#1 Le 20/01/2015, à 14:32
- ngmsky
EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour,
------ Résumé des problèmes : --------
- Problème 1 : Temps de démarrage du pc (de l'allumage jusqu'à l’écran de connexion/ouverture session graphique) est trop lent (1 à minutes)
- Problème 2 : [Résolu] Plus de connexion sans fil (mais connexion filaire OK). Aucun réseau wifi n'est listé.
- Problème 3 : : Avant l'ouverture d'une session graphique, il faut attendre environ 60 secondes pour que les périphériques usb (clavier, souris, etc) soient fonctionnels.
- Problème 4 : Le temps de chargement de la session graphique est anormalement lent.
Les 4 étapes de démarrage et leurs temps d'attentes (approximatifs) :
- Problème 1 :
etp1/ de l’appuie sur le bouton jusqu'au menu (grub) du choix du systeme : 33 secondes
etp2/ du choix du système (Ubuntu), jusqu'à l'interface d'ouverture session graphique (lightdm) : 32 secondes
- Problème 3 :
etp3/ temps d'attente que les périphériques usb (clavier et souris) se débloquent : 60 secondes
- Problème 4 :
etp4/ (après la saisie du mot de passe), temps d'attente pour que la session graphique demarre complètement (affichage du Bureau gnome, les icones, et le tableau de bord) : 25 secondes
D'ou un total d'environ : 150 secondes (2 minutes et 30 secondes) d'attente à chaque démarrage du pc.
----- Détail des problèmes -----------
- Problème 1 :
> probleme :
Le temps de démarrage du pc (de l'allumage jusqu'à l’écran de connexion/ouverture session graphique) est trop lent (1 minute) c'est catastrophique Pour un PC puissant, sous ubuntu en plus. Mais n'ai jamais pris le temps de corriger depuis l'installation d'ubuntu).
NB : les étapes inutiles du démarrage sont bien désactivés depuis le bios)
Il s'agit des etages : etp1/ et etp2/
> cause : inconnue.
- Problème 2 :
NB : Ce problème 2 est maintenant Résolu. Je ne sais pas comment mais les reseaux wifi et filaire sont à nouveau fonctionnels :
Il ne reste plus que les problemes 1, 3 et 4 à corriger.
> probleme : Je n'ai plus de connexion sans fil (connexion filaire OK) mais plus de wifi. Aucun réseau n'est listé.
> Cause :
Ce probleme a commencé lorsque j'ai essayé de résoudre un probleme que j'avais avec l'indicateur de réseau (qui était devenu instable) qui s'affiche dans la barre des indicateurs (en haut à droite). cad, lr systeme n'arrretait pas de me déconnéter du reseau filaire pour éssayer de se connecté en wifi. Et comme la connexion wifi ne marche pas (signal faible ou autre raison ?) je me trouvais sans connexion. Il fallait manullement reselectionné la reseau filaire (dans lindicateur reseau) pour avoir internet. Mais 1-2 minutes après, il se déconnecte pour éssayer de me reconnecté par le wifi, qui ne marchera toujours pas, et donc ça me fesait perdre du temps.
C'est comme-ci le wifi était le choix par defaut. Mais ne sachant pas trop comment inverser cet ordre de connexion, j'ai pensé qu'une suppression complet + reinstallation de l'indicateur de reseau devrait resoudre le probleme.
> Tentative de résolution :
J'ai donc fait :
sudo aptitude purge network-manager-gnomepuis
sudo aptitude install network-manager-gnomeEt c'est apprès le redémarrage du pc que je me rends compte qu'il y'a un nouveau probleme qui vient de se créer ( probleme 3), sachant que le probleme reseau n'a pas été resolu par la précedente commande.
J'ai la connexion filaire stable. Mais Je n'ai plus de connexion wifi. Aucun réseau n'est listé. C'est comme-ci mes 2 cartes wifi ne sont plus reconnues tout simplement.
la commande nm-applet n'est même plus reconnu (alors qu'avant, il me permettait de faire apparaitre un autre indicateur reseau, et affichait bien les reseau wifi).
A ce stade je me retouve donc avec :
> le probleme 1 (lenteur de démarrage) depuis l'installation d'ubuntu
> le probleme 2 ( plus de connexion /reconnaissance wifi) : probleme pas trop urgent, car j'ai internet par le filaire.
> puis le probleme 3, causé par la tentaive de résolution du problème 2.
- Problème 3 :
> problème :
Arrivé au niveau de l'authentification (lightdm), il faut attendre environ 60 secondes pour que les périphériques usb (clavier, souris, etc) soient fonctionnels.
J'aimerai pouvoir saisir mon mot de passe dès que l'ecran d’authentification est affiché, comme je le fesais d'habitude, jusqu'il y'a 2 jours.
Du coup, ça fait au total environ 2,5 minutes d'attente pour chaque démarrage du PC. c'est catastrophique.
NB : une fois, le pc démarré, le clavier et la souris fonctionne très bien. donc c'est juste au niveau du démarrage que ça bloque.
> Cause : tentative résolution du probleme 2.
- Problème 4 :
> probleme : Le temps de chargement de la session graphique est anormalement lent.
Après la saisie du mot de passe (authentification, il faut attendre 25 secondes pour que la session graphique se charge complètement (affichage du Bureau gnome, les icones, et le tableau de bord).
> Cause : inconnue
-------------------- Fin de détail des problèmes ------------------------
Pour l'instant, je veux surtout corriger le 3eme probleme, celui des périphériques USB.
Mais si vous pensez qu'on peut tout corriger à la fois, ça m'arrangerait aussi.
------ Configuration -------
Systeme : ubuntu 14.04 64bits
NB : J'utilise :
- ligthdm comme gestionnaire de connexion/session
- Gnome flashback (Compiz) au lieu de Unity
NB : pour le passage de Unity à Gnome, j'ai suivi ce qui est dit ici www.le-libriste.fr/ubuntu/faq/comment-virer-unity-et-le-remplacer/
Et Gnome fonctionnait très très bien (sans Unity)
Materiel :
- processeur : intel i7-960 (8 cores) 3.20 Gzh
- Carte mere : Saphire pure black X58-ICH10R (chipset)
- RAM : 8 GB DDR3 - 1600Mhz
- Disque dure : 2 To - 32Mo de mémoire cache - Sata 3.0
Je suis disponible pour vous donner plus de précisions et/ou des rapport sur des commandes.
Merci d'avance pour votre aide.
A bientôt
Dernière modification par ngmsky (Le 29/01/2015, à 14:37)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#2 Le 21/01/2015, à 00:27
- le cinglé_001
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour
.
Sache qu'avec une installation mimi et des logiciels que je veux je démarre en moins de 6 secondes sur un intel de 2007.
Pour le problème de connexion, ou as-tu précisé la marque et le modèle pour que l'on puisse t'aider.
Tu gueules mais il n'y a aucun log. En gros tu t'es craché mais on n'a pas accès aux boites noires.
#3 Le 21/01/2015, à 22:26
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour the_boss_oo1.
Meci pour ta contribution.
the_boss_oo1 a écrit :
Sache qu'avec une installation mimi et des logiciels que je veux je démarre en moins de 6 secondes sur un intel de 2007.
ça c'est super et ça prouve la puissance de linux.
the_boss_oo1 a écrit :
Pour le problème de connexion, ou as-tu précisé la marque et le modèle pour que l'on puisse t'aider.
Tu gueules mais il n'y a aucun log. En gros tu t'es craché mais on n'a pas accès aux boites noires.
Voici ce que j'avais écrit à la fin :
ngmsky a écrit :
Je suis disponible pour vous donner plus de précisions et/ou des rapport sur des commandes.
En faite, ne sachant pas exactement les commandes qu'il fallait taper, et pour ne pas saturer le post inutilement, j'ai préférer vous laisser le soin de me proposer les commandes qui vous semble pertinentes et adaptées aux l'informations techniques que vous voulez avoir.
Pour finir, je ne vois pas où j'ai gueulé ?
peut-être parce que j'ai dit ceci ? :
... démarrage est trop lent (1 à 1,5 minutes) c'est catastrophique Pour un PC puissant, sous ubuntu en plus.
Si c'est ceque vous appelez gueuler, alors je vous présente toutes mes excuses. Ce n'était pas mon intention.
En passant, le probleme 2 (plus de connexion wifi) est résolu, tout simplement parce ça fonctionne à nouveau, tout seul, sans rien modifier.
Je suis donc à votre disposition pour vous donner toutes les sorties de commandes ou des fichiers logs qu'il faut.
Sincerement, je pouvais déja vous donner quelques sorties de commandes, mais je ne sais pas quelles commandes taper.
NB : Je suis un utilisateur plutôt interface graphique mais pas trop ligne de commandes. Mais ça ne me dérange de taper des commandes, donc je suis prêt.
Merci encore pour votre aide.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#4 Le 22/01/2015, à 05:32
- le cinglé_001
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour.
ngmsky a écrit :
Pour finir, je ne vois pas où j'ai gueulé ?
Oups je pensais avoir mis un smiley à la fin de ma phrase. C'était une plaisanterie. 
Que tu ne sois pas trop ligne de commandes ce n'est grave. Les lignes de commandes sont utilisées par les helpers parce que c'est plus simple que de dire clique là, là, etc.
Lorsque j'aidais sur Windows j'utilisais beaucoup l'invite de commande pour aider.
Bon reprenons.
Poste sous balises code le contenu des deux commandes suivantes.
gedit /var/log/kern.loget
gedit /var/log/syslogMerci.
#5 Le 22/01/2015, à 12:00
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour,
ok merci pour la précision et surtout pour ta disponibilité pour aider les autres.
