Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#76 Le 10/12/2014, à 14:56

F50

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

fcn50 a écrit :

Quel splash ? T'as installé catalyst comment et xorg.conf c'est bien créé ?

Tu as déjà essayé de viré xserver-xporg-video-intel tout en ayant catalyst et un xorg.conf en place ?

#77 Le 10/12/2014, à 16:21

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

L'écran Xubuntu, puis direct écran noir.
J'ai installé via Gdebi après avoir téléchargé le 14.12 en .deb sur le site amd
J'avais pas regardé pour Xorg.conf (je suis revenu à intel, là car c'est mon ordi commercial de prod et que je bosse en même temps tongue )
Comment proposes-tu le déroulement ?

[edit]

:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type

Dernière modification par nam1962 (Le 10/12/2014, à 18:15)


[ Modéré ]

Hors ligne

#78 Le 10/12/2014, à 18:01

Caribou22

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

nany a écrit :

De solution simple, non, il n’y en a pas. Suis le premier lien donné par nam1962. À savoir que, pour le téléchargement du driver sur le site d’AMD, il y en a un tout récent comme je l’ai signalé ci-dessus.
Peut-être que pour toi ça marchera comme pour les autres. Pour nam1962, il semble que c’est la commande aticonfig qui le fait freezer à chaque fois pour quelque obscure raison.

Comme je n'y connais rien, je ne vais pas surcharger ce fil, et déterrer le mien : http://forum.ubuntu-fr.org/viewtopic.ph … #p18526091
En tout cas, je suis ravi qu'une solution existe depuis peu big_smile A l'époque, c'était l'impasse totale.

Hors ligne

#79 Le 10/12/2014, à 18:43

F50

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Comment déjà par désactiver cette cosmétique contre productive de splash au boot pour savoir où il bute. Puis n'installe pas avec les .deb mais avec celui du site AMD linux x86_64 pas ceux pour buntu. Regarde bien le terminal pendant et après l'install pour contrôler s'il y a des erreurs, au cas, poste-les mais avant toute install catalyst fait :

sudo apt-get remove --purge fglrx fglrx-amdcccle fglrx-updates fglrx-amdcccle-updates

Ensuite :

sudo apt-get install dh-make dh-modaliases execstack libc6-i386 lib32gcc1

Une fois fait, lance l'install .run avec l'option --buildandinstallpkg à la fin, donc:

sudo ./blablabla.run --buildandinstallpkg

Quant l'install est terminée tu contrôles si tu as un xorg.conf, si non, tu tapes :

sudo aticonfig --initial -f

Et tu contrôles à nouveau, s'il est présent tu reboot.

#80 Le 10/12/2014, à 21:10

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Oki !
Je fais vendredi soir ou samedi (d'ici là, j'ai plusieurs urgences de startuper : aurai l'air fin si je dois passer mon temps à faire de la fresh install à la place wink )


[ Modéré ]

Hors ligne

#81 Le 12/12/2014, à 21:01

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Bon, ça commence mal : http://support.amd.com/en-us/kb-article … river.aspx
J'ai tenté l'installation des paquets préconisés et :

:~$ sudo apt-get install gimp-help-en gimp-help-common XFree86-Mesa-libGL libstdc++ libgcc XFree86-libs fontconfig freetype zlib gcc
[sudo] password for asatysco2: 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de libstdc++6-4.7-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.8-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-powerpc-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-arm64-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.8-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-arm64-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dev-armel-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-ppc64el-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-pic-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-pic pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-pic-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-powerpc-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-pic-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-ppc64el-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-powerpc-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-pic-powerpc-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-dev-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-dev-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-ppc64el-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-pic-ppc64el-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de pd-libstdcpp pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-pic-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++3.0-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dev-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-pic-arm64-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.8-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.8-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-armel-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.8-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-pic pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-pic-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-pic-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++2.8-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-pic pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-dev-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++2.10-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-armel-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-pic-armel-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-armel-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-pic-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5-3.3-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6--dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.5-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-dev-arm64-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++2.9-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-pic-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dbg pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++-4.8-dev-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++5 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-dbg-ppc64el-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.0-dbg-arm64-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++2.9-glibc2.1-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.1-dbg-armhf-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.7-dev-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.4-dev pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg-armel-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.2-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.3-doc pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-4.6-pic pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dev-armhf-dcv1 pour l'expression rationnelle « libstdc+ »
Note : sélection de libstdc++6-dbg-powerpc-cross pour l'expression rationnelle « libstdc+ »
Note : sélection de « libstdc++-4.8-dev-arm64-cross » au lieu de « libstdc++-dev-arm64-cross »
Note : sélection de « libstdc++-4.8-dev-arm64-cross » au lieu de « libstdc++-dev-arm64-dcv1 »
Note : sélection de « libstdc++-4.8-dev-powerpc-cross » au lieu de « libstdc++-dev-powerpc-cross »
Note : sélection de « libstdc++-4.8-dev-powerpc-cross » au lieu de « libstdc++-dev-powerpc-dcv1 »
Note : sélection de « libstdc++-4.8-dev-ppc64el-cross » au lieu de « libstdc++-dev-ppc64el-cross »
Note : sélection de « libstdc++-4.8-dev-ppc64el-cross » au lieu de « libstdc++-dev-ppc64el-dcv1 »
Note : sélection de « libstdc++6-arm64-cross » au lieu de « libstdc++6-arm64-dcv1 »
Note : sélection de « libstdc++6-armhf-cross » au lieu de « libstdc++6-armhf-dcv1 »
Note : sélection de « libstdc++6-powerpc-cross » au lieu de « libstdc++6-powerpc-dcv1 »
Note : sélection de « libstdc++6-ppc64el-cross » au lieu de « libstdc++6-ppc64el-dcv1 »
Note : sélection de « libstdc++-4.8-pic-arm64-cross » au lieu de « libstdc++-pic-arm64-dcv1 »
Note : sélection de « libstdc++-4.8-pic-armhf-cross » au lieu de « libstdc++-pic-armhf-dcv1 »
Note : sélection de « libstdc++-4.8-pic-powerpc-cross » au lieu de « libstdc++-pic-powerpc-dcv1 »
Note : sélection de « libstdc++-4.8-pic-ppc64el-cross » au lieu de « libstdc++-pic-ppc64el-dcv1 »
Note : sélection de « libstdc++6-4.7-dbg-armel-cross » au lieu de « libstdc++6-dbg-armel-dcv1 »
Note : sélection de « libstdc++6-4.7-dev-armel-cross » au lieu de « libstdc++-dev-armel-cross »
Note : sélection de « libstdc++6-4.7-dev-armel-cross » au lieu de « libstdc++-dev-armel-dcv1 »
Note : sélection de « libstdc++6-4.7-dev-armel-cross » au lieu de « libstdc++6-dev-armel-dcv1 »
Note : sélection de « libstdc++6-4.7-dev-armhf-cross » au lieu de « libstdc++6-dev-armhf-dcv1 »
Note : sélection de « libstdc++6-4.7-pic-armel-cross » au lieu de « libstdc++6-pic-armel-dcv1 »
Note : sélection de « libstdc++6-4.7-pic-armhf-cross » au lieu de « libstdc++6-pic-armhf-dcv1 »
Note : sélection de « libstdc++6-4.8-dbg-arm64-cross » au lieu de « libstdc++6-dbg-arm64-dcv1 »
Note : sélection de « libstdc++6-4.8-dbg-powerpc-cross » au lieu de « libstdc++6-dbg-powerpc-dcv1 »
Note : sélection de « libstdc++6-4.8-dbg-ppc64el-cross » au lieu de « libstdc++6-dbg-ppc64el-dcv1 »
Note : sélection de « libstdc++6-armel-cross » au lieu de « libstdc++6-armel-dcv1 »
E: Impossible de trouver le paquet XFree86-Mesa-libGL
E: Impossible de trouver le paquet libgcc
E: Impossible de trouver le paquet XFree86-libs
E: Impossible de trouver le paquet freetype
E: Impossible de trouver le paquet zlib

