#1 Le 11/09/2014, à 23:30
- cqfd93
Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bonsoir,
Après un nettoyage un peu trop brutal avec Ubuntu Tweak, je me retrouve dans l'impossibilité de démarrer et à la place de l'écran de connexion, j'ai juste un écran noir avec le message "Could not write bytes: Broken pipe".
Je suis sous Ubuntu 12.04.5, Unity, en principe bureau 3D.
moi@aurore:~$ cat /etc/issue
Ubuntu 12.04.5 LTS \n \l
moi@aurore:~$ uname -r
3.13.0-35-genericAvec le noyau précédent, le seul qui me reste, j'ai le même problème.
J'ai essayé de démarrer en mode failsafe et avec les deux noyaux, j'obtiens un message d'erreur qui commence par :
gdm unrecognized serviceet finit par :
x: cannot start /etc/X11/X (No such file or directory), abortingToujours en mode recovery, j'ai vérifié le système de fichiers (OK), passé sudo apt-get update et upgrade (OK).
J'ai aussi cherché sur le forum en démarrant en live session mais les quelques sujets que j'ai trouvés ne correspondaient pas au mien et ne m'ont rien apporté.
Revenue en recovery, j'ai installé gdm et là, j'ai pu démarrer ma session Unity mais bien que je choisisse Unity, je me retrouve avec Unity 2D, donc je ne suis pas encore revenue à la normale.
Après avoir réinstallé ubuntu-desktop, lightdm et unity, aucun changement : si je fais :
sudo dpkg-reconfigure lightdmje retrouve le problème au redémarrage et je suis obligée de redémarrer en recovery pour faire :
sudo dpkg-reconfigure gdmEt là, je sèche ! Merci d'avance pour votre aide !
− cqfd93 −
Hors ligne
#2 Le 11/09/2014, à 23:43
- J5012
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
quelles op utweak as-tu lance ?
sur u12.04, unity2d et unity (unity3d) sont dans des meta-paquets differents ...
Hors ligne
#3 Le 11/09/2014, à 23:53
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
J5012 a écrit :
quelles op utweak as-tu lance ?
Anciens noyaux, cache apt, configuration des paquets (c'est LA connerie, habituellement je n'y touche pas, juste un clic malheureux), paquets inutiles.
sur u12.04, unity2d et unity (unity3d) sont dans des meta-paquets differents ...
Je sais et ils sont tous les deux installés.
− cqfd93 −
Hors ligne
#4 Le 12/09/2014, à 00:16
- J5012
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
ah oui les paquets inutiles, j'avais deja fait une bourde de ce genre la : autoremove sur ubuntu-desktop mais en shell
j'ai remis ubuntu-desktop, et aussi remis les paquets X et cie ...
et avec ca ?
sudo dpkg --configure -aHors ligne
#5 Le 12/09/2014, à 00:46
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
J5012 a écrit :
j'ai remis ubuntu-desktop, et aussi remis les paquets X et cie ...
Pour les paquets X et cie, je ne sais pas quoi remettre...
et avec ca ?
sudo dpkg --configure -a
Y'a du mieux : lightdm ne démarre toujours pas (écran noir) mais avec gdm j'arrive bien à ma session Unity 3D.
− cqfd93 −
Hors ligne
#6 Le 12/09/2014, à 06:19
- J5012
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
tu obtiens le display manager gdm automatiquement ? si oui, c'est normal que lightdm ne se lance pas, le mecanisme des alternatives permet d'en desactiver un lors de l'install de l'autre ...
si non, essaies de lancer startx tout seul, si ca marche, X fonctionne ... si la session du bureau s'ouvre , X marche aussi ...
au cas ou , si tu veux installer X, le paquet dont dependent tous les paquets c'est xinit ...
edit : dans ton titre, l'alerte "broken pipe" n'est en aucun cas anti-fonctionnelle, sur mon ordi, j'ai plein de "broken pipe" a chaque reboot : j'explique ca par une possible desynchro entre le cache systeme et les caches disques (j'en ai deux) sur l'option acces disque "write back" ... je devrais le bidouiller pour le mettre en "write through" mais comme ca marche comme ca ...
Dernière modification par J5012 (Le 12/09/2014, à 06:23)
Hors ligne
#7 Le 12/09/2014, à 06:57
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
J5012 a écrit :
tu obtiens le display manager gdm automatiquement ? si oui, c'est normal que lightdm ne se lance pas, le mecanisme des alternatives permet d'en desactiver un lors de l'install de l'autre ...
Les 2 sont installés mais j'ai utilisé les commandes en alternance :
sudo dpkg-reconfigure gdm
sudo dpkg-reconfigure lightdmavec à chaque fois un redémarrage.
si non, essaies de lancer startx tout seul, si ca marche, X fonctionne ... si la session du bureau s'ouvre , X marche aussi ...
startx ne marche pas.
au cas ou , si tu veux installer X, le paquet dont dependent tous les paquets c'est xinit ...
OK, je regarderai ça.
edit : dans ton titre, l'alerte "broken pipe" n'est en aucun cas anti-fonctionnelle, sur mon ordi, j'ai plein de "broken pipe" a chaque reboot : j'explique ca par une possible desynchro entre le cache systeme et les caches disques (j'en ai deux) sur l'option acces disque "write back" ... je devrais le bidouiller pour le mettre en "write through" mais comme ca marche comme ca ...
C'est la première fois que je voyais un "broken pipe" sur le mien et le démarrage ne va pas plus loin.
− cqfd93 −
Hors ligne
#8 Le 12/09/2014, à 07:05
- J5012
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
chez moi ca va plus loin, et tout de suite apres j'ai le display manager lightdm ... peut etre chez toi il croit toujours que c'est lightdm (malgre le statut actif de gdm), et essaie de le lancer ... et comme lightdm ne repond pas, il tourne en rond ?
Hors ligne
#9 Le 12/09/2014, à 07:23
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Je ne pense pas parce que ça a commencé avant que j'installe gdm.
− cqfd93 −
Hors ligne
#10 Le 12/09/2014, à 09:47
- maxire
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Salut,
Pour diagnostiquer le problème de Lightdm, passer en mode console, arrêter le gestionnaire d'affichage (gdm ou lightdm) par la commande :
sudo service gdm stopou
sudo service lightdm stopLancer Lightdm en mode debug test::
sudo lightdm -d --test-modeTu devrais obtenir des messages complémentaires, ctrl-c pour arrêter le processus une fois celui-ci stoppé.
[Edit]
Pour écrire les messages dans le fichier ./lightdm.trace afin de nous faire suivre son contenu :
sudo lightdm -d --test-mode > lightdm.trace 2>&1Toujours ctrl-c pour toit arrêter et pour redémarrer gdm:
sudo service gdm startDernière modification par maxire (Le 12/09/2014, à 10:15)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#11 Le 12/09/2014, à 18:58
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bonjour maxire et merci pour ta réponse !
Voilà le retour de sudo lightdm -d --test-mode :
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.2.3, UID=0 PID=10646
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Adding default seat
[+0.00s] DEBUG: Starting seat
[+0.00s] DEBUG: Starting new display for greeter
[+0.00s] DEBUG: Starting local X display
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Activating VT 7
[+0.01s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
[+0.02s] DEBUG: Launching X Server
[+0.02s] DEBUG: Launching process 10653: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.02s] DEBUG: Waiting for ready signal from X server :0
[+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.02s] DEBUG: Process 10653 exited with return value 1
[+0.02s] DEBUG: X server stopped
[+0.02s] DEBUG: Removing X server authority /var/run/lightdm/root/:0
[+0.02s] DEBUG: Releasing VT 7
[+0.02s] DEBUG: Display server stopped
[+0.02s] DEBUG: Stopping display
[+0.02s] DEBUG: Display stopped
[+0.02s] DEBUG: Stopping X local seat, failed to start a display
[+0.02s] DEBUG: Stopping seat
[+0.02s] DEBUG: Seat stopped
[+0.02s] DEBUG: Required seat has stopped
[+0.02s] DEBUG: Stopping display manager
[+0.02s] DEBUG: Display manager stopped
[+0.02s] DEBUG: Stopping daemon
[+0.02s] DEBUG: Exiting with return value 1− cqfd93 −
Hors ligne
#12 Le 12/09/2014, à 19:40
- maxire
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Je ne peux pas te dire grand chose, si ce n'est que le problème est ici:
Process 10653 exited with return value 1Le Process 10653 est le serveur X, qui plante sans donner plus d'information.
