#26 Le 17/12/2014, à 18:44
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Secure Boot Violation
Invalid signature detected. Check Secure
Boot policy in setup
Ok
Désactive le BootSecure.
En ligne
#27 Le 17/12/2014, à 19:00
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
okay à présent je suis dans le monde merveilleux de super grub2 et je nage totale...
je ne vois pas trop quoi faire...j'ai peur de faire des conneries...
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#28 Le 17/12/2014, à 19:12
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Everything, c’est bien. Appuie sur [Entrée] puis voyons ce qu’il propose ensuite.
En ligne
#30 Le 17/12/2014, à 20:02
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Sélectionne (hd1,gpt1)/efi/ubuntu/shimx64.efi (hd1,gpt1) et appuie sur [Entrée] et voyons s’il démarre avec ça.
En ligne
#31 Le 17/12/2014, à 20:12
- ikewdu
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Donc, les fichiers sont bien là... c'est bel et bien un blocage au niveau du bios, cette histoire.
Hors ligne
#32 Le 17/12/2014, à 21:45
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Sélectionne (hd1,gpt1)/efi/ubuntu/shimx64.efi (hd1,gpt1) et appuie sur [Entrée] et voyons s’il démarre avec ça.
je l'ai fait et ça a bien démarré sur ubuntu puis j'ai redémarré et j'ai eu le message d'erreur
reboot and select proper boot device
or insert boot media in selected boot device and press a key
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#33 Le 17/12/2014, à 21:53
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Eh bien, recommence, et reste dans la session de l’Ubuntu installé tant qu’on ne te demande pas de redémarrer.
En ligne
#34 Le 17/12/2014, à 22:27
- ikewdu
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Re,
Tu devrais explorer ton bios à fond.... il y a quelque part une fonction bloquante que tu dois pouvoir désactiver. Il n'y a aucune raison que ça fonctionne avec SGD2 et pas directement. Au pire, appelle le sav et demande-leur des explications. Il ne peuvent interdire un démarrage sur un autre système sans sans enfreindre la loi européenne. Il y a donc nécessairement un moyen.
Hors ligne
#35 Le 17/12/2014, à 22:49
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Eh bien, recommence, et reste dans la session de l’Ubuntu installé tant qu’on ne te demande pas de redémarrer.
j'ai refait 10x la même opération mais cette fois ça ne redémarre plus sur ubuntu
ça redémarre de nouveau sur le message:
reboot and select proper boot device
or insert boot media in selected boot device and press a key
sur (hd1,gpt1)/efi/ubuntu/shimx64.efi (hd1,gpt1) je fais enter
puis je dois aller sur reboot ou halt pour faire redémarrer le système.
Je ne comprends pas pour quoi ça a marché avant et plus à présent (?)
Dernière modification par souen (Le 17/12/2014, à 23:00)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#36 Le 17/12/2014, à 22:50
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Re,
Tu devrais explorer ton bios à fond.... il y a quelque part une fonction bloquante que tu dois pouvoir désactiver. Il n'y a aucune raison que ça fonctionne avec SGD2 et pas directement. Au pire, appelle le sav et demande-leur des explications. Il ne peuvent interdire un démarrage sur un autre système sans sans enfreindre la loi européenne. Il y a donc nécessairement un moyen.
Oui je regarderai ça de plus près demain, là ce truc me sors par les oreilles. Merci pour votre aide en tous cas.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#37 Le 17/12/2014, à 23:08
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
[…]
sur (hd1,gpt1)/efi/ubuntu/shimx64.efi (hd1,gpt1) je fais enter
puis je dois aller sur reboot ou halt pour faire redémarrer le système.
Je ne comprends pas pour quoi ça a marché avant et plus à présent (?)
C’est vrai que c’est à n’y rien comprendre cette histoire.
Dans ce cas, tu peux essayer la ligne Linux /boot/vmlinuz-3.13.0-32-generic (hd1,gpt2).
Si ça ne marche pas, tu essayes la ligne suivante et ainsi de suite jusqu’à ce qu’il y en ait une qui fonctionne.
Mais commence effectivement par appliquer le conseil d’ikewdu. Bien entendu, demain, après une bonne nuit de sommeil.