Alors,
voici le sortie de : gedit /var/log/kern.log
Jan 20 16:36:18 jean8v32-pc kernel: [72838.022641] usb 1-4: new high-speed USB device number 6 using ehci-pci
Jan 20 16:36:18 jean8v32-pc kernel: [72838.160738] usb 1-4: New USB device found, idVendor=13fe, idProduct=3600
Jan 20 16:36:18 jean8v32-pc kernel: [72838.160743] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 20 16:36:18 jean8v32-pc kernel: [72838.160746] usb 1-4: Product: USB DISK 2.0
Jan 20 16:36:18 jean8v32-pc kernel: [72838.160749] usb 1-4: Manufacturer:
Jan 20 16:36:18 jean8v32-pc kernel: [72838.160752] usb 1-4: SerialNumber: 07A30102BBA17DD8
Jan 20 16:36:18 jean8v32-pc kernel: [72838.195950] usb-storage 1-4:1.0: USB Mass Storage device detected
Jan 20 16:36:18 jean8v32-pc kernel: [72838.196000] usb-storage 1-4:1.0: Quirks match for vid 13fe pid 3600: 4000
Jan 20 16:36:18 jean8v32-pc kernel: [72838.196026] scsi14 : usb-storage 1-4:1.0
Jan 20 16:36:18 jean8v32-pc kernel: [72838.196111] usbcore: registered new interface driver usb-storage
Jan 20 16:36:19 jean8v32-pc kernel: [72839.231345] scsi 14:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
Jan 20 16:36:19 jean8v32-pc kernel: [72839.231625] sd 14:0:0:0: Attached scsi generic sg3 type 0
Jan 20 16:36:20 jean8v32-pc kernel: [72840.250550] sd 14:0:0:0: [sdb] 15224832 512-byte logical blocks: (7.79 GB/7.25 GiB)
Jan 20 16:36:20 jean8v32-pc kernel: [72840.253288] sd 14:0:0:0: [sdb] Write Protect is off
Jan 20 16:36:20 jean8v32-pc kernel: [72840.253293] sd 14:0:0:0: [sdb] Mode Sense: 03 41 00 00
Jan 20 16:36:20 jean8v32-pc kernel: [72840.256046] sd 14:0:0:0: [sdb] No Caching mode page found
Jan 20 16:36:20 jean8v32-pc kernel: [72840.256050] sd 14:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 16:36:20 jean8v32-pc kernel: [72840.264323] sd 14:0:0:0: [sdb] No Caching mode page found
Jan 20 16:36:20 jean8v32-pc kernel: [72840.264327] sd 14:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 16:36:20 jean8v32-pc kernel: [72840.293313] sdb: sdb1
Jan 20 16:36:20 jean8v32-pc kernel: [72840.300791] sd 14:0:0:0: [sdb] No Caching mode page found
Jan 20 16:36:20 jean8v32-pc kernel: [72840.300796] sd 14:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 16:36:20 jean8v32-pc kernel: [72840.300801] sd 14:0:0:0: [sdb] Attached SCSI removable disk
Jan 20 16:36:22 jean8v32-pc kernel: [72842.370403] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jan 20 16:47:31 jean8v32-pc kernel: [73511.000039] ISO 9660 Extensions: Microsoft Joliet Level 3
Jan 20 16:47:31 jean8v32-pc kernel: [73511.000149] ISO 9660 Extensions: RRIP_1991A
Jan 20 16:55:31 jean8v32-pc kernel: [73991.474917] usb 3-2.2: USB disconnect, device number 6
Jan 20 16:57:12 jean8v32-pc kernel: [74092.808106] usb 3-2.2: new low-speed USB device number 7 using uhci_hcd
Jan 20 16:57:13 jean8v32-pc kernel: [74092.961046] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
Jan 20 16:57:13 jean8v32-pc kernel: [74092.961052] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 20 16:57:13 jean8v32-pc kernel: [74092.961055] usb 3-2.2: Product: Basic Optical Mouse
Jan 20 16:57:13 jean8v32-pc kernel: [74092.961058] usb 3-2.2: Manufacturer: Microsoft
Jan 20 16:57:13 jean8v32-pc kernel: [74092.989301] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input10
Jan 20 16:57:13 jean8v32-pc kernel: [74092.989475] hid-generic 0003:045E:0084.0006: input,hidraw3: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
Jan 20 17:00:46 jean8v32-pc kernel: [74306.729962] usb 3-2.2: USB disconnect, device number 7
Jan 20 18:18:56 jean8v32-pc kernel: [78996.439749] usb 1-4: USB disconnect, device number 6
Jan 20 18:19:53 jean8v32-pc kernel: [79052.668583] usb 3-2.2: new low-speed USB device number 8 using uhci_hcd
Jan 20 18:19:53 jean8v32-pc kernel: [79052.823602] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
Jan 20 18:19:53 jean8v32-pc kernel: [79052.823607] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 20 18:19:53 jean8v32-pc kernel: [79052.823610] usb 3-2.2: Product: Basic Optical Mouse
Jan 20 18:19:53 jean8v32-pc kernel: [79052.823613] usb 3-2.2: Manufacturer: Microsoft
Jan 20 18:19:53 jean8v32-pc kernel: [79052.840849] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input11
Jan 20 18:19:53 jean8v32-pc kernel: [79052.841382] hid-generic 0003:045E:0084.0007: input,hidraw3: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
Jan 20 18:26:49 jean8v32-pc kernel: [79469.575534] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
Jan 20 19:22:46 jean8v32-pc kernel: [82826.354765] usb 1-4: new high-speed USB device number 7 using ehci-pci
Jan 20 19:22:47 jean8v32-pc kernel: [82826.492990] usb 1-4: New USB device found, idVendor=13fe, idProduct=3600
Jan 20 19:22:47 jean8v32-pc kernel: [82826.492995] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 20 19:22:47 jean8v32-pc kernel: [82826.492998] usb 1-4: Product: USB DISK 2.0
Jan 20 19:22:47 jean8v32-pc kernel: [82826.493001] usb 1-4: Manufacturer:
Jan 20 19:22:47 jean8v32-pc kernel: [82826.493003] usb 1-4: SerialNumber: 07A30102BBA17DD8
Jan 20 19:22:47 jean8v32-pc kernel: [82826.495050] usb-storage 1-4:1.0: USB Mass Storage device detected
Jan 20 19:22:47 jean8v32-pc kernel: [82826.495207] usb-storage 1-4:1.0: Quirks match for vid 13fe pid 3600: 4000
Jan 20 19:22:47 jean8v32-pc kernel: [82826.495328] scsi15 : usb-storage 1-4:1.0
Jan 20 19:22:48 jean8v32-pc kernel: [82827.531537] scsi 15:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
Jan 20 19:22:48 jean8v32-pc kernel: [82827.531951] sd 15:0:0:0: Attached scsi generic sg3 type 0
Jan 20 19:22:50 jean8v32-pc kernel: [82829.793306] sd 15:0:0:0: [sdb] 15224832 512-byte logical blocks: (7.79 GB/7.25 GiB)
Jan 20 19:22:50 jean8v32-pc kernel: [82829.796178] sd 15:0:0:0: [sdb] Write Protect is off
Jan 20 19:22:50 jean8v32-pc kernel: [82829.796184] sd 15:0:0:0: [sdb] Mode Sense: 03 41 00 00
Jan 20 19:22:50 jean8v32-pc kernel: [82829.799077] sd 15:0:0:0: [sdb] No Caching mode page found
Jan 20 19:22:50 jean8v32-pc kernel: [82829.799083] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 19:22:50 jean8v32-pc kernel: [82829.807674] sd 15:0:0:0: [sdb] No Caching mode page found
Jan 20 19:22:50 jean8v32-pc kernel: [82829.807679] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 19:22:50 jean8v32-pc kernel: [82829.837192] sdb: sdb1
Jan 20 19:22:50 jean8v32-pc kernel: [82829.845140] sd 15:0:0:0: [sdb] No Caching mode page found
Jan 20 19:22:50 jean8v32-pc kernel: [82829.845145] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Jan 20 19:22:50 jean8v32-pc kernel: [82829.845149] sd 15:0:0:0: [sdb] Attached SCSI removable disk
Jan 20 19:22:51 jean8v32-pc kernel: [82831.282109] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jan 20 19:37:32 jean8v32-pc kernel: [83711.425193] ISO 9660 Extensions: Microsoft Joliet Level 3
Jan 20 19:37:32 jean8v32-pc kernel: [83711.425217] ISO 9660 Extensions: RRIP_1991A
Jan 20 19:47:29 jean8v32-pc kernel: [84308.533355] usb 1-4: USB disconnect, device number 7
Jan 20 21:36:30 jean8v32-pc kernel: [90849.384374] type=1400 audit(1421786190.458:76): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name=2F6D656469612F6A65616E387633322F70726F672F2E7E6C6F636B2E62756E636820646520636F6E762E6F647323 pid=15001 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
Jan 21 07:57:23 jean8v32-pc kernel: [128100.376240] type=1400 audit(1421823443.701:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=20998 comm="apparmor_parser"
Jan 21 07:57:23 jean8v32-pc kernel: [128100.376246] type=1400 audit(1421823443.701:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20998 comm="apparmor_parser"
Jan 21 07:57:23 jean8v32-pc kernel: [128100.376562] type=1400 audit(1421823443.701:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20998 comm="apparmor_parser"
Jan 21 14:11:01 jean8v32-pc kernel: [150516.371762] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 21 14:11:01 jean8v32-pc kernel: [150516.390357] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 22 07:40:25 jean8v32-pc kernel: [213476.703011] type=1400 audit(1421908825.190:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=32004 comm="apparmor_parser"
Jan 22 07:40:25 jean8v32-pc kernel: [213476.703018] type=1400 audit(1421908825.190:81): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=32004 comm="apparmor_parser"
Jan 22 07:40:25 jean8v32-pc kernel: [213476.703420] type=1400 audit(1421908825.190:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=32004 comm="apparmor_parser"et voici la sortie de : gedit /var/log/syslog
Jan 22 07:40:36 jean8v32-pc anacron[31709]: Job `cron.daily' terminated
Jan 22 07:40:36 jean8v32-pc anacron[31709]: Normal exit (1 job run)
Jan 22 08:09:01 jean8v32-pc CRON[32220]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 08:17:01 jean8v32-pc CRON[32273]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 22 08:39:01 jean8v32-pc CRON[32362]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 09:09:01 jean8v32-pc CRON[32529]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 09:17:01 jean8v32-pc CRON[32575]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 22 09:39:01 jean8v32-pc CRON[32666]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 09:57:36 jean8v32-pc dhclient: DHCPREQUEST of 192.168.1.79 on eth0 to 192.168.1.254 port 67 (xid=0x5868ee68)
Jan 22 09:57:36 jean8v32-pc dhclient: DHCPACK of 192.168.1.79 from 192.168.1.254
Jan 22 09:57:36 jean8v32-pc dhclient: bound to 192.168.1.79 -- renewal in 18557 seconds.
Jan 22 09:57:36 jean8v32-pc NetworkManager[6303]: <info> (eth0): DHCPv4 state changed renew -> renew
Jan 22 09:57:36 jean8v32-pc NetworkManager[6303]: <info> address 192.168.1.79
Jan 22 09:57:36 jean8v32-pc NetworkManager[6303]: <info> prefix 24 (255.255.255.0)
Jan 22 09:57:36 jean8v32-pc NetworkManager[6303]: <info> gateway 192.168.1.254
Jan 22 09:57:36 jean8v32-pc NetworkManager[6303]: <info> nameserver '192.168.1.254'
Jan 22 09:57:36 jean8v32-pc dbus[884]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 22 09:57:36 jean8v32-pc dbus[884]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 22 10:09:01 jean8v32-pc CRON[348]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 10:17:01 jean8v32-pc CRON[405]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 22 10:39:01 jean8v32-pc CRON[500]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Jan 22 10:52:13 jean8v32-pc gnome-screensaver-dialog: pam_ecryptfs: seteuid errorA bientôt
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#6 Le 22/01/2015, à 13:30
- le cinglé_001
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
J'ai besoin de quelles heures pour regarder et te donner une réponse.
#7 Le 22/01/2015, à 14:40
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Ok merci, à bientôt.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#8 Le 23/01/2015, à 21:23
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonsoir à tous, mes problemes (1,3 et 4) persistent et je ne sais vraiment pas comment faire ni par où commencer pour les résoudre.
En attendant que the_boss_oo1 revienne, si quelqu’un d'autre à une piste je suis toujours preneur.
Merci encore pour votre participation.
Dernière modification par ngmsky (Le 29/01/2015, à 14:31)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#9 Le 29/01/2015, à 13:14
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour,
Les problemes (1/, 3/ et 4/) de lenteur de démarrage ne sont toujours pas résolus.
J'attends au minimum 2,5 minutes (entre l'appuis sur le bouton ON et l'affichage du bureau Gnome).
SIncerement, c'est très pénible, surtout quand j'enttends que d'autres (pour ne pas dire la majorité) des utilisateur de linux dire que leur PC (ancien) démarrent en moins de 8 secondes !
J'ai éssayé cequi est proposé dans d'autre forum tel cette commande :
sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub
sudo update-grubcette commande a résolu un probleme de lenteur de demarrage sur ce post http://forum.ubuntu-fr.org/viewtopic.php?id=1772681
Mais ça ne change rien chez moi.
- Voici la config du grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=noaperture"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_GFXPAYLOAD_LINUX=None- Et Voici le retour de dmesg (code : dmesg_1) juste après le redemarrage du PC :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro quiet splash iommu=noaperture
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /PURE BLACK X58, BIOS 080016 09/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34c0e000-0x365fefff]
[ 0.000000] ACPI: RSDP 00000000000fa140 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000054 (v01 092811 XSDT1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v04 092811 FACP1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 005D0F (v02 1AEGH 1AEGHA52 00000A52 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000AC (v02 092811 APIC1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 00003C (v01 092811 OEMMCFG 20110928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 000082 (v01 092811 OEMB1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf78e0d0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790ce0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2094876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro quiet splash iommu=noaperture
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8137816K/8379504K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 241688K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-11.
[ 0.000000] NR_IRQS:16640 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3220.213 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6440.42 BogoMIPS (lpj=12880852)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000050] AppArmor: AppArmor initialized
[ 0.000052] Yama: becoming mindful.
[ 0.000586] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002031] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002653] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002663] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002857] Initializing cgroup subsys memory
[ 0.002862] Initializing cgroup subsys devices
[ 0.002864] Initializing cgroup subsys freezer
[ 0.002865] Initializing cgroup subsys blkio
[ 0.002866] Initializing cgroup subsys perf_event
[ 0.002869] Initializing cgroup subsys hugetlb
[ 0.002885] CPU: Physical Processor ID: 0
[ 0.002886] CPU: Processor Core ID: 0
[ 0.002890] mce: CPU supports 9 MCE banks
[ 0.002901] CPU0: Thermal monitoring enabled (TM1)
[ 0.002910] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002910] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002910] tlb_flushall_shift: 6
[ 0.002997] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.004054] ACPI: Core revision 20131115
[ 0.006523] ACPI: All ACPI Tables successfully acquired
[ 0.028806] ftrace: allocating 28552 entries in 112 pages
[ 0.040461] dmar: Host address width 39
[ 0.040463] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.040469] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f020fa
[ 0.040471] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.040477] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c9078010ef0462 ecap f020fe
[ 0.040479] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.040480] dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 0.040481] dmar: ATSR flags: 0x0
[ 0.040548] This system BIOS has enabled interrupt remapping
[ 0.040548] on a chipset that contains an erratum making that
[ 0.040548] feature unstable. To maintain system stability
[ 0.040548] interrupt remapping is being disabled. Please
[ 0.040548] contact your BIOS vendor for an update
[ 0.040584] Switched APIC routing to physical flat.
