#1 Le 18/02/2015, à 14:00
- Premiumtime
[Résolu] Erreur d'installation ubuntu avec usb
Bonjour,
Désolé si ce sujet à déjà était traité, mais je n'ai pas trouvé de solution à mon problème.
Je me suis lancé dans l'aventure Ubuntu, en créant un boot sur une clé usb(8Go, FAT32) à l'aide de de UNetbootin.
Mon fichier iso étant "ubuntu-14.04.1-desktop-amd64.iso".
Après avoir cliquer sur "Install ubuntu" j'arrive sur l'interface graphique permettant l'installation. J'effectue les étapes demandé jusqu'à la localisation des fuseaux horaires. Puis en appuyant sur continuer, l'écran deviens noir et le message suiviant s'affiche en boucle:
[ 295.157817] ata5: exeption Emaks 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 296.621696] ata5: irq_stat 0x00000040, connection status changed
[ 296.625814] ata5: SError: { CommWake DevExch }
...
...
... à l'infini
Et en essayant de faire l'instalation depuis la page d'essaie ubuntu deux choses arrives soit écran noir et rien d'autre, soit le message :
Starting restore sound card [FAIL]
Puis écran noir.
Donc je n'arrive pas à installer, si vous avez la solution je vous remercie par avance. Je n'ai même plus de windows car lorsque j'ai tenté l'installation pour la première fois mon SSD à était formater.
cordialement.
Dernière modification par Premiumtime (Le 19/02/2015, à 13:20)
Hors ligne
#2 Le 18/02/2015, à 17:35
- malbo
Re : [Résolu] Erreur d'installation ubuntu avec usb
C'est quoi l'ordi (modèle, fabricant) ?
Peux-tu faire un Boot-Info et poster l'URL de ce Boot-Info ?
Hors ligne
#3 Le 18/02/2015, à 18:17
- Premiumtime
Re : [Résolu] Erreur d'installation ubuntu avec usb
J'ai fait mon ordinateur moi même il y a déjà quelques temps.
processeur : intel core i5-2500K
carte mère: acer P8Z68-V PRO
ram: gskill 8Go
carte graphique: MSI GTX 660 (il me semble)
Mais dans les détailes système via ubuntu c'est noté "Graphics Gallium 0.4 on AMD CAPE VERDE"
URL du boot-info.
http://paste.ubuntu.com/10292426/
Hors ligne
#4 Le 18/02/2015, à 19:06
- malbo
Re : [Résolu] Erreur d'installation ubuntu avec usb
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>........._7...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 15252864 of /dev/sdb1 for
its second stage. SYSLINUX is installed in the
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 100,501,503 100,499,456 83 Linux
/dev/sda2 100,503,550 117,229,567 16,726,018 5 Extended
/dev/sda5 100,503,552 117,229,567 16,726,016 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8032 MB, 8032092160 bytes
255 heads, 63 sectors/track, 976 cylinders, total 15687680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,192 15,687,679 15,679,488 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 4ce2a8a5-20c4-4b50-a478-3740d3f6314d ext4
/dev/sda5 bb0fa09b-129e-4e4b-8635-493d53feedd9 swap
/dev/sdb1 1E68-4CE7 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 18 16:43 ata-HL-DT-ST_BDDVDRW_CH10LS20_K98B3PG5839 -> ../../sr0
lrwxrwxrwx 1 root root 9 Feb 18 16:56 ata-OCZ-SOLID3_OCZ-5LOXVP5D61BW65J6 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 18 16:43 ata-OCZ-SOLID3_OCZ-5LOXVP5D61BW65J6-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 18 16:43 ata-OCZ-SOLID3_OCZ-5LOXVP5D61BW65J6-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 18 16:43 ata-OCZ-SOLID3_OCZ-5LOXVP5D61BW65J6-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Feb 18 16:56 usb-JetFlash_Transcend_8GB_NG7PEU2U-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 18 16:43 usb-JetFlash_Transcend_8GB_NG7PEU2U-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Feb 18 16:56 wwn-0x5e83a97ee2c10e40 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 18 16:43 wwn-0x5e83a97ee2c10e40-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 18 16:43 wwn-0x5e83a97ee2c10e40-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 18 16:43 wwn-0x5e83a97ee2c10e40-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4826/mounts) leaked on lvs invocation. Parent PID 9931: bash
File descriptor 63 (pipe:[101233]) leaked on lvs invocation. Parent PID 9931: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-02-18__16h56 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="4ce2a8a5-20c4-4b50-a478-3740d3f6314d" TYPE="ext4"
/dev/sda5: UUID="bb0fa09b-129e-4e4b-8635-493d53feedd9" TYPE="swap"
/dev/sdb1: UUID="1E68-4CE7" TYPE="vfat"
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA OCZ-SOLID3 (scsi)
Disk /dev/sda: 60.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 51.5GB 51.5GB primary ext4
2 51.5GB 60.0GB 8564MB extended
5 51.5GB 60.0GB 8564MB logical linux-swap(v1)
Model: JetFlash Transcend 8GB (scsi)
Disk /dev/sdb: 8032MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4194kB 8032MB 8028MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:60.0GB:scsi:512:512:msdos:ATA OCZ-SOLID3;
1:1049kB:51.5GB:51.5GB:ext4::;
2:51.5GB:60.0GB:8564MB:::;
5:51.5GB:60.0GB:8564MB:linux-swap(v1)::;
BYT;
/dev/sdb:8032MB:scsi:512:512:msdos:JetFlash Transcend 8GB;
1:4194kB:8032MB:8028MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 55.9G OCZ-SOLID3
sda1 part ext4 47.9G 4ce2a8a5-20c4-4b50-a478-3740d3f6314d
sda2 part 1K
sda5 part swap 8G bb0fa09b-129e-4e4b-8635-493d53feedd9
sdb disk 7.5G Transcend
sdb1 part vfat 7.5G 1E68-4CE7
sr0 rom 1024M BDDVDRW CH
loop0 loop squashfs 938.7M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0
sda5 0 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 118M 3.8G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 797M 1.3M 796M 1% /run
/dev/sdb1 vfat 7.5G 2.7G 4.9G 36% /cdrom
/dev/loop0 squashfs 939M 939M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 1.2M 3.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 76K 3.9G 1% /run/shm
none tmpfs 100M 76K 100M 1% /run/user
/dev/sda1 ext4 48G 52M 45G 1% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000412e
Device Boot Start End Blocks Id System
/dev/sda1 2048 100501503 50249728 83 Linux
/dev/sda2 100503550 117229567 8363009 5 Extended
/dev/sda5 100503552 117229567 8363008 82 Linux swap / Solaris
Disk /dev/sdb: 8032 MB, 8032092160 bytes
255 heads, 63 sectors/track, 976 cylinders, total 15687680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 8192 15687679 7839744 b W95 FAT32
No OS or WinEFI system
=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
The boot flag would be placed on sda1.