Il faudrait jeter un œil dans le journal du serveur, en /var/log/Xorg0.log,
Voici un exemple de démarrage réussi de Lightdm:
[+0.01s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.01s] DEBUG: Starting Light Display Manager 1.10.1, UID=0 PID=1818
[+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.04s] DEBUG: Registered seat module xlocal
[+0.04s] DEBUG: Registered seat module xremote
[+0.04s] DEBUG: Registered seat module unity
[+0.04s] DEBUG: Registered seat module surfaceflinger
[+0.24s] DEBUG: Adding default seat
[+0.24s] DEBUG: Seat: Starting
[+0.24s] DEBUG: Seat: Creating greeter session
[+0.25s] DEBUG: Seat: Creating display server of type x
[+0.25s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.25s] DEBUG: Using VT 1
[+0.25s] DEBUG: Seat: Starting local X display on VT 1
[+0.25s] DEBUG: DisplayServer x-100: Logging to /var/log/lightdm/x-100.log
[+0.25s] DEBUG: DisplayServer x-100: Writing X server authority to /run/lightdm/root/:100
[+0.25s] DEBUG: DisplayServer x-100: Launching X Server
[+0.25s] DEBUG: Launching process 1822: /usr/bin/X :100 -seat seat0 -auth /run/lightdm/root/:100 -nolisten tcp vt1 -novtswitch
[+0.25s] DEBUG: DisplayServer x-100: Waiting for ready signal from X server :100
[+0.25s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.25s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.25s] DEBUG: Starting XDMCP server on UDP/IP port 177
[+0.28s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.28s] DEBUG: User /org/freedesktop/Accounts/User1001 added
[+0.28s] DEBUG: User /org/freedesktop/Accounts/User1002 added
[+0.29s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+0.63s] DEBUG: Got signal 10 from process 1822
[+0.63s] DEBUG: DisplayServer x-100: Got signal from X server :100
[+0.63s] DEBUG: DisplayServer x-100: Connecting to XServer :100
[+0.63s] DEBUG: Seat: Display server ready, starting session authentication
[+0.63s] DEBUG: Session pid=1831: Started with service 'lightdm-greeter', username 'lightdm'
[+0.70s] DEBUG: Session pid=1831: Authentication complete with return value 0: Success
[+0.70s] DEBUG: Seat: Session authenticated, running command
[+0.70s] DEBUG: Session pid=1831: Running command /usr/bin/lightdm-gtk-greeter
[+0.70s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+0.70s] DEBUG: Session pid=1831: Logging to /var/log/lightdm/x-100-greeter.log
[+0.71s] DEBUG: Activating VT 1
[+0.71s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c3
[+1.47s] DEBUG: Session pid=1831: Greeter connected version=1.10.1
[+1.80s] DEBUG: Session pid=1831: Greeter start authentication for frankenstein
[+1.80s] DEBUG: Session pid=1853: Started with service 'lightdm', username 'frankenstein'
[+1.83s] DEBUG: Session pid=1853: Got 1 message(s) from PAM
[+1.83s] DEBUG: Session pid=1831: Prompt greeter with 1 message(s)
[+17.02s] DEBUG: Got signal 2 from process 0
[+17.02s] DEBUG: Caught Interrupt signal, shutting down
[+17.02s] DEBUG: Stopping display manager
[+17.02s] DEBUG: Seat: Stopping
[+17.02s] DEBUG: Seat: Stopping display server
[+17.02s] DEBUG: Sending signal 15 to process 1822
[+17.02s] DEBUG: Seat: Stopping session
[+17.02s] DEBUG: Session pid=1831: Sending SIGTERM
[+17.02s] DEBUG: Seat: Stopping session
[+17.02s] DEBUG: Session pid=1853: Sending SIGTERM
[+17.02s] DEBUG: Session pid=1853: Terminated with signal 2
[+17.02s] DEBUG: Session: Failed during authentication
[+17.02s] DEBUG: Seat: Session stopped
[+17.02s] DEBUG: Session pid=1831: Terminated with signal 2
[+17.02s] DEBUG: Seat: Session stopped
[+17.04s] DEBUG: Process 1822 exited with return value 0
[+17.04s] DEBUG: DisplayServer x-100: X server stopped
[+17.04s] DEBUG: Releasing VT 1
[+17.04s] DEBUG: DisplayServer x-100: Removing X server authority /run/lightdm/root/:100
[+17.04s] DEBUG: Seat: Display server stopped
[+17.04s] DEBUG: Seat: Stopped
[+17.04s] DEBUG: Display manager stopped
[+17.04s] DEBUG: Stopping daemon
[+17.04s] DEBUG: Exiting with return value 0Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#13 Le 13/09/2014, à 19:40
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bonjour,
maxire a écrit :
Je ne peux pas te dire grand chose, si ce n'est que le problème est ici:
Process 10653 exited with return value 1Le Process 10653 est le serveur X, qui plante sans donner plus d'information.
Il faudrait jeter un œil dans le journal du serveur, en /var/log/Xorg0.log,
Je ne suis pas certaine d'avoir capturé le bon fichier log parce que quand X plante, je ne peux même plus changer de tty. Voilà ce que j'ai fait :
- d'abord dpkg-reconfigure lightdm
- reboot → freeze complet avec message broken pipe
- reboot en recovery
- choix d'une option qui monte les partitions en lecture/écriture (réparation des paquets cassé)
- copie de Xorg.0.log et Xorg.0.log.old vers mon /home
- dpkg-reconfigure gdm et reboot
Après tout ça, je pense que :
Xorg.0.log est celui du boot en recovery donc il est bon
Xorg.0.log.old est celui du boot avec lightdm
J'ai tout bon jusque là ?
Je te mets les 2 fichiers si tu veux les comparer mais si j'ai bien vu (avec Meld), il n'y a qu'une ligne de plus dans Xorg.0.log.old (ligne 390).
Xorg.0.log
[ 5536.452]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 5536.452] X Protocol Version 11, Revision 0
[ 5536.452] Build Operating System: Linux 2.6.42-61-generic x86_64 Ubuntu
[ 5536.452] Current Operating System: Linux aurore 3.13.0-35-generic #62~precise1-Ubuntu SMP Mon Aug 18 14:52:04 UTC 2014 x86_64
[ 5536.452] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=f7e7366b-7e46-4938-8a4a-5f7127c852a6 ro quiet splash vt.handoff=7
[ 5536.452] Build Date: 07 August 2014 11:49:36AM
[ 5536.452] xorg-server 2:1.15.1-0ubuntu2~precise2 (For technical support please see http://www.ubuntu.com/support)
[ 5536.452] Current version of pixman: 0.30.2
[ 5536.452] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5536.452] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5536.452] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 13 10:37:45 2014
[ 5536.452] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5536.453] (==) No Layout section. Using the first Screen section.
[ 5536.453] (==) No screen section available. Using defaults.
