Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/11/2014, à 20:36

Coban5

Touchpad freeze

Bonjour,
Je viens de passer sous Ubuntu et j'ai un problème avec mon touchpad:
après quelques minutes d'utilisation, tout le système est "gelé" et je ne peux rien faire, pas un raccourci clavier ne fonctionne, impossible de démarrer le terminal. En rabattant l'écran pour mettre en veille, le système est dégelé à la sortie de veille mais le problème réapparaît quelques minutes après.
Aucun problème avec la souris cependant.
Ma configuration:
Asus k55vm
touchpad Elantech
Ubuntu 14.04
Quelqu’un aurait il une solution?

Merci de vos réponses,

Coban

Hors ligne

#2 Le 15/11/2014, à 19:30

foustala

Re : Touchpad freeze

puisque le système se dégèle, donne le résultat de

dmesg

juste après le dégèl

qu'est ce qui gèle exactement touchap, ou touchpad + clavier, ou touchpad + clavier + souris

Hors ligne

#3 Le 15/11/2014, à 22:57

Coban5

Re : Touchpad freeze

C'est tout qui gèle et l'utilisation du touchpad qui fait geler

heu... mais c'est très long... et tout loge pas dans le terminal
voici la fin:

[15547.151136] smpboot: CPU 6 is now offline
[15547.152573] kvm: disabling virtualization on CPU7
[15547.255091] smpboot: CPU 7 is now offline
[15547.256561] ACPI: Low-level resume complete
[15547.256606] PM: Restoring platform NVS memory
[15547.258405] Enabling non-boot CPUs ...
[15547.258448] x86: Booting SMP configuration:
[15547.258449] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15547.269831] kvm: enabling virtualization on CPU1
[15547.272252] CPU1 is up
[15547.272273] smpboot: Booting Node 0 Processor 2 APIC 0x4
[15547.283771] kvm: enabling virtualization on CPU2
[15547.286156] CPU2 is up
[15547.286179] smpboot: Booting Node 0 Processor 3 APIC 0x6
[15547.297684] kvm: enabling virtualization on CPU3
[15547.300058] CPU3 is up
[15547.300080] smpboot: Booting Node 0 Processor 4 APIC 0x1
[15547.311572] kvm: enabling virtualization on CPU4
[15547.313935] CPU4 is up
[15547.313952] smpboot: Booting Node 0 Processor 5 APIC 0x3
[15547.325398] kvm: enabling virtualization on CPU5
[15547.327797] CPU5 is up
[15547.327817] smpboot: Booting Node 0 Processor 6 APIC 0x5
[15547.339281] kvm: enabling virtualization on CPU6
[15547.341639] CPU6 is up
[15547.341659] smpboot: Booting Node 0 Processor 7 APIC 0x7
[15547.353127] kvm: enabling virtualization on CPU7
[15547.355489] CPU7 is up
[15547.365165] ACPI: Waking up from system sleep state S3
[15547.457996] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15547.489972] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[15547.521951] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[15547.586032] PM: noirq resume of devices complete after 159.908 msecs
[15547.586153] PM: early resume of devices complete after 0.096 msecs
[15547.586218] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[15547.586440] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[15547.698095] [drm] Wrong MCH_SSKPD value: 0x20100406
[15547.698096] [drm] This can cause pipe underruns and display issues.
[15547.698096] [drm] Please upgrade your BIOS to fix this.
[15547.797928] usb 1-1.1: reset full-speed USB device number 15 using ehci-pci
[15547.889969] usb 1-1.1: device firmware changed
[15547.913724] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15547.916597] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15547.916601] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15547.922359] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15547.922363] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15547.924865] ata3.00: configured for UDMA/133
[15548.913224] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[15550.312541] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15550.313432] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15550.313733] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15550.313738] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15550.315473] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15550.315688] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15550.315692] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15550.316380] ata1.00: configured for UDMA/133
[15550.332663] sd 0:0:0:0: [sda] Starting disk
[15550.359079] PM: resume of devices complete after 2774.343 msecs
[15550.359242] PM: Finishing wakeup.
[15550.360447] usb 1-1.1: USB disconnect, device number 15
[15550.359244] Restarting tasks ... done.
[15550.388856] video LNXVIDEO:00: Restoring backlight state
[15550.389085] video LNXVIDEO:01: Restoring backlight state
[15550.436513] usb 1-1.1: new full-speed USB device number 16 using ehci-pci
[15550.530467] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15550.530470] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15550.530471] usb 1-1.1: Product: Bluetooth USB Host Controller
[15550.530472] usb 1-1.1: Manufacturer: Atheros Communications
[15550.530474] usb 1-1.1: SerialNumber: Alaska Day 2006
[15550.575800] usb 1-1.1: USB disconnect, device number 16
[15550.808412] usb 1-1.1: new full-speed USB device number 17 using ehci-pci
[15551.576987] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15551.666657] r8169 0000:04:00.2 eth0: link down