=================== User settings
The settings chosen by the user will not act on the boot.Je ne sais pas voir d'anomalie là-dedans qui soit en rapport avec le symptôme que tu as décrit dans le post #1.
Pourrais-tu poster le contenu du fichier /var/log/dmesg entre balises(*) ?
(*) j'explique comment utiliser les balises dans ce post :
Quand tu rédiges un message, tu peux voir au-dessus de la fenêtre de composition, le symbole <>
Tu appuies dessus et tout ce que tu mets entre les deux balises qui sont apparues se retrouvera dans le "style terminal". Tu peux aussi rédiger d'abord ton texte, ensuite tu sélectionnes tout ce que tu veux mettre en "style terminal", puis tu appuies sur le symbole <>Dernière modification par malbo (Le 18/02/2015, à 19:06)
Hors ligne
#5 Le 18/02/2015, à 19:26
- Premiumtime
Re : [Résolu] Erreur d'installation ubuntu avec usb
Voila le contenu de /var/log/dmesg ( style terminal ) 
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
[ 0.000000] Command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cefb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cefb7000-0x00000000cf00bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf00c000-0x00000000cf5a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf5a5000-0x00000000cf5b5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5b6000-0x00000000cf5ccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf5cd000-0x00000000cf5cefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf5cf000-0x00000000cf5d6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf5d7000-0x00000000cf5e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e2000-0x00000000cf63dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf63e000-0x00000000cf680fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf681000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8P67 PRO REV 3.1, BIOS 1704 06/08/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 22F800000 mask FFF800000 uncachable
[ 0.000000] 5 base 230000000 mask FF0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 8952MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB
[ 0.000000] reg 6, base: 8952MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcee0-0x000fceef] mapped at [ffff8800000fcee0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22f600000-0x22f7fffff]
[ 0.000000] [mem 0x22f600000-0x22f7fffff] page 2M
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f5fffff]
[ 0.000000] [mem 0x22c000000-0x22f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcefb6fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcedfffff] page 2M
[ 0.000000] [mem 0xcee00000-0xcefb6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcf5cd000-0xcf5cefff]
[ 0.000000] [mem 0xcf5cd000-0xcf5cefff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf681000-0xcf7fffff]
[ 0.000000] [mem 0xcf681000-0xcf7fffff] page 4k
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7ec35000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0420 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cf003068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cf00ba50 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000cf003140 00890D (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cf5d9f80 000040
[ 0.000000] ACPI: APIC 00000000cf00bb48 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000cf00bbc0 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000cf00bcc8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf00bd08 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f7fffff]
[ 0.000000] NODE_DATA [mem 0x22f7f3000-0x22f7f7fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226e00000-ffff88022edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcefb6fff]
[ 0.000000] node 0: [mem 0xcf5cd000-0xcf5cefff]
[ 0.000000] node 0: [mem 0xcf681000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x22f7fffff]
[ 0.000000] On node 0 totalpages: 2091220
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13189 pages used for memmap
[ 0.000000] DMA32 zone: 844088 pages, LIFO batch:31
[ 0.000000] Normal zone: 19424 pages used for memmap
[ 0.000000] Normal zone: 1243136 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcefb7000-0xcf00bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf00c000-0xcf5a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5a5000-0xcf5b5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5b6000-0xcf5ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5cf000-0xcf5d6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5d7000-0xcf5e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e2000-0xcf63dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf63e000-0xcf680fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f400000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058522
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8130364K/8364880K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 234516K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3310.695 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.39 BogoMIPS (lpj=13242780)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000018] Security Framework initialized
[ 0.000031] AppArmor: AppArmor initialized
[ 0.000031] Yama: becoming mindful.