[ 5536.453] (**) |-->Screen "Default Screen Section" (0)
[ 5536.453] (**) | |-->Monitor "<default monitor>"
[ 5536.453] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5536.453] (==) Automatically adding devices
[ 5536.453] (==) Automatically enabling devices
[ 5536.453] (==) Automatically adding GPU devices
[ 5536.453] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5536.453] Entry deleted from font path.
[ 5536.453] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 5536.453] Entry deleted from font path.
[ 5536.454] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 5536.454] Entry deleted from font path.
[ 5536.454] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 5536.454] Entry deleted from font path.
[ 5536.454] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 5536.454] Entry deleted from font path.
[ 5536.454] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 5536.454] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 5536.454] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5536.454] (II) Loader magic: 0x7f824446ec20
[ 5536.454] (II) Module ABI versions:
[ 5536.454] X.Org ANSI C Emulation: 0.4
[ 5536.454] X.Org Video Driver: 15.0
[ 5536.454] X.Org XInput driver : 20.0
[ 5536.454] X.Org Server Extension : 8.0
[ 5536.454] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5536.456] (--) PCI:*(0:0:2:0) 8086:0116:1558:2700 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 5536.456] Initializing built-in extension Generic Event Extension
[ 5536.456] Initializing built-in extension SHAPE
[ 5536.456] Initializing built-in extension MIT-SHM
[ 5536.456] Initializing built-in extension XInputExtension
[ 5536.456] Initializing built-in extension XTEST
[ 5536.456] Initializing built-in extension BIG-REQUESTS
[ 5536.456] Initializing built-in extension SYNC
[ 5536.456] Initializing built-in extension XKEYBOARD
[ 5536.456] Initializing built-in extension XC-MISC
[ 5536.456] Initializing built-in extension SECURITY
[ 5536.456] Initializing built-in extension XINERAMA
[ 5536.456] Initializing built-in extension XFIXES
[ 5536.456] Initializing built-in extension RENDER
[ 5536.456] Initializing built-in extension RANDR
[ 5536.456] Initializing built-in extension COMPOSITE
[ 5536.456] Initializing built-in extension DAMAGE
[ 5536.456] Initializing built-in extension MIT-SCREEN-SAVER
[ 5536.456] Initializing built-in extension DOUBLE-BUFFER
[ 5536.456] Initializing built-in extension RECORD
[ 5536.456] Initializing built-in extension DPMS
[ 5536.456] Initializing built-in extension X-Resource
[ 5536.456] Initializing built-in extension XVideo
[ 5536.456] Initializing built-in extension XVideo-MotionCompensation
[ 5536.456] Initializing built-in extension XFree86-VidModeExtension
[ 5536.456] Initializing built-in extension XFree86-DGA
[ 5536.457] Initializing built-in extension XFree86-DRI
[ 5536.457] Initializing built-in extension DRI2
[ 5536.457] (II) LoadModule: "glx"
[ 5536.457] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5536.458] (II) Module glx: vendor="X.Org Foundation"
[ 5536.458] compiled for 1.15.1, module version = 1.0.0
[ 5536.458] ABI class: X.Org Server Extension, version 8.0
[ 5536.458] (==) AIGLX enabled
[ 5536.458] Loading extension GLX
[ 5536.458] (==) Matched intel as autoconfigured driver 0
[ 5536.458] (==) Matched intel as autoconfigured driver 1
[ 5536.458] (==) Matched modesetting as autoconfigured driver 2
[ 5536.458] (==) Matched fbdev as autoconfigured driver 3
[ 5536.458] (==) Matched vesa as autoconfigured driver 4
[ 5536.458] (==) Assigned the driver to the xf86ConfigLayout
[ 5536.458] (II) LoadModule: "intel"
[ 5536.458] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5536.458] (II) Module intel: vendor="X.Org Foundation"
[ 5536.458] compiled for 1.15.1, module version = 2.99.910
[ 5536.458] Module class: X.Org Video Driver
[ 5536.458] ABI class: X.Org Video Driver, version 15.0
[ 5536.458] (II) LoadModule: "modesetting"
[ 5536.458] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5536.458] (II) Module modesetting: vendor="X.Org Foundation"
[ 5536.458] compiled for 1.15.1, module version = 0.8.1
[ 5536.458] Module class: X.Org Video Driver
[ 5536.458] ABI class: X.Org Video Driver, version 15.0
[ 5536.458] (II) LoadModule: "fbdev"
[ 5536.459] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5536.459] (II) Module fbdev: vendor="X.Org Foundation"
[ 5536.459] compiled for 1.15.1, module version = 0.4.4
[ 5536.459] Module class: X.Org Video Driver
[ 5536.459] ABI class: X.Org Video Driver, version 15.0
[ 5536.459] (II) LoadModule: "vesa"
[ 5536.459] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5536.459] (II) Module vesa: vendor="X.Org Foundation"
[ 5536.459] compiled for 1.15.1, module version = 2.3.3
[ 5536.459] Module class: X.Org Video Driver
[ 5536.459] ABI class: X.Org Video Driver, version 15.0
[ 5536.459] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5536.459] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 5536.459] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 5536.460] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 5536.460] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5536.460] (II) FBDEV: driver for framebuffer: fbdev
[ 5536.460] (II) VESA: driver for VESA chipsets: vesa
[ 5536.460] (--) using VT number 8
[ 5536.465] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-trusty 2:2.99.910-0ubuntu1~precise1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 5536.465] (WW) Falling back to old probe method for modesetting
[ 5536.465] (WW) Falling back to old probe method for fbdev
[ 5536.465] (II) Loading sub module "fbdevhw"
[ 5536.465] (II) LoadModule: "fbdevhw"
[ 5536.465] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5536.465] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5536.465] compiled for 1.15.1, module version = 0.0.2
[ 5536.465] ABI class: X.Org Video Driver, version 15.0
[ 5536.465] (WW) Falling back to old probe method for vesa
[ 5536.466] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 5536.466] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 5536.466] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5536.466] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 5536.466] (==) intel(0): RGB weight 888
[ 5536.466] (==) intel(0): Default visual is TrueColor
[ 5536.466] (**) intel(0): Framebuffer tiled
[ 5536.466] (**) intel(0): Pixmaps tiled
[ 5536.466] (**) intel(0): "Tear free" disabled
[ 5536.466] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 5536.466] (II) intel(0): Output LVDS1 has no monitor section
[ 5536.468] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 5536.468] (II) intel(0): Output VGA1 has no monitor section
[ 5536.468] (II) intel(0): Output HDMI1 has no monitor section
[ 5536.468] (II) intel(0): Output DP1 has no monitor section
[ 5536.468] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 5536.468] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 5536.468] (==) intel(0): DPI set to (96, 96)
[ 5536.468] (II) Loading sub module "dri2"
[ 5536.468] (II) LoadModule: "dri2"
[ 5536.468] (II) Module "dri2" already built-in
[ 5536.469] (II) UnloadModule: "modesetting"
[ 5536.470] (II) Unloading modesetting
[ 5536.470] (II) UnloadModule: "fbdev"
[ 5536.470] (II) Unloading fbdev
[ 5536.470] (II) UnloadSubModule: "fbdevhw"
[ 5536.470] (II) Unloading fbdevhw
[ 5536.470] (II) UnloadModule: "vesa"
[ 5536.470] (II) Unloading vesa
[ 5536.470] (==) Depth 24 pixmap format is 32 bpp
[ 5536.471] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 5536.471] (==) intel(0): Backing store enabled
[ 5536.471] (==) intel(0): Silken mouse enabled
[ 5536.471] (II) intel(0): HW Cursor enabled
[ 5536.471] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5536.471] (==) intel(0): DPMS enabled
[ 5536.471] (II) intel(0): [DRI2] Setup complete
[ 5536.471] (II) intel(0): [DRI2] DRI driver: i965
[ 5536.471] (II) intel(0): [DRI2] VDPAU driver: i965
[ 5536.471] (II) intel(0): direct rendering: DRI2 Enabled
[ 5536.471] (==) intel(0): hotplug detection: "enabled"
[ 5536.472] (--) RandR disabled
[ 5536.485] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5536.485] (II) AIGLX: enabled GLX_ARB_create_context