[ 0.040998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080683] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (fam: 06, model: 1a, stepping: 05)
[ 0.202498] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[ 0.202500] APIC delta adjusted to PM-Timer: 838522 (972745)
[ 0.202518] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.202522] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.202523] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.202525] ... version: 3
[ 0.202526] ... bit width: 48
[ 0.202527] ... generic registers: 4
[ 0.202528] ... value mask: 0000ffffffffffff
[ 0.202529] ... max period: 000000007fffffff
[ 0.202530] ... fixed-purpose events: 3
[ 0.202531] ... event mask: 000000070000000f
[ 0.204067] x86: Booting SMP configuration:
[ 0.217312] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.204069] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.296621] x86: Booted up 1 node, 8 CPUs
[ 0.296624] smpboot: Total of 8 processors activated (51523.40 BogoMIPS)
[ 0.301049] devtmpfs: initialized
[ 0.303200] EVM: security.selinux
[ 0.303201] EVM: security.SMACK64
[ 0.303202] EVM: security.ima
[ 0.303202] EVM: security.capability
[ 0.303234] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.303944] pinctrl core: initialized pinctrl subsystem
[ 0.303988] regulator-dummy: no parameters
[ 0.304016] RTC time: 10:52:42, date: 01/29/15
[ 0.304042] NET: Registered protocol family 16
[ 0.304117] cpuidle: using governor ladder
[ 0.304118] cpuidle: using governor menu
[ 0.304145] ACPI: bus type PCI registered
[ 0.304147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.304197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.304198] PCI: not using MMCONFIG
[ 0.304199] PCI: Using configuration type 1 for base access
[ 0.304922] bio: create slab <bio-0> at 0
[ 0.305039] ACPI: Added _OSI(Module Device)
[ 0.305041] ACPI: Added _OSI(Processor Device)
[ 0.305042] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.305043] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.306312] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310591] ACPI: SSDT 00000000bf78e210 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.310802] ACPI: Dynamic OEM Table Load:
[ 0.310804] ACPI: SSDT (null) 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.310876] ACPI: SSDT 00000000bf790660 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.311033] ACPI: Dynamic OEM Table Load:
[ 0.311034] ACPI: SSDT (null) 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.311278] ACPI: Interpreter enabled
[ 0.311284] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.311293] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.311294] ACPI: Using IOAPIC for interrupt routing
[ 0.311313] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.312147] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.323097] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323169] ACPI: No dock devices found.
[ 0.328086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.328089] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.328263] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.328601] PCI host bridge to bus 0000:00
[ 0.328603] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.328605] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.328606] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.328607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.328609] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.328610] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.328611] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.328621] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.328667] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.328728] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.328776] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.328816] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.328840] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.328887] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.328925] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.328948] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.328997] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.329034] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.329061] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.329105] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.329144] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.329172] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.329216] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.329255] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.329289] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.329374] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.329458] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.329539] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.329631] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.329672] pci 0000:00:1a.0: reg 0x20: [io 0x8080-0x809f]
[ 0.329759] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.329787] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.329828] pci 0000:00:1a.1: reg 0x20: [io 0x8400-0x841f]
[ 0.329914] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.329945] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.329986] pci 0000:00:1a.2: reg 0x20: [io 0x8480-0x849f]
[ 0.330072] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.330111] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.330133] pci 0000:00:1a.7: reg 0x10: [mem 0xfbaf6000-0xfbaf63ff]
[ 0.330218] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.330262] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.330296] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.330313] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[ 0.330375] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.330445] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.330509] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.330560] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.330595] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.330664] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.330708] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.330739] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.330781] pci 0000:00:1d.0: reg 0x20: [io 0x8800-0x881f]
[ 0.330867] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.330896] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.330937] pci 0000:00:1d.1: reg 0x20: [io 0x8880-0x889f]
[ 0.331019] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.331046] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.331087] pci 0000:00:1d.2: reg 0x20: [io 0x8c00-0x8c1f]
[ 0.331173] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.331213] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.331235] pci 0000:00:1d.7: reg 0x10: [mem 0xfbafc000-0xfbafc3ff]
[ 0.331323] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.331367] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.331396] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.331474] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.331505] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.331589] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.331598] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.331605] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.331612] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.331704] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.331721] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.331728] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.331738] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.331749] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.331759] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.331770] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.331864] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.331881] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafe000-0xfbafe0ff 64bit]
[ 0.331903] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.331984] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.332002] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07]
[ 0.332012] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883]
[ 0.332023] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807]
[ 0.332033] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483]
[ 0.332044] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f]
[ 0.332054] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f]
[ 0.332179] pci 0000:08:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.332188] pci 0000:08:00.0: reg 0x10: [io 0xd880-0xd887]
[ 0.332195] pci 0000:08:00.0: reg 0x14: [io 0xd800-0xd803]
[ 0.332201] pci 0000:08:00.0: reg 0x18: [io 0xe080-0xe087]
[ 0.332207] pci 0000:08:00.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.332213] pci 0000:08:00.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.332220] pci 0000:08:00.0: reg 0x24: [mem 0xfbeef000-0xfbeef7ff]
[ 0.332226] pci 0000:08:00.0: reg 0x30: [mem 0xfbed0000-0xfbedffff pref]
[ 0.332254] pci 0000:08:00.0: PME# supported from D3hot
[ 0.332290] pci 0000:08:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.332299] pci 0000:08:00.1: reg 0x10: [io 0xe480-0xe487]
[ 0.332305] pci 0000:08:00.1: reg 0x14: [io 0xe400-0xe403]
[ 0.332311] pci 0000:08:00.1: reg 0x18: [io 0xec00-0xec07]
[ 0.332317] pci 0000:08:00.1: reg 0x1c: [io 0xe880-0xe883]
[ 0.332324] pci 0000:08:00.1: reg 0x20: [io 0xe800-0xe80f]
[ 0.332330] pci 0000:08:00.1: reg 0x24: [mem 0xfbeefc00-0xfbeefc0f]
[ 0.332336] pci 0000:08:00.1: reg 0x30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.332365] pci 0000:08:00.1: PME# supported from D3hot
[ 0.338533] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.338537] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.338542] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.338609] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.338624] pci 0000:07:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[ 0.338695] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 0.346535] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.346542] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.346604] pci 0000:06:00.0: [1002:5b62] type 00 class 0x030000
[ 0.346613] pci 0000:06:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.346619] pci 0000:06:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.346625] pci 0000:06:00.0: reg 0x18: [mem 0xd8000000-0xd800ffff]
[ 0.346646] pci 0000:06:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.346673] pci 0000:06:00.0: supports D1 D2
[ 0.346703] pci 0000:06:00.1: [1002:5b72] type 00 class 0x038000
[ 0.346711] pci 0000:06:00.1: reg 0x10: [mem 0xdc000000-0xdc00ffff]
[ 0.346762] pci 0000:06:00.1: supports D1 D2
[ 0.346785] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.346791] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.346794] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.346796] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.346800] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.346832] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.346870] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.346926] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.347244] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.347550] pci 0000:02:00.0: reg 0x10: [mem 0xfbcdc000-0xfbcdffff 64bit]
[ 0.347696] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.348307] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]
[ 0.349025] pci 0000:02:00.0: supports D1 D2
[ 0.349026] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354661] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.354669] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.354675] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.354724] pci 0000:01:00.0: [13f6:0111] type 00 class 0x040100
[ 0.354740] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.354817] pci 0000:01:00.0: supports D1 D2
[ 0.354856] pci 0000:01:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.354876] pci 0000:01:03.0: reg 0x10: [mem 0xfbbfb800-0xfbbfbfff]
[ 0.354888] pci 0000:01:03.0: reg 0x14: [mem 0xfbbfc000-0xfbbfffff]
[ 0.354954] pci 0000:01:03.0: supports D1 D2
[ 0.354956] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.355013] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.355020] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.355026] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.355035] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.355036] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.355038] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.355039] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.355040] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.355042] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.355612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.355667] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.355717] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.355762] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.355814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.355867] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.355918] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.355966] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.356047] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.356051] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.356074] Found 1 acpi root devices
[ 0.356137] vgaarb: setting as boot device: PCI:0000:06:00.0
[ 0.356138] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.356140] vgaarb: loaded
[ 0.356141] vgaarb: bridge control possible 0000:06:00.0
[ 0.356249] SCSI subsystem initialized
[ 0.356281] libata version 3.00 loaded.
[ 0.356293] ACPI: bus type USB registered
[ 0.356303] usbcore: registered new interface driver usbfs
[ 0.356309] usbcore: registered new interface driver hub
[ 0.356332] usbcore: registered new device driver usb
[ 0.356404] PCI: Using ACPI for IRQ routing
[ 0.361808] PCI: Discovered peer bus ff
[ 0.361809] PCI: root bus ff: using default resources
[ 0.361810] PCI: Probing PCI hardware (bus ff)
[ 0.361825] PCI host bridge to bus 0000:ff
[ 0.361827] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.361828] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.361829] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.361834] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.361860] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.361886] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.361909] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.361935] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.361959] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.361982] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.362006] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.362029] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.362053] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.362076] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.362100] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.362124] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.362147] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.362171] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.362195] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.362219] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.362242] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.362266] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.362298] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.362301] PCI: pci_cache_line_size set to 64 bytes
[ 0.362431] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.362432] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.362486] NetLabel: Initializing
[ 0.362487] NetLabel: domain hash size = 128
[ 0.362488] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.362498] NetLabel: unlabeled traffic allowed by default
[ 0.362619] hpet clockevent registered
[ 0.362626] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.362634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.362636] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.364823] Switched to clocksource hpet
[ 0.368149] AppArmor: AppArmor Filesystem Enabled
[ 0.368166] pnp: PnP ACPI init
[ 0.368176] ACPI: bus type PNP registered
[ 0.368224] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.368226] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.368228] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.368230] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.368231] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.368233] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.368235] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.368263] pnp 00:01: [dma 4]
[ 0.368276] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.368304] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.368345] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.368368] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.368723] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.368726] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.368728] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368852] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.368854] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.368855] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.368857] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.368859] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.368860] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.368862] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368930] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.368975] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.368978] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369049] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.369051] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.369053] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369096] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.369099] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369221] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.369223] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.369224] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.369226] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.369228] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.369230] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.369342] pnp: PnP ACPI: found 12 devices
[ 0.369343] ACPI: bus type PNP unregistered
[ 0.375775] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.375778] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.375780] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.375790] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.375805] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.375808] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.375809] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.375811] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.375812] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.375815] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.375817] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375819] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375821] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.375823] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.375825] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.375828] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.375833] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.375836] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.375841] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.375843] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.375846] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.375848] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.375852] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.375859] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.375866] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.375872] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.375880] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.375887] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375895] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.375901] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.375909] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.375916] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375924] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.375930] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.375938] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.375948] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.375949] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.375951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.375952] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.375953] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.375955] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.375956] pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
[ 0.375957] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.375959] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.375960] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.375961] pci_bus 0000:06: resource 1 [mem 0xd7f00000-0xdfffffff]
[ 0.375962] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.375964] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.375965] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.375966] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375968] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.375969] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.375970] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375972] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.375973] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.375974] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.375975] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.375977] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.375978] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.375979] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.375980] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.375982] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.375984] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.376005] NET: Registered protocol family 2
[ 0.376154] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.376415] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.376433] TCP: reno registered
[ 0.376441] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376465] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376523] NET: Registered protocol family 1
[ 0.377979] pci 0000:06:00.0: Video device with shadowed ROM
[ 0.378034] PCI: CLS 256 bytes, default 64
[ 0.378067] Trying to unpack rootfs image as initramfs...
[ 0.715481] Freeing initrd memory: 26564K (ffff880034c0e000 - ffff8800365ff000)
[ 0.715528] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.715530] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.715779] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715789] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715797] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715804] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715813] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715820] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715828] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715835] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
[ 0.715879] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.715880] Scanning for low memory corruption every 60 seconds
[ 0.716144] Initialise system trusted keyring
[ 0.716180] audit: initializing netlink socket (disabled)
[ 0.716188] type=2000 audit(1422528762.576:1): initialized
[ 0.735458] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.736277] zbud: loaded
[ 0.736398] VFS: Disk quotas dquot_6.5.2
[ 0.736430] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.736757] fuse init (API version 7.22)
[ 0.736826] msgmni has been set to 15946
[ 0.736864] Key type big_key registered
[ 0.737449] Key type asymmetric registered
[ 0.737451] Asymmetric key parser 'x509' registered
[ 0.737471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.737516] io scheduler noop registered
[ 0.737517] io scheduler deadline registered (default)
[ 0.737534] io scheduler cfq registered
[ 0.737631] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.737690] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 0.737747] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.737804] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.737860] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.737906] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.738043] pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
[ 0.738207] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 0.738290] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.738309] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.738327] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.738345] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.738364] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.738373] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.738374] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.738375] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 0.738378] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.738384] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.738385] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.738387] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.738393] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.738394] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.738395] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.738398] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.738403] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.738406] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.738411] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.738414] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.738430] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.738437] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.738453] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.738455] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.738462] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.738470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.738505] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 174b ss_did 1000
[ 0.738533] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.738545] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 174b ss_did 1000
[ 0.738568] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.738571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.738602] intel_idle: MWAIT substates: 0x1120
[ 0.738615] intel_idle: v0.4 model 0x1A
[ 0.738616] intel_idle: lapic_timer_reliable_states 0x2
[ 0.738787] ipmi message handler version 39.2
[ 0.738833] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.738836] ACPI: Power Button [PWRB]
[ 0.738857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.738859] ACPI: Power Button [PWRF]
[ 0.739235] ACPI: Invalid active0 threshold
[ 0.739440] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.739442] ACPI: Thermal Zone [THRM] (22 C)
[ 0.739456] GHES: HEST is not enabled!