[ 0.000461] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001672] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002174] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002181] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002330] Initializing cgroup subsys memory
[ 0.002335] Initializing cgroup subsys devices
[ 0.002336] Initializing cgroup subsys freezer
[ 0.002337] Initializing cgroup subsys blkio
[ 0.002338] Initializing cgroup subsys perf_event
[ 0.002339] Initializing cgroup subsys hugetlb
[ 0.002354] CPU: Physical Processor ID: 0
[ 0.002355] CPU: Processor Core ID: 0
[ 0.002358] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002358] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002360] mce: CPU supports 9 MCE banks
[ 0.002370] CPU0: Thermal monitoring enabled (TM1)
[ 0.002378] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002378] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002378] tlb_flushall_shift: 5
[ 0.002470] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[ 0.003549] ACPI: Core revision 20131115
[ 0.005380] ACPI: All ACPI Tables successfully acquired
[ 0.107311] ftrace: allocating 28495 entries in 112 pages
[ 0.118028] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.157674] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.157679] TSC deadline timer enabled
[ 0.157686] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.157691] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.157692] ... version: 3
[ 0.157693] ... bit width: 48
[ 0.157694] ... generic registers: 8
[ 0.157695] ... value mask: 0000ffffffffffff
[ 0.157695] ... max period: 0000ffffffffffff
[ 0.157696] ... fixed-purpose events: 3
[ 0.157697] ... event mask: 00000007000000ff
[ 0.158818] x86: Booting SMP configuration:
[ 0.171984] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.158819] .... node #0, CPUs: #1 #2 #3
[ 0.198374] x86: Booted up 1 node, 4 CPUs
[ 0.198377] smpboot: Total of 4 processors activated (26485.56 BogoMIPS)
[ 0.200855] devtmpfs: initialized
[ 0.202883] EVM: security.selinux
[ 0.202884] EVM: security.SMACK64
[ 0.202885] EVM: security.ima
[ 0.202886] EVM: security.capability
[ 0.202916] PM: Registering ACPI NVS region [mem 0xcefb7000-0xcf00bfff] (348160 bytes)
[ 0.202921] PM: Registering ACPI NVS region [mem 0xcf5a5000-0xcf5b5fff] (69632 bytes)
[ 0.202922] PM: Registering ACPI NVS region [mem 0xcf5d7000-0xcf5e1fff] (45056 bytes)
[ 0.202924] PM: Registering ACPI NVS region [mem 0xcf63e000-0xcf680fff] (274432 bytes)
[ 0.203498] pinctrl core: initialized pinctrl subsystem
[ 0.203541] regulator-dummy: no parameters
[ 0.203568] RTC time: 16:43:11, date: 02/18/15
[ 0.203590] NET: Registered protocol family 16
[ 0.203660] cpuidle: using governor ladder
[ 0.203661] cpuidle: using governor menu
[ 0.203687] ACPI: bus type PCI registered
[ 0.203688] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.203727] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.203728] PCI: not using MMCONFIG
[ 0.203729] PCI: Using configuration type 1 for base access
[ 0.204344] bio: create slab <bio-0> at 0
[ 0.204443] ACPI: Added _OSI(Module Device)
[ 0.204444] ACPI: Added _OSI(Processor Device)
[ 0.204445] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204446] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205653] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.207102] ACPI: SSDT 00000000cf5d8918 0003E0 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.207294] ACPI: Dynamic OEM Table Load:
[ 0.207295] ACPI: SSDT (null) 0003E0 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.207314] ACPI: SSDT 00000000cf5d7d98 000120 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.207472] ACPI: Dynamic OEM Table Load:
[ 0.207473] ACPI: SSDT (null) 000120 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.207747] ACPI: Interpreter enabled
[ 0.207753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.207761] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.207762] ACPI: Using IOAPIC for interrupt routing
[ 0.207776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.207809] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.212031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212115] ACPI: No dock devices found.
[ 0.212255] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.215901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.215905] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.215992] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.216071] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.216182] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
[ 0.216184] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.216293] PCI host bridge to bus 0000:00
[ 0.216295] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.216296] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.216297] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.216299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.216300] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.216305] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.216362] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.216385] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.216410] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.216457] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.216480] pci 0000:00:16.0: reg 0x10: [mem 0xfe729000-0xfe72900f 64bit]
[ 0.216550] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.216607] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.216624] pci 0000:00:19.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
[ 0.216632] pci 0000:00:19.0: reg 0x14: [mem 0xfe728000-0xfe728fff]
[ 0.216640] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.216699] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.216728] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.216754] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.216774] pci 0000:00:1a.0: reg 0x10: [mem 0xfe727000-0xfe7273ff]
[ 0.216859] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.216890] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.216915] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.216929] pci 0000:00:1b.0: reg 0x10: [mem 0xfe720000-0xfe723fff 64bit]
[ 0.216992] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.217042] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.217116] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.217149] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.217171] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.217244] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.217278] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.217301] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.217374] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.217408] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.217429] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.217503] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.217537] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.217558] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.217632] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.217666] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.217689] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.217762] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.217796] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.217818] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.217891] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.217925] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.217951] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.217970] pci 0000:00:1d.0: reg 0x10: [mem 0xfe726000-0xfe7263ff]
[ 0.218055] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.218088] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.218112] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.218257] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.218274] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.218281] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.218288] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.218295] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.218302] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.218309] pci 0000:00:1f.2: reg 0x24: [mem 0xfe725000-0xfe7257ff]
[ 0.218354] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218401] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.218415] pci 0000:00:1f.3: reg 0x10: [mem 0xfe724000-0xfe7240ff 64bit]
[ 0.218434] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.218514] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
[ 0.218523] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.218531] pci 0000:01:00.0: reg 0x18: [mem 0xfe600000-0xfe63ffff 64bit]
[ 0.218535] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.218544] pci 0000:01:00.0: reg 0x30: [mem 0xfe640000-0xfe65ffff pref]
[ 0.218572] pci 0000:01:00.0: supports D1 D2
[ 0.218573] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.218602] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.218611] pci 0000:01:00.1: reg 0x10: [mem 0xfe660000-0xfe663fff 64bit]
[ 0.218657] pci 0000:01:00.1: supports D1 D2
[ 0.226358] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.226362] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.226366] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.226371] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226456] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.226536] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.226564] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[ 0.226708] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.234362] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.234372] pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.234458] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.234544] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.234578] pci 0000:05:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.234594] pci 0000:05:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.234610] pci 0000:05:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.234625] pci 0000:05:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.234641] pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.234656] pci 0000:05:00.0: reg 0x24: [mem 0xfe410000-0xfe4101ff]
[ 0.234672] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.234733] pci 0000:05:00.0: PME# supported from D3hot
