libreoffice-script-provider-python - Python script support provider for LibreOffice scripting framework
libreoffice-subsequentcheckbase - LibreOffice java test libraries
browser-plugin-libreoffice - office productivity suite -- Mozilla plugin
libreoffice-librelogo - Logo-like progamming language for LibreOffice
libreoffice-help-tr - office productivity suite -- Turkish help
libreoffice-help-vi - office productivity suite -- Vietnamese help
libreoffice-l10n-kk - office productivity suite -- Kazakh language package
libreoffice-avmedia-backend-gstreamer - GStreamer backend for LibreOffice
libreoffice-sdbc-firebird - Firebird SDBC driver for LibreOffice
libreoffice-sdbc-hsqldb - HSQLDB SDBC driver for LibreOffice
libreoffice-base-drivers - Database connectivity drivers for LibreOffice
libreoffice-style-sifr - office productivity suite -- Sifr symbol style
libreoffice-l10n-kmr-latn - office productivity suite -- Kurdish language package
libreoffice-l10n-gd - office productivity suite -- Scottish_gaelic language package
libreoffice-accessodf - Libreoffice extension to check accessibility of ODF documents
libaccessodf-java - library for checking accessibility in ODF/ODT documents using Libreoffice

Slystone · Le 31/08/2014, à 23:28

@ JLK : t'as la réponse au message #3.

@ vinaigrette : python-uno fait aussi partie de Libreoffice, donc il va falloir s'en débarraser :

sudo dpkg --purge python-uno

Comme le ppa de Libreoffice nous embête, il va falloir l'enlever.
Donc tu passes la commande suivante :

sudo rm /etc/apt/sources.list.d/libreoffice

Slystone · Le 31/08/2014, à 23:29

D'autre part, je vois que t'as une version dév de XFCE : xubuntu-dev-xfce-4_10-precise.list
Est-ce que je peux te demander pourquoi tu l'as installé ?

vinaigrette · Le 31/08/2014, à 23:30

Ah, pas fini on dirait :

(Lecture de la base de données... 264315 fichiers et répertoires déjà installés.)
Suppression de python-uno ...
dpkg : avertissement : lors de la suppression de python-uno, le répertoire « /usr/lib/libreoffice/share/Scripts » n'était pas vide, donc il n'a pas été supprimé.
dpkg : avertissement : lors de la suppression de python-uno, le répertoire « /usr/lib/libreoffice/share/registry » n'était pas vide, donc il n'a pas été supprimé.
dpkg : avertissement : lors de la suppression de python-uno, le répertoire « /usr/lib/libreoffice/program/services » n'était pas vide, donc il n'a pas été supprimé.
tati@tati-MS-7758:~$ sudo rm /etc/apt/sources.list.d/libreoffice
rm: impossible de supprimer «/etc/apt/sources.list.d/libreoffice»: Aucun fichier ou dossier de ce type

Slystone · Le 31/08/2014, à 23:33

Excuse moi, j'ai oublié la wildcard :

sudo rm /etc/apt/sources.list.d/libreoffice*

Et tu en profites pour supprimer les répertoires mentionnés :

sudo rm -R /usr/lib/libreoffice/

Dernière modification par Slystone (Le 31/08/2014, à 23:35)

vinaigrette · Le 31/08/2014, à 23:40

Merci, je vérifie demain; il faut faire un update?

fredoslack · Le 31/08/2014, à 23:48

vinaigrette a écrit :

Merci, je vérifie demain; il faut faire un update?

Tu peux y aller sans souci, tu vas passer à la version 14.04.1 LTS.
Comme on peut le lire dans la documentation officielle de Ubuntu, les versions LTS sont tournées vers les entreprises, compatibles avec les nouveaux matériels et davantage testées. Que du bonheur donc. Bon amusement à toi ^^

Dernière modification par fredoslack (Le 31/08/2014, à 23:49)

PPdM · Le 31/08/2014, à 23:52

vinaigrette a écrit :

Merci, je vérifie demain; il faut faire un update?

Attends Slystone et surtout ne passe pas en 14.04

Slystone · Le 31/08/2014, à 23:52

fredoslack a écrit :

vinaigrette a écrit :
Merci, je vérifie demain; il faut faire un update?
Tu peux y aller sans souci, tu vas passer à la version 14.04.1 LTS.
Comme on peut le lire dans la documentation officielle de Ubuntu, les versions LTS sont tournées vers les entreprises, compatibles avec les nouveaux matériels et davantage testées. Que du bonheur donc. Bon amusement à toi ^^

Euh… oui mais non !
Sérieux, on est déjà en train d'essayer de remettre son système en état, alors s'amener la bouche en cœur et lui dire de passer à la LTS d'après ? Non, non et non !

Slystone · Le 31/08/2014, à 23:57

Bon, on va faire un petit tour déjà. Peux-tu essayer ça stp ?

sudo apt-get update

sudo apt-get check

Si pas de problème, alors

sudo apt-get dist-upgrade

@ fredoslack : d'autre part, vu la tonne de ppa additionnels qu'il a (donc potentiellement beaucoup plus de problèmes à rencontrer au moment d'une mise à niveau), je ne lui conseillerais pas de migrer vers la nouvelle LTS pour le moment. Je lui dirais même limite de faire un dual boot s'il veut la nouvelle.

Dernière modification par Slystone (Le 01/09/2014, à 00:00)

Slystone · Le 01/09/2014, à 00:08

Si tout se passe bien au retour de ces commandes, tu pourras entrer celle-là :

sudo apt-get install -s libreoffice libreoffice-l10n-fr libreoffice-help-fr hyphen-fr libreoffice-gtk

Et seulement si c'est ok, alors enlève l'option -s (pour simulate) pour tenter l'install pour de bon.

vinaigrette · Le 01/09/2014, à 10:10

Bon, tout semble ok :

Atteint http://ppa.launchpad.net precise Release.gpg
Atteint http://ppa.launchpad.net precise Release.gpg
Atteint http://ppa.launchpad.net precise Release.gpg                           
Réception de : 1 http://ppa.launchpad.net precise Release.gpg [316 B]          
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release.gpg                           
Atteint http://security.ubuntu.com precise-security Release.gpg                
Atteint http://archive.canonical.com precise Release.gpg                       
Atteint http://security.ubuntu.com precise-security Release                    
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://archive.canonical.com precise Release                           
Réception de : 2 http://ppa.launchpad.net precise Release [12,4 kB]            
Atteint http://extras.ubuntu.com precise Release.gpg                           
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://security.ubuntu.com precise-security/main Sources               
Atteint http://extras.ubuntu.com precise Release                               
Atteint http://archive.canonical.com precise/partner Sources                   
Atteint http://fr.archive.ubuntu.com precise Release.gpg                       
Atteint http://fr.archive.ubuntu.com precise-updates Release.gpg               
Atteint http://fr.archive.ubuntu.com precise-backports Release.gpg             
Atteint http://ppa.launchpad.net precise Release                               
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://security.ubuntu.com precise-security/restricted Sources         
Atteint http://security.ubuntu.com precise-security/universe Sources           
Atteint http://security.ubuntu.com precise-security/multiverse Sources         
Atteint http://security.ubuntu.com precise-security/main amd64 Packages        
Atteint http://security.ubuntu.com precise-security/restricted amd64 Packages  
Atteint http://security.ubuntu.com precise-security/universe amd64 Packages    
Atteint http://security.ubuntu.com precise-security/multiverse amd64 Packages  
Atteint http://security.ubuntu.com precise-security/main i386 Packages         
Atteint http://security.ubuntu.com precise-security/restricted i386 Packages   
Atteint http://security.ubuntu.com precise-security/universe i386 Packages     
Atteint http://extras.ubuntu.com precise/main Sources                          
Atteint http://archive.canonical.com precise/partner amd64 Packages            
Atteint http://archive.canonical.com precise/partner i386 Packages             
Ign http://archive.canonical.com precise/partner TranslationIndex              
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://security.ubuntu.com precise-security/multiverse i386 Packages   
Atteint http://security.ubuntu.com precise-security/main TranslationIndex      
Atteint http://security.ubuntu.com precise-security/multiverse TranslationIndex
Atteint http://security.ubuntu.com precise-security/restricted TranslationIndex
Atteint http://security.ubuntu.com precise-security/universe TranslationIndex  
Atteint http://extras.ubuntu.com precise/main amd64 Packages                   
Atteint http://extras.ubuntu.com precise/main i386 Packages                    
Ign http://extras.ubuntu.com precise/main TranslationIndex                     
Atteint http://fr.archive.ubuntu.com precise Release                           
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Réception de : 3 http://ppa.launchpad.net precise/main Sources [13,8 kB]       
Atteint http://security.ubuntu.com precise-security/main Translation-en        
Atteint http://security.ubuntu.com precise-security/multiverse Translation-en  
Atteint http://security.ubuntu.com precise-security/restricted Translation-en  
Réception de : 4 http://ppa.launchpad.net precise/main amd64 Packages [9 408 B]
Réception de : 5 http://ppa.launchpad.net precise/main i386 Packages [9 408 B] 
Réception de : 6 http://ppa.launchpad.net precise/main TranslationIndex [72 B] 
Atteint http://security.ubuntu.com precise-security/universe Translation-en    
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Atteint http://fr.archive.ubuntu.com precise-updates Release                   
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://fr.archive.ubuntu.com precise-backports Release                 
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Atteint http://fr.archive.ubuntu.com precise/main Sources                      
Atteint http://fr.archive.ubuntu.com precise/restricted Sources                
Atteint http://fr.archive.ubuntu.com precise/universe Sources                  
Atteint http://fr.archive.ubuntu.com precise/multiverse Sources                
Atteint http://fr.archive.ubuntu.com precise/main amd64 Packages               
Atteint http://ppa.launchpad.net precise/main Sources                          
Atteint http://ppa.launchpad.net precise/main amd64 Packages                   
Atteint http://ppa.launchpad.net precise/main i386 Packages                    
Ign http://ppa.launchpad.net precise/main TranslationIndex                     
Réception de : 7 http://ppa.launchpad.net precise/main Translation-en [4 331 B]
Atteint http://fr.archive.ubuntu.com precise/restricted amd64 Packages         
Atteint http://fr.archive.ubuntu.com precise/universe amd64 Packages           
Atteint http://fr.archive.ubuntu.com precise/multiverse amd64 Packages         
Atteint http://fr.archive.ubuntu.com precise/main i386 Packages                
Atteint http://fr.archive.ubuntu.com precise/restricted i386 Packages          
Atteint http://fr.archive.ubuntu.com precise/universe i386 Packages            
Atteint http://fr.archive.ubuntu.com precise/multiverse i386 Packages          
Atteint http://fr.archive.ubuntu.com precise/main TranslationIndex             
Atteint http://fr.archive.ubuntu.com precise/multiverse TranslationIndex       
Atteint http://fr.archive.ubuntu.com precise/restricted TranslationIndex       
Atteint http://fr.archive.ubuntu.com precise/universe TranslationIndex         
Atteint http://fr.archive.ubuntu.com precise-updates/main Sources              
Atteint http://fr.archive.ubuntu.com precise-updates/restricted Sources        
Atteint http://fr.archive.ubuntu.com precise-updates/universe Sources          
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse Sources        
Ign http://archive.canonical.com precise/partner Translation-fr_FR             
Atteint http://fr.archive.ubuntu.com precise-updates/main amd64 Packages       
Atteint http://fr.archive.ubuntu.com precise-updates/restricted amd64 Packages 
Atteint http://fr.archive.ubuntu.com precise-updates/universe amd64 Packages   
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse amd64 Packages 
Ign http://extras.ubuntu.com precise/main Translation-fr_FR                    
Atteint http://fr.archive.ubuntu.com precise-updates/main i386 Packages        
Atteint http://fr.archive.ubuntu.com precise-updates/restricted i386 Packages  
Atteint http://fr.archive.ubuntu.com precise-updates/universe i386 Packages    
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse i386 Packages  
Atteint http://fr.archive.ubuntu.com precise-updates/main TranslationIndex     
Ign http://archive.canonical.com precise/partner Translation-fr                
Ign http://extras.ubuntu.com precise/main Translation-fr                       
Ign http://archive.canonical.com precise/partner Translation-en                
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse TranslationIndex
Ign http://extras.ubuntu.com precise/main Translation-en                       
Atteint http://fr.archive.ubuntu.com precise-updates/restricted TranslationIndex
Atteint http://fr.archive.ubuntu.com precise-updates/universe TranslationIndex
Atteint http://fr.archive.ubuntu.com precise-backports/main Sources     
Atteint http://fr.archive.ubuntu.com precise-backports/restricted Sources
Atteint http://fr.archive.ubuntu.com precise-backports/universe Sources 
Atteint http://fr.archive.ubuntu.com precise-backports/multiverse Sources
Atteint http://fr.archive.ubuntu.com precise-backports/main amd64 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/multiverse amd64 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/main i386 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/universe i386 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com precise-backports/main TranslationIndex
Atteint http://fr.archive.ubuntu.com precise-backports/multiverse TranslationIndex
Atteint http://fr.archive.ubuntu.com precise-backports/restricted TranslationIndex
Atteint http://fr.archive.ubuntu.com precise-backports/universe TranslationIndex
Atteint http://fr.archive.ubuntu.com precise/main Translation-fr_FR
Atteint http://fr.archive.ubuntu.com precise/main Translation-fr
Atteint http://fr.archive.ubuntu.com precise/main Translation-en        
Atteint http://fr.archive.ubuntu.com precise/multiverse Translation-fr_FR
Atteint http://fr.archive.ubuntu.com precise/multiverse Translation-fr  
Atteint http://fr.archive.ubuntu.com precise/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com precise/restricted Translation-fr_FR
Atteint http://fr.archive.ubuntu.com precise/restricted Translation-fr  
Atteint http://fr.archive.ubuntu.com precise/restricted Translation-en  
Atteint http://fr.archive.ubuntu.com precise/universe Translation-fr_FR 
Atteint http://fr.archive.ubuntu.com precise/universe Translation-fr    
Atteint http://fr.archive.ubuntu.com precise/universe Translation-en    
Ign http://ppa.launchpad.net precise/main Translation-fr_FR             
Ign http://ppa.launchpad.net precise/main Translation-fr                
Ign http://ppa.launchpad.net precise/main Translation-en
Ign http://ppa.launchpad.net precise/main Translation-fr_FR
Ign http://ppa.launchpad.net precise/main Translation-fr
Atteint http://fr.archive.ubuntu.com precise-updates/main Translation-fr
Atteint http://fr.archive.ubuntu.com precise-updates/main Translation-en
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com precise-updates/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com precise-updates/restricted Translation-fr
Ign http://ppa.launchpad.net precise/main Translation-en                
Ign http://ppa.launchpad.net precise/main Translation-fr_FR
Ign http://ppa.launchpad.net precise/main Translation-fr
Ign http://ppa.launchpad.net precise/main Translation-en
Ign http://ppa.launchpad.net precise/main Translation-fr_FR
Ign http://ppa.launchpad.net precise/main Translation-fr                
Ign http://ppa.launchpad.net precise/main Translation-en                
Atteint http://fr.archive.ubuntu.com precise-updates/restricted Translation-en
Atteint http://fr.archive.ubuntu.com precise-updates/universe Translation-fr
Atteint http://fr.archive.ubuntu.com precise-updates/universe Translation-en
Atteint http://fr.archive.ubuntu.com precise-backports/main Translation-en
Ign http://ppa.launchpad.net precise/main Translation-fr_FR             
Ign http://ppa.launchpad.net precise/main Translation-fr                
Ign http://ppa.launchpad.net precise/main Translation-en
Ign http://ppa.launchpad.net precise/main Translation-fr_FR
Ign http://ppa.launchpad.net precise/main Translation-fr
Ign http://ppa.launchpad.net precise/main Translation-en                
Ign http://ppa.launchpad.net precise/main Translation-fr_FR             
Ign http://ppa.launchpad.net precise/main Translation-fr                
Ign http://ppa.launchpad.net precise/main Translation-en                
Ign http://ppa.launchpad.net precise/main Translation-fr_FR             
Ign http://ppa.launchpad.net precise/main Translation-fr                
Ign http://ppa.launchpad.net precise/main Translation-en                
Ign http://ppa.launchpad.net precise/main Translation-fr_FR
Ign http://ppa.launchpad.net precise/main Translation-fr
Ign http://ppa.launchpad.net precise/main Translation-en
Atteint http://fr.archive.ubuntu.com precise-backports/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com precise-backports/restricted Translation-en
Atteint http://fr.archive.ubuntu.com precise-backports/universe Translation-en
49,7 ko réceptionnés en 1s (25,3 ko/s)
Lecture des listes de paquets... Fait
tati@tati-MS-7758:~$ sudo apt-get check
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
tati@tati-MS-7758:~$ sudo apt-get dist-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Les ppa additionnels, jusque là ne m'avait pas posé probleme; d'ailleurs je ne comprends pas bien avec libreoffice dans la mesure ou c'est installé par défaut sur toute version.
Pour la 14.04 effectivement j'aime autant attendre, j'avais eu de bon gros problemes il y a qq mois .
pour le # 36, voilà :

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
hyphen-fr est déjà la plus récente version disponible.
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation : 

Les paquets suivants contiennent des dépendances non satisfaites :
 libreoffice : Dépend: libreoffice-core (= 1:3.5.7-0ubuntu6.1) mais ne sera pas installé
               Dépend: libreoffice-writer mais ne sera pas installé
               Dépend: libreoffice-calc mais ne sera pas installé
               Dépend: libreoffice-impress mais ne sera pas installé
               Dépend: libreoffice-draw mais ne sera pas installé
               Dépend: libreoffice-math mais ne sera pas installé
               Dépend: libreoffice-base mais ne sera pas installé
               Dépend: libreoffice-filter-mobiledev mais ne sera pas installé
               Dépend: libreoffice-java-common (>= 1:3.5.7~) mais ne sera pas installé
               Recommande: libreoffice-gnome mais ne sera pas installé ou
                           libreoffice-kde mais ne sera pas installé
 libreoffice-gtk : Dépend: libreoffice-core (= 1:3.5.7-0ubuntu6.1) mais ne sera pas installé
                   Recommande: libreoffice-style-tango mais ne sera pas installé
 libreoffice-help-fr : Dépend: libreoffice-writer mais ne sera pas installé ou
                                language-support-translations-fr mais il n'est pas installable
                       Recommande: libreoffice-core (> 1:3.5.7) mais ne sera pas installé ou
                                   language-support-translations-fr mais il n'est pas installable
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
tati@tati-MS-7758:~$

nam1962 · Le 01/09/2014, à 10:40

Tu n'arrives toujours pas à nous recopier le contenu de

gedit /var/lib/dpkg/status

?

vinaigrette · Le 01/09/2014, à 10:45

Salut nam ça ne change pas, copier/coller donne ça :
Request Entity Too Large
The requested resource
/post.php
does not allow request data with POST requests, or the amount of data provided in the request exceeds the capacity limit.

nam1962 · Le 01/09/2014, à 11:10

Alors colle le en plusieurs morceaux

Slystone · Le 01/09/2014, à 11:27

Sur ton avant-dernier post, c'était pour quoi ce que t'as mis en-dessous de « pour le # 36, voilà :  » ?
T'as fait la simulation comme je te l'ai conseillé ?

@ nam1962 : si tous les paquets de Libreoffice ont pu être enlevés, il n'y a plus besoin de toucher au status.

Par contre vinaigrette, tu as essayé ça pour une dernière vérification ?

sudo apt-get remove libreoffice*

Dernière modification par Slystone (Le 01/09/2014, à 11:30)

vinaigrette · Le 01/09/2014, à 11:36

@slystone
désolé petite dyslexie c'est le #63, et donc je ne suis pas sur de devoir continuer en enlevant le "simulate" (avant d'aller au #68); dépendances non satisfaites,etc...

vinaigrette · Le 01/09/2014, à 11:40

Package: xserver-xorg-input-vmmouse
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:12.9.0-0ubuntu0.1
Provides: xorg-driver-input
Depends: libc6 (>= 2.7), xorg-input-abi-16, xserver-xorg-core (>= 2:1.10.99.901), xserver-xorg-input-mouse, udev
Description: X.Org X server -- VMMouse input driver to use with VMWare
 This package provides the driver for the X11 vmmouse input device.
 .
 The VMMouse driver enables support for the special VMMouse protocol
 that is provided by VMware virtual machines to give absolute pointer
 positioning.
 .
 The vmmouse driver is capable of falling back to the standard "mouse"
 driver if a VMware virtual machine is not detected. This allows for
 dual-booting of an operating system from a virtual machine to real hardware
 without having to edit xorg.conf every time.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This package is built from the X.org xf86-input-vmmouse driver module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libexempi3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: exempi
Version: 2.2.0-1
Depends: libc6 (>= 2.14), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: library to parse XMP metadata (Library)
 Exempi is a library to parse XMP metadata as defined by the
 specification.
 .
 XMP (Extensible Metadata Platform) facilitates embedding metadata in files
 using a subset of RDF. Most notably XMP supports embedding metadata in PDF
 and many image formats, though it is designed to support nearly any file type.
Original-Maintainer: Asheesh Laroia <asheesh@asheesh.org>
Homepage: http://libopenraw.freedesktop.org/wiki/Exempi

Package: libgtkspell0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gtkspell
Version: 2.0.16-1ubuntu5
Depends: libc6 (>= 2.2.5), libenchant1c2a (>= 1.6), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.8.0)
Description: a spell-checking addon for GTK's TextView widget
 GtkSpell provides MSWord/MacOSX-style highlighting of misspelled words in a
 GtkTextView widget.  Right-clicking a misspelled word pops up a menu of
 suggested replacements.
Original-Maintainer: Ari Pollak <ari@debian.org>

Package: python-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: distribute
Version: 0.6.24-1ubuntu1
Replaces: python2.3-setuptools, python2.4-setuptools
Provides: python2.6-setuptools, python2.7-setuptools
Depends: python (>= 2.6), python (<< 2.8)
Suggests: python-distribute, python-distribute-doc
Conflicts: python-setuptools (<< 0.6c8-3), python2.3-setuptools (<< 0.6b2), python2.4-setuptools (<< 0.6b2)
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://packages.python.org/distribute
Python-Version: 2.6, 2.7

Package: libavutil-extra-51
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libav-extra
Version: 4:0.8.15ubuntu0.12.04.1
Replaces: libavutil51
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: libavutil51
Description: Libav utility library
 Libav is a complete, cross-platform solution to decode, encode, record,
 convert and stream audio and video.
 .
 This is the common utility library from Libav. It contains shared code
 used by all other Libav libraries.
Built-Using: libav (= 4:0.8.15-0ubuntu0.12.04.1)
Homepage: http://libav.org/
Original-Maintainer: Debian multimedia packages maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: tcpd
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: net
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: tcp-wrappers
Version: 7.6.q-21
Replaces: libwrap0 (<< 7.6-8)
Depends: libc6 (>= 2.4), libwrap0 (>= 7.6-4~)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libthunar-vfs-1-common
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 1400
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: thunar-vfs
Version: 1.2.0-3build1
Replaces: thunar-data (<< 1.1.0)
Description: Provides thunar-vfs documentation, icons and translations
 This package contains architecture-independent files for thunar-vfs.
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: xfce4-battery-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 875
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 1.0.5-1~ppa1
Depends: libc6 (>= 2.15), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.12.0), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), xfce4-panel (>= 4.9.2)
Description: battery monitor plugin for the Xfce4 panel
 A battery monitor panel plugin for Xfce4, compatible with APM and ACPI, using
 either /proc files or the new sysfs files for recent kernels.  You can use this
 applet to monitor your battery level and be notified when your battery reaches
 low and critcal levels. The applet can even be programmed to execute a command
 on low and critcal levels.
Homepage: http://goodies.xfce.org/

Package: libnotify-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libnotify
Version: 0.7.5-1
Depends: libc6 (>= 2.3.4), libglib2.0-0 (>= 2.26), libnotify4 (>= 0.7.3)
Description: sends desktop notifications to a notification daemon (Utilities)
 A library that sends desktop notifications to a notification daemon, as
 defined in the Desktop Notifications spec. These notifications can be
 used to inform the user about an event or display some form of
 information without getting in the user's way.
 .
 This package contains the binary which sends the notification.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libfftw3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: fftw3
Version: 3.3-1ubuntu1
Replaces: fftw3
Provides: fftw3
Depends: libc6 (>= 2.4)
Suggests: libfftw3-dev
Conflicts: fftw3
Description: library for computing Fast Fourier Transforms
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 versions of the fftw libraries in single, double and long double precisions.
 Note that on some architectures double is the same as long double in which
 case there is no long double library.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://fftw.org

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: sane-utils
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 547
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: sane-backends
Version: 1.0.22-7ubuntu1
Replaces: libsane (<< 1.0.11-4)
Depends: adduser (>= 3.47), update-inetd (>= 4.31), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.4), libieee1284-3, libsane (>= 1.0.11-3), libusb-0.1-4 (>= 2:0.1.12), debconf (>= 0.5) | debconf-2.0
Suggests: avahi-daemon, unpaper
Conffiles:
 /etc/sane.d/saned.conf f6f398e55f5821d21abfec8973cf23bc
 /etc/default/saned d8049f8628d82ab09dfb6d0cc5a83ce7
 /etc/init.d/saned e950d8b1799ddebfcaf7f90204c848ac
Description: API library for scanners -- utilities
 SANE stands for "Scanner Access Now Easy" and is an application
 programming interface (API) that provides standardized access to any
 raster image scanner hardware (flatbed scanner, hand-held scanner,
 video- and still-cameras, frame-grabbers, etc.). The SANE standard is
 free and its discussion and development are open to everybody. The
 current source code is written to support several operating systems,
 including GNU/Linux, OS/2, Win32 and various Unices and is available
 under the GNU General Public License (commercial applications and
 backends are welcome, too, however).
 .
 This package includes the command line frontend scanimage, the saned
 server and the sane-find-scanner utility, along with their documentation.
Homepage: http://www.sane-project.org
Original-Maintainer: Julien BLACHE <jblache@debian.org>

Package: libgpod-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgpod
Version: 0.8.2-4
Replaces: libgpod0 (<< 0.3.0-4)
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libgpod4-nogtk (>= 0.7.90) | libgpod4 (>= 0.7.90), libimobiledevice2 (>= 0.9.7), libplist1 (>= 0.16), libsgutils2-2 (>= 1.27), libusb-1.0-0 (>= 2:1.0.8), libxml2 (>= 2.7.4)
Description: common files for libgpod
 libgpod is a library meant to abstract access to an iPod's content. It
 provides an easy to use API to retrieve the list of files and playlist
 stored on an iPod, to modify them and to save them back to the iPod.
 .
 This package contains
  - internationalization support
  - udev support
Original-Maintainer: gtkpod Maintainers <pkg-gtkpod-devel@lists.alioth.debian.org>
Homepage: http://www.gtkpod.org/wiki/Libgpod

Package: java-common
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: java
Installed-Size: 242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.43ubuntu2
Suggests: default-jre, equivs
Description: Base of all Java packages
 This package must be installed in the system if a Java environment
 is desired. It covers useful information for Java users in
 Debian GNU/Linux, including:
  * The Java policy document which describes the layout of Java support in
    Debian and how Java packages should behave.
  * The Debian-Java-FAQ which provides information on the status of
    Java support in Debian, available compilers, virtual machines, Java
    programs and libraries as well as on legal issues.
  * Information on how to create dummy packages to fulfill java2
    requirements.
Original-Maintainer: Debian Java Mailing List <debian-java@lists.debian.org>

Package: python-lxml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxml
Version: 2.3.2-1ubuntu0.2
Replaces: python2.3-lxml, python2.4-lxml
Provides: python2.7-lxml
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), libc6 (>= 2.14), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.26)
Suggests: python-lxml-dbg
Conflicts: python2.3-lxml, python2.4-lxml
Description: pythonic binding for the libxml2 and libxslt libraries
 lxml is a new Python binding for libxml2 and libxslt, completely
 independent from existing Python bindings. Its aim:
 .
   * Pythonic API.
   * Documented.
   * Use Python unicode strings in API.
   * Safe (no segfaults).
   * No manual memory management!
 .
 lxml aims to provide a Pythonic API by following as much as possible
 the ElementTree API, trying to avoid inventing too many new APIs,
 or the user's having to learn new things -- XML is complicated enough.
Homepage: http://codespeak.net/lxml/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: xfdesktop4
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 493
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 4.10.2-0ubuntu1~ppa0.12.04.1
Replaces: xfdesktop4-data (<< 4.5.92)
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libexo-1-0 (>= 0.5.0), libgarcon-1-0 (>= 0.1.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgtk2.0-0 (>= 2.24.0), libnotify4 (>= 0.7.0), libpango1.0-0 (>= 1.14.0), libthunarx-2-0 (>= 1.1.0), libwnck22 (>= 1:2.22), libx11-6, libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), xfdesktop4-data (= 4.10.2-0ubuntu1~ppa0.12.04.1), exo-utils
Recommends: dbus-x11, librsvg2-common, xdg-user-dirs, tumbler
Suggests: menu
Description: xfce desktop background, icons and root menu manager
 xfdesktop4 sets the background image, provides a right-click menu to
 launch applications and can optionally show files (including application
 launchers) or iconified windows. It includes gradient support for
 background color, saturation support for background image, real multiscreen
 and xinerama support.
Homepage: http://www.xfce.org/

Package: hwdata
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.233-1ubuntu1
Depends: usbutils, pciutils
Description: hardware identification / configuration data
 This package contains various hardware identification and configuration data,
 such as the pci.ids database, or the XFree86/xorg Cards database.
 It's needed for the kudzu hardware detection.
Homepage: http://git.fedorahosted.org/git/hwdata.git
Original-Maintainer: Noël Köthe <noel@debian.org>

Package: libpam-winbind
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: net
Installed-Size: 1819
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: samba
Version: 2:3.6.3-2ubuntu2.11
Replaces: samba (<= 2.2.3-2), winbind (<< 2:3.5.11~dfsg-3)
Depends: libc6 (>= 2.15), libcap2 (>= 2.10), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 1.1.3-2~), libtalloc2 (>= 2.0.4~git20101213), libtdb1 (>= 1.2.7+git20101214), libwbclient0 (= 2:3.6.3-2ubuntu2.11), winbind (= 2:3.6.3-2ubuntu2.11), samba-common (= 2:3.6.3-2ubuntu2.11), libpam-runtime (>= 1.0.1-6)
Breaks: winbind (<< 2:3.5.11~dfsg-3)
Description: Samba nameservice and authentication integration plugins
 Samba is an implementation of the SMB/CIFS protocol for Unix systems,
 providing support for cross-platform file and printer sharing with
 Microsoft Windows, OS X, and other Unix systems.  Samba can also function
 as an NT4-style domain controller, and can integrate with both NT4 domains
 and Active Directory realms as a member server.
 .
 This package provides pam_winbind and nss_winbind, plugins that integrate
 with a local winbindd server to provide Windows domain authentication and
 user/group name lookups to the system; and nss_wins, which provides
 hostname lookups via both the NBNS and NetBIOS broadcast protocols.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>

Package: apturl-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 180
Maintainer: Michael Vogt <mvo@ubuntu.com>
Architecture: amd64
Source: apturl
Version: 0.5.1ubuntu3
Replaces: apturl (<< 0.3.6ubuntu2)
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-apt
Conffiles:
 /etc/firefox/pref/apturl.js 127752b25e18c94a368c4327858926a7
Description: install packages using the apt protocol - common data
 AptUrl is a simple graphical application that takes an URL (which follows the
 apt-protocol) as a command line option, parses it and carries out the
 operations that the URL describes (that is, it asks the user if he wants the
 indicated packages to be installed and if the answer is positive does so for
 him).
 .
 This package contains the common data shared between the frontends.
Python-Version: 2.7

Package: liblangtag1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: amd64
Source: liblangtag
Version: 0.5.1-2~precise2
Depends: libc6 (>= 2.8), libxml2 (>= 2.7.4), liblangtag-common (= 0.5.1-2~precise2)
Description: library to access tags for identifying languages
 liblangtag is an interface library to access/deal with tags for
 identifying languages, which is described in RFC 5646
Homepage: http://tagoh.bitbucket.org/liblangtag/

Package: fonts-kacst
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1000
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.01+mry-3
Replaces: ttf-kacst (<< 2.01+mry-2)
Provides: ttf-kacst
Recommends: fonts-kacst-one
Conflicts: ttf-kacst (<< 2.01+mry-2)
Description: KACST free TrueType Arabic fonts
 This is a set of TrueType Arabic fonts released by the King Abdulaziz
 City for Science and Technology (KACST).
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>

Package: fonts-tlwg-waree
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 426
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: fonts-tlwg
Version: 1:0.4.17-1ubuntu1
Replaces: ttf-thai-tlwg (<< 1:0.4.16)
Breaks: ttf-thai-tlwg (<< 1:0.4.16)
Conffiles:
 /etc/fonts/conf.avail/64-11-tlwg-waree.conf b77354ebcfebfd1b9e6462c8ad723e52
 /etc/fonts/conf.avail/89-tlwg-waree-synthetic.conf a160818069abee603b0fddb24e400633
Description: Thai Waree font
 This package provides Thai Waree font from TLWG.
 .
 The font provides DejaVu-compatible Thai glyphs with metrics optimized
 for on-screen user interface. For example, line spacing is reduced from
 regular typographic designs to allow more lines displayed on screen.
Homepage: http://linux.thai.net/projects/thaifonts-scalable
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: libgssdp-1.0-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gssdp
Version: 0.12.1-2
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.22.0), libsoup2.4-1 (>= 2.26.1)
Description: GObject-based library for SSDP
 A GObject-based API for doing SSDP (Simple Service Discovery Protocol)
 transparently.
Original-Maintainer: Ross Burton <ross@debian.org>
Homepage: http://www.gupnp.org

Package: libbluray1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libbluray
Version: 1:0.2.1+git20111208.63e308d-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: libaacs0
Suggests: libbluray-bdj
Description: Blu-ray disc playback support library (shared library)
 libbluray is an open-source library designed for Blu-Ray Discs playback for
 media players, like VLC or MPlayer. This research project is developed by an
 international team of developers from Doom9. libbluray integrates navigation,
 playlist parsing, menus, and BD-J.
 .
 NB: Most commercial Blu-Ray are restricted by AACS or BD+ technologies and this
 library is not enough to playback those discs.
 .
 This package provides the shared library.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://www.videolan.org/developers/libbluray.html

Package: libjson-glib-1.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: json-glib
Version: 0.14.2-1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.28.0)
Pre-Depends: multiarch-support
Description: GLib JSON manipulation library
 JSON-GLib is a library for parsing, generating and manipulating JavaScript
 Object Notation (JSON) data streams using the GLib type system. It allows
 manipulating JSON data types with a Document Object Model API. It also
 allows serializing and deserializing simple or complex GObjects to and
 from JSON data types.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://live.gnome.org/JsonGlib

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.00-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libtimedate-perl
Breaks: libwww-perl (<< 6.00)
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/HTTP-Date/

Package: debconf
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 609
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Version: 1.5.42ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: xserver-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1454
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: all
Source: xorg-server
Version: 2:1.11.4-0ubuntu10.14
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Description: common files used by various X servers
 This package provides files necessary for all X.Org based X servers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libgnomekbd7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 161
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgnomekbd
Version: 3.4.0.2-1ubuntu0.1
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0), libgtk-3-0 (>= 3.0.0), libpango1.0-0 (>= 1.22.0), libx11-6, libxklavier16 (>= 5.0), libgnomekbd-common (>= 3.4.0.2-1ubuntu0.1), iso-codes
Description: GNOME library to manage keyboard configuration - shared library
 libgnomekbd offers an API to manage the keyboard in GNOME applications.
 .
 libgnomekbdui offers an API to display a graphical user interface for
 libgnomekbd operations.
 .
 This package contains the shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gnome-brave-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1825
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnome-colors
Version: 5.5.1-1ubuntu1
Depends: gnome-colors-common
Suggests: shiki-brave-theme
Conflicts: xubuntu-artwork (<= 0.27)
Description: blue variation of the GNOME-Colors icon theme
 GNOME-Colors is a set of GNOME icon themes, with some inspiration from
 Tango, Elementary, Discovery, Tango Generator and others.
 .
 Its goal is to create an easy way for anyone to make their desktop
 consistently match their moods, wallpapers, laptop colors, etc.
 .
 The icons were designed to match the Shiki-Colors GTK+ Themes and their
 additional artwork.
 .
 This package provides the GNOME-Brave (Blue) variation of the
 GNOME-Colors icon theme.
Original-Maintainer: GNOME-Colors Packagers <gnome-colors-packagers@lists.launchpad.net>
Homepage: http://code.google.com/p/gnome-colors/

Package: shotwell
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 6760
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 0.12.3-0ubuntu0.1
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libexif12, libgdk-pixbuf2.0-0 (>= 2.22.0), libgee2 (>= 0.5.0), libgexiv2-1 (>= 0.3.92), libglib2.0-0 (>= 2.31.8), libgomp1 (>= 4.2.1), libgphoto2-2 (>= 2.4.10.1), libgphoto2-port0 (>= 2.4.10.1), libgstreamer-plugins-base0.10-0 (>= 0.10.32), libgstreamer0.10-0 (>= 0.10.28), libgtk-3-0 (>= 3.0.11), libgudev-1.0-0 (>= 147), liblaunchpad-integration-3.0-1 (>= 0.1.17), libpango1.0-0 (>= 1.18.0), libraw5 (>= 0.14.0), librest-0.7-0 (>= 0.7), libsoup2.4-1 (>= 2.26.1), libsqlite3-0 (>= 3.5.9), libunique-3.0-0 (>= 2.90.1), libunity9 (>= 3.4.6), libwebkitgtk-3.0-0 (>= 1.3.10), libxml2 (>= 2.7.4), dconf-gsettings-backend | gsettings-backend, librsvg2-common, dbus-x11
Description: digital photo organizer
 Shotwell is a digital photo organizer designed for the GNOME desktop
 environment. It allows you to import photos from disk or camera, organize
 them in various ways, view them in full-window or fullscreen mode, and
 export them to share with others.
Homepage: http://yorba.org/shotwell/
Original-Maintainer: Debian Shotwell Maintainers <pkg-shotwell-maint@lists.alioth.debian.org>

Package: python-aptdaemon
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 442
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: aptdaemon
Version: 0.43+bzr805-0ubuntu9
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-apt (>= 0.7.96.1ubuntu9), python-debian, python-defer, python-dbus, python-gi, gir1.2-glib-2.0, python-pkg-resources, python-software-properties, policykit-1
Recommends: aptdaemon
Description: Python module for the server and client of aptdaemon
 Aptdaemon is a transaction based package management service. It allows
 normal users to perform package management tasks, e.g. refreshing the
 cache, upgrading the system, installing or removing software packages.
 .
 This package provides the Python modules required to run aptdaemon
 and to implement a client. The API is not stable yet.
Homepage: https://launchpad.net/aptdaemon
Original-Maintainer: Julian Andres Klode <jak@debian.org>
Python-Version: 2.7

Package: gtk2-engines-murrine
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: x11
Installed-Size: 312
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.98.2-0ubuntu1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.5-4), libpango1.0-0 (>= 1.14.0), libpixman-1-0 (>= 0.15.14)
Suggests: murrine-themes (>= 0.98)
Description: cairo-based gtk+-2.0 theme engine
 "Murrine" is an Italian word meaning the glass artworks done by Venicians
 glass blowers. The Engine is cairo-based, and it's very fast compared to
 clearlooks-cairo and ubuntulooks.
 .
 This package includes the Murrine engine.
Original-Maintainer: Yves-Alexis Perez <corsac@debian.org>

Package: hddtemp
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.3-beta15-51
Depends: libc6 (>= 2.4), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.0-3)
Suggests: ksensors
Conflicts: gkrellm-hddtemp (<< 0.1-9), ksensors (<< 0.7-8)
Conffiles:
 /etc/logcheck/ignore.d.server/hddtemp 90bdb8807ba5aea5796629a20f58c9ef
 /etc/init.d/hddtemp 6db304eba5d7660b71cb9ff3d61a9b69
 /etc/hddtemp.db e0e140cb1c90ccf5dfe847eb34f29260
Description: hard drive temperature monitoring utility
 The hddtemp program monitors and reports the temperature of PATA, SATA
 or SCSI hard drives by reading Self-Monitoring Analysis and Reporting
 Technology (S.M.A.R.T.) information on drives that support this feature.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.guzu.net/linux/hddtemp.php

Package: libelf1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: elfutils
Version: 0.152-1ubuntu3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://fedorahosted.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>

Package: memtest86+
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 2404
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.20-1.1ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0
Suggests: hwtools, memtester, kernel-patch-badram, memtest86, grub-pc | grub-legacy, mtools
Conffiles:
 /etc/grub.d/20_memtest86+ 6dc48efccb95680ab07349956a48fef3
Description: thorough real-mode memory tester
 Memtest86+ scans your RAM for errors.
 .
 This tester runs independently of any OS - it is run at computer
 boot-up, so that it can test *all* of your memory.  You may want to
 look at `memtester', which allows to test your memory within Linux,
 but this one won't be able to test your whole RAM.
 .
 It can output a list of bad RAM regions usable by the BadRAM kernel
 patch, so that you can still use your old RAM with one or two bad bits.
 .
 Memtest86+ is based on memtest86 3.0, and adds support for recent
 hardware, as well as a number of general-purpose improvements,
 including many patches to memtest86 available from various sources.
 .
 Both memtest86 and memtest86+ are being worked on in parallel.
Homepage: http://www.memtest.org/
Original-Maintainer: Yann Dirson <dirson@debian.org>

Package: cuetools
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.3.1-12
Depends: libc6 (>= 2.3.4), id3v2
Recommends: flac
Enhances: shntool
Description: tools for manipulating CUE/TOC files
 cuetools is a set of programs that are useful for manipulating CUE sheet
 (cue) files and Table of Contents (toc) files. CUE and TOC files are a way
 to represent the layout of a data or audio CD in a machine-readable ASCII
 format. The package includes these utilities:
 .
    - cueconvert: convert between CUE and TOC formats
    - cuebreakpoints: print the breakpoints from a CUE or TOC file
    - cueprint: print disc and track information for a CUE or TOC file
    - cuetag: tag files based on CUE/TOC file information
 .
 Probably the most popular use is to split a large audio file into many
 small files according to a CUE or TOC, for example:
 .
 cuebreakpoints disc.cue | shnsplit disc.wav
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://developer.berlios.de/projects/cuetools