[ 5536.485] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5536.485] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5536.485] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5536.485] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5536.485] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 5536.485] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 5536.485] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5536.485] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 5536.485] (II) AIGLX: Loaded and initialized i965
[ 5536.485] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5536.487] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 5536.504] (II) intel(0): Setting screen physical size to 423 x 238
[ 5536.519] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 5536.521] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5536.521] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5536.521] (II) LoadModule: "evdev"
[ 5536.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5536.521] (II) Module evdev: vendor="X.Org Foundation"
[ 5536.521] compiled for 1.15.1, module version = 2.8.2
[ 5536.521] Module class: X.Org XInput Driver
[ 5536.521] ABI class: X.Org XInput driver, version 20.0
[ 5536.521] (II) Using input driver 'evdev' for 'Power Button'
[ 5536.521] (**) Power Button: always reports core events
[ 5536.521] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 5536.522] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5536.522] (--) evdev: Power Button: Found keys
[ 5536.522] (II) evdev: Power Button: Configuring as keyboard
[ 5536.522] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 5536.522] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5536.522] (**) Option "xkb_rules" "evdev"
[ 5536.522] (**) Option "xkb_model" "pc105"
[ 5536.522] (**) Option "xkb_layout" "fr"
[ 5536.522] (**) Option "xkb_variant" "oss"
[ 5536.524] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 5536.525] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 5536.525] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5536.525] (II) Using input driver 'evdev' for 'Video Bus'
[ 5536.525] (**) Video Bus: always reports core events
[ 5536.525] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 5536.525] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5536.525] (--) evdev: Video Bus: Found keys
[ 5536.525] (II) evdev: Video Bus: Configuring as keyboard
[ 5536.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8"
[ 5536.525] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5536.525] (**) Option "xkb_rules" "evdev"
[ 5536.525] (**) Option "xkb_model" "pc105"
[ 5536.525] (**) Option "xkb_layout" "fr"
[ 5536.525] (**) Option "xkb_variant" "oss"
[ 5536.525] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5536.525] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5536.525] (II) Using input driver 'evdev' for 'Power Button'
[ 5536.525] (**) Power Button: always reports core events
[ 5536.526] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5536.526] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5536.526] (--) evdev: Power Button: Found keys
[ 5536.526] (II) evdev: Power Button: Configuring as keyboard
[ 5536.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 5536.526] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5536.526] (**) Option "xkb_rules" "evdev"
[ 5536.526] (**) Option "xkb_model" "pc105"
[ 5536.526] (**) Option "xkb_layout" "fr"
[ 5536.526] (**) Option "xkb_variant" "oss"
[ 5536.526] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 5536.526] (II) No input driver specified, ignoring this device.
[ 5536.526] (II) This device may have been added with another device file.
[ 5536.526] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 5536.526] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5536.526] (II) Using input driver 'evdev' for 'Sleep Button'
[ 5536.526] (**) Sleep Button: always reports core events
[ 5536.526] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 5536.526] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 5536.526] (--) evdev: Sleep Button: Found keys
[ 5536.526] (II) evdev: Sleep Button: Configuring as keyboard
[ 5536.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 5536.526] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5536.526] (**) Option "xkb_rules" "evdev"
[ 5536.526] (**) Option "xkb_model" "pc105"
[ 5536.526] (**) Option "xkb_layout" "fr"
[ 5536.526] (**) Option "xkb_variant" "oss"
[ 5536.527] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5536.527] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 5536.527] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event5)
[ 5536.527] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[ 5536.527] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[ 5536.527] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[ 5536.527] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event5"
[ 5536.527] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[ 5536.527] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[ 5536.527] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[ 5536.527] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[ 5536.527] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[ 5536.527] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[ 5536.527] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[ 5536.527] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[ 5536.527] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5536.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input11/event5"
[ 5536.527] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 10)
[ 5536.527] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[ 5536.528] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[ 5536.528] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[ 5536.528] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[ 5536.528] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[ 5536.528] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[ 5536.528] (II) No input driver specified, ignoring this device.
[ 5536.528] (II) This device may have been added with another device file.
[ 5536.528] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 5536.528] (II) No input driver specified, ignoring this device.
[ 5536.528] (II) This device may have been added with another device file.
[ 5536.528] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 5536.528] (II) No input driver specified, ignoring this device.
[ 5536.528] (II) This device may have been added with another device file.
[ 5536.529] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 5536.529] (II) No input driver specified, ignoring this device.
[ 5536.529] (II) This device may have been added with another device file.
[ 5536.529] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event6)
[ 5536.529] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall"
[ 5536.529] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset'
[ 5536.529] (**) Logitech Logitech Wireless Headset: always reports core events
[ 5536.529] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event6"
[ 5536.529] (II) evdev: Logitech Logitech Wireless Headset: Using mtdev for this device
[ 5536.529] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29
[ 5536.529] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes
[ 5536.529] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes
[ 5536.529] (II) evdev: Logitech Logitech Wireless Headset: No buttons found, faking one.
[ 5536.529] (--) evdev: Logitech Logitech Wireless Headset: Found keys
[ 5536.529] (II) evdev: Logitech Logitech Wireless Headset: Forcing relative x/y axes to exist.
[ 5536.529] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse
[ 5536.529] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard
[ 5536.529] (**) evdev: Logitech Logitech Wireless Headset: YAxisMapping: buttons 4 and 5
[ 5536.529] (**) evdev: Logitech Logitech Wireless Headset: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5536.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input12/event6"
[ 5536.529] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 11)
[ 5536.529] (**) Option "xkb_rules" "evdev"
[ 5536.529] (**) Option "xkb_model" "pc105"
[ 5536.529] (**) Option "xkb_layout" "fr"
[ 5536.529] (**) Option "xkb_variant" "oss"
[ 5536.530] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes.