[ 0.242359] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.242365] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.242371] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.242479] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.242507] pci 0000:06:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
[ 0.242651] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.250354] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.250364] pci 0000:00:1c.4: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.250472] pci 0000:07:00.0: [1b21:1080] type 01 class 0x060401
[ 0.250589] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.250605] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
[ 0.250608] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.250612] pci 0000:00:1c.6: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.250618] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.250619] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250620] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250621] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.250685] pci 0000:08:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.250716] pci 0000:08:03.0: reg 0x10: [mem 0xfe200000-0xfe2007ff]
[ 0.250733] pci 0000:08:03.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.250862] pci 0000:08:03.0: supports D2
[ 0.250863] pci 0000:08:03.0: PME# supported from D2 D3hot D3cold
[ 0.250952] pci 0000:07:00.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.250962] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
[ 0.250967] pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.250977] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.250978] pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff] (subtractive decode)
[ 0.250979] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.250980] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.250982] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.250983] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250985] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250986] pci 0000:07:00.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.251059] pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.251076] pci 0000:09:00.0: reg 0x10: [io 0xb040-0xb047]
[ 0.251088] pci 0000:09:00.0: reg 0x14: [io 0xb030-0xb033]
[ 0.251101] pci 0000:09:00.0: reg 0x18: [io 0xb020-0xb027]
[ 0.251113] pci 0000:09:00.0: reg 0x1c: [io 0xb010-0xb013]
[ 0.251125] pci 0000:09:00.0: reg 0x20: [io 0xb000-0xb00f]
[ 0.251137] pci 0000:09:00.0: reg 0x24: [mem 0xfe110000-0xfe1101ff]
[ 0.251150] pci 0000:09:00.0: reg 0x30: [mem 0xfe100000-0xfe10ffff pref]
[ 0.251206] pci 0000:09:00.0: PME# supported from D3hot
[ 0.258350] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.258356] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.258362] pci 0000:00:1c.7: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.258736] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.258772] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.258806] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.258840] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.258874] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.258908] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.258941] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.258975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.259040] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.259068] Found 1 acpi root devices
[ 0.259079] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.259138] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.259139] vgaarb: loaded
[ 0.259140] vgaarb: bridge control possible 0000:01:00.0
[ 0.259234] SCSI subsystem initialized
[ 0.259256] libata version 3.00 loaded.
[ 0.259269] ACPI: bus type USB registered
[ 0.259280] usbcore: registered new interface driver usbfs
[ 0.259284] usbcore: registered new interface driver hub
[ 0.259297] usbcore: registered new device driver usb
[ 0.259355] PCI: Using ACPI for IRQ routing
[ 0.260670] PCI: pci_cache_line_size set to 64 bytes
[ 0.260734] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.260735] e820: reserve RAM buffer [mem 0xcefb7000-0xcfffffff]
[ 0.260737] e820: reserve RAM buffer [mem 0xcf5cf000-0xcfffffff]
[ 0.260738] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.260739] e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff]
[ 0.260789] NetLabel: Initializing
[ 0.260790] NetLabel: domain hash size = 128
[ 0.260790] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.260800] NetLabel: unlabeled traffic allowed by default
[ 0.260838] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.260842] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.262865] Switched to clocksource hpet
[ 0.265791] AppArmor: AppArmor Filesystem Enabled
[ 0.265808] pnp: PnP ACPI init
[ 0.265816] ACPI: bus type PNP registered
[ 0.265905] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.265907] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.265908] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.265909] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.265911] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.265913] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265968] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.265969] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265977] pnp 00:02: [dma 4]
[ 0.265987] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.266007] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.266021] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.266051] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.266053] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266068] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266217] pnp 00:07: [dma 0 disabled]
[ 0.266247] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266341] system 00:08: [io 0x0400-0x0453] could not be reserved
[ 0.266342] system 00:08: [io 0x0458-0x047f] has been reserved
[ 0.266344] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.266345] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.266347] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.266348] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.266350] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.266351] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.266386] system 00:09: [io 0x0454-0x0457] has been reserved
[ 0.266388] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.266476] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.266557] pnp: PnP ACPI: found 11 devices
[ 0.266558] ACPI: bus type PNP unregistered
[ 0.272345] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe4000000-0xe40fffff pref]
[ 0.272347] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.272349] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.272351] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.272353] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.272355] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.272365] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.272370] pci 0000:00:1c.1: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.272377] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.272388] pci 0000:05:00.0: BAR 6: assigned [mem 0xe4000000-0xe400ffff pref]
[ 0.272390] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.272392] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.272397] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.272400] pci 0000:00:1c.3: bridge window [mem 0xe4000000-0xe40fffff pref]
[ 0.272406] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.272410] pci 0000:00:1c.4: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.272418] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.272421] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
[ 0.272429] pci 0000:07:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.272442] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
[ 0.272445] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.272449] pci 0000:00:1c.6: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.272457] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.272459] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.272463] pci 0000:00:1c.7: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.272471] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.272473] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.272474] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.272475] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[ 0.272477] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.272478] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.272479] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.272480] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.272482] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.272483] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.272484] pci_bus 0000:05: resource 2 [mem 0xe4000000-0xe40fffff pref]
[ 0.272485] pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.272487] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.272488] pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.272489] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.272490] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.272491] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.272493] pci_bus 0000:07: resource 7 [mem 0xd0000000-0xffffffff]
[ 0.272494] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.272495] pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.272496] pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
[ 0.272497] pci_bus 0000:08: resource 5 [mem 0xfe200000-0xfe2fffff]
[ 0.272498] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
[ 0.272500] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
[ 0.272501] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.272502] pci_bus 0000:08: resource 11 [mem 0xd0000000-0xffffffff]
[ 0.272503] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
[ 0.272504] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.272523] NET: Registered protocol family 2
[ 0.272636] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.272750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272850] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.272863] TCP: reno registered
[ 0.272871] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272894] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272938] NET: Registered protocol family 1
[ 0.526708] pci 0000:01:00.0: Boot video device
[ 0.526910] PCI: CLS 64 bytes, default 64
[ 0.526947] Trying to unpack rootfs image as initramfs...