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 215
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.5.7-2ubuntu2
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: gimp
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 15421
Maintainer: Otto Meier <otto@kesselgulasch.org>
Architecture: amd64
Version: 2.8.14-0precise0~ppa
Replaces: gimp-plugin-registry (<< 4.20120506)
Provides: gimp-helpbrowser, gimp-python
Depends: libgimp2.0 (>= 2.8.14), libgimp2.0 (<= 2.8.14-z), gimp-data (>= 2.8.14), gimp-data (<= 2.8.14-z), python-gtk2 (>= 2.8.0), libaa1 (>= 1.4p5), libbabl-0.1-0 (>= 0.1.10), libbz2-1.0, libc6 (>= 2.15), libcairo2 (>= 1.10.2), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libexif12, libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libgegl-0.2-0, libglib2.0-0 (>= 2.31.8), libgs9 (>= 8.61.dfsg.1), libgtk2.0-0 (>= 2.24.10), libgudev-1.0-0 (>= 147), libjasper1, libjpeg8 (>= 8c), liblcms1 (>= 1.15-1), libmng1 (>= 1.0.10), libpango1.0-0 (>= 1.29.4), libpng12-0 (>= 1.2.13-4), libpoppler-glib8 (>= 0.18), librsvg2-2 (>= 2.14.4), libtiff4, libwebkitgtk-1.0-0 (>= 1.3.10), libwmf0.2-7 (>= 0.2.8.4), libx11-6, libxcursor1 (>> 1.1.2), libxext6, libxfixes3, libxmu6, libxpm4, zlib1g (>= 1:1.1.4), python (>= 2.7.1-0ubuntu2), python2.7
Recommends: ghostscript
Suggests: gimp-help-en | gimp-help, gimp-data-extras, gvfs-backends, libasound2
Breaks: gimp-plugin-registry (<< 4.20120506)
Description: The GNU Image Manipulation Program
 GIMP is an advanced picture editor. You can use it to edit, enhance, and
 retouch photos and scans, create drawings, and make your own images.
 It has a large collection of professional-level editing tools and
 filters, similar to the ones you might find in Photoshop. Numerous
 fine-control settings and features like layers, paths, masks, and
 scripting give you total control over your images.
 .
 Many image file formats are supported, including JPEG, Photoshop (.psd),
 and Paint Shop Pro (.psp) files. It can also be used to scan and print
 photos.
 .
 To open files remotely (like over HTTP), install the gvfs-backends
 package.
 .
 To use a MIDI device (like a musical keyboard) as an input controller in GIMP,
 install libasound2 and read the how-to at /usr/share/doc/gimp/README.MIDI
Homepage: http://www.gimp.org/
Original-Maintainer: Ari Pollak <ari@debian.org>

Package: libsocket6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 94
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.23-1build2
Depends: perl (>= 5.14.2-3build1), perlapi-5.14.2, libc6 (>= 2.4), perl-base (>= 5.8.0-10)
Description: Perl extensions for IPv6
 This module supports getaddrinfo() and getnameinfo() to intend to enable
 protocol independent programming. If your environment supports IPv6,
 IPv6 related defines such as AF_INET6 are included.
Original-Maintainer: Masahito Omote <omote@debian.org>

Package: libmagickcore4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5663
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: imagemagick
Version: 8:6.6.9.7-5ubuntu3.3
Depends: libbz2-1.0, libc6 (>= 2.14), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libgomp1 (>= 4.2.1), libjasper1, libjpeg8 (>= 8c), liblcms1 (>= 1.15-1), liblqr-1-0 (>= 0.1.0), libltdl7 (>= 2.4.2), libpng12-0 (>= 1.2.13-4), libtiff4, libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-common
Recommends: ghostscript, gsfonts
Suggests: libmagickcore4-extra
Description: low-level image manipulation library
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exlusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
Homepage: http://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: libatspi2.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: at-spi2-core
Version: 2.4.2-0ubuntu0.1
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.1.1), libglib2.0-0 (>= 2.22.0), libx11-6
Pre-Depends: multiarch-support
Recommends: at-spi2-core (= 2.4.2-0ubuntu0.1)
Description: Assistive Technology Service Provider Interface - shared library
 This package contains the shared library for applications that wish to use
 the at-spi interface.
Homepage: http://live.gnome.org/Accessibility/GNOME3
Original-Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>

Package: libart-2.0-2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libart-lgpl
Version: 2.3.21-1ubuntu0.1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Library of functions for 2D graphics - runtime files
 A library of functions for 2D graphics supporting a superset of the
 PostScript imaging model, designed to be integrated with graphics, artwork,
 and illustration programs. It is written in optimized C, and is fully
 compatible with C++. With a small footprint of 10,000 lines of code, it is
 especially suitable for embedded applications.
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: ibus-gtk3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: utils
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ibus
Version: 1.4.1-3ubuntu1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libgtk-3-0 (>= 3.0.0), libibus-1.0-0, libpango1.0-0 (>= 1.14.0)
Description: Intelligent Input Bus - GTK+3 support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GTK+3 IM module.
Homepage: http://code.google.com/p/ibus/
Original-Maintainer: IME Packaging Team <pkg-ime-devel@lists.alioth.debian.org>

Package: libgtk-3-common
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gtk+3.0
Version: 3.4.2-0ubuntu0.8
Replaces: libgtk3.0-common
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: libgtk-3-0
Conflicts: libgtk3.0-common
Description: common files for the GTK+ graphical user interface library
 GTK+ is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK+ is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the common files which the libraries need.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: python-sip
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: sip4
Version: 4.13.2-1
Provides: python2.7-sip, sip-api-8.0, sip-api-8.1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), libc6 (>= 2.4)
Breaks: python-qscintilla (<< 2.4.3-3~), python-qt4 (<< 4.9~), python-qwt3d-qt4 (<< 0.1.7~cvs20090625-7~), python-qwt5-qt4 (<< 5.2.1~cvs20091107+dfsg-6~)
Description: Python/C++ bindings generator runtime library
 SIP is a tool for generating bindings for C++ classes with some ideas
 borrowed from SWIG, but capable of tighter bindings because of its
 specificity towards C++ and Python.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://www.riverbankcomputing.co.uk/software/sip/

Package: libpolkit-gobject-1-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: policykit-1
Version: 0.104-1ubuntu1.1
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.31.8)
Pre-Depends: multiarch-support
Breaks: libpolkit-agent-1-0 (<< 0.99), libpolkit-backend-1-0 (<< 0.99), libpolkit-gtk-1-0 (<< 0.99), policykit-1 (<< 0.99)
Description: PolicyKit Authorization API
 PolicyKit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 .
 This package contains a library for accessing PolicyKit.
Homepage: http://hal.freedesktop.org/docs/PolicyKit/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libpam-cap
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libcap2
Version: 1:2.22-1ubuntu3
Replaces: libcap2-bin (<< 1:2.22-1ubuntu3)
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libpam0g (>= 0.99.7.1), libpam-runtime (>= 1.1.3-2~)
Breaks: libcap2-bin (<< 1:2.22-1ubuntu3)
Conffiles:
 /etc/security/capability.conf 42907d60c72848d86e61eacf0e9e03d7
Description: PAM module for implementing capabilities
 This package contains the PAM module for enforcing capabilities on users
 and groups at PAM session start time.
Homepage: http://sites.google.com/site/fullycapable/
Original-Maintainer: Torsten Werner <twerner@debian.org>

Package: link-grammar-dictionaries-en
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 1824
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: link-grammar
Version: 4.7.4-2
Description: Carnegie Mellon University's link grammar parser (English dictionary)
 In Selator, D. and Temperly, D. "Parsing English with a Link Grammar"
 (1991), the authors defined a new formal grammatical system called a
 "link grammar". A sequence of words is in the language of a link
 grammar if there is a way to draw "links" between words in such a way
 that the local requirements of each word are satisfied, the links do
 not cross, and the words form a connected graph. The authors encoded
 English grammar into such a system, and wrote this program to parse
 English using this grammar.
 .
 link-grammar can be used for linguistic parsing for information
 retrieval or extraction from natural language documents. It can also be
 used as a grammar checker.
 .
 This package contains the English dictionaries.
Original-Maintainer: Ken Bloom <kbloom@gmail.com>
Homepage: http://www.abisource.com/projects/link-grammar/

Package: libraw1394-11
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libraw1394
Version: 2.0.7-1ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Suggests: libraw1394-doc
Description: library for direct access to IEEE 1394 bus (aka FireWire)
 libraw1394 is the only supported interface to the kernel side raw1394
 of the Linux IEEE-1394 subsystem, which provides direct access to the
 connected 1394 buses to user space.  Through libraw1394/raw1394,
 applications can directly send to and receive from other nodes without
 requiring a kernel driver for the protocol in question.
Homepage: https://ieee1394.wiki.kernel.org/
Original-Maintainer: Guus Sliepen <guus@debian.org>

Package: libots0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ots
Version: 0.5.0-2.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.12.0), libxml2 (>= 2.7.4)
Description: Open Text Summarizer (library)
 OTS reads a text and decides which sentences are important and which
 are not.  Then it creates a short summary or will highlight the main
 idea in the text (the output can be HTML).  OTS is m17n'd and works
 with UTF-8 encoding.
 .
 This package contains shared library and a program (ots).
Original-Maintainer: Masayuki Hatta (mhatta) <mhatta@debian.org>
Homepage: http://libots.sourceforge.net/

Package: shared-mime-info
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 2504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0-0ubuntu4.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.24.0), libxml2 (>= 2.7.4)
Conflicts: libglib2.0-0 (<< 2.17.2), libgnomevfs2-0 (<< 1:2.24.0), tracker (<< 0.6.90)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and XFCE use this database.
Homepage: http://freedesktop.org/wiki/Software/shared-mime-info
Original-Maintainer: Sebastian Dröge <slomo@debian.org>

Package: libt1-5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 369
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: t1lib
Version: 5.1.2-3.4ubuntu1
Depends: libc6 (>= 2.11), libx11-6
Description: Type 1 font rasterizer library - runtime
 T1lib is an enhanced rasterizer for Type 1 fonts.
 .
 T1lib is based on the X11R5 font rasterizer code, but operates independently
 of X11.  It includes many enhancements, including underlining, antialiasing,
 user-defined slant and extension factors, and rotation.
 .
 This package contains the shared libraries needed to run programs using T1lib.
Homepage: ftp://sunsite.unc.edu/pub/Linux/libs/graphics/
Original-Maintainer: Ruben Molina <rmolina@udea.edu.co>

Package: libxdmcp6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxdmcp
Version: 1:1.1.0-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxdmcp6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libxdmcp
Version: 1:1.1.0-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: ubuntu-sso-client-gtk
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 174
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-sso-client
Version: 3.0.2-0ubuntu3
Replaces: ubuntu-sso-client (<< 2.99.4)
Provides: ubuntu-sso-client-gui
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), gir1.2-glib-2.0, gir1.2-gtk-3.0, gir1.2-webkit-3.0, python-ubuntu-sso-client (= 3.0.2-0ubuntu3), ubuntu-sso-client (= 3.0.2-0ubuntu3)
Breaks: ubuntu-sso-client (<< 2.99.4)
Description: Ubuntu Single Sign-On client - GTK+ frontend
 GTK+ frontend to be used by the desktop service to sign into Ubuntu services
 via SSO.
Original-Maintainer: Natalia Bidart <natalia.bidart@ubuntu.com>

Package: xscreensaver-screensaver-bsod
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 524
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xscreensaver
Version: 5.15-2ubuntu1
Replaces: xscreensaver-data-extra (<< 5.10-4)
Depends: libc6 (>= 2.7), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.12.0), libx11-6, libxext6, libxmu6, libxt6, xscreensaver-data-extra
Conflicts: xscreensaver-data-extra (<< 5.10-4)
Description: BSOD hack from XScreenSaver
 This package ships the hack BSOD that shows the popular Blue Screens of Death
 from several OSes including BSD, Windows, Linux, Solaris, Apple and much more.
 .
 WARNING: This screensaver could be confused with a real BSOD and could lead an
 user to reboot the machine with consequences like data loss.
Homepage: http://www.jwz.org/xscreensaver/
Original-Maintainer: Jose Luis Rivas <ghostbar@debian.org>

Package: libjavascriptcoregtk-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3821
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: webkit
Version: 1.8.3-0ubuntu0.12.04.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.2), libicu48 (>= 4.8-1), libstdc++6 (>= 4.1.1)
Description: Javascript engine library for GTK+
 Javascript Core is the javascript engine used in many ports of
 WebKit. This build comes from WebKitGTK+.
Homepage: http://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: libgl1-mesa-dri
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 15582
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: amd64
Source: mesa
Version: 8.0.4-0ubuntu0.7
Replaces: libgl1-mesa-dri-experimental (<< 7.11.1), xlibmesa-dri (<< 1:7.0.0)
Depends: libc6 (>= 2.14), libdrm-intel1 (>= 2.4.27), libdrm-nouveau1a (>= 2.4.23), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.3), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libllvm3.0, libstdc++6 (>= 4.1.1)
Suggests: libglide3
Breaks: libgl1-mesa-dri-experimental (<< 7.11.1), libgl1-mesa-glx (<< 7.10.2-4), libgl1-mesa-glx-no-multiarch, xserver-xorg-core (<< 2:1.10.2-2), xserver-xorg-core-no-multiarch
Conflicts: xlibmesa-dri (<< 1:7.0.0)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libgl1-mesa-swx11 package.
 .
 The tdfx DRI module needs libglide3 to enable direct rendering.
Homepage: http://mesa3d.sourceforge.net/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libgl1-mesa-dri
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 15818
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: i386
Source: mesa
Version: 8.0.4-0ubuntu0.7
Replaces: libgl1-mesa-dri-experimental (<< 7.11.1), xlibmesa-dri (<< 1:7.0.0)
Depends: libc6 (>= 2.4), libdrm-intel1 (>= 2.4.27), libdrm-nouveau1a (>= 2.4.23), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.3), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libllvm3.0, libstdc++6 (>= 4.1.1)
Suggests: libglide3
Breaks: libgl1-mesa-dri-experimental (<< 7.11.1), libgl1-mesa-glx (<< 7.10.2-4), libgl1-mesa-glx-no-multiarch, xserver-xorg-core (<< 2:1.10.2-2), xserver-xorg-core-no-multiarch
Conflicts: xlibmesa-dri (<< 1:7.0.0)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libgl1-mesa-swx11 package.
 .
 The tdfx DRI module needs libglide3 to enable direct rendering.
Homepage: http://mesa3d.sourceforge.net/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: gvfs-bin
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: gnome
Installed-Size: 366
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gvfs
Version: 1.12.1-0ubuntu1.2
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.31.8), gvfs-common (= 1.12.1-0ubuntu1.2)
Suggests: gvfs
Conffiles:
 /etc/bash_completion.d/gvfs-bash-completion.sh c41b12f60a6dc8813518112941a52a65
Description: userspace virtual filesystem - binaries
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the support binaries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: esound-common
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: sound
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: esound
Version: 0.2.41-10build3
Conflicts: libesd-alsa0
Conffiles:
 /etc/esound/esd.conf 22fcad1ca71ba243bdebd9de294a31ba
Description: Enlightened Sound Daemon - Common files
 This program is designed to mix together several digitized
 audio streams for playback by a single device.
 .
 This package contains the documentation and configuration files.
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libnl3
Version: 3.2.3-2ubuntu2
Depends: libc6 (>= 2.14)
Conffiles:
 /etc/libnl-3/pktloc 02e59c3b2bba388ba64b2d120a76bab7
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://people.suug.ch/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <mmind@debian.org>

Package: libsane-hpaio
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: hplip
Version: 3.12.2-1ubuntu3.4
Replaces: hplip (<< 3.10.6-3), hplip-data (<< 3.10.5-4ubuntu1)
Depends: libc6 (>= 2.14), libcups2 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libhpmud0
Recommends: sane-utils, hplip (= 3.12.2-1ubuntu3.4)
Breaks: hplip (<< 3.10.6-3), hplip-data (<< 3.10.5-4ubuntu1)
Conffiles:
 /etc/sane.d/dll.d/hplip 60fc397b1570c0694184588f86d56807
 /etc/hp/hplip.conf c8b6958f15e190254e93fa4a8b4c58d3
Description: HP SANE backend for multi-function peripherals
 This package contains the SANE backend libraries for use with HP
 Multi-function peripherals.
 .
 Users of hplip are advised to install the hplip{-gui} packages for
 command line and GUI tools associated with HPLIP.
 .
 This package is useful for a minimal footprint headless scanning solution.
Homepage: http://hplipopensource.com/hplip-web/index.html
Original-Maintainer: Debian HPIJS and HPLIP maintainers <pkg-hpijs-devel@lists.alioth.debian.org>

Package: ure
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5609
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libreoffice (1:4.3.1~rc2-0ubuntu1~precise1)
Version: 4.3.1~rc2-0ubuntu1~precise1
Replaces: libreoffice-common (<< 1:4.1.2~), libreoffice-java-common (<< 1:3.0.0~dev300m12)
Depends: uno-libs3 (= 4.3.1~rc2-0ubuntu1~precise1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), libxml2 (>= 2.7.4)
Suggests: java5-runtime
Breaks: libreoffice-core (<< 1:4.1.2~), openoffice.org-core (<< 1:3.3~)
Conflicts: cli-uno-bridge (<< 1:3.0.0~dev300m22)
Description: LibreOffice UNO runtime environment
 The Uno Runtime Environment (URE) is the well-known UNO component model
 of LibreOffice, packaged up as an individual product.
 .
 It offers you a flexible, low-overhead component model that is most ideal
 for (but not limited to) combining in one application components written in
 different computer languages, and developed by different parties. You can use
 it to create any kind of application, in whatever application domain you can
 imagine.
Homepage: http://www.libreoffice.org
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>

Package: ruby-gstreamer
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ruby-gnome2
Version: 1.0.3-1build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libgstreamer-plugins-base0.10-0 (>= 0.10.16), libgstreamer0.10-0 (>= 0.10.15), libruby1.8 (>= 1.8.7.352), libruby1.9.1 (>= 1.9.2.0), ruby-gtk2 (= 1.0.3-1build1)
Description: GStreamer bindings for the Ruby language
 GStreamer is a media processing framework with support for a wide variety of
 data sources, sinks, and formats through the use of dynamically loaded
 plugins. This package contains libraries for using GStreamer with the Ruby
 programming language.
Original-Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: http://ruby-gnome2.sourceforge.jp/

Package: xfce4-cpugraph-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 574
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.5-0ubuntu1~ppa1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.12.0), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), xfce4-panel (>= 4.9.2)
Description: CPU load graph plugin for the Xfce4 panel
 The CPU graph plugin displays a graph of your latest system load.
Homepage: http://goodies.xfce.org/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: coreutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 5496
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.13-3ubuntu3.2
Replaces: mktemp, timeout
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libacl1 (>= 2.2.51-5), libattr1 (>= 1:2.4.46-5), libc6 (>= 2.15), libselinux1 (>= 1.32)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc od
 paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon
 sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test
 timeout touch tr true truncate tsort tty uname unexpand uniq unlink
 users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: libmtp-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 819
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libmtp
Version: 1.1.3-1ubuntu0.1
Replaces: libmtp8
Breaks: libmtp8 (<= 1.0.6-6)
Description: Media Transfer Protocol (MTP) common files
 libmtp is a library for communicating with MTP aware devices in POSIX
 compliant operating systems.  It implements MTP Basic, the subset
 proposed for standardization.
 .
 The Media Transfer Protocol (commonly referred to as MTP) is a devised
 set of custom extensions to support the transfer of music files on
 USB digital audio players and movie files on USB portable media players.
 .
 This package provides the udev rules file and the FreeDesktop.org Device
 Information Files file (used by HAL).
Original-Maintainer: Alessio Treglia <alessio@debian.org>
Homepage: http://libmtp.sourceforge.net/

Package: libsane
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 8438
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: sane-backends
Version: 1.0.22-7ubuntu1
Replaces: libsane-extras (<< 1.0.18.14)
Depends: adduser (>= 3.47), libsane-common (= 1.0.22-7ubuntu1), udev (>= 0.88-1), acl (>= 2.2.49-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.11), libgphoto2-2 (>= 2.4.10.1), libgphoto2-port0 (>= 2.4.10.1), libieee1284-3, libjpeg8 (>= 8c), libtiff4, libusb-0.1-4 (>= 2:0.1.12), libv4l-0 (>= 0.5.0)
Pre-Depends: multiarch-support
Suggests: avahi-daemon, hpoj, hplip, libsane-extras (>= 1.0.22.1), sane-utils (>= 1.0.22-7ubuntu1)
Conffiles:
 /etc/sane.d/abaton.conf 51591e7ab98851effab49089323cb160
 /etc/sane.d/agfafocus.conf f763f1f31d26507986aad58ca02f79f9
 /etc/sane.d/apple.conf 602eda3ecedd81ef751d9241becb9142
 /etc/sane.d/artec.conf 1b87eeb6069e6f5ac7b5f0cc4bf48083
 /etc/sane.d/artec_eplus48u.conf 3672fe16e6b14a124ad74acd47941be9
 /etc/sane.d/avision.conf 51e9f41665cca34d58ceb8bcf2ed072f
 /etc/sane.d/bh.conf ed8e137983ae58a7bf038180b29737bd
 /etc/sane.d/canon.conf 099d16dab225eaa121f1ba2f3af9f60a
 /etc/sane.d/canon630u.conf 5fae93df3328f1915e3d26f77a8c3b9d
 /etc/sane.d/canon_dr.conf c5b4e2008dba36c4a9df50f7e89fb65a
 /etc/sane.d/canon_pp.conf 2ecfac7c883bc980aba880f424abb8ad
 /etc/sane.d/cardscan.conf c53b0f155e8abb0e35da6e4bd9898e41
 /etc/sane.d/coolscan.conf b5a49230bc9b80a4358d966255d4697a
 /etc/sane.d/coolscan2.conf e9039d4f201acacca70e8964ec22ee70
 /etc/sane.d/coolscan3.conf dc124184659f6acfcb2f77d4759adc8c
 /etc/sane.d/dc25.conf 0659d0dee2b39c585b6ebc682af0dbd9
 /etc/sane.d/dc210.conf 821754802fb212acc9f48c7dd93ddaa1
 /etc/sane.d/dc240.conf 821754802fb212acc9f48c7dd93ddaa1
 /etc/sane.d/dell1600n_net.conf ce26ec480900a2420d14d5f2c43f07eb
 /etc/sane.d/dmc.conf 0731b2373c97cc98c5c42dd56e7fb05c
 /etc/sane.d/epjitsu.conf 54ce52e76e2c5279e4c12830a74ea5a0
 /etc/sane.d/epson.conf 318ed78f38b29c99e478cbc7efc8ff14
 /etc/sane.d/epson2.conf fb0befe1041db6a1b6a0813c0c8fcf1c
 /etc/sane.d/fujitsu.conf d267daa8e7ca4b0abb74dfce0fd7a39b
 /etc/sane.d/genesys.conf 483aafcb59214ab8f83763e5122ad9a4
 /etc/sane.d/gphoto2.conf ca55d23d02774d6eea321dcbd4099e5e
 /etc/sane.d/gt68xx.conf 9a0e100ef0a0c5c6860575905b5cd1b0
 /etc/sane.d/hp.conf 5328dfe188ece714bf9fdb7e26dc9d00
 /etc/sane.d/hp3900.conf 9d5532c21c759657347de8b26629cf13
 /etc/sane.d/hp4200.conf 0656916d9805c3af1f81424354082501
 /etc/sane.d/hp5400.conf 25848f289fb76aeb7f78e29ab323dbf8
 /etc/sane.d/hpsj5s.conf 0e969889a4509e62ef352a0222d2620e
 /etc/sane.d/hs2p.conf a7b07bd2a66b8a562ccb64da03bd47da
 /etc/sane.d/ibm.conf d5eab60adbaf729bb5bf781fc4c5409d
 /etc/sane.d/kodak.conf 63774fc2dd277fbfc54b4a8f7ea4528d
 /etc/sane.d/leo.conf 008b9b3cad3c7073aa5331a453e68cd6
 /etc/sane.d/lexmark.conf f5d92658f9dc0eb540ddc9d24fe3ffb1
 /etc/sane.d/ma1509.conf 73a9fd7af5924e04054f43e2708f5059
 /etc/sane.d/magicolor.conf 1e34b81727b36c9269d413cb6d20b2e6
 /etc/sane.d/matsushita.conf fe9a8941cd52c7e012724122d67a98e6
 /etc/sane.d/microtek.conf 940c8db7e01ccaa6f2c5be2ca020ddf1
 /etc/sane.d/microtek2.conf 75cb498c51441db57932a4895f7f0d96
 /etc/sane.d/mustek.conf 33284fd785df74d394b9e30a4ec8283e
 /etc/sane.d/mustek_pp.conf c9d10da50e4b77dcc73b97f67a81a89a
 /etc/sane.d/mustek_usb.conf f4080c5eacaf30b4ed871a5330960696
 /etc/sane.d/nec.conf 5eed67a9759c991553fa3055af023a33
 /etc/sane.d/net.conf 9e5860565491b3157e3c6e0af682b7a2
 /etc/sane.d/pie.conf 7bdb319bd61b19389e93ed85a1ed85d1
 /etc/sane.d/pixma.conf da98f7eae73240333304d1dafe58e19a
 /etc/sane.d/plustek.conf f329323c5ed857873510e38233f1afcf
 /etc/sane.d/plustek_pp.conf 327941a5240e699e3251d74192f4f299
 /etc/sane.d/qcam.conf 7a30e22cd391b7992646723df280f4fe
 /etc/sane.d/ricoh.conf b1891143384a7308ec17d9e6ac836201
 /etc/sane.d/rts8891.conf 3446a737f83b38c3b576d5bf2e5161ec
 /etc/sane.d/s9036.conf 5eed67a9759c991553fa3055af023a33
 /etc/sane.d/sceptre.conf 9d7e8954714b47042b849ddbd2530973
 /etc/sane.d/sharp.conf d16cb589cdceb30d4523334063ddf040
 /etc/sane.d/sm3840.conf 9b61359cbcc14b9be4d687b80b772bea
 /etc/sane.d/snapscan.conf b349efcbcec257f5fca8372f1e47e7e0
 /etc/sane.d/sp15c.conf 74fd71c4ea2c8c58bbaa2cecfee56f7c
 /etc/sane.d/st400.conf febd1d7966858a4a0352a2fe2c1abfa0
 /etc/sane.d/stv680.conf 1a5a8d37f0de964bab25b3908fa907d5
 /etc/sane.d/tamarack.conf 93b1a500916dcfabd8a1c288029a5502
 /etc/sane.d/teco1.conf 7976c7a3dd90fe100f30a23a29aaea89
 /etc/sane.d/teco2.conf 1f873f79332e99cb0cd2b9eba938ac3b
 /etc/sane.d/teco3.conf 7b632784a85ec6ead7d26e8fd195dea5
 /etc/sane.d/test.conf eaccee9d3fb610a691705ddf94b9ec11
 /etc/sane.d/u12.conf 9ab31cd28e79474973fc02ccf1c06b99
 /etc/sane.d/umax.conf 5bcadfd7842926832de6d6e29d23558d
 /etc/sane.d/umax_pp.conf d7cdbfd65fc59cfc71ab5f00a3697aaf
 /etc/sane.d/umax1220u.conf 2d36f1f6c15bbfeaf2049d59dcfefe05
 /etc/sane.d/v4l.conf 320fb7603d3c28977ab99a75ba5c54ef
 /etc/sane.d/xerox_mfp.conf fcb95b28145a79acaa07ca12eae1ab50
 /etc/sane.d/p5.conf 27277daf6f7ed1f21de8c6a59d5b9488
 /etc/sane.d/dll.conf 5ddf7634f40a0af1c38e8f85bcfe12eb
Description: API library for scanners
 SANE stands for "Scanner Access Now Easy" and is an application
 programming interface (API) that provides standardized access to any
 raster image scanner hardware (flatbed scanner, hand-held scanner,
 video- and still-cameras, frame-grabbers, etc.). The SANE standard is
 free and its discussion and development are open to everybody. The
 current source code is written to support several operating systems,
 including GNU/Linux, OS/2, Win32 and various Unices and is available
 under the GNU General Public License (commercial applications and
 backends are welcome, too, however).
 .
 This package includes the backends for many scanners. A libsane-extras
 package containing some not-yet-included backends is available separately.
 .
 Graphical frontends for sane are available in the packages sane and
 xsane. Command line frontend scanimage, saned and sane-find-scanner are
 available in the sane-utils package.
Homepage: http://www.sane-project.org
Original-Maintainer: Julien BLACHE <jblache@debian.org>

Package: libsane
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 8304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: sane-backends
Version: 1.0.22-7ubuntu1
Replaces: libsane-extras (<< 1.0.18.14)
Depends: adduser (>= 3.47), libsane-common (= 1.0.22-7ubuntu1), udev (>= 0.88-1), acl (>= 2.2.49-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.11), libgphoto2-2 (>= 2.4.10.1), libgphoto2-port0 (>= 2.4.10.1), libieee1284-3, libjpeg8 (>= 8c), libtiff4, libusb-0.1-4 (>= 2:0.1.12), libv4l-0 (>= 0.5.0)
Pre-Depends: multiarch-support
Suggests: avahi-daemon, hpoj, hplip, libsane-extras (>= 1.0.22.1), sane-utils (>= 1.0.22-7ubuntu1)
Conffiles:
 /etc/sane.d/abaton.conf 51591e7ab98851effab49089323cb160
 /etc/sane.d/agfafocus.conf f763f1f31d26507986aad58ca02f79f9
 /etc/sane.d/apple.conf 602eda3ecedd81ef751d9241becb9142
 /etc/sane.d/artec.conf 1b87eeb6069e6f5ac7b5f0cc4bf48083
 /etc/sane.d/artec_eplus48u.conf 3672fe16e6b14a124ad74acd47941be9
 /etc/sane.d/avision.conf 51e9f41665cca34d58ceb8bcf2ed072f
 /etc/sane.d/bh.conf ed8e137983ae58a7bf038180b29737bd
 /etc/sane.d/canon.conf 099d16dab225eaa121f1ba2f3af9f60a
 /etc/sane.d/canon630u.conf 5fae93df3328f1915e3d26f77a8c3b9d
 /etc/sane.d/canon_dr.conf c5b4e2008dba36c4a9df50f7e89fb65a
 /etc/sane.d/canon_pp.conf 2ecfac7c883bc980aba880f424abb8ad
 /etc/sane.d/cardscan.conf c53b0f155e8abb0e35da6e4bd9898e41
 /etc/sane.d/coolscan.conf b5a49230bc9b80a4358d966255d4697a
 /etc/sane.d/coolscan2.conf e9039d4f201acacca70e8964ec22ee70
 /etc/sane.d/coolscan3.conf dc124184659f6acfcb2f77d4759adc8c
 /etc/sane.d/dc25.conf 0659d0dee2b39c585b6ebc682af0dbd9
 /etc/sane.d/dc210.conf 821754802fb212acc9f48c7dd93ddaa1
 /etc/sane.d/dc240.conf 821754802fb212acc9f48c7dd93ddaa1
 /etc/sane.d/dell1600n_net.conf ce26ec480900a2420d14d5f2c43f07eb
 /etc/sane.d/dmc.conf 0731b2373c97cc98c5c42dd56e7fb05c
 /etc/sane.d/epjitsu.conf 54ce52e76e2c5279e4c12830a74ea5a0
 /etc/sane.d/epson.conf 318ed78f38b29c99e478cbc7efc8ff14
 /etc/sane.d/epson2.conf fb0befe1041db6a1b6a0813c0c8fcf1c
 /etc/sane.d/fujitsu.conf d267daa8e7ca4b0abb74dfce0fd7a39b
 /etc/sane.d/genesys.conf 483aafcb59214ab8f83763e5122ad9a4
 /etc/sane.d/gphoto2.conf ca55d23d02774d6eea321dcbd4099e5e
 /etc/sane.d/gt68xx.conf 9a0e100ef0a0c5c6860575905b5cd1b0
 /etc/sane.d/hp.conf 5328dfe188ece714bf9fdb7e26dc9d00
 /etc/sane.d/hp3900.conf 9d5532c21c759657347de8b26629cf13
 /etc/sane.d/hp4200.conf 0656916d9805c3af1f81424354082501
 /etc/sane.d/hp5400.conf 25848f289fb76aeb7f78e29ab323dbf8
 /etc/sane.d/hpsj5s.conf 0e969889a4509e62ef352a0222d2620e
 /etc/sane.d/hs2p.conf a7b07bd2a66b8a562ccb64da03bd47da
 /etc/sane.d/ibm.conf d5eab60adbaf729bb5bf781fc4c5409d
 /etc/sane.d/kodak.conf 63774fc2dd277fbfc54b4a8f7ea4528d
 /etc/sane.d/leo.conf 008b9b3cad3c7073aa5331a453e68cd6
 /etc/sane.d/lexmark.conf f5d92658f9dc0eb540ddc9d24fe3ffb1
 /etc/sane.d/ma1509.conf 73a9fd7af5924e04054f43e2708f5059
 /etc/sane.d/magicolor.conf 1e34b81727b36c9269d413cb6d20b2e6
 /etc/sane.d/matsushita.conf fe9a8941cd52c7e012724122d67a98e6
 /etc/sane.d/microtek.conf 940c8db7e01ccaa6f2c5be2ca020ddf1
 /etc/sane.d/microtek2.conf 75cb498c51441db57932a4895f7f0d96
 /etc/sane.d/mustek.conf 33284fd785df74d394b9e30a4ec8283e
 /etc/sane.d/mustek_pp.conf c9d10da50e4b77dcc73b97f67a81a89a
 /etc/sane.d/mustek_usb.conf f4080c5eacaf30b4ed871a5330960696
 /etc/sane.d/nec.conf 5eed67a9759c991553fa3055af023a33
 /etc/sane.d/net.conf 9e5860565491b3157e3c6e0af682b7a2
 /etc/sane.d/pie.conf 7bdb319bd61b19389e93ed85a1ed85d1
 /etc/sane.d/pixma.conf da98f7eae73240333304d1dafe58e19a
 /etc/sane.d/plustek.conf f329323c5ed857873510e38233f1afcf
 /etc/sane.d/plustek_pp.conf 327941a5240e699e3251d74192f4f299
 /etc/sane.d/qcam.conf 7a30e22cd391b7992646723df280f4fe
 /etc/sane.d/ricoh.conf b1891143384a7308ec17d9e6ac836201
 /etc/sane.d/rts8891.conf 3446a737f83b38c3b576d5bf2e5161ec
 /etc/sane.d/s9036.conf 5eed67a9759c991553fa3055af023a33
 /etc/sane.d/sceptre.conf 9d7e8954714b47042b849ddbd2530973
 /etc/sane.d/sharp.conf d16cb589cdceb30d4523334063ddf040
 /etc/sane.d/sm3840.conf 9b61359cbcc14b9be4d687b80b772bea
 /etc/sane.d/snapscan.conf b349efcbcec257f5fca8372f1e47e7e0
 /etc/sane.d/sp15c.conf 74fd71c4ea2c8c58bbaa2cecfee56f7c
 /etc/sane.d/st400.conf febd1d7966858a4a0352a2fe2c1abfa0
 /etc/sane.d/stv680.conf 1a5a8d37f0de964bab25b3908fa907d5
 /etc/sane.d/tamarack.conf 93b1a500916dcfabd8a1c288029a5502
 /etc/sane.d/teco1.conf 7976c7a3dd90fe100f30a23a29aaea89
 /etc/sane.d/teco2.conf 1f873f79332e99cb0cd2b9eba938ac3b
 /etc/sane.d/teco3.conf 7b632784a85ec6ead7d26e8fd195dea5
 /etc/sane.d/test.conf eaccee9d3fb610a691705ddf94b9ec11
 /etc/sane.d/u12.conf 9ab31cd28e79474973fc02ccf1c06b99
 /etc/sane.d/umax.conf 5bcadfd7842926832de6d6e29d23558d
 /etc/sane.d/umax_pp.conf d7cdbfd65fc59cfc71ab5f00a3697aaf
 /etc/sane.d/umax1220u.conf 2d36f1f6c15bbfeaf2049d59dcfefe05
 /etc/sane.d/v4l.conf 320fb7603d3c28977ab99a75ba5c54ef
 /etc/sane.d/xerox_mfp.conf fcb95b28145a79acaa07ca12eae1ab50
 /etc/sane.d/p5.conf 27277daf6f7ed1f21de8c6a59d5b9488
 /etc/sane.d/dll.conf 5ddf7634f40a0af1c38e8f85bcfe12eb
Description: API library for scanners
 SANE stands for "Scanner Access Now Easy" and is an application
 programming interface (API) that provides standardized access to any
 raster image scanner hardware (flatbed scanner, hand-held scanner,
 video- and still-cameras, frame-grabbers, etc.). The SANE standard is
 free and its discussion and development are open to everybody. The
 current source code is written to support several operating systems,
 including GNU/Linux, OS/2, Win32 and various Unices and is available
 under the GNU General Public License (commercial applications and
 backends are welcome, too, however).
 .
 This package includes the backends for many scanners. A libsane-extras
 package containing some not-yet-included backends is available separately.
 .
 Graphical frontends for sane are available in the packages sane and
 xsane. Command line frontend scanimage, saned and sane-find-scanner are
 available in the sane-utils package.
Homepage: http://www.sane-project.org
Original-Maintainer: Julien BLACHE <jblache@debian.org>

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 996
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.8.3p1-1ubuntu3.6
Replaces: sudo-ldap
Depends: libc6 (>= 2.15), libpam0g (>= 0.99.7.1), libpam-modules
Conflicts: sudo-ldap
Conffiles:
 /etc/pam.d/sudo 665a6dead44ff792cfad6b0faa10a621
 /etc/init.d/sudo f6235653501c2f4994660ebb4fe6306e
 /etc/sudoers.d/README 0b76d590c3d5d1966bdfa7ee808893c4
 /etc/sudoers 1b00ee0a97a1bcf9961e476140e2c5c1
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libfreetype6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 811
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: freetype
Version: 2.4.8-1ubuntu2.1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libfreetype6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 798
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: freetype
Version: 2.4.8-1ubuntu2.1
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: debianutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2.1ubuntu2
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel run-parts
 savelog tempfile which.
Original-Maintainer: Clint Adams <clint@debian.org>

Package: printer-driver-pxljr
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pxljr
Version: 1.3+repack0-2
Replaces: pxljr (<< 1.3+repack0-2~)
Depends: libc6 (>= 2.14), libijs-0.35 (>= 0.35), libjpeg8 (>= 8c), python, xz-utils, foomatic-filters (>= 4.0.0~bzr156)
Breaks: pxljr (<< 1.3+repack0-2~)
Description: printer driver for HP Color LaserJet 35xx/36xx
 HP's Color LaserJets 35xx and 36xx are supported by HP's HPIJS driver
 (part of HPLIP), but HPIJS supports only the lowest quality level of
 the three which are available under Windows. This driver which is not
 developed at HP but by a independent developer supports all modes and
 so provides the highest printout quality for these printers.
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Homepage: http://sourceforge.net/projects/hp-pxl-jetready/

Package: libsysfs2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 108
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: amd64
Source: sysfsutils
Version: 2.1.0+repack-1
Depends: libc6 (>= 2.4)
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 The package sysfsutils contains frontend programs that use this
 library. Development files and C examples are provided by the package
 libsysfs-dev.
Original-Maintainer: Martin Pitt <mpitt@debian.org>

Package: xfonts-mathml
Status: install ok installed
Priority: extra
Section: fonts
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4ubuntu1
Depends: xfonts-utils
Suggests: otf-stix, ttf-lyx
Conffiles:
 /etc/X11/fonts/Type1/xfonts-mathml.scale 3928791fa92cf3bd6597c3fe224379c6
Description: Type1 Symbol font for MathML
 To display web pages containing MathML equations properly with
 MathML-enabled browsers, you will need STIX fonts, TeX's Computer
 Modern fonts, Type1 'Symbol' font and (possibly) some other fonts
 installed on your computer.
 .
 This package provides Type1 Symbol font which is modified from
 s050000l.pfb of gsfonts with FontForge.
 .
 You will also need to install the packages: otf-stix (STIX fonts)
 and ttf-lyx (TeX's Computer Modern fonts) to view MathML properly.
Original-Maintainer: Atsuhito KOHDA <kohda@debian.org>

Package: fonts-tlwg-typo
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 461
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: fonts-tlwg
Version: 1:0.4.17-1ubuntu1
Replaces: ttf-thai-tlwg (<< 1:0.4.16)
Breaks: ttf-thai-tlwg (<< 1:0.4.16)
Conffiles:
 /etc/fonts/conf.avail/64-21-tlwg-typo.conf 396842585f4a8be14ddf96ab1d783921
Description: Thai TlwgTypo font
 This package provides Thai TlwgTypo monospace font from TLWG.
 .
 The font provides Thai purely monospace font, i.e. all glyphs are of the
 same width, even for combining characters, but with some rules in the font
 to combine them to base characters.
 .
 The glyph shapes are designed to look like Thai electric typewriters.
Homepage: http://linux.thai.net/projects/thaifonts-scalable
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: openprinting-ppds
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 3183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: foomatic-db
Version: 20120322-0ubuntu1
Replaces: linuxprinting.org-ppds, openprinting-ppds-extra (<< 20100806-0ubuntu6)
Provides: linuxprinting.org-ppds, openprinting-ppds-extra
Depends: python, xz-utils
Recommends: foomatic-filters, cups, cups-client
Suggests: hpijs-ppds
Breaks: cups (<< 1.5.0-3~)
Conflicts: linuxprinting.org-ppds, openprinting-ppds-extra (<< 20100806-0ubuntu6)
Description: OpenPrinting printer support - PostScript PPD files
 This package includes a collection of free PostScript Printer Description
 files for PostScript (and clone) printers from various manufacturers, as
 distributed by OpenPrinting.
 .
 If you have non-PostScript printers, the foomatic-db-compressed-ppds (or
 foomatic-db and foomatic-db-engine), hplip, gutenprint, splix, foo2zjs,
 pxljr, min12xxw, and m2300w packages are the ones you need; this package
 won't be of much help to you.
 .
 Some manufacturers distribute PPD files for their printers under
 non-free licenses; those are not included in this package, but may be
 available from the manufacturer's website, included on a CD or
 other media with the printer, or downloadable from the OpenPrinting
 web site (even automatically if the printer setup tool supports it).
Original-Maintainer: Debian Printing Group <debian-printing@lists.debian.org>
Homepage: http://www.openprinting.org/

Package: pulseaudio-module-x11
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 160
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pulseaudio
Version: 1:1.1-0ubuntu15.4
Depends: libc6 (>= 2.4), libice6 (>= 1:1.0.0), libpulse0 (>= 1:1.1-0ubuntu15.4), libsm6, libx11-6, libxcb1, libxtst6, pulseaudio, pulseaudio-utils
Description: X11 module for PulseAudio sound server
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. There is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.
Homepage: http://www.pulseaudio.org
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>

Package: hyphen-fr
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libreoffice-dictionaries
Version: 1:4.2.1-0ubuntu1~trusty1
Replaces: openoffice.org-hyphenation-fr (<< 1:3.3.0-7)
Provides: hyphen-hyphenation-patterns, hyphen-hyphenation-patterns-fr, openoffice.org-hyphenation-fr
Depends: dictionaries-common (>= 0.10) | openoffice.org-updatedicts
Recommends: libreoffice-writer | openoffice.org-writer
Conflicts: openoffice.org-hyphenation-fr (<< 1:3.3.0-7)
Description: French hyphenation patterns for LibreOffice
 This package contains the French hyphenation patterns for
 LibreOffice
Original-Maintainer: Debian OpenOffice Team <debian-openoffice@lists.debian.org>

Package: language-pack-fr-base
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 9922
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:12.04+20140106
Replaces: language-pack-fr (<< 1:12.04+20140106), language-pack-fr-base (<< 1:12.04+20140106), language-pack-gnome-fr (<< 1:12.04+20140106), language-pack-gnome-fr-base (<< 1:12.04+20140106), language-pack-kde-fr (<< 1:12.04+20140106), language-pack-kde-fr-base (<< 1:12.04+20140106)
Depends: locales (>= 2.3.6), language-pack-fr (>= 1:12.04+20140106)
Pre-Depends: dpkg (>= 1.10.27ubuntu1)
Recommends: firefox-locale-fr
Conflicts: language-pack-fr (<< 1:12.04+20140106)
Description: translations for language French
 Translation data for all supported packages for:
 French
 .
 This package provides the bulk of translation data and is updated
 only seldom. language-pack-fr provides frequent
 translation updates, so you should install this as well.

