#1 Le 31/08/2014, à 17:17
- Adrien202
[Résolu] Problème boot DD après installation ubuntu 14.04
Bien le bonjour,
Pour commencer je tiens à préciser que je suis débutant!
Mon ordi ne bootait plus (windows 7), j'ai tout essayé pour le récupérer, le réinstaller, rien n'y a fait. J'ai donc essayé le live CD d'ubuntu, tout fonctionne correctement, j'ai pu récupérer certaines données mais mon disque dur me parait endommagé (problème de clusters). J'ai installé ubuntu dessus (à côté du windows endommagé), tout semble s'être bien passé. Le système me demande de rédémarrer, mais là il est incapable de booter.
J'ai donc essayé d'installer boot-repair avec les commandes:
sudo add-apt-repository ppa:yannubuntu/boot-repair
sudo sed 's/trusty/saucy/g' -i /etc/apt/sources.list.d/yannubuntu-boot-repair-trusty.list
sudo apt-get update
sudo apt-get install -y boot-repair && (boot-repair &)
Mais le terminal m'affiche:
E: impossible de trouver le paquet boot-repair
J'ai cherché un .deb du programme sur internet, sans succès...
Je cherche donc un moyen d'installer boot repair ou alors des conseils qui me permettront d'installer ubuntu sur le disque dur sans avoir à booter en live CD à chaque fois.
Merci d'avoir pris le temps de me lire et pour les suggestions que vous pourriez me faire.
A bientôt 
Dernière modification par Adrien202 (Le 02/09/2014, à 19:49)
Hors ligne
#2 Le 01/09/2014, à 06:11
- malbo
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Quand tu es en session liveDVD (ce n'est pas un CD, c'est un DVD), il faut que tu aies accès à internet : tu peux le vérifier en faisant un petit tour avec Firefox. Si tu n'as pas l'accès internet et que tu es en WiFi, connecte-toi en filaire le temps de faire les manips. Je donne ici une procédure simplifiée pour faire le Boot-Info : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Je te recommande de ne pas faire la "Réparation recommandée" de Boot-Repair mais seulement le Boot-Info.
Dernière modification par malbo (Le 01/09/2014, à 06:13)
Hors ligne
#3 Le 01/09/2014, à 09:34
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Le souci c'est que j'ai bien accès à internet. C'est de là que j'ai posté mon message sur le forum.
Malheureusement, j'ai fini par graver le CD hier soir et ai effectué la "Réparation recommandée" 
voici le lien du rapport: http://paste.ubuntu.com/8199945/
Une fois de plus, tout a l'air de s'être bien passé mais l'ordinateur ne boot toujours pas. Après avoir sélectionné l'OS ubuntu l'écran devient noir pendant un moment puis il fini par m'afficher quelque chose comme:
"System give up waiting----- (did the systeme wait long enough?)
-----( did the systeme wait for the right device?)"
Je posterai ce qui s'affiche exactement si c'est nécessaire.