[ Modéré ]

Hors ligne

#82 Le 13/12/2014, à 08:20

F50

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Mais nam, je t'ai écris quels paquets installer : Deuxième commande au #33, oublie la doc AMD et recommence.

#83 Le 13/12/2014, à 10:12

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Bon, je mets les résultats au fil de l'eau :

:~$ sudo apt-get remove --purge fglrx fglrx-amdcccle fglrx-updates fglrx-amdcccle-updates

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Package 'fglrx' is not installed, so not removed
Package 'fglrx-amdcccle' is not installed, so not removed
Package 'fglrx-amdcccle-updates' is not installed, so not removed
Package 'fglrx-updates' is not installed, so not removed
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
:~$ sudo apt-get install dh-make dh-modaliases execstack libc6-i386 lib32gcc1
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
dh-make est déjà la plus récente version disponible.
execstack est déjà la plus récente version disponible.
dh-modaliases est déjà la plus récente version disponible.
Les NOUVEAUX paquets suivants seront installés :
  lib32gcc1 libc6-i386
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 2 263 ko dans les archives.
Après cette opération, 10,0 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] 
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libc6-i386 amd64 2.19-0ubuntu6.4 [2 215 kB]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main lib32gcc1 amd64 1:4.9.1-0ubuntu1 [47,6 kB]
2 263 ko réceptionnés en 1s (1 166 ko/s)
Sélection du paquet libc6-i386 précédemment désélectionné.
(Lecture de la base de données... 234360 fichiers et répertoires déjà installés.)
Préparation du décompactage de .../libc6-i386_2.19-0ubuntu6.4_amd64.deb ...
Décompactage de libc6-i386 (2.19-0ubuntu6.4) ...
Remplacé par des fichiers de paquets installés libc6:i386 (2.19-0ubuntu6.4) ...
Sélection du paquet lib32gcc1 précédemment désélectionné.
Préparation du décompactage de .../lib32gcc1_1%3a4.9.1-0ubuntu1_amd64.deb ...
Décompactage de lib32gcc1 (1:4.9.1-0ubuntu1) ...
Paramétrage de libc6-i386 (2.19-0ubuntu6.4) ...
Paramétrage de lib32gcc1 (1:4.9.1-0ubuntu1) ...
Traitement déclenché pour  libc-bin (2.19-0ubuntu6.4) ...

Ah... truc bizarre : ça fait 5 minutes que c'est bloqué :

:~$ sudo /home/moimeme/Bureau/fglrx-14.501.1003/amd-driver-installer-14.501.1003-x86.x86_64.run --buildandinstallpkg
Created directory fglrx-install.VGlred
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-14.501.1003..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
=====================================================================
 AMD Catalyst(TM) Proprietary Driver Installer/Packager 
=====================================================================
Generating and Installing package: Ubuntu/trusty

...ah non, ça a continué, mais à priori ça a surtout foiré !

Package /home/asatysco2/fglrx-core_14.501-0ubuntu1_amd64.deb has been successfull


 y generated
Package /home/asatysco2/fglrx_14.501-0ubuntu1_amd64.deb has been successfully generated
Package /home/asatysco2/fglrx-dev_14.501-0ubuntu1_amd64.deb has been successfully generated
Package /home/asatysco2/fglrx-amdcccle_14.501-0ubuntu1_amd64.deb has been successfully generated
Selecting previously unselected package fglrx-core.
dpkg: regarding fglrx-core_14.501-0ubuntu1_amd64.deb containing fglrx-core:
 fglrx-core conflicts with libopencl1
  ocl-icd-libopencl1:i386 provides libopencl1 and is present and installed.
  ocl-icd-libopencl1:amd64 provides libopencl1 and is present and installed.

dpkg: error processing archive fglrx-core_14.501-0ubuntu1_amd64.deb (--install):
 conflicting packages - not installing fglrx-core
Selecting previously unselected package fglrx.
(Reading database ... 234668 files and directories currently installed.)
Preparing to unpack fglrx_14.501-0ubuntu1_amd64.deb ...
Unpacking fglrx (2:14.501-0ubuntu1) ...
Selecting previously unselected package fglrx-amdcccle.
Preparing to unpack fglrx-amdcccle_14.501-0ubuntu1_amd64.deb ...
Unpacking fglrx-amdcccle (2:14.501-0ubuntu1) ...
dpkg: dependency problems prevent configuration of fglrx:
 fglrx depends on fglrx-core; however:
  Package fglrx-core is not installed.

dpkg: error processing package fglrx (--install):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of fglrx-amdcccle:
 fglrx-amdcccle depends on fglrx; however:
  Package fglrx is not configured yet.

dpkg: error processing package fglrx-amdcccle (--install):
 dependency problems - leaving unconfigured
Processing triggers for gnome-menus (3.10.1-0ubuntu2) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu1) ...
Processing triggers for mime-support (3.54ubuntu1) ...
Processing triggers for ureadahead (0.100.0-16) ...
ureadahead will be reprofiled on next reboot
Errors were encountered while processing:
 fglrx-core_14.501-0ubuntu1_amd64.deb
 fglrx
 fglrx-amdcccle
fglrx-core_14.501-0ubuntu1_amd64.deb fglrx_14.501-0ubuntu1_amd64.deb fglrx-amdcccle_14.501-0ubuntu1_amd64.deb
Cleaning up removed packages
Unable to open /etc/ati/control, please reinstall the driver.
aticonfig: No supported adapters detected
Removing temporary directory: fglrx-install.VGlred

..donc, par précaution (je dois aussi bosser ce samedi) je vire l'install :