[15551.666730] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[15553.588411] wlan0: authenticate with 34:8a:ae:24:55:90
[15553.611457] wlan0: send auth to 34:8a:ae:24:55:90 (try 1/3)
[15553.613922] wlan0: authenticated
[15553.614789] wlan0: associate with 34:8a:ae:24:55:90 (try 1/3)
[15553.621532] wlan0: RX AssocResp from 34:8a:ae:24:55:90 (capab=0x431 status=0 aid=1)
[15553.621592] wlan0: associated
[15553.621606] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15553.622186] cfg80211: Calling CRDA for country: FR
[15553.624420] ath: EEPROM regdomain: 0x80fa
[15553.624422] ath: EEPROM indicates we should expect a country code
[15553.624423] ath: doing EEPROM country->regdmn map search
[15553.624424] ath: country maps to regdmn code: 0x37
[15553.624425] ath: Country alpha2 being used: FR
[15553.624426] ath: Regpair used: 0x37
[15553.624427] ath: regdomain 0x80fa dynamically updated by country IE
[15553.624442] cfg80211: Regulatory domain changed to country: FR
[15553.624443] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15553.624444] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.624445] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.624446] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.624447] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15553.624448] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[15553.629937] wlan0: deauthenticating from 34:8a:ae:24:55:90 by local choice (reason=2)
[15553.643400] cfg80211: Calling CRDA to update world regulatory domain
[15553.643489] wlan0: authenticate with 34:8a:ae:24:55:90
[15553.660730] wlan0: send auth to 34:8a:ae:24:55:90 (try 1/3)
[15553.660880] cfg80211: World regulatory domain updated:
[15553.660882] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15553.660883] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15553.660885] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15553.660886] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15553.660886] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15553.660887] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15553.663219] wlan0: authenticated
[15553.666773] wlan0: associate with 34:8a:ae:24:55:90 (try 1/3)
[15553.671539] wlan0: RX AssocResp from 34:8a:ae:24:55:90 (capab=0x431 status=0 aid=1)
[15553.671589] wlan0: associated
[15553.671648] cfg80211: Calling CRDA for country: FR
[15553.674994] ath: EEPROM regdomain: 0x80fa
[15553.674999] ath: EEPROM indicates we should expect a country code
[15553.675001] ath: doing EEPROM country->regdmn map search
[15553.675003] ath: country maps to regdmn code: 0x37
[15553.675006] ath: Country alpha2 being used: FR
[15553.675007] ath: Regpair used: 0x37
[15553.675010] ath: regdomain 0x80fa dynamically updated by country IE
[15553.675032] cfg80211: Regulatory domain changed to country: FR
[15553.675034] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15553.675037] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.675039] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.675041] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15553.675044] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15553.675046] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[15555.900030] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15555.900038] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15555.900042] usb 1-1.1: Product: Bluetooth USB Host Controller
[15555.900045] usb 1-1.1: Manufacturer: Atheros Communications
[15555.900048] usb 1-1.1: SerialNumber: Alaska Day 2006
[15599.135470] usb 3-2: new low-speed USB device number 7 using xhci_hcd
[15599.155546] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[15599.155554] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15599.155558] usb 3-2: Product: USB Optical Mouse
[15599.155561] usb 3-2: Manufacturer: Logitech
[15599.155792] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[15599.157742] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input57
[15599.158213] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
[15670.367152] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
[15670.560389] wlan0: deauthenticating from 34:8a:ae:24:55:90 by local choice (reason=3)
[15670.575970] cfg80211: Calling CRDA to update world regulatory domain
[15670.583153] cfg80211: World regulatory domain updated:
[15670.583159] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15670.583162] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15670.583165] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15670.583167] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15670.583170] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15670.583172] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15672.430277] PM: Syncing filesystems ... done.
[15673.325042] PM: Preparing system for mem sleep
[15673.629518] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15673.631337] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15673.632554] PM: Entering mem sleep
[15673.632881] Suspending console(s) (use no_console_suspend to debug)
[15673.633080] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15673.633254] sd 0:0:0:0: [sda] Stopping disk
[15673.651747] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18