Package: libwxgtk2.8-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 10005
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: wxwidgets2.8
Version: 2.8.12.1-6ubuntu2
Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libgl1-mesa-glx | libgl1, libglib2.0-0 (>= 2.24.0), libgstreamer-plugins-base0.10-0 (>= 0.10.0), libgstreamer0.10-0 (>= 0.10.0), libgtk2.0-0 (>= 2.24.0), libjpeg8 (>= 8c), libpango1.0-0 (>= 1.14.0), libpng12-0 (>= 1.2.13-4), libsm6, libstdc++6 (>= 4.1.1), libtiff4, libwxbase2.8-0 (>= 2.8.12.1), libxinerama1
Pre-Depends: multiarch-support
Suggests: libgnomeprintui2.2-0
Description: wxWidgets Cross-platform C++ GUI toolkit (GTK+ runtime)
 wxWidgets (formerly known as wxWindows) is a class library for C++ providing
 GUI components and other facilities on several popular platforms (and some
 unpopular ones as well).  For more information see http://wxwidgets.org
 .
 This package provides the shared libraries needed to run programs linked
 against wxWidgets.  To use the (optional) glcanvas library you will need
 to have Mesa or OpenGL installed.
Homepage: http://www.wxwidgets.org/
Original-Maintainer: wxWidgets Maintainers <freewx-maint@lists.alioth.debian.org>

Package: libxcb-shm0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxcb
Version: 1.8.1-1ubuntu0.2
Depends: libc6 (>= 2.2.5), libxcb1
Pre-Depends: multiarch-support
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org
Original-Maintainer: XCB Developers <xcb@lists.freedesktop.org>

Package: libxcb-shm0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libxcb
Version: 1.8.1-1ubuntu0.2
Depends: libc6 (>= 2.1.3), libxcb1
Pre-Depends: multiarch-support
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org
Original-Maintainer: XCB Developers <xcb@lists.freedesktop.org>

Package: libxml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 585
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.41-1build1
Depends: perl (>= 5.14.2-3build1), perlapi-5.14.2, liburi-perl, libwww-perl, libc6 (>= 2.4), libexpat1 (>= 1.95.8)
Description: Perl module for parsing XML files
 XML::Parser module provides ways to parse XML documents.  It is built on top
 of XML::Parser::Expat, which is a lower level interface to James
 Clark's expat library.  Each call to one of the parsing methods
 creates a new instance of XML::Parser::Expat which is then used to
 parse the document.  Expat options may be provided when the
 XML::Parser object is created.  These options are then passed on to
 the Expat object on each parse call.  They can also be given as extra
 arguments to the parse methods, in which case they override options
 given at XML::Parser creation time.
 .
 The behavior of the parser is controlled either by Style and/or
 Handlers options, or by setHandlers method.  These all provide
 mechanisms for XML::Parser to set the handlers needed by
 XML::Parser::Expat.  If neither Style nor Handlers are specified,
 then parsing just checks the document for being well-formed.
 .
 When underlying handlers get called, they receive as their first
 parameter the Expat object, not the Parser object.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://www.libexpat.org/

Package: libgtk2-trayicon-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.06-1build2
Depends: perl (>= 5.14.2-3build1), perlapi-5.14.2, libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.8.0), libglib-perl (>= 1.00), libgtk2-perl (>= 1.00)
Description: Perl interface to fill the system tray
 libgtk2-trayicon-perl allows a Perl developer to embed an arbitrary
 widget in a System Tray like the GNOME notification area.
 .
 The system tray is an area on the dock or panel used to display unobtrusive
 notifications to the user. The tray contains small icons for each
 notification facility, and the icons can pop up "balloon messages."
 .
 This module is part of gtk2-perl.
 .
 To discuss gtk2-perl, ask questions and flame/praise the authors,
 join gtk-perl-list@gnome.org at lists.gnome.org.
 .
 Also have a look at the gtk2-perl website and sourceforge project page,
 http://gtk2-perl.sourceforge.net
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://gtk2-perl.sourceforge.net/

Package: libclass-accessor-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.34-1
Depends: perl, libsub-name-perl
Description: Perl module that automatically generates accessors
 Class::Accessor automagically generates accessor/mutator methods for your
 class. Most of the time, writing accessors is an exercise in cutting and
 pasting. If you make your module a subclass of Class::Accessor and declare
 your accessor fields with mk_accessors() then you will find yourself with a
 set of automatically generated accessors which can even be customized.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/Class-Accessor/

Package: libxmuu1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxmu
Version: 2:1.1.0-3
Depends: libc6 (>= 2.4), libx11-6
Pre-Depends: multiarch-support
Description: X11 miscellaneous micro-utility library
 libXmuu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  It is a lighter version of libXmu that does not depend
 on libXt or libXext; for more information on libXmu, see libxmu6.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: gir1.2-gconf-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 394
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: gconf
Version: 3.2.5-0ubuntu2
Depends: gconf-service, gir1.2-glib-2.0, libgconf-2-4 (>= 2.31.1)
Conflicts: gir1.0-gconf-2.0
Description: GNOME configuration database system (GObject-Introspection)
 GConf is a configuration database system for storing application
 preferences. It supports default or mandatory settings set by the
 administrator, and changes to the database are instantly applied to all
 running applications. It is written for the GNOME desktop but doesn't
 require it.
 .
 This package contains introspection data for GConf. It can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: http://projects.gnome.org/gconf/
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: libcelt0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: celt
Version: 0.7.1-1
Depends: libc6 (>= 2.4)
Description: The CELT codec runtime library
 CELT is an experimental audio codec for use in low-delay communication.
 .
 CELT stands for "Code-Excited Lapped Transform". It applies some of the CELP
 principles, but does everything in the frequency domain, which removes some of
 the limitations of CELP. CELT is suitable for both speech and music and
 currently features:
 .
  * Ultra-low latency (typically from 3 to 9 ms)
  * Full audio bandwidth (44.1 kHz and 48 kHz)
  * Stereo support
  * Packet loss concealment
  * Constant bit-rates from 32 kbps to 128 kbps and above
  * A fixed-point version of the encoder and decoder
 .
 The CELT codec is meant to close the gap between Vorbis and Speex for
 applications where both high quality audio and low delay are desired.
 .
 This package provides the celt runtime library.
Original-Maintainer: Ron Lee <ron@debian.org>
Homepage: http://www.celt-codec.org

Package: gdb
Status: install ok installed
Multi-Arch: allowed
Priority: optional
Section: devel
Installed-Size: 6537
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 7.4-2012.04-0ubuntu2.1
Depends: libc6 (>= 2.14), libexpat1 (>= 1.95.8), libncurses5 (>= 5.5-5~), libpython2.7 (>= 2.7), libreadline6 (>= 6.0), libtinfo5, zlib1g (>= 1:1.2.0)
Suggests: gdb-doc, gdbserver
Conffiles:
 /etc/gdb/gdbinit e030dc891a3af1f7779429b5c0554c98
Description: The GNU Debugger
 GDB is a source-level debugger, capable of breaking programs at
 any specific line, displaying variable values, and determining
 where errors occurred. Currently, it works for C, C++, Fortran,
 Modula 2 and Java programs. A must-have for any serious
 programmer.
Original-Maintainer: Daniel Jacobowitz <dan@debian.org>

Package: menu
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1759
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.1.46ubuntu1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), dpkg (>= 1.15.4) | install-info
Suggests: menu-l10n, gksu | kdebase-bin | kdebase-runtime | ktsuss | sux
Conffiles:
 /etc/menu-methods/translate_menus cd5d8b532c04f9737d6e8a4a8acf0138
 /etc/menu-methods/menu.h 8009b9c0d517812b2398e59dab7e2fd6
 /etc/menu-methods/lang.h f5dbcc2e7f571d001976d0511f3167a4
 /etc/menu-methods/menu.config ae6ec52278a5f4abf37db7f9955069ec
 /etc/su-to-rootrc f8de61c5fd70720848458facd056ca29
Description: generates programs menu for all menu-aware applications
 Debian menu keeps transparently the menus in the different
 window-managers in sync with the list of installed programs.
 .
 Debian menu relies on a list of menu entries provided by programs
 and a list of menu-methods provided by window-managers and other
 menu-aware applications.
 .
 Menu provides system-level and user-level configuration and overrides
 for both menu entries and menu-methods.
Original-Maintainer: Bill Allombert <ballombe@debian.org>

Package: python-twisted-bin
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: twisted
Version: 11.1.0-1ubuntu2
Replaces: python2.3-twisted-bin, python2.4-twisted-bin
Provides: python2.7-twisted-bin
Depends: python2.7, python (>= 2.7), python (<< 2.8), libc6 (>= 2.3.2)
Suggests: python-twisted-bin-dbg
Conflicts: python2.3-twisted-bin, python2.4-twisted-bin
Description: Event-based framework for internet applications
 It includes a web server, a telnet server, a multiplayer RPG engine, a
 generic client and server for remote object access, and APIs for creating
 new protocols.
Original-Maintainer: Matthias Klose <doko@debian.org>
Python-Version: 2.7

Package: plymouth-theme-xubuntu-logo
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 720
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: all
Source: xubuntu-artwork
Version: 12.04.11
Replaces: xubuntu-plymouth-theme
Provides: plymouth-theme
Depends: plymouth, plymouth-label
Description: graphical boot animation and logger - xubuntu-logo theme
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.
 .
 This package contains the default xubuntu-logo theme.

Package: libprotobuf7
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 1000
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: protobuf
Version: 2.4.1-1ubuntu2
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.3), zlib1g (>= 1:1.1.4)
Description: protocol buffers C++ library
 Protocol buffers are a flexible, efficient, automated mechanism for
 serializing structured data - similar to XML, but smaller, faster, and
 simpler. You define how you want your data to be structured once, then you can
 use special generated source code to easily write and read your structured
 data to and from a variety of data streams and using a variety of languages.
 You can even update your data structure without breaking deployed programs
 that are compiled against the "old" format.
 .
 Google uses Protocol Buffers for almost all of its internal RPC protocols and
 file formats.
 .
 This package contains the runtime library needed for C++ applications.
Homepage: http://code.google.com/p/protobuf/
Original-Maintainer: Iustin Pop <iustin@debian.org>

Package: initramfs-tools
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 363
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Version: 0.99ubuntu13.5
Provides: linux-initramfs-tool
Depends: initramfs-tools-bin (>= 0.99ubuntu13.5), initramfs-tools-bin (<< 0.99ubuntu13.5.1~), klibc-utils (>= 1.5.9-1), busybox-initramfs (>= 1:1.13.3-1ubuntu5), cpio, module-init-tools, udev (>= 147~-5), findutils (>= 4.2.24), util-linux (>> 2.15~rc1)
Suggests: bash-completion
Breaks: cryptsetup (<< 2:1.1.0-2.1), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), mountall (<< 2.0~), s390-tools (<< 1.8.3-2~)
Conflicts: usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 8801535d9bec98754eea6a172f956d42
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1
 /etc/kernel/postinst.d/initramfs-tools fe7713b9a74a10ed71d1e7dd93afc209
 /etc/kernel/postrm.d/initramfs-tools e22d1ab0d7a7a1b66ae6d71ea4f21938
Description: tools for generating an initramfs
 This package contains tools to create and boot an initramfs for packaged 2.6
 Linux kernel. The initramfs is a gzipped cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: makedev
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3.1-89ubuntu2
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: laptop-detect
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 56
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.13.7ubuntu2
Depends: dmidecode (>> 2.8-2)
Description: attempt to detect a laptop
 laptop-detect attempts to determine whether it is being run on a laptop or a
 desktop and appraises its caller of this.
Original-Maintainer: Otavio Salvador <otavio@debian.org>

Package: libxml2
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.7.8.dfsg-5.1ubuntu4.9
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Recommends: xml-core
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxml2
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1690
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.7.8.dfsg-5.1ubuntu4.9
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Recommends: xml-core
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: gstreamer0.10-plugins-base-apps
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gst-plugins-base0.10
Version: 0.10.36-1ubuntu0.1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24), libgstreamer0.10-0 (>= 0.10.36), perl, gstreamer0.10-tools
Description: GStreamer helper programs from the "base" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains helper programs from the "base" set, an essential
 exemplary set of elements.
Homepage: http://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <pkg-gstreamer-maintainers@lists.alioth.debian.org>

Package: libfarstream-0.1-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 698
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: farstream
Version: 0.1.2-0ubuntu1
Replaces: libgstfarsight0.10-0
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.2), libgstreamer-plugins-base0.10-0 (>= 0.10.33), libgstreamer0.10-0 (>= 0.10.33), libnice10 (>= 0.1.0), gstreamer0.10-plugins-base (>= 0.10.33), gstreamer0.10-plugins-good (>= 0.10.29), gstreamer0.10-nice (>= 0.1.0)
Pre-Depends: multiarch-support
Conflicts: libgstfarsight0.10-0
Description: Audio/Video communications framework: core library
 The Farstream project is an effort to create a framework to deal with all
 known audio/video conferencing protocols. On one side it offers a generic
 API that makes it possible to write plugins for different streaming
 protocols, on the other side it offers an API for clients to use those
 plugins.
 .
 This package provides the core Farstream library.
Original-Maintainer: Debian Telepathy maintainers <pkg-telepathy-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/software/farstream/releases/farstream/

Package: x11-xkb-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 528
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 7.6+4
Replaces: xbase-clients (<= 1:7.2.ds2-3)
Depends: libc6 (>= 2.7), libx11-6, libxaw7, libxkbfile1, libxt6
Description: X11 XKB utilities
 xkbutils contains a number of client-side utilities for XKB, the X11
 keyboard extension.
 .
 setxkbmap is a tool to query and change the current XKB map.
 .
 xkbbell generates a bell event through the keyboard.
 .
 xkbcomp is a tool to compile XKB definitions into map files the server
 can use.
 .
 xkbevd is an experimental tool to listen for certain XKB events and execute
 defined triggers when actions occur.
 .
 xkbprint is a tool to generate an image with the physical representation
 of the keyboard as XKB sees it.
 .
 xkbvleds shows the changing status of keyboard LEDs.
 .
 xkbwatch shows the changing status of modifiers and LEDs.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 204
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netkit-telnet
Version: 0.17-36build1
Replaces: netstd
Provides: telnet-client
Depends: netbase, libc6 (>= 2.11), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.1.1)
Description: The telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.
Original-Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>

Package: libgoocanvas3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: goocanvas
Version: 0.15-1
Depends: libatk1.0-0 (>= 1.29.3), libc6 (>= 2.4), libcairo2 (>= 1.4.10), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.12.0), libpango1.0-0 (>= 1.14.0), zlib1g (>= 1:1.1.4), libgoocanvas-common (= 0.15-1)
Description: canvas widget for GTK+ that uses the cairo 2D library
 GooCanvas is a canvas widget for GTK+ that uses the cairo 2D library for
 drawing. It has a model/view split, and uses interfaces for canvas items and
 views, so you can easily turn any application object into canvas items.
 .
 This package contains the shared library
Original-Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>
Homepage: http://live.gnome.org/GooCanvas

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1048
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.1.4.2+svn3283-3ubuntu5.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/securetty 1a028cba3ab1989a6a3e395720806069
 /etc/login.defs be0977c1c1c84c62823c7d7d4e099067
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/pam.d/login f6fd8b05973b278e6a2b7c61bc7732cd
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: gpgv
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gnupg
Version: 1.4.11-3ubuntu2.6
Depends: libbz2-1.0, libc6 (>= 2.14), libreadline6 (>= 6.0), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: desktop-file-utils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 239
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 0.20-0ubuntu3
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.28.0)
Conffiles:
 /etc/bash_completion.d/desktop-file-validate 34c0eff90e9bbf4c97c873334f676330
 /etc/gnome/defaults.list 6b2bd27b5441158d53ab0b2b3b637644
Description: Utilities for .desktop files
 Some utilities to make dealing with .desktop files easier:
  * update-desktop-database -- update the desktop-MIME mapping
  * desktop-file-validate -- validate a desktop file
  * desktop-file-install -- install a desktop file, munging en route.
Original-Maintainer: Ross Burton <ross@debian.org>

Package: libssl1.0.0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 2922
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: openssl
Version: 1.0.1-4ubuntu5.17
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Breaks: openssh-client (<< 1:5.9p1-4), openssh-server (<< 1:5.9p1-4)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: libssl1.0.0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 2689
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: openssl
Version: 1.0.1-4ubuntu5.17
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Breaks: openssh-client (<< 1:5.9p1-4), openssh-server (<< 1:5.9p1-4)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: xscreensaver-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 411
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xscreensaver
Version: 5.15-2ubuntu1
Replaces: gnome-screensaver (<< 2.15.4-0ubuntu1), xscreensaver (<< 5.04-3), xscreensaver-data-extra (<< 5.08-0ubuntu4)
Depends: libc6 (>= 2.7), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.12.0), libx11-6, libxmu6, libxt6
Suggests: xscreensaver
Breaks: gnome-screensaver (<< 2.26), kscreensaver-xsaver (<= 4:4.2.4-1)
Conflicts: kscreensaver-xsavers (<< 4:3.5.9-1), xscreensaver (<< 5.04-3)
Conffiles:
 /etc/X11/app-defaults/XScreenSaver-nogl d04a03b8c5a38734c992e3364edf6be4
Description: data files to be shared among screensaver frontends
 XScreenSaver is a modular screen saver and locker for X11,
 containing more than 200 screen savers.
 .
 This package contains a small selection of graphical screen saver
 modules (listed below) from the xscreensaver collection. This package
 is used by both xscreensaver and gnome-screensaver.
 .
 This is the selected set of non-GL screensavers shipped by default:
 fiberlamp and fuzzyflakes.
 .
 More display modes can be found in xscreensaver-data-extra, xscreensaver-gl
 and xscreensaver-gl-extra packages.
Homepage: http://www.jwz.org/xscreensaver/
Original-Maintainer: Jose Luis Rivas <ghostbar@debian.org>

Package: linux-image-3.2.0-65-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 146708
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 3.2.0-65.99
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, linux-image-3.0, redhat-cluster-modules
Depends: initramfs-tools (>= 0.36ubuntu6), module-init-tools (>= 3.3-pre11-4ubuntu3), crda (>= 1.1.1-1ubuntu2) | wireless-crda
Pre-Depends: dpkg (>= 1.10.24)
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo (>= 19.1)
Suggests: fdutils, linux-doc-3.2.0 | linux-source-3.2.0, linux-tools
Conflicts: hotplug (<< 0.0.20040105-1)
Description: Linux kernel image for version 3.2.0 on 64 bit x86 SMP
 This package contains the Linux kernel image for version 3.2.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: cups-ppdc
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cups
Version: 1.5.3-0ubuntu8.4
Replaces: cupsddk (<< 1.4.0)
Provides: cupsddk
Depends: libc6 (>= 2.4), libcups2 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), cups-common
Breaks: cupsddk (<< 1.4.0)
Description: Common UNIX Printing System(tm) - PPD manipulation utilities
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides utilities to generate and manipulate PPD files.
Homepage: http://www.cups.org
Original-Maintainer: Debian CUPS Maintainers <pkg-cups-devel@lists.alioth.debian.org>

Package: libzvbi-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: zvbi
Version: 0.2.33-4
Replaces: libzvbi-0.1 (<= 0.2.1-3)
Description: Vertical Blanking Interval decoder (VBI) - common files
 The VBI devices capture the hidden lines on a television picture that carry
 further information like closed-caption data, Teletext (primarily in
 Europe), and now Intercast and the ATVEC Internet television encodings.
 .
 This package contains internationalization files.
Original-Maintainer: Christian Marillat <marillat@debian.org>
Homepage: http://zapping.sourceforge.net/ZVBI/index.html

Package: libdbus-1-3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus
Version: 1.4.18-1ubuntu1.5
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libdbus-1-3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 381
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: dbus
Version: 1.4.18-1ubuntu1.5
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: gnome-user-guide
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 23744
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnome-user-docs
Version: 3.4.1-1
Provides: gnome2-user-guide
Depends: yelp (>= 3)
Description: GNOME user's guide
 Documentation for using the GNOME desktop environment and its components.
 It covers usage and setup of the core GNOME programs.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libperl5.14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.14.2-6ubuntu2.4
Replaces: perl-base (<= 5.8.7-4)
Depends: libc6 (>= 2.14), perl-base (= 5.14.2-6ubuntu2.4)
Conflicts: doc-base (<< 0.10.3), libxml-sax-perl (<< 0.99+dfsg-1ubuntu0.1)
Description: shared Perl library
 This package is required by programs which embed a Perl interpreter to
 ensure that the correct version of `perl-base' is installed.  It
 additionally contains the shared Perl library on architectures where the
 perl binary is linked to libperl.a (currently only i386, for performance
 reasons).  In other cases the actual library is in the `perl-base' package.
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libpeas-1.0-0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 288
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libpeas
Version: 1.2.0-1ubuntu1
Depends: libc6 (>= 2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libgirepository-1.0-1 (>= 0.9.2), libglib2.0-0 (>= 2.24.0), libgtk-3-0 (>= 3.0.0), libpython2.7 (>= 2.7), libpeas-common
Description: Application plugin library
 libpeas is a library that allows applications to support plugins.
Homepage: http://live.gnome.org/Libpeas
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libvorbisfile3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libvorbis
Version: 1.3.2-1ubuntu3
Replaces: libvorbis0 (<< 1.0.0)
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.2-1ubuntu3)
Pre-Depends: multiarch-support
Conflicts: libvorbis0 (<< 1.0.0)
Description: The Vorbis General Audio Compression Codec (High Level API)
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisfile library provides a convenient high-level API for decoding
 and basic manipulation of all Vorbis I audio streams.
Original-Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gettext
Version: 0.18.1.1-5ubuntu3
Provides: libasprintf0c2
Depends: libc6 (>= 2.8), libstdc++6 (>= 4.1.1)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: libruby
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ruby-defaults
Version: 4.8
Replaces: libbigdecimal-ruby (<< 4), libcurses-ruby (<< 4), libdbm-ruby, libdl-ruby (<< 4), libdrb-ruby (<< 4), liberb-ruby (<< 4), libgdbm-ruby, libiconv-ruby (<< 4), libopenssl-ruby, libpty-ruby (<< 4), libracc-runtime-ruby (<< 4), libreadline-ruby, librexml-ruby (<< 4), libsdbm-ruby (<< 4), libstrscan-ruby (<< 4), libsyslog-ruby (<< 4), libtest-unit-ruby (<< 4), libwebrick-ruby (<< 4), libxmlrpc-ruby (<< 4), libyaml-ruby (<< 4), libzlib-ruby (<< 4)
Provides: libbigdecimal-ruby, libcurses-ruby, libdbm-ruby, libdl-ruby, libdrb-ruby, liberb-ruby, libgdbm-ruby, libiconv-ruby, libopenssl-ruby, libpty-ruby, libracc-runtime-ruby, libreadline-ruby, librexml-ruby, libsdbm-ruby, libstrscan-ruby, libsyslog-ruby, libtest-unit-ruby, libwebrick-ruby, libxmlrpc-ruby, libyaml-ruby, libzlib-ruby
Depends: libruby1.8 (>> 1.8.7.334-1)
Conflicts: libbigdecimal-ruby (<< 4), libcurses-ruby (<< 4), libdbm-ruby, libdl-ruby (<< 4), libdrb-ruby (<< 4), liberb-ruby (<< 4), libgdbm-ruby, libiconv-ruby (<< 4), libopenssl-ruby, libpty-ruby (<< 4), libracc-runtime-ruby (<< 4), libreadline-ruby, librexml-ruby (<< 4), libsdbm-ruby (<< 4), libstrscan-ruby (<< 4), libsyslog-ruby (<< 4), libtest-unit-ruby (<< 4), libwebrick-ruby (<< 4), libxmlrpc-ruby (<< 4), libyaml-ruby (<< 4), libzlib-ruby (<< 4)
Description: Transitional package for libruby1.8
 This is a transitional package which ensures that users of libruby will use
 libruby1.8 in the future. It can safely be removed.
Original-Maintainer: akira yamada <akira@debian.org>
Homepage: http://www.ruby-lang.org/

Package: libflac8
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: flac
Version: 1.2.1-6
Depends: libc6 (>= 2.7), libogg0 (>= 1.0rc3)
Pre-Depends: multiarch-support
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://flac.sourceforge.net/

Package: module-init-tools
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 332
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: amd64
Version: 3.16-1ubuntu2
Depends: libc6 (>= 2.8), upstart-job
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initramfs-tools (<< 0.92bubuntu23)
Conffiles:
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-framebuffer.conf 96f2f501cc646b598263693c8976ddd1
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist-watchdog.conf 55327f9270c8a6257a833c4d127a39e1
 /etc/modprobe.d/blacklist.conf bc6754fa320733c6d239a4bb0148ffd7
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/init/module-init-tools.conf 48db1b767c3148fd83eba59d12fc9a5e
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
Homepage: http://www.kerneltools.org/
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: compiz-plugins-default
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 2212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: compiz
Version: 1:0.9.7.12-0ubuntu4
Replaces: compiz-fusion-plugins-extra (<< 0.9.2.1-0ubuntu3), compiz-gnome (<< 1:0.8.4-4ubuntu1), compiz-plugins (<< 1:0.9.4+bzr20110606-0ubuntu3)
Depends: compiz-core (= 1:0.9.7.12-0ubuntu4), libdecoration0 (= 1:0.9.7.12-0ubuntu4), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libgl1-mesa-glx | libgl1, libpng12-0 (>= 1.2.13-4), libstdc++6 (>= 4.6), libx11-6, libxcomposite1 (>= 1:0.3-1), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxrandr2 (>= 4.3)
Description: OpenGL window and compositing manager - default plugins
 Compiz brings to life a variety of visual effects that make the Linux desktop
 easier to use, more powerful and intuitive, and more accessible for users
 with special needs.
 .
 This package contains the default compiz plugins we activate in ubuntu coming
 with core compiz.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libenca0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: enca
Version: 1.13-4
Depends: libc6 (>= 2.4)
Description: Extremely Naive Charset Analyser - shared library files
 Enca is an Extremely Naive Charset Analyser. It detects the character set and
 the encoding of text files and can also convert them to other encodings.
 .
 This package contains the shared library needed to run applications compiled
 against libenca.
Original-Maintainer: Michal Čihař <nijel@debian.org>
Homepage: http://cihar.com/software/enca/

Package: libpango-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 533
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.222-1build1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libglib2.0-0 (>= 2.16.0), libpango1.0-0 (>= 1.22.0), perl (>= 5.14.2-3), perlapi-5.14.2, libcairo-perl, libglib-perl (>= 1.220)
Description: Perl module to layout and render international text
 Pango is a library for laying out and rendering text, with an emphasis on
 internationalization. Pango can be used anywhere that text layout is needed,
 but using Pango in conjunction with Cairo and/or Gtk2 provides a complete
 solution with high quality text handling and graphics rendering.
 .
 This package provides the Perl bindings for the Pango library.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://gtk2-perl.sourceforge.net/

Package: libffi6
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libffi
Version: 3.0.11~rc1-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libffi6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libffi
Version: 3.0.11~rc1-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: man-db
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: doc
Installed-Size: 1736
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Version: 2.6.1-2ubuntu1
Replaces: man, manpages-de (<< 0.5-4), nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, dpkg (>= 1.9.0), libc6 (>= 2.14), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Suggests: groff, less, www-browser
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
 /etc/manpath.config 167675fd93075fb5f6ce1aa5f56a8a22
 /etc/cron.weekly/man-db 643340ce3fb3994ef2ae7b88a2cf3230
 /etc/cron.daily/man-db 18745b8d583be7a4b7a00e9ffc98ac99
Description: on-line manual pager
 This package provides the man command, the primary way of examining the
 on-line help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: http://man-db.nongnu.org/

Package: libbrasero-media3-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1719
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: brasero
Version: 3.4.1-0ubuntu1.1
Replaces: brasero (<< 2.31)
Depends: libappindicator3-1 (>= 0.2.96), libburn4 (>= 1.1.8), libc6 (>= 2.14), libcairo2 (>= 1.10.0), libcanberra-gtk3-0 (>= 0.25), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgstreamer-plugins-base0.10-0 (>= 0.10.12), libgstreamer0.10-0 (>= 0.10.15), libgtk-3-0 (>= 3.0.0), libisofs6 (>= 1.1.6), libnotify4 (>= 0.7.0), libpango1.0-0 (>= 1.14.0), libtotem-plparser17 (>= 2.32), libunity9 (>= 3.4.6), libx11-6, libxml2 (>= 2.7.4), dvd+rw-tools, brasero-common (= 3.4.1-0ubuntu1.1)
Recommends: gnome-icon-theme, gstreamer0.10-plugins-good
Suggests: gstreamer0.10-plugins-bad, gstreamer0.10-fluendo-mp3, gstreamer0.10-plugins-ugly, cdrdao (>= 1:1.2.3)
Description: CD/DVD burning library for GNOME - runtime
 Libbrasero is a simple library to burn, copy and erase CD and DVD
 media.
 .
 This package contains the shared library.
Homepage: http://www.gnome.org/projects/brasero/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: sound-theme-freedesktop
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: sound
Installed-Size: 553
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.7.pristine-2
Replaces: freedesktop-sound-theme (<< 0.7.pristine)
Provides: freedesktop-sound-theme
Breaks: freedesktop-sound-theme (<< 0.7.pristine)
Description: freedesktop.org sound theme
 The default freedesktop.org sound theme following the XDG theming
 specification. It contains a full set of sounds for different
 desktop events.
 .
 These sounds come from various sources: KDE, Ekiga, Pidgin/Purple, ALSA.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/

Package: ruby-vte
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ruby-gnome2
Version: 1.0.3-1build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.8.0), libpango1.0-0 (>= 1.14.0), libruby1.8 (>= 1.8.7.352), libruby1.9.1 (>= 1.9.2.0), libvte9 (>= 1:0.24.0)
Description: VTE widget bindings for the Ruby language
 VTE is a Ruby binding for the VTE terminal emulator widget for GTK+.
Original-Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: http://ruby-gnome2.sourceforge.jp/

Package: libcairo2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1375
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cairo
Version: 1.10.2-6.1ubuntu3
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.3.5), libpixman-1-0 (>= 0.18.0), libpng12-0 (>= 1.2.13-4), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.2), libxrender1, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Breaks: iceape-browser (<= 2.0.3-3), libgtk-directfb-2.0-0, xulrunner-1.9, xulrunner-1.9.1 (<= 1.9.1.8-3)
Description: The Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Homepage: http://cairographics.org/
Original-Maintainer: Dave Beckett <dajobe@debian.org>

Package: libcairo2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1429
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: cairo
Version: 1.10.2-6.1ubuntu3
Depends: libc6 (>= 2.11), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.3.5), libpixman-1-0 (>= 0.18.0), libpng12-0 (>= 1.2.13-4), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.2), libxrender1, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Breaks: iceape-browser (<= 2.0.3-3), libgtk-directfb-2.0-0, xulrunner-1.9, xulrunner-1.9.1 (<= 1.9.1.8-3)
Description: The Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Homepage: http://cairographics.org/
Original-Maintainer: Dave Beckett <dajobe@debian.org>

Package: fonts-liberation
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.07.0-2ubuntu0.1
Replaces: ttf-liberation (<< 1.07.0-2)
Provides: ttf-liberation
Conflicts: ttf-liberation (<< 1.07.0-2)
Description: Fonts with the same metrics as Times, Arial and Courier
 A set of serif, sans-serif and monospaced fonts from Red Hat with
 exactly the same metrics as the (non-free) Microsoft Times, Arial
 and Courier fonts, which implies those fonts can serve as a drop-in
 replacement. The font family is named Liberation.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: https://fedorahosted.org/liberation-fonts/

Package: xfce4-indicator-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 290
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 0.4.0-0ubuntu2+ppa1
Provides: indicator-renderer
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.24.0), libindicator7 (>= 0.4.90), libxfce4util6 (>= 4.9.0), xfce4-panel (>= 4.9.2)
Recommends: indicator-messages-gtk2
Description: plugin to display information from applications in the Xfce4 panel
 A small plugin to display information from various applications consistently
 in the Xfce4 panel as described in Ubuntus MessagingMenu design specification.
Homepage: http://goodies.xfce.org/projects/panel-plugins/xfce4-indicator-plugin/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: libhtml-format-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.10-1
Depends: perl, libfont-afm-perl, libhtml-tree-perl
Description: module for transforming HTML into various formats
 HTML::Formatter is a base class for various formatters, which are modules
 that traverse an HTML syntax tree and produce various output file formats.
 There are currently three formatter classes included:
 .
  * HTML::FormatText for converting to plain human-readable text
  * HTML::FormatPS for converting to PostScript
  * HTML::FormatRTF for converting to Microsoft's Rich Text Format (RTF)
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/HTML-Format/

Package: pulseaudio-utils
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: sound
Installed-Size: 242
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pulseaudio
Version: 1:1.1-0ubuntu15.4
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libpulse0 (>= 1:1.1-0ubuntu15.4), libsm6, libsndfile1 (>= 1.0.20), libx11-6, libx11-xcb1, libxcb1, libxtst6, libpulsedsp
Suggests: avahi-daemon
Description: Command line tools for the PulseAudio sound server
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.
Homepage: http://www.pulseaudio.org
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>

Package: libgdbm3
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gdbm
Version: 1.8.3-10
Depends: libc6 (>= 2.2.5), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://directory.fsf.org/project/gdbm/

Package: libexif12
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libexif
Version: 0.6.20-2ubuntu0.1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library to parse EXIF files
 Most digital cameras produce EXIF files, which are JPEG files with
 extra tags that contain information about the image. The EXIF library
 allows you to parse an EXIF file and read the data from those tags.
Homepage: http://libexif.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>

Package: libexif12
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libexif
Version: 0.6.20-2ubuntu0.1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library to parse EXIF files
 Most digital cameras produce EXIF files, which are JPEG files with
 extra tags that contain information about the image. The EXIF library
 allows you to parse an EXIF file and read the data from those tags.
Homepage: http://libexif.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>

Package: sharutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 712
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.11-1
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Suggests: bsd-mailx | mailx
Conflicts: shar, uuencode
Description: shar, unshar, uuencode, uudecode
 `shar' makes so-called shell archives out of many files, preparing
 them for transmission by electronic mail services.  `unshar' helps
 unpacking shell archives after reception.  Other related utility
 programs help with other tasks.
 .
 `uuencode' prepares a file for transmission over an electronic
 channel which ignores or otherwise mangles the eight bit (high
 order bit) of bytes.  `uudecode' does the converse transformation.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/sharutils/

Package: libsox-fmt-alsa
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: sox
Version: 14.3.2-3
Depends: libasound2 (>> 1.0.24.1), libc6 (>= 2.2.5), libsox1b (>= 14.3.1)
Description: SoX alsa format I/O library
 SoX is the swiss army knife of sound processing.
 .
 This package contains the SoX alsa format I/O library.
 .
 alsa: http://www.alsa-project.org
Original-Maintainer: Pascal Giard <pascal@debian.org>
Homepage: http://sox.sourceforge.net

Package: libavcodec53
Status: deinstall ok config-files
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 6886
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libav
Version: 4:0.8.12-0ubuntu0.12.04.1
Config-Version: 4:0.8.12-0ubuntu0.12.04.1
Depends: libavutil51 (>= 4:0.8.12-0ubuntu0.12.04.1) | libavutil-extra-51 (>= 4:0.8.12), libavutil51 (<< 4:0.8.12-99) | libavutil-extra-51 (<< 4:0.8.12.99), libc6 (>= 2.14), libgsm1 (>= 1.0.13), libschroedinger-1.0-0 (>= 1.0.0), libspeex1 (>= 1.2~beta3-1), libtheora0 (>= 1.0), libva1 (>> 1.0.15~), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx1 (>= 1.0.0), zlib1g (>= 1:1.2.0)
Pre-Depends: multiarch-support
Description: Libav codec library
 Libav is a complete, cross-platform solution to decode, encode, record,
 convert and stream audio and video.
 .
 This is the codec library from Libav (both encoding and decoding).
 .
 It supports most existing codecs (MPEG, MPEG2, MPEG4, AC3, DV...).
Homepage: http://libav.org/
Original-Maintainer: Debian multimedia packages maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: libupnp3
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libupnp
Version: 1:1.6.6-5.1ubuntu0.12.04.1
Replaces: libupnp0, libupnp2
Depends: libc6 (>= 2.14)
Conflicts: libupnp0, libupnp2, libupnp4 (<< 1.8.0~svn20090313)
Description: Portable SDK for UPnP Devices, version 1.6 (shared libraries)
 The Portable SDK for UPnP Devices (libupnp) provides developers with an
 API and open source code for building control points, devices, and
 bridges that are compliant with Version 1.0 of the Universal Plug and
 Play Device Architecture Specification - see http://www.upnp.org/ for
 specifications.
 .
 The libupnp3 package contains the runtime libraries for uPnP.
Homepage: http://pupnp.sourceforge.net/
Original-Maintainer: Nick Leverton <nick@leverton.org>

Package: libtie-ixhash-perl
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 84
Maintainer: Ivan Kohler <ivan-debian@420.am>
Architecture: all
Version: 1.21-2
Depends: perl (>= 5.6.0-16)
Description: ordered associative arrays for Perl
 This Perl module implements Perl hashes that preserve the order in which the
 hash elements were added.  The order is not affected when values
 corresponding to existing keys in the IxHash are changed.  The elements can
 also be set to any arbitrary supplied order.  The familiar perl array
 operations can also be performed on the IxHash.

