#1 Le 22/02/2015, à 11:35
- SYLLAB
[résolu] HELP ubuntu planté pendant mise à jour
Bonjour à tous, je vous renvoie un message de demande d'aide car je suis totalement bloquée.
hier, en faisant la mise à jour de la nouvelle version ubuntu (je dirais ubuntu14) mon ordi a planté.
j'ai essayé quelques manip mais rien ne marche,les réponses sont : impossible car en lecture seul.
je suis sur un netbook Eee PC
est-ce que quelqu'un pourrait m'accompagner sur ce problème? pistes de manip ou re-installation?
Merci d'avance à tous
Syllab
Dernière modification par SYLLAB (Le 23/02/2015, à 13:19)
Hors ligne
#2 Le 22/02/2015, à 12:09
- malbo
Re : [résolu] HELP ubuntu planté pendant mise à jour
Je te prie de faire un Boot-Info et donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#3 Le 22/02/2015, à 12:46
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
Bonjour et merci de votre réponse
je n'accède à rien actuellement je pense qu'il faut que je fasse un liveUSB pour vous donner ces infos? je vais essayer de le faire en suivant la demarche sur la documentation car je ne jamais fait ca
Hors ligne
#4 Le 22/02/2015, à 13:27
- malbo
Re : [résolu] HELP ubuntu planté pendant mise à jour
je pense qu'il faut que je fasse un liveUSB pour vous donner ces infos?
Oui.
D'autre part, peux-tu préciser le nom du modèle de ton ordi et son fabricant ?
Dernière modification par malbo (Le 22/02/2015, à 13:32)
Hors ligne
#5 Le 22/02/2015, à 13:45
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
C'est un ASUS Eee PC 1001PX
voici l'url : http://paste.ubuntu.com/10355446/
merci de votre aide
Syllab
Hors ligne
#6 Le 22/02/2015, à 16:19
- malbo
Re : [résolu] HELP ubuntu planté pendant mise à jour
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2683816 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 482,256,895 482,254,848 83 Linux
/dev/sda2 482,258,942 488,396,799 6,137,858 5 Extended
/dev/sda5 482,258,944 488,396,799 6,137,856 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8022 MB, 8022654976 bytes
94 heads, 14 sectors/track, 11906 cylinders, total 15669248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 15,669,247 15,669,216 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 599ecd71-67d3-0e42-a2ba-1cead6dfefa6 ext2
/dev/sda1 069d6ebe-8154-4924-be66-4337581cc41c ext4
/dev/sda5 c562e4b3-172c-4e23-9e81-dc68cb78bc2b swap
/dev/sdb1 0869-9957 vfat STORE N GO
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 22 11:43 ata-ST9250315AS_6VC55LGF -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Feb 22 11:43 usb-Verbatim_STORE_N_GO_122700000000077B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 22 2015 usb-Verbatim_STORE_N_GO_122700000000077B-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Feb 22 11:43 wwn-0x5000c50022d8a165 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-74-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-74-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-74-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-74-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-74-generic ...'
linux /boot/vmlinuz-3.2.0-74-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-74-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-65-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-65-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-65-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-65-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-65-generic ...'
linux /boot/vmlinuz-3.2.0-65-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-65-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-63-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-63-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-63-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-63-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-63-generic ...'
linux /boot/vmlinuz-3.2.0-63-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-63-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=c562e4b3-172c-4e23-9e81-dc68cb78bc2b none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/23818/mounts) leaked on lvs invocation. Parent PID 29552: bash
File descriptor 63 (pipe:[72112]) leaked on lvs invocation. Parent PID 29552: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-02-22__11h43 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="599ecd71-67d3-0e42-a2ba-1cead6dfefa6" TYPE="ext2"
/dev/sda1: UUID="069d6ebe-8154-4924-be66-4337581cc41c" TYPE="ext4"
/dev/sda5: UUID="c562e4b3-172c-4e23-9e81-dc68cb78bc2b" TYPE="swap"
/dev/sdb1: LABEL="STORE N GO" UUID="0869-9957" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 22 14:47 grub.d
total 60
-rwxr-xr-x 1 root root 7806 déc. 6 2013 00_header
-rwxr-xr-x 1 root root 5522 avril 21 2011 05_debian_theme
-rwxr-xr-x 1 root root 7877 déc. 6 2013 10_linux
-rwxr-xr-x 1 root root 6449 déc. 6 2013 20_linux_xen
-rwxr-xr-x 1 root root 1588 sept. 24 2010 20_memtest86+
-rwxr-xr-x 1 root root 6675 déc. 6 2013 30_os-prober
-rwxr-xr-x 1 root root 1388 déc. 10 2012 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 6 2010 40_custom
-rwxr-xr-x 1 root root 95 oct. 6 2010 41_custom
-rw-r--r-- 1 root root 483 oct. 6 2010 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST9250315AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 247GB 247GB primary ext4 boot
2 247GB 250GB 3143MB extended
5 247GB 250GB 3143MB logical linux-swap(v1)
Model: Verbatim STORE N GO (scsi)
Disk /dev/sdb: 8023MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 16.4kB 8023MB 8023MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA ST9250315AS;
1:1049kB:247GB:247GB:ext4::boot;