:~$ sudo apt-get remove --purge fglrx fglrx-amdcccle fglrx-updates fglrx-amdcccle-updates
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Package 'fglrx-amdcccle-updates' is not installed, so not removed
Package 'fglrx-updates' is not installed, so not removed
Les paquets suivants seront ENLEVÉS :
  fglrx* fglrx-amdcccle*
0 mis à jour, 0 nouvellement installés, 2 à enlever et 0 non mis à jour.
2 partiellement installés ou enlevés.
Après cette opération, 178 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] 
(Lecture de la base de données... 234851 fichiers et répertoires déjà installés.)
Suppression de fglrx-amdcccle (2:14.501-0ubuntu1) ...
Suppression de fglrx (2:14.501-0ubuntu1) ...
Purging configuration files for fglrx (2:14.501-0ubuntu1) ...
dpkg : avertissement : lors de la suppression de fglrx, le répertoire « /etc/ati » n'était pas vide, donc il n'a pas été supprimé
dpkg : avertissement : lors de la suppression de fglrx, le répertoire « /usr/lib/x86_64-linux-gnu/xorg/extra-modules » n'était pas vide, donc il n'a pas été supprimé
Traitement déclenché pour  libc-bin (2.19-0ubuntu6.4) ...

..bref, ça roule carré... Que faire ensuite ?

Penses tu que je doive m'inspirer de ce fil : http://askubuntu.com/questions/449507/n … lling-wine

[edit j'ai essayé après

sudo apt-get install ocl-icd-opencl-dev

l'install a foiré aussi, j'ai donc tout annulé, suis au point de départ.
J'ai quand même souscrit à https://bugs.launchpad.net/ubuntu/+sour … ug/1376587
Je vire wine et retente....
Rien ne change
Je vire le lib litigieux et je retente :

@ordi2:~$ sudo apt-get remove --purge ocl-icd-libopencl1
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
  ocl-icd-libopencl1*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 134 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] 
(Lecture de la base de données... 231153 fichiers et répertoires déjà installés.)
Suppression de ocl-icd-libopencl1:amd64 (2.1.3-4) ...
Purging configuration files for ocl-icd-libopencl1:amd64 (2.1.3-4) ...
Traitement déclenché pour  man-db (2.6.7.1-1ubuntu1) ...
Traitement déclenché pour  doc-base (0.10.5) ...
Traitement en cours 1 removed doc-base file...
Enregistrement des documents avec scrollkeeper...
Traitement déclenché pour  libc-bin (2.19-0ubuntu6.4) ...
asatysco2@ordi2:~$ sudo /home/asatysco2/Bureau/fglrx-14.501.1003/amd-driver-installer-14.501.1003-x86.x86_64.run --buildandinstallpkg
Created directory fglrx-install.wc5WsH
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-14.501.1003..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
=====================================================================
 AMD Catalyst(TM) Proprietary Driver Installer/Packager 
=====================================================================
Generating and Installing package: Ubuntu/trusty
Package /home/asatysco2/fglrx-core_14.501-0ubuntu1_amd64.deb has been successfully generated
Package /home/asatysco2/fglrx_14.501-0ubuntu1_amd64.deb has been successfully generated
Package /home/asatysco2/fglrx-dev_14.501-0ubuntu1_amd64.deb has been successfully generated
Package /home/asatysco2/fglrx-amdcccle_14.501-0ubuntu1_amd64.deb has been successfully generated
(Reading database ... 231139 files and directories currently installed.)
Preparing to unpack fglrx-core_14.501-0ubuntu1_amd64.deb ...
Unpacking fglrx-core (2:14.501-0ubuntu1) ...
Selecting previously unselected package fglrx.
Preparing to unpack fglrx_14.501-0ubuntu1_amd64.deb ...
Unpacking fglrx (2:14.501-0ubuntu1) ...
Selecting previously unselected package fglrx-amdcccle.
Preparing to unpack fglrx-amdcccle_14.501-0ubuntu1_amd64.deb ...
Unpacking fglrx-amdcccle (2:14.501-0ubuntu1) ...
Setting up fglrx-core (2:14.501-0ubuntu1) ...
update-alternatives: using /usr/lib/fglrx-core/ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GFXCORE.conf (x86_64-linux-gnu_gfxcore_conf) in auto mode
Loading new fglrx-core-14.501 DKMS files...
First Installation: checking all kernels...
Building only for 3.13.0-43-generic
Building for architecture x86_64
Building initial module for 3.13.0-43-generic
Done.

fglrx:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.13.0-43-generic/updates/dkms/

depmod.......

DKMS: install completed.
update-initramfs: deferring update (trigger activated)
Setting up fglrx (2:14.501-0ubuntu1) ...
update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode
update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken
update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode
Processing triggers for desktop-file-utils (0.22-1ubuntu1) ...
Processing triggers for ureadahead (0.100.0-16) ...
Setting up fglrx-amdcccle (2:14.501-0ubuntu1) ...
Processing triggers for gnome-menus (3.10.1-0ubuntu2) ...
Processing triggers for mime-support (3.54ubuntu1) ...
Processing triggers for initramfs-tools (0.103ubuntu4.2) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-43-generic
Processing triggers for libc-bin (2.19-0ubuntu6.4) ...
fglrx-core_14.501-0ubuntu1_amd64.deb fglrx_14.501-0ubuntu1_amd64.deb fglrx-amdcccle_14.501-0ubuntu1_amd64.deb
Cleaning up removed packages
Uninitialised file found, configuring.
PowerXpress info: Diagnostic output from /usr/lib64/fglrx/switchlibglx:
update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken
update-alternatives: warning: not replacing /usr/lib/x86_64-linux-gnu/xorg/extra-modules with a link

Using /etc/X11/xorg.conf
Saving back-up to /etc/X11/xorg.conf.original-2
Removing temporary directory: fglrx-install.wc5WsH

Ca sent meilleur, je reboote !

[edit 2] Ah, ban nan ! Plantage.
Du coup je remets en ordre

:~$ sudo apt-get remove --purge fglrx fglrx-amdcccle fglrx-updates fglrx-amdcccle-updates
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Package 'fglrx-amdcccle' is not installed, so not removed
Package 'fglrx-amdcccle-updates' is not installed, so not removed
Package 'fglrx-updates' is not installed, so not removed
Les paquets suivants seront ENLEVÉS :
  fglrx*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] 
(Lecture de la base de données... 231160 fichiers et répertoires déjà installés.)
Suppression de fglrx (2:14.501-0ubuntu1) ...
Purging configuration files for fglrx (2:14.501-0ubuntu1) ...
dpkg : avertissement : lors de la suppression de fglrx, le répertoire « /etc/ati » n'était pas vide, donc il n'a pas été supprimé
dpkg : avertissement : lors de la suppression de fglrx, le répertoire « /usr/lib/x86_64-linux-gnu/xorg/extra-modules » n'était pas vide, donc il n'a pas été supprimé
dpkg : avertissement : lors de la suppression de fglrx, le répertoire « /usr/lib32/fglrx » n'était pas vide, donc il n'a pas été supprimé

Et comme je suis poète, je vire les trois répertoires qui résistent à grand coup de gksudo thunar tongue

Toutes ces aventures te donnent des idées ?