[15674.029168] PM: suspend of devices complete after 396.392 msecs
[15674.045133] PM: late suspend of devices complete after 15.970 msecs
[15674.077128] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[15674.093200] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[15674.125012] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15674.141030] PM: noirq suspend of devices complete after 95.945 msecs
[15674.141238] ACPI: Preparing to enter system sleep state S3
[15674.225125] PM: Saving platform NVS memory
[15674.232174] Disabling non-boot CPUs ...
[15674.233418] kvm: disabling virtualization on CPU1
[15674.233432] smpboot: CPU 1 is now offline
[15674.234913] kvm: disabling virtualization on CPU2
[15674.336845] smpboot: CPU 2 is now offline
[15674.338310] kvm: disabling virtualization on CPU3
[15674.440799] smpboot: CPU 3 is now offline
[15674.442263] kvm: disabling virtualization on CPU4
[15674.544749] smpboot: CPU 4 is now offline
[15674.546199] kvm: disabling virtualization on CPU5
[15674.648691] smpboot: CPU 5 is now offline
[15674.650140] kvm: disabling virtualization on CPU6
[15674.752636] smpboot: CPU 6 is now offline
[15674.754060] kvm: disabling virtualization on CPU7
[15674.856577] smpboot: CPU 7 is now offline
[15674.858040] ACPI: Low-level resume complete
[15674.858086] PM: Restoring platform NVS memory
[15674.859878] Enabling non-boot CPUs ...
[15674.859920] x86: Booting SMP configuration:
[15674.859922] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15674.871405] kvm: enabling virtualization on CPU1
[15674.873824] CPU1 is up
[15674.873845] smpboot: Booting Node 0 Processor 2 APIC 0x4
[15674.885342] kvm: enabling virtualization on CPU2
[15674.887732] CPU2 is up
[15674.887753] smpboot: Booting Node 0 Processor 3 APIC 0x6
[15674.899259] kvm: enabling virtualization on CPU3
[15674.901642] CPU3 is up
[15674.901664] smpboot: Booting Node 0 Processor 4 APIC 0x1
[15674.913151] kvm: enabling virtualization on CPU4
[15674.915530] CPU4 is up
[15674.915548] smpboot: Booting Node 0 Processor 5 APIC 0x3
[15674.926994] kvm: enabling virtualization on CPU5
[15674.929369] CPU5 is up
[15674.929386] smpboot: Booting Node 0 Processor 6 APIC 0x5
[15674.940845] kvm: enabling virtualization on CPU6
[15674.943206] CPU6 is up
[15674.943223] smpboot: Booting Node 0 Processor 7 APIC 0x7
[15674.954694] kvm: enabling virtualization on CPU7
[15674.957094] CPU7 is up
[15674.966746] ACPI: Waking up from system sleep state S3
[15675.035494] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15675.067464] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[15675.099448] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[15675.163531] PM: noirq resume of devices complete after 159.902 msecs
[15675.163653] PM: early resume of devices complete after 0.098 msecs
[15675.163715] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[15675.163876] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[15675.243597] [drm] Wrong MCH_SSKPD value: 0x20100406
[15675.243597] [drm] This can cause pipe underruns and display issues.
[15675.243597] [drm] Please upgrade your BIOS to fix this.
[15675.375467] usb 1-1.1: reset full-speed USB device number 17 using ehci-pci
[15675.467512] usb 1-1.1: device firmware changed
[15675.559187] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15675.562125] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15675.562128] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15675.567900] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15675.567904] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15675.570413] ata3.00: configured for UDMA/133
[15676.874515] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[15678.237866] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15678.248853] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15678.249153] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15678.249157] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15678.250942] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15678.251168] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15678.251172] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15678.251876] ata1.00: configured for UDMA/133
[15678.265912] sd 0:0:0:0: [sda] Starting disk
[15678.291284] PM: resume of devices complete after 3129.231 msecs
[15678.291453] PM: Finishing wakeup.
[15678.291781] usb 1-1.1: USB disconnect, device number 17
[15678.291454] Restarting tasks ... done.
[15678.318123] video LNXVIDEO:00: Restoring backlight state
[15678.318319] video LNXVIDEO:01: Restoring backlight state
[15678.361848] usb 1-1.1: new full-speed USB device number 18 using ehci-pci
[15678.455674] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15678.455681] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15678.455685] usb 1-1.1: Product: Bluetooth USB Host Controller
[15678.455688] usb 1-1.1: Manufacturer: Atheros Communications
[15678.455691] usb 1-1.1: SerialNumber: Alaska Day 2006
[15678.502144] usb 3-2: USB disconnect, device number 7
[15678.747269] usb 1-1.1: USB disconnect, device number 18
[15678.945555] usb 1-1.1: new full-speed USB device number 19 using ehci-pci
