#1 Le 07/07/2008, à 08:40
- pingourd
Téléphonie IP via Keyyo en panne.
Bonjour à tous,
Qui peut m'aider à dépanner la programmation logiciel du Voip 2T Linksys, voir du modem Speedtouch 510?
L'ensemble de cette chaine: modem (SpeedTouch 510), switch (D-Link DES-1008D), Voip (Linksys PAP2T) et un ensemble de 3 téléphones sans fil (Motorola ME4052 num 1.8 Ghz) avait été programmée par un informaticien de talent. Depuis trois jours, ce téléphone ne fonctionne plus.
J'ai changé les accus des téléphones
Merci d'avoir consacré de votre temps pour me dépanner. Le pingoin Gourdonnais.
Hors ligne
#2 Le 12/07/2008, à 23:13
- pingourd
Re : Téléphonie IP via Keyyo en panne.
Keyyo consulté, me demande si j'ai ouvert les ports UDP 5060 et 5061 sur le pare-feu du routeur. Comment faire pour le configurer sur le SpeedTouch 510?
Je sais accéder à basic System Log, ce qui donne:
ogged Messages
System Up Time
15:24:52 (since power on)
View Mode
All logged messages
Stop AutoRefresh Help
System Up Time
Message Contents
15:21:56
LOGIN User michel logged in on HTTP (from 10.0.0.2)
15:21:42
LOGIN User michel tried to login on HTTP (from 10.0.0.2)
02:56:35
LOGIN User michel logged in on HTTP (from 169.254.10.233)
02:56:33
DHCP server up
02:56:33
DHCP Auto DHCP: no server detected on LAN, SpeedTouch server started
02:56:26
PPP link up (PPPoA_1) [81.250.126.35]
02:56:26
PPP CHAP Chap receive success : authentication ok
02:56:26
PPP CHAP Receive challenge (rhost = BSTOU252)
02:56:23
CONFIGURATION saved after running Embedded Setup Wizard (user.tpl deduced from pppoa.tpl)
02:56:22
DHCP server went down
02:56:22
PPP link down (PPPoA_1) [86.201.193.196]
02:56:21
LOGIN User logged in on HTTP (from 169.254.10.233)
00:06:34
CONFIGURATION saved by user (/dl/user.ini)
00:05:02
LOGIN User michel logged in on HTTP (from 169.254.10.233)
00:00:32
PPP link up (PPPoA_1) [86.201.193.196]
00:00:32
PPP CHAP Chap receive success : authentication ok
00:00:32
PPP CHAP Receive challenge (rhost = BSTOU252)
00:00:13
xDSL linestate up (downstream: 7616 kbit/s, upstream: 640 kbit/s)
00:00:10
DHCP server up
00:00:10
DHCP Auto DHCP: no server detected on LAN, SpeedTouch server started
00:00:00
KERNEL Cold restart
puis en passant Advanced puis
IP Address Table
IP address table
Intf
Address/Netmask
Type
Translation
eth0
169.254.141.11/16
Auto
none
PPPoA_1
81.250.126.35/32
Auto
napt
eth0
10.0.0.138/24
User
none
loop
127.0.0.1/8
Auto
none
Click 'New' to create a new entry.
New Help
© THOMSON 2003. All rights reserved.
IP Routing Table
IP route table
Destination
Label
Gateway
Intf
Metric
169.254.141.11/32
-
169.254.141.11
eth0
0
193.253.160.3/32
-
81.250.126.35
PPPoA_1
0
81.250.126.35/32
-
81.250.126.35
PPPoA_1
0
255.255.255.255/32
-
10.0.0.138
eth0
0
10.0.0.138/32
-
10.0.0.138
eth0
0
127.0.0.1/32
-
127.0.0.1
loop
0
10.0.0.0/24
-
10.0.0.138
eth0
0
169.254.0.0/16
-
169.254.141.11
eth0
0
224.0.0.0/4
-
10.0.0.138*
eth0
0
default
-
81.250.126.35
PPPoA_1
1
Click 'New' to create a new entry.
New Help
© THOMSON 2003. All rights reserved.
DHCP
DHCP Server DHCP Relay DHCP Client
Server Config Server Leases Address Pools
Lease
Client ID
Address
Pool
TTL
State
1
01:00:1c:10:c9:b0:6f
10.0.0.1
LAN_private
01:31:33
used
2
01:00:13:d3:a4:d3:cb
10.0.0.2
LAN_private
01:35:21
used
Domain Name System (DNS)
DNS Hostname Table DNS Server Configuration
Nr
Hostname
Address
1
SpeedTouch
2
michel-desktop
10.0.0.2
3
LinksysPAP
10.0.0.1
Click 'New' to create a new entry.
New Help
© THOMSON 2003. All rights reserved.
Setup
Configuration
Item
Description
Region
World
Provider
Basic
Service Name
Routed PPPoA - DHCP - NAPT
Service Description
Routed PPPoA Packet Service configuration using always-on session connectivity.
Last Configured
Configuration set by Embedded Wizard
Specify a configuration file to upload:
Upload Backup Restore default Help
Note: 'Upload' or 'Restore Default' will erase the stored configuration, saved settings will be lost.
System Software
Item
Description
Version
4.2.10.0.0
File
LLT6AA4.2A0
Board type
ADNT-Q
Click here to get the latest software for your SpeedTouch.
All rights reserved © Copyright 2003, THOMSON
Configuration Templates
Template Overview
Filename
Service
user.tpl
Routed PPPoA - DHCP - NAPT
pppoe.tpl
Routed PPPoE - DHCP - NAPT
br.tpl
Bridged Ethernet
Select a template to view details
Help
Template Upload
Specify a template file to upload:
Upload
All rights reserved © Copyright 2003, THOMSON
avec tous ces rensignemnts, est-ce que quelq'un peuut m'indiquer la marche à suivre pour ouvrir mes ports UDP 5060 et 5061 sur pare-feu du routeur?
Merci d'avoir consacré de votre temps pour me dépanner. Le pingoin Gourdonnais.
Hors ligne