[ 5536.530] (**) Logitech Logitech Wireless Headset: (accel) keeping acceleration scheme 1
[ 5536.530] (**) Logitech Logitech Wireless Headset: (accel) acceleration profile 0
[ 5536.530] (**) Logitech Logitech Wireless Headset: (accel) acceleration factor: 2.000
[ 5536.530] (**) Logitech Logitech Wireless Headset: (accel) acceleration threshold: 4
[ 5536.530] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event12)
[ 5536.530] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 5536.530] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 5536.530] (**) BisonCam, NB Pro: always reports core events
[ 5536.530] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event12"
[ 5536.530] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x315
[ 5536.530] (--) evdev: BisonCam, NB Pro: Found keys
[ 5536.530] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 5536.530] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input21/event12"
[ 5536.530] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 12)
[ 5536.530] (**) Option "xkb_rules" "evdev"
[ 5536.530] (**) Option "xkb_model" "pc105"
[ 5536.530] (**) Option "xkb_layout" "fr"
[ 5536.530] (**) Option "xkb_variant" "oss"
[ 5536.531] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 5536.531] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5536.531] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 5536.531] (**) AT Translated Set 2 keyboard: always reports core events
[ 5536.531] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 5536.531] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 5536.531] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 5536.531] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 5536.531] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 5536.531] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 5536.531] (**) Option "xkb_rules" "evdev"
[ 5536.531] (**) Option "xkb_model" "pc105"
[ 5536.531] (**) Option "xkb_layout" "fr"
[ 5536.531] (**) Option "xkb_variant" "oss"
[ 5536.532] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 5536.532] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 5536.532] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 5536.532] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 5536.532] (II) LoadModule: "synaptics"
[ 5536.532] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 5536.532] (II) Module synaptics: vendor="X.Org Foundation"
[ 5536.532] compiled for 1.15.1, module version = 1.7.4
[ 5536.532] Module class: X.Org XInput Driver
[ 5536.532] ABI class: X.Org XInput driver, version 20.0
[ 5536.532] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 5536.532] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 5536.532] (**) Option "Device" "/dev/input/event7"
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436 (res 0)
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044 (res 0)
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 5536.552] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 5536.552] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 5536.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input14/event7"
[ 5536.564] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 5536.564] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 5536.564] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 5536.564] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[ 5536.565] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 5536.565] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 5536.565] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 5536.565] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 5536.565] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 5536.566] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 5536.566] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 5536.581] (II) intel(0): EDID vendor "CMO", prod id 5904
[ 5536.581] (II) intel(0): Printing DDC gathered Modelines:
[ 5536.581] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 5547.384] (II) XKB: reuse xkmfile /var/lib/xkb/server-1F3E8BE074671EA0E74DD0B7B0BDBDD3E63B53BA.xkm
[ 5878.968] (II) UnloadModule: "synaptics"
[ 5878.968] (II) evdev: AT Translated Set 2 keyboard: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: BisonCam, NB Pro: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Logitech Logitech Wireless Headset: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Sleep Button: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Power Button: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Video Bus: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5878.968] (II) evdev: Power Button: Close
[ 5878.968] (II) UnloadModule: "evdev"
[ 5879.003] (EE) Server terminated successfully (0). Closing log file.Xorg.0.log.old
[ 22.737]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 22.737] X Protocol Version 11, Revision 0
[ 22.737] Build Operating System: Linux 2.6.42-61-generic x86_64 Ubuntu
[ 22.737] Current Operating System: Linux aurore 3.13.0-35-generic #62~precise1-Ubuntu SMP Mon Aug 18 14:52:04 UTC 2014 x86_64
[ 22.737] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=f7e7366b-7e46-4938-8a4a-5f7127c852a6 ro quiet splash vt.handoff=7
[ 22.737] Build Date: 07 August 2014 11:49:36AM
[ 22.737] xorg-server 2:1.15.1-0ubuntu2~precise2 (For technical support please see http://www.ubuntu.com/support)
[ 22.737] Current version of pixman: 0.30.2
[ 22.737] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.737] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.737] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 13 09:05:52 2014
[ 22.911] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.379] (==) No Layout section. Using the first Screen section.
[ 23.379] (==) No screen section available. Using defaults.
[ 23.379] (**) |-->Screen "Default Screen Section" (0)
[ 23.379] (**) | |-->Monitor "<default monitor>"
[ 23.432] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.432] (==) Automatically adding devices
[ 23.432] (==) Automatically enabling devices
[ 23.432] (==) Automatically adding GPU devices
[ 23.460] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.460] Entry deleted from font path.
[ 23.460] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.460] Entry deleted from font path.
[ 23.460] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 23.460] Entry deleted from font path.
[ 23.476] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.476] Entry deleted from font path.
[ 23.476] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 23.476] Entry deleted from font path.
[ 23.476] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 23.476] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 23.476] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.476] (II) Loader magic: 0x7f5fa4d33c20
[ 23.476] (II) Module ABI versions:
[ 23.476] X.Org ANSI C Emulation: 0.4
[ 23.476] X.Org Video Driver: 15.0
[ 23.476] X.Org XInput driver : 20.0
[ 23.476] X.Org Server Extension : 8.0
[ 23.476] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.478] (--) PCI:*(0:0:2:0) 8086:0116:1558:2700 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 23.496] Initializing built-in extension Generic Event Extension
[ 23.496] Initializing built-in extension SHAPE
[ 23.496] Initializing built-in extension MIT-SHM
[ 23.496] Initializing built-in extension XInputExtension
[ 23.496] Initializing built-in extension XTEST
[ 23.496] Initializing built-in extension BIG-REQUESTS
[ 23.496] Initializing built-in extension SYNC
[ 23.496] Initializing built-in extension XKEYBOARD
[ 23.496] Initializing built-in extension XC-MISC
[ 23.496] Initializing built-in extension SECURITY
[ 23.496] Initializing built-in extension XINERAMA
[ 23.496] Initializing built-in extension XFIXES
[ 23.496] Initializing built-in extension RENDER
[ 23.496] Initializing built-in extension RANDR
[ 23.496] Initializing built-in extension COMPOSITE
[ 23.496] Initializing built-in extension DAMAGE
[ 23.496] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.496] Initializing built-in extension DOUBLE-BUFFER
[ 23.496] Initializing built-in extension RECORD
[ 23.496] Initializing built-in extension DPMS
[ 23.496] Initializing built-in extension X-Resource
[ 23.496] Initializing built-in extension XVideo
[ 23.496] Initializing built-in extension XVideo-MotionCompensation
[ 23.496] Initializing built-in extension XFree86-VidModeExtension
[ 23.496] Initializing built-in extension XFree86-DGA
[ 23.496] Initializing built-in extension XFree86-DRI
[ 23.496] Initializing built-in extension DRI2
[ 23.496] (II) LoadModule: "glx"
[ 23.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.139] (II) Module glx: vendor="X.Org Foundation"
[ 24.139] compiled for 1.15.1, module version = 1.0.0
[ 24.139] ABI class: X.Org Server Extension, version 8.0
[ 24.139] (==) AIGLX enabled
[ 24.139] Loading extension GLX
[ 24.139] (==) Matched intel as autoconfigured driver 0
[ 24.139] (==) Matched intel as autoconfigured driver 1
[ 24.139] (==) Matched modesetting as autoconfigured driver 2
[ 24.139] (==) Matched fbdev as autoconfigured driver 3
[ 24.139] (==) Matched vesa as autoconfigured driver 4
[ 24.139] (==) Assigned the driver to the xf86ConfigLayout
[ 24.139] (II) LoadModule: "intel"
[ 24.246] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 24.370] (II) Module intel: vendor="X.Org Foundation"
[ 24.370] compiled for 1.15.1, module version = 2.99.910
[ 24.370] Module class: X.Org Video Driver
[ 24.370] ABI class: X.Org Video Driver, version 15.0
[ 24.370] (II) LoadModule: "modesetting"
[ 24.371] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.474] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.474] compiled for 1.15.1, module version = 0.8.1
[ 24.474] Module class: X.Org Video Driver
[ 24.474] ABI class: X.Org Video Driver, version 15.0
[ 24.474] (II) LoadModule: "fbdev"
[ 24.475] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.497] (II) Module fbdev: vendor="X.Org Foundation"
[ 24.497] compiled for 1.15.1, module version = 0.4.4
[ 24.497] Module class: X.Org Video Driver
[ 24.497] ABI class: X.Org Video Driver, version 15.0
[ 24.497] (II) LoadModule: "vesa"
[ 24.497] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.544] (II) Module vesa: vendor="X.Org Foundation"
[ 24.544] compiled for 1.15.1, module version = 2.3.3
[ 24.544] Module class: X.Org Video Driver
[ 24.544] ABI class: X.Org Video Driver, version 15.0
[ 24.544] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 24.557] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 24.557] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 24.557] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 24.557] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.557] (II) FBDEV: driver for framebuffer: fbdev