[ 3.492567] Freeing initrd memory: 20264K (ffff88007ec35000 - ffff88007ffff000)
[ 3.492572] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.492573] software IO TLB [mem 0xcafb7000-0xcefb7000] (64MB) mapped at [ffff8800cafb7000-ffff8800cefb6fff]
[ 3.492745] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x17
[ 3.492750] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x17
[ 3.492756] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x17
[ 3.492760] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x17
[ 3.492796] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.492797] Scanning for low memory corruption every 60 seconds
[ 3.492971] Initialise system trusted keyring
[ 3.493002] audit: initializing netlink socket (disabled)
[ 3.493013] type=2000 audit(1424277794.396:1): initialized
[ 3.511816] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.512568] zbud: loaded
[ 3.512663] VFS: Disk quotas dquot_6.5.2
[ 3.512686] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.512940] fuse init (API version 7.22)
[ 3.512982] msgmni has been set to 15919
[ 3.513013] Key type big_key registered
[ 3.513304] Key type asymmetric registered
[ 3.513305] Asymmetric key parser 'x509' registered
[ 3.513330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.513356] io scheduler noop registered
[ 3.513357] io scheduler deadline registered (default)
[ 3.513372] io scheduler cfq registered
[ 3.513492] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.513574] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 3.513639] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 3.513733] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 3.513829] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 3.513890] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 3.513985] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
[ 3.514047] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 3.514048] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.514049] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 3.514051] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 3.514065] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.514069] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.514084] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.514085] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.514088] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.514102] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 3.514106] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 3.514119] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 3.514121] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 3.514124] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 3.514138] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 3.514139] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 3.514143] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 3.514157] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 3.514158] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 3.514162] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 3.514169] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.514178] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.514205] intel_idle: MWAIT substates: 0x1120
[ 3.514206] intel_idle: v0.4 model 0x2A
[ 3.514207] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.514262] ipmi message handler version 39.2
[ 3.514307] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.514310] ACPI: Power Button [PWRB]
[ 3.514331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.514332] ACPI: Power Button [PWRF]
[ 3.514641] GHES: HEST is not enabled!
[ 3.514693] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.535084] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.536105] Linux agpgart interface v0.103
[ 3.536888] brd: module loaded
[ 3.537294] loop: module loaded
[ 3.537492] libphy: Fixed MDIO Bus: probed
[ 3.537540] tun: Universal TUN/TAP device driver, 1.6
[ 3.537541] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.537564] PPP generic driver version 2.4.2
[ 3.537588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.537590] ehci-pci: EHCI PCI platform driver
[ 3.537651] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.537656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.537667] ehci-pci 0000:00:1a.0: debug port 2
[ 3.541547] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.541558] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe727000
[ 3.551780] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.551808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.551810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.551811] usb usb1: Product: EHCI Host Controller
[ 3.551812] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.551813] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.551908] hub 1-0:1.0: USB hub found
[ 3.551913] hub 1-0:1.0: 2 ports detected
[ 3.552025] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.552028] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.552039] ehci-pci 0000:00:1d.0: debug port 2
[ 3.555938] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.555941] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe726000
[ 3.567807] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.567874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.567875] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.567877] usb usb2: Product: EHCI Host Controller
[ 3.567878] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.567879] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.568010] hub 2-0:1.0: USB hub found
[ 3.568017] hub 2-0:1.0: 2 ports detected
[ 3.568080] ehci-platform: EHCI generic platform driver
[ 3.568085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.568086] ohci-pci: OHCI PCI platform driver
[ 3.568091] ohci-platform: OHCI generic platform driver
[ 3.568094] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.568151] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 3.568155] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 3.575128] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 3.575131] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 3.575135] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 3.575138] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 3.575141] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 3.575237] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.575238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.575240] usb usb3: Product: xHCI Host Controller
[ 3.575241] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.575242] usb usb3: SerialNumber: 0000:03:00.0
[ 3.575364] hub 3-0:1.0: USB hub found
[ 3.575375] hub 3-0:1.0: 2 ports detected
[ 3.575429] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 3.575432] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 3.580343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.580344] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.580345] usb usb4: Product: xHCI Host Controller
[ 3.580347] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.580348] usb usb4: SerialNumber: 0000:03:00.0
[ 3.580468] hub 4-0:1.0: USB hub found
[ 3.580479] hub 4-0:1.0: 2 ports detected
[ 3.587943] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 3.587948] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 3.594919] xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
[ 3.594923] xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
[ 3.594926] xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
[ 3.594929] xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
[ 3.594933] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
[ 3.595030] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.595031] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.595032] usb usb5: Product: xHCI Host Controller
[ 3.595033] usb usb5: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.595035] usb usb5: SerialNumber: 0000:06:00.0
[ 3.595157] hub 5-0:1.0: USB hub found
[ 3.595168] hub 5-0:1.0: 2 ports detected
[ 3.595221] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 3.595224] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 3.600135] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.600137] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.600138] usb usb6: Product: xHCI Host Controller
[ 3.600139] usb usb6: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.600140] usb usb6: SerialNumber: 0000:06:00.0
[ 3.600261] hub 6-0:1.0: USB hub found
[ 3.600272] hub 6-0:1.0: 2 ports detected
[ 3.607903] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.610663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.610668] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.610866] mousedev: PS/2 mouse device common for all mice
[ 3.611073] rtc_cmos 00:03: RTC can wake from S4
[ 3.611208] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.611236] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.611275] device-mapper: uevent: version 1.0.3
[ 3.611340] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 3.611343] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.611404] TCP: cubic registered
[ 3.611452] NET: Registered protocol family 10
[ 3.611555] NET: Registered protocol family 17
[ 3.611562] Key type dns_resolver registered
[ 3.611956] Loading compiled-in X.509 certificates
[ 3.612617] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[ 3.612625] registered taskstats version 1
[ 3.614657] Key type trusted registered
[ 3.616495] Key type encrypted registered
[ 3.618359] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.618362] IMA: No TPM chip found, activating TPM-bypass!