En ligne
#38 Le 17/12/2014, à 23:37
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
oui comme tu dis nany bonne nuit
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#39 Le 18/12/2014, à 07:25
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Dans la photo du post #4, on peut voir "Fast Boot Enabled" : essaie de modifier ça pour avoir "Fast Boot Disabled"
Hors ligne
#40 Le 18/12/2014, à 07:45
- ikewdu
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Salut malbo,
Proposé ici :
http://forum.ubuntu-fr.org/viewtopic.ph … #p18782721
Hors ligne
#41 Le 18/12/2014, à 08:22
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
@ikewdu : désolé, j'ai posté trop vite sans relire toute la discussion.
Hors ligne
#42 Le 18/12/2014, à 11:24
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Hello, voici les news du front et elles sont plutôt bonnes :-)
J'ai effectivement bien vérifié de désactiver le "fast boot" et le "quiet boot" du bios.
Puis j'ai refait une installation du système complet puis là tout est en ordre cette fois.
ça redémarre bien. Vous pensez que le problème venait simplement de là?
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#43 Le 18/12/2014, à 11:31
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Bonjour,
Depuis une session de ton Ubuntu fraîchement installé(*), je te prie de faire un Boot-Info et de donner l'URL du Boot-Info dans ta réponse.
(*) Ne fais pas ce Boot-Info depuis une session live mais fais-le bien depuis une session du Ubuntu installé parce que de cette façon on peut voir comment fonctionne l'UEFI
Hors ligne
#44 Le 18/12/2014, à 11:59
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
voici -> http://paste.ubuntu.com/9558916/
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#45 Le 18/12/2014, à 12:09
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> Windows 2000/XP/2003 is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: The info in boot sector on the starting sector of the
MFT is wrong. The info in the boot sector on the
starting sector of the MFT Mirror is wrong.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,946,320,895 1,946,318,848 83 Linux
/dev/sda2 1,946,322,942 1,953,523,711 7,200,770 5 Extended
/dev/sda5 1,946,322,944 1,953,523,711 7,200,768 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Note: sector size is 4096 (not 512)
Disk /dev/sdc: 3000.6 GB, 3000590401536 bytes
255 heads, 63 sectors/track, 45600 cylinders, total 732566016 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 256 732,566,015 732,565,760 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 10011f25-209b-4982-9f48-6e40abc7234f ext4
/dev/sda5 59ecaa4e-cb64-4ff2-a38c-d35526ace1e2 swap
/dev/sdc1 FCEE9D38EE9CEBE0 ntfs Elements
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 18 10:45 ata-HL-DT-ST_DVDRAM_GHA2N_KECD8G85000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 18 10:58 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 18 10:45 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 18 10:45 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 18 10:45 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Dec 18 10:58 ata-WDC_WD30EZRX-00DC0B0_WD-WCC1T0275166 -> ../../sdc
lrwxrwxrwx 1 root root 9 Dec 18 10:45 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 18 10:45 usb-WD_Ext_HDD_1021_574343315430323735313636-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Dec 18 10:58 wwn-0x50014ee208efdaea -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 18 10:45 wwn-0x50014ee208efdaea-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 18 10:45 wwn-0x50014ee208efdaea-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 18 10:45 wwn-0x50014ee208efdaea-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Dec 18 10:58 wwn-0x50014ee25d5ee524 -> ../../sdc