Dernière modification par nam1962 (Le 13/12/2014, à 11:56)


[ Modéré ]

Hors ligne

#84 Le 14/12/2014, à 22:26

F50

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Là, je suis sur le point de prendre l'avion et à la bourre à donf, dès que j'atterri et me stabilise quelque peu, je regarde ça de près et te dis, désolé...

#85 Le 14/12/2014, à 22:35

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

wink pas de souci, je survis avec la intel (mais je râle quand je vois les écrans de mes installés avec des définitions à mourir !)
Bon vol à toi !


[ Modéré ]

Hors ligne

#86 Le 15/12/2014, à 07:02

F50

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Merci, à bientôt. smile

#87 Le 16/01/2015, à 11:08

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Bon, j'ai encore retenté... me demande si je je dois pas passer cette bécane en 14.10...


[ Modéré ]

Hors ligne

#88 Le 08/02/2015, à 14:10

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Bon en 14.10 il y a du progrès : plus d'écran noir.
J'ai un peu ramé because bien sûr il y a le bug wine (fglrx & wine sont incompatibles en utopic : https://bugs.launchpad.net/ubuntu/+sour … ug/1376587 )
J'ai donc viré wine, puis les lib coupables.

sudo apt-get remove --auto-remove ocl-icd-libopencl1

J'ai désormais Catalyst dans le menu Paramètres, mais... ça ne fonctionne toujours pas !! hmm

1423400795.png

et mon dmesg est bien secoué..