[ 0.739509] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.740633] Linux agpgart interface v0.103
[ 0.741670] brd: module loaded
[ 0.742205] loop: module loaded
[ 0.742284] ata_piix 0000:00:1f.2: version 2.13
[ 0.742371] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.743111] scsi0 : ata_piix
[ 0.743182] scsi1 : ata_piix
[ 0.743207] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.743215] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.743303] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.743943] scsi2 : ata_piix
[ 0.744040] scsi3 : ata_piix
[ 0.744063] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.744070] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.744241] libphy: Fixed MDIO Bus: probed
[ 0.744295] tun: Universal TUN/TAP device driver, 1.6
[ 0.744295] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744331] PPP generic driver version 2.4.2
[ 0.744366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.744369] ehci-pci: EHCI PCI platform driver
[ 0.744483] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.744487] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.744502] ehci-pci 0000:00:1a.7: debug port 1
[ 0.748403] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.748417] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbaf6000
[ 0.756822] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.756868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.756869] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756870] usb usb1: Product: EHCI Host Controller
[ 0.756872] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.756873] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.756947] hub 1-0:1.0: USB hub found
[ 0.756952] hub 1-0:1.0: 6 ports detected
[ 0.757161] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.757165] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.757180] ehci-pci 0000:00:1d.7: debug port 1
[ 0.761101] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.761115] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbafc000
[ 0.772818] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.772860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.772861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772862] usb usb2: Product: EHCI Host Controller
[ 0.772864] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.772865] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.772992] hub 2-0:1.0: USB hub found
[ 0.772996] hub 2-0:1.0: 6 ports detected
[ 0.773106] ehci-platform: EHCI generic platform driver
[ 0.773110] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.773111] ohci-pci: OHCI PCI platform driver
[ 0.773118] ohci-platform: OHCI generic platform driver
[ 0.773121] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.773217] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.773220] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.773258] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008080
[ 0.773291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773292] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773293] usb usb3: Product: UHCI Host Controller
[ 0.773295] usb usb3: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773296] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.773482] hub 3-0:1.0: USB hub found
[ 0.773488] hub 3-0:1.0: 2 ports detected
[ 0.773638] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.773642] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.773682] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008400
[ 0.773714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773715] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773717] usb usb4: Product: UHCI Host Controller
[ 0.773718] usb usb4: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773719] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.773906] hub 4-0:1.0: USB hub found
[ 0.773912] hub 4-0:1.0: 2 ports detected
[ 0.774059] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.774063] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.774090] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008480
[ 0.774123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774125] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774126] usb usb5: Product: UHCI Host Controller
[ 0.774127] usb usb5: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774128] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.774317] hub 5-0:1.0: USB hub found
[ 0.774323] hub 5-0:1.0: 2 ports detected
[ 0.774473] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.774477] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.774506] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008800
[ 0.774539] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774540] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774541] usb usb6: Product: UHCI Host Controller
[ 0.774543] usb usb6: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774544] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.774727] hub 6-0:1.0: USB hub found
[ 0.774733] hub 6-0:1.0: 2 ports detected
[ 0.774884] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.774887] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.774915] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008880
[ 0.774947] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774948] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774950] usb usb7: Product: UHCI Host Controller
[ 0.774951] usb usb7: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774952] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.775135] hub 7-0:1.0: USB hub found
[ 0.775141] hub 7-0:1.0: 2 ports detected
[ 0.775288] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.775292] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.775319] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008c00
[ 0.775351] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.775353] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.775354] usb usb8: Product: UHCI Host Controller
[ 0.775355] usb usb8: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.775357] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.775540] hub 8-0:1.0: USB hub found
[ 0.775546] hub 8-0:1.0: 2 ports detected
[ 0.775650] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.775654] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[ 0.775773] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 0.775777] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 0.775782] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.775788] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.775792] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.775796] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.775801] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.775805] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.775895] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.775897] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.775898] usb usb9: Product: xHCI Host Controller
[ 0.775900] usb usb9: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.775901] usb usb9: SerialNumber: 0000:07:00.0
[ 0.776008] hub 9-0:1.0: USB hub found
[ 0.776015] hub 9-0:1.0: 2 ports detected
[ 0.776067] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.776069] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[ 0.779142] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.779143] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779145] usb usb10: Product: xHCI Host Controller
[ 0.779146] usb usb10: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.779147] usb usb10: SerialNumber: 0000:07:00.0
[ 0.779249] hub 10-0:1.0: USB hub found
[ 0.779259] hub 10-0:1.0: 2 ports detected
[ 0.788927] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.789340] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.789344] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.789558] mousedev: PS/2 mouse device common for all mice
[ 0.789914] rtc_cmos 00:02: RTC can wake from S4
[ 0.790061] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.790097] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.790138] device-mapper: uevent: version 1.0.3
[ 0.790226] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.790231] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.790303] TCP: cubic registered
[ 0.790362] NET: Registered protocol family 10
[ 0.790487] NET: Registered protocol family 17
[ 0.790491] Key type dns_resolver registered
[ 0.790782] Loading compiled-in X.509 certificates
[ 0.791530] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[ 0.791537] registered taskstats version 1
[ 0.793842] Key type trusted registered
[ 0.796223] Key type encrypted registered
[ 0.798785] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.798790] IMA: No TPM chip found, activating TPM-bypass!
[ 0.799425] regulator-dummy: disabling
[ 0.799572] Magic number: 15:546:882
[ 0.799581] hub 8-0:1.0: hash matches
[ 0.799816] rtc_cmos 00:02: setting system clock to 2015-01-29 10:52:42 UTC (1422528762)
[ 0.801907] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.801908] EDD information not available.
[ 0.801925] PM: Hibernation image not present or could not be loaded.
[ 1.075523] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.090160] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.395571] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.395588] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.536834] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.536851] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.536864] ata2.01: link offline, clearing class 3 to NONE
[ 1.544988] ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 1.561079] ata2.00: configured for UDMA/100
[ 1.565051] scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 1.567631] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.567633] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.567778] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.567882] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.569172] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.569174] Write protecting the kernel read-only data: 12288k
[ 1.570994] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.572468] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.586820] systemd-udevd[165]: starting version 204
[ 1.588906] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1.599292] scsi4 : pata_marvell
[ 1.599351] scsi5 : pata_marvell
[ 1.599373] ata5: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe800 irq 17
[ 1.599374] ata6: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe808 irq 17
[ 1.601832] ahci 0000:08:00.0: version 3.0
[ 1.601895] ahci 0000:08:00.0: irq 55 for MSI/MSI-X
[ 1.601909] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS
[ 1.604482] [drm] Initialized drm 1.1.0 20060810
[ 1.604964] sky2: driver version 1.30
[ 1.605263] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.605739] sky2 0000:02:00.0: irq 56 for MSI/MSI-X
[ 1.606682] sky2 0000:02:00.0 eth0: addr dc:9c:52:00:04:9d
[ 1.616815] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.616820] ahci 0000:08:00.0: flags: 64bit ncq fbs pio
[ 1.617602] scsi6 : ahci
[ 1.617698] scsi7 : ahci
[ 1.617793] scsi8 : ahci
[ 1.617870] scsi9 : ahci
[ 1.617958] scsi10 : ahci
[ 1.618031] scsi11 : ahci
[ 1.618102] scsi12 : ahci
[ 1.618178] scsi13 : ahci
[ 1.618215] ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 55
[ 1.618218] ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 55
[ 1.618220] ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 55
[ 1.618222] ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 55
[ 1.618224] ata11: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 55
[ 1.618227] ata12: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 55
[ 1.618229] ata13: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 55
[ 1.618231] ata14: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 55
[ 1.627461] [drm] radeon kernel modesetting enabled.
[ 1.627669] [drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x174B:0x0490).
[ 1.627681] [drm] register mmio base: 0xD8000000
[ 1.627682] [drm] register mmio size: 65536
[ 1.627726] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.627730] radeon 0000:06:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.627731] radeon 0000:06:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.627735] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.627736] [drm] RAM width 128bits DDR
[ 1.627800] [TTM] Zone kernel: Available graphics memory: 4083616 kiB
[ 1.627802] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.627803] [TTM] Initializing pool allocator
[ 1.627805] [TTM] Initializing DMA pool allocator
[ 1.627818] [drm] radeon: 256M of VRAM memory ready
[ 1.627818] [drm] radeon: 512M of GTT memory ready.
[ 1.627826] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.628192] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.628714] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.628728] radeon 0000:06:00.0: WB enabled
[ 1.628730] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff88022e29d000
[ 1.628731] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.628732] [drm] Driver supports precise vblank timestamp query.
[ 1.628764] radeon 0000:06:00.0: irq 57 for MSI/MSI-X
[ 1.628773] radeon 0000:06:00.0: radeon: using MSI.
[ 1.628790] [drm] radeon: irq initialized.
[ 1.628795] [drm] Loading R300 Microcode
[ 1.629034] [drm] radeon: ring at 0x00000000A0001000
[ 1.629053] [drm] ring test succeeded in 1 usecs
[ 1.629222] [drm] ib test succeeded in 0 usecs
[ 1.629336] [drm] Radeon Display Connectors
[ 1.629337] [drm] Connector 0:
[ 1.629338] [drm] VGA-1
[ 1.629339] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.629340] [drm] Encoders:
[ 1.629340] [drm] CRT1: INTERNAL_DAC1
[ 1.629341] [drm] Connector 1:
[ 1.629342] [drm] DVI-I-1
[ 1.629342] [drm] HPD1
[ 1.629344] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.629344] [drm] Encoders:
[ 1.629345] [drm] CRT2: INTERNAL_DAC2
[ 1.629346] [drm] DFP1: INTERNAL_TMDS1
[ 1.629346] [drm] Connector 2:
[ 1.629347] [drm] SVIDEO-1
[ 1.629347] [drm] Encoders:
[ 1.629348] [drm] TV1: INTERNAL_DAC2
[ 1.668841] firewire_ohci 0000:01:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.686234] [drm] fb mappable at 0xC00C0000
[ 1.686236] [drm] vram apper at 0xC0000000
[ 1.686236] [drm] size 5242880
[ 1.686237] [drm] fb depth is 24
[ 1.686238] [drm] pitch is 5120
[ 1.686416] fbcon: radeondrmfb (fb0) is primary device
[ 1.736671] tsc: Refined TSC clocksource calibration: 3219.929 MHz
[ 1.740999] Console: switching to colour frame buffer device 160x64
[ 1.742949] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[ 1.742950] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.742951] usb 2-3: Product: 802.11 n WLAN
[ 1.742952] usb 2-3: Manufacturer: Ralink
[ 1.742953] usb 2-3: SerialNumber: 1.0
[ 1.745310] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 1.745311] radeon 0000:06:00.0: registered panic notifier
[ 1.745314] [drm] Initialized radeon 2.36.0 20080528 for 0000:06:00.0 on minor 0
[ 1.940942] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.940966] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.940989] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.941029] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.941045] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.941064] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.941075] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.941278] ata14.00: configured for UDMA/66
[ 1.944850] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.944891] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.947061] ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 1.947065] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.948057] ata7.00: configured for UDMA/133
[ 1.948448] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 1.948639] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.948667] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.948670] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.948840] sd 6:0:0:0: [sda] Write Protect is off
[ 1.948843] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.949012] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.953284] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.953439] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 2.011360] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.013912] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.169050] firewire_core 0000:01:03.0: created device fw0: GUID f698f698fbbf5e21, S400
[ 2.240838] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.409286] usb 3-2: New USB device found, idVendor=1631, idProduct=a510
[ 2.409290] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.409293] usb 3-2: Product: USB HUB Keyboard
[ 2.409296] usb 3-2: Manufacturer: Chicony
[ 2.411323] hub 3-2:1.0: USB hub found
[ 2.413266] hub 3-2:1.0: 5 ports detected
[ 2.414251] hub 3-2:1.0: insufficient power available to use all downstream ports
[ 2.656908] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.733115] Switched to clocksource tsc
[ 2.809513] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.809518] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.052912] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 3.326009] random: nonblocking pool is initialized
[ 3.772647] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.503014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.559146] systemd-udevd[388]: starting version 204
[ 12.605570] lp: driver loaded but no devices found
[ 12.613536] EDAC MC: Ver: 3.0.0
[ 12.618958] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 12.619060] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 12.619158] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 12.619351] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 12.619356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.619447] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.653581] cannot find the slot for index 0 (range 0-0), error: -16
[ 12.653584] hda-intel: Error creating card!