[15679.047276] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15679.052253] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15679.052256] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15679.052257] usb 1-1.1: Product: Bluetooth USB Host Controller
[15679.052259] usb 1-1.1: Manufacturer: Atheros Communications
[15679.052260] usb 1-1.1: SerialNumber: Alaska Day 2006
[15679.148235] r8169 0000:04:00.2 eth0: link down
[15679.148279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[15680.165960] wlan0: authenticate with 34:8a:ae:24:55:90
[15680.183424] wlan0: send auth to 34:8a:ae:24:55:90 (try 1/3)
[15680.185885] wlan0: authenticated
[15680.188803] wlan0: associate with 34:8a:ae:24:55:90 (try 1/3)
[15680.197152] wlan0: RX AssocResp from 34:8a:ae:24:55:90 (capab=0x431 status=0 aid=1)
[15680.197208] wlan0: associated
[15680.197226] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15680.197442] cfg80211: Calling CRDA for country: FR
[15680.200579] ath: EEPROM regdomain: 0x80fa
[15680.200586] ath: EEPROM indicates we should expect a country code
[15680.200590] ath: doing EEPROM country->regdmn map search
[15680.200593] ath: country maps to regdmn code: 0x37
[15680.200597] ath: Country alpha2 being used: FR
[15680.200600] ath: Regpair used: 0x37
[15680.200605] ath: regdomain 0x80fa dynamically updated by country IE
[15680.200632] cfg80211: Regulatory domain changed to country: FR
[15680.200636] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15680.200641] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15680.200645] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15680.200648] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15680.200652] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15680.200656] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[15692.114842] usb 3-2: new low-speed USB device number 8 using xhci_hcd
[15692.135258] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[15692.135263] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15692.135265] usb 3-2: Product: USB Optical Mouse
[15692.135267] usb 3-2: Manufacturer: Logitech
[15692.135476] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[15692.137486] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input64
[15692.137949] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
[15762.282090] usb 3-2: USB disconnect, device number 8
[15831.987213] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
[15832.179137] wlan0: deauthenticating from 34:8a:ae:24:55:90 by local choice (reason=3)
[15832.194531] cfg80211: Calling CRDA to update world regulatory domain
[15832.200877] cfg80211: World regulatory domain updated:
[15832.200881] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15832.200882] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15832.200884] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15832.200885] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15832.200886] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15832.200887] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15833.801580] PM: Syncing filesystems ... done.
[15834.436212] PM: Preparing system for mem sleep
[15834.697815] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15834.699562] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15834.700780] PM: Entering mem sleep
[15834.701107] Suspending console(s) (use no_console_suspend to debug)
[15834.701285] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15834.702020] sd 0:0:0:0: [sda] Stopping disk
[15834.719923] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18
[15835.101520] PM: suspend of devices complete after 400.521 msecs
[15835.117453] PM: late suspend of devices complete after 15.938 msecs
[15835.149448] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[15835.165517] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[15835.197331] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15835.213351] PM: noirq suspend of devices complete after 95.945 msecs
[15835.213559] ACPI: Preparing to enter system sleep state S3
[15835.297490] PM: Saving platform NVS memory
[15835.304512] Disabling non-boot CPUs ...
[15835.305750] kvm: disabling virtualization on CPU1
[15835.306026] smpboot: CPU 1 is now offline
[15835.307442] kvm: disabling virtualization on CPU2
[15835.409169] smpboot: CPU 2 is now offline
[15835.410632] kvm: disabling virtualization on CPU3
[15835.513111] smpboot: CPU 3 is now offline
[15835.514582] kvm: disabling virtualization on CPU4
[15835.617057] smpboot: CPU 4 is now offline
[15835.618532] kvm: disabling virtualization on CPU5
[15835.721005] smpboot: CPU 5 is now offline
[15835.722453] kvm: disabling virtualization on CPU6
[15835.824958] smpboot: CPU 6 is now offline
[15835.826400] kvm: disabling virtualization on CPU7
[15835.928897] smpboot: CPU 7 is now offline
[15835.930379] ACPI: Low-level resume complete
[15835.930426] PM: Restoring platform NVS memory
[15835.932212] Enabling non-boot CPUs ...
[15835.932255] x86: Booting SMP configuration:
[15835.932256] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15835.943737] kvm: enabling virtualization on CPU1
[15835.946158] CPU1 is up
[15835.946179] smpboot: Booting Node 0 Processor 2 APIC 0x4
[15835.957675] kvm: enabling virtualization on CPU2