[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f7000-0x23f5fbfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880238c00000-ffff88023ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3a4befff]
[    0.000000]   node   0: [mem 0x3afff000-0x3affffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 1546311
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 135 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3659 pages used for memmap
[    0.000000]   DMA32 zone: 234176 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x3ba00000-0x3f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a4bf000-0x3a8befff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a8bf000-0x3aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3aebf000-0x3afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3afbf000-0x3affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3b000000-0x3f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023f200000 s83328 r8192 d23168 u262144
[    0.000000] pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1522013
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic.efi.signed root=UUID=47b4d941-714b-47da-9263-2dabf81f117a ro recovery nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5918040K/6185244K available (7741K kernel code, 1201K rwdata, 3608K rodata, 1360K init, 1308K bss, 267204K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.501 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.00 BogoMIPS (lpj=9578004)
[    0.000041] pid_max: default: 32768 minimum: 301
[    0.000048] ACPI: Core revision 20140424
[    0.011592] ACPI: All ACPI Tables successfully acquired
[    0.067559] Security Framework initialized
[    0.067580] AppArmor: AppArmor initialized
[    0.067583] Yama: becoming mindful.
[    0.068121] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.069774] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.070493] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.070507] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.070725] Initializing cgroup subsys memory
[    0.070750] Initializing cgroup subsys devices
[    0.070757] Initializing cgroup subsys freezer
[    0.070761] Initializing cgroup subsys net_cls
[    0.070765] Initializing cgroup subsys blkio
[    0.070770] Initializing cgroup subsys perf_event
[    0.070773] Initializing cgroup subsys net_prio
[    0.070780] Initializing cgroup subsys hugetlb
[    0.070802] CPU: Physical Processor ID: 0
[    0.070804] CPU: Processor Core ID: 0
[    0.070809] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.070815] mce: CPU supports 7 MCE banks
[    0.070826] CPU0: Thermal monitoring enabled (TM1)
[    0.070837] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.070950] Freeing SMP alternatives memory: 32K (ffffffff82e82000 - ffffffff82e8a000)
[    0.074221] ftrace: allocating 29303 entries in 115 pages
[    0.089045] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.128766] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.128776] TSC deadline timer enabled
[    0.128801] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.128824] ... version:                3
[    0.128826] ... bit width:              48
[    0.128828] ... generic registers:      4
[    0.128830] ... value mask:             0000ffffffffffff
[    0.128831] ... max period:             0000ffffffffffff
[    0.128833] ... fixed-purpose events:   3
[    0.128835] ... event mask:             000000070000000f
[    0.130636] x86: Booting SMP configuration:
[    0.130640] .... node  #0, CPUs:      #1
[    0.143770] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.143865]  #2
[    0.154463] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.157103]  #3
[    0.170270] x86: Booted up 1 node, 4 CPUs
[    0.170276] smpboot: Total of 4 processors activated (19156.00 BogoMIPS)
[    0.173553] devtmpfs: initialized
[    0.176033] evm: security.selinux
[    0.176036] evm: security.SMACK64
[    0.176038] evm: security.SMACK64EXEC
[    0.176039] evm: security.SMACK64TRANSMUTE
[    0.176041] evm: security.SMACK64MMAP
[    0.176042] evm: security.ima
[    0.176044] evm: security.capability
[    0.176099] PM: Registering ACPI NVS region [mem 0x3aebf000-0x3afbefff] (1048576 bytes)
[    0.176986] pinctrl core: initialized pinctrl subsystem
[    0.177059] regulator-dummy: no parameters
[    0.177096] RTC time: 13:00:52, date: 02/08/15
[    0.177146] NET: Registered protocol family 16
[    0.177293] cpuidle: using governor ladder
[    0.177297] cpuidle: using governor menu
[    0.177349] ACPI: bus type PCI registered
[    0.177352] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.177431] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.177435] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.177766] PCI: Using configuration type 1 for base access
[    0.182775] ACPI: Added _OSI(Module Device)
[    0.182780] ACPI: Added _OSI(Processor Device)
[    0.182782] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.182784] ACPI: Added _OSI(Processor Aggregator Device)
[    0.186591] ACPI: Executed 1 blocks of module-level executable AML code
[    0.191754] ACPI: Dynamic OEM Table Load:
[    0.191767] ACPI: SSDT 0xFFFF880235E22000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.194605] ACPI: Dynamic OEM Table Load:
[    0.194615] ACPI: SSDT 0xFFFF880236329000 000303 (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.198477] ACPI: Dynamic OEM Table Load:
[    0.198486] ACPI: SSDT 0xFFFF880235E78000 000119 (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.203290] ACPI: Interpreter enabled
[    0.203299] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.203306] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.203322] ACPI: (supports S0 S3 S4 S5)
[    0.203324] ACPI: Using IOAPIC for interrupt routing
[    0.203350] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.354758] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.357564] ACPI: Power Resource [FN00] (off)
[    0.357676] ACPI: Power Resource [FN01] (off)
[    0.357776] ACPI: Power Resource [FN02] (off)
[    0.357876] ACPI: Power Resource [FN03] (off)
[    0.357976] ACPI: Power Resource [FN04] (off)
[    0.358531] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.358538] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.358656] \_SB_.PCI0:_OSC invalid UUID
[    0.358658] _OSC request data:1 1f 0 
[    0.358662] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.359098] PCI host bridge to bus 0000:00
[    0.359102] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.359105] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.359108] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.359111] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.359113] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.359116] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.359119] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.359121] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.359124] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.359127] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.359129] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.359132] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.359135] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.359137] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.359140] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.359142] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.359145] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.359148] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[    0.359157] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.359243] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.359276] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.359311] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.359356] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.359366] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.359373] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.359377] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.359476] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.359500] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.359573] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.359633] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.359678] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.359703] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.359782] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.359868] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.359891] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.359983] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.360034] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.360080] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.360098] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.360173] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.360213] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.360254] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.360337] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.360380] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.360421] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.360504] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.360546] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.360596] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.360618] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.360710] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.360774] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.360817] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.360989] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.361010] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.361019] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.361027] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.361036] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.361044] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.361053] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.361099] pci 0000:00:1f.2: PME# supported from D3hot
[    0.361170] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.361188] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.361209] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.361349] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.361361] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.361370] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.361375] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.361385] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.361418] pci 0000:01:00.0: supports D1 D2
[    0.361482] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.369680] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.369692] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.369700] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.369710] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.369848] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.369872] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.370048] pci 0000:07:00.0: supports D1 D2
[    0.370050] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.370138] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.370162] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.370197] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.370219] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.370322] pci 0000:07:00.2: supports D1 D2
[    0.370323] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.370373] pci 0000:07:00.2: System wakeup disabled by ACPI
[    0.377711] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.377725] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.377735] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.377748] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.379506] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[    0.379530] pci 0000:08:00.0: reg 0x10: [mem 0x61510000-0x6151ffff]
[    0.379681] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.379712] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.381402] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[    0.381426] pci 0000:08:00.1: reg 0x10: [mem 0x61500000-0x6150ffff]
[    0.381576] pci 0000:08:00.1: supports D1
[    0.381578] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[    0.398632] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.398640] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.471899] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.471950] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.471999] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472047] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472096] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472148] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472196] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472245] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.472591] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.472629] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.472733] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.472736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.472742] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.472745] vgaarb: loaded
[    0.472746] vgaarb: bridge control possible 0000:01:00.0
[    0.472748] vgaarb: no bridge control possible 0000:00:02.0
[    0.472981] SCSI subsystem initialized
[    0.473035] libata version 3.00 loaded.
[    0.473059] ACPI: bus type USB registered
[    0.473079] usbcore: registered new interface driver usbfs
[    0.473089] usbcore: registered new interface driver hub
[    0.473110] usbcore: registered new device driver usb
[    0.473282] PCI: Using ACPI for IRQ routing
[    0.479763] PCI: pci_cache_line_size set to 64 bytes
[    0.479820] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.479822] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.479823] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.479825] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.479937] NetLabel: Initializing
[    0.479939] NetLabel:  domain hash size = 128
[    0.479941] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.479954] NetLabel:  unlabeled traffic allowed by default
[    0.480018] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.480025] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.482062] Switched to clocksource hpet
[    0.487520] AppArmor: AppArmor Filesystem Enabled
[    0.487561] pnp: PnP ACPI init
[    0.487576] ACPI: bus type PNP registered
[    0.487704] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.487708] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.487711] system 00:00: [io  0xffff] has been reserved