[ 12.653588] snd_hda_intel: probe of 0000:00:1b.0 failed with error -16
[ 12.658296] ppdev: user-space parallel port driver
[ 12.661358] kvm: disabled by bios
[ 12.664381] Bluetooth: Core ver 2.17
[ 12.664392] NET: Registered protocol family 31
[ 12.664394] Bluetooth: HCI device and connection manager initialized
[ 12.664400] Bluetooth: HCI socket layer initialized
[ 12.664402] Bluetooth: L2CAP socket layer initialized
[ 12.664405] Bluetooth: SCO socket layer initialized
[ 12.666386] usbcore: registered new interface driver btusb
[ 12.680081] type=1400 audit(1422528774.377:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=533 comm="apparmor_parser"
[ 12.680088] type=1400 audit(1422528774.377:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
[ 12.680093] type=1400 audit(1422528774.377:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 12.680527] type=1400 audit(1422528774.377:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
[ 12.680533] type=1400 audit(1422528774.377:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 12.680728] type=1400 audit(1422528774.377:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
[ 12.697715] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 12.858389] cfg80211: Calling CRDA to update world regulatory domain
[ 12.984095] cfg80211: World regulatory domain updated:
[ 12.984097] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.984099] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.984100] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.984101] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.984102] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.984103] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.433929] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 17.027205] init: failsafe main process (757) killed by TERM signal
[ 17.395081] type=1400 audit(1422528779.089:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=917 comm="apparmor_parser"
[ 17.395968] type=1400 audit(1422528779.093:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
[ 17.395976] type=1400 audit(1422528779.093:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
[ 17.395981] type=1400 audit(1422528779.093:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
[ 17.495639] init: cups main process (926) killed by HUP signal
[ 17.495646] init: cups main process ended, respawning
[ 17.856957] Bluetooth: RFCOMM TTY layer initialized
[ 17.856973] Bluetooth: RFCOMM socket layer initialized
[ 17.856980] Bluetooth: RFCOMM ver 1.11
[ 17.882061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.882063] Bluetooth: BNEP filters: protocol multicast
[ 17.882067] Bluetooth: BNEP socket layer initialized
[ 18.167817] usb 8-2: device descriptor read/64, error -110
[ 18.308822] init: gdm main process (1080) killed by TERM signal
[ 18.310212] audit_printk_skb: 150 callbacks suppressed
[ 18.310214] type=1400 audit(1422528780.005:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1144 comm="apparmor_parser"
[ 18.310365] type=1400 audit(1422528780.005:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1143 comm="apparmor_parser"
[ 19.437027] sky2 0000:02:00.0 eth0: enabling interface
[ 19.437735] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.441078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.588573] init: samba-ad-dc main process (1231) terminated with status 1
[ 22.476930] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 22.476948] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.717942] init: plymouth-upstart-bridge main process ended, respawning
[ 22.721588] init: plymouth-upstart-bridge main process (1387) terminated with status 1
[ 22.721601] init: plymouth-upstart-bridge main process ended, respawning
[ 23.105133] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.107419] vboxdrv: Found 8 processor cores.
[ 23.107667] vboxdrv: fAsync=0 offMin=0x18c offMax=0x12ea
[ 23.107737] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.107738] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 23.314244] vboxpci: IOMMU not found (not registered)
[ 25.670081] init: plymouth-stop pre-start process (1623) terminated with status 1
[ 33.382935] usb 8-2: device descriptor read/64, error -110
[ 33.599016] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 33.741899] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 33.770233] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 33.773105] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 33.773334] usbcore: registered new interface driver rt2800usb
[ 33.791022] systemd-udevd[407]: renamed network interface wlan0 to wlan1
[ 33.794256] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 33.823152] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 33.842883] usb 8-2: new full-speed USB device number 3 using uhci_hcd
[ 34.060657] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 34.061863] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 47.533509] type=1400 audit(1422528809.239:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2239 comm="apparmor_parser"
[ 47.533515] type=1400 audit(1422528809.239:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2239 comm="apparmor_parser"
[ 47.533831] type=1400 audit(1422528809.239:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2239 comm="apparmor_parser"
[ 48.947164] usb 8-2: device descriptor read/64, error -110
[ 64.154681] usb 8-2: device descriptor read/64, error -110
[ 64.370495] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 74.772664] usb 8-2: device not accepting address 4, error -110
[ 74.884643] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 85.286887] usb 8-2: device not accepting address 5, error -110
[ 85.286978] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 85.759916] usb 3-2.1: new low-speed USB device number 3 using uhci_hcd
[ 85.918954] usb 3-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 85.918959] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.918962] usb 3-2.1: Product: IR Receiver
[ 85.918965] usb 3-2.1: Manufacturer: Chicony
[ 86.011907] usb 3-2.2: new low-speed USB device number 4 using uhci_hcd
[ 86.166909] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
[ 86.166914] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.166917] usb 3-2.2: Product: Basic Optical Mouse
[ 86.166920] usb 3-2.2: Manufacturer: Microsoft
[ 86.259900] usb 3-2.3: new full-speed USB device number 5 using uhci_hcd
[ 86.399901] usb 3-2.3: New USB device found, idVendor=08ff, idProduct=2580
[ 86.399906] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 86.399909] usb 3-2.3: Product: Fingerprint Sensor
[ 86.491893] usb 3-2.5: new full-speed USB device number 6 using uhci_hcd
[ 86.642894] usb 3-2.5: New USB device found, idVendor=1631, idProduct=0510
[ 86.642899] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.642902] usb 3-2.5: Product: USB HUB Keyboard
[ 86.642905] usb 3-2.5: Manufacturer: Chicony
[ 86.663358] hidraw: raw HID events driver (C) Jiri Kosina
[ 86.720055] usbcore: registered new interface driver usbhid
[ 86.720058] usbhid: USB HID core driver
[ 86.746951] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input5
[ 86.747349] hid-generic 0003:1631:0006.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1a.0-2.1/input0
[ 86.747462] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input6
[ 86.747614] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
[ 86.747771] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.0/input/input7
[ 86.747862] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input0
[ 86.751929] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.1/input/input8
[ 86.752103] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input1
[ 106.736298] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 106.752530] ISOFS: changing to secondary rootMerci d'avance pour votre intervention.
Dernière modification par ngmsky (Le 30/01/2015, à 11:08)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#10 Le 29/01/2015, à 15:15
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour,
ngmsky a écrit :
[…]
J'ai éssayé cequi est proposé dans d'autre forum tel cette commande :sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub sudo update-grubcette commande a résolu un probleme de lenteur de demarrage sur ce post http://forum.ubuntu-fr.org/viewtopic.php?id=1772681
Mais ça ne change rien chez moi.
- Voici la config du grub
# If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=noaperture" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" GRUB_GFXPAYLOAD_LINUX=None[…]
Ça ne change rien parce que le fichier /etc/default/grub n’a, a priori, pas été modifié.
As-tu eu un message d’erreur lors de la première commande ?
Et peux-tu préciser pourquoi on trouve iommu=noaperture et GRUB_GFXPAYLOAD_LINUX=None ?
Hors ligne
#11 Le 29/01/2015, à 16:09
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour nany et merci pour ton intervention très rapide.
Pour commencer, voici mon fichier /etc/default/grub (que j'avais sauvegardé, avant de taper les commandes) :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_GFXPAYLOAD_LINUX=NoneEnfaite, en tapant vos 2 commandes :
sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub
sudo update-grubVOici cequi s'affiche :
jean8v32@jean8v32-pc:~$ sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub
[sudo] password for jean8v32:
jean8v32@jean8v32-pc:~$ sudo update-grub
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-3.13.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-41-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-41-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-34-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-34-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-32-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-30-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-29-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-29-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
jean8v32@jean8v32-pc:~$ Le fichier n'etait toujours pas modifié (il me semble) et je n'avais aucune erreur, mais un message alerte apres 2ieme commande (update-grub).
nany a écrit :
Et peux-tu préciser pourquoi on trouve iommu=noaperture et GRUB_GFXPAYLOAD_LINUX=None ?
Le temps de demarrage etant toujours le même, j'ai donc éssayé une autre solution proposé http://forum.ubuntu-fr.org/viewtopic.php?id=1057861
Je suis arrivé sur ce post parce que j'ai éssayé (par curiosité) de trouver les messages d'erreur au demarrage, en lisant la sortie de la commande dmesg qui contenait ceci : "No AGP bridge found".
C'est en cherchant ce terme sur google que je suis arrivé sur le post cité ci-dessus.
Je me suis donc dis que la solution proposé me concernerait surement (à 90%).
En gros, ceque j'ai compris c'est qu'à chaque demarrage, le noyau linux cherche (les pilotes ?) les périphérique AGP et ne les trouve pas (No AGP bridge found) ce qui est donc normal puisque les port (extension) AGP ne plus utilisés mais sont plutôt remplacés par les PCI-express.
Pour ne pas perdre le temps (de recherche des périphérique AGP inutilement), il sufiirait de desactiver cette recherche en ajoutant
iommu=noaperture après l'option quiet splash, dans le fichier : /etc/default/grub
d'ou :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=noaperture"Mais je n'ai constaté aune amélioration du temps de demarrage.
Par contre, je ne sais pas pourquoi il y'a : GRUB_GFXPAYLOAD_LINUX=None
Et je vois qu'il etait déja à None, avant même mes modifications.
Merci encore, je reste à l'ecoute.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#12 Le 29/01/2015, à 16:31
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
OK. Laissons GRUB_GFXPAYLOAD_LINUX tranquille pour le moment car il ne devrait pas être gênant.
En revanche, puisque le paramètre iommu semble sans effet, on va le remplacer par tpm_tis.force=1.
Bon, je vais te donner une nouvelle commande sed car j’aimerais bien en même temps essayer de comprendre pourquoi ça n’a pas marché.
sudo sed -i 's/iommu=noaperture/tpm_tis.force=1/' /etc/default/grubPuis re-vérifie le fichier, il devrait avoir cette ligne :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash tpm_tis.force=1"Si ce n’est pas le cas, fait la modification manuellement (et tant pis pour la compréhension du problème de sed) et lance un
sudo update-grubpuis redémarre pour voir s’il y a une amélioration.
Hors ligne
#13 Le 29/01/2015, à 17:03
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
@ Nany"
Ca n'a pas marché car le fichier d'origine ne contient pas "quiet splash" tout simplement !!!
car il contient GRUB_CMDLINE_LINUX_DEFAULT="splash quiet"
Dernière modification par Bougron (Le 29/01/2015, à 17:03)
Hors ligne
#14 Le 29/01/2015, à 17:06
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Arf, bien vu Bougron. Je suis tellement habitué à lire quiet splash que je n’ai même pas remarqué l’inversion.
P.S. : je dois m’absenter une heure ou deux.
Hors ligne
#15 Le 29/01/2015, à 17:24
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
ngmsky a écrit :
.......
J'ai essayé ce qui est proposé dans d'autre forum tel cette commande :sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub sudo update-grubcette commande a résolu un problème de lenteur de démarrage sur ce post http://forum.ubuntu-fr.org/viewtopic.php?id=1772681
Mais ça ne change rien chez moi.
Merci d'avance pour votre intervention.
Au vu du contenu de ton fichier, tu pourrais de nouveau tenter cette commande, qui devient alors
sudo sed -i 's/splash quiet/quiet splash tpm_tis.force=1/' /etc/default/grub
sudo update-grubHors ligne
#16 Le 29/01/2015, à 17:33
- inbox
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Salut,
En plus de ce que te préconise Nany, débranche les périphériques USB non indispensables au démarrage du PC. Je te propose cela à cause de ces messages das dmesg :
usb 8-2: device descriptor read/64, error -110Après les avoir débranchés, redémarre et dis nous si le PC démarre plus vite. Tu pourras aussi donner le nouveau contenu de dmseg.
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#17 Le 29/01/2015, à 17:37
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
je relance les 2 commandes :
jean8v32@jean8v32-pc:~$ sudo sed -i 's/iommu=noaperture/tpm_tis.force=1/' /etc/default/grub
jean8v32@jean8v32-pc:~$ sudo update-grub
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-3.13.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-41-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-41-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-34-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-34-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-32-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-30-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-29-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-29-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
faitoui, je me souviens l'avoir inversé manuellement parce que je pensais que c'etait une erreur. dans les autre forum je voyais que c'etait marqué "quiet splash" alors que chez moi ((par defaut) c'etait "splash quiet".
j'ai cru qu'il fallait l'inverser pour avoir la bonne configuration.
voici le fichier grub final (juste la partie mofiée)
RUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet" tpm_tis.force=1"
GRUB_CMDLINE_LINUX=""je redemarre pour voir s'il y'a un changement.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#18 Le 29/01/2015, à 17:53
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Tu peux aussi penser à traiter le problème
Jan 20 16:36:22 jean8v32-pc kernel: [72842.370403] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Mais je ne pense pas que cela influe beaucoup sur le temps de démarrage.
Hors ligne
#19 Le 29/01/2015, à 18:04
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Apres redemarrage : idem, pas de changement.
Pour le probleme : "FAT-fs (sdb1): Volume was not properly unmounted."
J'ai reverifié dans Gparted, actuellement, je que le sda. Le sdb1 était surement une clé usb que qui était branché quand j'avais fait le dmesg. Mais actuellement, sans ce sdb1, le probleme est toujours là, comme tu la dis, il n'influx pas trop sur le temps de demarrage.
Merci encore pour vos propositions.
Dernière modification par ngmsky (Le 29/01/2015, à 18:50)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#20 Le 29/01/2015, à 18:21
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
inbox a écrit :
Salut,
En plus de ce que te préconise Nany, débranche les périphériques USB non indispensables au démarrage du PC. Je te propose cela à cause de ces messages das dmesg :
usb 8-2: device descriptor read/64, error -110Après les avoir débranchés, redémarre et dis nous si le PC démarre plus vite. Tu pourras aussi donner le nouveau contenu de dmseg.
