#1 Le 17/12/2014, à 17:33
- soujaa
[RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Salut ubunteros!
J'ai un Gateway model SX2185 avec uefi. Je me suis fait le plaisir de totalement supprimer Wiwdows 8. Jỳ ai installer Kubuntu 14.04, tout fonctionne à merveille sauf le démarrage. Au premier démarrage l'ordi signal qu'il n'y as de disque pour booter, j’éteins et rallume et à la seconde tentative kubuntu démarre C'est chaque fois la même chose....
Malgré l'installation de boot repair rien n'a encore changé.
Voici mon boot-info
Merci a tous pour votre aide.
Boot-info
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 969,568,255 968,517,632 Data partition (Linux)
/dev/sda3 969,568,256 976,771,071 7,202,816 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 77F1-D228 vfat
/dev/sda2 879080a7-06eb-436f-9e54-c616cda7eca2 ext4
/dev/sda3 af8223a5-ae69-4af8-a0bf-e69e92145060 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 17 07:48 ata-PIONEER_DVD-RW_DVR-220RS_MFQC323955WL -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 17 10:09 ata-ST500DM002-1BD142_S2AHRAZ8 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 17 07:48 ata-ST500DM002-1BD142_S2AHRAZ8-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 17 07:48 ata-ST500DM002-1BD142_S2AHRAZ8-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 17 07:48 ata-ST500DM002-1BD142_S2AHRAZ8-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Dec 17 10:09 wwn-0x5000c50062014f5e -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 17 07:48 wwn-0x5000c50062014f5e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 17 07:48 wwn-0x5000c50062014f5e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 17 07:48 wwn-0x5000c50062014f5e-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CA
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-43-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
menuentry 'Ubuntu, with Linux 3.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-41-generic ...'
linux /boot/vmlinuz-3.13.0-41-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-41-generic ...'
linux /boot/vmlinuz-3.13.0-41-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 77F1-D228
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=879080a7-06eb-436f-9e54-c616cda7eca2 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=77F1-D228 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=af8223a5-ae69-4af8-a0bf-e69e92145060 none swap sw 0 0
UUID=77F1-D228 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
====================== sda2/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
============== sda2: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-12-17__10h09 ===================
boot-repair version : 4ppa22
boot-sav version : 4ppa22
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa22
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="77F1-D228" TYPE="vfat"
/dev/sda2: UUID="879080a7-06eb-436f-9e54-c616cda7eca2" TYPE="ext4"
/dev/sda3: UUID="af8223a5-ae69-4af8-a0bf-e69e92145060" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc 14 18:32 grub.d
drwxr-xr-x 2 root root 4096 déc 11 02:17 grub.d.bak
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 170 déc 14 18:32 25_custom
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=77F1-D228 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST500DM002-1BD14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 496GB 496GB ext4
3 496GB 500GB 3688MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:496GB:496GB:ext4::;
3:496GB:500GB:3688MB:linux-swap(v1)::;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls /boot/efi/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 28 d2 f1 77 4e 4f 20 4e 41 4d 45 20 20 |..)(..wNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 455G 195G 238G 46% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.4M 331M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 148K 1.7G 1% /run/shm
none tmpfs 100M 20K 100M 1% /run/user
/dev/sda1 vfat 511M 3.8M 508M 1% /boot/efi
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x07c0868e
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par soujaa (Le 19/12/2014, à 18:42)
Hors ligne
#2 Le 17/12/2014, à 18:17
- kalunux
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonjour,
Peux-tu ouvrir ta partition sda1 via ton gestionnaire de fichiers et copier/coller cette commande dans un terminal :
lsblk
Puis, copie/colle le retour.
Hors ligne
#3 Le 17/12/2014, à 18:22
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Depuis une session de ton Kubuntu installé, pourrais-tu passer la commande suivante :
sudo efibootmgr -v
puis le commande :
sudo grub-install
et enfin (pour comparer avec le résultat de la première commande) :
sudo efibootmgr -v
Je te prie de coller tout ce qui s'affiche dans le terminal (colle le pavé complet) dans ta réponse pour qu'on puisse bien voir les commandes passées et leur résultat.
Hors ligne
#4 Le 17/12/2014, à 18:47
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
J'ai suivie les instructions de Malbo.
j'obtien
assoua@assoua-SX2185:~$ sudo efibootmgr -v
[sudo] password for assoua:
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
assoua@assoua-SX2185:~$ sudo grub-install
Installing for x86_64-efi platform.