[    0.487714] system 00:00: [io  0xffff] has been reserved
[    0.487717] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.487720] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.487722] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.487725] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.487729] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.487762] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.487811] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.487815] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.487852] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.487884] pnp 00:04: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.558355] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.558359] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.558362] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.558364] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.558367] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.558370] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.558373] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.558376] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    0.558379] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    0.558382] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.558385] system 00:05: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.558389] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558708] pnp 00:06: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.558716] pnp 00:06: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.558744] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.558748] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.558833] pnp: PnP ACPI: found 7 devices
[    0.558835] ACPI: bus type PNP unregistered
[    0.565305] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.565335] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.565339] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.565342] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.565346] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.565350] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.565355] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.565359] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.565365] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.565371] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.565379] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.565385] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.565396] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.565398] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.565399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.565401] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.565403] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.565405] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.565406] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.565408] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.565410] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.565412] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.565413] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.565415] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.565417] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.565419] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.565420] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.565422] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.565424] pci_bus 0000:00: resource 20 [mem 0x3fa00000-0xfeafffff]
[    0.565426] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.565427] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.565429] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.565431] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.565433] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.565435] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.565437] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.565468] NET: Registered protocol family 2
[    0.565663] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.565820] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.565951] TCP: Hash tables configured (established 65536 bind 65536)
[    0.565974] TCP: reno registered
[    0.565986] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.566018] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.566092] NET: Registered protocol family 1
[    0.566109] pci 0000:00:02.0: Video device with shadowed ROM
[    0.950644] PCI: CLS 64 bytes, default 64
[    0.950707] Trying to unpack rootfs image as initramfs...
[    1.267678] Freeing initrd memory: 19956K (ffff8800358f6000 - ffff880036c73000)
[    1.267721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.267724] software IO TLB [mem 0x2cb7f000-0x30b7f000] (64MB) mapped at [ffff88002cb7f000-ffff880030b7efff]
[    1.267776] Simple Boot Flag at 0x44 set to 0x1
[    1.267941] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.267991] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.267999] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.268007] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.268016] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.268072] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.268098] Scanning for low memory corruption every 60 seconds
[    1.268450] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.268476] Initialise system trusted keyring
[    1.268501] audit: initializing netlink subsys (disabled)
[    1.268516] audit: type=2000 audit(1423400453.248:1): initialized
[    1.268865] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.270327] zpool: loaded
[    1.270332] zbud: loaded
[    1.270498] VFS: Disk quotas dquot_6.5.2
[    1.270535] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.271002] fuse init (API version 7.23)
[    1.271088] msgmni has been set to 11724
[    1.271148] Key type big_key registered
[    1.271559] Key type asymmetric registered
[    1.271564] Asymmetric key parser 'x509' registered
[    1.271599] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.271649] io scheduler noop registered
[    1.271652] io scheduler deadline registered (default)
[    1.271699] io scheduler cfq registered
[    1.271778] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[    1.271890] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.271930] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    1.272042] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    1.272176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.272193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.272245] efifb: probing for efifb
[    1.272263] efifb: framebuffer at 0x50000000, mapped to 0xffffc90010f00000, using 4160k, total 4160k
[    1.272266] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.272267] efifb: scrolling: redraw
[    1.272270] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.274771] Console: switching to colour frame buffer device 170x48
[    1.277108] fb0: EFI VGA frame buffer device
[    1.277155] intel_idle: MWAIT substates: 0x21120
[    1.277157] intel_idle: v0.4 model 0x2A
[    1.277158] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.277396] ACPI: AC Adapter [ACAD] (on-line)
[    1.277511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    1.277551] ACPI: Power Button [PWRB]
[    1.277608] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.277737] ACPI: Lid Switch [LID0]
[    1.277804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.277833] ACPI: Power Button [PWRF]
[    1.277877] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    1.277905] ACPI: Fan [FAN0] (off)
[    1.277930] ACPI: Fan [FAN1] (off)
[    1.277975] ACPI: Fan [FAN2] (off)
[    1.278015] ACPI: Fan [FAN3] (off)
[    1.278057] ACPI: Fan [FAN4] (off)
[    1.278647] thermal LNXTHERM:00: registered as thermal_zone0
[    1.278672] ACPI: Thermal Zone [TZ00] (73 C)
[    1.278940] thermal LNXTHERM:01: registered as thermal_zone1
[    1.278963] ACPI: Thermal Zone [TZ01] (73 C)
[    1.279038] thermal LNXTHERM:02: registered as thermal_zone2
[    1.279061] ACPI: Thermal Zone [TZ02] (28 C)
[    1.279117] GHES: HEST is not enabled!
[    1.279232] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.522994] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.523892] ACPI: Battery Slot [BAT1] (battery present)
[    1.524872] Linux agpgart interface v0.103
[    1.527247] brd: module loaded
[    1.528720] loop: module loaded
[    1.529799] libphy: Fixed MDIO Bus: probed
[    1.530671] tun: Universal TUN/TAP device driver, 1.6
[    1.531542] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.532461] PPP generic driver version 2.4.2
[    1.533376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.534265] ehci-pci: EHCI PCI platform driver
[    1.535253] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.536132] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.537015] ehci-pci 0000:00:1a.0: debug port 2
[    1.541785] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.541802] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.550987] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.551859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.552700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.553538] usb usb1: Product: EHCI Host Controller
[    1.554367] usb usb1: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
[    1.555201] usb usb1: SerialNumber: 0000:00:1a.0
[    1.556165] hub 1-0:1.0: USB hub found
[    1.556979] hub 1-0:1.0: 2 ports detected
[    1.557963] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.558775] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.559604] ehci-pci 0000:00:1d.0: debug port 2
[    1.564297] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.564312] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.575006] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.575826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.576604] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.577375] usb usb2: Product: EHCI Host Controller
[    1.578133] usb usb2: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
[    1.578894] usb usb2: SerialNumber: 0000:00:1d.0
[    1.579783] hub 2-0:1.0: USB hub found
[    1.580520] hub 2-0:1.0: 2 ports detected
[    1.581336] ehci-platform: EHCI generic platform driver
[    1.582083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.582840] ohci-pci: OHCI PCI platform driver
[    1.583621] ohci-platform: OHCI generic platform driver
[    1.584404] uhci_hcd: USB Universal Host Controller Interface driver
[    1.585290] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.586072] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.586954] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.586975] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.587040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.587833] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588623] usb usb3: Product: xHCI Host Controller
[    1.589409] usb usb3: Manufacturer: Linux 3.16.0-30-generic xhci_hcd
[    1.590204] usb usb3: SerialNumber: 0000:00:14.0
[    1.591110] hub 3-0:1.0: USB hub found
[    1.591893] hub 3-0:1.0: 4 ports detected
[    1.592960] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.593735] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.594547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.595344] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.596139] usb usb4: Product: xHCI Host Controller
[    1.596932] usb usb4: Manufacturer: Linux 3.16.0-30-generic xhci_hcd
[    1.597729] usb usb4: SerialNumber: 0000:00:14.0
[    1.598653] hub 4-0:1.0: USB hub found
[    1.599460] hub 4-0:1.0: 4 ports detected
[    1.600587] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.642342] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.643144] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.644118] mousedev: PS/2 mouse device common for all mice
[    1.645211] rtc_cmos 00:01: RTC can wake from S4
[    1.646169] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.646988] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.647863] device-mapper: uevent: version 1.0.3
[    1.648744] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.649572] Intel P-state driver initializing.
[    1.650421] Intel pstate controlling: cpu 0
[    1.651286] Intel pstate controlling: cpu 1
[    1.652110] Intel pstate controlling: cpu 2
[    1.652920] Intel pstate controlling: cpu 3
[    1.653719] Consider also installing thermald for improved thermal control.
[    1.654515] ledtrig-cpu: registered to indicate activity on CPUs
[    1.655333] EFI Variables Facility v0.08 2004-May-17
[    1.686974] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.871347] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.023763] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.024595] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.025673] hub 1-1:1.0: USB hub found
[    2.026640] hub 1-1:1.0: 6 ports detected
[    2.139509] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.271607] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    2.279982] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.280838] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.281858] hub 2-1:1.0: USB hub found
[    2.282857] hub 2-1:1.0: 8 ports detected
[    2.379084] TCP: cubic registered
[    2.380029] NET: Registered protocol family 10
[    2.381070] NET: Registered protocol family 17
[    2.381889] Key type dns_resolver registered
[    2.383116] Loading compiled-in X.509 certificates
[    2.384901] Loaded X.509 cert 'Magrathea: Glacier signing key: fd44851cc6750f85e8f0c2c69b128263f404d5e3'
[    2.385749] registered taskstats version 1
[    2.388471] Key type trusted registered
[    2.390906] Key type encrypted registered
[    2.393370] AppArmor: AppArmor sha1 policy hashing enabled
[    2.394207] ima: No TPM chip found, activating TPM-bypass!
[    2.395056] evm: HMAC attrs: 0x1
[    2.396268]   Magic number: 3:913:27
[    2.397138] memory memory67: hash matches
[    2.398008] rtc_cmos 00:01: setting system clock to 2015-02-08 13:00:54 UTC (1423400454)
[    2.398905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.399752] EDD information not available.
[    2.400666] PM: Hibernation image not present or could not be loaded.
[    2.401511] Freeing unused kernel memory: 1360K (ffffffff82d2e000 - ffffffff82e82000)
[    2.402371] Write protecting the kernel read-only data: 12288k
[    2.404462] Freeing unused kernel memory: 440K (ffff880002792000 - ffff880002800000)