A+
J'ai vérifié mais je n'ai pas de périphérique usb non indispensables. Je me souviens qu'avant (hier je crois) j'avais 3 clé wifi branché, dont seulement une seule (Ralink) etait installé et reconnu pas ubuntu. Ce n'est donc que hier que j'ai retiré les 2 autres (Realtek) que je n'ai toujours pas réussi à installé et configuré.
Sinon le reste des périphérique usb branché me sont utilses (clavier, souris et une imprimante à ticket de caisse Dymo).
voici d'ailleurs la sortie de lsusb :
jean8v32@jean8v32-pc:~$ lsusb
Bus 002 Device 003: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 006: ID 1631:0510 Good Way Technology
Bus 003 Device 005: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 004: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 003 Device 003: ID 1631:0006 Good Way Technology
Bus 003 Device 002: ID 1631:a510 Good Way Technology
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubNB : le Atheros Bluetooth est natif à la carte mère.
En passant, j'ai rexécuté dmesg et j'ai cherché
usb 8-2: device descriptor read/64, error -110,
il y'a 4 lignes présentes dans les 2 fichiers (l'ancien et le dernier dmesg) alors que je n'ai que 3 périphériques usb branchés et utilises.
Merci encore.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#21 Le 29/01/2015, à 18:22
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
ngmsky a écrit :
je relance les 2 commandes :
voici le fichier grub final (juste la partie mofiée)
RUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="splash quiet" tpm_tis.force=1" GRUB_CMDLINE_LINUX=""je redemarre pour voir s'il y'a un changement.
Il y a une grosse erreur de codif
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet" tpm_tis.force=1"
il faut
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet tpm_tis.force=1"
Tente d'enlever ce guillemet du milieu comme tu peux en accédant directement au fichier de référence /etc/default/grub
par la commande gedit ou la commande nano
Dernière modification par Bougron (Le 29/01/2015, à 18:45)
Hors ligne
#22 Le 29/01/2015, à 18:36
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Ok merci.
J'ai fait la modification manuellement (avec gedit) et voici le dernier :
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet tpm_tis.force=1"
GRUB_CMDLINE_LINUX=""J'ai ensuite relancé sudo update-grub qui à donné exatement le même retour que précedement (pour ne pas trop saturer le post).
Je redemarre et je vous tiens accourant.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#23 Le 29/01/2015, à 18:48
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bon, toujours rien. temps total (chronometré) de l'allumage à l'affichage du bureau (sans compter le temps du saisie du mot de passe) : 2min33 secondes.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#24 Le 29/01/2015, à 18:50
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Me revoilà.
Bon, je vois que c’est un petit peu laborieux pour mettre correctement l’option mais cette fois-ci, ça devrait être bon.
Redonne le résultat de dmesg après redémarrage.
Hors ligne
#25 Le 29/01/2015, à 18:57
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
OK merci
Oui c'est vrai. Est-il bon (le dernier grub que j'ai posté) ?
voici le resultat de dmsg (je viens de redemarré il y'a moins de 10 minutes. Et je n'ai lancé que firefox, le terminale et gedit.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet tpm_tis.force=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /PURE BLACK X58, BIOS 080016 09/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34c0e000-0x365fefff]
[ 0.000000] ACPI: RSDP 00000000000fa140 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000054 (v01 092811 XSDT1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v04 092811 FACP1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 005D0F (v02 1AEGH 1AEGHA52 00000A52 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000AC (v02 092811 APIC1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 00003C (v01 092811 OEMMCFG 20110928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 000082 (v01 092811 OEMB1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf78e0d0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790ce0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2094876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet tpm_tis.force=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8137816K/8379504K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 241688K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-11.
[ 0.000000] NR_IRQS:16640 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3220.131 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6440.26 BogoMIPS (lpj=12880524)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000050] AppArmor: AppArmor initialized
[ 0.000051] Yama: becoming mindful.
[ 0.000585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002025] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002645] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002655] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002849] Initializing cgroup subsys memory
[ 0.002854] Initializing cgroup subsys devices
[ 0.002856] Initializing cgroup subsys freezer
[ 0.002857] Initializing cgroup subsys blkio
[ 0.002858] Initializing cgroup subsys perf_event
[ 0.002860] Initializing cgroup subsys hugetlb
[ 0.002877] CPU: Physical Processor ID: 0
[ 0.002879] CPU: Processor Core ID: 0
[ 0.002882] mce: CPU supports 9 MCE banks
[ 0.002893] CPU0: Thermal monitoring enabled (TM1)
[ 0.002902] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002902] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002902] tlb_flushall_shift: 6
[ 0.002989] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.004044] ACPI: Core revision 20131115
[ 0.006515] ACPI: All ACPI Tables successfully acquired
[ 0.028801] ftrace: allocating 28552 entries in 112 pages
[ 0.040426] dmar: Host address width 39
[ 0.040427] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.040434] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f020fa
[ 0.040436] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.040441] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c9078010ef0462 ecap f020fe
[ 0.040443] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.040444] dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 0.040445] dmar: ATSR flags: 0x0
[ 0.040512] This system BIOS has enabled interrupt remapping
[ 0.040512] on a chipset that contains an erratum making that
[ 0.040512] feature unstable. To maintain system stability
[ 0.040512] interrupt remapping is being disabled. Please
[ 0.040512] contact your BIOS vendor for an update
[ 0.040548] Switched APIC routing to physical flat.
[ 0.040962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080646] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (fam: 06, model: 1a, stepping: 05)
[ 0.186301] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.186306] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.186307] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.186309] ... version: 3
[ 0.186310] ... bit width: 48
[ 0.186311] ... generic registers: 4
[ 0.186312] ... value mask: 0000ffffffffffff
[ 0.186313] ... max period: 000000007fffffff
[ 0.186314] ... fixed-purpose events: 3
[ 0.186315] ... event mask: 000000070000000f
[ 0.187852] x86: Booting SMP configuration:
[ 0.201098] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.187853] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.300926] x86: Booted up 1 node, 8 CPUs
[ 0.300930] smpboot: Total of 8 processors activated (51522.09 BogoMIPS)
[ 0.305359] devtmpfs: initialized
[ 0.307741] EVM: security.selinux
[ 0.307743] EVM: security.SMACK64
[ 0.307743] EVM: security.ima
[ 0.307744] EVM: security.capability
[ 0.307775] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.308481] pinctrl core: initialized pinctrl subsystem
[ 0.308525] regulator-dummy: no parameters
[ 0.308554] RTC time: 16:42:04, date: 01/29/15
[ 0.308580] NET: Registered protocol family 16
[ 0.308655] cpuidle: using governor ladder
[ 0.308656] cpuidle: using governor menu
[ 0.308683] ACPI: bus type PCI registered
[ 0.308684] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.308735] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.308736] PCI: not using MMCONFIG
[ 0.308737] PCI: Using configuration type 1 for base access
[ 0.309460] bio: create slab <bio-0> at 0
[ 0.309577] ACPI: Added _OSI(Module Device)
[ 0.309578] ACPI: Added _OSI(Processor Device)
[ 0.309579] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.309580] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.310867] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.314378] ACPI: SSDT 00000000bf78e210 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314585] ACPI: Dynamic OEM Table Load:
[ 0.314587] ACPI: SSDT (null) 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314651] ACPI: SSDT 00000000bf790660 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.314807] ACPI: Dynamic OEM Table Load:
[ 0.314809] ACPI: SSDT (null) 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.315050] ACPI: Interpreter enabled
[ 0.315056] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.315065] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.315066] ACPI: Using IOAPIC for interrupt routing
[ 0.315083] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.315905] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.326855] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.326926] ACPI: No dock devices found.
[ 0.331866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.331870] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.332044] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.332377] PCI host bridge to bus 0000:00
[ 0.332380] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.332381] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.332383] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.332384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.332385] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.332386] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.332388] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.332398] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.332444] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.332504] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.332552] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.332591] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.332615] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.332663] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.332701] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.332724] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.332772] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.332809] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.332839] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.332883] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.332921] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.332949] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.332993] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.333032] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.333067] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.333152] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.333236] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.333317] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.333411] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.333452] pci 0000:00:1a.0: reg 0x20: [io 0x8080-0x809f]
[ 0.333539] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.333573] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.333614] pci 0000:00:1a.1: reg 0x20: [io 0x8400-0x841f]
[ 0.333700] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.333731] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.333772] pci 0000:00:1a.2: reg 0x20: [io 0x8480-0x849f]
[ 0.333853] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.333892] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.333914] pci 0000:00:1a.7: reg 0x10: [mem 0xfbaf6000-0xfbaf63ff]
[ 0.334003] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.334047] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.334078] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.334095] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[ 0.334163] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.334233] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.334303] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.334349] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.334378] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.334443] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.334487] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.334520] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.334561] pci 0000:00:1d.0: reg 0x20: [io 0x8800-0x881f]
[ 0.334647] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.334676] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.334717] pci 0000:00:1d.1: reg 0x20: [io 0x8880-0x889f]
[ 0.334803] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.334830] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.334871] pci 0000:00:1d.2: reg 0x20: [io 0x8c00-0x8c1f]
[ 0.334956] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.334996] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.335019] pci 0000:00:1d.7: reg 0x10: [mem 0xfbafc000-0xfbafc3ff]
[ 0.335107] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.335150] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.335178] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.335255] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.335287] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.335367] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.335376] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.335383] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.335390] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.335482] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.335499] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.335510] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.335521] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.335531] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.335542] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.335552] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.335646] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.335663] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafe000-0xfbafe0ff 64bit]
[ 0.335685] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.335762] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.335779] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07]
[ 0.335790] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883]
[ 0.335800] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807]
[ 0.335811] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483]
[ 0.335821] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f]
[ 0.335832] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f]
[ 0.335964] pci 0000:08:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.335974] pci 0000:08:00.0: reg 0x10: [io 0xd880-0xd887]
[ 0.335980] pci 0000:08:00.0: reg 0x14: [io 0xd800-0xd803]
[ 0.335986] pci 0000:08:00.0: reg 0x18: [io 0xe080-0xe087]
[ 0.335992] pci 0000:08:00.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.335999] pci 0000:08:00.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.336005] pci 0000:08:00.0: reg 0x24: [mem 0xfbeef000-0xfbeef7ff]
[ 0.336012] pci 0000:08:00.0: reg 0x30: [mem 0xfbed0000-0xfbedffff pref]
[ 0.336040] pci 0000:08:00.0: PME# supported from D3hot
[ 0.336076] pci 0000:08:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.336085] pci 0000:08:00.1: reg 0x10: [io 0xe480-0xe487]
[ 0.336092] pci 0000:08:00.1: reg 0x14: [io 0xe400-0xe403]
[ 0.336098] pci 0000:08:00.1: reg 0x18: [io 0xec00-0xec07]
[ 0.336104] pci 0000:08:00.1: reg 0x1c: [io 0xe880-0xe883]
[ 0.336110] pci 0000:08:00.1: reg 0x20: [io 0xe800-0xe80f]
[ 0.336117] pci 0000:08:00.1: reg 0x24: [mem 0xfbeefc00-0xfbeefc0f]
[ 0.336123] pci 0000:08:00.1: reg 0x30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.336152] pci 0000:08:00.1: PME# supported from D3hot
[ 0.342309] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.342314] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.342318] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.342391] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.342406] pci 0000:07:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[ 0.342477] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 0.350316] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.350322] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.350389] pci 0000:06:00.0: [1002:5b62] type 00 class 0x030000
[ 0.350398] pci 0000:06:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.350405] pci 0000:06:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.350411] pci 0000:06:00.0: reg 0x18: [mem 0xd8000000-0xd800ffff]
[ 0.350431] pci 0000:06:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.350459] pci 0000:06:00.0: supports D1 D2
[ 0.350490] pci 0000:06:00.1: [1002:5b72] type 00 class 0x038000
[ 0.350498] pci 0000:06:00.1: reg 0x10: [mem 0xdc000000-0xdc00ffff]
[ 0.350549] pci 0000:06:00.1: supports D1 D2
[ 0.350572] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.350579] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.350581] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.350584] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.350588] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350620] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.350658] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.350714] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.350994] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.351307] pci 0000:02:00.0: reg 0x10: [mem 0xfbcdc000-0xfbcdffff 64bit]
[ 0.351447] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.352014] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]
[ 0.352790] pci 0000:02:00.0: supports D1 D2
[ 0.352791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.358411] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.358418] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.358421] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.358480] pci 0000:01:00.0: [13f6:0111] type 00 class 0x040100
[ 0.358499] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.358573] pci 0000:01:00.0: supports D1 D2
[ 0.358612] pci 0000:01:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.358631] pci 0000:01:03.0: reg 0x10: [mem 0xfbbfb800-0xfbbfbfff]
[ 0.358644] pci 0000:01:03.0: reg 0x14: [mem 0xfbbfc000-0xfbbfffff]
[ 0.358710] pci 0000:01:03.0: supports D1 D2
[ 0.358711] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.358772] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.358775] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.358782] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.358790] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.358792] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.358793] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.358794] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.358795] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.358797] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.359361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.359414] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.359458] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.359511] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.359563] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.359616] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.359667] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.359720] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.359799] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.359804] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.359826] Found 1 acpi root devices
[ 0.359885] vgaarb: setting as boot device: PCI:0000:06:00.0
[ 0.359886] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.359888] vgaarb: loaded
[ 0.359888] vgaarb: bridge control possible 0000:06:00.0
[ 0.359996] SCSI subsystem initialized
[ 0.360023] libata version 3.00 loaded.