Package: libgcrypt11
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 586
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.5.0-3ubuntu0.2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.10)
Pre-Depends: multiarch-support
Suggests: rng-tools
Breaks: gnupg2 (<< 2.0.17-2ubuntu2), gpgsm (<< 2.0.17-2ubuntu2), libgnutls26 (<< 2.12.7-3)
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger,
 Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgcrypt11
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 610
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 1.5.0-3ubuntu0.2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.10)
Pre-Depends: multiarch-support
Suggests: rng-tools
Breaks: gnupg2 (<< 2.0.17-2ubuntu2), gpgsm (<< 2.0.17-2ubuntu2), libgnutls26 (<< 2.12.7-3)
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger,
 Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 381
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: jquery
Version: 1.7.1-1ubuntu1
Replaces: jquery
Suggests: javascript-common
Conflicts: jquery
Description: JavaScript library for dynamic web applications
 jQuery is a fast, concise, JavaScript Library that simplifies how you
 traverse HTML documents, handle events, perform animations, and add Ajax
 interactions to your web pages. jQuery is designed to change the way
 that you write JavaScript.
Homepage: http://jquery.com/
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>

Package: libframe6
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: frame
Version: 2.2.4-0ubuntu0.12.04.1
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), libx11-6, libxi6 (>= 2:1.5.99.2)
Pre-Depends: multiarch-support
Description: Touch Frame Library
 This library handles the buildup and synchronization of a set of
 simultaneous touches. The library is input agnostic, with bindings
 for mtdev, frame and XI2.1.
Homepage: https://launchpad.net/frame

Package: xcursor-themes
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 4088
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.3-1
Conffiles:
 /etc/X11/cursors/core.theme 73cec8bd811379ca1a61cb240e96fb51
 /etc/X11/cursors/handhelds.theme d8be9d15f982704d007d3ba3d8009f54
 /etc/X11/cursors/redglass.theme d1e8adaca475bf4a4b295ca5407244fd
 /etc/X11/cursors/whiteglass.theme f24b4a1b5e7754dbb60a831af8bc591a
Description: Base X cursor themes
 This package contains the additional base X cursor themes --
 handhelds, redglass, and whiteglass. These themes are not essential
 for the X server to run.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: python-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 413
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-python
Version: 1.0.0-1ubuntu1
Replaces: python2.4-dbus
Provides: python2.7-dbus
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), libc6 (>= 2.4), libdbus-1-3 (>= 1.2.16), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.12.0), python-dbus-dev
Recommends: python-gi | python-gobject-2 | python-qt4-dbus
Suggests: python-dbus-doc, python-dbus-dbg
Breaks: gajim (<< 0.11.1), gnome-osd (<< 0.12.0), python-qt4-dbus (<< 4.8.3-3)
Conflicts: python2.4-dbus
Description: simple interprocess messaging system (Python interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings#Python
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: xserver-xorg-video-sis
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 639
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:0.10.3-3build2
Provides: xorg-driver-video
Depends: libc6 (>= 2.7), xorg-video-abi-11, xserver-xorg-core (>= 2:1.10.99.901)
Description: X.Org X server -- SiS display driver
 This package provides the driver for all SiS and XGI Volari cards.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This package is built from the X.org xf86-video-sis driver module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl
Recommends: libio-socket-ssl-perl (>= 1.38)
Breaks: libwww-perl (<< 6.00)
Description: module providing low-level HTTP connection client
 The Net::HTTP class is a low-level HTTP client.  An instance of the
 Net::HTTP class represents a connection to an HTTP server.  The
 HTTP protocol is described in RFC 2616.  The Net::HTTP class
 supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
 You can mix its methods with reading and writing from the socket directly.
 This is not necessarily a good idea, unless you know what you are doing.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/Net-HTTP/

Package: libbind9-80
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.8.1.dfsg.P1-4ubuntu0.8
Replaces: libbind0
Depends: libc6 (>= 2.14), libdns81, libisc83, libisccfg82
Conflicts: libbind0, libbind9-41
Description: BIND9 Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libbind9 shared library used by BIND's daemons and
 clients.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libwildmidi-config
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: wildmidi
Version: 0.2.3.4-2.1precise1
Replaces: libwildmidi0, libwildmidi1 (<< 0.2.3.4-2~)
Recommends: freepats
Breaks: libwildmidi0, libwildmidi1 (<< 0.2.3.4-2~)
Conffiles:
 /etc/wildmidi/wildmidi.cfg cd3ca7c045e489ae6321ecd25de8023a
Description: software MIDI player configuration
 MIDI streaming library designed to process a MIDI file and stream the results
 as stereo audio data through a buffer which an external program can then
 process further.
 .
 This package contains the configuration files and relevant documentation
Original-Maintainer: Emmet Hikory <emmet.hikory@gmail.com>
Homepage: http://wildmidi.sourceforge.net/

Package: libgegl-0.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1527
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gegl
Version: 0.0.22-2ubuntu3
Depends: libbabl-0.0-0, libc6 (>= 2.11), libcairo2 (>= 1.2.4), libgcc1 (>= 1:4.1.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libjpeg8 (>= 8c), libopenexr6 (>= 1.6.1), libpango1.0-0 (>= 1.14.0), libpng12-0 (>= 1.2.13-4), librsvg2-2 (>= 2.14.4), libstdc++6 (>= 4.1.1)
Description: Generic Graphics Library
 GEGL (Generic Graphics Library) is a graph based image processing
 framework.
 .
 GEGLs original design was made to scratch GIMPs itches for a new
 compositing and processing core. This core is being designed to have
 minimal dependencies. and a simple well defined API
Homepage: http://www.gegl.org/
Original-Maintainer: Ross Burton <ross@debian.org>

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 673
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.1.ESV-R4-0ubuntu5.9
Replaces: dhcp3-common
Provides: dhcp3-common
Depends: debianutils (>= 2.8.2), libc6 (>= 2.15)
Description: common files used by all the isc-dhcp* packages
 This package contains the files used by all the packages from ISC
 DHCP.
Original-Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>

Package: libwebkitgtk-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 23354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: webkit
Version: 1.8.3-0ubuntu0.12.04.1
Depends: libjavascriptcoregtk-1.0-0 (= 1.8.3-0ubuntu0.12.04.1), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.14), libcairo2 (>= 1.10.0), libenchant1c2a (>= 1.6), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libgail18 (>= 1.18.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libgeoclue0 (>= 0.11.1), libglib2.0-0 (>= 2.31.8), libgstreamer-plugins-base0.10-0 (>= 0.10.31), libgstreamer0.10-0 (>= 0.10.31), libgtk2.0-0 (>= 2.24.3), libicu48 (>= 4.8-1), libjpeg8 (>= 8c), libpango1.0-0 (>= 1.22.0), libpng12-0 (>= 1.2.13-4), libsoup2.4-1 (>= 2.37.92), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.1.1), libx11-6, libxml2 (>= 2.7.4), libxrender1, libxslt1.1 (>= 1.1.25), libxt6, zlib1g (>= 1:1.1.4), libwebkitgtk-1.0-common (>= 1.8.3)
Breaks: claws-mail-fancy-plugin (<< 3.7.10-3), midori (<< 0.4.1-2)
Description: Web content engine library for GTK+
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
 .
 This is the library for embedding in GTK+ applications.
Homepage: http://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: libsdl1.2debian
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 494
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsdl1.2
Version: 1.2.14-6.4ubuntu3
Replaces: libsdl1.2debian-all, libsdl1.2debian-alsa, libsdl1.2debian-esd, libsdl1.2debian-nas, libsdl1.2debian-oss, libsdl1.2debian-pulseaudio
Depends: libasound2 (>> 1.0.24.1), libc6 (>= 2.4), libcaca0 (>= 0.99.beta17-1), libpulse0 (>= 1:0.99.1), libx11-6 (>= 2:1.4.99.1), libxext6
Pre-Depends: multiarch-support
Conflicts: libsdl1.2, libsdl1.2-all, libsdl1.2-esd, libsdl1.2-nas, libsdl1.2-oss, libsdl1.2debian-all, libsdl1.2debian-alsa, libsdl1.2debian-esd, libsdl1.2debian-nas, libsdl1.2debian-oss, libsdl1.2debian-pulseaudio
Description: Simple DirectMedia Layer
 SDL is a library that allows programs portable low level access to
 a video framebuffer, audio output, mouse, and keyboard.
 .
 This version of SDL is compiled with X11 and caca graphics
 drivers and OSS, ALSA, NAS and PulseAudio sound drivers.
Homepage: http://www.libsdl.org/
Original-Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>

Package: libxinerama1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxinerama
Version: 2:1.1.1-3ubuntu0.1
Depends: libc6 (>= 2.2.5), libx11-6 (>= 2:1.4.99.1), libxext6
Pre-Depends: multiarch-support
Description: X11 Xinerama extension library
 libXinerama provides an X Window System client interface to the XINERAMA
 extension to the X protocol.
 .
 The Xinerama (also known as panoramiX) extension allows for multiple screens
 attached to a single display to be treated as belonging together, and to give
 desktop applications a better idea of the monitor layout.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxinerama1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libxinerama
Version: 2:1.1.1-3ubuntu0.1
Depends: libc6 (>= 2.1.3), libx11-6 (>= 2:1.4.99.1), libxext6
Pre-Depends: multiarch-support
Description: X11 Xinerama extension library
 libXinerama provides an X Window System client interface to the XINERAMA
 extension to the X protocol.
 .
 The Xinerama (also known as panoramiX) extension allows for multiple screens
 attached to a single display to be treated as belonging together, and to give
 desktop applications a better idea of the monitor layout.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: screensaver-default-images
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 348
Maintainer: Oliver Grawert <ogra@ubuntu.com>
Architecture: all
Version: 0.2-1
Depends: xscreensaver-data
Description: Wallpapers for image processing screensavers
 This package contains a collection of Community contributed artwork
 and photos to be used in image processing and distorting screensavers

Package: libuuid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libuuid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: util-linux
Version: 2.20.1-1ubuntu3.1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libgtop2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libgtop2
Version: 2.28.4-2
Description: gtop system monitoring library (common)
 The gtop library reads information about processes and the state of the
 system. It is used by the GNOME desktop environment.
 .
 This package contains the translations.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgcr-3-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 760
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gnome-keyring
Version: 3.2.2-2ubuntu4.1
Depends: libc6 (>= 2.15), libcairo2 (>= 1.2.4), libgck-1-0 (>= 3.2.2), libgcrypt11 (>= 1.4.5), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgtk-3-0 (>= 3.1.4), libp11-kit0 (>= 0.6), libpango1.0-0 (>= 1.18.0), libgcr-3-common
Description: Library for Crypto UI related task - runtime
 GCR is a library for crypto UI and related tasks.
 .
 This package contains the shared libraries needed to run programs
 built against the GCR library.
Homepage: http://live.gnome.org/GnomeKeyring
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: fonts-horai-umefont
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 87351
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 434-1
Replaces: ttf-umefont (<< 426-1)
Conflicts: ttf-umefont (<< 426-1)
Description: Japanese TrueType font, Ume-font
 Umefont is Japanese TrueType font, it consists of below 18 fonts
  * Ume Gothic (Original, O5, C4, C5, S4, S5)
  * Ume P Gothic (Original, O5, C4, C5, S4, S5)
  * Ume UI Gothic (Original, O5)
  * Ume Mincho (Original, S3)
  * Ume P Mincho (Original, S3)
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: http://sourceforge.jp/projects/ume-font/wiki/FrontPage

Package: python-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3075
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyparsing
Version: 1.5.2-2ubuntu1
Provides: python2.7-pyparsing
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Description: Python parsing module
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
Homepage: http://pyparsing.wikispaces.com/
Original-Maintainer: Kevin Coyner <kcoyner@debian.org>

Package: libspandsp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 807
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: spandsp
Version: 0.0.6~pre18-2build1
Depends: libc6 (>= 2.4), libtiff4
Conflicts: asterisk-app-dtmftotext (<= 0.0.20060218-4)
Description: Telephony signal processing library
 This is a low-level signal processing library that modulate and demodulate
 signals commonly used in telephony, such as the "noise" generated by a
 fax modem or DTMF touchpad.
 .
 This package contains the shared library.
Original-Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org>
Homepage: http://www.soft-switch.org/

Package: libgd2-xpm
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 633
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgd2
Version: 2.0.36~rc1~dfsg-6ubuntu2
Provides: libgd2
Depends: libc6 (>= 2.11), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), libxpm4, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: libgd-tools
Conflicts: libgd2, libgd2-noxpm
Description: GD Graphics Library version 2
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library, built with XPM (X pixmap)
 and fontconfig support.
Homepage: http://www.libgd.org/
Original-Maintainer: GD team <pkg-gd-devel@lists.alioth.debian.org>

Package: libgd2-xpm
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 625
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libgd2
Version: 2.0.36~rc1~dfsg-6ubuntu2
Provides: libgd2
Depends: libc6 (>= 2.11), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), libxpm4, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: libgd-tools
Conflicts: libgd2, libgd2-noxpm
Description: GD Graphics Library version 2
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library, built with XPM (X pixmap)
 and fontconfig support.
Homepage: http://www.libgd.org/
Original-Maintainer: GD team <pkg-gd-devel@lists.alioth.debian.org>

Package: cmap-adobe-japan1
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2464
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0+20090930-2
Description: CMaps for Adobe-Japan1
 CMap is a sort of a mapping table used for converting a certain
 charset/encoding-specific charcode to CID code.
 .
 This package contains CMap files for Adobe-Japan1 character collection,
 which stands for Adobe-defined one, and including standard Japanese
 charsets.
 .
 It is used by gs-cjk (ghostscript with CJK-TrueType extension) to
 handle Japanese TrueType fonts.
Original-Maintainer: Kenshi Muto <kmuto@debian.org>
Homepage: http://opensource.adobe.com/wiki/display/cmap/CMap+Resources

Package: libgtkhotkey1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gtkhotkey
Version: 0.2.1-3
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.24.0)
Description: Gtk hotkey shared library
 Cross platform library for using desktop wide hotkeys
 Platform independent hotkey handling for Gtk+ applications.
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Homepage: https://launchpad.net/gtkhotkey

Package: libpathplan4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphviz
Version: 2.26.3-10ubuntu1.1
Depends: libc6 (>= 2.15)
Conflicts: libgraphviz4
Description: rich set of graph drawing tools - pathplan library
 Graphviz is a set of graph drawing tools. See the description of the graphviz
 package for a full description.
 .
 This package contains the pathplan library.
Homepage: http://www.graphviz.org/
Original-Maintainer: David Claughton <dave@eclecticdave.com>

Package: feh
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 363
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.2-1
Depends: giblib1 (>= 1.2.4), libc6 (>= 2.7), libcurl3 (>= 7.16.2-1), libimlib2, libpng12-0 (>= 1.2.13-4), libx11-6, libxinerama1
Recommends: libjpeg-progs
Description: imlib2 based image viewer
 feh is a fast, lightweight image viewer which uses imlib2. It is
 commandline-driven and supports multiple images through
 slideshows, thumbnail browsing or multiple windows, and montages
 or index prints (using TrueType fonts to display file info).
 Advanced features include fast dynamic zooming, progressive
 loading, loading via HTTP (with reload support for watching
 webcams), recursive file opening (slideshow of a directory
 hierarchy), and mouse wheel/keyboard control.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: http://feh.finalrewind.org/

Package: libtasn1-3
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.10-1ubuntu1.2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libtasn1-3
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Version: 2.10-1ubuntu1.2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libsoup2.4-1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 518
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsoup2.4
Version: 2.38.1-1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.8), libxml2 (>= 2.7.4), glib-networking (>= 2.32.0)
Pre-Depends: multiarch-support
Description: HTTP library implementation in C -- Shared library
 It was originally part of a SOAP (Simple Object Access Protocol)
 implementation called Soup, but the SOAP and non-SOAP parts have now been
 split into separate packages.
 .
 libsoup uses the Glib main loop and is designed to work well with GTK+
 applications.  This enables GNOME applications to access HTTP servers
 on the network in a completely asynchronous fashion, very similar to
 the GTK+ programming model (a synchronous operation mode is also
 supported for those who want it).
 .
 Features:
  * Both asynchronous (GMainLoop and callback-based) and synchronous APIs
  * Automatically caches connections
  * SSL Support using GnuTLS
  * Proxy support, including authentication and SSL tunneling
  * Client support for Digest, NTLM, and Basic authentication
  * Server support for Digest and Basic authentication
  * Basic client-side SOAP and XML-RPC support
 .
 This package contains the shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: lsb-base
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: misc
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lsb
Version: 4.0-0ubuntu20.3
Replaces: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Depends: sed, ncurses-bin
Conflicts: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Conffiles:
 /etc/lsb-base-logging.sh 0aa55cad853be603ce31790c696e394b
Description: Linux Standard Base 4.0 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linux-foundation.org/en/LSB
Original-Maintainer: Chris Lawrence <lawrencc@debian.org>

Package: libcurl3-gnutls
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 526
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: curl
Version: 7.22.0-3ubuntu4.8
Replaces: libcurl4-gnutls
Depends: libc6 (>= 2.15), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.6.1-0), libgssapi-krb5-2 (>= 1.10+dfsg~), libidn11 (>= 1.13), libldap-2.4-2 (>= 2.4.7), librtmp0 (>= 2.3), zlib1g (>= 1:1.1.4), ca-certificates
Pre-Depends: multiarch-support
Conflicts: libcurl4-gnutls
Description: Multi-protocol file transfer library (GnuTLS)
 libcurl is designed to be a solid, usable, reliable and portable
 multi-protocol file transfer library.
 .
 SSL support is provided by GnuTLS.
 .
 This is the shared version of libcurl.
Homepage: http://curl.haxx.se
Original-Maintainer: Ramakrishnan Muthukrishnan <rkrishnan@debian.org>

Package: gnome-settings-daemon
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1684
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 3.4.2-0ubuntu0.6.6
Depends: gconf-service, libappindicator3-1 (>= 0.4.90), libc6 (>= 2.14), libcairo2 (>= 1.10.0), libcanberra-gtk3-0 (>= 0.25), libcanberra0 (>= 0.2), libcolord1 (>= 0.1.12), libcups2 (>= 1.4.0), libdbus-glib-1-2 (>= 0.88), libfontconfig1 (>= 2.8.0), libgconf-2-4 (>= 2.31.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgnome-desktop-3-2 (>= 3.3.4), libgnomekbd7 (>= 2.91.90), libgtk-3-0 (>= 3.3.4), libgudev-1.0-0 (>= 147), liblcms2-2 (>= 2.2+git20110628-2), libnotify4 (>= 0.7.3), libnspr4 (>= 1.8.0.10), libnss3 (>= 3.12.0~1.9b1), libpolkit-gobject-1-0 (>= 0.99), libpulse-mainloop-glib0 (>= 1:0.99.1), libpulse0 (>= 1:0.99.1), libupower-glib1 (>= 0.9.9), libwacom2 (>= 0.3), libx11-6, libxfixes3 (>= 1:4.0.1), libxi6 (>= 2:1.2.99.4), libxklavier16 (>= 5.0), libxtst6, dconf-gsettings-backend | gsettings-backend, gsettings-desktop-schemas (>= 3.3.90-0ubuntu2), nautilus-data (>= 2.91.3-1)
Recommends: pulseaudio
Suggests: x11-xserver-utils, gnome-screensaver, metacity | x-window-manager
Breaks: banshee (<< 0.13.2+dfsg-7), gnome-color-manager (<< 3.0), gnome-control-center (<< 1:2.21.5), gnome-screensaver (<< 2.28.0), gnome-session (<< 2.24), rhythmbox (<< 0.11.5), totem (<< 2.22.0), unity-greeter (<< 0.2.1-0ubuntu1)
Conffiles:
 /etc/xdg/autostart/gnome-fallback-mount-helper.desktop 58e84e1f8fd68806037a2f70265af2f9
 /etc/xdg/autostart/gnome-settings-daemon.desktop d80fe6e07c196b0b069fc6185d3e3a29
 /etc/dbus-1/system.d/org.gnome.SettingsDaemon.DateTimeMechanism.conf 0c753d296e5fe10239b210c97c1f20e7
Description: daemon handling the GNOME session settings
 This package contains the daemon which is responsible for setting the
 various parameters of a GNOME session and the applications that run
 under it. It handles the following kinds of settings:
 .
  * Keyboard: layout, accessibility options, shortcuts, media keys
  * Clipboard management
  * Theming: background, icons, GTK+ applications
  * Cleanup of unused files
  * Mouse: cursors, speed, accessibility options
  * Startup of other daemons: screensaver, sound daemon
  * Typing break
 .
 It also sets various application settings through X resources and
 freedesktop.org XSETTINGS.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: fontconfig
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 446
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.8.0-3ubuntu9.1
Replaces: fontconfig-config (<< 2.5.93-1)
Depends: libc6 (>= 2.3.4), libfontconfig1 (>= 2.8.0), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by
 defoma available to fontconfig applications.
Original-Maintainer: Keith Packard <keithp@debian.org>

Package: libsoup-gnome2.4-1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsoup2.4
Version: 2.38.1-1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.31.7), libgnome-keyring0 (>= 2.20.3), libsoup2.4-1 (>= 2.33.92), libsqlite3-0 (>= 3.5.9)
Pre-Depends: multiarch-support
Description: HTTP library implementation in C -- GNOME support library
 It was originally part of a SOAP (Simple Object Access Protocol)
 implementation called Soup, but the SOAP and non-SOAP parts have now been
 split into separate packages.
 .
 libsoup uses the Glib main loop and is designed to work well with GTK+
 applications.  This enables GNOME applications to access HTTP servers
 on the network in a completely asynchronous fashion, very similar to
 the GTK+ programming model (a synchronous operation mode is also
 supported for those who want it).
 .
 The GNOME support library is used for features which are important to
 GNOME apps, but which require GNOME-specific libraries that non-GNOME
 apps may not want to add dependencies on.
 .
 Features:
  * Both asynchronous (GMainLoop and callback-based) and synchronous APIs
  * Automatically caches connections
  * SSL Support using GnuTLS
  * Proxy support, including authentication and SSL tunneling
  * Client support for Digest, NTLM, and Basic authentication
  * Server support for Digest and Basic authentication
  * Basic client-side SOAP and XML-RPC support
 .
 This package contains the GNOME support shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: xfce4-datetime-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 486
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 0.6.2-0ubuntu1~ppa0.12.04.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.12.0), libpango1.0-0 (>= 1.14.0), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), xfce4-panel (>= 4.9.2)
Description: date and time plugin for the Xfce4 panel
 This plugin shows the date and time in the panel, and a calendar appears when
 you left-click on it.
Homepage: http://goodies.xfce.org/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: libparted0debian1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 571
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: parted
Version: 2.3-8ubuntu5.2
Replaces: libparted0 (<< 2.2-4), libparted1 (<< 2.2), libparted1.4 (<< 1.4.24-2), libparted2 (<< 2.2)
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Suggests: parted | nparted, libparted0-dev, libparted0-i18n (= 2.3-8ubuntu5.2)
Breaks: dmraid (<< 1.0.0.rc16-4.1ubuntu2)
Conflicts: libparted1 (<< 2.2), libparted2 (<< 2.2), parted (<< 1.4.13+14pre1)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: http://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>

Package: printer-driver-hpijs
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 1746
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: hplip
Version: 3.12.2-1ubuntu3.4
Replaces: hpijs (<< 3.11.10-1ubuntu2)
Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libhpmud0 (= 3.12.2-1ubuntu3.4), libjpeg8 (>= 8c), libstdc++6 (>= 4.1.1)
Recommends: ghostscript, cups (>= 1.4.0) | cupsddk | hpijs-ppds, foomatic-filters
Suggests: hplip, hpijs-ppds, hplip-doc
Breaks: hpijs (<< 3.11.10-1ubuntu2)
Description: HP Linux Printing and Imaging - gs IJS driver (hpijs)
 This package contains an IJS printer driver for Ghostscript, which
 adds support for most inkjet printers and some LaserJet printers
 manufactured by HP.  It is also required for HPLIP fax support.
 .
 The Debian package of hpijs includes the so-called rss patch, to use
 pure black ink instead of composite black in printers that don't do
 color map conversion in firmware.
 .
 HPIJS can take advantage of Ghostscript IJS KRGB support when
 available, to enhance black printing on printers that do color
 map conversion in firmware and are thus not affected by the old
 rss patch.
 .
 Users of the CUPS printing system are advised to also install the
 hplip package, and use the hp CUPS backend to send data to the printer.
 HPLIP supports USB, networked and parallel-port devices, and enables
 extended HPIJS functionality such as border-less printing.
 Selecting any hpijs ppd in CUPS will use hpijs automatically.
 .
 HPIJS is meant to be used through the foomatic system (see the
 foomatic-filters package).
Homepage: http://hplipopensource.com/hplip-web/index.html
Original-Maintainer: Debian HPIJS and HPLIP maintainers <pkg-hpijs-devel@lists.alioth.debian.org>

Package: libjavascriptcoregtk-3.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3821
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: webkit
Version: 1.8.3-0ubuntu0.12.04.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.2), libicu48 (>= 4.8-1), libstdc++6 (>= 4.1.1)
Description: Javascript engine library for GTK+
 Javascript Core is the javascript engine used in many ports of
 WebKit. This build comes from WebKitGTK+.
Homepage: http://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: cpp-4.6
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 11490
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Replaces: gcc-4.6 (<< 4.6.1-9)
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.14), libgmp10, libmpc2, libmpfr4 (>= 3.1.0), zlib1g (>= 1:1.1.4)
Suggests: gcc-4.6-locales (>= 4.6.3-1)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: procps
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 668
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.2.8-11ubuntu6.3
Replaces: bsdutils (<< 2.9x-1), watch
Provides: watch
Depends: libc6 (>= 2.14), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libtinfo5, upstart-job, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Conflicts: libproc-dev (<< 1:1.2.6-2), pgrep (<< 3.3-5), procps-nonfree, w-bassman (<< 1.0-3), watch
Conffiles:
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.conf d1cb9fea7a813e02111874f040cfc04b
 /etc/init/procps.conf 96170a339d08797dc90d69b01d6bf610
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://procps.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: gstreamer0.10-nice
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libnice
Version: 0.1.1-2ubuntu1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.8), libgstreamer0.10-0 (>= 0.10.15), libnice10 (>= 0.1.0)
Breaks: libgstfarsight0.10-0 (<< 0.0.23)
Description: ICE library (GStreamer plugin)
 Nice is an implementation of the IETF's draft Interactive Connectivity
 Establishment standard (ICE).  ICE is useful for applications that want to
 establish peer-to-peer UDP data streams. It automates the process of
 traversing NATs and provides security against some attacks.
 .
 Existing standards that use ICE include the Session Initiation Protocol (SIP)
 and the Jingle XMPP extension for audio/video calls.
 .
 Nice includes integration with GStreamer.
 .
 This package provides a GStreamer plugin for nice.
Homepage: http://nice.freedesktop.org/
Original-Maintainer: Debian Telepathy maintainers <pkg-telepathy-maintainers@lists.alioth.debian.org>

Package: wpasupplicant
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.7.3-6ubuntu2.2
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.1.1), libnl-3-200 (>= 3.2.3), libnl-genl-3-200 (>= 3.2.3), libpcsclite1, libreadline6 (>= 6.0), libssl1.0.0 (>= 1.0.0), lsb-base (>= 3.0-6), adduser, initscripts (>= 2.88dsf-13.3)
Suggests: wpagui, libengine-pkcs11-openssl
Conffiles:
 /etc/dbus-1/system.d/wpa_supplicant.conf b6e52e30f79834d19db8311417ee0a86
 /etc/wpa_supplicant/functions.sh 550c42ecf41ce2bf299383c50dacdf1c
 /etc/wpa_supplicant/action_wpa.sh 5269e292cd68ebf9698e26d3026e817e
 /etc/wpa_supplicant/ifupdown.sh 4c82dbf7e1d8c5ddd70e40b9665cfeee
Description: client support for WPA and WPA2 (IEEE 802.11i)
 WPA and WPA2 are methods for securing wireless networks, the former
 using IEEE 802.1X, and the latter using IEEE 802.11i. This software
 provides key negotiation with the WPA Authenticator, and controls
 association with IEEE 802.11i networks.
Original-Maintainer: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Homepage: http://w1.fi/wpa_supplicant/

Package: calibre
Status: install ok installed
Priority: extra
Section: text
Installed-Size: 29654
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.8.38+dfsg-1
Depends: python2.7, python-dbus, python-imaging, python-lxml, python-mechanize, python-beautifulsoup, python-pkg-resources, python-cssutils (>= 0.9.7~), python-cherrypy3 (>= 3.1.1), python-dateutil, python-qt4 (>= 4.9-3ubuntu1), python-pyparsing, python-routes, python-chardet, xdg-utils, imagemagick, poppler-utils, ttf-liberation, calibre-bin (>= 0.8.38+dfsg-1)
Recommends: python-dnspython
Conffiles:
 /etc/bash_completion.d/calibre 808d8a9ceed19f02692775814417af3f
Description: e-book converter and library management
 Calibre is meant to be a complete e-library solution. It includes library
 management, format conversion, news feeds to e-book conversion as well as
 e-book reader sync features.
 .
 Calibre is primarily an e-book cataloging program. It manages your e-book
 collection for you. It is designed around the concept of the logical book,
 i.e. a single entry in the database that may correspond to e-books in several
 formats. It also supports conversion from a dozen different e-book formats to
 LRF and EPUB. A graphical interface to the conversion software can be
 accessed easily by just clicking the "Convert E-books" button.
 .
 Supported input formats are: MOBI, LIT, PRC, EPUB, ODT, HTML, CBR, CBZ, RTF,
 TXT, PDF and LRS.
 .
 Calibre has a modular device driver design that makes adding support for
 different e-reader devices easy. At the moment, it has support for the
 SONY PRS 500/505/700 and the iPhone (with the stanza reader software).
 Syncing supports updating metadata on the device from metadata in the library
 and the creation of collections on the device based on the tags defined in
 the library view. If an book has more than one format available, calibre
 automatically chooses the best format when uploading to the device.
 .
 Calibre can automatically fetch news from a number of websites/RSS feeds,
 format the news into a e-book and upload to a connected device. There is
 support for generating LRF/EPUB e-books. The e-books include the *full*
 versions of the articles, not just the summaries.
 .
 Calibre has also a built-in e-book viewer that can display all the major e-book
 formats.
Original-Maintainer: Miriam Ruiz <little_miry@yahoo.es>
Homepage: http://calibre-ebook.com

Package: language-pack-en
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 30
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:12.04+20140106
Replaces: language-pack-en (<< 1:12.04+20140106), language-pack-en-base, language-pack-gnome-en (<< 1:12.04+20140106), language-pack-gnome-en-base (<< 1:12.04+20140106), language-pack-kde-en (<< 1:12.04+20140106), language-pack-kde-en-base (<< 1:12.04+20140106)
Depends: language-pack-en-base (>= 1:12.04+20140106)
Pre-Depends: dpkg (>= 1.10.27ubuntu1)
Description: translation updates for language English
 Translation data updates for all supported packages for:
 English
 .
 language-pack-en-base provides the bulk of translation data
 and is updated only seldom. This package provides frequent translation
 updates.

Package: apturl
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 121
Maintainer: Michael Vogt <mvo@ubuntu.com>
Architecture: amd64
Version: 0.5.1ubuntu3
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), gconf2 (>= 2.28.1-2), apturl-common (= 0.5.1ubuntu3), gnome-icon-theme (>= 2.14.0-1), python-gi, software-properties-gtk, python-aptdaemon.gtk3widgets | synaptic, gir1.2-gtk-3.0, gir1.2-webkit-3.0
Recommends: libgtk2-perl (>= 1:1.130)
Description: install packages using the apt protocol - GTK+ frontend
 AptUrl is a simple graphical application that takes an URL (which follows the
 apt-protocol) as a command line option, parses it and carries out the
 operations that the URL describes (that is, it asks the user if he wants the
 indicated packages to be installed and if the answer is positive does so for
 him).
 .
 This package contains the GTK+ frontend.
Python-Version: 2.7

Package: libgeoip1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: geoip
Version: 1.4.8+dfsg-2
Depends: libc6 (>= 2.8), zlib1g (>= 1:1.1.4)
Recommends: geoip-database
Suggests: geoip-bin
Description: non-DNS IP-to-country resolver library
 GeoIP is a C library that enables the user to find the country that any
 IP address or hostname originates from. It uses a file based database.
 .
 This database simply contains IP blocks as keys, and countries as values and
 it should be more complete and accurate than using reverse DNS lookups.
 .
 This package contains the shared library.
Original-Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: http://www.maxmind.com/

Package: dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.8.1.dfsg.P1-4ubuntu0.8
Replaces: bind, bind9 (<< 1:9.1.0-3)
Depends: libbind9-80 (= 1:9.8.1.dfsg.P1-4ubuntu0.8), libc6 (>= 2.14), libdns81 (= 1:9.8.1.dfsg.P1-4ubuntu0.8), libisc83 (= 1:9.8.1.dfsg.P1-4ubuntu0.8), libisccfg82 (= 1:9.8.1.dfsg.P1-4ubuntu0.8), libkrb5-3 (>= 1.6.dfsg.2), liblwres80 (= 1:9.8.1.dfsg.P1-4ubuntu0.8), bind9-host | host
Suggests: rblcheck
Conflicts: netstd (<< 2.00)
Description: Clients provided with BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers various client programs related to DNS that are
 derived from the BIND source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libgtksourceview-3.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 611
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gtksourceview3
Version: 3.4.2-0ubuntu1
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.32.0), libgtk-3-0 (>= 3.4.0), libpango1.0-0 (>= 1.18.0), libxml2 (>= 2.7.4), libgtksourceview-3.0-common (>= 3.4), libgtksourceview-3.0-common (<< 3.5)
Pre-Depends: multiarch-support
Description: shared libraries for the GTK+ syntax highlighting widget
 GtkSourceView is a text widget that extends the standard GTK+ 3.x text widget
 GtkTextView. It improves GtkTextView by implementing syntax highlighting and
 other features typical of a source editor.
 .
 This package contains the shared libraries required by applications to use
 this widget.
Homepage: http://projects.gnome.org/gtksourceview/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: binfmt-support
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 228
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Version: 2.0.8
Depends: libc6 (>= 2.8), libpipeline1 (>= 1.0.0), upstart-job, lsb-base (>= 3.0-6)
Conffiles:
 /etc/init/binfmt-support.conf 41b3d9b9dce9ed893b799091112a7a5b
Description: Support for extra binary formats
 The binfmt_misc kernel module, contained in versions 2.1.43 and later of the
 Linux kernel, allows system administrators to register interpreters for
 various binary formats based on a magic number or their file extension, and
 cause the appropriate interpreter to be invoked whenever a matching file is
 executed. Think of it as a more flexible version of the #! executable
 interpreter mechanism.
 .
 This package provides an 'update-binfmts' script with which package
 maintainers can register interpreters to be used with this module without
 having to worry about writing their own init.d scripts, and which sysadmins
 can use for a slightly higher-level interface to this module.

Package: libgconf-2-4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 564
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: gconf
Version: 3.2.5-0ubuntu2
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.25.9), gconf2-common (= 3.2.5-0ubuntu2)
Pre-Depends: multiarch-support
Recommends: gconf-service
Breaks: gconf2 (<< 3.2.3-2), libgconf2-4 (<< 3.2.3-2)
Conflicts: libbonobo2-0 (<< 2.24)
Description: GNOME configuration database system (shared libraries)
 GConf is a configuration database system for storing application
 preferences. It supports default or mandatory settings set by the
 administrator, and changes to the database are instantly applied to all
 running applications. It is written for the GNOME desktop but doesn't
 require it.
 .
 This package contains the shared libraries.
Homepage: http://projects.gnome.org/gconf/
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: linux-headers-3.2.0-67-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11083
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 3.2.0-67.101
Provides: linux-headers, linux-headers-3.0
Depends: linux-headers-3.2.0-67, libc6 (>= 2.14)
Description: Linux kernel headers for version 3.2.0 on 64 bit x86 SMP
 This package provides kernel header files for version 3.2.0 on
 64 bit x86 SMP.
 .
 This is for sites that want the latest kernel headers.  Please read
 /usr/share/doc/linux-headers-3.2.0-67/debian.README.gz for details.

Package: wine-gecko1.4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: otherosfs
Installed-Size: 14674
Maintainer: Scott Ritchie <scottritchie@ubuntu.com>
Architecture: amd64
Version: 1.4.0-0ubuntu2
Replaces: wine-gecko, wine1.2-gecko, wine1.3-gecko
Provides: wine-gecko
Pre-Depends: dpkg (>= 1.14.12ubuntu3)
Recommends: wine1.4-amd64
Breaks: wine-gecko (<< 1.4), wine1.2-gecko, wine1.3-gecko
Description: Microsoft Windows compatibility layer (embedded web browser)
 Wine is a compatibility layer for running Windows applications on Linux.
 Applications are run at full speed without the need of cpu emulation. Wine
 does not require Microsoft Windows, however it can use native system dll
 files in place of its own if they are available.
 .
 This package includes the Gecko rendering engine from the Mozilla project for
 displaying embedded web pages in Wine applications.
Homepage: http://www.winehq.org/

Package: wine-gecko1.4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: otherosfs
Installed-Size: 14432
Maintainer: Scott Ritchie <scottritchie@ubuntu.com>
Architecture: i386
Version: 1.4.0-0ubuntu2
Replaces: wine-gecko, wine1.2-gecko, wine1.3-gecko
Provides: wine-gecko
Pre-Depends: dpkg (>= 1.14.12ubuntu3)
Recommends: wine1.4-i386
Breaks: wine-gecko (<< 1.4), wine1.2-gecko, wine1.3-gecko
Description: Microsoft Windows compatibility layer (embedded web browser)
 Wine is a compatibility layer for running Windows applications on Linux.
 Applications are run at full speed without the need of cpu emulation. Wine
 does not require Microsoft Windows, however it can use native system dll
 files in place of its own if they are available.
 .
 This package includes the Gecko rendering engine from the Mozilla project for
 displaying embedded web pages in Wine applications.
Homepage: http://www.winehq.org/

Package: ibus-gtk
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: utils
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ibus
Version: 1.4.1-3ubuntu1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libgtk2.0-0 (>= 2.24.5-4), libibus-1.0-0, libpango1.0-0 (>= 1.14.0)
Description: Intelligent Input Bus - GTK+2 support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GTK+2 IM module.
Homepage: http://code.google.com/p/ibus/
Original-Maintainer: IME Packaging Team <pkg-ime-devel@lists.alioth.debian.org>

Package: unar
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 3852
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.99-1
Replaces: theunarchiver
Provides: theunarchiver
Depends: gnustep-base-runtime (>= 1.22.1), libbz2-1.0, libc6 (>= 2.11), libgcc1 (>= 1:4.1.1), libgnustep-base1.22 (>= 1.22.1), libicu48 (>= 4.8-1), libobjc3 (>= 4.2.1), libssl1.0.0 (>= 1.0.0), libstdc++6 (>= 4.1.1), libwavpack1 (>= 4.40.0), zlib1g (>= 1:1.2.0)
Conflicts: theunarchiver
Description: Unarchiver for a variety of file formats
 The Unarchiver is an archive unpacker program with support for the popular
 zip, RAR, 7z, tar, gzip, bzip2, LZMA, XZ, CAB, MSI, NSIS, EXE, ISO, BIN, and
 split file formats, as well as the old Stuffit, Stuffit X, DiskDouble, Compact
 Pro, Packit, cpio, compress (.Z), ARJ, ARC, PAK, ACE, ZOO, LZH, ADF, DMS, LZX,
 PowerPacker, LBR, Squeeze, Crunch, and other old formats.
 .
 This package contains the lsar tool which lists the contents of archives and
 the unar tool which extracts those contents.
Original-Maintainer: Matt Kraai <kraai@debian.org>
Homepage: http://wakaba.c3.cx/s/apps/unarchiver.html

Package: libllvm3.0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 21966
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: llvm-3.0
Version: 3.0-4ubuntu1
Depends: libc6 (>= 2.11), libffi6 (>= 3.0.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: Low-Level Virtual Machine (LLVM), runtime library
 The Low-Level Virtual Machine (LLVM) is a collection of libraries and
 tools that make it easy to build compilers, optimizers, Just-In-Time
 code generators, and many other compiler-related programs.
 .
 This package contains the LLVM runtime library.
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Homepage: http://www.llvm.org/

Package: libllvm3.0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 19796
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: llvm-3.0
Version: 3.0-4ubuntu1
Depends: libc6 (>= 2.11), libffi6 (>= 3.0.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: Low-Level Virtual Machine (LLVM), runtime library
 The Low-Level Virtual Machine (LLVM) is a collection of libraries and
 tools that make it easy to build compilers, optimizers, Just-In-Time
 code generators, and many other compiler-related programs.
 .
 This package contains the LLVM runtime library.
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Homepage: http://www.llvm.org/

Package: libqtgui4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 12476
Maintainer: Kubuntu Developers <kubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Source: qt4-x11
Version: 4:4.8.1-0ubuntu4.8
Replaces: libqt4-core (<< 4.0.1-3), libqt4-designer (<< 4.4.0~beta1-1), libqt4-gui (<< 4.4.0), qt4-designer (<< 4.1.4)
Depends: fontconfig, libaudio2, libc6 (>= 2.15), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.3.5), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libice6 (>= 1:1.0.0), libjpeg8 (>= 8c), libmng1 (>= 1.0.10), libpng12-0 (>= 1.2.13-4), libqt4-declarative (= 4:4.8.1-0ubuntu4.8), libqtcore4 (= 4:4.8.1-0ubuntu4.8), libsm6, libstdc++6 (>= 4.1.1), libtiff4, libx11-6 (>= 2:1.2.99.901), libxext6, libxi6 (>= 2:1.2.99.4), libxrender1, zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Recommends: libcups2
Suggests: qt4-qtconfig
Breaks: libqt4-core (<< 4.0.1-3), libqt4-designer (<< 4.4.0~beta1-1), libqt4-gui (<< 4.4.0), qt4-designer (<< 4.1.4)
Description: Qt 4 GUI module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtGui module extends QtCore with GUI functionality.
Homepage: http://qt.nokia.com/
Original-Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>

Package: libboost-system1.54.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.54
Version: 1.54.0-2ubuntu3~precise1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Description: Operating system (e.g. diagnostics support) library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost System library provides simple, light-weight error_code
 objects that encapsulate system-specific error code values, yet also
 provide access to more abstract and portable error conditions via
 error_condition objects. Because error_code objects can represent
 errors from sources other than the operating system, including
 user-defined sources, each error_code and error_condition has an
 associated error_category.
Homepage: http://www.boost.org/libs/system/
Original-Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>

Package: libspeex1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: speex
Version: 1.2~rc1-3ubuntu2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Suggests: speex
Conflicts: asterisk (<= 1:1.4.18.1~dfsg-1), libiaxclient1 (<= 2.0.2-1), libmediastreamer0 (<= 2.1.0-1), libopal-2.2 (<= 2.2.11~dfsg1-3), libopal-2.2-develop (<= 2.2.11~dfsg1-3), libopal-2.2-ptrace (<= 2.2.11~dfsg1-3), libopal-2.2.0
Description: The Speex codec runtime library
 Speex is an audio codec especially designed for compressing voice at low
 bit-rates for applications such as voice over IP (VoIP). In some senses,
 it is meant to be complementary to the Vorbis codec which places a greater
 emphasis on high-quality music reproduction.
 .
 This package provides the speex runtime library.
Homepage: http://www.speex.org/
Original-Maintainer: Ron Lee <ron@debian.org>

Package: libgssapi-krb5-2
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 331
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.5
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.5), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libkrb53 (<< 1.8)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libgssapi-krb5-2
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.5
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.7), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.5), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libkrb53 (<< 1.8)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libxcb-util0
Status: install ok installed
Multi-Arch: same
Priority: extra
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xcb-util
Version: 0.3.8-2
Depends: libc6 (>= 2.8), libxcb1
Pre-Depends: multiarch-support
Description: utility libraries for X C Binding -- atom, aux and event
 This package contains the library files needed to run software using
 libxcb-util.
 .
 The xcb-util module provides a number of libraries which sit on top of
 libxcb, the core X protocol library, and some of the extension
 libraries. These experimental libraries provide convenience functions
 and interfaces which make the raw X protocol more usable. Some of the
 libraries also provide client-side code which is not strictly part of
 the X protocol but which have traditionally been provided by Xlib.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: http://xcb.freedesktop.org

Package: libsox-fmt-oss
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: sox
Version: 14.3.2-3
Depends: libc6 (>= 2.2.5), libsox1b (>= 14.3.1)
Description: SoX OSS format I/O library
 SoX is the swiss army knife of sound processing.
 .
 This package contains the SoX Open Sound System (OSS)
 format I/O library.
 .
 Open Sound System: http://www.opensound.com/oss.html
Original-Maintainer: Pascal Giard <pascal@debian.org>
Homepage: http://sox.sourceforge.net

Package: mscompress
Status: install ok installed
Priority: extra
Section: otherosfs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.3-3.1
Depends: libc6 (>= 2.4)
Description: Microsoft "compress.exe/expand.exe" compatible (de)compressor
 This package contains two programs:
 .
  * msexpand which decompresses files compressed by the Microsoft
    compress.exe utility (e.g. Win 3.x installation files);
  * mscompress which compresses files using the LZ77 compression
    algorithm.
 .
 Files can be decompressed using Microsoft expand.exe or msexpand(1).
Original-Maintainer: Aurélien GÉRÔME <ag@roxor.cx>

Package: python-minimal
Essential: yes
Status: install ok installed
Multi-Arch: allowed
Priority: required
Section: python
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-defaults
Version: 2.7.3-0ubuntu2.2
Replaces: python (<= 2.4-1), python2.7 (<< 2.7.3)
Depends: python2.7-minimal (>= 2.7.3), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.4-1), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python-ibus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ibus
Version: 1.4.1-3ubuntu1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-gtk2, python-dbus (>= 0.83.0), iso-codes
Description: Intelligent Input Bus - Python support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the Python binding.
Homepage: http://code.google.com/p/ibus/
Original-Maintainer: IME Packaging Team <pkg-ime-devel@lists.alioth.debian.org>

Package: libdvdread4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 195
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdvdread
Version: 4.2.0-1ubuntu4
Depends: libc6 (>= 2.14)
Recommends: libdvdnav4
Suggests: libdvdcss2, wget, debhelper, fakeroot, build-essential
Description: library for reading DVDs
 libdvdread provides the functionality that is required to access many DVDs. It
 parses IFO files, reads NAV-blocks, and performs CSS authentication and
 descrambling.
 .
 libdvdread probes for libdvdcss at runtime and if found, will use it to
 decrypt sections of the DVD as necessary. libdvdcss needs to be installed from
 third-party repositories (see README.Debian), it's not included in Debian.
Homepage: http://dvdnav.mplayerhq.hu/
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>

Package: libwildmidi1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: wildmidi
Version: 0.2.3.4-2.1precise1
Replaces: libwildmidi0
Depends: libwildmidi-config, libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: software MIDI player library
 MIDI streaming library designed to process a MIDI file and stream the results
 as stereo audio data through a buffer which an external program can then
 process further.
Original-Maintainer: Emmet Hikory <emmet.hikory@gmail.com>
Homepage: http://wildmidi.sourceforge.net/

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 305
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: fuse
Version: 2.8.6-2ubuntu2
Depends: libc6 (>= 2.14)
Suggests: fuse
Conflicts: fuse (<< 2.8.6-2ubuntu2)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: http://fuse.sourceforge.net/
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>

Package: libwpg-0.3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: amd64
Source: libwpg
Version: 0.3.0-1~precise1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), librevenge-0.0-0, libstdc++6 (>= 4.1.1), libwpd-0.10-10
Description: WordPerfect graphics import/convert library (shared library)
 Libwpg is a collection of library and tools to work with graphics in WPG
 (WordPerfect Graphics) format. WPG is the format used among others in Corel
 sofware, such as WordPerfect(tm) and Presentations(tm).
 .
 This package contains the shared library.