[    2.406448] Freeing unused kernel memory: 488K (ffff880002b86000 - ffff880002c00000)
[    2.418215] systemd-udevd[123]: starting version 208
[    2.419509] random: systemd-udevd urandom read with 6 bits of entropy available
[    2.443836] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.443851] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    2.446168] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.447052] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[    2.448217] r8169 0000:07:00.2: irq 43 for MSI/MSI-X
[    2.448398] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc90000c78000, 84:34:97:14:24:7b, XID 08800800 IRQ 43
[    2.449325] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.451783] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.453366] ahci 0000:00:1f.2: version 3.0
[    2.453530] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.467805] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    2.469079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.484348] scsi0 : ahci
[    2.488257] scsi1 : ahci
[    2.489283] scsi2 : ahci
[    2.490293] scsi3 : ahci
[    2.491296] scsi4 : ahci
[    2.492293] scsi5 : ahci
[    2.493207] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 44
[    2.494091] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 44
[    2.494960] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 44
[    2.495832] ata4: DUMMY
[    2.496697] ata5: DUMMY
[    2.497521] ata6: DUMMY
[    2.639833] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.640733] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.641593] usb 3-2: Product: USB Optical Mouse
[    2.642448] usb 3-2: Manufacturer: PixArt
[    2.643465] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.812209] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.816153] ata2: SATA link down (SStatus 0 SControl 300)
[    2.817160] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.820201] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    2.823196] ata3.00: configured for UDMA/133
[    2.824148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.828908] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    2.829847] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.832485] ata1.00: configured for UDMA/100
[    2.833640] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 A50A PQ: 0 ANSI: 5
[    2.834947] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.834954] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.836799] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.837792] sd 0:0:0:0: [sda] Write Protect is off
[    2.838668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.838686] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.839712] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    2.859776] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.860708] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.861778] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.861969] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.902740]  sda: sda1 sda2 sda3 sda4
[    2.904337] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.000279] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[    3.001188] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.002074] usb 3-4: SerialNumber: 47163a54f0d0
[    3.007104] hidraw: raw HID events driver (C) Jiri Kosina
[    3.011282] usbcore: registered new interface driver usbhid
[    3.012194] usbhid: USB HID core driver
[    3.014544] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0001/input/input6
[    3.015559] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    3.074514] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    3.229293] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[    3.230241] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.231137] usb 1-1.1: Product: HP Truevision HD
[    3.232038] usb 1-1.1: Manufacturer: SuYin
[    3.232963] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    3.268739] Switched to clocksource tsc
[    3.482158] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.970655] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[    4.103907] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    4.436117] random: nonblocking pool is initialized
[    5.377120] systemd-udevd[255]: starting version 208
[    6.254012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.260378] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[    6.263009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.264716] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIX) (20140424/utaddress-258)
[    6.267951] Initializing HPQ6001 module
[    6.267975] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    6.267979] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    6.267980] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.267984] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIX) (20140424/utaddress-258)
[    6.267988] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    6.267991] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    6.267992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.267996] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIX) (20140424/utaddress-258)
[    6.267999] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    6.268003] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    6.268004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.268004] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.303932] input: HP Wireless hotkeys as /devices/virtual/input/input7
[    6.314669] wmi: Mapper loaded
[    6.425091] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[    6.493620] hp_accel: laptop model unknown, using default axes configuration
[    6.495483] lis3lv02d: unknown sensor type 0x0
[    6.497063] hp_accel: probe of HPQ0004:00 failed with error -22
[    6.608981] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    6.611464] AMD IOMMUv2 functionality not available on this system
[    6.771221] [drm] Initialized drm 1.1.0 20060810
[    7.116410] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    7.118037] Disabling lock debugging due to kernel taint
[    7.123206] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[    7.139754] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5668 MBytes.
[    7.141632] <6>[fglrx]   vendor: 1002 device: 6840 revision: 0 count: 1
[    7.143486] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[    7.145102] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    7.146821] <6>[fglrx] Kernel PAT support is enabled
[    7.148435] <6>[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
[    7.295907] cfg80211: Calling CRDA to update world regulatory domain
[    7.345749] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.462652] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.577947] intel_rapl: Found RAPL domain package
[    7.579635] intel_rapl: Found RAPL domain core
[    7.581218] intel_rapl: Found RAPL domain uncore
[    7.611331] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[    7.621172] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[    7.644031] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.770766] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.816816] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    7.818306] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.819817] sound hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    7.822412] sound hdaudioC0D0:    mono: mono_out=0x0
[    7.824447] sound hdaudioC0D0:    inputs:
[    7.824536] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.828357] sound hdaudioC0D0:      Internal Mic=0x11
[    7.829759] sound hdaudioC0D0:      Mic=0xa
[    7.901825] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.903840] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.905372] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.090111] cfg80211: World regulatory domain updated:
[    8.091325] cfg80211:  DFS Master region: unset
[    8.091342] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.093675] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    8.094816] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    8.095916] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[    8.096986] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    8.098019] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    8.165336] media: Linux media interface: v0.10
[    8.224955] Linux video capture interface: v2.00
[    8.259378] input: HP WMI hotkeys as /devices/virtual/input/input8
[    8.362974] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[    8.373039] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
[    8.374074] usbcore: registered new interface driver uvcvideo
[    8.375132] USB Video Class driver (1.1.1)
[   16.106011] Adding 6347772k swap on /dev/sda2.  Priority:-1 extents:1 across:6347772k FS
[   16.497384] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   17.486873] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   41.519365] init: plymouth-upstart-bridge main process (1027) terminated with status 1
[   41.519377] init: plymouth-upstart-bridge main process ended, respawning
[   41.535532] init: plymouth-upstart-bridge main process (1047) terminated with status 1
[   41.535548] init: plymouth-upstart-bridge main process ended, respawning
[   41.544957] init: plymouth-upstart-bridge main process (1066) terminated with status 1
[   41.544969] init: plymouth-upstart-bridge main process ended, respawning
[   41.549724] init: plymouth-upstart-bridge main process (1068) terminated with status 1
[   41.549735] init: plymouth-upstart-bridge main process ended, respawning
[   41.555204] init: plymouth-upstart-bridge main process (1070) terminated with status 1
[   41.555220] init: plymouth-upstart-bridge main process ended, respawning
[   41.560082] init: plymouth-upstart-bridge main process (1073) terminated with status 1
[   41.560099] init: plymouth-upstart-bridge main process ended, respawning
[   41.562959] init: plymouth-upstart-bridge main process (1076) terminated with status 1
[   41.562971] init: plymouth-upstart-bridge main process ended, respawning
[   41.565701] init: plymouth-upstart-bridge main process (1078) terminated with status 1
[   41.565716] init: plymouth-upstart-bridge main process ended, respawning
[   41.568316] init: plymouth-upstart-bridge main process (1079) terminated with status 1
[   41.568327] init: plymouth-upstart-bridge main process ended, respawning
[   41.570979] init: plymouth-upstart-bridge main process (1081) terminated with status 1
[   41.570995] init: plymouth-upstart-bridge main process ended, respawning
[   41.573578] init: plymouth-upstart-bridge main process (1083) terminated with status 1
[   41.573589] init: plymouth-upstart-bridge respawning too fast, stopped
[   41.764810] lp: driver loaded but no devices found
[   41.773801] ppdev: user-space parallel port driver
[   53.211473] init: Error while reading from descriptor: Broken pipe
[   53.214058] init: failsafe main process (1391) killed by TERM signal
[   53.494965] audit: type=1400 audit(1423400505.546:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1581 comm="apparmor_parser"
[   53.494972] audit: type=1400 audit(1423400505.546:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1581 comm="apparmor_parser"
[   53.496613] audit: type=1400 audit(1423400505.550:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1581 comm="apparmor_parser"
[   53.496619] audit: type=1400 audit(1423400505.550:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1581 comm="apparmor_parser"
[   53.496623] audit: type=1400 audit(1423400505.550:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1581 comm="apparmor_parser"
[   53.506094] audit: type=1400 audit(1423400505.558:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1581 comm="apparmor_parser"
[   53.506102] audit: type=1400 audit(1423400505.558:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1581 comm="apparmor_parser"
[   53.506107] audit: type=1400 audit(1423400505.558:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1581 comm="apparmor_parser"
[   53.506111] audit: type=1400 audit(1423400505.558:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1581 comm="apparmor_parser"
[   53.506114] audit: type=1400 audit(1423400505.558:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1581 comm="apparmor_parser"
[   53.676735] Bluetooth: Core ver 2.19
[   53.676750] NET: Registered protocol family 31
[   53.676751] Bluetooth: HCI device and connection manager initialized
[   53.676759] Bluetooth: HCI socket layer initialized
[   53.676761] Bluetooth: L2CAP socket layer initialized
[   53.676769] Bluetooth: SCO socket layer initialized
[   53.686660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   53.686663] Bluetooth: BNEP filters: protocol multicast
[   53.686670] Bluetooth: BNEP socket layer initialized
[   53.715276] init: cups main process (1597) killed by HUP signal
[   53.715293] init: cups main process ended, respawning
[   53.765121] Bluetooth: RFCOMM TTY layer initialized
[   53.765134] Bluetooth: RFCOMM socket layer initialized
[   53.765139] Bluetooth: RFCOMM ver 1.11
[   54.150533] systemd-logind[1670]: New seat seat0.
[   54.159399] systemd-logind[1670]: Watching system buttons on /dev/input/event2 (Power Button)
[   54.159500] systemd-logind[1670]: Watching system buttons on /dev/input/event0 (Power Button)
[   54.159585] systemd-logind[1670]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   54.298829] r8169 0000:07:00.2 eth0: link down
[   54.298883] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.300659] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   54.323605] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   54.456200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   55.395951] Non-volatile memory driver v1.3
[   56.283669] wlan0: authenticate with 00:24:d4:d4:78:b4
[   56.289792] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[   56.295520] wlan0: authenticated
[   56.297617] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[   56.300528] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=4)
[   56.300612] wlan0: associated
[   56.300637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.670309] systemd-logind[1670]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[   59.670317] systemd-logind[1670]: Failed to start user service: Unknown unit: user@1000.service
[   59.674054] systemd-logind[1670]: New session c1 of user asatysco2.
[   59.674074] systemd-logind[1670]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   60.842496] init: plymouth-stop pre-start process (3486) terminated with status 1