[ 0.360036] ACPI: bus type USB registered
[ 0.360045] usbcore: registered new interface driver usbfs
[ 0.360051] usbcore: registered new interface driver hub
[ 0.360063] usbcore: registered new device driver usb
[ 0.360135] PCI: Using ACPI for IRQ routing
[ 0.365540] PCI: Discovered peer bus ff
[ 0.365541] PCI: root bus ff: using default resources
[ 0.365542] PCI: Probing PCI hardware (bus ff)
[ 0.365559] PCI host bridge to bus 0000:ff
[ 0.365561] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.365562] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.365563] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.365567] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.365593] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.365620] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.365643] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.365668] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.365692] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.365715] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.365739] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.365762] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.365786] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.365810] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.365833] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.365857] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.365880] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.365905] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.365930] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.365953] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.365976] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.366000] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.366032] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.366035] PCI: pci_cache_line_size set to 64 bytes
[ 0.366165] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.366167] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.366221] NetLabel: Initializing
[ 0.366222] NetLabel: domain hash size = 128
[ 0.366222] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.366232] NetLabel: unlabeled traffic allowed by default
[ 0.366350] hpet clockevent registered
[ 0.366358] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.366365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.366368] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.369566] Switched to clocksource hpet
[ 0.372871] AppArmor: AppArmor Filesystem Enabled
[ 0.372889] pnp: PnP ACPI init
[ 0.372898] ACPI: bus type PNP registered
[ 0.372944] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.372946] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.372947] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.372949] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.372950] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.372952] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.372954] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.372982] pnp 00:01: [dma 4]
[ 0.372995] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.373019] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373059] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.373080] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.373462] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.373464] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.373466] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373593] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.373595] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.373596] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.373598] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.373600] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.373601] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.373603] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373669] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.373718] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.373720] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373791] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.373793] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.373795] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373839] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.373842] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373964] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.373966] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.373967] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.373969] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.373971] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.373973] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.374082] pnp: PnP ACPI: found 12 devices
[ 0.374083] ACPI: bus type PNP unregistered
[ 0.380526] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.380528] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.380531] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.380542] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.380553] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.380555] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.380557] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.380558] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.380560] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.380562] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.380564] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.380566] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.380568] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.380570] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.380572] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.380575] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.380580] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.380583] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.380588] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.380590] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.380593] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.380596] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.380599] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.380606] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.380613] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.380619] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.380627] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.380634] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.380642] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.380648] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.380656] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.380663] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.380671] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.380677] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.380685] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.380695] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.380697] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.380698] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.380699] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.380700] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.380702] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.380703] pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
[ 0.380704] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.380706] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.380707] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.380708] pci_bus 0000:06: resource 1 [mem 0xd7f00000-0xdfffffff]
[ 0.380709] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.380711] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.380712] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.380713] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.380715] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.380716] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.380717] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.380719] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.380720] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.380721] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.380722] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.380724] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.380725] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.380726] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.380727] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.380730] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.380731] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.380752] NET: Registered protocol family 2
[ 0.380905] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.381039] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.381170] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.381186] TCP: reno registered
[ 0.381194] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.381220] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.381278] NET: Registered protocol family 1
[ 0.382739] pci 0000:06:00.0: Video device with shadowed ROM
[ 0.382790] PCI: CLS 256 bytes, default 64
[ 0.382822] Trying to unpack rootfs image as initramfs...
[ 0.720292] Freeing initrd memory: 26564K (ffff880034c0e000 - ffff8800365ff000)
[ 0.720336] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.720338] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.720593] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720598] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720606] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720614] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720622] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720630] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720637] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720644] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
[ 0.720686] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.720687] Scanning for low memory corruption every 60 seconds
[ 0.720946] Initialise system trusted keyring
[ 0.720983] audit: initializing netlink socket (disabled)
[ 0.720992] type=2000 audit(1422549723.580:1): initialized
[ 0.740260] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.741080] zbud: loaded
[ 0.741201] VFS: Disk quotas dquot_6.5.2
[ 0.741233] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.741586] fuse init (API version 7.22)
[ 0.741646] msgmni has been set to 15946
[ 0.741685] Key type big_key registered
[ 0.742252] Key type asymmetric registered
[ 0.742253] Asymmetric key parser 'x509' registered
[ 0.742273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.742319] io scheduler noop registered
[ 0.742320] io scheduler deadline registered (default)
[ 0.742337] io scheduler cfq registered
[ 0.742435] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.742494] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 0.742551] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.742608] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.742665] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.742711] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.742849] pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
[ 0.743011] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 0.743094] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.743114] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.743132] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.743150] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.743169] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.743178] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.743179] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.743180] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 0.743183] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.743188] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.743190] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.743192] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.743198] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.743199] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.743200] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.743202] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.743208] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.743211] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.743216] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.743219] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.743234] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.743241] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.743258] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.743260] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.743267] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.743275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.743310] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 174b ss_did 1000
[ 0.743338] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.743350] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 174b ss_did 1000
[ 0.743374] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.743377] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.743407] intel_idle: MWAIT substates: 0x1120
[ 0.743421] intel_idle: v0.4 model 0x1A
[ 0.743422] intel_idle: lapic_timer_reliable_states 0x2
[ 0.743593] ipmi message handler version 39.2
[ 0.743638] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.743641] ACPI: Power Button [PWRB]
[ 0.743662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.743664] ACPI: Power Button [PWRF]
[ 0.744043] ACPI: Invalid active0 threshold
[ 0.744243] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.744245] ACPI: Thermal Zone [THRM] (22 C)
[ 0.744259] GHES: HEST is not enabled!
[ 0.744312] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.745432] Linux agpgart interface v0.103
[ 0.745549] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.745608] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.745610] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.745658] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.745659] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.754634] brd: module loaded
[ 0.755161] loop: module loaded
[ 0.755242] ata_piix 0000:00:1f.2: version 2.13
[ 0.755335] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.756076] scsi0 : ata_piix
[ 0.756134] scsi1 : ata_piix
[ 0.756159] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.756167] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.756253] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.756889] scsi2 : ata_piix
[ 0.756984] scsi3 : ata_piix
[ 0.757006] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.757013] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.757185] libphy: Fixed MDIO Bus: probed
[ 0.757239] tun: Universal TUN/TAP device driver, 1.6
[ 0.757240] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.757277] PPP generic driver version 2.4.2
[ 0.757309] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.757311] ehci-pci: EHCI PCI platform driver
[ 0.757424] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.757428] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.757443] ehci-pci 0000:00:1a.7: debug port 1
[ 0.761348] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.761362] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbaf6000
[ 0.769565] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.769622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.769624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.769625] usb usb1: Product: EHCI Host Controller
[ 0.769626] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.769627] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.769699] hub 1-0:1.0: USB hub found
[ 0.769705] hub 1-0:1.0: 6 ports detected
[ 0.769914] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.769919] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.769933] ehci-pci 0000:00:1d.7: debug port 1
[ 0.773831] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.773845] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbafc000
[ 0.785563] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.785604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.785606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.785607] usb usb2: Product: EHCI Host Controller
[ 0.785608] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.785609] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.785740] hub 2-0:1.0: USB hub found
[ 0.785744] hub 2-0:1.0: 6 ports detected
[ 0.785854] ehci-platform: EHCI generic platform driver
[ 0.785859] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.785859] ohci-pci: OHCI PCI platform driver
[ 0.785866] ohci-platform: OHCI generic platform driver
[ 0.785870] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.785969] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.785972] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.786010] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008080
[ 0.786042] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.786043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.786044] usb usb3: Product: UHCI Host Controller
[ 0.786046] usb usb3: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.786047] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.786229] hub 3-0:1.0: USB hub found
[ 0.786235] hub 3-0:1.0: 2 ports detected
[ 0.786377] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.786381] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.786421] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008400
[ 0.786452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.786454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.786455] usb usb4: Product: UHCI Host Controller
[ 0.786456] usb usb4: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.786457] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.786642] hub 4-0:1.0: USB hub found
[ 0.786648] hub 4-0:1.0: 2 ports detected
[ 0.786797] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.786800] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.786828] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008480
[ 0.786861] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.786863] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.786864] usb usb5: Product: UHCI Host Controller
[ 0.786865] usb usb5: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.786866] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.787047] hub 5-0:1.0: USB hub found
[ 0.787053] hub 5-0:1.0: 2 ports detected
[ 0.787205] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.787208] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.787236] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008800
[ 0.787269] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787271] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787272] usb usb6: Product: UHCI Host Controller
[ 0.787274] usb usb6: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.787275] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.787447] hub 6-0:1.0: USB hub found
[ 0.787453] hub 6-0:1.0: 2 ports detected
[ 0.787603] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.787607] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.787635] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008880
[ 0.787666] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787668] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787669] usb usb7: Product: UHCI Host Controller
[ 0.787670] usb usb7: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.787672] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.787854] hub 7-0:1.0: USB hub found
[ 0.787860] hub 7-0:1.0: 2 ports detected
[ 0.788004] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.788008] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.788035] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008c00
[ 0.788068] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.788070] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788071] usb usb8: Product: UHCI Host Controller
[ 0.788072] usb usb8: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.788073] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.788257] hub 8-0:1.0: USB hub found
[ 0.788263] hub 8-0:1.0: 2 ports detected
[ 0.788362] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.788366] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[ 0.788484] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 0.788488] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 0.788493] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.788499] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.788503] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.788507] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.788512] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.788516] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.788608] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.788609] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788611] usb usb9: Product: xHCI Host Controller
[ 0.788612] usb usb9: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.788613] usb usb9: SerialNumber: 0000:07:00.0
[ 0.788726] hub 9-0:1.0: USB hub found
[ 0.788734] hub 9-0:1.0: 2 ports detected
[ 0.788785] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.788788] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[ 0.791855] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.791857] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.791858] usb usb10: Product: xHCI Host Controller
[ 0.791859] usb usb10: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.791860] usb usb10: SerialNumber: 0000:07:00.0
[ 0.791965] hub 10-0:1.0: USB hub found
[ 0.791975] hub 10-0:1.0: 2 ports detected
[ 0.797745] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.798184] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.798188] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.798396] mousedev: PS/2 mouse device common for all mice
[ 0.798664] rtc_cmos 00:02: RTC can wake from S4
[ 0.798803] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.798838] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.798879] device-mapper: uevent: version 1.0.3
[ 0.798980] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.798985] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.799055] TCP: cubic registered
[ 0.799114] NET: Registered protocol family 10
[ 0.799239] NET: Registered protocol family 17
[ 0.799244] Key type dns_resolver registered
[ 0.799527] Loading compiled-in X.509 certificates
[ 0.800278] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[ 0.800284] registered taskstats version 1
[ 0.802555] Key type trusted registered
[ 0.804929] Key type encrypted registered
[ 0.807498] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.807503] IMA: No TPM chip found, activating TPM-bypass!
[ 0.808144] regulator-dummy: disabling
[ 0.808287] Magic number: 15:529:743
[ 0.808511] rtc_cmos 00:02: setting system clock to 2015-01-29 16:42:04 UTC (1422549724)
[ 0.810944] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.810946] EDD information not available.
[ 0.810961] PM: Hibernation image not present or could not be loaded.
[ 1.088388] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.102943] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.408224] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.408240] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.549570] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.549586] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.549600] ata2.01: link offline, clearing class 3 to NONE
[ 1.557722] ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 1.573817] ata2.00: configured for UDMA/100
[ 1.575427] scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 1.578056] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.578058] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.578223] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.578329] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.579697] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.579699] Write protecting the kernel read-only data: 12288k
[ 1.581346] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.582775] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.595990] systemd-udevd[165]: starting version 204
[ 1.601594] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1.607995] scsi4 : pata_marvell
[ 1.608056] scsi5 : pata_marvell
[ 1.608076] ata5: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe800 irq 17
[ 1.608078] ata6: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe808 irq 17
[ 1.609222] ahci 0000:08:00.0: version 3.0
[ 1.609277] ahci 0000:08:00.0: irq 55 for MSI/MSI-X
[ 1.609286] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS
[ 1.611553] [drm] Initialized drm 1.1.0 20060810
[ 1.616514] sky2: driver version 1.30
[ 1.616794] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.617240] sky2 0000:02:00.0: irq 56 for MSI/MSI-X
[ 1.618245] sky2 0000:02:00.0 eth0: addr dc:9c:52:00:04:9d
[ 1.621540] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.621543] ahci 0000:08:00.0: flags: 64bit ncq fbs pio
[ 1.623178] scsi6 : ahci
[ 1.623275] scsi7 : ahci
[ 1.623347] scsi8 : ahci
[ 1.623435] scsi9 : ahci
[ 1.623504] scsi10 : ahci
[ 1.623568] scsi11 : ahci
[ 1.623648] scsi12 : ahci
[ 1.623729] scsi13 : ahci
[ 1.623769] ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 55
[ 1.623772] ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 55
[ 1.623774] ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 55
[ 1.623776] ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 55
[ 1.623778] ata11: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 55
[ 1.623781] ata12: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 55
[ 1.623783] ata13: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 55
[ 1.623785] ata14: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 55
[ 1.639847] [drm] radeon kernel modesetting enabled.