Hors ligne
#4 Le 01/09/2014, à 10:09
- malbo
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 31Jan2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /BOOT/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 763,570,175 763,363,328 7 NTFS / exFAT / HPFS
/dev/sda3 763,572,222 1,903,894,527 1,140,322,306 f W95 Extended (LBA)
/dev/sda5 763,572,224 1,473,415,401 709,843,178 7 NTFS / exFAT / HPFS
/dev/sda6 1,473,417,216 1,891,491,839 418,074,624 83 Linux
/dev/sda7 1,891,493,888 1,903,894,527 12,400,640 82 Linux swap / Solaris
/dev/sda4 1,903,894,528 1,953,523,711 49,629,184 27 Hidden NTFS (Recovery Environment)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 3A1ED7081ED6BC57 ntfs SYSTEM
/dev/sda2 E09407079406DFC0 ntfs
/dev/sda4 32E4E454E4E41C3B ntfs SAMSUNG_REC
/dev/sda5 A04CB9144CB8E666 ntfs
/dev/sda6 80d5d393-8740-470b-8b35-40ef71f31ecf ext4
/dev/sda7 9c570c90-20e2-4afa-965c-100283a0d53d swap
/dev/sr0 iso9660 Boot-Repair-Disk 64bit
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-80d5d393-8740-470b-8b35-40ef71f31ecf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=80d5d393-8740-470b-8b35-40ef71f31ecf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-24-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-80d5d393-8740-470b-8b35-40ef71f31ecf' {
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-80d5d393-8740-470b-8b35-40ef71f31ecf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=80d5d393-8740-470b-8b35-40ef71f31ecf ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-80d5d393-8740-470b-8b35-40ef71f31ecf' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=80d5d393-8740-470b-8b35-40ef71f31ecf ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 80d5d393-8740-470b-8b35-40ef71f31ecf
else
search --no-floppy --fs-uuid --set=root 80d5d393-8740-470b-8b35-40ef71f31ecf
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-3A1ED7081ED6BC57' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3A1ED7081ED6BC57
else
search --no-floppy --fs-uuid --set=root 3A1ED7081ED6BC57
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=80d5d393-8740-470b-8b35-40ef71f31ecf / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=9c570c90-20e2-4afa-965c-100283a0d53d none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
796.711524963 = 855.462486016 boot/grub/grub.cfg 1
796.713855743 = 855.464988672 boot/grub/i386-pc/core.img 1
703.925304413 = 755.834040320 boot/vmlinuz-3.13.0-24-generic 2
703.925304413 = 755.834040320 vmlinuz 2
796.056640625 = 854.759309312 boot/initrd.img-3.13.0-24-generic 2
796.056640625 = 854.759309312 initrd.img 2
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ls: reading directory /mnt/BootInfo/sda4/: Input/output error
File descriptor 8 (/proc/2748/mounts) leaked on lvscan invocation. Parent PID 17982: bash
File descriptor 18 (/usr/share/icons/lubuntu/places/16/folder.svg) leaked on lvscan invocation. Parent PID 17982: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-31__21h30 ===================
boot-repair version : 3.198~ppa16~raring
boot-sav version : 3.198~ppa16~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.198~ppa16~raring
File descriptor 8 (/proc/2748/mounts) leaked on lvs invocation. Parent PID 4426: /bin/sh
File descriptor 18 (/usr/share/icons/lubuntu/places/16/folder.svg) leaked on lvs invocation. Parent PID 4426: /bin/sh
No volume groups found
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 24avr2013, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
Failed to mount '/dev/sda4': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda4 -> Error code 13
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda6:Ubuntu 14.04 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEM" UUID="3A1ED7081ED6BC57" TYPE="ntfs"
/dev/sda2: UUID="E09407079406DFC0" TYPE="ntfs"
/dev/sda4: LABEL="SAMSUNG_REC" UUID="32E4E454E4E41C3B" TYPE="ntfs"
/dev/sda5: UUID="A04CB9144CB8E666" TYPE="ntfs"
/dev/sda6: UUID="80d5d393-8740-470b-8b35-40ef71f31ecf" TYPE="ext4"
/dev/sda7: UUID="9c570c90-20e2-4afa-965c-100283a0d53d" TYPE="swap"
/dev/sr0: LABEL="Boot-Repair-Disk 64bit" TYPE="iso9660"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
Failed to mount '/dev/sda4': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda4 -> Error code 13
Windows not detected by os-prober on sda2.