[ 3.618694] regulator-dummy: disabling
[ 3.618841] Magic number: 3:708:742
[ 3.618943] rtc_cmos 00:03: setting system clock to 2015-02-18 16:43:14 UTC (1424277794)
[ 3.619414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.619415] EDD information not available.
[ 3.619444] PM: Hibernation image not present or could not be loaded.
[ 3.620448] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 3.620449] Write protecting the kernel read-only data: 12288k
[ 3.621968] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[ 3.623187] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[ 3.632773] systemd-udevd[117]: starting version 204
[ 3.640174] wmi: Mapper loaded
[ 3.645484] pps_core: LinuxPPS API ver. 1 registered
[ 3.645486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.646350] PTP clock support registered
[ 3.647653] [drm] Initialized drm 1.1.0 20060810
[ 3.649438] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.649439] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.649557] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.649576] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
[ 3.667274] [drm] radeon kernel modesetting enabled.
[ 3.667440] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1462:0x2710).
[ 3.667466] [drm] register mmio base: 0xFE600000
[ 3.667466] [drm] register mmio size: 262144
[ 3.667513] ATOM BIOS: 113
[ 3.667676] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.667677] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 3.667678] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.667679] [drm] RAM width 128bits DDR
[ 3.667757] [TTM] Zone kernel: Available graphics memory: 4076754 kiB
[ 3.667759] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.667760] [TTM] Initializing pool allocator
[ 3.667763] [TTM] Initializing DMA pool allocator
[ 3.667773] [drm] radeon: 1024M of VRAM memory ready
[ 3.667774] [drm] radeon: 1024M of GTT memory ready.
[ 3.667781] [drm] Loading VERDE Microcode
[ 3.667832] [drm] radeon/VERDE_mc2.bin: 31500 bytes
[ 3.668054] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 3.668865] [drm] probing gen 2 caps for device 8086:101 = 2212102/0
[ 3.668870] [drm] PCIE gen 2 link speeds already enabled
[ 3.684637] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 3.684738] radeon 0000:01:00.0: WB enabled
[ 3.684740] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222d7ec00
[ 3.684741] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880222d7ec04
[ 3.684743] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880222d7ec08
[ 3.684744] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880222d7ec0c
[ 3.684745] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880222d7ec10
[ 3.685231] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90005035a18
[ 3.685232] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.685233] [drm] Driver supports precise vblank timestamp query.
[ 3.685248] radeon 0000:01:00.0: irq 58 for MSI/MSI-X
[ 3.685257] radeon 0000:01:00.0: radeon: using MSI.
[ 3.685279] [drm] radeon: irq initialized.
[ 3.719681] firewire_ohci 0000:08:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.863551] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.912369] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.912371] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 14:da:e9:be:0c:d8
[ 3.912372] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.912422] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 3.912445] ahci 0000:00:1f.2: version 3.0
[ 3.912548] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
[ 3.927483] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x14 impl SATA mode
[ 3.927486] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 3.935807] scsi0 : ahci
[ 3.936015] scsi1 : ahci
[ 3.936172] scsi2 : ahci
[ 3.936373] scsi3 : ahci
[ 3.936495] scsi4 : ahci
[ 3.936585] scsi5 : ahci
[ 3.936620] ata1: DUMMY
[ 3.936621] ata2: DUMMY
[ 3.936624] ata3: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725200 irq 59
[ 3.936625] ata4: DUMMY
[ 3.936627] ata5: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725300 irq 59
[ 3.936628] ata6: DUMMY
[ 3.936770] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 3.936772] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 3.936936] scsi6 : ahci
[ 3.936980] scsi7 : ahci
[ 3.937008] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 19
[ 3.937011] ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 19
[ 3.937077] ahci 0000:09:00.0: irq 60 for MSI/MSI-X
[ 3.937150] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.937151] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.937327] scsi8 : ahci
[ 3.937413] scsi9 : ahci
[ 3.937442] ata9: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110100 irq 60
[ 3.937445] ata10: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110180 irq 60
[ 3.999856] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.999859] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.000127] hub 1-1:1.0: USB hub found
[ 4.000200] hub 1-1:1.0: 6 ports detected
[ 4.111289] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.155843] [drm] ring test on 0 succeeded in 1 usecs
[ 4.155848] [drm] ring test on 1 succeeded in 1 usecs
[ 4.155851] [drm] ring test on 2 succeeded in 1 usecs
[ 4.155916] [drm] ring test on 3 succeeded in 4 usecs
[ 4.155923] [drm] ring test on 4 succeeded in 1 usecs
[ 4.219227] firewire_core 0000:08:03.0: created device fw0: GUID 001fc6000017f90e, S400
[ 4.243498] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.243500] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.243756] hub 2-1:1.0: USB hub found
[ 4.243814] hub 2-1:1.0: 8 ports detected
[ 4.255145] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.255155] ata10: SATA link down (SStatus 0 SControl 300)
[ 4.255180] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.255236] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.255277] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.255313] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.263205] ata3.00: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.00, max UDMA/133
[ 4.267077] ata5.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
[ 4.267079] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.267193] ata3.00: configured for UDMA/133
[ 4.276358] scsi 2:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH10LS20 1.00 PQ: 0 ANSI: 5
[ 4.277057] ata5.00: configured for UDMA/133
[ 4.285410] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.285412] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.285572] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.285701] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 4.286004] scsi 4:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
[ 4.286093] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.286114] sd 4:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 4.286276] sd 4:0:0:0: [sda] Write Protect is off
[ 4.286278] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.286355] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.286904] sda: sda1 sda2 < sda5 >
[ 4.287149] sd 4:0:0:0: [sda] Attached SCSI disk
[ 4.315142] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 4.341371] [drm] ring test on 5 succeeded in 2 usecs
[ 4.341376] [drm] UVD initialized successfully.