Installation terminée, sans erreur.
assoua@assoua-SX2185:~$ sudo efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0002,0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
Boot0002* ubuntu HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)File(\EFI\ubuntu\shimx64.efi)
assoua@assoua-SX2185:~$
Hors ligne
#5 Le 17/12/2014, à 18:59
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
OK, le résultat de la dernière commande indique que le démarrage par défaut de ton ordi devrait se faire sur l'entrée "Boot0002* ubuntu" qui a été créée dans ton système UEFI. Vérifie si tes symptômes au démarrage sont toujours là.
Hors ligne
#6 Le 17/12/2014, à 19:05
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
J'ai vérifié et rien n'a changé .....Toujours un echec de demarrage sur deux
a kalunux
Comment ouvrir sda1?
assoua@assoua-SX2185:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465,8G 0 disk
├─sda1 8:1 0 512M 0 part /boot/efi
├─sda2 8:2 0 461,8G 0 part /
└─sda3 8:3 0 3,4G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
assoua@assoua-SX2185:~$ ^C
Ok kalunux j'ai ouvert dev/sda1 avec dolphin taper la commade lsbik
assoua@assoua-SX2185:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465,8G 0 disk
├─sda1 8:1 0 512M 0 part /boot/efi
├─sda2 8:2 0 461,8G 0 part /
└─sda3 8:3 0 3,4G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
assoua@assoua-SX2185:~$
Dernière modification par soujaa (Le 17/12/2014, à 19:19)
Hors ligne
#7 Le 17/12/2014, à 19:34
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Au démarrage de l'ordi, tu appuies sur la touche E quand tu vois le menu Grub afin d'éditer le choix sélectionné par défaut (l'entrée "ubuntu"),
tu navigues avec les flèches jusqu’à la ligne "gfxmode $linux_gfx_mode" et tu supprimes cette ligne puis tu valides ça par la touche F10. Vérifie si avec cette procédure - lourdingue mais c'est pour investiguer le pb, ce ne sera pas à faire à chaque fois - tu n'as plus la problème d'échec au premier démarrage. Je te propose ça parce que j'ai déjà vu le cas ici : http://forum.ubuntu-fr.org/viewtopic.php?id=1076111
Dernière modification par malbo (Le 17/12/2014, à 19:36)
Hors ligne
#8 Le 17/12/2014, à 20:04
- kalunux
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
@soujaa
Suit les instructions de Malbo.
Dernière modification par kalunux (Le 17/12/2014, à 20:05)
Hors ligne
#9 Le 18/12/2014, à 06:30
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Salut Salut
J'ai bien supprimé la ligne "gfxmode \$linux_gfx_mode". Mais, désolé c'est toujours le même problème...
sudo kate /etc/grub.d/10_linux
donne
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${datarootdir}/grub/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
|| ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
|| uses_abstraction "${GRUB_DEVICE}" lvm; then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs}"
;;
esac
title_correction_code=
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "$ubuntu_recovery" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY nomodeset"
fi
if [ "$vt_handoff" = 1 ]; then
for word in $GRUB_CMDLINE_LINUX_DEFAULT; do
if [ "$word" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff"
fi
done
fi
linux_entry ()
{
os="$1"
version="$2"
type="$3"
args="$4"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
case $type in
recovery)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")" ;;
*)
title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")" ;;
esac
if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ "$quick_boot" = 1 ]; then
echo " recordfail" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
else
if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
fi
fi
if ([ "$ubuntu_recovery" = 0 ] || [ x$type != xrecovery ]) && \
([ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 1 ]); then
echo " " | sed "s/^/$submenu_indentation/"
fi
echo " insmod gzio" | sed "s/^/$submenu_indentation/"
if [ x$dirname = x/ ]; then
if [ -z "${prepare_root_cache}" ]; then
prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
fi
printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
else
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
fi
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
if test -d /sys/firmware/efi && test -e "${linux}.efi.signed"; then
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename}.efi.signed root=${linux_root_device_thisversion} ro ${args}
EOF
else
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
fi
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading initial ramdisk ...")"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
initrd ${rel_dirname}/${initrd}
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
machine=`uname -m`
case "x$machine" in
xi?86 | xx86_64)
list=`for i in /boot/vmlinuz-* /vmlinuz-* /boot/kernel-* ; do
if grub_file_is_not_garbage "$i" ; then echo -n "$i " ; fi
done` ;;
*)
list=`for i in /boot/vmlinuz-* /boot/vmlinux-* /vmlinuz-* /vmlinux-* /boot/kernel-* ; do
if grub_file_is_not_garbage "$i" ; then echo -n "$i " ; fi
done` ;;
esac
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "$vt_handoff" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 0 ]; then
echo "set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
case $linux in
*.efi.signed)