[15835.960076] CPU2 is up
[15835.960098] smpboot: Booting Node 0 Processor 3 APIC 0x6
[15835.971604] kvm: enabling virtualization on CPU3
[15835.973983] CPU3 is up
[15835.974004] smpboot: Booting Node 0 Processor 4 APIC 0x1
[15835.985492] kvm: enabling virtualization on CPU4
[15835.987875] CPU4 is up
[15835.987892] smpboot: Booting Node 0 Processor 5 APIC 0x3
[15835.999339] kvm: enabling virtualization on CPU5
[15836.001706] CPU5 is up
[15836.001723] smpboot: Booting Node 0 Processor 6 APIC 0x5
[15836.013184] kvm: enabling virtualization on CPU6
[15836.015541] CPU6 is up
[15836.015557] smpboot: Booting Node 0 Processor 7 APIC 0x7
[15836.027024] kvm: enabling virtualization on CPU7
[15836.029426] CPU7 is up
[15836.039080] ACPI: Waking up from system sleep state S3
[15836.119803] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15836.151773] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[15836.183759] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[15836.247834] PM: noirq resume of devices complete after 159.902 msecs
[15836.247949] PM: early resume of devices complete after 0.091 msecs
[15836.248005] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[15836.248235] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[15836.327873] [drm] Wrong MCH_SSKPD value: 0x20100406
[15836.327873] [drm] This can cause pipe underruns and display issues.
[15836.327874] [drm] Please upgrade your BIOS to fix this.
[15836.459732] usb 1-1.1: reset full-speed USB device number 19 using ehci-pci
[15836.551778] usb 1-1.1: device firmware changed
[15836.567538] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15836.570454] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15836.570458] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15836.576212] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15836.576215] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15836.578730] ata3.00: configured for UDMA/133
[15837.770919] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[15838.982347] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15838.983230] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15838.983509] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15838.983513] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15838.985218] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15838.985392] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[15838.985395] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15838.986091] ata1.00: configured for UDMA/133
[15839.002428] sd 0:0:0:0: [sda] Starting disk
[15839.025245] PM: resume of devices complete after 2778.717 msecs
[15839.025410] PM: Finishing wakeup.
[15839.025411] Restarting tasks ... done.
[15839.032038] usb 1-1.1: USB disconnect, device number 19
[15839.050725] video LNXVIDEO:00: Restoring backlight state
[15839.050955] video LNXVIDEO:01: Restoring backlight state
[15839.102291] usb 1-1.1: new full-speed USB device number 20 using ehci-pci
[15839.196387] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15839.196390] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15839.196391] usb 1-1.1: Product: Bluetooth USB Host Controller
[15839.196393] usb 1-1.1: Manufacturer: Atheros Communications
[15839.196394] usb 1-1.1: SerialNumber: Alaska Day 2006
[15839.241235] usb 1-1.1: USB disconnect, device number 20
[15839.442142] usb 1-1.1: new full-speed USB device number 21 using ehci-pci
[15839.536420] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[15839.536435] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15839.536437] usb 1-1.1: Product: Bluetooth USB Host Controller
[15839.536438] usb 1-1.1: Manufacturer: Atheros Communications
[15839.536440] usb 1-1.1: SerialNumber: Alaska Day 2006
[15840.101511] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15840.208709] r8169 0000:04:00.2 eth0: link down
[15840.208776] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[15841.217773] wlan0: authenticate with 34:8a:ae:24:55:90
[15841.235320] wlan0: send auth to 34:8a:ae:24:55:90 (try 1/3)
[15841.238828] wlan0: authenticated
[15841.241130] wlan0: associate with 34:8a:ae:24:55:90 (try 1/3)
[15841.245852] wlan0: RX AssocResp from 34:8a:ae:24:55:90 (capab=0x431 status=0 aid=1)
[15841.245900] wlan0: associated
[15841.245928] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15841.246004] cfg80211: Calling CRDA for country: FR
[15841.248885] ath: EEPROM regdomain: 0x80fa
[15841.248890] ath: EEPROM indicates we should expect a country code
[15841.248892] ath: doing EEPROM country->regdmn map search
[15841.248894] ath: country maps to regdmn code: 0x37
[15841.248897] ath: Country alpha2 being used: FR
[15841.248899] ath: Regpair used: 0x37
[15841.248901] ath: regdomain 0x80fa dynamically updated by country IE
[15841.248926] cfg80211: Regulatory domain changed to country: FR
[15841.248928] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15841.248931] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15841.248933] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15841.248935] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15841.248938] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15841.248940] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)