[ 1.640232] [drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x174B:0x0490).
[ 1.640253] [drm] register mmio base: 0xD8000000
[ 1.640254] [drm] register mmio size: 65536
[ 1.640328] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.640334] radeon 0000:06:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.640337] radeon 0000:06:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.640343] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.640345] [drm] RAM width 128bits DDR
[ 1.640515] [TTM] Zone kernel: Available graphics memory: 4083616 kiB
[ 1.640518] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.640519] [TTM] Initializing pool allocator
[ 1.640524] [TTM] Initializing DMA pool allocator
[ 1.640546] [drm] radeon: 256M of VRAM memory ready
[ 1.640549] [drm] radeon: 512M of GTT memory ready.
[ 1.640563] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.640900] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.641401] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.641414] radeon 0000:06:00.0: WB enabled
[ 1.641416] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff88022e486000
[ 1.641417] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.641418] [drm] Driver supports precise vblank timestamp query.
[ 1.641434] radeon 0000:06:00.0: irq 57 for MSI/MSI-X
[ 1.641440] radeon 0000:06:00.0: radeon: using MSI.
[ 1.641455] [drm] radeon: irq initialized.
[ 1.641459] [drm] Loading R300 Microcode
[ 1.641749] [drm] radeon: ring at 0x00000000A0001000
[ 1.641768] [drm] ring test succeeded in 1 usecs
[ 1.641994] [drm] ib test succeeded in 0 usecs
[ 1.642168] [drm] Radeon Display Connectors
[ 1.642169] [drm] Connector 0:
[ 1.642170] [drm] VGA-1
[ 1.642171] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.642172] [drm] Encoders:
[ 1.642173] [drm] CRT1: INTERNAL_DAC1
[ 1.642173] [drm] Connector 1:
[ 1.642174] [drm] DVI-I-1
[ 1.642175] [drm] HPD1
[ 1.642176] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.642177] [drm] Encoders:
[ 1.642177] [drm] CRT2: INTERNAL_DAC2
[ 1.642178] [drm] DFP1: INTERNAL_TMDS1
[ 1.642179] [drm] Connector 2:
[ 1.642179] [drm] SVIDEO-1
[ 1.642180] [drm] Encoders:
[ 1.642181] [drm] TV1: INTERNAL_DAC2
[ 1.677668] firewire_ohci 0000:01:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.699359] [drm] fb mappable at 0xC00C0000
[ 1.699360] [drm] vram apper at 0xC0000000
[ 1.699361] [drm] size 5242880
[ 1.699362] [drm] fb depth is 24
[ 1.699362] [drm] pitch is 5120
[ 1.699583] fbcon: radeondrmfb (fb0) is primary device
[ 1.717504] tsc: Refined TSC clocksource calibration: 3219.944 MHz
[ 1.751122] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[ 1.751123] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.751125] usb 2-3: Product: 802.11 n WLAN
[ 1.751126] usb 2-3: Manufacturer: Ralink
[ 1.751127] usb 2-3: SerialNumber: 1.0
[ 1.754241] Console: switching to colour frame buffer device 160x64
[ 1.758604] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 1.758605] radeon 0000:06:00.0: registered panic notifier
[ 1.758608] [drm] Initialized radeon 2.36.0 20080528 for 0000:06:00.0 on minor 0
[ 1.941690] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.941711] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.941731] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.941792] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.941812] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.942063] ata14.00: configured for UDMA/66
[ 1.945564] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.949652] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.949690] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.949714] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.950855] ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 1.950859] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.951756] ata7.00: configured for UDMA/133
[ 1.952145] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 1.952414] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.952416] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.952421] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.952620] sd 6:0:0:0: [sda] Write Protect is off
[ 1.952625] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.952784] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.957941] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.958168] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 2.031971] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.033689] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.177592] firewire_core 0000:01:03.0: created device fw0: GUID f698f698fbbf5e21, S400
[ 2.249675] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.418037] usb 3-2: New USB device found, idVendor=1631, idProduct=a510
[ 2.418041] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.418045] usb 3-2: Product: USB HUB Keyboard
[ 2.418047] usb 3-2: Manufacturer: Chicony
[ 2.420064] hub 3-2:1.0: USB hub found
[ 2.422020] hub 3-2:1.0: 5 ports detected
[ 2.423016] hub 3-2:1.0: insufficient power available to use all downstream ports
[ 2.665652] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.717997] Switched to clocksource tsc
[ 2.818244] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.818248] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.061573] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 3.356567] random: nonblocking pool is initialized
[ 3.760040] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.432157] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.471344] systemd-udevd[387]: starting version 204
[ 12.620404] lp: driver loaded but no devices found
[ 12.648398] EDAC MC: Ver: 3.0.0
[ 12.650430] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 12.650470] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 12.650569] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 12.662204] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
[ 12.676588] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 12.676590] SKU: port_connectivity=0x1
[ 12.676591] SKU: enable_pcbeep=0x0
[ 12.676592] SKU: check_sum=0x00000005
[ 12.676593] SKU: customization=0x000000e6
[ 12.676594] SKU: external_amp=0x0
[ 12.676595] SKU: platform_type=0x0
[ 12.676596] SKU: swap=0x0
[ 12.676597] SKU: override=0x1
[ 12.677681] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.677684] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.677686] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.677687] mono: mono_out=0x0
[ 12.677688] dig-out=0x1e/0x0
[ 12.677689] inputs:
[ 12.677690] Front Mic=0x19
[ 12.677692] Rear Mic=0x18
[ 12.677693] Line=0x1a
[ 12.677694] dig-in=0x1f
[ 12.677695] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 12.677696] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 12.691997] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.692042] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.692082] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.692116] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.692149] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.692185] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 12.692221] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 12.692417] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 12.692422] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.692443] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.695808] Bluetooth: Core ver 2.17
[ 12.695820] NET: Registered protocol family 31
[ 12.695821] Bluetooth: HCI device and connection manager initialized
[ 12.695826] Bluetooth: HCI socket layer initialized
[ 12.695827] Bluetooth: L2CAP socket layer initialized
[ 12.695828] ppdev: user-space parallel port driver
[ 12.695831] Bluetooth: SCO socket layer initialized
[ 12.697832] usbcore: registered new interface driver btusb
[ 12.712009] kvm: disabled by bios
[ 12.735955] type=1400 audit(1422549736.424:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=530 comm="apparmor_parser"
[ 12.735961] type=1400 audit(1422549736.424:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser"
[ 12.735966] type=1400 audit(1422549736.424:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[ 12.736420] type=1400 audit(1422549736.424:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser"
[ 12.736426] type=1400 audit(1422549736.424:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[ 12.736660] type=1400 audit(1422549736.424:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[ 12.745583] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 12.751169] type=1400 audit(1422549736.440:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=560 comm="apparmor_parser"
[ 12.751176] type=1400 audit(1422549736.440:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560 comm="apparmor_parser"
[ 12.751182] type=1400 audit(1422549736.440:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=560 comm="apparmor_parser"
[ 12.751611] type=1400 audit(1422549736.440:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560 comm="apparmor_parser"
[ 12.973735] cfg80211: Calling CRDA to update world regulatory domain
[ 13.046359] cfg80211: World regulatory domain updated:
[ 13.046362] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.046363] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.046364] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.046365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.046366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.046367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.521454] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 17.353795] init: failsafe main process (778) killed by TERM signal
[ 17.744722] audit_printk_skb: 129 callbacks suppressed
[ 17.744725] type=1400 audit(1422549741.436:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.744731] type=1400 audit(1422549741.436:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=944 comm="apparmor_parser"
[ 17.754388] init: cups main process (933) killed by HUP signal
[ 17.754396] init: cups main process ended, respawning
[ 17.760595] type=1400 audit(1422549741.452:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.761566] type=1400 audit(1422549741.452:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=944 comm="apparmor_parser"
[ 17.776675] type=1400 audit(1422549741.468:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.776684] type=1400 audit(1422549741.468:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=944 comm="apparmor_parser"
[ 17.792654] type=1400 audit(1422549741.484:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.794049] type=1400 audit(1422549741.484:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.794053] type=1400 audit(1422549741.484:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=944 comm="apparmor_parser"
[ 17.808659] type=1400 audit(1422549741.500:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=944 comm="apparmor_parser"
[ 17.962947] Bluetooth: RFCOMM TTY layer initialized
[ 17.962955] Bluetooth: RFCOMM socket layer initialized
[ 17.962960] Bluetooth: RFCOMM ver 1.11
[ 17.977940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.977943] Bluetooth: BNEP filters: protocol multicast
[ 17.977949] Bluetooth: BNEP socket layer initialized
[ 18.172601] usb 8-2: device descriptor read/64, error -110
[ 18.216656] sky2 0000:02:00.0 eth0: enabling interface
[ 18.217426] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.221077] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.253006] init: gdm main process (1118) killed by TERM signal
[ 19.634320] init: samba-ad-dc main process (1275) terminated with status 1
[ 21.219754] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 21.219776] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.806180] init: plymouth-upstart-bridge main process ended, respawning
[ 22.810976] init: plymouth-upstart-bridge main process (1456) terminated with status 1
[ 22.810987] init: plymouth-upstart-bridge main process ended, respawning
[ 23.102539] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.104919] vboxdrv: Found 8 processor cores.
[ 23.105075] vboxdrv: fAsync=0 offMin=0x1e6 offMax=0x1d82
[ 23.105130] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.105131] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 23.311801] vboxpci: IOMMU not found (not registered)
[ 25.705606] init: plymouth-stop pre-start process (1648) terminated with status 1
[ 33.387846] usb 8-2: device descriptor read/64, error -110
[ 33.603828] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 33.746888] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 33.775087] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 33.778271] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 33.778458] usbcore: registered new interface driver rt2800usb
[ 33.795896] systemd-udevd[412]: renamed network interface wlan0 to wlan1
[ 33.798969] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 33.847847] usb 8-2: new full-speed USB device number 3 using uhci_hcd
[ 33.977171] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 34.213492] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 34.214703] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 47.670212] audit_printk_skb: 15 callbacks suppressed
[ 47.670214] type=1400 audit(1422549771.366:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2257 comm="apparmor_parser"
[ 47.670219] type=1400 audit(1422549771.366:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2257 comm="apparmor_parser"
[ 47.670535] type=1400 audit(1422549771.366:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2257 comm="apparmor_parser"
[ 49.155680] usb 8-2: device descriptor read/64, error -110
[ 64.363050] usb 8-2: device descriptor read/64, error -110
[ 64.578934] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 74.981109] usb 8-2: device not accepting address 4, error -110
[ 75.093174] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 85.495302] usb 8-2: device not accepting address 5, error -110
[ 85.495365] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 85.968668] usb 3-2.1: new low-speed USB device number 3 using uhci_hcd
[ 86.127665] usb 3-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 86.127670] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.127673] usb 3-2.1: Product: IR Receiver
[ 86.127676] usb 3-2.1: Manufacturer: Chicony
[ 86.220659] usb 3-2.2: new low-speed USB device number 4 using uhci_hcd
[ 86.375656] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
[ 86.375661] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.375664] usb 3-2.2: Product: Basic Optical Mouse
[ 86.375667] usb 3-2.2: Manufacturer: Microsoft
[ 86.468653] usb 3-2.3: new full-speed USB device number 5 using uhci_hcd
[ 86.608650] usb 3-2.3: New USB device found, idVendor=08ff, idProduct=2580
[ 86.608655] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 86.608659] usb 3-2.3: Product: Fingerprint Sensor
[ 86.700644] usb 3-2.5: new full-speed USB device number 6 using uhci_hcd
[ 86.850643] usb 3-2.5: New USB device found, idVendor=1631, idProduct=0510
[ 86.850648] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.850651] usb 3-2.5: Product: USB HUB Keyboard
[ 86.850653] usb 3-2.5: Manufacturer: Chicony
[ 86.872253] hidraw: raw HID events driver (C) Jiri Kosina
[ 86.928674] usbcore: registered new interface driver usbhid
[ 86.928676] usbhid: USB HID core driver
[ 86.955669] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input12
[ 86.955892] hid-generic 0003:1631:0006.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1a.0-2.1/input0
[ 86.956021] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input13
[ 86.956144] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
[ 86.956293] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.0/input/input14
[ 86.956377] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input0
[ 86.960631] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.1/input/input15
[ 86.960727] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input1
[ 166.778468] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 166.835218] ISOFS: changing to secondary rootSI vous voulez d'autres commandes vous pouvez le les citer, je serai de retour dans 15-20min.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne