#26 Le 08/10/2014, à 16:35
- Gaara
Re : scanner canon MG 2450 résolu
:~$ cat /etc/sane.d/canon.conf
#canon.conf
scsi CANON IX
Le fichier canon_dr est un peu plus fourni:
:~$ cat /etc/sane.d/canon_dr.conf
#######################################################################
# NOTE: 'option' lines only apply to the devices found by
# the NEXT 'usb' or 'scsi' line. You may repeat the option line if
# required for multiple scanners of different models/connections.
#######################################################################
# Some machines are incapable of providing basic inquiry info, and will
# lock up if asked for it. The driver will not ask for this info if all
# three of these options are provided. They should NOT be used unless
# you know for sure that your machine requires it.
# NOTE: the vendor and model must be correct. The version need not.
#option vendor-name CANON
#option model-name DR-2050C
#option version-name XXXX
#######################################################################
# Set data buffer size, in bytes. The value ranges from 4096 - infinity
# large values may cause timeouts, small causes slow scans. 4MB default
#option buffer-size 4194304
#######################################################################
# Most scanners dont pad their reads
#option padded-read 0
#######################################################################
# SCSI scanners:
# To search for any CANON scsi device, if name starts with 'CR' or 'DR'
scsi CANON CR
scsi CANON DR
# To use a specific scsi device
#scsi /dev/sg1
#######################################################################
# USB scanners:
# For Canon scanners connected via USB on a known device (kernel driver):
#usb /dev/usb/scanner0
# For Canon scanners connected via USB using vendor and device ids (libusb):
#usb VENDORID PRODUCTID
# NOTE: if you have to add your device here- please send the id and model
# to the author via email, so it can be included in next version. kitno455 at
# gmail dot com - with canon_dr in the subject line
# DR-2080C (uses weird protocol)
option vendor-name CANON
option model-name DR-2080C
option version-name XXXX
option padded-read 1
usb 0x04a9 0x1601
# CR-180
usb 0x04a9 0x1602
# DR-9080C
usb 0x04a9 0x1603
# DR-7080C
usb 0x04a9 0x1604
# DR-5010C
usb 0x04a9 0x1606
# DR-6080C
usb 0x04a9 0x1607
# DR-2580C
usb 0x04a9 0x1608
# DR-3080CII
usb 0x04a9 0x1609
# DR-2050C/SP (uses weird protocol)
option vendor-name CANON
option model-name DR-2050C
option version-name XXXX
option padded-read 1
usb 0x04a9 0x160a
# DR-7580
usb 0x04a9 0x160b
# CR-55
usb 0x1083 0x160c
# DR-1210C (two versions?)
usb 0x1083 0x160f
usb 0x04a9 0x2222
# DR-4010C
usb 0x1083 0x1614
# DR-2510C
usb 0x1083 0x1617
# DR-X10C
usb 0x1083 0x1618
# CR-25
usb 0x1083 0x161a
# DR-2010C
usb 0x1083 0x161b
# DR-3010C
usb 0x1083 0x161d
# DR-7090C
usb 0x1083 0x1620
# DR-9050C
usb 0x1083 0x1622
# DR-7550C
usb 0x1083 0x1623
# DR-6050C
usb 0x1083 0x1624
# DR-6010C
usb 0x1083 0x1626
# CR-190i
usb 0x1083 0x162b
# DR-6030C
usb 0x1083 0x1638
# CR-135i
usb 0x1083 0x1639
Si j'essayais d'y ajouter cette ligne ?
# MP230
usb 0x04a9 0x175f
Kubuntu 18.04 x64
Un terminal tactile Raspberry Pi et Odroid
<code>zenity --question --title "Alert" --text "Microsoft Windows has been found! Would you like to remove it?"</code>
Hors ligne
#27 Le 08/10/2014, à 16:41
- sylvain3800
Re : scanner canon MG 2450 résolu
oui essaye d'ajouter cette ligne dans les deux fichiers
et si sane-find-scanner ne te trouve toujours pas
alors je n'ai plus d'autre idée
Cogito ergo sum = je consome donc je suis : je pense, donc je suis !
Hors ligne
#28 Le 08/10/2014, à 18:03
- Gaara
Re : scanner canon MG 2450 résolu
Bon ben nan, ça marche pas.
Tant pis, je reste avec le logiciel propriétaire.
Merci !
Kubuntu 18.04 x64
Un terminal tactile Raspberry Pi et Odroid
<code>zenity --question --title "Alert" --text "Microsoft Windows has been found! Would you like to remove it?"</code>
Hors ligne
#29 Le 08/10/2014, à 18:22
- sylvain3800
Re : scanner canon MG 2450 résolu
on aura essayé
Salut
Cogito ergo sum = je consome donc je suis : je pense, donc je suis !
Hors ligne