Windows not detected by os-prober on sda5.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 17 01:26 grub.d
total 76
-rwxr-xr-x 1 root root 9424 avril 11 10:51 00_header
-rwxr-xr-x 1 root root 6058 avril 10 15:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 10:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 10:51 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 10:51 30_os-prober
-rwxr-xr-x 1 root root 1416 avril 11 10:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 11 10:51 40_custom
-rwxr-xr-x 1 root root 216 avril 11 10:51 41_custom
-rw-r--r-- 1 root root 483 avril 11 10:51 README
=================== sda6recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA SAMSUNG HN-M101M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 391GB 391GB primary ntfs
3 391GB 975GB 584GB extended lba
5 391GB 754GB 363GB logical ntfs
6 754GB 968GB 214GB logical ext4
7 968GB 975GB 6349MB logical linux-swap(v1)
4 975GB 1000GB 25.4GB primary ntfs diag
Error: /dev/sr0: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA SAMSUNG HN-M101M;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:391GB:391GB:ntfs::;
3:391GB:975GB:584GB:::lba;
5:391GB:754GB:363GB:ntfs::;
6:754GB:968GB:214GB:ext4::;
7:968GB:975GB:6349MB:linux-swap(v1)::;
4:975GB:1000GB:25.4GB:ntfs::diag;
Error: /dev/sr0: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/lubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 57 bc d6 1e 08 d7 1e 3a |........W......:|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff ff 7f 2d 00 00 00 00 |...........-....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 c0 df 06 94 07 07 94 e0 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 20 7b 71 |........?.... {q|
00000020 00 00 00 00 80 00 80 00 ff 47 f5 02 00 00 00 00 |.........G......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 3b 1c e4 e4 54 e4 e4 32 |........;...T..2|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 e0 58 4f 2a 00 00 00 00 |.........XO*....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 66 e6 b8 4c 14 b9 4c a0 |........f..L..L.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.9G 20M 2.9G 1% /
udev devtmpfs 2.9G 12K 2.9G 1% /dev
tmpfs tmpfs 589M 812K 588M 1% /run
/dev/sr0 iso9660 508M 508M 0 100% /cdrom
/dev/loop0 squashfs 435M 435M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.9G 8.0K 2.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.9G 0 2.9G 0% /run/shm
none tmpfs 100M 12K 100M 1% /run/user
/dev/sda1 fuseblk 100M 25M 76M 25% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 364G 87G 278G 24% /mnt/boot-sav/sda2
/dev/sda5 fuseblk 339G 212G 128G 63% /mnt/boot-sav/sda5
/dev/sda6 ext4 197G 3.8G 183G 2% /mnt/boot-sav/sda6
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x817d105e
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 763570175 381681664 7 HPFS/NTFS/exFAT
/dev/sda3 763572222 1903894527 570161153 f W95 Ext'd (LBA)
Partition 3 does not start on physical sector boundary.
/dev/sda4 1903894528 1953523711 24814592 27 Hidden NTFS WinRE
/dev/sda5 763572224 1473415401 354921589 7 HPFS/NTFS/exFAT
/dev/sda6 1473417216 1891491839 209037312 83 Linux
/dev/sda7 1891493888 1903894527 6200320 82 Linux swap / Solaris
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sda6 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s repair-filesystems fix-windows-boot
Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
ntfsfix /dev/sda1
Refusing to operate on read-write mounted device /dev/sda1.
ntfsfix /dev/sda2
Refusing to operate on read-write mounted device /dev/sda2.
ntfsfix /dev/sda4
Mounting volume... SET@_progressbar1.pulse()
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... SET@_progressbar1.pulse()
OK
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
Remount failed: Input/output error
ntfsfix /dev/sda5
Refusing to operate on read-write mounted device /dev/sda5.
fsck -fyM /dev/sda6
fsck from util-linux 2.20.1
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
Failed to mount '/dev/sda4': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda4 -> Error code 13
Quantity of real Windows: 2
grub-install : information : executing modprobe efivars 2>/dev/null.
grub-install : information : Looking for /sys/firmware/efi ...
grub-install : information : ... not found. Looking for /proc/device-tree ...
grub-install : information : ... not found.
Installing for i386-pc platform.
grub-install : erreur : le périphérique d'installation n'est pas indiqué.
,.
Reinstall the GRUB of sda6 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda6 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-24-generic
Found initrd image: /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
ls: reading directory /var/lib/os-prober/mount: Input/output error
Found Windows 7 (loader) on /dev/sda1
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read vcn 0x0: Input/output error
Failed to mount '/dev/sda4': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda4 -> Error code 13
Unhide GRUB boot menu in sda6/boot/grub/grub.cfg
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.Je ne sais pas trop ce qui se passe.
C'est quoi ton ordi (nom complet du modèle, fabricant) ?