[ 24.557] (II) VESA: driver for VESA chipsets: vesa
[ 24.557] (++) using VT number 7
[ 24.583] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-trusty 2:2.99.910-0ubuntu1~precise1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 24.596] (WW) Falling back to old probe method for modesetting
[ 24.596] (WW) Falling back to old probe method for fbdev
[ 24.596] (II) Loading sub module "fbdevhw"
[ 24.596] (II) LoadModule: "fbdevhw"
[ 24.596] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 24.663] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 24.663] compiled for 1.15.1, module version = 0.0.2
[ 24.663] ABI class: X.Org Video Driver, version 15.0
[ 24.663] (WW) Falling back to old probe method for vesa
[ 24.680] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 24.680] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 24.680] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.680] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 24.680] (==) intel(0): RGB weight 888
[ 24.680] (==) intel(0): Default visual is TrueColor
[ 24.681] (**) intel(0): Framebuffer tiled
[ 24.681] (**) intel(0): Pixmaps tiled
[ 24.681] (**) intel(0): "Tear free" disabled
[ 24.681] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 24.681] (II) intel(0): Output LVDS1 has no monitor section
[ 24.682] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 24.682] (II) intel(0): Output VGA1 has no monitor section
[ 24.682] (II) intel(0): Output HDMI1 has no monitor section
[ 24.682] (II) intel(0): Output DP1 has no monitor section
[ 24.682] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 24.682] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 24.682] (==) intel(0): DPI set to (96, 96)
[ 24.682] (II) Loading sub module "dri2"
[ 24.682] (II) LoadModule: "dri2"
[ 24.682] (II) Module "dri2" already built-in
[ 24.683] (II) UnloadModule: "modesetting"
[ 24.683] (II) Unloading modesetting
[ 24.683] (II) UnloadModule: "fbdev"
[ 24.683] (II) Unloading fbdev
[ 24.683] (II) UnloadSubModule: "fbdevhw"
[ 24.683] (II) Unloading fbdevhw
[ 24.683] (II) UnloadModule: "vesa"
[ 24.683] (II) Unloading vesa
[ 24.683] (==) Depth 24 pixmap format is 32 bpp
[ 24.777] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 24.777] (==) intel(0): Backing store enabled
[ 24.777] (==) intel(0): Silken mouse enabled
[ 24.777] (II) intel(0): HW Cursor enabled
[ 24.777] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.800] (==) intel(0): DPMS enabled
[ 24.800] (II) intel(0): [DRI2] Setup complete
[ 24.800] (II) intel(0): [DRI2] DRI driver: i965
[ 24.800] (II) intel(0): [DRI2] VDPAU driver: i965
[ 24.800] (II) intel(0): direct rendering: DRI2 Enabled
[ 24.800] (==) intel(0): hotplug detection: "enabled"
[ 24.801] (--) RandR disabled
[ 25.416] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.416] (II) AIGLX: enabled GLX_ARB_create_context
[ 25.416] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 25.416] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 25.416] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.416] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.416] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 25.416] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 25.416] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.416] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 25.416] (II) AIGLX: Loaded and initialized i965
[ 25.416] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.431] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.442] (II) intel(0): Setting screen physical size to 423 x 238
[ 25.781] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 25.849] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.849] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.849] (II) LoadModule: "evdev"
[ 25.850] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.958] (II) Module evdev: vendor="X.Org Foundation"
[ 25.958] compiled for 1.15.1, module version = 2.8.2
[ 25.958] Module class: X.Org XInput Driver
[ 25.958] ABI class: X.Org XInput driver, version 20.0
[ 25.958] (II) Using input driver 'evdev' for 'Power Button'
[ 25.958] (**) Power Button: always reports core events
[ 25.958] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 25.958] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.958] (--) evdev: Power Button: Found keys
[ 25.958] (II) evdev: Power Button: Configuring as keyboard
[ 25.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 25.958] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.958] (**) Option "xkb_rules" "evdev"
[ 25.958] (**) Option "xkb_model" "pc105"
[ 25.958] (**) Option "xkb_layout" "fr"
[ 25.958] (**) Option "xkb_variant" "oss"
[ 25.960] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 25.976] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 25.976] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.976] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.976] (**) Video Bus: always reports core events
[ 25.976] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 25.976] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 25.976] (--) evdev: Video Bus: Found keys
[ 25.976] (II) evdev: Video Bus: Configuring as keyboard
[ 25.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8"
[ 25.976] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.976] (**) Option "xkb_rules" "evdev"
[ 25.976] (**) Option "xkb_model" "pc105"
[ 25.976] (**) Option "xkb_layout" "fr"
[ 25.976] (**) Option "xkb_variant" "oss"
[ 25.976] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 25.976] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.976] (II) Using input driver 'evdev' for 'Power Button'
[ 25.976] (**) Power Button: always reports core events
[ 25.976] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 25.976] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.976] (--) evdev: Power Button: Found keys
[ 25.976] (II) evdev: Power Button: Configuring as keyboard
[ 25.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 25.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 25.976] (**) Option "xkb_rules" "evdev"
[ 25.976] (**) Option "xkb_model" "pc105"
[ 25.976] (**) Option "xkb_layout" "fr"
[ 25.976] (**) Option "xkb_variant" "oss"
[ 25.977] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.977] (II) No input driver specified, ignoring this device.
[ 25.977] (II) This device may have been added with another device file.
[ 25.977] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 25.977] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.977] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.977] (**) Sleep Button: always reports core events
[ 25.977] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 25.977] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 25.977] (--) evdev: Sleep Button: Found keys
[ 25.977] (II) evdev: Sleep Button: Configuring as keyboard
[ 25.977] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 25.977] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 25.977] (**) Option "xkb_rules" "evdev"
[ 25.977] (**) Option "xkb_model" "pc105"
[ 25.977] (**) Option "xkb_layout" "fr"
[ 25.977] (**) Option "xkb_variant" "oss"
[ 25.978] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 25.978] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 25.978] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event5)
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[ 25.978] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[ 25.978] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event5"
[ 25.978] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[ 25.978] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[ 25.978] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[ 25.978] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[ 25.978] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[ 25.978] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[ 25.978] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[ 25.978] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[ 25.978] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input11/event5"
[ 25.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 10)
[ 25.978] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[ 25.978] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[ 25.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[ 25.979] (II) No input driver specified, ignoring this device.
[ 25.979] (II) This device may have been added with another device file.
[ 25.979] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 25.979] (II) No input driver specified, ignoring this device.
[ 25.979] (II) This device may have been added with another device file.
[ 25.979] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 25.979] (II) No input driver specified, ignoring this device.
[ 25.979] (II) This device may have been added with another device file.
[ 25.980] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 25.980] (II) No input driver specified, ignoring this device.
[ 25.980] (II) This device may have been added with another device file.
[ 25.980] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event6)
[ 25.980] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall"
[ 25.980] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset'
[ 25.980] (**) Logitech Logitech Wireless Headset: always reports core events
[ 25.980] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event6"
[ 25.980] (II) evdev: Logitech Logitech Wireless Headset: Using mtdev for this device
[ 25.980] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29
[ 25.980] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes
[ 25.980] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes
[ 25.980] (II) evdev: Logitech Logitech Wireless Headset: No buttons found, faking one.
[ 25.980] (--) evdev: Logitech Logitech Wireless Headset: Found keys
[ 25.980] (II) evdev: Logitech Logitech Wireless Headset: Forcing relative x/y axes to exist.
[ 25.980] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse
[ 25.980] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard
[ 25.980] (**) evdev: Logitech Logitech Wireless Headset: YAxisMapping: buttons 4 and 5
[ 25.980] (**) evdev: Logitech Logitech Wireless Headset: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input12/event6"
[ 25.980] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 11)
[ 25.980] (**) Option "xkb_rules" "evdev"
[ 25.980] (**) Option "xkb_model" "pc105"
[ 25.980] (**) Option "xkb_layout" "fr"
[ 25.980] (**) Option "xkb_variant" "oss"
[ 25.981] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes.