[ 4.342555] [drm] Enabling audio 0 support
[ 4.342556] [drm] Enabling audio 1 support
[ 4.342557] [drm] Enabling audio 2 support
[ 4.342558] [drm] Enabling audio 3 support
[ 4.342559] [drm] Enabling audio 4 support
[ 4.342559] [drm] Enabling audio 5 support
[ 4.342628] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.342665] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.342700] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.342745] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.342784] [drm] ib test on ring 4 succeeded in 1 usecs
[ 4.492527] tsc: Refined TSC clocksource calibration: 3310.802 MHz
[ 4.493254] [drm] ib test on ring 5 succeeded
[ 4.493645] [drm] Radeon Display Connectors
[ 4.493647] [drm] Connector 0:
[ 4.493647] [drm] DP-1
[ 4.493648] [drm] HPD4
[ 4.493649] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.493650] [drm] Encoders:
[ 4.493651] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.493651] [drm] Connector 1:
[ 4.493652] [drm] HDMI-A-1
[ 4.493652] [drm] HPD1
[ 4.493653] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.493654] [drm] Encoders:
[ 4.493654] [drm] DFP2: INTERNAL_UNIPHY2
[ 4.493655] [drm] Connector 2:
[ 4.493656] [drm] DVI-I-1
[ 4.493656] [drm] HPD2
[ 4.493657] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.493658] [drm] Encoders:
[ 4.493658] [drm] DFP3: INTERNAL_UNIPHY
[ 4.493659] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.493713] [drm] Internal thermal controller with fan control
[ 4.493743] [drm] probing gen 2 caps for device 8086:101 = 2212102/0
[ 4.725126] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6387
[ 4.725128] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.725129] usb 1-1.1: Product: Mass Storage Device
[ 4.725131] usb 1-1.1: Manufacturer: JetFlash
[ 4.725132] usb 1-1.1: SerialNumber: NG7PEU2U
[ 4.727528] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 4.727759] scsi10 : usb-storage 1-1.1:1.0
[ 4.727810] usbcore: registered new interface driver usb-storage
[ 4.794685] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 5.116881] usb 1-1.2: New USB device found, idVendor=1532, idProduct=0001
[ 5.116884] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.116885] usb 1-1.2: Product: Razer 1600dpi Mouse
[ 5.116886] usb 1-1.2: Manufacturer: Razer
[ 5.121556] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.126440] usbcore: registered new interface driver usbhid
[ 5.126442] usbhid: USB HID core driver
[ 5.127573] input: Razer Razer 1600dpi Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 5.127724] hid-generic 0003:1532:0001.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer 1600dpi Mouse] on usb-0000:00:1a.0-1.2/input0
[ 5.190314] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 5.286386] usb 2-1.1: New USB device found, idVendor=1532, idProduct=0109
[ 5.286388] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.286390] usb 2-1.1: Product: Razer Lycosa
[ 5.286391] usb 2-1.1: Manufacturer: Razer
[ 5.289246] input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input6
[ 5.289473] hid-generic 0003:1532:0109.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:1d.0-1.1/input0
[ 5.292135] input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input7
[ 5.292356] hid-generic 0003:1532:0109.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:1d.0-1.1/input1
[ 5.362152] usb 2-1.7: new full-speed USB device number 4 using ehci-pci
[ 5.454689] usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[ 5.454691] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.731248] Switched to clocksource tsc
[ 5.731257] [drm] radeon: dpm initialized
[ 5.732180] scsi 10:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
[ 5.732315] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 5.733522] sd 10:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 5.734193] sd 10:0:0:0: [sdb] Write Protect is off
[ 5.734196] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.734796] sd 10:0:0:0: [sdb] No Caching mode page found
[ 5.734798] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 5.737650] sd 10:0:0:0: [sdb] No Caching mode page found
[ 5.737654] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 5.746577] sdb: sdb1
[ 5.749405] sd 10:0:0:0: [sdb] No Caching mode page found
[ 5.749407] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 5.749409] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 5.773100] [drm] fb mappable at 0xD1488000
[ 5.773101] [drm] vram apper at 0xD0000000
[ 5.773102] [drm] size 8294400
[ 5.773102] [drm] fb depth is 24
[ 5.773103] [drm] pitch is 7680
[ 5.773214] fbcon: radeondrmfb (fb0) is primary device
[ 6.396674] Console: switching to colour frame buffer device 240x67
[ 6.399638] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 6.399639] radeon 0000:01:00.0: registered panic notifier
[ 6.399646] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 6.597376] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.027804] random: nonblocking pool is initialized
[ 7.739306] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 12.241562] Adding 8363004k swap on /dev/sda5. Priority:-1 extents:1 across:8363004k SSFS
[ 12.258524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.354389] systemd-udevd[1071]: starting version 204
[ 12.522945] lp: driver loaded but no devices found
[ 12.534656] ppdev: user-space parallel port driver
[ 12.580046] init: cups main process (1109) killed by HUP signal
[ 12.580055] init: cups main process ended, respawning
[ 12.620007] Bluetooth: Core ver 2.17
[ 12.620019] NET: Registered protocol family 31