# We handle these in linux_entry.
list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
continue
;;
esac
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${dirname}/${i}" ; then
initrd="$i"
break
fi
done
config=
for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${i}" ; then
config="${i}"
break
fi
done
initramfs=
if test -n "${config}" ; then
initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
fi
if test -n "${initrd}" ; then
gettext_printf "Found initrd image: %s\n" "${dirname}/${initrd}" >&2
elif test -z "${initramfs}" ; then
# "UUID=" and "ZFS=" magic is parsed by initrd or initramfs. Since there's
# no initrd or builtin initramfs, it can't work here.
linux_root_device_thisversion=${GRUB_DEVICE}
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS}" "${version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
submenu_indentation="$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" recovery \
"${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
Hors ligne
#10 Le 18/12/2014, à 08:04
- ikewdu
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Salut,
Ca ressemble pas mal au problème de souen ici (à la différence que la chose semble se produire une fois sur 2).
http://forum.ubuntu-fr.org/viewtopic.ph … #p18783141
L'entrée Ubuntu disparaît du démarrage, et WBM est remis en place :
efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
Perso, je penche toujours pour un blocage inhérent au bios ("fast boot" ou autre cochonnerie active ou inactive)... Bizarrement, ces bios semblent chercher leurs entrées de boot ailleurs que dans la partition EFI.
Le test de démarrage avec SGD2 permettrait de confirmer que la situation est similaire.
Hors ligne
#11 Le 18/12/2014, à 08:17
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Pourrais-tu passer la commande :
sudo update-grub
Puis refaire un Boot-Info depuis ta session de Kubuntu installé et donner l'URL du Boot-Info dans ta réponse.
D'autre part, tu as écrit dans le post #1 : "Au premier démarrage l'ordi signale qu'il n'y as de disque pour booter". Pourrais-tu noter sur un bout de papier le contenu complet du message qui s'affiche et le donner dans ta réponse ?
Dernière modification par malbo (Le 18/12/2014, à 08:20)
Hors ligne
#12 Le 18/12/2014, à 15:54
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Salut et merci pour les efforts que vous faites.
Dans le bios j'ai mis launch CSM sous Always. Secure boot et quiet boot sont sur disable.
Au demarrage c'est ecrit;
Reboot and Select proper Boot Device or Insert Boot Media in select device and press a key
assoua@assoua-SX2185:~$ sudo update-grub
[sudo] password for assoua:
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-3.13.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-41-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-41-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic
Adding boot menu entry for EFI firmware configuration
fait
assoua@assoua-SX2185:~$
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 969,568,255 968,517,632 Data partition (Linux)
/dev/sda3 969,568,256 976,771,071 7,202,816 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 77F1-D228 vfat
/dev/sda2 879080a7-06eb-436f-9e54-c616cda7eca2 ext4
/dev/sda3 af8223a5-ae69-4af8-a0bf-e69e92145060 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 18 08:38 ata-PIONEER_DVD-RW_DVR-220RS_MFQC323955WL -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 18 08:51 ata-ST500DM002-1BD142_S2AHRAZ8 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 18 08:38 ata-ST500DM002-1BD142_S2AHRAZ8-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 18 08:38 ata-ST500DM002-1BD142_S2AHRAZ8-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 18 08:38 ata-ST500DM002-1BD142_S2AHRAZ8-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Dec 18 08:51 wwn-0x5000c50062014f5e -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 18 08:38 wwn-0x5000c50062014f5e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 18 08:38 wwn-0x5000c50062014f5e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 18 08:38 wwn-0x5000c50062014f5e-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CA
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-43-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
menuentry 'Ubuntu, with Linux 3.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-41-generic ...'
linux /boot/vmlinuz-3.13.0-41-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-41-generic ...'
linux /boot/vmlinuz-3.13.0-41-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-879080a7-06eb-436f-9e54-c616cda7eca2' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 879080a7-06eb-436f-9e54-c616cda7eca2
else
search --no-floppy --fs-uuid --set=root 879080a7-06eb-436f-9e54-c616cda7eca2
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 77F1-D228
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=879080a7-06eb-436f-9e54-c616cda7eca2 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=77F1-D228 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=af8223a5-ae69-4af8-a0bf-e69e92145060 none swap sw 0 0
UUID=77F1-D228 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
====================== sda2/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
============== sda2: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-12-18__08h51 ===================
boot-repair version : 4ppa22
boot-sav version : 4ppa22
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa22
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=879080a7-06eb-436f-9e54-c616cda7eca2 ro quiet splash
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="77F1-D228" TYPE="vfat"
/dev/sda2: UUID="879080a7-06eb-436f-9e54-c616cda7eca2" TYPE="ext4"
/dev/sda3: UUID="af8223a5-ae69-4af8-a0bf-e69e92145060" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc 18 08:49 grub.d
drwxr-xr-x 2 root root 4096 déc 11 02:17 grub.d.bak
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11584 déc 17 23:12 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 170 déc 18 08:49 25_custom
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=77F1-D228 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0002,0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
Boot0002* ubuntu HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)File(EFIubuntushimx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST500DM002-1BD14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 496GB 496GB ext4
3 496GB 500GB 3688MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:496GB:496GB:ext4::;
3:496GB:500GB:3688MB:linux-swap(v1)::;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls /boot/efi/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 28 d2 f1 77 4e 4f 20 4e 41 4d 45 20 20 |..)(..wNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 455G 194G 238G 45% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.4M 331M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 148K 1.7G 1% /run/shm
none tmpfs 100M 20K 100M 1% /run/user
/dev/sda1 vfat 511M 3.8M 508M 1% /boot/efi
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x07c0868e
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par soujaa (Le 18/12/2014, à 17:24)
Hors ligne
#13 Le 18/12/2014, à 17:36
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Dans ce dernier Boot-Info, on peut voir que tu as toujours une entrée pour Ubuntu dans ton UEFI :
efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0002,0001,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* UEFI: ST500DM002-1BD142 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)..BO
Boot0002* ubuntu HD(1,800,100000,51433955-6c1f-4c1c-98da-b7ba77cd1ea1)File(EFIubuntushimx64.efi)
Le démarrage par défaut devrait se faire sur l'entrée "Boot0002* ubuntu" conformément à la ligne "BootOrder: 0002,0001,0000" mais comme le démarrage de ton ordi doit être bridé, ça démarre sur l'entrée "Boot0001* UEFI" comme en atteste la ligne "BootCurrent: 0001", c'est à dire que ça démarre systématiquement sur le fichier /EFI/Boot/bootx64.efi. Moi, je ne sais pas trop ce qu'il y a dans ce fichier bootx64.efi mais tout ce que je sais c'est qu'il parvient à lancer ton Ubuntu.
EDIT : pourrais-tu vérifier que si tu presses la touche F12 au démarrage(*) et que tu la maintiens pressée, tu arrives au "Boot Menu", c'est à dire que tu peux voir un menu qui te propose :
ubuntu
UEFI: ST500DM002
Windows Boot Manager
Si oui, je te prie de sélectionner "ubuntu" et dire si tu parviens bien à démarrer Ubuntu par ce chemin.
(*) j'ai vu dans ce lien que c'était possible d'utiliser cette touche F12 dans ton modèle Gateway SX2185 (même si ce n'est peut-être pas exactement le même modèle que le tien)
Dernière modification par malbo (Le 18/12/2014, à 17:43)
Hors ligne
#14 Le 18/12/2014, à 18:01
- maxire
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonjour à tous,
@soujaa: remets CSM à sa valeur initiale sinon tu ne pourras jamais démarrer, CSM=Always démarre le PC en mode BIOS
@malbo: je pense que tu as raison c'est l'entrée Boot0001 qui semble casser la baraque.
Peut-être qu'en la supprimant?
Mais j'ai peur que le PC ne démarre plus du tout.
Une solution serait de convertir l'installation en mode Legacy.
Edit: Ce serait une bonne chose de supprimer les reliquats de Windows dans /boot/efi même si ce n'est pas vraiment le problème
Dernière modification par maxire (Le 18/12/2014, à 18:03)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#15 Le 18/12/2014, à 18:31
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
@maxire
Je remets fissa le CSM en NEVER!!!!!!!!
Hors ligne
#16 Le 18/12/2014, à 18:41
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
@maxire : merci pour ton intervention, je n'avais pas lu le début du post #12 ("Dans le bios j'ai mis launch CSM sous Always")
@soujaa : le paramètre "launch CSM" étant remis sur "Never" dans le "Bios", peux-tu répondre à ma question dans EDIT du post #13 ?
Hors ligne
#17 Le 19/12/2014, à 07:41
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonsoir,
@malbo
Quand j’appuie sur F12 au démarrage il n'y que la ligne UEFI: ST500DM002-1BD142 qui s'affiche. Il n'y a pas UBUNTU ni WINDOWS Boot Manager.
Mais quand je valide UEFI: ST500DM002 alors le grub ubuntu apparait.