[ 25.981] (**) Logitech Logitech Wireless Headset: (accel) keeping acceleration scheme 1
[ 25.981] (**) Logitech Logitech Wireless Headset: (accel) acceleration profile 0
[ 25.981] (**) Logitech Logitech Wireless Headset: (accel) acceleration factor: 2.000
[ 25.981] (**) Logitech Logitech Wireless Headset: (accel) acceleration threshold: 4
[ 25.981] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event12)
[ 25.981] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 25.981] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 25.981] (**) BisonCam, NB Pro: always reports core events
[ 25.981] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event12"
[ 25.981] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x315
[ 25.981] (--) evdev: BisonCam, NB Pro: Found keys
[ 25.981] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 25.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input21/event12"
[ 25.981] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 12)
[ 25.981] (**) Option "xkb_rules" "evdev"
[ 25.981] (**) Option "xkb_model" "pc105"
[ 25.981] (**) Option "xkb_layout" "fr"
[ 25.981] (**) Option "xkb_variant" "oss"
[ 25.982] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 25.982] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.982] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.982] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.982] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 25.982] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 25.982] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 25.982] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.982] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 25.982] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 25.982] (**) Option "xkb_rules" "evdev"
[ 25.982] (**) Option "xkb_model" "pc105"
[ 25.982] (**) Option "xkb_layout" "fr"
[ 25.982] (**) Option "xkb_variant" "oss"
[ 25.982] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 25.982] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 25.982] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 25.982] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 25.982] (II) LoadModule: "synaptics"
[ 25.983] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.024] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.024] compiled for 1.15.1, module version = 1.7.4
[ 26.024] Module class: X.Org XInput Driver
[ 26.024] ABI class: X.Org XInput driver, version 20.0
[ 26.024] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 26.024] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 26.024] (**) Option "Device" "/dev/input/event7"
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436 (res 0)
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044 (res 0)
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 26.044] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 26.044] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 26.072] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input14/event7"
[ 26.072] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 26.072] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.072] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 26.072] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[ 26.072] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 26.072] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 26.072] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 26.072] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 26.072] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 26.072] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 26.072] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.135] (II) intel(0): EDID vendor "CMO", prod id 5904
[ 26.135] (II) intel(0): Printing DDC gathered Modelines:
[ 26.135] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 85.589] (II) XKB: reuse xkmfile /var/lib/xkb/server-1F3E8BE074671EA0E74DD0B7B0BDBDD3E63B53BA.xkm
[ 5332.192] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5369.385] (II) UnloadModule: "synaptics"
[ 5369.385] (II) evdev: AT Translated Set 2 keyboard: Close
[ 5369.385] (II) UnloadModule: "evdev"
[ 5369.385] (II) evdev: BisonCam, NB Pro: Close
[ 5369.385] (II) UnloadModule: "evdev"
[ 5369.385] (II) evdev: Logitech Logitech Wireless Headset: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.386] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.386] (II) evdev: Sleep Button: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.386] (II) evdev: Power Button: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.386] (II) evdev: Video Bus: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.386] (II) evdev: Power Button: Close
[ 5369.386] (II) UnloadModule: "evdev"
[ 5369.407] (EE) Server terminated successfully (0). Closing log file.Et voilà la ligne 390 :
[ 5332.192] (II) AIGLX: Suspending AIGLX clients for VT switchCe qui est bizarre, c'est que les 2 se terminent par
Server terminated successfully (0)− cqfd93 −
Hors ligne
#14 Le 14/09/2014, à 11:14
- maxire
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bon, rien n'est exploitable dans les logs de Xorg, la différence entre les 2 logs est je pense normale elle est due à la commande:
/usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitchoption -novtswitch utilisée dans le cas de lightdm et sans doute pas par gdm.
Tes problèmes venant d'un nettoyage abusif de configuration (je considère les outils du genre de Ubuntu tweak comme dangereux) il faudrait contrôler la configuration de lightdm, mais comme c'est un peu le bazar dans cette gestion de configuration je voudrais la réponse à cette commande histoire d'avoir les idées claires:
ls -laR /etc/lightdmEnvoies également le contenu de /etc/lightdm/lightdm.conf.
En prime, à tout hasard, j'aimerais le résultat de:
sudo ls -laR /var/lib/lightdmDernière modification par maxire (Le 14/09/2014, à 12:29)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#15 Le 14/09/2014, à 17:46
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bonjour,
Je n'avais jamais eu de problèmes avec Ubuntu Tweak jusqu'à présent (ça fait plusieurs années que je l'utilise) mais à l'avenir, je ferai davantage attention 
Voilà les retours :
moi@aurore:~$ ls -laR /etc/lightdm
/etc/lightdm:
total 24
drwxr-xr-x 2 root root 4096 sept. 11 12:03 .
drwxr-xr-x 157 root root 12288 sept. 14 07:50 ..
-rw-r--r-- 1 root root 66 juil. 22 00:05 lightdm.conf
-rw-r--r-- 1 root root 456 janv. 15 2013 users.conf
moi@aurore:~$ moi@aurore:~$ cat /etc/lightdm/lightdm.conf
[SeatDefaults]
greeter-session=unity-greeter
user-session=ubuntu
moi@aurore:~$ moi@aurore:~$ sudo ls -laR /var/lib/lightdm
[sudo] password for moi:
/var/lib/lightdm:
total 40
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 .
drwxr-xr-x 71 root root 4096 sept. 11 10:16 ..
drwx------ 4 lightdm lightdm 4096 juil. 21 23:41 .cache
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 .config
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 .dbus
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .gconf
drwx------ 2 lightdm lightdm 4096 juil. 21 23:41 .gvfs
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 .local
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .pulse
-rw------- 1 lightdm lightdm 256 juil. 21 23:41 .pulse-cookie
-rw------- 1 lightdm lightdm 0 sept. 10 09:44 .Xauthority
/var/lib/lightdm/.cache:
total 32
drwx------ 4 lightdm lightdm 4096 juil. 21 23:41 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 dconf
-rw-r--r-- 1 lightdm lightdm 16384 juil. 21 23:41 event-sound-cache.tdb.4e3703dce5a8eb1f7452dea30000001f.x86_64-pc-linux-gnu
drwxrwxr-x 2 lightdm lightdm 4096 sept. 10 09:43 unity-greeter
/var/lib/lightdm/.cache/dconf:
total 8
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .
drwx------ 4 lightdm lightdm 4096 juil. 21 23:41 ..
-rw------- 1 lightdm lightdm 1 sept. 10 09:43 user
/var/lib/lightdm/.cache/unity-greeter:
total 12
drwxrwxr-x 2 lightdm lightdm 4096 sept. 10 09:43 .
drwx------ 4 lightdm lightdm 4096 juil. 21 23:41 ..
-rw-rw-r-- 1 lightdm lightdm 24 sept. 10 09:43 state
/var/lib/lightdm/.config:
total 12
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 dconf
/var/lib/lightdm/.config/dconf:
total 12
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 ..
-rw-rw-r-- 1 lightdm lightdm 2168 sept. 10 09:43 user
/var/lib/lightdm/.dbus:
total 12
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
drwx------ 2 lightdm lightdm 4096 août 30 16:57 session-bus
/var/lib/lightdm/.dbus/session-bus:
total 16
drwx------ 2 lightdm lightdm 4096 août 30 16:57 .
drwx------ 3 lightdm lightdm 4096 juil. 21 23:41 ..
-rw-rw-r-- 1 lightdm lightdm 463 sept. 10 09:43 4e3703dce5a8eb1f7452dea30000001f-0
-rw-rw-r-- 1 lightdm lightdm 464 août 30 17:16 4e3703dce5a8eb1f7452dea30000001f-1
/var/lib/lightdm/.gconf:
total 8
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
/var/lib/lightdm/.gvfs:
total 8
drwx------ 2 lightdm lightdm 4096 juil. 21 23:41 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
/var/lib/lightdm/.local:
total 12
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 share
/var/lib/lightdm/.local/share:
total 12
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 .