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sdc1 /media/ubuntu/Elements fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-10011f25-209b-4982-9f48-6e40abc7234f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
linux /boot/vmlinuz-3.13.0-43-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-10011f25-209b-4982-9f48-6e40abc7234f' {
menuentry 'Ubuntu, avec Linux 3.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-advanced-10011f25-209b-4982-9f48-6e40abc7234f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
echo 'Chargement de Linux 3.13.0-43-generic…'
linux /boot/vmlinuz-3.13.0-43-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-recovery-10011f25-209b-4982-9f48-6e40abc7234f' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
echo 'Chargement de Linux 3.13.0-43-generic…'
linux /boot/vmlinuz-3.13.0-43-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-10011f25-209b-4982-9f48-6e40abc7234f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-10011f25-209b-4982-9f48-6e40abc7234f' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 10011f25-209b-4982-9f48-6e40abc7234f
else
search --no-floppy --fs-uuid --set=root 10011f25-209b-4982-9f48-6e40abc7234f
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=10011f25-209b-4982-9f48-6e40abc7234f / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=59ecaa4e-cb64-4ff2-a38c-d35526ace1e2 none swap sw 0 0
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 00 03 e1 9e 9a 00 00 00 03 e4 9c 9e 00 00 00 03 |................|
00000010 e6 8d 9b 00 00 00 03 e4 9c 9f 00 00 00 03 e3 b0 |................|
00000020 ba 00 00 00 03 e5 95 a3 00 00 00 03 e2 be 99 00 |................|
00000030 00 00 03 e5 8e a4 00 00 00 03 e6 9d ba 00 00 00 |................|
00000040 03 e3 aa b5 00 00 00 03 e1 85 9e 00 00 00 03 e2 |................|
00000050 b9 a4 00 00 00 03 e2 b5 be 00 00 00 03 e5 bc 94 |................|
00000060 00 00 00 03 e6 82 b8 00 00 00 03 e1 bc 8d 00 00 |................|
00000070 00 03 e6 8e a5 00 00 00 03 e4 ae ac 00 00 00 03 |................|
00000080 e4 b4 ac 00 00 00 03 e3 9e b8 00 00 00 03 e0 ba |................|
00000090 bb 00 00 00 03 e2 91 93 00 00 00 03 e6 97 95 00 |................|
000000a0 00 00 03 e2 b8 b5 00 00 00 03 e3 b2 8a 00 00 00 |................|
000000b0 03 e3 bd b8 00 00 00 03 e3 b2 8b 00 00 00 03 e1 |................|
000000c0 aa a3 00 00 00 03 e2 a8 b5 00 00 00 03 e1 95 b3 |................|
000000d0 00 00 00 03 e3 92 9f 00 00 00 03 e5 a3 9a 00 00 |................|
000000e0 00 03 e0 a8 ac 00 00 00 03 e1 89 bf 00 00 00 03 |................|
000000f0 e4 95 a5 00 00 00 03 e2 af b8 00 00 00 03 e1 b0 |................|
00000100 a4 00 00 00 03 e4 81 8b 00 00 00 03 e3 84 b0 00 |................|
00000110 00 00 03 e0 a9 b1 00 00 00 03 e4 ac a0 00 00 00 |................|
00000120 03 e2 bc b5 00 00 00 03 e1 96 91 00 00 00 03 e3 |................|
00000130 86 90 00 00 00 03 e5 93 b2 00 00 00 03 e0 a8 8c |................|
00000140 00 00 00 03 e3 a0 8a 00 00 00 03 e4 98 95 00 00 |................|
00000150 00 03 e1 8a a2 00 00 00 03 e3 87 97 00 00 00 03 |................|
00000160 e1 88 99 00 00 00 03 e1 8f b3 00 00 00 03 e1 a6 |................|
00000170 bd 00 00 00 03 e2 98 9d 00 00 00 02 d6 bb 00 00 |................|
00000180 00 03 e2 b5 bd 00 00 00 03 e1 87 b1 00 00 00 03 |................|
00000190 e4 84 bf 00 00 00 03 e1 8b bd 00 00 00 03 e2 88 |................|
000001a0 a3 00 00 00 03 e4 ac 90 00 00 00 03 e2 bb bf 00 |................|
000001b0 00 00 03 e6 85 b4 00 00 00 03 e5 93 b3 00 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 e0 6d 00 00 00 |............m...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
MFT Sector of sdc1
00000000 50 89 51 f4 87 8c 69 25 a4 be 07 01 2e 01 c2 86 |P.Q...i%........|
00000010 38 fb 6b 96 7f 87 f6 f5 a0 fc 8f c1 61 3d bd ed |8.k.........a=..|
00000020 db d4 f3 e5 63 6a 8e 76 80 7d 20 71 ed a0 1f 8b |....cj.v.} q....|