Package: apt-xapian-index
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.44ubuntu5.1
Depends: python (>= 2.7.1-0ubuntu2), python-xapian (>= 1.0.2), python-apt (>= 0.7.93.2), python-debian (>= 0.1.14), python2.7, python (<< 2.8)
Suggests: app-install-data, python-xdg
Conffiles:
 /etc/cron.weekly/apt-xapian-index ed6e0c144a86d68700c7d94e162586d9
 /etc/bash_completion.d/axi-cache 1e4422693e415e04abec46bb904d2af0
 /etc/dbus-1/system.d/org.debian.AptXapianIndex.conf b359f873abac01da9320401d24f6c445
Description: maintenance and search tools for a Xapian index of Debian packages
 This package provides update-apt-xapian-index, a tool to maintan a Xapian
 index of Debian package information in /var/lib/apt-xapian-index, and
 axi-cache, a command line search tool that uses the index.
 .
 axi-cache allows to search packages very quickly, and it also interfaces with
 the shell command line completion in a smart way, providing context-sensitive
 keyword and tag suggestions even before the search command is actually run.
 .
 update-apt-xapian-index allows plugins to be installed in
 /usr/share/apt-xapian-index to index all sorts of extra information, such as
 Debtags tags, popcon information, package ratings and anything else that would
 fit.
 .
 The index generated by update-apt-xapian-index is self-documenting, as it
 contains an autogenerated README file with information on the index layout and
 all the data that can be found in it.
Homepage: http://www.enricozini.org/sw/apt-xapian-index/
Original-Maintainer: Enrico Zini <enrico@debian.org>

Package: thunderbird-locale-en
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 579
Maintainer: Ubuntu Mozilla Team <ubuntu-mozillateam@lists.ubuntu.com>
Architecture: amd64
Source: thunderbird
Version: 1:31.0+build1-0ubuntu0.12.04.1
Depends: thunderbird (>= 1:31.0+build1-0ubuntu0.12.04.1), thunderbird (<< 1:31.0+build1-0ubuntu0.12.04.1.1~)
Description: English language pack for Thunderbird
 This package contains English translations and search plugins
 for Thunderbird

Package: libv4l-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: v4l-utils
Version: 0.8.6-1ubuntu2
Depends: libv4lconvert0 (= 0.8.6-1ubuntu2), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Collection of video4linux support libraries
 libv4l is a collection of libraries which adds a thin abstraction layer on
 top of video4linux2 devices. The purpose of this (thin) layer is to make it
 easy for application writers to support a wide variety of devices without
 having to write separate code for different devices in the same class. libv4l
 consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
 .
 libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
 of the drivers for those devices supporting v4l1 compatibility (which many
 v4l2 drivers do not).
 .
 libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
 application transparent libv4lconvert conversion where necessary.
 .
 This package contains the shared libraries.
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Homepage: http://linuxtv.org/downloads/v4l-utils/

Package: libv4l-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: v4l-utils
Version: 0.8.6-1ubuntu2
Depends: libv4lconvert0 (= 0.8.6-1ubuntu2), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Collection of video4linux support libraries
 libv4l is a collection of libraries which adds a thin abstraction layer on
 top of video4linux2 devices. The purpose of this (thin) layer is to make it
 easy for application writers to support a wide variety of devices without
 having to write separate code for different devices in the same class. libv4l
 consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
 .
 libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
 of the drivers for those devices supporting v4l1 compatibility (which many
 v4l2 drivers do not).
 .
 libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
 application transparent libv4lconvert conversion where necessary.
 .
 This package contains the shared libraries.
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Homepage: http://linuxtv.org/downloads/v4l-utils/

Package: ubuntu-extras-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 48
Maintainer: Michael Vogt <michael.vogt@canonical.com>
Architecture: all
Version: 2010.09.27
Depends: apt, gnupg
Description: GnuPG keys of the Ubuntu extras archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for the extras.ubuntu.com repository.

Package: python-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 563
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: zope.interface
Version: 3.6.1-1ubuntu3
Replaces: python-zope, python-zopeinterface
Provides: python-zope, python-zopeinterface, python2.7-zope.interface
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-pkg-resources, libc6 (>= 2.2.5)
Conflicts: python-zope, python-zopeinterface, zope3
Description: Interfaces for Python
 This package provides an implementation of object interfaces for Python.
 Interfaces are a mechanism for labeling objects as conforming to a given API
 or contract. So, this package can be considered as implementation of the
 Design By Contract methodology support in Python.
Original-Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Homepage: http://pypi.python.org/pypi/zope.interface

Package: tcl8.5
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 3703
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.5.11-1ubuntu1
Provides: tclsh
Depends: libc6 (>= 2.7)
Suggests: tclreadline
Conflicts: tcl74 (<= 7.4p3-2)
Description: Tcl (the Tool Command Language) v8.5 - run-time files
 Tcl is a powerful, easy to use, embeddable, cross-platform interpreted
 scripting language.  This package contains everything you need to run
 Tcl scripts and Tcl-enabled apps.  This version includes thread support.
Homepage: http://www.tcl.tk/
Original-Maintainer: Tcl/Tk Debian Packagers <pkg-tcltk-devel@lists.alioth.debian.org>

Package: ruby-goocanvas
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 205
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ruby-gnome2
Version: 1.0.3-1build1
Replaces: libgoocanvas-ruby (<< 0.90.9-1~), libgoocanvas-ruby1.8 (<< 0.90.9-1~)
Provides: libgoocanvas-ruby, libgoocanvas-ruby1.8
Depends: libc6 (>= 2.2.5), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.12.0), libgoocanvas3 (>= 0.15), libgtk2.0-0 (>= 2.8.0), libruby1.8 (>= 1.8.7.352), libruby1.9.1 (>= 1.9.2.0), ruby-gtk2 (= 1.0.3-1build1)
Breaks: libgoocanvas-ruby (<< 0.90.9-1~), libgoocanvas-ruby1.8 (<< 0.90.9-1~)
Description: GooCanvas bindings for the Ruby language
 GooCanvas is a canvas widget for GTK+ that uses the cairo 2D library.
 This package contains libraries for using the GtkSourceView2 text widget
 with syntax highlighting and other features typical of a source code
 editor in the Ruby programming language.
Original-Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: http://ruby-gnome2.sourceforge.jp/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ncurses
Version: 5.9-4
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: wamerican
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 990
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: scowl
Version: 7.1-1
Provides: wordlist
Depends: debconf (>= 0.5) | debconf-2.0
Description: American English dictionary words for /usr/share/dict
 This package provides the file /usr/share/dict/american-english
 containing a list of English words with American spellings.
 This list can be used by spelling checkers, and by programs such
 as look(1).
 .
 There are also -small, -large, and -huge versions of this word list,
 and there are wbritish* and wcanadian* packages as well.
Original-Maintainer: Don Armstrong <don@debian.org>
Homepage: http://wordlist.sourceforge.net/

Package: linux-headers-3.2.0-65
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 55042
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Source: linux
Version: 3.2.0-65.99
Provides: linux-headers, linux-headers-3
Depends: coreutils | fileutils (>= 4.0)
Description: Header files related to Linux kernel version 3.2.0
 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.2.0-65/debian.README.gz for details

Package: linux-headers-3.2.0-64
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 55038
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Source: linux
Version: 3.2.0-64.97
Provides: linux-headers, linux-headers-3
Depends: coreutils | fileutils (>= 4.0)
Description: Header files related to Linux kernel version 3.2.0
 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.2.0-64/debian.README.gz for details

Package: linux-headers-3.2.0-67
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 55043
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Source: linux
Version: 3.2.0-67.101
Provides: linux-headers, linux-headers-3
Depends: coreutils | fileutils (>= 4.0)
Description: Header files related to Linux kernel version 3.2.0
 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.2.0-67/debian.README.gz for details

Package: libgraphite2-3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: graphite2
Version: 1.2.4-1ubuntu1~precise1
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Original-Maintainer: Debian LibreOffice Team <debian-openoffice@lists.debian.org>

Package: linux-headers-3.2.0-68
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 55051
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Source: linux
Version: 3.2.0-68.102
Provides: linux-headers, linux-headers-3
Depends: coreutils | fileutils (>= 4.0)
Description: Header files related to Linux kernel version 3.2.0
 This package provides kernel header files for version 3.2.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-3.2.0-68/debian.README.gz for details

Package: python-reportlab
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.5-1.1build1
Replaces: python2.3-reportlab, python2.4-reportlab
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Recommends: python-reportlab-accel, python-renderpm, python-imaging (>= 1.1.6)
Suggests: pdf-viewer, python-egenix-mxtexttools (>= 2.0.6-3.1), python-reportlab-doc
Conflicts: python2.3-reportlab, python2.4-reportlab
Description: ReportLab library to create PDF documents using Python
 ReportLab is a library that lets you directly create documents in
 Adobe's Portable Document Format (PDF) using the Python programming language.
 .
 ReportLab library creates PDF based on graphics commands without
 intervening steps. It's therefore extremely fast, and flexible (since
 you're using a full-blown programming language).
 .
 Sample use cases are:
   * Dynamic PDF generation on the web
   * High-volume corporate reporting and database publishing
   * As embeddable print engine for other applications, including a
     'report language' so that users can customize their own reports.
   * As 'build system' for complex documents with charts, tables and text
     such as management accounts, statistical reports and scientific papers
   * from XML to PDF in one step
Original-Maintainer: Matthias Klose <doko@debian.org>
Python-Version: 2.7

Package: libindicator-messages-status-provider1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: indicator-messages
Version: 0.6.0-0ubuntu2
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.14.0)
Description: indicator status provider - shared library
 This library contains information to build status providers to go into
 the messaging menu.
Homepage: https://launchpad.net/indicator-messages
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>

Package: libpopt0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: popt
Version: 1.16-3ubuntu1
Replaces: popt
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/
Original-Maintainer: Paul Martin <pm@debian.org>

Package: libpeas-common
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libpeas
Version: 1.2.0-1ubuntu1
Replaces: libpeas-1.0-0 (<< 0.7.0-1)
Description: Application plugin library (common files)
 libpeas is a library that allows applications to support plugins.
 .
 This package contains common files, such as translations and icons.
Homepage: http://live.gnome.org/Libpeas
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libpam0g
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam0g-util
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: gstreamer0.10-plugins-bad-multiverse
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Sebastian Dröge <slomo@ubuntu.com>, Onkar Shinde <onkarshinde@ubuntu.com>
Architecture: amd64
Source: gst-plugins-bad-multiverse0.10
Version: 0.10.21-1
Depends: libc6 (>= 2.2.5), libfaac0 (>= 1.26), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.14.0), libgstreamer-plugins-base0.10-0 (>= 0.10.32), libgstreamer0.10-0 (>= 0.10.32), libmjpegtools-1.9 (>= 1:1.9.0), libstdc++6 (>= 4.1.1), libxml2 (>= 2.6.27), libxvidcore4 (>= 1.2.2)
Description: GStreamer plugins from the "bad" set (Multiverse Variant)
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
Gstreamer-Elements: faac, mpeg2enc, mplex, xviddec, xvidenc
Gstreamer-Encoders: audio/mpeg, mpegversion=(int){ 4, 2 }, stream-format=(string){ adts, raw }; video/mpeg, systemstream=(boolean)false, mpegversion=(int){ 1, 2, 4 }; video/mpeg, systemstream=(boolean)true; video/x-xvid
Gstreamer-Version: 0.10

Package: libxcb-randr0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxcb
Version: 1.8.1-1ubuntu0.2
Depends: libc6 (>= 2.2.5), libxcb1
Pre-Depends: multiarch-support
Description: X C Binding, randr extension
 This package contains the library files needed to run software using
 libxcb-randr, the randr extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org
Original-Maintainer: XCB Developers <xcb@lists.freedesktop.org>

Package: nspluginviewer
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: nspluginwrapper
Version: 1.4.4-0ubuntu4
Replaces: nspluginwrapper (<< 1.4.4-0ubuntu2)
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.0), libx11-6, libxt6
Description: A wrapper to run Netscape plugins on other architectures
 nspluginwrapper is an Open Source compatibility plugin for Netscape 4
 (NPAPI) plugins. That is, it enables you to use plugins on platforms
 they were not built for.
 .
 This package is built to run i386 plugins, since there are no known
 binary-only plugins built for any other architecture.
Original-Maintainer: Rob Andrews <rob@choralone.org>

Package: libpci3
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pciutils
Version: 1:3.1.8-2ubuntu6
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: xfburn
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 2252
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 0.5.0-0ubuntu1~ppa0.12.04.1
Depends: libburn4 (>= 1.1.8), libc6 (>= 2.4), libexo-1-0 (>= 0.5.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgstreamer-plugins-base0.10-0 (>= 0.10.12), libgstreamer0.10-0 (>= 0.10.0), libgtk2.0-0 (>= 2.14.0), libgudev-1.0-0 (>= 147), libisofs6 (>= 1.1.6), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0)
Description: CD-burner application for Xfce Desktop Environment
 Xfburn is a tool to help burning CDs and DVDs. It fits well in the Xfce
 Desktop Environment but can be used anywhere.
 .
 It's currently in development so some features may be missing, but it's
 already able to burn data.
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: libportmidi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: portmidi
Version: 1:200-0ubuntu1.12.04.2
Depends: libasound2 (>= 1.0.23), libc6 (>= 2.14)
Description: library for real-time MIDI input/output
 PortMidi is a platform independent library for MIDI input/output.
 This package provide the PortMidi and PortTime libraries.
Homepage: http://portmedia.sourceforge.net/
Original-Maintainer: Paul Brossier <piem@debian.org>

Package: autotools-dev
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: devel
Installed-Size: 181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 20120210.1ubuntu1
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
 This package installs an up-to-date version of config.guess and
 config.sub, used by the automake and libtool packages.  It provides
 the canonical copy of those files for other packages as well.
 .
 It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
 best practices and guidelines for using autoconf, automake and
 friends on Debian packages.  This is a must-read for any developers
 packaging software that uses the GNU autotools, or GNU gettext.
 .
 Additionally this package provides seamless integration into Debhelper
 or CDBS, allowing maintainers to easily update config.{guess,sub} files
 in their packages.
Homepage: http://savannah.gnu.org/projects/config/
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>

Package: libusb-0.1-4
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libusb
Version: 2:0.1.12-20
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: libusb-0.1-4
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libusb
Version: 2:0.1.12-20
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: libpython2.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3063
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python2.7
Version: 2.7.3-0ubuntu3.5
Replaces: python2.7 (<< 2.6)
Depends: python2.7 (= 2.7.3-0ubuntu3.5), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 2.7)
 Version 2.7 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the shared runtime library, normally not needed
 for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libavc1394-0
Status: install ok installed
Multi-Arch: same
Priority: extra
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libavc1394
Version: 0.5.3-1ubuntu2
Depends: libc6 (>= 2.7), libraw1394-11
Pre-Depends: multiarch-support
Description: control IEEE 1394 audio/video devices
 libavc1394 is a programming interface for the 1394 Trade Association AV/C
 (Audio/Video Control) Digital Interface Command Set. It allows you to
 remote control camcorders and similar devices connected to your computer
 via an IEEE 1394 (aka Firewire) link.
 .
 This package includes the libraries needed to run executables using
 libavc1394.
Original-Maintainer: Daniel Kobras <kobras@debian.org>

Package: libgpg-error0
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgpg-error
Version: 1.10-2ubuntu1
Depends: libc6 (>= 2.2.5)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/
Original-Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>

Package: libgpg-error0
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libgpg-error
Version: 1.10-2ubuntu1
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/
Original-Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 22.15-2ubuntu1.1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: microcode.ctl
Status: install ok installed
Priority: optional
Section: contrib/utils
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.17-13.1ubuntu2
Replaces: microcode-ctl
Depends: module-init-tools, udev | makedev (>> 2.3.1-53), python (>= 2.6), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.7)
Recommends: wget, intel-microcode
Conffiles:
 /etc/init.d/microcode.ctl 5bd981c4963a4576f6086ae3df09afbe
Description: Intel IA32/IA64 CPU Microcode Utility
 The microcode_ctl utility is a companion to the IA32 microcode
 driver:
 .
  - it decodes and sends new microcode to the kernel driver for Intel IA32
    family (Pentium Pro, PII, Celeron, PIII, Xeon, Pentium 4, etc.) and
    Intel x86_64 family processors;
  - it signals the kernel driver to release any buffers it may hold.
 .
 The microcode update does not permanently alter the CPU and must be
 performed each time the system is booted.
Homepage: http://www.urbanmyth.org/microcode/
Original-Maintainer: Giacomo Catenazzi <cate@debian.org>

Package: libdbusmenu-glib4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdbusmenu
Version: 0.6.2-0ubuntu0.2
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.31.8)
Pre-Depends: multiarch-support
Breaks: gir1.2-indicate-0.5 (<< 0.5.0-0ubuntu4), gir1.2-unity-3.0 (<< 3.8.4-0ubuntu2), indicator-messages (<< 0.3.0), indicator-session (<< 0.2.0), libdbusmenu-glib0
Description: library for passing menus over DBus
 libdbusmenu passes a menu structure across DBus so that a program can
 create a menu simply without worrying about how it is displayed on the
 other side of the bus.
 .
 This package contains shared libraries to be used by applications.
Homepage: https://launchpad.net/dbusmenu
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0025+nmu2ubuntu1
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File: preserve user changes to config files.
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>

Package: avahi-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: avahi
Version: 0.6.30-5ubuntu2.1
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.22), libc6 (>= 2.4), libgdbm3 (>= 1.8.3), avahi-daemon
Description: Avahi browsing, publishing and discovery utilities
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration.  For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains several utilities that allow you to interact with
 the Avahi daemon, including publish, browsing and discovering services.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: gir1.2-atspi-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: at-spi2-core
Version: 2.4.2-0ubuntu0.1
Replaces: gir1.0-gtk-2.0 (<< 2.22), gobject-introspection-repository
Depends: gir1.2-glib-2.0, libatspi2.0-0
Description: Assistive Technology Service Provider (GObject introspection)
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings
Homepage: http://live.gnome.org/Accessibility/GNOME3
Original-Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 14086
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: perl
Version: 5.14.2-6ubuntu2.4
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl (>= 5.14.2-1), libswitch-perl, libclass-isa-perl
Suggests: libpod-plainer-perl
Breaks: libansicolor-perl (<< 3.00), libarchive-tar-perl (<< 1.76), libattribute-handlers-perl (<< 0.89), libautodie-perl (<< 2.10.01), libcgi-pm-perl (<< 3.52), libcpan-meta-perl (<< 2.110440), libcpan-meta-yaml-perl (<< 0.003), libcpanplus-perl (<< 0.9103), libdigest-perl (<< 1.16), libextutils-cbuilder-perl (<< 0.280203), libextutils-command-perl (<< 1.17), libextutils-install-perl (<< 1.56), libextutils-parsexs-perl (<< 2.221000), libfile-path-perl (<< 2.08.01), libfile-spec-perl (<< 3.3300), libfile-temp-perl (<< 0.22), libhttp-tiny-perl (<< 0.012), libi18n-langtags-perl (<< 0.35.01), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27105), liblocale-codes-perl (<< 3.16), liblocale-maketext-perl (<< 1.19), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.994), libmath-complex-perl (<< 1.56), libmodule-build-perl (<< 0.380000), libmodule-corelist-perl (<< 2.49.02), libmodule-load-conditional-perl (<< 0.44), libmodule-load-perl (<< 0.18), libmodule-metadata-perl (<< 1.000004), libmodule-pluggable-perl (<< 3.9), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.38), libparams-check-perl (<< 0.28), libparent-perl (<< 0.225), libparse-cpan-meta-perl (<< 1.4401), libperl-ostype-perl (<< 1.002), libpod-escapes-perl (<< 1.04), libpod-parser-perl (<< 1.37), libpod-simple-perl (<< 3.16), libshell-perl (<< 0.72.01), libtest-harness-perl (<< 3.23), libtest-simple-perl (<< 0.98), libthread-queue-perl (<< 2.12), libtime-local-perl (<< 1.2000), libunicode-collate-perl (<< 0.73), libversion-perl (<< 1:0.8800), libversion-requirements-perl (<< 0.101020), podlators-perl (<< 2.3.1)
Conflicts: doc-base (<< 0.10.3), libxml-sax-perl (<< 0.99+dfsg-1ubuntu0.1), mono-gac (<< 2.10.8.1-1)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: bsdutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 196
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: util-linux (2.20.1-1ubuntu3.1)
Version: 1:2.20.1-1ubuntu3.1
Depends: libc6 (>= 2.7)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system: logger, renice, script, scriptreplay, and wall.
 The remaining standard BSD utilities are provided by bsdmainutils.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: gedit-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 4728
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: all
Source: gedit
Version: 3.4.1-0ubuntu1
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: gedit
Description: official text editor of the GNOME desktop environment (support files)
 gedit is a text editor which supports most standard editor features,
 extending this basic functionality with other features not usually
 found in simple text editors.
 .
 This package contains gedit's architecture-independent support files.
Homepage: http://www.gnome.org/projects/gedit/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: tumbler-common
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 816
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: all
Source: tumbler
Version: 0.1.24-0ubuntu1
Suggests: libtumbler-1-0
Description: D-Bus thumbnailing service (common files)
 Tumbler is a D-Bus service for applications to request thumbnails for various
 URI schemes and MIME types. It is an implementation of the thumbnail management
 D-Bus specification described on http://live.gnome.org/ThumbnailerSpec.
Homepage: http://www.xfce.org/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: libwebkitgtk-3.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: webkit
Version: 1.8.3-0ubuntu0.12.04.1
Description: Web content engine library for GTK+ - data files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
 .
 This package provides the data files needed by the library.
Homepage: http://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.6ubuntu2
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: catfish
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 312
Maintainer: Cody A.W. Somerville <cody-somerville@ubuntu.com>
Architecture: all
Version: 0.3.2-2ubuntu1
Depends: python (>= 2.7.1-0ubuntu2), python-gtk2 (>= 2.6), python-glade2, python-gobject
Recommends: python-xdg
Suggests: python-dbus, strigi-daemon, doodle, tracker, beagle
Description: file search tool that support several different engines
 A file search tool using different backends which is configurable via
 the command line.
 .
 This program acts as a frontend for different file search engines.
 The interface is intentionally lightweight and simple. But it takes
 configuration options from the command line.
 .
 Currently find, locate, tracker, strigi, pinot, and beagle are
 supported as backends.
Homepage: http://software.twotoasts.de/index.php?/pages/catfish_summary.html

Package: iw
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.2-1
Replaces: aircrack-ng (<< 1:1.0~rc2-1)
Depends: libc6 (>= 2.7), libnl-3-200 (>= 3.2.3), libnl-genl-3-200 (>= 3.2.3)
Recommends: crda
Breaks: aircrack-ng (<< 1:1.0~rc2-1)
Description: tool for configuring Linux wireless devices
 This package contains the `iw' tool which allows you to configure and show
 information about wireless networking.
 .
 In the future iw will become the canonical command line tool for wireless
 configuration and iwconfig/wireless-tools will no longer be required. See
 /usr/share/doc/iw/README.Debian for a more detailed overview of iw.
Original-Maintainer: Debian/Ubuntu wpasupplicant Maintainers <pkg-wpa-devel@lists.alioth.debian.org>
Homepage: http://wireless.kernel.org/en/users/Documentation/iw

Package: colord
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: graphics
Installed-Size: 472
Maintainer: Christopher James Halse Rogers <raof@ubuntu.com>
Architecture: amd64
Version: 0.1.16-2ubuntu0.1
Depends: libc6 (>= 2.4), libcolord1 (>= 0.1.13), libdbus-1-3 (>= 1.0.2), libglib2.0-0 (>= 2.28.0), libgudev-1.0-0 (>= 147), liblcms2-2 (>= 2.2+git20110628-2), libpolkit-gobject-1-0 (>= 0.99), libsane (>= 1.0.11-3), libsqlite3-0 (>= 3.5.9), adduser, acl, policykit-1 (>= 0.103)
Pre-Depends: multiarch-support
Conffiles:
 /etc/colord.conf b556357c0d1a1dbe22c811955c5891a4
 /etc/dbus-1/system.d/org.freedesktop.ColorManager.conf e3cffb32185110411f054b965600c379
Description: system service to manage device colour profiles -- system daemon
 colord is a system service that makes it easy to manage, install and generate
 colour profiles to accurately colour manage input and output devices.
 .
 It provides a D-Bus API for system frameworks to query, a persistent data
 store, and a mechanism for session applications to set system policy.
 .
 This package contains the dbus-activated colord system daemon.
Homepage: http://www.freedesktop.org/software/colord/

Package: libxapian22
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xapian-core
Version: 1.2.8-1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: xapian-tools
Description: Search engine library
 This package contains the core Xapian runtime library.
 .
 The Xapian search engine library is a highly adaptable toolkit which allows
 developers to easily add advanced indexing and search facilities to their own
 applications.  It implements the probabilistic model of information retrieval,
 and provides facilities for performing ranked free-text searches, relevance
 feedback, phrase searching, boolean searching, stemming, and simultaneous
 update and searching.  It is highly scalable, and is capable of working with
 collections containing hundreds of millions of documents.
Original-Maintainer: Olly Betts <olly@survex.com>
Homepage: http://xapian.org/

Package: python-mako
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 335
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: mako
Version: 0.5.0-1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-markupsafe
Suggests: python-beaker (>= 1.1), python-mako-doc
Enhances: python-pygments, python-pylons, python-turbogears
Description: fast and lightweight templating for the Python platform
 Mako is a template library written in Python. It provides a familiar, non-XML
 syntax which compiles into Python modules for maximum performance. Mako's
 syntax and API borrows from the best ideas of many others, including Django
 templates, Cheetah, Myghty, and Genshi. Conceptually, Mako is an embedded
 Python (i.e. Python Server Page) language, which refines the familiar ideas of
 componentized layout and inheritance to produce one of the most
 straightforward and flexible models available, while also maintaining close
 ties to Python calling and scoping semantics.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: http://www.makotemplates.org/
Python-Version: 2.7

Package: libqt4-sql-sqlite
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Kubuntu Developers <kubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Source: qt4-x11
Version: 4:4.8.1-0ubuntu4.8
Depends: libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libqt4-sql (= 4:4.8.1-0ubuntu4.8), libqtcore4 (= 4:4.8.1-0ubuntu4.8), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.1.1)
Pre-Depends: multiarch-support
Suggests: libqt4-dev
Description: Qt 4 SQLite 3 database driver
 This package contains the SQLite 3 plugin for Qt 4.
 .
 Install it if you intend to use or write Qt programs that are to access an
 SQLite 3 DB.
Homepage: http://qt.nokia.com/
Original-Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>

Package: python-defer
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.2+bzr481-1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Suggests: python-dbus
Description: Small framework for asynchronous programming
 The defer module provides an easy way to write asynchrouns Python programs.
 It is greatly inspired by Twisted's defer, but hasn't got any external
 dependencies.
 .
 Furthermore it features decorators to write asynchronous D-Bus servers and
 clients.
 .
 At first defer was part of aptdaemon, but moved to a separate project in
 August of 2010.
Original-Maintainer: Sebastian Heinlein <devel@glatzor.de>
Homepage: https://launchpad.net/python-defer
Python-Version: 2.7

Package: libcdaudio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libcdaudio
Version: 0.99.12p2-10build1
Depends: libc6 (>= 2.14)
Description: library for controlling a CD-ROM when playing audio CDs
 This library provides functions for controlling an audio CD: starting,
 stopping, ejecting, etc. It also provides an interface to the CDDB and CD Index
 servers.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://libcdaudio.sourceforge.net/

Package: libvisio-0.1-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 702
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: amd64
Source: libvisio
Version: 0.1.0-1~precise1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libicu48 (>= 4.8-1), librevenge-0.0-0, libstdc++6 (>= 4.6), libxml2 (>= 2.7.4)
Breaks: libvisio-tools (<< 0.0.15~)
Description: library for parsing the visio file structure
 Libvisio is library providing ability to interpret and import visio
 diagrams into various applications.
Homepage: http://freedesktop.org/wiki/Software/libvisio

Package: libgdome2-cpp-smart0c2a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gmetadom
Version: 0.2.6-6build2
Replaces: libgdome2-cpp-smart0, libgdome2-cpp-smart0c2
Depends: libc6 (>= 2.2.5), libgcc1 (>= 1:4.1.1), libgdome2-0, libglib2.0-0 (>= 2.12.0), libstdc++6 (>= 4.2.1)
Conflicts: libgdome2-cpp-smart0, libgdome2-cpp-smart0c2
Description: C++ bindings for GDome2 DOM implementation
 C++ bindings for GDome2 that is a fast, light and complete DOM level2
 implementation based on libxml2.
 .
 This particular binding is one of the bindings from the GMetaDOM
 bindings collection.
 .
 This package includes the shared library.
Original-Maintainer: Debian OCaml Maintainers <debian-ocaml-maint@lists.debian.org>
Homepage: http://gmetadom.sourceforge.net/

Package: hicolor-icon-theme
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 1413
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.12-1ubuntu2
Description: default fallback theme for FreeDesktop.org icon themes
 This is the default fallback theme used by implementations of the
 Freedesktop.org Icon Theme specification.
Original-Maintainer: Ross Burton <ross@debian.org>

Package: xfce4-verve-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 471
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.0-1+ppa1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgtk2.0-0 (>= 2.24.0), libpcre3 (>= 8.10), libxfce4util6 (>= 4.9.0), libxfcegui4-4 (>= 4.7.0), xfce4-panel (>= 4.9.2), exo-utils
Description: Verve (command line) plugin for Xfce panel
 Verve plugin is a command line plugin for Xfce panel, with autocompletion
 and command history
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: usb-creator-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 316
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: usb-creator
Version: 0.2.38.3
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-dbus, syslinux, syslinux-legacy, udisks (>= 1.0~), udisks (<< 1.1), genisoimage, mtools, parted, python-debian
Conffiles:
 /etc/dbus-1/system.d/com.ubuntu.USBCreator.conf 82d0571077f52c01413d25af9045bdfd
Description: create a startup disk using a CD or disc image (common files)
 Startup Disk Creator converts a USB key or SD card into a volume from which you
 can start up and run Ubuntu. You can also store files and settings in any space
 left over.
 .
 The program also works for Debian, or any other Debian-based OS for which you
 have a CD or .iso image.
 .
 This package contains backend engine and common data files used by frontends.
Original-Maintainer: usb-creator Hackers Team <usb-creator-hackers@lists.launchpad.net>

Package: system-config-printer-gnome
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1385
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: system-config-printer
Version: 1.3.8+20120201-0ubuntu8.1
Replaces: system-config-printer
Depends: system-config-printer-common, python-gtk2, python-notify, python-gobject, gnome-icon-theme, python-libxml2, python-gnomekeyring
Conflicts: system-config-printer
Conffiles:
 /etc/xdg/autostart/print-applet.desktop 557c1cccd7bde72a69e433708cc80f6b
Description: Printer configuration GUI
 A CUPS printer configuration tool and status applet.
 .
 This package provides the GTK frontend.
Original-Maintainer: Otavio Salvador <otavio@ossystems.com.br>

Package: libavcodec-extra-53
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 6916
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libav-extra
Version: 4:0.8.15ubuntu0.12.04.1
Replaces: libavcodec53
Depends: libavutil-extra-51 (>= 4:0.8.15ubuntu0.12.04.1), libavutil-extra-51 (<< 4:0.8.15ubuntu0.12.04.1-99), libc6 (>= 2.14), libdirac-encoder0, libgsm1 (>= 1.0.13), libmp3lame0, libopenjpeg2, libschroedinger-1.0-0 (>= 1.0.0), libspeex1 (>= 1.2~beta3-1), libtheora0 (>= 1.0), libva1 (>> 1.0.15~), libvo-aacenc0 (>= 0.1.0~rc1), libvo-amrwbenc0, libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx1 (>= 1.0.0), libx264-120, libxvidcore4 (>= 1.2.2), zlib1g (>= 1:1.2.0)
Pre-Depends: multiarch-support
Suggests: libfaad0
Breaks: mplayer (<< 2:1.0~rc4.dfsg1+svn34540-1~)
Conflicts: libavcodec53
Description: Libav codec library
 Libav is a complete, cross-platform solution to decode, encode, record,
 convert and stream audio and video.
 .
 This is the codec library from Libav (both encoding and decoding).
Built-Using: libav (= 4:0.8.15-0ubuntu0.12.04.1)
Homepage: http://libav.org/
Original-Maintainer: Debian multimedia packages maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: dvd+rw-tools
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 7.1-10
Depends: libc6 (>= 2.4), libstdc++6 (>= 4.1.1), genisoimage, growisofs (>= 7.1-9)
Suggests: cdrskin
Description: DVD+-RW/R tools
 The dvd+rw-tools suite makes it possible to burn DVD images created by
 dvdauthor or genisoimage to DVD+R, DVD+RW, DVD-R, and DVD-RW disks,
 replacing cdrecord-proDVD in many cases.
 .
 This package contains dvd+rw-mediainfo (to give details about DVD
 disks), and some programs to control the write speed and obtain
 information from DVD-RAM.
 .
 Additionally, it depends on the growisofs package to provide the main
 front-end for burning DVD-like media.
Original-Maintainer: Optical Media Tools Team <pkg-opt-media-team@lists.alioth.debian.org>
Homepage: http://fy.chalmers.se/~appro/linux/DVD+RW/

Package: jockey-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 764
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: jockey
Version: 0.9.7-0ubuntu7.14
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-xkit, python-dbus, python-apt, python-pycurl, policykit-1
Recommends: nvidia-common (>= 1:0.2.36)
Conffiles:
 /etc/dbus-1/system.d/com.ubuntu.DeviceDriver.conf da2682593b0d4330c86ef9104d7b3333
 /etc/logrotate.d/jockey-common c107621af3824d73d5de3cf36675f1a7
Description: user interface and desktop integration for driver management
 Jockey provides a user interface for configuring third-party drivers,
 such as the Nvidia and ATI fglrx X.org and various Wireless LAN
 kernel modules.
 .
 This package contains the common data shared between the frontends.
Python-Version: 2.7

Package: aptdaemon-data
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: aptdaemon
Version: 0.43+bzr805-0ubuntu9
Replaces: python-aptdaemon-gtk (<= 0.41+bzr580-0ubuntu1)
Description: data files for clients
 Aptdaemon is a transaction based package management daemon. It allows
 normal users to perform package management tasks, e.g. refreshing the
 cache, upgrading the system, installing or removing software packages.
 .
 This package provides common data files (e.g. icons) for aptdaemon
 clients.
Homepage: https://launchpad.net/aptdaemon
Original-Maintainer: Julian Andres Klode <jak@debian.org>

Package: libgstreamer-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 740
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.16-1build1
Depends: perl (>= 5.14.2-3build1), perlapi-5.14.2, libc6 (>= 2.2.5), libglib2.0-0 (>= 2.12.0), libgstreamer0.10-0 (>= 0.10.33), libglib-perl
Recommends: gstreamer0.10-plugins-base, gstreamer0.10-alsa
Description: Perl interface to the GStreamer media processing framework
 libgstreamer-perl allows a Perl developer to use the GStreamer libraries
 in a perlish way, freeing the programmer from any memory management and
 object casting.
 .
 GStreamer is a media processing framework with support for a wide variety
 of data sources, sinks, and formats through the use of dynamically loaded
 plugins.
 .
 The perl bindings follow the C API very closely, and the C reference
 documentation should be considered the canonical source.
 .
 This module is part of gtk2-perl.
 .
 To discuss gtk2-perl, ask questions and flame/praise the authors,
 join gtk-perl-list@gnome.org at lists.gnome.org.
 .
 Also have a look at the gtk2-perl website and sourceforge project page,
 http://gtk2-perl.sourceforge.net
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/GStreamer/

Package: indicator-sound-gtk2
Status: install ok installed
Priority: extra
Section: sound
Installed-Size: 130
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: indicator-sound
Version: 0.8.5.0-0ubuntu2.1
Replaces: indicator-sound (<< 0.7.1)
Depends: libc6 (>= 2.2.5), libcairo2 (>= 1.2.4), libdbusmenu-glib4 (>= 0.4.2), libdbusmenu-gtk4 (>= 0.4.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0), libgtk2.0-0 (>= 2.20.0), libido-0.1-0 (>= 0.1.9), libindicator7 (>= 0.4.90), libnotify4 (>= 0.7.0), libpango1.0-0 (>= 1.22.0), indicator-sound (= 0.8.5.0-0ubuntu2.1), pulseaudio
Description: System sound indicator.
 System sound indicator which provides easy control of the PulseAudio sound
 daemon.
Homepage: https://launchpad.net/indicator-sound
Original-Maintainer: Conor Curran <conor.curran@canonical.com>

Package: libwbclient0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 176
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: samba
Version: 2:3.6.3-2ubuntu2.11
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libpam-smbpass (<< 2:3.4.1), libsmbclient (<< 2:3.4.1), samba (<< 2:3.4.1), samba-common (<< 2:3.4.1), samba-tools (<< 2:3.4.1), smbclient (<< 2:3.4.1), smbfs (<< 2:3.4.1), swat (<< 2:3.4.1), winbind (<< 2:3.4.1)
Description: Samba winbind client library
 Samba is an implementation of the SMB/CIFS protocol for Unix systems,
 providing support for cross-platform file and printer sharing with
 Microsoft Windows, OS X, and other Unix systems.
 .
 This package provides a library for client applications that interact
 via the winbind pipe protocol with a Samba winbind server.
Homepage: http://www.samba.org
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>

Package: fonts-tlwg-loma
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: fonts-tlwg
Version: 1:0.4.17-1ubuntu1
Replaces: ttf-thai-tlwg (<< 1:0.4.16)
Breaks: ttf-thai-tlwg (<< 1:0.4.16)
Conffiles:
 /etc/fonts/conf.avail/64-12-tlwg-loma.conf 9ddb75b57b88d36c70b0373db2a6b621
 /etc/fonts/conf.avail/89-tlwg-loma-synthetic.conf 13faad7f76cf0d0050089d73fa2e462b
Description: Thai Loma font
 This package provides Thai Loma UI font from NECTEC.
 .
 The font provides Arial-compatible Thai glyphs with metrics optimized
 for on-screen user interface. For example, line spacing is reduced from
 regular typographic designs to allow more lines displayed on screen.
Homepage: http://linux.thai.net/projects/thaifonts-scalable
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: gigolo
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 998
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 0.4.2-1~ppa0.12.04.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.0), libx11-6
Recommends: gvfs-bin
Description: frontend to manage connections to remote filesystems using GIO/GVfs
 Gigolo is a frontend to easily manage connections to remote filesystems
 using GIO/GVfs. It allows you to quickly connect/mount a remote filesystem
 and manage bookmarks of such.
Homepage: http://www.uvena.de/gigolo/

Package: install-info
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: doc
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: texinfo
Version: 4.13a.dfsg.1-8ubuntu2
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.14)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Description: Manage installed documentation in info format
 The install-info utility creates the index of all installed documentation
 in info format and makes it available to info readers.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>