merci,

Hors ligne

#4 Le 15/11/2014, à 23:04

foustala

Re : Touchpad freeze

le fichier entier est situé là /var/log/dmesg ou kern.log

le kern.log est mieux car il est horodaté. peux tu localiser l'heure du freeze à la seconde pret dans le kern.log

donne aussi le résultat de

lsusb
xinput list

Dernière modification par foustala (Le 16/11/2014, à 01:02)

Hors ligne

#5 Le 15/11/2014, à 23:54

foustala

Re : Touchpad freeze

Coban5 a écrit :
[15599.135470] usb 3-2: new low-speed USB device number 7 using xhci_hcd
[15599.155546] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[15599.155554] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15599.155558] usb 3-2: Product: USB Optical Mouse
[15599.155561] usb 3-2: Manufacturer: Logitech
[15599.155792] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[15599.157742] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input57
[15599.158213] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0

à priori c'est la séquence qui précède le freeze. il y a bcp d'historique https://www.google.fr/search?q=USB+HID+v1.11+Mouse+[Logitech+USB+Optical+Mouse]

à priori c'est une souris usb externe. peux tu la débrancher et voir si le freeze se reproduit

Hors ligne

#6 Le 30/11/2014, à 22:45

Coban5

Re : Touchpad freeze

Désolé pour le délai,
voici un extrais du kern.log,  le plantage est survenu à exactement 22:38:00, il n'y a rien d'anormal apparemment non?

Nov 30 22:12:20 nicolas-K55VM kernel: [71768.046014] wlan0: send auth to 2a:a4:3c:85:e1:a8 (try 2/3)
Nov 30 22:12:20 nicolas-K55VM kernel: [71768.072834] wlan0: authenticated
Nov 30 22:12:20 nicolas-K55VM kernel: [71768.073103] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
Nov 30 22:12:20 nicolas-K55VM kernel: [71768.073975] wlan0: associate with 2a:a4:3c:85:e1:a8 (try 1/3)
Nov 30 22:12:20 nicolas-K55VM kernel: [71768.083366] wlan0: RX AssocResp from 2a:a4:3c:85:e1:a8 (capab=0x431 status=0 aid=1)
Nov 30 22:12:20 nicolas-K55VM kernel: [71768.083675] wlan0: associated
Nov 30 22:38:13 nicolas-K55VM kernel: [73320.196136] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
Nov 30 22:38:14 nicolas-K55VM kernel: [73320.650805] PM: Syncing filesystems ... done.
Nov 30 22:38:14 nicolas-K55VM kernel: [73320.786682] PM: Preparing system for mem sleep
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.103539] Freezing user space processes ... (elapsed 0.001 seconds) done.
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.105302] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.106489] PM: Entering mem sleep
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.106842] Suspending console(s) (use no_console_suspend to debug)
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.106983] wlan0: deauthenticating from 2a:a4:3c:85:e1:a8 by local choice (reason=3)
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.147142] cfg80211: Calling CRDA to update world regulatory domain
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.147206] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.147497] sd 0:0:0:0: [sda] Stopping disk
Nov 30 22:38:22 nicolas-K55VM kernel: [73321.165727] mei_me 0000:00:16.0: H_RDY is not cleared

Ici, la souris n'était pas branchée, ce n'est pas elle qui cause ce problème, c'est bien l’utilisation du toutchpad.

Hors ligne