00000030 69 5b 35 8f 06 61 b0 22 b0 b8 ce d3 04 8f ab 4a |i[5..a.".......J|
00000040 42 5c f3 76 6e 2e f9 84 64 2b 77 39 3a 0c ad ae |B\.vn...d+w9:...|
00000050 a1 70 78 19 61 48 94 54 b9 7f 8a 45 57 98 f7 0a |.px.aH.T...EW...|
00000060 28 0e 29 08 51 3f 23 1c f7 d6 86 af 0a 6d 9f aa |(.).Q?#......m..|
00000070 75 65 35 51 05 e7 0a dc a6 a2 6a c4 45 1c e7 05 |ue5Q......j.E...|
00000080 b0 71 b7 e3 a6 ac 2e eb 0a 97 75 2a 0b 75 07 aa |.q........u*.u..|
00000090 91 23 c2 09 11 d8 81 24 b2 da 0a 4e 52 ad a0 75 |.#.....$...NR..u|
000000a0 1d 8f 6d 05 1d ee 86 55 e3 4f 87 c1 c6 1b 53 81 |..m....U.O....S.|
000000b0 33 14 4f 95 bc 80 12 36 f3 db 93 9f 8d 25 10 21 |3.O....6.....%.!|
000000c0 c7 fe 21 9b 5c 78 b1 59 3f 80 2d 6b f2 91 b1 4a |..!.\x.Y?.-k...J|
000000d0 51 7b 95 28 0e 0f dc fb ea ee b7 62 51 eb 54 fa |Q{.(.......bQ.T.|
000000e0 6c 29 4e d5 13 22 9f ff 00 de b3 93 21 42 53 7e |l)N.."......!BS~|
000000f0 e4 ba 79 39 e3 3e f8 d4 5a 37 86 54 4a 45 c4 cd |..y9.>..Z7.TJE..|
00000100 62 3b f5 57 25 b0 d8 f5 3b 2c a8 3c ac a8 e5 ce |b;.W%...;,.<....|
00000110 eb 3c 8e 0f 1c 0d 00 bd 83 62 d0 1f b9 af 19 b3 |.<.......b......|
00000120 ad d8 a5 2c 55 ff 00 f6 22 43 44 79 69 08 04 94 |...,U..."CDyi...|
00000130 76 c1 5e 48 1f 3a 45 b3 1e 35 2e f7 f1 52 45 36 |v.^H.:E..5...RE6|
00000140 0c 56 c4 58 f1 fc a4 36 d9 da 54 5a 5a 88 e3 93 |.V.X...6..TZZ...|
00000150 93 8c 81 f1 a3 55 59 30 4d 62 55 56 3d 42 bd 09 |.....UY0MbUV=B..|
00000160 e9 4e a5 f7 e3 45 94 50 d3 8b 48 00 12 9c 7b 24 |.N...E.P..H...{$|
00000170 67 df 4d d0 2c 88 54 4a a4 9a 9c 69 55 f7 9f 90 |g.M.,.TJ...iU...|
00000180 77 3c 89 53 0b 88 75 58 c0 52 93 df 03 a6 80 5f |w<.S..uX.R....._|
00000190 c2 9b 72 dc bb fc 22 8a fd 56 2c 79 f2 ea 69 59 |..r..."..V,y..iY|
000001a0 9b 25 c0 14 f0 7b 71 e3 77 54 ed c0 c0 1d 00 1a |.%...{q.wT......|
000001b0 0a aa ac d4 bf 86 a9 82 b1 1c ce 7e 9b 3d 50 a2 |...........~.=P.|
000001c0 3e e9 dc b2 84 be 10 16 14 79 1c 64 64 1e 83 5a |>........y.dd..Z|
000001d0 c3 7e 1c 51 92 66 bb 4a 97 58 a6 47 98 a5 39 26 |.~.Q.f.J.X.G..9&|
000001e0 1c 29 4a 65 97 14 47 27 6f 3b 73 df 1a 93 5c b2 |.)Je..G'o;s...\.|
000001f0 69 15 bb 7a 0d 15 e6 aa 10 29 71 78 44 68 2f 16 |i..z.....)qxDh/.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ADDITIONAL INFORMATION :
=================== log of boot-info 2014-12-18__10h58 ===================
boot-info version : 4ppa24
boot-sav version : 4ppa24
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa24
boot-info is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=10011f25-209b-4982-9f48-6e40abc7234f ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="10011f25-209b-4982-9f48-6e40abc7234f" TYPE="ext4"
/dev/sda5: UUID="59ecaa4e-cb64-4ff2-a38c-d35526ace1e2" TYPE="swap"
/dev/sdc1: LABEL="Elements" UUID="FCEE9D38EE9CEBE0" TYPE="ntfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 jui 23 00:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/ubuntu/Elements.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-22R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 997GB 997GB primary ext4 boot
2 997GB 1000GB 3687MB extended
5 997GB 1000GB 3687MB logical linux-swap(v1)
Model: WD Ext HDD 1021 (scsi)
Disk /dev/sdc: 3001GB
Sector size (logical/physical): 4096B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 3001GB 3001GB primary
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-22R;
1:1049kB:997GB:997GB:ext4::boot;
2:997GB:1000GB:3687MB:::;
5:997GB:1000GB:3687MB:linux-swap(v1)::;
BYT;
/dev/sdc:3001GB:scsi:4096:4096:msdos:WD Ext HDD 1021;
1:1049kB:3001GB:3001GB:::;
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sdc1 on /media/ubuntu/Elements type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 10 01 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 01 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 10 aa 2b 00 00 00 00 |...........+....|