Package: firefox-globalmenu
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 168
Maintainer: Ubuntu Mozilla Team <ubuntu-mozillateam@lists.ubuntu.com>
Architecture: amd64
Source: firefox
Version: 31.0+build1-0ubuntu0.12.04.1
Depends: firefox
Description: Safe and easy web browser from Mozilla (transitional package)
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: liblaunchpad-integration-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: launchpad-integration
Version: 0.1.56.1
Replaces: liblaunchpad-integration1 (<< 0.1.41)
Breaks: liblaunchpad-integration1 (<< 0.1.41)
Description: library for launchpad integration common data
 The launchpad-integration tools provide an easy way to set menu items,
 for an application using GtkUIManager, pointing to the launchpad pages
 about a package. Users can get information about the used application here,
 translate it, ...
 .
 This package contains the data files for the library.
Original-Maintainer: Sebastien Bacher <seb128@debian.org>

Package: xfce4-weather-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 3384
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 0.8.3-0ubuntu1~ppa0.12.04.1
Depends: libc6 (>= 2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.24.0), libpango1.0-0 (>= 1.14.0), libsoup2.4-1 (>= 2.4.0), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxml2 (>= 2.7.4), xfce4-panel (>= 4.9.2)
Description: weather information plugin for the Xfce4 panel
 The weather plugin displays information about the current weather according
 your timezone and settings. It allows one to search weather location code in
 the same plugin and displays weather status in little icons.
 .
 Features include:
  - Temperature, atmospheric pressure and state.
  - Wind speed, gust, and direction.
  - Humidity, Visibility, Dew-point, UV Index.
Homepage: http://goodies.xfce.org/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: musepack-tools
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 360
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libmpc
Version: 2:0.1~r459-1ubuntu1
Depends: libc6 (>= 2.7), libcue1, libmpcdec6 (>= 1:0.1~r435), libreplaygain1 (>= 1.0~r412)
Description: MusePack commandline utilities
 Musepack is an audio compression format with a strong emphasis on
 high quality. It's not lossless, but it is designed for transparency,
 so that you won't be able to hear differences between the original
 wave file and the much smaller MPC file.
 .
 It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997
 it has rapidly developed and vastly improved and is now at an advanced
 stage in which it contains heavily optimized and patentless code.
 .
 This package contains various commandline  utilities for MusePack files:
  - mpcenc (encoder)
  - mpcdec (decoder)
  - mpccut (cut MPC files without reencoding)
  - mpcgain (gain calculation)
  - mpc2sv8 (conversion to MusePack SV8 from older SV)
Homepage: http://www.musepack.net
Original-Maintainer: Debian multimedia packages maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: libloudmouth1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: loudmouth
Version: 1.4.3-8
Depends: libasyncns0 (>= 0.3), libc6 (>= 2.14), libglib2.0-0 (>= 2.16.0), libgnutls26 (>= 2.12.6.1-0), libidn11 (>= 1.13)
Description: Lightweight C Jabber library
 Loudmouth is a lightweight and easy-to-use C library for programming
 with the Jabber protocol. It's designed to be easy to get started
 with and yet extensible to let you do anything the Jabber protocol
 allows.
Original-Maintainer: Ross Burton <ross@debian.org>

Package: libflite1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 24136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: flite
Version: 1.4-release-4
Depends: libasound2 (>> 1.0.24.1), libc6 (>= 2.11)
Suggests: alsa-base
Description: Small run-time speech synthesis engine - shared libraries
 Flite is a small fast run-time speech synthesis engine.  It is the
 latest addition to the suite of free software synthesis tools
 including University of Edinburgh's Festival Speech Synthesis System
 and Carnegie Mellon University's FestVox project, tools, scripts and
 documentation for building synthetic voices.  However, flite itself
 does not require either of these systems to run.
 .
 It currently only supports the English language.
 .
 This package contains the shared library objects of Festival Lite
Original-Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Homepage: http://www.speech.cs.cmu.edu/flite

Package: unace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.2b-9
Depends: libc6 (>= 2.4)
Description: extract, test and view .ace archives
 The unace utility is used for extracting, testing and viewing
 the contents of archives created with the ACE archiver.
Original-Maintainer: Guillem Jover <guillem@debian.org>

Package: mppenc
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 180
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: amd64
Version: 1.16-1
Depends: libc6 (>= 2.6.1-1)
Suggests: wavpack, flac
Description: Musepack lossy audio codec encoder
 Musepack is a lossy audio codec specifically optimized for transparent
 compression of stereo audio at bitrates of 160-180 kbit/s.
 .
 This package contains the encoder, for decoding see libmpcdec3.
 .
  Homepage: http://www.musepack.net/
Original-Maintainer: Jorge Salamero Sanz <bencer@cauterized.net>

Package: libxss1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxss
Version: 1:1.2.1-2
Depends: libc6 (>= 2.2.5), libx11-6, libxext6, x11-common
Pre-Depends: multiarch-support
Description: X11 Screen Saver extension library
 libXss provides an X Window System client interface to the MIT-SCREEN-SAVER
 extension to the X protocol.
 .
 The Screen Saver extension allows clients behaving as screen savers to
 register themselves with the X server, to better integrate themselves with
 the running session.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libScrnSaver
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: apport-symptoms
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.16.1
Recommends: apport
Description: symptom scripts for apport
 Apport intercepts program crashes, collects debugging information about the
 crash and the operating system environment, and sends it to bug trackers in a
 standardized form. It also offers the user to report a bug about a package,
 with again collecting as much information about it as possible.
 .
 This package extends Apport by some "symptom" scripts, so that bug reporters
 do not have to guess the correct package, but report problems based on
 symptoms that they have (like "sound problem"), through an interactive process.
Homepage: https://wiki.ubuntu.com/Apport

Package: libfile-basedir-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.03-1fakesync1
Depends: perl
Description: Perl module to use the freedesktop basedir specification
 The File::BaseDir module can be used to find directories and files as
 specified by the XDG Base Directory Specification. It takes care of
 defaults and uses File::Spec to make the output platform specific.
 .
 For this module the XDG basedir specification 0.6 was used.
Homepage: http://search.cpan.org/dist/File-BaseDir/
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>

Package: libwacom2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Timo Aaltonen <tjaalton@ubuntu.com>
Architecture: amd64
Source: libwacom
Version: 0.4-1ubuntu1
Depends: libc6 (>= 2.8), libglib2.0-0 (>= 2.24.0), libgudev-1.0-0 (>= 147), libwacom-common (= 0.4-1ubuntu1)
Pre-Depends: multiarch-support
Description: Wacom model feature query library
 libwacom is a library to identify wacom tablets and their model-specific
 features. It provides easy access to information such as "is this a built-in
 on-screen tablet", "what is the size of this model", etc.

Package: p7zip-rar
Status: install ok installed
Priority: optional
Section: non-free/utils
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 9.20.1~ds.1-3
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), p7zip-full (>= 9.20.1~), p7zip-full (<< 9.20.2~)
Description: non-free rar module for p7zip
 p7zip is the Unix port of 7-Zip, a file archiver that archives with
 very high compression ratios.
 .
 p7zip-rar provides a module for p7zip-full to make 7z able to
 extract RAR files.
Original-Maintainer: Mohammed Adnène Trojette <adn+deb@diwi.org>
Homepage: http://p7zip.sourceforge.net/

Package: libxkbfile1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxkbfile
Version: 1:1.0.7-1ubuntu0.1
Depends: libc6 (>= 2.14), libx11-6
Pre-Depends: multiarch-support
Description: X11 keyboard file manipulation library
 libxkbfile provides an interface to read and manipulate description files for
 XKB, the X11 keyboard configuration extension.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libxkbfile
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: xfce4-panel
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 3339
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 4.10.1-0ubuntu1~ppa0.12.04.1
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.14), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libexo-1-0 (>= 0.5.0), libgarcon-1-0 (>= 0.1.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.0), libpango1.0-0 (>= 1.14.0), libwnck22 (>= 1:2.22), libx11-6, libxext6, libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), exo-utils
Pre-Depends: multiarch-support
Conffiles:
 /etc/xdg/xfce4/panel/default.xml 0d5aba4e1fb93dd322af5232957ee545
Description: panel for Xfce4 desktop environment
 This is the panel provided by the Xfce4 desktop project.  If you want a
 multi-functional panel that can even handle plugins and the like, xfce4-panel
 might be worth a try.
Homepage: http://www.xfce.org/
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: lsb-release
Status: install ok installed
Multi-Arch: foreign
Priority: extra
Section: misc
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lsb
Version: 4.0-0ubuntu20.3
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: http://www.linux-foundation.org/en/LSB
Original-Maintainer: Chris Lawrence <lawrencc@debian.org>

Package: libgpod4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 530
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgpod
Version: 0.8.2-4
Depends: libc6 (>= 2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libimobiledevice2 (>= 0.9.7), libplist1 (>= 0.16), libsqlite3-0 (>= 3.5.9), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Recommends: libgpod-common
Conflicts: libgpod4-nogtk
Description: library to read and write songs and artwork to an iPod
 libgpod is a library meant to abstract access to an iPod's content. It
 provides an easy to use API to retrieve the list of files and playlist
 stored on an iPod, to modify them and to save them back to the iPod
 .
 This package contains the shared library.
Original-Maintainer: gtkpod Maintainers <pkg-gtkpod-devel@lists.alioth.debian.org>
Homepage: http://www.gtkpod.org/wiki/Libgpod

Package: libgail-3-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gtk+3.0
Version: 3.4.2-0ubuntu0.8
Replaces: libgail3.0-0
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.2.5), libglib2.0-0 (>= 2.32.0), libgtk-3-0 (= 3.4.2-0ubuntu0.8), libpango1.0-0 (>= 1.30.0)
Pre-Depends: multiarch-support
Conflicts: libgail3.0-0
Description: GNOME Accessibility Implementation Library -- shared libraries
 Gail implements ATK interfaces for GTK+ widgets which are dynamically
 loadable at runtime by a GTK+ application. Once loaded, those parts of
 an application that use standard GTK+ widgets will have a basic level
 of accessibility, without the need to modify the application at all.
 .
 This package contains the shared library.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: python-twisted-web
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1716
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: twisted-web
Version: 11.1.0-1
Replaces: python-twisted (<< 2.1), python2.3-twisted-web, python2.4-twisted-web
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-twisted-core (>= 11.1)
Conflicts: python-twisted (<< 2.1), python2.3-minimal, python2.3-twisted-web, python2.4-twisted-web
Description: HTTP protocol implementation together with clients and servers
 Twisted web is a web server, and also provides basic HTTP client
 support. You may want to check out Nevow, a templating toolkit
 designed for twisted.web, and Twisted Web2, the next generation
 Twisted web server.
Original-Maintainer: Matthias Klose <doko@debian.org>
Python-Version: 2.7

Package: update-inetd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.41
Replaces: netbase (<< 4.27)
Depends: debconf (>= 0.5) | debconf-2.0, libfile-temp-perl, libfile-copy-recursive-perl
Breaks: netbase (<< 4.27)
Description: inetd configuration file updater
 This package provides a program used by other packages to
 automatically update /etc/inetd.conf, the configuration file shared
 by all implementations of the Internet super-server.
 .
 Note that xinetd is not supported by this package.
Original-Maintainer: Serafeim Zanikolas <sez@debian.org>

Package: fonts-tlwg-umpush
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 511
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: fonts-tlwg
Version: 1:0.4.17-1ubuntu1
Replaces: ttf-thai-tlwg (<< 1:0.4.16)
Breaks: ttf-thai-tlwg (<< 1:0.4.16)
Conffiles:
 /etc/fonts/conf.avail/64-14-tlwg-umpush.conf 38d098185d586b1ec0809c259ef4352a
 /etc/fonts/conf.avail/89-tlwg-umpush-synthetic.conf 4cabf421c212dec9cac1946a2bbee72f
Description: Thai Umpush font
 This package provides Thai Umpush font from TLWG.
 .
 The font provides arch-shaped Thai glyphs similar to Cordia.
 The style is mostly used in pocket books or semi-official documents.
Homepage: http://linux.thai.net/projects/thaifonts-scalable
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: xdg-user-dirs-gtk
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 100
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 0.9-0ubuntu1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), xdg-user-dirs
Conffiles:
 /etc/xdg/autostart/user-dirs-update-gtk.desktop 7066a0f3dfb07dfd30dc8b363482b747
Description: tool to manage well known user directories (Gtk extension)
 xdg-user-dirs is a tool to help manage "well known" user directories
 like the desktop folder and the music folder. It also handles
 localization (i.e. translation) of the filenames.
 .
 This extension sets the Gtk bookmark file and tracks changes of the locale
 to notify the user on login about changed directory names.
Homepage: http://www.freedesktop.org/wiki/Software/xdg-user-dirs
Original-Maintainer: Sebastian Dröge <slomo@debian.org>

Package: libgudev-1.0-0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 187
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: udev (175-0ubuntu9.5)
Version: 1:175-0ubuntu9.5
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.22.0), libudev0 (>= 165)
Pre-Depends: multiarch-support
Description: GObject-based wrapper library for libudev
 This library makes it much simpler to use libudev from programs already using
 GObject. It also makes it possible to easily use libudev from other
 programming languages, such as Javascript, because of GObject introspection
 support.
 .
 This package contains the shared libraries.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: libgtksourceview-3.0-common
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 1372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gtksourceview3
Version: 3.4.2-0ubuntu1
Description: common files for the GTK+ syntax highlighting widget
 GtkSourceView is a text widget that extends the standard GTK+ 3.x text widget
 GtkTextView. It improves GtkTextView by implementing syntax highlighting and
 other features typical of a source editor.
 .
 This package contains the language specifications files for Ada, C, C++, C#,
 CSS, ".desktop", ".diff" (patch), Fortran 95, GtkRC, Haskell, HTML, IDL,
 ".ini", Java, JavaScript, LaTeX, Lua, MSIL, Nemerle, Pascal, Perl, PHP, ".po"
 (gettext), Python, R, Ruby, sh, SQL, Tcl, Texinfo, VB.NET, Verilog, VHDL and
 XML.
Homepage: http://projects.gnome.org/gtksourceview/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.0.28ubuntu0.1
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Suggests: openssl-blacklist
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: apport-gtk
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 182
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.0.1-0ubuntu17.7
Depends: python (>= 2.4), python-apport (>= 2.0.1-0ubuntu17.7), gir1.2-gtk-3.0 (>= 3.1.90), python-gi, python-xdg, apport (>= 0.41), procps
Recommends: update-notifier, gdb
Description: GTK+ frontend for the apport crash report system
 apport automatically collects data from crashed processes and
 compiles a problem report in /var/crash/. This utilizes the crashdump
 helper hook provided by the Ubuntu kernel.
 .
 This package provides a GTK+ frontend for browsing and handling the
 crash reports.
Homepage: https://wiki.ubuntu.com/Apport

Package: dkms
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.2.0.3-1ubuntu3.2
Depends: module-init-tools, gcc, make | build-essential | dpkg-dev, coreutils (>= 7.4), patch
Recommends: fakeroot, menu | sudo
Conffiles:
 /etc/dkms/template-dkms-mkdeb/debian/postinst 205c51f28c7327c0d13f5891fac55d04
 /etc/dkms/template-dkms-mkdeb/debian/changelog f14e36c92f14270163eb20fa883d463e
 /etc/dkms/template-dkms-mkdeb/debian/dirs ea7a90f4a1be2e0054c3d4920c29e33f
 /etc/dkms/template-dkms-mkdeb/debian/README.Debian 6707f5716bc3a2d65fa1b05d81ba8add
 /etc/dkms/template-dkms-mkdeb/debian/copyright de471e376ba2c3886424b5c4649c42d6
 /etc/dkms/template-dkms-mkdeb/debian/control 932cd11859c7c153a8c458325e74497f
 /etc/dkms/template-dkms-mkdeb/debian/compat 84bc3da1b3e33a18e8d5e1bdd7a18d7a
 /etc/dkms/template-dkms-mkdeb/debian/prerm e7c0c39003edb2255d22a775efa907e5
 /etc/dkms/template-dkms-mkdeb/debian/rules c385ec9e8f6c6745ad9b9665c38cbd84
 /etc/dkms/template-dkms-mkdeb/Makefile d97acaeba72f667d3eb69695e9018243
 /etc/dkms/framework.conf 4e72dd99504978161b561f69256c1696
 /etc/bash_completion.d/dkms fbb05514b62b89752809c57964679b3b
 /etc/modprobe.d/dkms.conf 74452a1f23577a0bb30d764a895429d0
 /etc/kernel/prerm.d/dkms 97139ec74350d65636320b76a11b1f47
 /etc/kernel/header_postinst.d/dkms fa05cd89316f042b4ed12090e5aad896
 /etc/kernel/postinst.d/dkms fa05cd89316f042b4ed12090e5aad896
Description: Dynamic Kernel Module Support Framework
 DKMS is a framework designed to allow individual kernel modules to be upgraded
 without changing the whole kernel. It is also very easy to rebuild modules as
 you upgrade kernels.
Homepage: http://linux.dell.com/dkms
Original-Maintainer: Dynamic Kernel Modules Support Team <pkg-dkms-maint@lists.alioth.debian.org>

Package: libxml-xpath-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 344
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.13-7
Depends: perl, libxml-parser-perl
Description: Perl module for processing XPath
 The XML::XPath module implements the W3C's XPath specification.  It aims to
 be completely correct to the letter of the spec, and yet still allow
 extensions through the use of functions and variables, such as are
 provided by XSLT and XPointer.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/XML-XPath/

Package: libsamplerate0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1499
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsamplerate
Version: 0.1.8-4
Replaces: samplerate-programs (<< 0.1.8-3)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Audio sample rate conversion library
 libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion.
 .
 libsamplerate currently provides three different sample rate conversion
 algorithms; zero order hold, linear interpolation and FIR filter interpolation
 (using filters derived from the mathematical SINC function). The first two
 algorithms (zero order hold and linear) are included for completeness and are
 not recommended for any application where high quality sample rate conversion
 is required. For the FIR/Sinc algorithm, three converters are provided;
 SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a
 trade off between conversion speed and conversion quality.
 .
 libsamplerate is capable of downsampling to 1/256 of the original sample rate
 and upsampling to 256 times the original sample rate. It is also capable of
 time varying conversions for vary speed effects and synchronising of two
 unlocked sample rates.
Original-Maintainer: Erik de Castro Lopo <erikd@mega-nerd.com>
Homepage: http://www.mega-nerd.com/SRC/

Package: libcanberra-gtk-module
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libcanberra
Version: 0.28-3ubuntu3
Depends: libc6 (>= 2.2.5), libcanberra-gtk0 (>= 0.2), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.24.5-4), gconf2 (>= 2.28.1-2)
Description: translates GTK+ widgets signals to event sounds
 A GtkModule which will automatically hook into all kinds of events
 inside a GTK+ program and generate sound events from them.
Homepage: http://0pointer.de/lennart/projects/libcanberra/
Original-Maintainer: Marc-Andre Lureau <marcandre.lureau@gmail.com>

Package: libnm-util2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 464
Maintainer: Ubuntu Core Dev Team <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: network-manager
Version: 0.9.4.0-0ubuntu4.4.1
Depends: libc6 (>= 2.14), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.31.8), libnspr4 (>= 1.8.0.10), libnss3 (>= 3.12.0~1.9b1), libuuid1 (>= 2.16)
Description: network management framework (shared library)
 NetworkManager is a system network service that manages your network devices
 and connections, attempting to keep active network connectivity when
 available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE
 devices, and provides VPN integration with a variety of different VPN
 services.
 .
 This package contains a convenience library to ease the access to
 NetworkManager.
Homepage: http://www.gnome.org/projects/NetworkManager/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libc6-dev
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libdevel
Installed-Size: 11600
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: eglibc
Version: 2.15-0ubuntu10.7
Provides: libc-dev
Depends: libc6 (= 2.15-0ubuntu10.7), libc-dev-bin (= 2.15-0ubuntu10.7), linux-libc-dev
Recommends: gcc | c-compiler
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.20.1-1), binutils-gold (<< 2.20.1-11), cmake (<< 2.8.4+dfsg.1-5), gcc-4.4 (<< 4.4.6-3ubuntu1), gcc-4.4-base (<< 4.4.6-3ubuntu1), gcc-4.5 (<< 4.5.3-1ubuntu2), gcc-4.5-base (<< 4.5.3-1ubuntu2), gcc-4.6 (<< 4.6.0-12), gcj-4.4-base (<< 4.4.6-2ubuntu2), gcj-4.5-base (<< 4.5.3-1ubuntu2), gnat-4.4-base (<< 4.4.6-1ubuntu3), libhwloc-dev (<< 1.2-3), libjna-java (<< 3.2.7-4), liblouis-dev (<< 2.3.0-2), liblouisxml-dev (<< 2.4.0-2), make (<< 3.81-8.1), pkg-config (<< 0.26-1)
Description: Embedded GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnotify4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libnotify
Version: 0.7.5-1
Depends: libc6 (>= 2.7), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0)
Pre-Depends: multiarch-support
Recommends: notification-daemon
Description: sends desktop notifications to a notification daemon
 A library that sends desktop notifications to a notification daemon, as
 defined in the Desktop Notifications spec. These notifications can be
 used to inform the user about an event or display some form of
 information without getting in the user's way.
 .
 This package contains the shared library. To actually display the
 notifications, you need to install the package notification-daemon.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gnumeric-common
Status: install ok installed
Priority: optional
Section: math
Installed-Size: 13785
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnumeric
Version: 1.10.17-1ubuntu2
Replaces: gnumeric (<= 1.2.6-1)
Description: spreadsheet application for GNOME - common files
 Gnumeric is a spreadsheet application that interoperates well
 with other spreadsheets. It comes with plugins that enable it to deal with
 commonly used spreadsheet file formats.
 .
 This package contains architecture-independent data files needed by
 gnumeric.
Homepage: http://www.gnumeric.org/
Original-Maintainer: J.H.M. Dassen (Ray) <jdassen@debian.org>

Package: liba52-0.7.4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: a52dec
Version: 0.7.4-16build1
Depends: libc6 (>= 2.4)
Description: library for decoding ATSC A/52 streams
 liba52 is a free library for decoding ATSC A/52 streams. The A/52 standard is
 used in a variety of applications, including digital television and DVD. It is
 also known as AC-3.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://liba52.sourceforge.net/

Package: bzip2
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.6-1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-1), libc6 (>= 2.4)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.bzip.org/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 295
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vim
Version: 2:7.3.429-2ubuntu2.1
Depends: libc6 (>= 2.3.4)
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Conffiles:
 /etc/vim/vimrc 682aa2a07693cc27756eee9751db3903
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains files shared by all non GUI-enabled vim
 variants (vim and vim-tiny currently) available in Debian.
 Examples of such shared files are: manpages, common executables
 like xxd, and configuration files.
Homepage: http://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>

Package: xcfa
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 2272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2.8-1
Depends: flac, icedax | cdparanoia, vorbis-tools, libasound2 (>> 1.0.24.1), libc6 (>= 2.7), libcairo2 (>= 1.2.4), libcurl3-gnutls (>= 7.16.2-1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.14.0), libgtk2.0-0 (>= 2.12.0), libpango1.0-0 (>= 1.14.0), libtagc0 (>= 1.5), libvte9 (>= 1:0.24.0)
Recommends: checkmp3, dvd+rw-tools, faad, ghostscript, lame, lsdvd, mp3gain, mplayer, mppenc, musepack-tools, normalize-audio, shntool, sox, vorbisgain, wavpack
Suggests: faac, liba52-0.7.4-dev, monkeys-audio
Description: X Convert File Audio
 XCFA is a tool to extract the contens of Audio-CDs and convert musical
 audio files conversion to FLAC, WAV, OGG, M4A, MPC, MP3, WavPack and
 many other formats.
 .
 Some features follow:
  * Handling of frequency, track and bits.
  * Handling of files shared volume before a recording.
  * Web retrieval of Audio-CD information during treatment.
  * Small cover creation for Audio-CDs.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://www.xcfa.tuxfamily.org/

Package: libwavpack1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: wavpack
Version: 4.60.1-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: audio codec (lossy and lossless) - library
 WavPack is a completely open audio compression format providing lossless,
 high-quality lossy, and a unique hybrid compression mode. Although the
 technology is loosely based on previous versions of WavPack, the new version
 4 format has been designed from the ground up to offer unparalleled
 performance and functionality.
 .
 This package contains the shared libraries necessary to run programs
 using libwavpack.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://www.wavpack.com

Package: libqt4-sql
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Kubuntu Developers <kubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Source: qt4-x11
Version: 4:4.8.1-0ubuntu4.8
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libqtcore4 (= 4:4.8.1-0ubuntu4.8), libstdc++6 (>= 4.1.1)
Pre-Depends: multiarch-support
Recommends: libqt4-sql-mysql | libqt4-sql-odbc | libqt4-sql-psql | libqt4-sql-sqlite
Suggests: libqt4-dev
Description: Qt 4 SQL module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtSql module helps you provide seamless database integration to your Qt
 applications.
 .
 If you wish to use the SQL module for development, you should install the
 libqt4-dev package.
Homepage: http://qt.nokia.com/
Original-Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>

Package: gnome-exe-thumbnailer
Status: install ok installed
Priority: extra
Section: gnome
Installed-Size: 97
Maintainer: Scott Ritchie <scottritchie@ubuntu.com>
Architecture: all
Version: 0.9-0ubuntu1
Depends: icoutils, imagemagick, python
Description: Wine .exe and other executable thumbnailer for Gnome
 gnome-exe-thumbnailer is a thumbnailer for Gnome that will give Windows .exe
 files an icon based on their embedded icon and a generic "Wine program" icon.
 If the program has normal execute permissions, then the standard embedded icon
 will be shown.  This thumbnailer will also give a thumbnail icon for .jar, .py,
 and similar executable programs.

Package: libdmapsharing-3.0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdmapsharing
Version: 2.9.14-1
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libavahi-glib1 (>= 0.6.16), libc6 (>= 2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.2), libgstreamer-plugins-base0.10-0 (>= 0.10.23.2), libgstreamer0.10-0 (>= 0.10.0), libsoup2.4-1 (>= 2.32), zlib1g (>= 1:1.1.4)
Description: DMAP client and server library - runtime
 libdmapsharing is a library to access and share content through the
 DMAP (DAAP & DPAP) protocols. The library is written in C using GObject
 and libsoup.
 .
 This package contains the runtime needed by programs using the
 library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: http://www.flyn.org/projects/libdmapsharing/

Package: gir1.2-soup-2.4
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libsoup2.4
Version: 2.38.1-1
Provides: gir1.2-soup-gnome-2.4
Depends: gir1.2-glib-2.0, libsoup-gnome2.4-1 (>= 2.27.4), libsoup2.4-1 (>= 2.37.92)
Conflicts: gir1.0-soup-2.4, gir1.0-soup-gnome-2.4
Description: GObject introspection data for the libsoup HTTP library
 This package contains introspection data for the libsoup HTTP library.
 .
 libsoup uses the Glib main loop and is designed to work well with GTK+
 applications.  This enables GNOME applications to access HTTP servers
 on the network in a completely asynchronous fashion, very similar to
 the GTK+ programming model (a synchronous operation mode is also
 supported for those who want it).
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.00-2
Replaces: libwww-perl (<< 6.00)
Depends: perl, libhttp-message-perl
Breaks: libwww-perl (<< 6.00)
Description: implementation of content negotiation
 HTTP::Negotiate provides a complete implementation of the HTTP content
 negotiation algorithm. Content negotiation allows for the selection of a
 preferred content representation based upon attributes of the negotiable
 variants and the value of the various Accept* header fields in the request.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/HTTP-Negotiate/

Package: language-selector-gnome
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: language-selector
Version: 0.79.4
Replaces: language-selector (<< 0.17)
Depends: language-selector-common (= 0.79.4), python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-gi, gir1.2-gtk-3.0, gir1.2-vte-2.90, python-apt (>= 0.6.12), aptdaemon (>= 0.40+bzr527), python-aptdaemon.gtk3widgets, im-switch
Conflicts: language-selector (<< 0.17)
Description: Language selector for Ubuntu
 This package let you change and install language packs
 in Ubuntu.
 .
 This package contains the GTK+ frontend.
Python-Version: 2.7

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 901
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.1-4ubuntu5.17
Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.1)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf ce31ab5015842bf7c2939514a634e0e4
Description: Secure Socket Layer (SSL) binary and related cryptographic tools
 This package contains the openssl binary and related tools.
 .
 It is part of the OpenSSL implementation of SSL.
 .
 You need it to perform certain cryptographic actions like:
  -  Creation of RSA, DH and DSA key parameters;
  -  Creation of X.509 certificates, CSRs and CRLs;
  -  Calculation of message digests;
  -  Encryption and decryption with ciphers;
  -  SSL/TLS client and server tests;
  -  Handling of S/MIME signed or encrypted mail.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: python-gnupginterface
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnupginterface
Version: 0.3.2-9.1ubuntu3
Provides: python2.7-gnupginterface
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), gnupg (>= 1.2.1) | gnupg2
Description: Python interface to GnuPG (GPG)
 GnuPGInterface is a Python module to interface with GnuPG.
 It concentrates on interacting with GnuPG via filehandles,
 providing access to control GnuPG via versatile and extensible means.
 .
 This module is based on GnuPG::Interface, a Perl module by the same
 author.
Original-Maintainer: Guilherme de S. Pastore <gpastore@colband.com.br>

Package: modemmanager
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1155
Maintainer: Alexander Sack <asac@ubuntu.com>
Architecture: amd64
Version: 0.5.2.0-0ubuntu2
Depends: libc6 (>= 2.14), libdbus-glib-1-2 (>= 0.88), libglib2.0-0 (>= 2.31.2), libgudev-1.0-0 (>= 147), upstart-job
Recommends: usb-modeswitch
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.ModemManager.conf a2a61104bf3fc6aef138de420243f06b
 /etc/init/modemmanager.conf 46dc92ed2060d5db99d5f0c336aaa6f1
Description: D-Bus service for managing modems
 Provides a D-Bus interface to communicate with mobile broadband (GSM, CDMA,
 UMTS, ...) cards. Implements a loadable plugin interface to add work-arounds
 for non standard devices. Also provides patches to use networkmanager (and
 the applet) with modem manager.
 .
 Git Repository: http://cgit.freedesktop.org/ModemManager/ModemManager/

Package: printer-driver-hpcups
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 1574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: hplip
Version: 3.12.2-1ubuntu3.4
Replaces: hplip-cups (<< 3.11.10-1ubuntu2)
Depends: libc6 (>= 2.15), libcups2 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libhpmud0, libjpeg8 (>= 8c), libstdc++6 (>= 4.1.1), ghostscript-cups, cups (>= 1.4.0) | cupsddk, cups
Suggests: hplip-doc, hplip (= 3.12.2-1ubuntu3.4)
Breaks: hplip-cups (<< 3.11.10-1ubuntu2)
Description: HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
 This package contains a CUPS-Raster-based printer driver which adds support
 for most inkjet printers and some LaserJet printers manufactured by HP. It
 does not provide PPDs for the fax functionality of HP's multi-function
 devices.
 .
 Users of the CUPS printing system are advised to also install the
 hplip package, and use the hp CUPS backend to send data to the printer.
 HPLIP supports USB, networked and parallel-port devices, and enables
 extended hpcups functionality such as border-less printing.
 Selecting any hpcups ppd in CUPS will use hpcups automatically.
 .
 No physical PPDs are shipped with this driver. PPDs are dynamically
 generated via a CUPS DDK .drv file.
 .
 This package can be installed to provide a minimal headless printer
 solution using CUPS.
Homepage: http://hplipopensource.com/hplip-web/index.html
Original-Maintainer: Debian HPIJS and HPLIP maintainers <pkg-hpijs-devel@lists.alioth.debian.org>

Package: firefox-locale-fr
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 644
Maintainer: Ubuntu Mozilla Team <ubuntu-mozillateam@lists.ubuntu.com>
Architecture: amd64
Source: firefox
Version: 31.0+build1-0ubuntu0.12.04.1
Replaces: language-pack-fr-base
Description: French language pack for Firefox
 This package contains French translations and search plugins
 for Firefox

Package: python-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 861
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pygobject
Version: 3.2.2-1~precise
Replaces: python-gobject (<< 3.0.2-4)
Provides: python2.7-gi
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), libc6 (>= 2.14), libgirepository-1.0-1 (>= 1.29.0), libglib2.0-0 (>= 2.31.8), gir1.2-glib-2.0 (>= 1.31.0)
Suggests: python-gi-cairo
Breaks: python-gobject (<< 3.0.2-4), python-nautilus (<= 1.1-1)
Description: Python 2.x bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 2.x binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python.
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: libglib2.0-data
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 868
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: glib2.0
Version: 2.32.4-0ubuntu1
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: mpg321
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.2.13-4ubuntu1
Provides: mp3-decoder, mpg123
Depends: libao4 (>= 1.1.0), libc6 (>= 2.7), libid3tag0 (>= 0.15.1b), libmad0 (>= 0.15.1b-3)
Recommends: libaudio-scrobbler-perl
Description: Simple and lightweight command line MP3 player
 mpg321 is a clone of the popular mpg123 command-line mp3 player. It should
 function as a drop-in replacement for mpg123 in many cases. While some of
 the functionality of mpg123 is not yet implemented, mpg321 should function
 properly in most cases for most people, such as for frontends such as
 gqmpeg.
 .
 mpg321 is based on the mad MPEG audio decoding library. It therefore is
 highly accurate, and also uses only fixed-point calculation, making it
 more efficient on machines without a floating-point unit. It is not as
 fast as mpg123 on systems which have a floating point unit.
Homepage: http://mpg321.sourceforge.net
Original-Maintainer: Nanakos Chrysostomos <nanakos@wired-net.gr>

Package: libmatroska5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 674
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libmatroska
Version: 1.3.0-1
Depends: libc6 (>= 2.4), libebml3, libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Description: extensible open standard audio/video container format (shared library)
 Matroska is aiming to become the standard of Multimedia
 Container Formats one day. It is based on EBML (Extensible Binary
 Meta Language), a kind of binary version of XML. This way the
 significant advantages in terms of future format extensability
 are gained without breaking file support in old parsers.
 .
 This package contains the shared library needed to run applications that
 use libmatroska.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://www.matroska.org/

Package: python-software-properties
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 208
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.82.7.7
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-apt (>= 0.6.20ubuntu16), lsb-release, python-gnupginterface, unattended-upgrades, iso-codes, python-pycurl
Description: manage the repositories that you install software from
 This software provides an abstraction of the used apt repositories.
 It allows you to easily manage your distribution and independent software
 vendor software sources.

Package: libgdk-pixbuf2.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 550
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gdk-pixbuf
Version: 2.26.1-1ubuntu1.1
Replaces: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3)
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.18), libjasper1, libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), libtiff4, libx11-6, libgdk-pixbuf2.0-common (= 2.26.1-1ubuntu1.1)
Pre-Depends: multiarch-support
Breaks: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3), librsvg2-2 (<< 2.26.3-2), libwmf0.2-7 (<< 0.2.8.4-7)
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgdk-pixbuf2.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 501
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: gdk-pixbuf
Version: 2.26.1-1ubuntu1.1
Replaces: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3)
Depends: libc6 (>= 2.11), libglib2.0-0 (>= 2.31.18), libjasper1, libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), libtiff4, libx11-6, libgdk-pixbuf2.0-common (= 2.26.1-1ubuntu1.1)
Pre-Depends: multiarch-support
Breaks: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3), librsvg2-2 (<< 2.26.3-2), libwmf0.2-7 (<< 0.2.8.4-7)
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libquadmath0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 246
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libical0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 630
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libical
Version: 0.48-1ubuntu3
Depends: libc6 (>= 2.14), tzdata
Description: iCalendar library implementation in C (runtime)
 libical is an open source implementation of the IETF's iCalendar calendaring
 and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components
 and provides a C API for manipulating the component properties, parameters,
 and subcomponents.
 .
 This package contains the files necessary for running applications that use
 the libical library.
Homepage: http://freeassociation.sourceforge.net
Original-Maintainer: Fathi Boudra <fabo@debian.org>

Package: xorg
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 78
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: amd64
Version: 1:7.6+12ubuntu2
Provides: x-window-system, x-window-system-core
Depends: xserver-xorg (>= 1:7.6+12ubuntu2) | xserver-xorg-renamed, libgl1-mesa-glx | libgl1, libgl1-mesa-dri, libglu1-mesa, xfonts-base (>= 1:1.0.0-1), x11-apps, x11-session-utils, x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils, xauth, xinit, xfonts-utils, xkb-data, xorg-docs-core, xterm | x-terminal-emulator, x11-common, xinput
Recommends: xfonts-scalable (>= 1:1.0.0-1)
Suggests: xorg-docs, xfonts-100dpi (>= 1:1.0.0-1), xfonts-75dpi (>= 1:1.0.0-1)
Description: X.Org X Window System
 This metapackage provides the components for a standalone
 workstation running the X Window System.  It provides the X libraries, an X
 server, a set of fonts, and a group of basic X clients and utilities.
 .
 Higher level metapackages, such as those for desktop environments, can
 depend on this package and simplify their dependencies.
 .
 It should be noted that a package providing x-window-manager should also
 be installed to ensure a comfortable X experience.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libthunar-vfs-1-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: thunar-vfs
Version: 1.2.0-3build1
Depends: libc6 (>= 2.11), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libexo-1-0 (>= 0.5.0), libfam0, libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.18.0), libhal-storage1 (>= 0.5.8.1), libhal1 (>= 0.5.8.1), libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), libstartup-notification0 (>= 0.4), libx11-6, libxfce4util4 (>= 4.3.99.2), libthunar-vfs-1-common
Description: Legacy VFS abstraction used in Xfce
 This package contains a library for virtual file system abstraction. It was
 used by thunar, the file manager of Xfce 4.6, but is now provided for legacy
 compatibility.
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ncurses
Version: 5.9-4
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9-3~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libtelepathy-glib0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2337
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: telepathy-glib
Version: 0.18.2-0ubuntu1
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.92), libglib2.0-0 (>= 2.30.0)
Breaks: telepathy-gabble (<< 0.7.9), telepathy-sofiasip (<< 0.5.17)
Description: Telepathy framework - GLib library
 This package contains telepathy-glib, a GLib-based library for Telepathy
 components.
 .
 Telepathy is a D-Bus framework for unifying real time communication,
 including instant messaging, voice calls and video calls. It abstracts
 differences between protocols to provide a unified interface for
 applications.
Homepage: http://telepathy.freedesktop.org/wiki/
Original-Maintainer: Debian Telepathy maintainers <pkg-telepathy-maintainers@lists.alioth.debian.org>

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4774
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.14.2-6ubuntu2.4
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libxsloader-perl, perl5-base, perlapi-5.14.2
Pre-Depends: libc6 (>= 2.14), dpkg (>= 1.14.20)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libfile-spec-perl (<< 3.3300), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.23), libxsloader-perl (<< 0.13)
Conflicts: doc-base (<< 0.10.3), libxml-sax-perl (<< 0.99+dfsg-1ubuntu0.1), mono-gac (<< 2.10.8.1-1ubuntu1), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libgrip0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgrip
Version: 0.3.5-0ubuntu1~12.04.1
Replaces: libgrip-0.1-0 (<< 0.2.0-0ubuntu1)
Depends: libc6 (>= 2.2.5), libgeis1 (>= 1.0.8), libglib2.0-0 (>= 2.28.6), libgtk-3-0 (>= 3.0.8-0ubuntu1)
Breaks: libgrip-0.1-0 (<< 0.2.0-0ubuntu1)
Description: provides multitouch gestures to GTK+ apps
 .
 Libgrip hooks gesture recognition into GTK+ applications.
Homepage: https://launchpad.net/libgrip

Package: sysv-rc
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 232
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libutempter
Version: 1.1.5-4
Depends: libc6 (>= 2.4), adduser
Description: A privileged helper for utmp/wtmp updates (runtime)
 The libutempter library provides interface for terminal emulators such as
 screen and xterm to record user sessions to utmp and wtmp files.
 .
 The utempter is a privileged helper used by libutempter library to manipulate
 utmp and wtmp files.
Original-Maintainer: Debian Krap Maintainers <debian-qt-kde@lists.debian.org>
Homepage: http://freshmeat.net/projects/libutempter

Package: lib32gcc1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 142
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-4.6 (4.6.3-1ubuntu5)
Version: 1:4.6.3-1ubuntu5
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6-i386 (>= 2.11)
Description: GCC support library (32 bit Version)
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gnome-time-admin
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 2276
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Source: gnome-system-tools
Version: 3.0.0-2ubuntu1
Replaces: gnome-system-tools (<< 2.32.0-0ubuntu6)
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.4), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.0.2), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.26.0), libgtk-3-0 (>= 3.0.0), liboobs-1-5 (>= 3.0.0), libpolkit-gobject-1-0 (>= 0.99), gnome-system-tools
Conflicts: gnome-system-tools (<< 2.32.0-0ubuntu6)
Description: GNOME Time Administration Tool
 The GNOME System Tools are a fully integrated set of tools aimed to make easy
 the job that means the computer administration on an UNIX or Linux system.
 They're thought to help from the new Linux or UNIX user to the system
 administrators.
 .
 This package provides time-admin, a program to specify the time and date
 of your system.
Original-Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>

Package: libcrypto++9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5056
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libcrypto++
Version: 5.6.1-5build1
Depends: libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6)
Description: General purpose cryptographic library - shared library
 General purpose cryptographic library for C++.
 .
 This package contains the shared libraries and should only be
 installed if other packages depend on it.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Homepage: http://www.cryptopp.com

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2000-1
Replaces: timedate
Provides: timedate
Depends: perl
Conflicts: timedate
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/TimeDate/

Package: tlp
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 247
Maintainer: Thomas Koch <linrunner@gmx.net>
Architecture: all
Version: 0.5-1~precise
Depends: pm-utils
Recommends: tlp-rdw, acpid, ethtool, smartmontools, wireless-tools
Suggests: acpi-call, tp-smapi-dkms
Conflicts: pm-utils-powersave-policy
Conffiles:
 /etc/acpi/thinkpad-radiosw.sh 66bbf46d1c31a55636c58b29fce23528
 /etc/acpi/events/thinkpad-radiosw 0d198896c4f2ee4a246de0df2608db2b
 /etc/init.d/tlp f44fdd23e498261fb045f400e47a93ad
 /etc/default/tlp f9bd2a237106683ea210488a8981c26e
 /etc/bash_completion.d/tlp 6458aed8ee31a6c5e0c0207faed8aaa9
Description: Save battery power on laptops
 TLP implements advanced power management for Linux. TLP is a pure
 command line tool with automated background tasks. It does not
 contain a GUI.
Homepage: http://linrunner.de/tlp

Package: language-pack-gnome-en-base
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 7509
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:12.04+20140106
Replaces: language-pack-en (<< 1:12.04+20140106), language-pack-en-base (<< 1:12.04+20140106), language-pack-gnome-en (<< 1:12.04+20140106), language-pack-gnome-en-base (<< 1:12.04+20140106), language-pack-kde-en (<< 1:12.04+20140106), language-pack-kde-en-base (<< 1:12.04+20140106)
Depends: locales (>= 2.3.6), language-pack-gnome-en (>= 1:12.04+20140106)
Pre-Depends: dpkg (>= 1.10.27ubuntu1)
Conflicts: language-pack-gnome-en (<< 1:12.04+20140106)
Description: GNOME translations for language English
 Translation data for all supported GNOME packages for:
 English
 .
 This package provides the bulk of translation data and is updated
 only seldom. language-pack-gnome-en provides frequent
 translation updates, so you should install this as well.