Dernière modification par nam1962 (Le 08/02/2015, à 14:12)


[ Modéré ]

Hors ligne

#89 Le 06/03/2015, à 15:15

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Bon, ça va beaucoup mieux avec le dépôt de Oibaf : http://forum.ubuntu-fr.org/viewtopic.php?id=1796371

..Mais toujours impossible d'activer ma fichue Radeon avec vgaswitcheroo : je n'arrive jamais sur la discrète !

Dernière modification par nam1962 (Le 06/03/2015, à 15:19)


[ Modéré ]

Hors ligne

#90 Le 07/03/2015, à 14:30

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Personne n'utilise vgaswitcheroo sur le forum ou quoi ?
Je vais finir par réinstaller W$ pour voir si ils savent gérer....


[ Modéré ]

Hors ligne

#91 Le 07/03/2015, à 16:04

nany

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Nope, pas de vgaswitcheroo chez moi (pas besoin de deux cartes tongue).
Es-tu allé voir la doc anglaise ? Notamment script for use during bootup.

Hors ligne

#92 Le 07/03/2015, à 17:47

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Wi, l'ai appliquée ligne à ligne.
La discrète n'est jamais activée (ou alors je ne pige pas qu'elle l'est.....)


[ Modéré ]

Hors ligne

#93 Le 07/03/2015, à 17:52

Rufus T. Firefly

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

C'est bien ce que je pensais... Il n'y a aucune différence perceptible (sauf avec un thermomètre), mais bon, il faut bien faire marcher le petit commerce... lol


La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#94 Le 07/03/2015, à 20:05

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Quand même, les bécanes d'amis sur lesquelles j'ai réussi à faire fonctionner la discrète avaient une définition et une fluidité bien meilleure.
Ça fatigue moins les yeux !!


[ Modéré ]

Hors ligne

#95 Le 16/03/2015, à 10:24

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Groumpf....

:~$ sudo ls -l /sys/kernel/debug/vgaswitcheroo/switch
-rw-r--r-- 1 root root 0 mars  16 09:50 /sys/kernel/debug/vgaswitcheroo/switch

:~$ mount | grep /sys/kernel/debug
debugfs on /sys/kernel/debug type debugfs (rw,relatime)

:~$ grep -i switcheroo /boot/config-`uname -r`
CONFIG_VGA_SWITCHEROO=y

Mais...

:~$ echo DIS > /sys/kernel/debug/vgaswitcheroo/switch
bash: /sys/kernel/debug/vgaswitcheroo/switch: Permission non accordée

:~$ sudo echo DIS > /sys/kernel/debug/vgaswitcheroo/switch
bash: /sys/kernel/debug/vgaswitcheroo/switch: Permission non accordée

[ Modéré ]

Hors ligne

#96 Le 16/03/2015, à 10:41

nany

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

sudo sh -c 'echo DIS > /sys/kernel/debug/vgaswitcheroo/switch'

capello.png

Hors ligne

#97 Le 16/03/2015, à 10:53

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Ah, bah oui, mais après :

:~$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynOff:0000:01:00.0

(J'ai regardé à chaud et après reboot et en repassant encore...)


[ Modéré ]

Hors ligne

#98 Le 16/03/2015, à 11:13

nany

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Ton pc est envoûté, faut faire appel à Mamadou. tongue

Hors ligne

#99 Le 16/03/2015, à 11:22

Rufus T. Firefly

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

Il finira par être mondialement connu ailleurs que dans son quartier, ce bon M. Mamadou... lol


La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#100 Le 16/03/2015, à 11:36

nam1962

Re : [Abandon] HP Envy M6 1164sf impossible d'installer Radeon HD 7600M

-rw-r--r-- 1 root root 0 mars  16 09:50 /sys/kernel/debug/vgaswitcheroo/switch

ai-je les bons droits ?

[edit] je suis passé en root avec sudo su, la commande est passée.... mais :

:~$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynOff:0000:01:00.0

Je laisse tomber et fais un post récapitulatif.

Dernière modification par nam1962 (Le 17/03/2015, à 11:37)


[ Modéré ]

Hors ligne