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 ..
drwxrwxr-x 2 lightdm lightdm 4096 juil. 21 23:41 icc
/var/lib/lightdm/.local/share/icc:
total 12
drwxrwxr-x 2 lightdm lightdm 4096 juil. 21 23:41 .
drwxrwxr-x 3 lightdm lightdm 4096 juil. 21 23:41 ..
-rw-rw-r-- 1 lightdm lightdm 1252 juil. 21 23:41 edid-f05588be605964a3c4a48edd4513f0a4.icc
/var/lib/lightdm/.pulse:
total 44
drwx------ 2 lightdm lightdm 4096 sept. 10 09:43 .
drwxr-x--- 9 lightdm lightdm 4096 sept. 10 09:44 ..
-rw-r--r-- 1 lightdm lightdm 696 juil. 21 23:41 4e3703dce5a8eb1f7452dea30000001f-card-database.tdb
-rw-r--r-- 1 lightdm lightdm 43 sept. 10 09:44 4e3703dce5a8eb1f7452dea30000001f-default-sink
-rw-r--r-- 1 lightdm lightdm 42 sept. 10 09:44 4e3703dce5a8eb1f7452dea30000001f-default-source
-rw-r--r-- 1 lightdm lightdm 12288 août 28 08:03 4e3703dce5a8eb1f7452dea30000001f-device-volumes.tdb
lrwxrwxrwx 1 lightdm lightdm 23 sept. 10 09:43 4e3703dce5a8eb1f7452dea30000001f-runtime -> /tmp/pulse-CcctT9RwKSB1
-rw-r--r-- 1 lightdm lightdm 12288 juil. 21 23:41 4e3703dce5a8eb1f7452dea30000001f-stream-volumes.tdb
moi@aurore:~$ Tout ça ne me parle pas vraiment 
− cqfd93 −
Hors ligne
#16 Le 14/09/2014, à 18:52
- maxire
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
La dernière connexion réussie via lightdm daterait-elle du 10 septembre à 10h 09 min. 43 sec?
Le fichier de configuration lightdm.conf me semble normal, unity-greeter est-il bien toujours présent?
Il devrait être en /usr/bin, si mes souvenirs sont bons (je n'utilise pas unity).
whereis unity-greeterdevrait nous dire où il se trouve.
Je ne vois pas trop quel est le problème.
Dernière modification par maxire (Le 14/09/2014, à 19:10)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#17 Le 14/09/2014, à 19:21
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
maxire a écrit :
La dernière connexion réussie via lightdm daterait-elle du 10 septembre à 10h 09 min. 43 sec?
Le fichier de configuration lightdm.conf me semble normal, unity-greeter est-il bien toujours présent?
Il devrait être en /usr/bin, si mes souvenirs sont bons (je n'utilise pas unity).whereis unity-greeterdevrait nous dire où il se trouve.
Je ne vois pas trop quel est le problème.
Exact, c'était le 10 septembre.
moi@aurore:~$ whereis unity-greeter
unity-greeter: /usr/sbin/unity-greeter /usr/share/unity-greeter
moi@aurore:~$ Moi non plus, je ne vois pas, mais ça n'est peut-être pas utile d'y perdre trop de temps, puisque gdm marche et tout le reste est normal.
En tout cas, merci de te pencher sur ce problème.
Je vais m'absenter pour plusieurs heures.
− cqfd93 −
Hors ligne
#18 Le 26/11/2014, à 14:54
- dpa787
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
bonjour,
je rencontre un pb très similaire sur une config Ubuntu 12.04.05 lts x86_64 en contexte gnome-classic sur un portable dell m6400.
uname -a donne
Linux ... 3.13.0-40-generic #69~precise1 ...
Après utilisation de Ubuntu Tweak en mode "nettoyage" 
, (ancien noyau, données de config. etc ...) , je me retrouve avec
une machine qui ne propose plus la session X11/lightdm. Je m'en suis sorti en activant gdm mais
toutes mes tentatives pour reconfigurer lightdm, plymouth , et re-avoir une config stable échouent .
note: je ai découvert le pb tardivement lors d'1 reboot - rare ds mon mode de travail le portable passant
plutot en mode veille. Je peux fournir des traces bien sur.
merci.
libriste mais plus je pratique l'informatique plus j'admire la fiabilité de mon mouli-persi
Hors ligne
#19 Le 26/11/2014, à 18:27
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Bonjour,
Apparemment, on a fait la même connerie avec les mêmes conséquences :-( Mais mis à part que je ne peux plus utiliser lightdm, le reste fonctionne, ça n'est pas le cas chez toi ?
− cqfd93 −
Hors ligne
#20 Le 27/11/2014, à 07:30
- dpa787
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Oui, c'est bien cela. Il y a des dysfonctionnements de détail:
- après mise en veille, le 1er redémarrage (ouverture écran) remet l'ordi en veille ; il faut appuyer une 2nd fois sur power ..
- le chargement de la session gnome prend qqfois plusieurs minutes avant d'afficher bandeau, espace de travail ...
- nautilus "gèle" disons 1 utilisation sur dix ...
J'ai fait d'ubuntu mon env de travail #1 en passant à la 10.04lts qui était "bulletproof" ; depuis la 12.04, c'est chaotique ...
cqfd93 a écrit :
Bonjour,
Apparemment, on a fait la même connerie avec les mêmes conséquences :-( Mais mis à part que je ne peux plus utiliser lightdm, le reste fonctionne, ça n'est pas le cas chez toi ?
libriste mais plus je pratique l'informatique plus j'admire la fiabilité de mon mouli-persi
Hors ligne
#21 Le 27/11/2014, à 11:23
- maxire
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Salut,
Décidément Ubuntu Tweak fait du dégât, 10.04 LTS Bulletproof oui tout à fait, il n'y a pas photo.
J'ai bien peur que la solution la plus simple et la plus rapide est de réinstaller la 12.04 après un reformatage de la partition / et nettoyage des fichiers de config locaux comme .config .local et .cache (les renommer puis enrichir les nouvelles versions à partir des anciennes si nécessaire) puis à terme de tester Ubuntu Mate (disponible en 14.04 je crois).
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#22 Le 27/11/2014, à 14:28
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
dpa787 a écrit :
Oui, c'est bien cela. Il y a des dysfonctionnements de détail:
- après mise en veille, le 1er redémarrage (ouverture écran) remet l'ordi en veille ; il faut appuyer une 2nd fois sur power ..
J'ai exactement le même problème, mais ça a commencé bien avant mon utilisation malheureuse de Ubuntu Tweak. Certainement après une mise à jour de noyau mais je ne sais pas lequel. Pour le reste, chez moi, tout va bien.
− cqfd93 −
Hors ligne
#23 Le 27/11/2014, à 14:35
- cqfd93
Re : Lightdm ne démarre plus, message "Could not write bytes: Broken pipe"
Salut,
maxire a écrit :
J'ai bien peur que la solution la plus simple et la plus rapide est de réinstaller la 12.04 après un reformatage de la partition / et nettoyage des fichiers de config locaux comme .config .local et .cache (les renommer puis enrichir les nouvelles versions à partir des anciennes si nécessaire) puis à terme de tester Ubuntu Mate (disponible en 14.04 je crois).
À part 2 problèmes pas trop graves (impossibilité d'utiliser lightdm et retour de veille), ma 12.04.5 marche très bien et je n'envisage pas encore de la réinstaller. J'y viendrai peut-être un jour si j'ai un problème plus sérieux.
− cqfd93 −
Hors ligne