Package: gnustep-base-runtime
Status: install ok installed
Priority: optional
Section: gnustep
Installed-Size: 666
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gnustep-base
Version: 1.22.1-2ubuntu2
Depends: gnustep-base-common (>= 1.22.1-2ubuntu2), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libgnustep-base1.22 (>= 1.22.1), libobjc3 (>= 4.2.1), gnustep-fslayout-fhs, lsb-base
Conffiles:
 /etc/default/gdomap 846c95c589f547187df42f91094ab4d4
 /etc/init.d/gdomap 3b3f411fcef6cce60aefe4819b71c90d
Description: GNUstep Base library - daemons and tools
 The GNUstep Base Library is a powerful fast library of
 general-purpose, non-graphical Objective C classes, inspired by the
 OpenStep API but implementing Apple and GNU additions to the API as
 well.
 .
 This package contains the runtime support files needed by GNUstep
 applications.
Homepage: http://gnustep.org
Original-Maintainer: Debian GNUstep maintainers <pkg-gnustep-maintainers@lists.alioth.debian.org>

Package: mac
Status: install ok installed
Priority: extra
Section: sound
Installed-Size: 542
Maintainer: Alexander Sokolov <sokoloff.a@gmail.com>
Architecture: amd64
Version: 3.99-u4-b5-s7-1precise
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Recommends: shntool, cuetools
Description: Monkey's Audio Codec - command line tool
 Compressor and decompressor of ape files.
 Compiled to be able to convert APE files to FLAC or any other FOSS audio codec ;)
Homepage: http://www.etree.org/shnutils/shntool/support/formats/ape/unix/

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.8.16~exp12ubuntu10.17
Replaces: manpages-pl (<< 20060617-3~)
Depends: ubuntu-keyring, libapt-pkg4.12 (>= 0.8.16~exp12ubuntu10.17), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), gnupg
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: aptitude | synaptic | wajig, dpkg-dev, apt-doc, bzip2, lzma, python-apt
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
 /etc/kernel/postinst.d/apt-auto-removal a2cfbcc7da391b1d29c78769ecf4e9b6
 /etc/cron.daily/apt 24804a562eda58422fd0f084c062ef63
 /etc/apt/apt.conf.d/01autoremove 4a235dbe7ba66310dbeb803664f3e400
 /etc/apt/apt.conf.d/20changelog 8baafd95750e9c31c45512ff7bde7043
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: zeitgeist-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 819
Maintainer: Siegfried-Angel Gevatter Pujals <rainct@ubuntu.com>
Architecture: amd64
Source: zeitgeist
Version: 0.9.0-1ubuntu1
Provides: zeitgeist-extension-fts
Depends: libc6 (>= 2.14), libdee-1.0-4 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.30.0), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.1.1), libxapian22, python-zeitgeist
Suggests: zeitgeist-datahub
Conffiles:
 /etc/bash_completion.d/zeitgeist-daemon d1d81ff1ad068bdd27d0a48485af830e
Description: event logging framework - engine
 Zeitgeist is a service which logs the user's activities and events (files
 opened, websites visited, conversations held with other people, etc.) and
 makes the relevant information available to other applications.
 .
 It serves as a comprehensive activity log and also makes it possible to
 determine relationships between items based on usage patterns.
 .
 This package contains the main daemon (in its new Vala implementation,
 codenamed "Bluebird"). It also includes the FTS (Full Text Search)
 extension.
Homepage: http://zeitgeist-project.com/

Package: libexo-helpers
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Source: exo
Version: 0.10.2-0ubuntu1~ppa0.12.04.1
Replaces: libexo-0.3-0 (<< 0.3.104-3), libexo-common (<< 0.6.2-3)
Description: libexo helpers
 This package contains the helper files in use by exo library for its
 preferred applications framework.
Homepage: http://www.xfce.org
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: libusbmuxd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: usbmuxd
Version: 1.0.7-2ubuntu0.1
Depends: libc6 (>= 2.15), libplist1 (>= 0.16)
Description: USB multiplexor daemon for iPhone and iPod Touch devices - library
 usbmuxd, the USB multiplexor daemon, is in charge of coordinating
 access to iPhone and iPod Touch services over USB. Synchronization and
 management applications for the iPhone and iPod Touch need this daemon
 to communicate with such devices concurrently.
 .
 This package contains the shared library.
Homepage: http://marcansoft.com/blog/iphonelinux/usbmuxd/
Original-Maintainer: gtkpod Maintainers <pkg-gtkpod-devel@lists.alioth.debian.org>

Package: libutouch-evemu1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: utouch-evemu
Version: 1.0.9-0ubuntu1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: KernelInput Event Device Emulation Library
 The evemu library and tools are used to describe devices, record data,
 create emulation devices and replay data from kernel evdev (input event)
 devices.
 .
 This package contains the runtime library used by the evemu-tools and the
 uTouch stack.
Homepage: https://launchpad.net/utouch-evemu

Package: deluge
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.3.5-0ubuntu2~precise2
Replaces: deluge-common (<< 1.2.0~rc1-1)
Depends: python, python-libtorrent (>= 0.14.9), deluge-gtk (= 1.3.5-0ubuntu2~precise2)
Breaks: deluge-common (<< 1.2.0~rc1-1)
Description: bittorrent client written in Python/PyGTK
 Deluge is a full-featured, multi-platform, multi-interface BitTorrent client
 using libtorrent-rasterbar in it's backend and featuring multiple
 user-interfaces: GTK+, web and console.
 .
 It has been designed using the client-server model with a daemon process that
 handles all the bittorrent activity. The Deluge daemon is able to run on
 headless machines with the user-interfaces being able to connect remotely
 from any platform.
 .
 You may want to install this package to use Deluge in classic mode,
 which means the daemon and the GTK+ user-interface are linked together.
Homepage: http://www.deluge-torrent.org/
Original-Maintainer: Cristian Greco <cristian@debian.org>

Package: brasero
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1036
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 3.4.1-0ubuntu1.1
Depends: libbrasero-media3-1 (= 3.4.1-0ubuntu1.1), libc6 (>= 2.4), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgstreamer-plugins-base0.10-0 (>= 0.10.0), libgstreamer0.10-0 (>= 0.10.15), libgtk-3-0 (>= 3.0.0), libice6 (>= 1:1.0.0), liblaunchpad-integration-3.0-1 (>= 0.1.17), libnautilus-extension1a (>= 1:2.91), libpango1.0-0 (>= 1.14.0), libsm6, libtotem-plparser17 (>= 2.32), libxml2 (>= 2.7.4), gstreamer0.10-plugins-base (>= 0.10.0), gnome-icon-theme, gvfs, brasero-common (= 3.4.1-0ubuntu1.1)
Recommends: brasero-cdrkit
Suggests: vcdimager, libdvdcss2
Conflicts: nautilus-cd-burner
Description: CD/DVD burning application for GNOME
 Brasero is a simple application to burn, copy and erase CD and DVD
 media: audio, video or data. It features among other things:
  * On-the-fly burning
  * Multisession support
  * On-the-fly conversion of music playlists in all formats supported by
    GStreamer
 .
 This package contains the main binary, the burning plugins and the
 nautilus extension.
 .
 The following packages, if installed, will provide Brasero with added
 functionality:
  * cdrdao to burn combined data/audio CDs and for byte-to-byte copy
  * GStreamer backends to support more audio formats
  * vcdimager to create VCDs or SVCDs
  * libdvdcss2 to copy encrypted DVDs
Homepage: http://www.gnome.org/projects/brasero/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gnustep-common
Status: install ok installed
Priority: optional
Section: gnustep
Installed-Size: 315
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gnustep-make
Version: 2.6.1-1
Replaces: gnustep-make
Provides: gnustep-fslayout-fhs
Depends: autotools-dev
Suggests: gnustep-base-common
Conffiles:
 /etc/GNUstep/GNUstep.conf 9ba35f0cbadd8e193f78bcb43c606b20
Description: Common files for the core GNUstep environment
 This package contains the common files, scripts and directory layout
 needed to run any GNUstep software.
Original-Maintainer: Debian GNUstep maintainers <pkg-gnustep-maintainers@lists.alioth.debian.org>
Homepage: http://gnustep.org

Package: vorbis-tools
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 400
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.4.0-1ubuntu2
Depends: libao4 (>= 1.1.0), libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2-1), libflac8 (>= 1.2.1), libogg0 (>= 1.1.0), libspeex1 (>= 1.2~beta3-1), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.2.3)
Description: several Ogg Vorbis tools
 vorbis-tools contains oggenc (an encoder), ogg123 (a playback tool),
 ogginfo (displays ogg information), oggdec (decodes ogg files), vcut
 (ogg file splitter), and vorbiscomment (ogg comment editor).
 .
 ogg123 can play both Ogg Vorbis and FLAC audio streams.
Original-Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>

Package: thunderbird-globalmenu
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 130
Maintainer: Ubuntu Mozilla Team <ubuntu-mozillateam@lists.ubuntu.com>
Architecture: amd64
Source: thunderbird
Version: 1:31.0+build1-0ubuntu0.12.04.1
Depends: thunderbird
Description: Email, RSS and newsgroup client (transitional package)
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: libmtp9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 413
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libmtp
Version: 1.1.3-1ubuntu0.1
Depends: libc6 (>= 2.14), libusb-1.0-0 (>= 2:1.0.9~rc3), libmtp-common
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: udev, libmtp-runtime
Description: Media Transfer Protocol (MTP) library
 libmtp is a library for communicating with MTP aware devices in POSIX
 compliant operating systems.  It implements MTP Basic, the subset
 proposed for standardization.
 .
 The Media Transfer Protocol (commonly referred to as MTP) is a devised
 set of custom extensions to support the transfer of music files on
 USB digital audio players and movie files on USB portable media players.
Original-Maintainer: Alessio Treglia <alessio@debian.org>
Homepage: http://libmtp.sourceforge.net/

Package: mp3info
Status: install ok installed
Priority: extra
Section: sound
Installed-Size: 100
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: amd64
Version: 0.8.5a-1
Depends: debconf | debconf-2.0, libc6 (>= 2.4), libncurses5 (>= 5.6+20071006-3)
Description: An MP3 technical info viewer and ID3 1.x tag editor
 MP3Info has an interactive mode (using curses) and a command line mode.
 MP3Info can display ID3 tag information as well as various technical aspects
 of an MP3 file including playing time, bit-rate, sampling frequency and other
 attributes in a pre-defined or user-specifiable output format.
 .
 If you prefer GUI you should use mp3info-gtk package.
Original-Maintainer: Paweł Więcek <coven@debian.org>
Homepage: http://www.ibiblio.org/mp3info/

Package: bluez
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 2466
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.98-2ubuntu7.2
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libc6 (>= 2.15), libcap-ng0, libdbus-1-3 (>= 1.1.1), libglib2.0-0 (>= 2.28.0), libreadline6 (>= 6.0), libudev0 (>= 147), libusb-0.1-4 (>= 2:0.1.12), upstart-job, module-init-tools, udev (>= 170-1), lsb-base, dbus, python-dbus
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: udev (<< 170-1)
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Conffiles:
 /etc/bluetooth/rfcomm.conf 0a87d3eddd29683c1456688907e67b4f
 /etc/bluetooth/main.conf 040f452803430c8c9b95f50c60e43b4b
 /etc/bluetooth/network.conf 0c7497c405b963382ff71789d0730abd
 /etc/bluetooth/audio.conf c2ee67e4141ac548f5bc49634f44018a
 /etc/bluetooth/serial.conf 5dcc15dd1153ddebbd41612da9b642e5
 /etc/bluetooth/input.conf 4bebcedeed8770b1aea07eefc5c35a52
 /etc/bluetooth/proximity.conf b75823a140e00905d41465c380bf89fe
 /etc/init/bluetooth.conf e6b0122c1e5cd56016859a0767a8cfcb
 /etc/dbus-1/system.d/bluetooth.conf ab36f00296c5d1f7ce78db671fb4338a
Description: Bluetooth tools and daemons
 This package contains tools and system daemons for using Bluetooth devices.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Original-Maintainer: Debian Bluetooth Maintainers <pkg-bluetooth-maintainers@lists.alioth.debian.org>

Package: libdconf0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: d-conf
Version: 0.12.0-0ubuntu1.1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.31.8)
Pre-Depends: multiarch-support
Breaks: dconf-gsettings-backend (<< 0.10.0)
Description: simple configuration storage system - runtime library
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains the runtime library.
Homepage: http://live.gnome.org/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: policykit-desktop-privileges
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 47
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.10
Recommends: policykit-1
Description: run common desktop actions without password
 This package provides a set of PolicyKit privileges which allow Administrators
 to run common actions without being asked for their password:
 .
  * mounting and checking internal disk drives (through udisks)
  * setting the CPU speed and policy (through the GNOME CPU frequency applet)
  * setting the time and timezone (through the GNOME clock applet or through
    KDE)
  * Adding/changing system-wide NetworkManager connections
  * Update already installed software
  * Configure printers
 .
 It does not change privileges for non-Administrators (users who are not in the
 "admin" or "sudo" group). So this satisfies the typical desktop/laptop use
 case where the user has full control over the hardware anyway.
 .
 This is implemented by shipping a pklocalauthority(8) file.

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.26+nmu1ubuntu1
Suggests: sgml-base-doc
Conflicts: sgml-data (<= 0.02), sgmltools-2 (<= 2.0.2-4)
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxslt1.1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 473
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxslt
Version: 1.1.26-8ubuntu1.3
Depends: libc6 (>= 2.14), libgcrypt11 (>= 1.4.5), libxml2 (>= 2.7.4)
Pre-Depends: multiarch-support
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxslt1.1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 466
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libxslt
Version: 1.1.26-8ubuntu1.3
Depends: libc6 (>= 2.4), libgcrypt11 (>= 1.4.5), libxml2 (>= 2.7.4)
Pre-Depends: multiarch-support
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: wine1.4
Status: install ok installed
Multi-Arch: allowed
Priority: optional
Section: otherosfs
Installed-Size: 2748
Maintainer: Scott Ritchie <scottritchie@ubuntu.com>
Architecture: amd64
Version: 1.4-0ubuntu4.1
Replaces: ttf-symbol-replacement, ttf-symbol-replacement-wine1.3, ttf-tahoma-replacement, wine, wine1.0, wine1.2, wine1.3
Provides: wine
Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.14), libgettextpo0, wine1.4-amd64 (= 1.4-0ubuntu4.1), binfmt-support (>= 1.1.2), procps, wine1.4-i386 (= 1.4-0ubuntu4.1)
Pre-Depends: dpkg (>= 1.15.7.2~)
Recommends: cups-bsd, gnome-exe-thumbnailer | kde-runtime, ttf-droid, ttf-liberation, ttf-mscorefonts-installer, ttf-umefont, ttf-unfonts-core, ttf-wqy-microhei, winbind, winetricks, xdg-utils
Breaks: ttf-symbol-replacement, ttf-symbol-replacement-wine1.3, ttf-tahoma-replacement, wine (<< 1.2.1), wine1.2 (<< 1.4-0ubuntu1), wine1.3 (<< 1.4-0ubuntu1)
Conflicts: wine1.0
Conffiles:
 /etc/xdg/menus/applications-merged/wine.menu d15dadc3527b2c6dca96023a5351aedc
Description: Microsoft Windows Compatibility Layer (Binary Emulator and Library)
 Wine is a compatibility layer for running Windows applications on Linux.
 Applications are run at full speed without the need of cpu emulation. Wine
 does not require Microsoft Windows, however it can use native system dll
 files in place of its own if they are available.
 .
 This package includes a program loader for running unmodified Windows
 executables as well as the Wine project's free version of the Windows API for
 running programs ported from Windows.
Homepage: http://www.winehq.org/

Package: libxfce4util-common
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 749
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: all
Source: libxfce4util
Version: 4.10.1-0ubuntu1~ppa0.12.04.1
Replaces: libxfce4util4 (<< 4.6.1-2)
Breaks: libxfce4util4 (<< 4.6.1-2)
Description: common files for libxfce4util
 This package contains various infrastructure-independant common files for
 libxfce4util, the Xfce utility library.
Homepage: http://www.xfce.org/

Package: libswitch-perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.16-2
Depends: perl, perl-modules
Description: switch statement for Perl
 Switch.pm implements a generalized case mechanism that covers many
 possible combinations of switch and case values.
 .
 This is an obsolete module provided for compatiblity since it is being
 removed from the core. For perl 5.10 and above the "given/when" builtins
 are much preferred.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: http://search.cpan.org/dist/Switch/

Package: libisc83
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 390
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.8.1.dfsg.P1-4ubuntu0.8
Replaces: libbind0
Depends: libc6 (>= 2.15), libxml2 (>= 2.7.4)
Conflicts: libbind0, libbind9-41
Description: ISC Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libisc shared library used by BIND's daemons and
 clients.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libopenal-data
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: openal-soft
Version: 1:1.13-4ubuntu3
Replaces: libopenal1 (<< 1:1.13-3)
Breaks: libopenal1 (<< 1:1.13-3)
Conffiles:
 /etc/openal/alsoft.conf 516f7a2891d1897ad0b621929e54bed1
Description: Software implementation of the OpenAL API (data files)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This library is meant as a compatible update/replacement to the OpenAL Sample
 Implementation (the SI). The SI has been unmaintained for quite a while, and
 would require a lot of work to clean up. This is a fork the old Windows version
 to attempt an accelerated ALSA version of an OpenAL implementation.
 .
 OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as
 opposed to the SI's 4-channel max (though it did have some provisions for 6
 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft
 does not support the Vorbis and MP3 extensions, however those were considered
 deprecated even in the SI. It does, though, support some of the newer
 extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and
 floating-point formats, as well as ALC_EXT_EFX for environmental audio effects,
 and others.
 .
 This package installs data files used by the OpenAL Soft shared library.
Homepage: http://kcat.strangesoft.net/openal.html
Original-Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>

Package: wfrench
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 1600
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.2.3-9
Provides: wordlist
Depends: debconf (>= 0.5) | debconf-2.0, dictionaries-common (>= 0.20), debconf
Description: French dictionary words for /usr/share/dict
 This package provides the file /usr/share/dict/french
 containing a list of French words.  This list can be used by spelling
 checkers, and by programs such as look(1).
Original-Maintainer: Francois Marier <francois@debian.org>

Package: pciutils
Status: install ok installed
Multi-Arch: foreign
Priority: standard
Section: admin
Installed-Size: 1042
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.1.8-2ubuntu6
Depends: libc6 (>= 2.14), libpci3 (= 1:3.1.8-2ubuntu6)
Suggests: bzip2, wget | curl | lynx
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: python-cssutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1297
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: cssutils
Version: 0.9.8-1ubuntu2
Replaces: python-cssutils-doc, python-encutils
Provides: python-encutils
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-pkg-resources
Description: CSS Cascading Style Sheets parser and builder
 Package to parse and build CSS Cascading Style Sheets. DOM only, not any
 rendering facilities! Base upon and partly implements the following
 specifications:
 .
   * CSS 2.1 and CSS 2.1 Errata
   * CSS3 Module: Syntax
   * DOM Level 2 Style CSS
   * DOM Level 2 Style Stylesheets
   * CSSOM
   * MediaQueries
   * Namespaces
   * Selectors
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://bitbucket.org/cthedot/cssutils

Package: libvlc5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vlc
Version: 2.0.8-0ubuntu0.12.04.1
Replaces: vlc (<< 0.8.6.c-6)
Depends: libc6 (>= 2.14), libvlccore5 (>= 2.0.0)
Description: multimedia player and streamer library
 This package contains the shared library required by applications using VLC
 features.
 .
 VLC is the VideoLAN project's media player. It plays MPEG, MPEG-2, MPEG-4,
 DivX, MOV, WMV, QuickTime, WebM, FLAC, MP3, Ogg/Vorbis files, DVDs, VCDs,
 podcasts, and multimedia streams from various network sources.
Homepage: http://www.videolan.org/vlc/
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: rfkill
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.4-1ubuntu2
Depends: libc6 (>= 2.4), upstart-job
Conffiles:
 /etc/init/rfkill-store.conf 086333623d9d1e0f712f5bca6059e9ab
 /etc/init/rfkill-restore.conf 74e0f50df02b17aa4ac8684822969cbc
Description: tool for enabling and disabling wireless devices
 rfkill is a simple tool for accessing the Linux rfkill device interface,
 which is used to enable and disable wireless networking devices, typically
 WLAN, Bluetooth and mobile broadband.
 .
 rfkill uses /dev/rfkill, which is present in Linux kernel 2.6.31 and later.
Homepage: http://wireless.kernel.org/en/users/Documentation/rfkill
Original-Maintainer: Darren Salt <linux@youmustbejoking.demon.co.uk>

Package: libunistring0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libunistring
Version: 0.9.3-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Original-Maintainer: Andreas Rottmann <rotty@debian.org>
Homepage: http://www.gnu.org/software/libunistring/

Package: libdbus-glib-1-2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 226
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-glib
Version: 0.98-1ubuntu1.1
Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.2.16), libglib2.0-0 (>= 2.31.8)
Pre-Depends: multiarch-support
Description: simple interprocess messaging system (GLib-based shared library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides the GLib-based shared library for applications using the
 GLib interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: vorbisgain
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 96
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.36-3.1ubuntu2
Depends: libc6 (>= 2.7), libogg0 (>= 1.0rc3), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2)
Description: add Replay Gain volume tags to Ogg Vorbis files
 vorbisgain calculates a percieved volume of an Ogg Vorbis file using
 the Replay Gain algorithm. It then stores a per-track and per-album
 volume adjustment in the file's tags, to let songs play back  with a
 uniform volume. The process is non-destructive and does not change the
 audio data at all.
 .
 Many audio players in Debian support reading these tags, including XMMS,
 Quod Libet, amaroK, Muine, and Rhythmbox.
Original-Maintainer: Joe Wreschnig <piman@debian.org>

Package: tzdata-java
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: java
Installed-Size: 357
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: tzdata
Version: 2014e-0ubuntu0.12.04
Depends: tzdata (= 2014e-0ubuntu0.12.04)
Description: time zone and daylight-saving time data for use by java runtimes
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
 .
 This package contains the data for use by Java runtimes.
Homepage: http://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: icedtea-netx
Status: install ok installed
Multi-Arch: same
Priority: extra
Section: java
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: icedtea-web
Version: 1.2.3-0ubuntu0.12.04.4
Replaces: openjdk-6-jre (<< 6b18-1.8.7-3), openjdk-6-jre-headless (<< 6b18-1.8.7-3)
Depends: icedtea-netx-common (>= 1.2.3-0ubuntu0.12.04.4), openjdk-6-jre (>= 6b23~pre10~) | openjdk-7-jre
Conflicts: openjdk-6-jre (<< 6b18-1.8.7-3), openjdk-6-jre-headless (<< 6b18-1.8.7-3)
Description: NetX - implementation of the Java Network Launching Protocol (JNLP)
 NetX provides a drop-in replacement for javaws (Java Web Start). Since
 upstream NetX is dormant, IcedTea is hosting and modifying the sources
 in the IcedTea-Web directory.
 .
 IcedTea's NetX currently supports verification of signed jars, trusted
 certificate storing, system certificate store checking, and provides
 the services specified by the jnlp API.
Homepage: http://icedtea.classpath.org/wiki/IcedTea-Web
Original-Maintainer: OpenJDK Team <openjdk@lists.launchpad.net>

Package: python-beautifulsoup
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: beautifulsoup
Version: 3.2.0-2build1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Recommends: python-chardet
Description: error-tolerant HTML parser for Python
 The BeautifulSoup class turns arbitrarily bad HTML into a tree-like nested
 tag-soup list of Tag objects and text snippets. A Tag object corresponds to
 an HTML tag.  It knows about the HTML tag's attributes, and contains a
 representation of everything contained between the original tag and its
 closing tag (if any). It's easy to extract Tags that meet certain criteria.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://www.crummy.com/software/BeautifulSoup

Package: ruby-gtk2
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 2865
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ruby-gnome2
Version: 1.0.3-1build1
Replaces: libgtk-trayicon-ruby1.8, libgtk2-ruby (<< 0.90.9-1~), libgtk2-ruby1.8 (<< 0.90.9-1~)
Provides: libgtk2-ruby, libgtk2-ruby1.8
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.20.0), libpango1.0-0 (>= 1.14.0), libruby1.8 (>= 1.8.7.352), libruby1.9.1 (>= 1.9.2.0), libx11-6, ruby-atk (= 1.0.3-1build1), ruby-pango (= 1.0.3-1build1), ruby-gdk-pixbuf2 (= 1.0.3-1build1)
Breaks: libgtk2-ruby (<< 0.90.9-1~), libgtk2-ruby1.8 (<< 0.90.9-1~)
Conflicts: libgda-ruby1.8, libgtk-trayicon-ruby1.8
Description: GTK+ bindings for the Ruby language
 GTK+ is a library for creating graphical user interfaces. This package
 contains libraries for using GTK+ with the Ruby programming language.
Original-Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: http://ruby-gnome2.sourceforge.jp/

Package: libquicktime2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1004
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libquicktime
Version: 2:1.2.3-4build2
Depends: libavcodec53 (>= 4:0.8~beta2-2) | libavcodec-extra-53 (>= 4:0.8~beta2-2), libc6 (>= 2.11), libdv4, libfaad2, libjpeg8 (>= 8c), libmp3lame0, libpng12-0 (>= 1.2.13-4), libschroedinger-1.0-0 (>= 1.0.0), libswscale2 (>= 4:0.8~beta2-2) | libswscale-extra-2 (>= 4:0.8~beta2-2), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libx264-120, zlib1g (>= 1:1.1.4)
Description: library for reading and writing Quicktime files
 libquicktime is a library for reading and writing QuickTime files on UNIX
 systems. Video CODECs supported by this library are OpenDivX, MJPA, JPEG Photo,
 PNG, RGB, YUV 4:2:2, and YUV 4:2:0 compression. Supported audio CODECs are Ogg
 Vorbis, IMA4, ulaw, and any linear PCM format.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://libquicktime.sourceforge.net/

Package: libcapi20-3
Status: install ok installed
Multi-Arch: same
Priority: extra
Section: libs
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isdnutils
Version: 1:3.12.20071127-0ubuntu11
Replaces: isdnutils (<< 1:3.1pre1b-0), libcapi20, libcapi20-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libcapi20, libcapi20-2
Description: libraries for CAPI support
 If you have an ISDN card with which CAPI works, you may be able to use
 applications that use CAPI, e.g. a fax system. At this point, AVM cards can
 work with CAPI, as well as some active cards. For the AVM passive cards you
 need to visit the www.AVM.de website.
 .
 If you need this package, it will be installed automatically via dependencies,
 no need to select it yourself.
Original-Maintainer: Paul Slootman <paul@debian.org>

Package: libcapi20-3
Status: install ok installed
Multi-Arch: same
Priority: extra
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: isdnutils
Version: 1:3.12.20071127-0ubuntu11
Replaces: isdnutils (<< 1:3.1pre1b-0), libcapi20, libcapi20-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libcapi20, libcapi20-2
Description: libraries for CAPI support
 If you have an ISDN card with which CAPI works, you may be able to use
 applications that use CAPI, e.g. a fax system. At this point, AVM cards can
 work with CAPI, as well as some active cards. For the AVM passive cards you
 need to visit the www.AVM.de website.
 .
 If you need this package, it will be installed automatically via dependencies,
 no need to select it yourself.
Original-Maintainer: Paul Slootman <paul@debian.org>

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1699
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: manpages
Version: 3.35-0.1ubuntu1
Replaces: glibc-doc (<< 2.11.2-3), libaio-dev
Depends: manpages
Suggests: man-browser
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc package).
Homepage: http://www.kernel.org/doc/man-pages/
Original-Maintainer: Martin Schulze <joey@debian.org>

Package: ubuntu-standard
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.267.1
Depends: at, busybox-static, cpio, cron, dmidecode, dnsutils, dosfstools, ed, file, ftp, hdparm, info, iptables, language-selector-common, logrotate, lshw, lsof, ltrace, man-db, memtest86+, mime-support, parted, pciutils, popularity-contest, psmisc, rsync, strace, time, usbutils, wget
Recommends: apparmor, apt-transport-https, bash-completion, command-not-found, friendly-recovery, iputils-tracepath, irqbalance, manpages, mlocate, mtr-tiny, nano, ntfs-3g, openssh-client, plymouth, plymouth-theme-ubuntu-text, ppp, pppconfig, pppoeconf, tcpdump, telnet, ufw, update-manager-core, uuid-runtime
Description: The Ubuntu standard system
 This package depends on all of the packages in the Ubuntu standard system.
 This set of packages provides a comfortable command-line Unix-like
 environment.
 .
 It is also used to help ensure proper upgrades, so it is recommended that
 it not be removed.

Package: libxres1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libxres
Version: 2:1.0.5-1ubuntu0.1
Depends: libc6 (>= 2.2.5), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common
Description: X11 Resource extension library
 libXRes provides an X Window System client interface to the Resource
 extension to the X protocol.
 .
 The Resource extension allows for X clients to see and monitor the X resource
 usage of various clients (pixmaps, et al).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXRes
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: xfce4-clipman-plugin
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 122
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 2:1.2.5-1~ppa0.12.04.1
Depends: libc6 (>= 2.4), libexo-1-0 (>= 0.5.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.18.0), libgtk2.0-0 (>= 2.24.0), libx11-6, libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), libxtst6, xfce4-panel (>= 4.9.2), xfce4-clipman (>= 2:1.1.3-4.1)
Description: clipboard history plugin for Xfce panel
 Clipman enables you to store and recall X selections, as well as GTK+
 clipboard content. You can also define actions to be triggered by selecting
 some text pattern.
 .
 This package contains the Xfce panel plugin.
Homepage: http://goodies.xfce.org/

Package: xfwm4-themes
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 4288
Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>
Architecture: all
Version: 4.10.0-0ubuntu1~ppa1
Replaces: xfwm4 (<< 4.10.0)
Depends: xfwm4 (>= 4.10.0)
Breaks: xfwm4 (<< 4.10.0)
Description: Theme files for xfwm4
 This package contains several theme files for xfwm4,
 the window manager of the Xfce4 project. If you are
 unsatisfied with its default theme, then installing
 this package might be a good idea.
Homepage: http://www.xfce.org/

Package: grub-common
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 5048
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: grub2
Version: 1.99-21ubuntu3.16
Replaces: grub-coreboot (<< 1.99-1), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 1.99-1), grub-efi-ia32 (<< 1.99-1), grub-ieee1275 (<< 1.99-1), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 1.99-1), grub-yeeloong (<< 1.99-1)
Depends: libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.36), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.1), gettext-base, lsb-base (>= 3.0-6)
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6)
Breaks: friendly-recovery (<< 0.2.13), lupin-support (<< 0.30)
Conflicts: mdadm (<< 2.6.7-2)
Conffiles:
 /etc/grub.d/30_uefi-firmware a6e6f48d040c8f64da0e8aa44b2b702f
 /etc/grub.d/30_os-prober d472f794c74ebdba053daed93839d4d4
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
 /etc/grub.d/05_debian_theme aec4119832bdfdf90e247a74f26a7d85
 /etc/grub.d/41_custom 50fe323bbb00abdf77271f8e87dc175c
 /etc/grub.d/00_header 6aacc2ba93feffafa3129685c45d8ab5
 /etc/grub.d/10_linux beb12bd34b7ca8bc045606c389481085
 /etc/grub.d/20_linux_xen 2f296660ea0f3b90961a588b264ce6c3
 /etc/bash_completion.d/grub cf52e83153e368b56b4406d07c9bc640
 /etc/pm/sleep.d/10_grub-common bc63b0c6613e95979446d17a88875d6a
 /etc/init.d/grub-common f5078cf9df66751dec9ae8f7baf4a0c2
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
Homepage: http://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>

Package: liblangtag-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1447
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: all
Source: liblangtag
Version: 0.5.1-2~precise2
Description: library to access tags for identifying languages -- data
 liblangtag is an interface library to access/deal with tags for
 identifying languages, which is described in RFC 5646
 .
 This package contains the architecture-independent language data.
Homepage: http://tagoh.bitbucket.org/liblangtag/

Package: mtools
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.0.12-1ubuntu0.12.04.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Suggests: floppyd
Conffiles:
 /etc/mtools.conf 659bb18a4490dcb17ad0b0139c2fb654
Description: Tools for manipulating MSDOS files
 Mtools is a collection of utilities to access MS-DOS disks from Unix
 without mounting them. It supports Win'95 style long file names, OS/2
 Xdf disks, ZIP/JAZ disks and 2m disks (store up to 1992kB on a high
 density 3 1/2 disk).
 .
 Also included in this package are commands to eject and manipulate
 the write/password protection control of Zip disks.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.mtools.linux.lu/

Package: gedit
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 2716
Maintainer: Ubuntu Desktop Team <ubuntu-desktop@lists.ubuntu.com>
Architecture: amd64
Version: 3.4.1-0ubuntu1
Replaces: gedit-dev (<< 3.3.7-0ubuntu2)
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.14), libcairo2 (>= 1.2.4), libenchant1c2a (>= 1.6), libgdk-pixbuf2.0-0 (>= 2.22.0), libgirepository-1.0-1 (>= 0.9.3), libglib2.0-0 (>= 2.31.18), libgtk-3-0 (>= 3.3.15), libgtksourceview-3.0-0 (>= 3.0.0), libice6 (>= 1:1.0.0), liblaunchpad-integration-3.0-1 (>= 0.1.17), libpango1.0-0 (>= 1.14.0), libpeas-1.0-0 (>= 1.1.0), libsm6, libx11-6, libxml2 (>= 2.7.4), libzeitgeist-1.0-1 (>= 0.3.2), gir1.2-atk-1.0, gir1.2-freedesktop, gir1.2-gdkpixbuf-2.0, gir1.2-glib-2.0, gir1.2-gtk-3.0, gir1.2-gtksource-3.0, gir1.2-pango-1.0, gedit-common (>= 3.4), gedit-common (<< 3.5), gsettings-desktop-schemas, python-gi, gir1.2-peas-1.0, iso-codes
Recommends: zenity, yelp
Breaks: gedit-plugins (<< 2.91)
Description: official text editor of the GNOME desktop environment
 gedit is a text editor which supports most standard editor features,
 extending this basic functionality with other features not usually
 found in simple text editors. gedit is a graphical application which
 supports editing multiple text files in one window (known sometimes as
 tabs or MDI).
 .
 gedit fully supports international text through its use of the Unicode
 UTF-8 encoding in edited files. Its core feature set includes syntax
 highlighting of source code, auto indentation and printing and print preview
 support.
 .
 gedit is also extensible through its plugin system, which currently
 includes support for spell checking, comparing files, viewing CVS
 ChangeLogs, and adjusting indentation levels.
Homepage: http://www.gnome.org/projects/gedit/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgrail5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: grail
Version: 3.0.6-0ubuntu0.12.04.01
Depends: libc6 (>= 2.14), libframe6 (>= 2.2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: Gesture Recognition And Instantiation Library
 This library consists of an interface and tools for handling gesture
 recognition and gesture instantiation. Applications can use the grail
 callbacks to receive gesture primitives and raw input events from the
 underlying kernel device.
Homepage: https://launchpad.net/grail

Package: gir1.2-dbusmenu-gtk-0.4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdbusmenu
Version: 0.6.2-0ubuntu0.2
Depends: libdbusmenu-gtk4 (= 0.6.2-0ubuntu0.2), gir1.2-atk-1.0, gir1.2-dbusmenu-glib-0.4 (= 0.6.2-0ubuntu0.2), gir1.2-freedesktop, gir1.2-gdkpixbuf-2.0, gir1.2-glib-2.0, gir1.2-gtk-2.0, gir1.2-pango-1.0
Description: typelib file for libdbusmenu-gtk4
 libdbusmenu passes a menu structure across DBus so that a program can
 create a menu simply without worrying about how it is displayed on the
 other side of the bus.
 .
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings for libdbusmenu-gtk4.
Homepage: https://launchpad.net/dbusmenu
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>

Package: libgif4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: giflib
Version: 4.1.6-9ubuntu1
Provides: libungif4g
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for GIF images (library)
 GIFLIB is a package of portable tools and library routines for working with GIF
 images.
 .
 This package contains the library.
Homepage: http://giflib.sourceforge.net/
Original-Maintainer: Thibaut GRIDEL <tgridel@free.fr>

Package: libgif4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: giflib
Version: 4.1.6-9ubuntu1
Provides: libungif4g
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for GIF images (library)
 GIFLIB is a package of portable tools and library routines for working with GIF
 images.
 .
 This package contains the library.
Homepage: http://giflib.sourceforge.net/
Original-Maintainer: Thibaut GRIDEL <tgridel@free.fr>

Package: accountsservice
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 316
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.6.15-2ubuntu9.7
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libglib2.0-0 (>= 2.25.11), libpolkit-gobject-1-0 (>= 0.99), libaccountsservice0 (= 0.6.15-2ubuntu9.7), dbus
Suggests: gnome-control-center
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.Accounts.conf 06247d62052029ead7d9ec1ef9457f42
Description: query and manipulate user account information
 The AccountService project provides a set of D-Bus
 interfaces for querying and manipulating user account
 information and an implementation of these interfaces,
 based on the useradd, usermod and userdel commands.
Homepage: http://cgit.freedesktop.org/accountsservice/
Original-Maintainer: Alessio Treglia <alessio@debian.org>

Package: mtr-tiny
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mtr
Version: 0.80-1ubuntu1
Replaces: mtr
Depends: libc6 (>= 2.4), libncurses5 (>= 5.5-5~)
Conflicts: mtr, suidmanager (<< 0.50)
Description: Full screen ncurses traceroute tool
 mtr combines the functionality of the 'traceroute' and 'ping' programs
 in a single network diagnostic tool.
 .
 As mtr starts, it investigates the network connection between the host
 mtr runs on and a user-specified destination host.  After it
 determines the address of each network hop between the machines,
 it sends a sequence ICMP ECHO requests to each one to determine the
 quality of the link to each machine.  As it does this, it prints
 running statistics about each machine.
 .
 mtr-tiny is compiled without support for X and conserves disk space.
Homepage: http://www.bitwizard.nl/mtr/
Original-Maintainer: Robert Woodcock <rcw@debian.org>

Package: libisccfg82
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.8.1.dfsg.P1-4ubuntu0.8
Replaces: libbind0
Depends: libc6 (>= 2.14), libdns81, libisc83, libisccc80
Conflicts: libbind0, libbind9-41
Description: Config File Handling Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libisccfg shared library used by BIND's daemons
 and clients to read and write ISC-style configuration files like named.conf
 and rndc.conf.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: xserver-xorg-core
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 4168
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: amd64
Source: xorg-server
Version: 2:1.11.4-0ubuntu10.14
Provides: xorg-input-abi-16, xorg-video-abi-11
Depends: xserver-common (>= 2:1.11.4-0ubuntu10.14), keyboard-configuration, udev (>= 149), libc6 (>= 2.15), libdrm2 (>= 2.3.1), libgcrypt11 (>= 1.4.5), libpciaccess0 (>= 0.10.7), libpixman-1-0 (>= 0.21.6), libudev0 (>= 147), libxau6, libxdmcp6, libxfont1 (>= 1:1.4.2)
Recommends: libgl1-mesa-dri (>= 7.10.2-4)
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Breaks: libgl1-mesa-dri (<< 7.10.2-4), libgl1-mesa-dri-experimental (<< 7.10.2-4), qt4-x11 (<< 4:4.8.0-1ubuntu2), unity (<< 5.0.0), utouch-frame (<< 2.1.0), utouch-geis (<< 2.2.3), xserver-xorg-input, xserver-xorg-input-2, xserver-xorg-input-2.1, xserver-xorg-input-4, xserver-xorg-input-7, xserver-xorg-input-joystick (<= 1:1.5.0-3), xserver-xorg-input-synaptics (<= 1.2.2-1ubuntu4), xserver-xorg-input-tslib (<= 0.0.6-3), xserver-xorg-input-vmmouse (<= 1:12.6.5-4ubuntu2), xserver-xorg-input-wacom (<= 0.10.5+20100415-1), xserver-xorg-video, xserver-xorg-video-1.0, xserver-xorg-video-1.9, xserver-xorg-video-2, xserver-xorg-video-4, xserver-xorg-video-5, xserver-xorg-video-6, xserver-xorg-video-cyrix (<= 1:1.1.0-8), xserver-xorg-video-i810 (<< 2:2.4), xserver-xorg-video-imstt (<= 1:1.1.0-7), xserver-xorg-video-nsc (<= 1:2.8.3-4), xserver-xorg-video-sunbw2 (<= 1:1.1.0-5), xserver-xorg-video-v4l (<< 1:0.2.0), xserver-xorg-video-vga (<= 1:4.1.0-8)
Description: Xorg X server - core server
 The Xorg X server is an X server for several architectures and operating
 systems, which is derived from the XFree86 4.x series of X servers.
 .
 The Xorg server supports most modern graphics hardware from most vendors,
 and supersedes all XFree86 X servers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This package is built from the X.org xserver module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: librdf0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 294
Maintainer: Dave Beckett <dajobe@debian.org>
Architecture: amd64
Source: redland
Version: 1.0.17-1~precise1
Depends: libc6 (>= 2.14), libdb5.1, libltdl7 (>= 2.4.2), libraptor2-0 (>= 2.0.12), librasqal3 (>= 0.9.31)
Pre-Depends: multiarch-support
Suggests: librdf-storage-postgresql, librdf-storage-mysql, librdf-storage-sqlite, librdf-storage-virtuoso, redland-utils
Description: Redland Resource Description Framework (RDF) library
 Redland is a library that provides a high-level interface for RDF
 (Resource Description Framework) implemented in an object-based API.
 It is modular and supports different RDF/XML parsers, storage
 mechanisms and other elements. Redland is designed for applications
 developers to provide RDF support in their applications as well as
 for RDF developers to experiment with the technology.
 .
 This package includes the core file-based storages.  To get database
 backed storages, the librdf-storage-postgresql, librdf-storage-mysql,
 librdf-storage-sqlite or librdf-storage-virtuoso packages should be
 installed.
Homepage: http://librdf.org/