00000030 00 00 0c 00 00 00 00 00 7f 08 d5 15 00 00 00 00 |................|
00000040 01 00 00 00 01 00 00 00 e0 eb 9c ee 38 9d ee fc |............8...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 914G 4.5G 863G 1% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.3M 331M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 156K 1.7G 1% /run/shm
none tmpfs 100M 40K 100M 1% /run/user
/dev/sdc1 fuseblk 2.8T 2.1T 743G 74% /media/ubuntu/Elements
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0002d72d
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1946320895 973159424 83 Linux
/dev/sda2 1946322942 1953523711 3600385 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 1946322944 1953523711 3600384 82 Linux swap / Solaris
Note: sector size is 4096 (not 512)
Disk /dev/sdc: 3000.6 GB, 3000590401536 bytes
255 heads, 63 sectors/track, 45600 cylinders, total 732566016 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0015b953
Device Boot Start End Blocks Id System
/dev/sdc1 256 732566015 2930263040 7 HPFS/NTFS/exFAT
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdc1.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (1000GB) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Comme c'est indiqué noir sur blanc dans cet extrait :
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
Il s'agit donc d'une installation réalisée en mode non-EFI (Legacy). Pour réussir à faire cette installation, je pense qu'il a fallu que tu changes le paramètre "Launch CSM" qui se trouvait sur "Never" dans cette photo de ton "Bios" issue du post #4 : http://pix.toile-libre.org/?img=1418799088.jpg
Tu peux confirmer et préciser sur quel choix se trouve le paramètre "Launch CSM" à présent ?
Dernière modification par malbo (Le 18/12/2014, à 12:16)
Hors ligne
#46 Le 18/12/2014, à 12:16
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Merci à tous pour vos précieux éclairages
C'est incroyable sous windows8 la machine était très lente
et là sous ubuntu elle va bien plus vite. C'est impressionnant la différence.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#47 Le 18/12/2014, à 12:18
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
souen,
J'ai complété mon post #45 en même temps que tu a posté, pourrais-tu répondre à mes questions ?
Hors ligne
#48 Le 18/12/2014, à 12:40
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Tu peux confirmer et préciser sur quel choix se trouve le paramètre "Launch CSM" à présent ?
launch CSM est à présent sous Always
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#49 Le 18/12/2014, à 12:51
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
launch CSM est à présent sous Always
Je suppose que ça veut dire que l'ordi est configuré pour fonctionner exclusivement en mode non-EFI, comme si c'était un ancien ordi avec un BIOS. Merci pour le complément d'info.
EDIT : C'est intéressant ce que tu as noté dans le post #46, à savoir que Ubuntu est plus rapide que Windows 8 préinstallé dans ce modèle Acer Aspire XC105
Dernière modification par malbo (Le 18/12/2014, à 13:00)
Hors ligne
#50 Le 18/12/2014, à 16:04
- moko138
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
EDIT : C'est intéressant ce que tu as noté dans le post #46, à savoir que Ubuntu est plus rapide que Windows 8 préinstallé dans ce modèle Acer Aspire XC105
Pour info, ayant eu à installer un Vista sur un HD neuf à l'aide la partition "PQSERVICE" d'Acer du disque d'origine mourant, j'ai pu constater qu'Acer injectait plusieurs utilitaires inutiles et ralentisseurs dans windows.
La tour Acer Aspire M5100 tournait beaucoup mieux après nettoyage de ces *wares.
Mais bon, cette PQSERVICE datait de 2008 environ, et Acer s'est certainement corrigé depuis...
Dernière modification par moko138 (Le 18/12/2014, à 16:06)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne