#1 Le 10/01/2015, à 08:25
- ludo77
probleme partition frontière de cylindre physique
bonjour,
j'ai fais un fdisk -l sur mon disque dur:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x4d13e956
Périphérique Amorçage Début Fin Blocs Id. Système
/dev/sda1 1 1953525167 976762583+ ee GPT
La partition 1 ne commence pas sur une frontière de cylindre physique.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
et par contre gsmartcontrol me retourne:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-44-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10JPVX-80JC3T0
Serial Number: WD-WXW1E54TSEM3
LU WWN Device Id: 5 0014ee 65a1bdffb
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jan 10 07:14:02 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18720) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 209) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 180 179 021 Pre-fail Always - 2000
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 209
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 526
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 207
191 G-Sense_Error_Rate 0x0032 092 092 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 860
194 Temperature_Celsius 0x0022 112 100 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 462 -
# 2 Short offline Completed without error 00% 458 -
# 3 Short offline Completed without error 00% 438 -
# 4 Conveyance offline Completed without error 00% 433 -
# 5 Conveyance offline Completed without error 00% 432 -
# 6 Extended offline Completed without error 00% 256 -
# 7 Conveyance offline Completed without error 00% 250 -
# 8 Conveyance offline Completed without error 00% 239 -
# 9 Short offline Completed without error 00% 239 -
#10 Extended offline Completed without error 00% 168 -
#11 Conveyance offline Completed without error 00% 164 -
#12 Short offline Completed without error 00% 152 -
#13 Extended offline Aborted by host 80% 79 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
et j'ai un probleme aussi avec la valeur 191 G-Sense_Error_Rate 0x0032 092 092 000 Old_age Always - 8
merci de votre aide.
Hors ligne
#2 Le 10/01/2015, à 08:29
- ludo77
Re : probleme partition frontière de cylindre physique
j'ai vu qu'il y avais un outil gdisk pour les partition GPT , je vais regarder si je trouve un tuto.
et donc mon probleme de frontiere de cylindre physique proviendrait peu etre de la
Hors ligne
#3 Le 10/01/2015, à 08:32
- malbo
Re : probleme partition frontière de cylindre physique
Ce que tu peux lire "La partition 1 ne commence pas sur une frontière de cylindre physique." n'a aucune importance. Et les résultats de gsmartcontrol sont excellents. Les seules lignes à regarder sont celle-ci :
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
et celle-là :
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
Ces deux lignes montrent que tu n'as aucune erreur et que ton disque dur pète la santé. Ce qui ne veut pas dire que quand ce n'est pas égal à zéro, il faut jeter le disque dur : le jour où ce ne sera plus zéro, il faudra surveiller l'évolution mais moi je vis avec plus de 2000 "Reallocated_Sector_Ct" sur un disque dur et je surveille...
Dernière modification par malbo (Le 10/01/2015, à 08:40)
Hors ligne
#4 Le 10/01/2015, à 08:40
- ludo77
Re : probleme partition frontière de cylindre physique
j'ai effectué un
sudo gdisk /dev/sda
puis p:
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 0675ED1A-08DE-4F35-9E15-4664FEF546B0
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 3652 sectors (1.8 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 206847 100.0 MiB EF00 EFI system partition
2 206848 2050047 900.0 MiB 2700 Basic data partition
3 2050048 2312191 128.0 MiB 0C01 Microsoft reserved part
4 2312192 268550143 127.0 GiB 0700 Basic data partition
5 783718400 1911560191 537.8 GiB 0700 Basic data partition
6 1911560192 1953523711 20.0 GiB 2700 Basic data partition
7 268550144 767231784 237.8 GiB 8300
8 767232000 783718399 7.9 GiB 8200
puis j'ai fais v
No problems found. 3652 free sectors (1.8 MiB) available in 3
segments, the largest of which is 2014 (1007.0 KiB) in size.
je pense que le probleme est resolu
Dernière modification par ludo77 (Le 10/01/2015, à 08:45)
Hors ligne
#5 Le 10/01/2015, à 08:42
- malbo
Re : probleme partition frontière de cylindre physique
Regarde mon post #3 et arrête de te faire peur : ton disque est en pleine forme.
Hors ligne
#6 Le 10/01/2015, à 08:59
- ludo77
Re : probleme partition frontière de cylindre physique
desolé je n'avais pas vu ton post #3
merci pour ces renseignements
Hors ligne