Package: libqt4-declarative
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 4236
Maintainer: Kubuntu Developers <kubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Source: qt4-x11
Version: 4:4.8.1-0ubuntu4.8
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libqt4-network (= 4:4.8.1-0ubuntu4.8), libqt4-script (= 4:4.8.1-0ubuntu4.8), libqt4-sql (= 4:4.8.1-0ubuntu4.8), libqt4-xmlpatterns (= 4:4.8.1-0ubuntu4.8), libqtcore4 (= 4:4.8.1-0ubuntu4.8), libqtgui4 (= 4:4.8.1-0ubuntu4.8), libstdc++6 (>= 4.1.1)
Pre-Depends: multiarch-support
Suggests: libqt4-declarative-folderlistmodel, libqt4-declarative-gestures, libqt4-declarative-particles, libqt4-declarative-shaders, qt4-qmlviewer
Description: Qt 4 Declarative module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The Qt Declarative module provides a declarative framework for building highly
 dynamic, custom user interfaces.
Homepage: http://qt.nokia.com/
Original-Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>

Package: libk5crypto3
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.5
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.14), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa), libkrb53 (<< 1.6.dfsg.4~beta1-9)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libk5crypto3
Status: install ok installed
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 235
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: krb5
Version: 1.10+dfsg~beta1-2ubuntu0.5
Replaces: libkrb53 (<< 1.6.dfsg.4~beta1-7)
Depends: libc6 (>= 2.4), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa), libkrb53 (<< 1.6.dfsg.4~beta1-9)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 512
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dnsmasq
Version: 2.59-4ubuntu0.1
Replaces: dnsmasq (<< 2.59-4ubuntu0)
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.1.1), libidn11 (>= 1.13), libnetfilter-conntrack3 (>= 0.9.1)
Breaks: dnsmasq (<< 2.59-4ubuntu0)
Conffiles:
 /etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.
Original-Maintainer: Simon Kelley <simon@thekelleys.org.uk>

Package: libgupnp-igd-1.0-4
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gupnp-igd
Version: 0.2.1-2
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.31.2), libgssdp-1.0-3 (>= 0.12.0), libgupnp-1.0-4 (>= 0.18.0)
Pre-Depends: multiarch-support
Description: library to handle UPnP IGD port mapping
 A GObject-based API for controling UPnP Internet Gateway Devices
 port mapping.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: http://www.gupnp.org/

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 265
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.06.95-2ubuntu1
Depends: libc6 (>= 2.14), libreadline6 (>= 6.0), dpkg (>= 1.15.4) | install-info
Description: The GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.
 Home page: http://directory.fsf.org/GNU/bc.html
Original-Maintainer: John G. Hasler <jhasler@debian.org>

Package: python-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1527
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: configobj
Version: 4.7.2+ds-3build1
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8)
Description: simple but powerful config file reader and writer for Python
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
Original-Maintainer: Daniel Watkins <daniel@daniel-watkins.co.uk>
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: xfce4-power-manager
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 383
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 1.2.0-1ubuntu1.1~ppa1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libgtk2.0-0 (>= 2.24.0), libnotify4 (>= 0.7.0), libx11-6, libxext6, libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), libxrandr2 (>= 2:1.2.99.2), upower, xfce4-power-manager-data (= 1.2.0-1ubuntu1.1~ppa1)
Recommends: consolekit
Suggests: xfce4-power-manager-plugins, udisks
Conffiles:
 /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml 9f465ee63d6b5a684de8cd420d35c392
 /etc/xdg/autostart/xfce4-power-manager.desktop aa25b63ce74920f4689d9d9a7d49ba61
Description: power manager for Xfce desktop
 This power manager for the Xfce desktop enables laptop users to set up
 a power profile for two different modes "on battery power" and "on ac
 power" while still allowing desktop users to at least change the DPMS
 settings and CPU frequency using the settings dialogue..
 .
 It features:
   * battery monitoring
   * cpu frequency settings
   * monitor DPMS settings
   * suspend/Hibernate
   * LCD brightness control
   * Lid, sleep and power switches control
Homepage: http://goodies.xfce.org/projects/applications/xfce4-power-manager
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: glib-networking
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.32.1-1ubuntu2
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.31.8), libgnutls26 (>= 2.12.6.1-0), libp11-kit0 (>= 0.11), libproxy1 (>= 0.4.7), glib-networking-services (>= 2.32.1-1ubuntu2), glib-networking-services (<< 2.32.1-1ubuntu2.1~), glib-networking-common (= 2.32.1-1ubuntu2), gsettings-desktop-schemas
Breaks: libglib2.0-0 (<< 2.30.1-2)
Description: network-related giomodules for GLib
 This package contains various network related extensions for the GIO
 library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libdirac-encoder0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 588
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dirac
Version: 1.0.2-4build1
Replaces: libdirac0, libdirac0c2a
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Conflicts: libdirac0, libdirac0c2a
Description: open and royalty free high quality codec - encoder library
 Dirac is an advanced royalty-free video compression format designed for a wide
 range of uses, from delivering low-resolution web content to broadcasting HD
 and beyond, to near-lossless studio editing.
 .
 This package contains the dirac encoder library.
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Homepage: http://diracvideo.org/

Package: gnumeric-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 8737
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnumeric
Version: 1.10.17-1ubuntu2
Replaces: docbook-xsl, gnumeric (<< 1.1.17-2), gnumeric1.0-doc
Recommends: yelp (>= 2.6.0), gnome-desktop-data
Suggests: gnumeric (>= 1.10.17), docbook-xsl
Breaks: gnumeric1.0-doc
Description: spreadsheet application for GNOME - documentation
 Gnumeric is a spreadsheet application that interoperates well
 with other spreadsheets. It comes with plugins that enable it to deal with
 commonly used spreadsheet file formats.
 .
 This package provides the user manual in GNOME Help
 (DocBook XML) format.
Homepage: http://www.gnumeric.org/
Original-Maintainer: J.H.M. Dassen (Ray) <jdassen@debian.org>

Package: shimmer-themes
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 769
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: all
Version: 1.3.0-0ubuntu1
Replaces: murrines-themes (<= 0.98.3), xubuntu-artwork (<= 11.10.0)
Depends: gtk2-engines-murrine (>= 0.98), gtk3-engines-unico (>= 1.0.1)
Suggests: xfwm4 | metacity, xfce4-notifyd, shimmer-wallpapers
Breaks: murrines-themes (<= 0.98.3), xubuntu-artwork (<= 11.10.0)
Description: Gtk+ themes from Shimmer Project
 This package contains all the desktop suites by Shimmer Project.
 .
  * Albatross, a dark and light theme that was originally designed for
    Xubuntu 9.10. Albatross is designed to be smooth: no rough borders,
    no contrasted edges, no violent contrasts, a soft blue colour.
  * Bluebird is the colorful successor to Albatross originally designed
    for Xubuntu 10.10. Bluebird is the only way to go if you love blue!
  * Greybird is the more conservative but at the same time modern variant
    of Bluebird. Greybird contains a lot of improvements over Bluebird;
    amongst other things, full GTK3 support.
Homepage: http://shimmerproject.org/

Package: libboost-iostreams1.46.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.46
Version: 1.46.1-7ubuntu3
Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4)
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/
Original-Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>

Package: filezilla
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 3175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.5.3-1ubuntu2
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.1.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libgnutls26 (>= 2.12.6.1-0), libidn11 (>= 1.13), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.6), libtinyxml2.6.2, libwxbase2.8-0 (>= 2.8.12.1), libwxgtk2.8-0 (>= 2.8.12.1), filezilla-common (= 3.5.3-1ubuntu2)
Recommends: xdg-utils
Description: Full-featured graphical FTP/FTPS/SFTP client
 FileZilla is a full-featured FTP client with an easy-to-use GUI.
 .
 It is written in C++ and uses the wxWidgets library.
 .
 FileZilla includes the following features:
   * Supports FTP, FTP over SSL/TLS (FTPS) and SSH File Transfer Protocol (SFTP)
   * IPv6 support
   * Available in more than 40 languages
   * Supports resume and transfer of large files >4GB
   * Easy to use Site Manager and transfer queue
   * Bookmarks
   * Drag & drop support
   * Speed limits
   * Filename filters
   * Directory comparison
   * Network configuration wizard
   * Remote file editing
   * Keep-alive
   * HTTP/1.1, SOCKS5 and FTP Proxy support
   * Logging to file
   * Synchronized directory browsing
   * Remote file search
   * Tabbed interface to connect to multiple servers
Homepage: http://filezilla-project.org/
Original-Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>

Package: syslinux-legacy
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 127
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:3.63+dfsg-2ubuntu5
Depends: libc6 (>= 2.4)
Recommends: mtools
Description: Bootloader for Linux/i386 using MS-DOS floppies
 SYSLINUX is a boot loader for the Linux/i386 operating system which operates
 off an MS-DOS/Windows FAT filesystem. It is intended to simplify first-time
 installation of Linux, and for creation of rescue and other special-purpose
 boot disks.
 .
 It can also be used as a PXE bootloader during network boots.
 .
 SYSLINUX is probably not suitable as a general purpose boot loader. However,
 SYSLINUX has shown itself to be quite useful in a number of special-purpose
 applications.
Homepage: http://syslinux.zytor.com/
Original-Maintainer: Daniel Baumann <daniel@debian.org>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.47ubuntu1
Depends: lsb-base (>= 3.0-6), initscripts, upstart-job
Recommends: ifupdown
Conflicts: inetutils-inetd (<< 2:1.4.3+20060719-3), openbsd-inetd (<< 0.20050402-3)
Conffiles:
 /etc/protocols 2e1e463038cc62e7110e33e21552751f
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services f8ab505348ca029cdba1929d2c59d23d
 /etc/init.d/networking f5a562ab343f7e58dd7cb21636429332
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 2384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: file
Version: 5.09-2ubuntu0.4
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: File type determination library using "magic" numbers
 This library can be used to classify files according to magic number tests. It
 implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>

Package: libdrm2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdrm
Version: 2.4.52-1~precise1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libdrm2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libgcr-3-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: gnome-keyring
Version: 3.2.2-2ubuntu4.1
Replaces: libgcr-3-1 (<< 3.2.2-1)
Breaks: libgcr-3-1 (<< 3.2.2-1)
Description: Library for Crypto UI related task - common files
 GCR is a library for crypto UI and related tasks.
 .
 This package contains data files uses by the GCR library.
Homepage: http://live.gnome.org/GnomeKeyring
Original-Maintainer: Josselin Mouette <joss@debian.org>

Package: libdrm-nouveau1a
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libdrm
Version: 2.4.52-1~precise1
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.3)
Pre-Depends: multiarch-support
Conflicts: libdrm-nouveau1
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the nouveau-specific kernel
 DRM services. DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libdrm-nouveau1a
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: libdrm
Version: 2.4.52-1~precise1
Depends: libc6 (>= 2.1.3), libdrm2 (>= 2.4.3)
Pre-Depends: multiarch-support
Conflicts: libdrm-nouveau1
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the nouveau-specific kernel
 DRM services. DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libmspub-0.1-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 517
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: amd64
Source: libmspub
Version: 0.1.1-1~precise1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libicu48 (>= 4.8-1), librevenge-0.0-0, libstdc++6 (>= 4.6), zlib1g (>= 1:1.1.4)
Description: library for parsing the mspub file structure
 Libmspub is library providing ability to interpret and import mspub
 diagrams into various applications.
Homepage: http://www.freedesktop.org/wiki/Software/libmspub

Package: libtotem-plparser17
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: totem-pl-parser
Version: 3.4.1-1
Replaces: libtotem-plparser10, libtotem-plparser12
Depends: libarchive12, libc6 (>= 2.8), libglib2.0-0 (>= 2.31.8), libgmime-2.6-0 (>= 2.6.4), libquvi7 (>= 0.4.0), libsoup-gnome2.4-1 (>= 2.27.4), libsoup2.4-1 (>= 2.30.0), libxml2 (>= 2.7.4)
Description: Totem Playlist Parser library - runtime files
 totem-pl-parser is a simple GObject-based library to parse a host of
 playlist formats, as well as save those.
 .
 This package contains the shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: newt
Version: 0.52.11-2ubuntu10
Replaces: newt0.10, newt0.21 (<< 0.21-4), whiptail-utf8
Provides: whiptail-provider, whiptail-utf8
Depends: libc6 (>= 2.14), libnewt0.52 (>= 0.52.11), libpopt0 (>= 1.14), libslang2 (>= 2.0.7-1)
Conflicts: whiptail-provider
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://fedorahosted.org/newt/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libgsm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgsm
Version: 1.0.13-3
Depends: libc6 (>= 2.3.4)
Conflicts: libgsm-dev
Description: Shared libraries for GSM speech compressor
 This package contains runtime shared libraries for libgsm, an
 implementation of the European GSM 06.10 provisional standard for
 full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP
 (residual pulse excitation/long term prediction) coding at 13 kbit/s.
 .
 GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
 rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
 with typical UNIX applications, our implementation turns frames of 160
 16-bit linear samples into 33-byte frames (1650 Bytes/s).
 The quality of the algorithm is good enough for reliable speaker
 recognition; even music often survives transcoding in recognizable
 form (given the bandwidth limitations of 8 kHz sampling rate).
 .
 The interfaces offered are a front end modelled after compress(1), and
 a library API.  Compression and decompression run faster than realtime
 on most SPARCstations.  The implementation has been verified against the
 ETSI standard test patterns.
Original-Maintainer: Jochen Friedrich <jochen@scram.de>

Package: xserver-xorg-video-openchrome
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 527
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:0.2.904+svn1050-1ubuntu0.1
Provides: xorg-driver-video
Depends: libc6 (>= 2.14), libdrm2 (>= 2.3.1), libx11-6 (>= 2:1.4.99.1), libxext6, libxv1, libxvmc1, xorg-video-abi-11, xserver-xorg-core (>= 2:1.10.99.901)
Description: X.Org X server -- VIA display driver
 OpenChrome is a project for the development of free and open-source drivers
 for the VIA UniChrome video chipsets.
 .
 Originally called the 'snapshot' release, since it was a snapshot of an
 experimental branch of the unichrome cvs code, this is a continued development
 of the open source unichrome driver (from http://unichrome.sf.net) which
 also incorporates support for the unichrome-pro chipsets.
 .
 Support for hardware acceleration (XvMC) for all chipsets has subsequently
 been ripped out of the unichrome.sf.net driver. Therefore your only option if
 you wish to make use of the acceleration features of your VIA chip with free
 and open-source drivers is to use this version of the driver.
Homepage: http://www.openchrome.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: cups-client
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 535
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cups
Version: 1.5.3-0ubuntu8.4
Depends: libc6 (>= 2.14), libcups2 (>= 1.5.0), libcupsimage2 (>= 1.4.0), cups-common (>= 1.5.3), adduser
Recommends: smbclient
Suggests: cups, xpp, cups-bsd
Conflicts: lprng
Description: Common UNIX Printing System(tm) - client programs (SysV)
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the System V style print client programs.
Homepage: http://www.cups.org
Original-Maintainer: Debian CUPS Maintainers <pkg-cups-devel@lists.alioth.debian.org>

Package: thunar
Status: install ok installed
Priority: optional
Section: xfce
Installed-Size: 891
Maintainer: Xubuntu Developers <xubuntu-devel@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.3-0ubuntu1~ppa0.12.04.1
Replaces: thunar-data (<< 1.2.3-3)
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.4), libcairo2 (>= 1.6.0), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libexo-1-0 (>= 0.9.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgtk2.0-0 (>= 2.24.0), libgudev-1.0-0 (>= 147), libice6 (>= 1:1.0.0), libnotify4 (>= 0.7.0), libpango1.0-0 (>= 1.14.0), libsm6, libthunarx-2-0 (>= 1.1.0), libxfce4ui-1-0 (>= 4.9.0), libxfce4util6 (>= 4.9.0), libxfconf-0-2 (>= 4.6.0), thunar-data (= 1.6.3-0ubuntu1~ppa0.12.04.1), desktop-file-utils, shared-mime-info, exo-utils
Recommends: dbus-x11, xfce4-panel (>= 4.9.2), thunar-volman, tumbler, xdg-user-dirs, gvfs
Suggests: thunar-archive-plugin, thunar-media-tags-plugin
Breaks: thunar-data (<< 1.2.3-3)
Description: File Manager for Xfce
 Thunar is the file manager designed to be the default file manager of Xfce 4.6
 It has been designed to be fast and easy to use.
 .
 An Xfce plugin can manages the trash, if xfce4-panel is installed as well.
 Please read README.Debian for volume management stuff.
Homepage: http://thunar.xfce.org
Original-Maintainer: Debian Xfce Maintainers <pkg-xfce-devel@lists.alioth.debian.org>

Package: ntfs-3g
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2012.1.15AR.1-1ubuntu1.2
Replaces: libntfs-3g75, ntfsprogs
Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.14), libfuse2 (>= 2.8.1), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.6.1-0), initramfs-tools (>= 0.99), initscripts (>= 2.88dsf-13.3)
Pre-Depends: multiarch-support, fuse
Conflicts: libntfs-3g75, ntfsprogs (<< 1:2011.10.9AR.1-3~)
Description: read/write NTFS driver for FUSE
 NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
 filesystem used by Microsoft Windows. It can:
 .
  * create, remove, rename, or move files, directories, hard links, and streams;
  * read and write files, including streams, sparse files, and transparently
    compressed files;
  * handle special files like symbolic links, devices, and FIFOs;
  * provide standard management of file ownership and permissions, including
    POSIX ACLs.
 .
 This package also contains the tools previously available in the ntfsprogs
 package.
Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>

Package: libpulse-mainloop-glib0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: sound
Installed-Size: 117
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pulseaudio
Version: 1:1.1-0ubuntu15.4
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.16.0), libpulse0 (>= 1:1.1-0ubuntu15.4)
Pre-Depends: multiarch-support
Description: PulseAudio client libraries (glib support)
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.
Homepage: http://www.pulseaudio.org
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>

Package: libwpd-0.9-9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 999
Maintainer: Rene Engelhard <rene@debian.org>
Architecture: amd64
Source: libwpd
Version: 0.9.9-1~precise1
Replaces: libwpd0, libwpd2, libwpd3, libwpd4, libwpd5, libwpd6, libwpd8
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.1.4)
Conflicts: libwpd0, libwpd2, libwpd3, libwpd4, libwpd5, libwpd6, libwpd8
Description: Library for handling WordPerfect documents (shared library)
 libwpd is a library for reading and writing WordPerfect(TM) documents.
 Importing from WordPerfect 4/5/6/7/8/9/10/11 and WordPerfect for Macintosh
 1.x/2.x/3.5e files are supported.  libwpd has complete support for the
 entire set of WordPerfect extended characters, too.
 .
 This package contains the shared library.

Package: libwebkitgtk-3.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 23350
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: webkit
Version: 1.8.3-0ubuntu0.12.04.1
Depends: libjavascriptcoregtk-3.0-0 (= 1.8.3-0ubuntu0.12.04.1), libatk1.0-0 (>= 1.12.4), libc6 (>= 2.14), libcairo2 (>= 1.10.0), libenchant1c2a (>= 1.6), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libgail-3-0 (>= 3.0.0), libgdk-pixbuf2.0-0 (>= 2.22.0), libgeoclue0 (>= 0.11.1), libglib2.0-0 (>= 2.31.8), libgstreamer-plugins-base0.10-0 (>= 0.10.31), libgstreamer0.10-0 (>= 0.10.31), libgtk-3-0 (>= 3.3.6), libicu48 (>= 4.8-1), libjpeg8 (>= 8c), libpango1.0-0 (>= 1.22.0), libpng12-0 (>= 1.2.13-4), libsoup2.4-1 (>= 2.37.92), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 4.1.1), libx11-6, libxml2 (>= 2.7.4), libxrender1, libxslt1.1 (>= 1.1.25), libxt6, zlib1g (>= 1:1.1.4), libwebkitgtk-3.0-common (>= 1.8.3)
Description: Web content engine library for GTK+
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
 .
 This is the library for embedding in GTK+ applications.
Homepage: http://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: libaspell15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2311
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: aspell
Version: 0.60.7~20110707-1
Depends: libc6 (>= 2.4), libstdc++6 (>= 4.6)
Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary
Suggests: aspell
Breaks: aspell-bin (<< 0.60.3-2)
Conflicts: aspell6-dictionary
Description: GNU Aspell spell-checker runtime library
 These are the runtime parts of the Aspell and pspell spell-checking
 toolkits, needed by applications that use the toolkits at runtime.
 .
 For a standalone spell-checker, install aspell as well.
Original-Maintainer: Brian Nelson <pyro@debian.org>
Homepage: http://aspell.net/

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 153
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.11-4ubuntu0.1
Depends: libc6 (>= 2.4)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: http://dmidecode.nongnu.org/
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>

Package: libgtkmm-2.4-1c2a
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 4928
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gtkmm2.4
Version: 1:2.24.2-1ubuntu1
Replaces: libgtkmm-2.4-1, libgtkmm-2.4-1c2
Depends: libatkmm-1.6-1 (>= 2.22.1), libc6 (>= 2.4), libcairomm-1.0-1 (>= 1.6.4), libgcc1 (>= 1:4.1.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.24.0), libglibmm-2.4-1c2a (>= 2.30.0), libgtk2.0-0 (>= 2.24.0), libpangomm-1.4-1 (>= 2.27.1), libsigc++-2.0-0c2a (>= 2.0.2), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Conflicts: libgtkmm-2.4-1, libgtkmm-2.4-1c2
Description: C++ wrappers for GTK+ (shared libraries)
 Gtkmm is a C++ interface for the popular GUI library GTK+, with API version
 2.4.  Gtkmm provides a convenient interface for C++ programmers to create
 graphical user interfaces with GTK+'s flexible OO framework. Highlights
 include type safe callbacks, widgets extensible using inheritance and over 180
 classes that can be freely combined to quickly create complex user interfaces.
 .
 This package contains shared libraries.
Homepage: http://www.gtkmm.org/
Original-Maintainer: Deng Xiyue <manphiz-guest@users.alioth.debian.org>

Package: apt-transport-https
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 173
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apt
Version: 0.8.16~exp12ubuntu10.17
Depends: libapt-pkg4.12 (>= 0.8.16~exp12ubuntu10.17), libc6 (>= 2.14), libcurl3-gnutls (>= 7.22.0-3ubuntu4.3), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Description: https download transport for APT
 This package enables the usage of 'deb https://foo distro main' lines
 in the /etc/apt/sources.list so that all package managers using the
 libapt-pkg library can access metadata and packages available in sources
 accessible over https (Hypertext Transfer Protocol Secure).
 .
 This transport supports server as well as client authentication
 with certificates.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: calibre-bin
Status: install ok installed
Priority: extra
Section: text
Installed-Size: 589
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: calibre
Version: 0.8.38+dfsg-1
Depends: libc6 (>= 2.14), libchm1 (>= 0.40), libfontconfig1 (>= 2.8.0), libgcc1 (>= 1:4.1.1), libicu48 (>= 4.8-1), libmagickwand4 (>= 8:6.6.9.7), libpng12-0 (>= 1.2.13-4), libpodofo0.9.0, libpoppler19, libpython2.7 (>= 2.7), libqtcore4 (>= 4:4.8.0), libqtgui4 (>= 4:4.5.3), libstdc++6 (>= 4.4.0), sip-api-8.1, python2.7
Recommends: calibre (>= 0.8.38+dfsg-1)
Description: e-book converter and library management
 Calibre is meant to be a complete e-library solution. It includes library
 management, format conversion, news feeds to e-book conversion as well as
 e-book reader sync features.
 .
 Calibre is primarily an e-book cataloging program. It manages your e-book
 collection for you. It is designed around the concept of the logical book,
 i.e. a single entry in the database that may correspond to e-books in several
 formats. It also upports conversion from a dozen different e-book formats to
 LRF and EPUB. A graphical interface to the conversion software can be
 accessed easily by just clicking the "Convert E-books" button.
 .
 Supported input formats are: MOBI, LIT, PRC, EPUB, ODT, HTML, CBR, CBZ, RTF,
 TXT, PDF and LRS.
 .
 Calibre has a modular device driver design that makes adding support for
 different e-reader devices easy. At the moment, it has support for the
 SONY PRS 500/505/700 and the iPhone (with the stanza reader software).
 Syncing supports updating metadata on the device from metadata in the library
 and the creation of collections on the device based on the tags defined in
 the library view. If an book has more than one format available, calibre
 automatically chooses the best format when uploading to the device.
 .
 Calibre can automatically fetch news from a number of websites/RSS feeds,
 format the news into a e-book and upload to a connected device. There is
 support for generating LRF/EPUB e-books. The e-books include the *full*
 versions of the articles, not just the summaries.
 .
 Calibre has also a built-in e-book viewer that can display all the major e-book
 formats.
 .
 This package contains the compiled architecture dependent plugins.
Original-Maintainer: Miriam Ruiz <little_miry@yahoo.es>
Homepage: http://calibre-ebook.com

Package: libpam-modules
Status: install ok installed
Multi-Arch: same
Priority: required
Section: admin
Installed-Size: 773
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.14), libdb5.1, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.0.85), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.3-7ubuntu2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf cbacdff4aa5f51749f191b32754946cb
 /etc/security/namespace.conf c600fa5899cfb3198a01dfba2bf281f3
 /etc/security/namespace.init 114e73ed5f40956527286e6213d305bc
 /etc/security/pam_env.conf ed3f430e418ad366ddb23307a8755249
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf c23fcbb29dda6c1499e6a5e5ade0265e
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: xserver-xorg-video-vmware
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 236
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: amd64
Version: 1:12.0.1-1ubuntu1.1
Provides: xorg-driver-video
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.17), libx11-6 (>= 2:1.4.99.1), libxatracker1, libxext6, xorg-video-abi-11, xserver-xorg-core (>= 2:1.10.99.901)
Conffiles:
 /etc/modprobe.d/vmwgfx-fbdev.conf e45879da214313bf5e43c6c4dd4b77ab
Description: X.Org X server -- VMware display driver
 This package provides the driver for VMware client sessions, i.e. if Linux
 is running inside a VMware session.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This package is built from the X.org xf86-video-vmware driver module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: tzdata
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 1664
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2014e-0ubuntu0.12.04
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-wheezy
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: avahi-autoipd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: avahi
Version: 0.6.30-5ubuntu2.1
Depends: libc6 (>= 2.14), libdaemon0 (>= 0.10), adduser
Recommends: isc-dhcp-client, iproute
Conflicts: zeroconf
Conffiles:
 /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd 2a5be4d37a91789eb96df082adcbcc83
 /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd be96f910115ec349e527bd7165ec2250
 /etc/avahi/avahi-autoipd.action 883986521495563bcbc34a4e3f8a5512
 /etc/network/if-up.d/avahi-autoipd b55c04be44d114919e1d9ae6b7c5e8d1
 /etc/network/if-down.d/avahi-autoipd b4db602401adc4b8019f6a0ba1a599f8
Description: Avahi IPv4LL network address configuration daemon
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This tool implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local
 Addresses" (IETF RFC3927), a protocol for automatic IP address
 configuration from the link-local 169.254.0.0/16 range without the
 need for a central server. It is primarily intended to be used in
 ad-hoc networks which lack a DHCP server.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libavahi-glib1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: avahi
Version: 0.6.30-5ubuntu2.1
Depends: libavahi-common3 (>= 0.6.16), libc6 (>= 2.2.5), libglib2.0-0 (>= 2.16.0)
Pre-Depends: multiarch-support
Description: Avahi glib integration library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This library contains the interface to integrate the Avahi libraries
 into a GLIB main loop application, including GTK+ applications.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libudev0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: udev
Version: 175-0ubuntu9.5
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: udev library
 libudev provides a set of functions for accessing the udev database
 and querying sysfs.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: python
Status: install ok installed
Multi-Arch: allowed
Priority: important
Section: python
Installed-Size: 658
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-defaults
Version: 2.7.3-0ubuntu2.2
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.3), python-minimal (= 2.7.3-0ubuntu2.2)
Suggests: python-doc (= 2.7.3-0ubuntu2.2), python-tk (= 2.7.3-0ubuntu2.2)
Breaks: python-bz2 (<< 1.1-8), python-csv (<< 1.0-4), python-email (<< 2.5.5-3), update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Homepage: http://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: gir1.2-dee-1.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dee
Version: 1.0.10-0ubuntu1.1
Replaces: gir1.2-dee-0.5
Depends: gir1.2-glib-2.0, libdee-1.0-4 (>= 1.0.6)
Description: GObject introspection data for the Dee library
 This package contains introspection data for the Dee library.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Homepage: https://launchpad.net/dee
Original-Maintainer: Kartik Mistry <kartik@debian.org>

Package: obex-data-server
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.4.6-0ubuntu1
Depends: libbluetooth3 (>= 4.66), libc6 (>= 2.7), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.88), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.16.0), libopenobex1, libusb-0.1-4 (>= 2:0.1.12)
Recommends: python, python-dbus, python-gobject
Conffiles:
 /etc/obex-data-server/imaging_capabilities.xml 0a887ca2727603bdc4c97f0e16b63333
 /etc/obex-data-server/capability.xml 3d427ce2283eb582158048896ec3cfcb
Description: D-Bus service for OBEX client and server side functionality
 obex-data-server is a D-Bus service providing high-level OBEX client and
 server side functionality (currently supports OPP and FTP profiles and
 Bluetooth transport).
Homepage: http://wiki.muiline.com/obex-data-server
Original-Maintainer: Filippo Giunchedi <filippo@debian.org>

Package: python-apport
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 477
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.0.1-0ubuntu17.7
Depends: python2.7, python (>= 2.7.1-0ubuntu2), python (<< 2.8), python-apt (>= 0.7.9), python-problem-report (>= 0.94), python-launchpadlib (>= 1.5.7), lsb-release
Conffiles:
 /etc/apport/crashdb.conf e9e01c48f40cf4c76a95c4af1fc88229
 /etc/apport/crashdb.conf.d/cloud-archive.conf 6ada5e46870346e8e2394a8d0c82ee5d
Description: apport crash report handling library
 This Python package provides high-level functions for creating and
 handling apport crash reports:
 .
  * Query available and new reports.
  * Add OS, packaging, and process runtime information to a report.
  * Various frontend utility functions.
  * Python hook to generate crash reports when Python scripts fail.
Homepage: https://wiki.ubuntu.com/Apport

Package: rhythmbox-plugins
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: rhythmbox
Version: 2.96-0ubuntu4.3
Replaces: rhythmbox (<< 2.90.1~git20120108.9a9e21b9-0ubuntu1)
Depends: libc6 (>= 2.4), libdmapsharing-3.0-2 (>= 2.9.12), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.31.8), libgnome-keyring0 (>= 2.20.3), libgpod4 (>= 0.7.92), libgstreamer0.10-0 (>= 0.10.32), libgtk-3-0 (>= 3.0.0), libgudev-1.0-0 (>= 147), libjson-glib-1.0-0 (>= 0.12.0), liblircclient0, libmtp9 (>= 1.1.0), libnotify4 (>= 0.7.0), libpango1.0-0 (>= 1.14.0), libpeas-1.0-0 (>= 1.0.0), librhythmbox-core5 (= 2.96-0ubuntu4.3), libsoup-gnome2.4-1 (>= 2.27.4), libsoup2.4-1 (>= 2.26.0), libtotem-plparser17 (>= 2.32.1), python (>= 2.7.1-0ubuntu2), python2.7, rhythmbox (= 2.96-0ubuntu4.3), gir1.2-rb-3.0 (= 2.96-0ubuntu4.3), gir1.2-glib-2.0, gir1.2-gtk-3.0, gir1.2-webkit-3.0, gir1.2-peas-1.0
Recommends: nautilus-sendto, python-mako
Breaks: rhythmbox (<< 0.12.6-4)
Description: plugins for rhythmbox music player
 Rhythmbox is a very easy to use music playing and management program
 which supports a wide range of audio formats (including mp3 and ogg).
 Originally inspired by Apple's iTunes, the current version also supports
 Internet Radio, iPod integration and generic portable audio player
 support, Audio CD burning, Audio CD playback, music sharing, and
 Podcasts.
 .
 This package contains the following plugins:
  - Cover art
  - Last.fm
  - Context Panel
  - DAAP Music Sharing
  - FM Radio
  - Portable Players
  - IM Status
  - Portable Players - iPod
  - Song Lyrics
  - Portable Players - MTP
  - Python Console
  - LIRC
  - Nautilus Send-to
  - Replay Gain
  - MediaServer2 D-Bus
  - MPRIS D-Bus
Homepage: http://projects.gnome.org/rhythmbox/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: indicator-status-provider-pidgin
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: indicator-messages
Version: 0.6.0-0ubuntu2
Depends: libc6 (>= 2.2.5), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.16.0), libindicator-messages-status-provider1 (>= 0.4.92), indicator-messages (>= 0.4.92)
Description: indicator-messages status provider for pidgin
 A status provider for indicator-messages to update your desktop presence
 from pidgin.
Homepage: https://launchpad.net/indicator-messages
Original-Maintainer: The Ayatana Packagers <pkg-ayatana-devel@lists.alioth.debian.org>

Package: libfontconfig1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 425
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: fontconfig
Version: 2.8.0-3ubuntu9.1
Provides: libfontconfig
Depends: libc6 (>= 2.14), libexpat1 (>= 1.95.8), libfreetype6 (>= 2.2.1), fontconfig-config (= 2.8.0-3ubuntu9.1)
Pre-Depends: multiarch-support
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Original-Maintainer: Keith Packard <keithp@debian.org>

Package: libfontconfig1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 416
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: i386
Source: fontconfig
Version: 2.8.0-3ubuntu9.1
Provides: libfontconfig
Depends: libc6 (>= 2.7), libexpat1 (>= 1.95.8), libfreetype6 (>= 2.2.1), fontconfig-config (= 2.8.0-3ubuntu9.1)
Pre-Depends: multiarch-support
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Original-Maintainer: Keith Packard <keithp@debian.org>

Package: xserver-xorg-input-wacom
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 287
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: amd64
Source: xf86-input-wacom
Version: 1:0.14.0-0ubuntu2.1
Replaces: wacom-tools (<< 0.10.0)
Provides: xorg-driver-input
Depends: xorg-input-abi-16, xserver-xorg-core (>= 2:1.10.99.901), libc6 (>= 2.4), libx11-6, libxi6 (>= 2:1.2.0), libxinerama1, libxrandr2 (>= 2:1.2.0)
Suggests: xinput
Conflicts: wacom-tools (<< 0.10.0)
Description: X.Org X server -- Wacom input driver
 This package provides the X.Org driver for Wacom tablet devices.
Homepage: http://linuxwacom.sf.net
Original-Maintainer: Ron Lee <ron@debian.org>

Package: gstreamer0.10-gnomevfs
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gst-plugins-base0.10
Version: 0.10.36-1ubuntu0.1
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.31.8), libgnomevfs2-0 (>= 1:2.17.90), libgstreamer0.10-0 (>= 0.10.36)
Recommends: libgnomevfs2-extra
Description: GStreamer plugin for GnomeVFS
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GStreamer plugin to read from and write to
 GnomeVFS URIs.  GnomeVFS is the GNOME virtual file-system.
Homepage: http://gstreamer.freedesktop.org
Gstreamer-Elements: gnomevfssink, gnomevfssrc
Gstreamer-Uri-Sinks: file, sftp, ssh
Gstreamer-Uri-Sources: file, sftp, ssh
Gstreamer-Version: 0.10
Original-Maintainer: Maintainers of GStreamer packages <pkg-gstreamer-maintainers@lists.alioth.debian.org>

Package: ifupdown
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 186
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.7~beta2ubuntu11.1
Replaces: netbase (<< 4.00)
Depends: iproute (>= 20071016-1), libc6 (>= 2.14), upstart-job, lsb-base, initscripts (>= 2.88dsf-13.3)
Suggests: isc-dhcp-client | dhcp-client, ppp, rdnssd, net-tools
Conflicts: dhcp-client (<< 3.0)
Conffiles:
 /etc/network/if-up.d/upstart 2869783d5379a5acfaff5da1fc428718
 /etc/network/if-down.d/upstart be2d7ca79c30064a88777f8c6c1d19fe
 /etc/init/network-interface-container.conf 7fb0862f8c092b33c16ec0f05387fbfb
 /etc/init/network-interface-security.conf 8d6447a035b681f5fa22d168adcf8dec
 /etc/init/networking.conf d3dc878505e8997b131bad117ad266d5
 /etc/init/network-interface.conf 46f83d98d2a95a8ad03fab33529b82e8
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.
Original-Maintainer: Andrew O. Shadura <bugzilla@tut.by>

Package: syslinux-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 3148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: syslinux
Version: 2:4.05+dfsg-2
Replaces: syslinux
Recommends: libcrypt-passwdmd5-perl, libdigest-sha-perl
Breaks: syslinux (<< 2:4.05+dfsg-2)
Description: collection of boot loaders (common files)
 SYSLINUX is a collection of boot loaders which operates off Linux ext2/3/4 or
 btrfs filesystems, MS-DOS FAT filesystems, network servers using PXE firmware,
 or from CD-ROMs.
 .
 This package contains common files.
Original-Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Homepage: http://syslinux.zytor.com/

Package: grub-pc-bin
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 1896
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: grub2
Version: 1.99-21ubuntu3.16
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 1.99-21ubuntu3.16)
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 1.99-21ubuntu3.16)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS binaries)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub2.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.

vinaigrette · Le 01/09/2014, à 11:42

@nam, heu...meme en plusieurs morceaux, à moins d'en faire une vingtaine(?) pas possible, il n'y a pas d'autres moyens ?

Slystone · Le 01/09/2014, à 11:46

@ vinaigrette : ah ok, il y a encore du taf. Effectivement, t'as bien fait de ne pas continuer.
Je regarde plus tard.

nam1962 · Le 01/09/2014, à 12:17

vinaigrette a écrit :

@nam, heu...meme en plusieurs morceaux, à moins d'en faire une vingtaine(?) pas possible, il n'y a pas d'autres moyens ?

On va faire autrement : trouve tous les paragraphes décrivant du libreoffice (rechercher) et montre les nous (je dis bien les paragraphes : tu pigeras vite : status décrit les statuts des paquets, donc pas besoin des lignes qui citent libreoffice, mais bien des paragraphes.)

JLK · Le 01/09/2014, à 12:19

Il me semble que la dernière version de LibreOffice est encore la 4.3.1, et je ne suis pas certain qu'elle soit encore considérée comme stable par la communauté. Il me paraît plus prudent d'attendre la sortie de la 4.3.2 ou la 4.3.3.

nam1962 · Le 01/09/2014, à 12:25

Je tourne rond en 4.3.1.2.
Le seul souci date d'il y a une dizaine de jours quand les devs avaient oublié une ligne et que ca torpillait l'install de core et common.
Perso j'ai résolu sur toutes les installs touchées.
Les maj récentes passent sans soucis.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#51 Le 31/08/2014, à 22:57

Re : Problemme de mise à jour libreoffice [RESOLU]

#52 Le 31/08/2014, à 23:09

Re : Problemme de mise à jour libreoffice [RESOLU]

#53 Le 31/08/2014, à 23:25

Re : Problemme de mise à jour libreoffice [RESOLU]

#54 Le 31/08/2014, à 23:28

Re : Problemme de mise à jour libreoffice [RESOLU]

#55 Le 31/08/2014, à 23:29

Re : Problemme de mise à jour libreoffice [RESOLU]

#56 Le 31/08/2014, à 23:30

Re : Problemme de mise à jour libreoffice [RESOLU]

#57 Le 31/08/2014, à 23:33

Re : Problemme de mise à jour libreoffice [RESOLU]

#58 Le 31/08/2014, à 23:40

Re : Problemme de mise à jour libreoffice [RESOLU]

#59 Le 31/08/2014, à 23:48

Re : Problemme de mise à jour libreoffice [RESOLU]

#60 Le 31/08/2014, à 23:52

Re : Problemme de mise à jour libreoffice [RESOLU]

#61 Le 31/08/2014, à 23:52

Re : Problemme de mise à jour libreoffice [RESOLU]

#62 Le 31/08/2014, à 23:57

Re : Problemme de mise à jour libreoffice [RESOLU]

#63 Le 01/09/2014, à 00:08

Re : Problemme de mise à jour libreoffice [RESOLU]

#64 Le 01/09/2014, à 10:10

Re : Problemme de mise à jour libreoffice [RESOLU]

#65 Le 01/09/2014, à 10:40

Re : Problemme de mise à jour libreoffice [RESOLU]

#66 Le 01/09/2014, à 10:45

Re : Problemme de mise à jour libreoffice [RESOLU]

#67 Le 01/09/2014, à 11:10

Re : Problemme de mise à jour libreoffice [RESOLU]

#68 Le 01/09/2014, à 11:27

Re : Problemme de mise à jour libreoffice [RESOLU]

#69 Le 01/09/2014, à 11:36

Re : Problemme de mise à jour libreoffice [RESOLU]

#70 Le 01/09/2014, à 11:40

Re : Problemme de mise à jour libreoffice [RESOLU]

#71 Le 01/09/2014, à 11:42

Re : Problemme de mise à jour libreoffice [RESOLU]

#72 Le 01/09/2014, à 11:46

Re : Problemme de mise à jour libreoffice [RESOLU]

#73 Le 01/09/2014, à 12:17

Re : Problemme de mise à jour libreoffice [RESOLU]

#74 Le 01/09/2014, à 12:19

Re : Problemme de mise à jour libreoffice [RESOLU]

#75 Le 01/09/2014, à 12:25

Re : Problemme de mise à jour libreoffice [RESOLU]

Pied de page des forums