[ 12.620020] Bluetooth: HCI device and connection manager initialized
[ 12.620025] Bluetooth: HCI socket layer initialized
[ 12.620027] Bluetooth: L2CAP socket layer initialized
[ 12.620029] Bluetooth: SCO socket layer initialized
[ 12.661105] Bluetooth: RFCOMM TTY layer initialized
[ 12.661113] Bluetooth: RFCOMM socket layer initialized
[ 12.661116] Bluetooth: RFCOMM ver 1.11
[ 12.672794] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.672797] Bluetooth: BNEP filters: protocol multicast
[ 12.672803] Bluetooth: BNEP socket layer initialized
[ 12.695841] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20131115/utaddress-251)
[ 12.695845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.695847] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20131115/utaddress-251)
[ 12.695849] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.695850] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20131115/utaddress-251)
[ 12.695851] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.695852] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.782040] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[ 12.860396] device-mapper: multipath: version 1.6.0 loaded
[ 12.870441] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[ 12.899340] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 12.899342] SKU: port_connectivity=0x1
[ 12.899343] SKU: enable_pcbeep=0x0
[ 12.899344] SKU: check_sum=0x00000005
[ 12.899344] SKU: customization=0x000000e6
[ 12.899345] SKU: external_amp=0x0
[ 12.899346] SKU: platform_type=0x0
[ 12.899346] SKU: swap=0x0
[ 12.899347] SKU: override=0x1
[ 12.899797] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.899798] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.899799] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.899799] mono: mono_out=0x0
[ 12.899800] dig-out=0x11/0x1e
[ 12.899801] inputs:
[ 12.899802] Front Mic=0x19
[ 12.899803] Rear Mic=0x18
[ 12.899804] Line=0x1a
[ 12.899805] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 12.899806] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 12.935430] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 12.935432] hda-intel 0000:01:00.1: Using LPIB position fix
[ 12.935433] hda-intel 0000:01:00.1: Force to non-snoop mode
[ 12.935460] snd_hda_intel 0000:01:00.1: irq 63 for MSI/MSI-X
[ 12.937772] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 12.967267] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967307] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967346] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967385] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967425] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967465] HDMI ATI/AMD: no speaker allocation for ELD
[ 12.967511] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 12.968601] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 12.970905] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 12.970962] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 12.970994] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 12.971058] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 12.980725] asus_wmi: ASUS WMI generic driver loaded
[ 12.996707] asus_wmi: Initialization: 0x0
[ 12.996723] asus_wmi: BIOS WMI version: 0.9
[ 12.996747] asus_wmi: SFUN value: 0x0
[ 12.997767] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
[ 12.998996] init: failsafe main process (1309) killed by TERM signal
[ 12.999149] asus_wmi: Disabling ACPI video driver
[ 13.010887] kvm: disabled by bios
[ 13.027414] kvm: disabled by bios
[ 13.083474] usbcore: registered new interface driver ath3k
[ 13.276621] usb 2-1.7: USB disconnect, device number 4
[ 13.287501] intel_rapl: domain uncore energy ctr 0:0 not working, skipHors ligne
#6 Le 18/02/2015, à 19:47
- malbo
Re : [Résolu] Erreur d'installation ubuntu avec usb
On voit bien que ton SSD est identifié comme "ata5" :
[ 4.267077] ata5.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133Les soucis que tu as décrit dans le post #1 sont bien dus à une difficulté à écrire sur ce SSD. Aurais-tu la possibilité d'améliorer la qualité de la connexion entre le SSD et la carte-mère ? Dans la majorité des cas et quelque soit le standard de communication, c'est la connexion la plus courte qui est la meilleure. Donc si tu utilises une connexion SATA un peu longue et que tu as la possibilité de faire un essai avec une connexion plus courte, je te recommande de faire l'essai. Même si c'est provisoire : le but c'est de voir si ça supprime le pb ou pas. S'il s'avère que c'est la cause, je ne doute pas que tu sauras te débrouiller pour trouver la solution définitive.
Hors ligne
#7 Le 18/02/2015, à 19:53
- Premiumtime
Re : [Résolu] Erreur d'installation ubuntu avec usb
J'utilise en effet une connexion SATA. Je vais essayer avec un cable plus court (si j'en trouve un).
Et je viendrai donner suite.
Merci de votre aide.
Hors ligne
#8 Le 19/02/2015, à 13:19
- Premiumtime
Re : [Résolu] Erreur d'installation ubuntu avec usb
Bonjour,
Suite à la discussion d'hier, je n'ai pas trouvé de câble SATA plus court, en revanche je l'ai quand même changer pour un autre. Et l'installation c'est effectuer avec succès.
Merci pour votre aide.
cordialement
Hors ligne
#9 Le 19/02/2015, à 14:12
- malbo
Re : [Résolu] Erreur d'installation ubuntu avec usb
Formidable. Mets une étiquette avec la mention "défectueux" sur le câble qui a été remplacé sinon dans quelques années tu auras oublié, tu vas le remettre dans une machine et tu vas recommencer à galérer...
Dernière modification par malbo (Le 19/02/2015, à 14:16)
Hors ligne