Hors ligne
#5 Le 01/09/2014, à 10:25
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
C'est un samsung NP-RC530
Hors ligne
#6 Le 01/09/2014, à 16:01
- malbo
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Je ne vois pas dans le Boot-Info une anomalie qui puisse expliquer pourquoi tu n'arrives pas à booter sur ton Ubuntu installé. Désolé.
Hors ligne
#7 Le 01/09/2014, à 16:15
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Merci pour ton aide, je vais continuer à tâtonner, si je trouve une solution je viendrais la poster ici.
Sinon, si une autre âme charitable à un conseille à me donner, je suis preneur!
Hors ligne
#8 Le 01/09/2014, à 17:13
- moko138
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Adrien202 a écrit :
mon disque dur me parait endommagé (problème de clusters).
Si c'est exact, c'est une explication suffisante !
Si tu veux confirmation et détails, à partir de ton dvd, fais
sudo apt-get install smartmontoolspuis
sudo smartctl -a /dev/sdaet colle le retour complet ici.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 01/09/2014, à 21:00
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Finalement j'ai fini par opter pour une suppression pure et simple de windows. Et là, Ô miracle mon ordinateur arrive à booter! Je comptais réinstaller ubuntu sur une autre partition mais en fait ça n'a même pas été nécessaire.
Après je ne suis quand même pas convaincu que mon disque dur soit dans un état irréprochable donc je vais tenter de faire cette manip quand même.
Hors ligne
#10 Le 02/09/2014, à 12:39
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
Et voila ce que j'obtiens:
:~$ sudo smartctl -a /dev/sda
[sudo] password for adrien202:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M8 (AF)
Device Model: SAMSUNG HN-M101MBB
Serial Number: S2R8J1MBA06003
LU WWN Device Id: 5 0024e9 005152dc6
Firmware Version: 2AR10001
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Sep 2 12:33:02 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13320) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 222) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 8322
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3453
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2242
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7808
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 088 088 000 Old_age Always - 12503
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2113
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1628
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 062 042 000 Old_age Always - 38 (Min/Max 7/58)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 14605
223 Load_Retry_Count 0x0032 088 088 000 Old_age Always - 12503
225 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 142741
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.C'est moi ou tout n'a pas été testé?
Hors ligne
#11 Le 02/09/2014, à 14:13
- moko138
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
C'est moi ou tout n'a pas été testé?
Si, test complet.
197 Current_Pending_Sector (...) 3C'est un signe d'usure, ce n'est pas bon, mais ce n'est pas rédhibitoire.
9 Power_On_Hours (...) 78088000 heures ce n'est pas vieux.
11 Calibration_Retry_Count (...) 12503Pas top...
http://fr.wikipedia.org/wiki/Self-Monitoring,_Analysis_and_Reporting_Technology a écrit :
Cet attribut indique le nombre de fois qu’une recalibration a été relancée (à condition que la 1re tentative soit un échec). Une augmentation de cet attribut est signe de problèmes au niveau du sous-système mécanique du disque dur.
191 G-Sense_Error_Rate (...) 1628
http://smartlinux.sourceforge.net/smart/attributes.php a écrit :
Frequency of mistakes appearance as a result of impact loads
Il a pris des chocs, ton SAMSUNG HN-M101MBB ? En tout cas, à l'avenir évite de déplacer un pc en fonctionnement, ou alors procède trrrrrrrrrès doucement.
En conclusion, si tu arrives à utiliser ce disque, surveille une fois par mois l'évolution des données SMART.
Mais si tu peux le remplacer rapidement, tu t'éviteras bien des soucis (récupération de données, incertitude quant à la qualité des données enregistrées).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 02/09/2014, à 19:46
- Adrien202
Re : [Résolu] Problème boot DD après installation ubuntu 14.04
NP-RC530
euuuuh... Bah non, il me semble pas. J'ai pas mal voyagé et je l'emmène souvent partout avec moi mais il est toujours éteint.
Ok, merci du conseil 
je pense que je vais opter pour un remplacement rapide.
J'ai cherché un peu sur internet mais pour trouver un DD adapté à ma machine je galère un peu
Je passe le sujet en résolu. Merci à vous!
Hors ligne