Hors ligne
#18 Le 19/12/2014, à 09:02
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonjour,
Depuis une session de ton Ubuntu installé sur disque dur, je te prie de passer les commandes suivantes (valide chaque commande par la touche Entrée. Utilise le copier-coller, ça t'évitera les erreurs de frappe):
md5sum /boot/efi/EFI/Boot/bootx64.efi
md5sum /boot/efi/EFI/ubuntu/grubx64.efi
md5sum /boot/efi/EFI/ubuntu/shimx64.efi
Quand ce sera fait, colle tout ce qui est affiché dans le terminal (les trois commandes et leur résultat) dans ta réponse.
Dernière modification par malbo (Le 19/12/2014, à 09:07)
Hors ligne
#19 Le 19/12/2014, à 14:41
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonmatin,
Voila c'est fait..
assoua@assoua-SX2185:~$ md5sum /boot/efi/EFI/Boot/bootx64.efi
a0bf8dc68542845b413328a9d8567e76 /boot/efi/EFI/Boot/bootx64.efi
assoua@assoua-SX2185:~$ md5sum /boot/efi/EFI/ubuntu/grubx64.efi
2f2f42eb2229f935ed0aed0fdfc7acb0 /boot/efi/EFI/ubuntu/grubx64.efi
assoua@assoua-SX2185:~$ md5sum /boot/efi/EFI/ubuntu/shimx64.efi
7095619324a9fb786422d7427c056405 /boot/efi/EFI/ubuntu/shimx64.efi
assoua@assoua-SX2185:~$
Hors ligne
#20 Le 19/12/2014, à 14:47
- maxire
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonjour,
En plus:
md5sum /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Je pense que cela pourrait être intéressant.
Lorsque tu écris «grub ubuntu apparaît», est-ce le menu, un prompt grub ou un prompt grub-rescue?
Dernière modification par maxire (Le 19/12/2014, à 14:47)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#21 Le 19/12/2014, à 15:03
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
assoua@assoua-SX2185:~$ md5sum /boot/efi/EFI/Microsoft/Boot/bootx64.efi
a0bf8dc68542845b413328a9d8567e76 /boot/efi/EFI/Microsoft/Boot/bootx64.efi
assoua@assoua-SX2185:~$ ^C
assoua@assoua-SX2185:~$
Lorsque tu écris «grub ubuntu apparaît», est-ce le menu, un prompt grub ou un prompt grub-rescue?
C'est le menu qui qpparait
Dernière modification par soujaa (Le 19/12/2014, à 15:14)
Hors ligne
#22 Le 19/12/2014, à 15:30
- maxire
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
soua@assoua-SX2185:~$ md5sum /boot/efi/EFI/Microsoft/Boot/bootx64.efi
a0bf8dc68542845b413328a9d8567e76 /boot/efi/EFI/Microsoft/Boot/bootx64.efi
et :
assoua@assoua-SX2185:~$ md5sum /boot/efi/EFI/Boot/bootx64.efi
a0bf8dc68542845b413328a9d8567e76 /boot/efi/EFI/Boot/bootx64.efi
donnent la même valeur de clé donc ce sont des fichiers identiques censés lancer le boot manager windows.
C'est le menu grub qui s'affiche lors de la sélection de «UEFI: ST500DM002-1BD142» via le menu F12, je ne comprends pas très bien pourquoi si cette option correspond bien au lancement d'un périphérique censé utiliser bootx64.efi.
Mystère...
Attendons de savoir ce qu'en pense Malbo.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#23 Le 19/12/2014, à 15:35
- kalunux
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Bonjour,
Supprime ce répertoire "Microsoft" via cette commande :
sudo rm -r /boot/efi/EFI/Microsoft
Puis l'entrée EFI via cette commande :
sudo efibootmgr -b 0000 -B
Dernière modification par kalunux (Le 19/12/2014, à 15:39)
Hors ligne
#24 Le 19/12/2014, à 15:36
- soujaa
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
Yes mystère et boule de gomme. je croise les doigts pour que se probleme soit reglé
Hors ligne
#25 Le 19/12/2014, à 16:17
- malbo
Re : [RÉSOLU] Ordinateur Uefi demarre une fois sur deux!!!
@soujaa : je ne vois pas du tout l'intérêt des commandes proposées par kalunux pour résoudre ton problème mais comme je ne maîtrise pas le fonctionnement de ton UEFI, il est possible que kalunux ait trouvé l'épine qui est dans ton pied. Passe les commandes qu'il propose, on verra bien.
Hors ligne