2:247GB:250GB:3143MB:::;
5:247GB:250GB:3143MB:linux-swap(v1)::;
BYT;
/dev/sdb:8023MB:scsi:512:512:msdos:Verbatim STORE N GO;
1:16.4kB:8023MB:8023MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 232,9G ST925031
sda1 part ext4 230G 069d6ebe-8154-4924-be66-4337581cc41c
sda2 part 1K
sda5 part swap 2,9G c562e4b3-172c-4e23-9e81-dc68cb78bc2b
sdb disk 7,5G STORE N
sdb1 part vfat 7,5G STORE N GO
0869-9957
loop0 loop squashfs 953M
loop1 loop ext2 300M 599ecd71-67d3-0e42-a2ba-1cead6dfefa6
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda5 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
loop0 1 1 0 /rofs
loop1 1 0 0
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
gvfsd-fuse on /home/ubuntu/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog media0 mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 291M 138M 139M 50% /
udev devtmpfs 481M 12K 481M 1% /dev
tmpfs tmpfs 99M 1.2M 98M 2% /run
/dev/sdb1 vfat 7.5G 1.5G 6.1G 19% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 493M 1.8M 491M 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 493M 80K 493M 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sda1 ext4 227G 193G 23G 90% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00073bc6
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 482256895 241127424 83 Linux
/dev/sda2 482258942 488396799 3068929 5 Extended
/dev/sda5 482258944 488396799 3068928 82 Linux swap / Solaris
Disk /dev/sdb: 8022 MB, 8022654976 bytes
94 heads, 14 sectors/track, 11906 cylinders, total 15669248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 32 15669247 7834608 b W95 FAT32
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
ton Ubuntu installé est une version 32 bits. Je le vois dans cet extrait (c'est "32" qui indique que c'est une version 32 bits) :
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32,
Si tu veux réparer une version 32 bits, il faut que ta liveUSB soit réalisée avec l'ISO de la version 32 bits de Ubuntu, ce qui n'est pas le cas actuellement comme on peut voir dans cet autre extrait :
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-02-22__11h43 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
"x86_64" veut dire que c'est une version 64 bits qui se trouve sur la LiveUSB.
Télécharge une version 32 bits de l'ISO de Ubuntu et refais ta LiveUSB avec l'ISO téléchargé. Quand ce sera fait, refais un Boot-Info et donne l'URL dans ta réponse pour qu'on puisse vérifier.
Hors ligne
#7 Le 22/02/2015, à 16:21
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
en attendant j'ai lancé ce processus
#! /bin/bash
#Passer en root:
sudo -s
#Monter la partition système contenant Linux sur votre disque dur: (sudo fdisk -l donne la liste des partitions, remplacer sda1 par le nom de la partition contenant Ubuntu (si nécessaire)):
mount /dev/sda1 /mnt
#Monter /dev, /proc et copier les points de montages dans ce point de montage:
mount -o bind /dev /mnt/dev
mount -o bind /proc /mnt/proc
cp /proc/mounts /mnt/etc/mtab
#Se chrooter dans ce système:
chroot /mnt
suivi de
sudo dpkg --configure -a && sudo apt-get clean && sudo apt-get update && sudo apt-get dist-upgrade && sudo apt-get -f install
la réponse est : l'exécution a été arrêtée car il y avait trop d'erreurs.
Hors ligne
#8 Le 22/02/2015, à 16:23
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
Ah oui, je n'ai pas du tout fait gaffe à ça, je fais refaire ma clé en 32!
Hors ligne
#9 Le 22/02/2015, à 17:14
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
voici le nouveau rapport : http://paste.ubuntu.com/10357823/
Hors ligne
#10 Le 23/02/2015, à 08:46
- malbo
Re : [résolu] HELP ubuntu planté pendant mise à jour
Ton dernier Boot-Info :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2699416 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 482,256,895 482,254,848 83 Linux
/dev/sda2 482,258,942 488,396,799 6,137,858 5 Extended
/dev/sda5 482,258,944 488,396,799 6,137,856 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8022 MB, 8022654976 bytes
94 heads, 14 sectors/track, 11906 cylinders, total 15669248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 15,669,247 15,669,216 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 ca856bba-2d7d-d14e-9f8d-a5410d27de0a ext2
/dev/sda1 069d6ebe-8154-4924-be66-4337581cc41c ext4
/dev/sda5 c562e4b3-172c-4e23-9e81-dc68cb78bc2b swap
/dev/sdb1 9028-FC3E vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 22 15:12 ata-ST9250315AS_6VC55LGF -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 22 2015 ata-ST9250315AS_6VC55LGF-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Feb 22 15:12 usb-Verbatim_STORE_N_GO_122700000000077B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 22 2015 usb-Verbatim_STORE_N_GO_122700000000077B-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Feb 22 15:12 wwn-0x5000c50022d8a165 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 22 2015 wwn-0x5000c50022d8a165-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.2.0-74-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-74-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-74-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-74-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-74-generic ...'
linux /boot/vmlinuz-3.2.0-74-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-74-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-65-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-65-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-65-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-65-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-65-generic ...'
linux /boot/vmlinuz-3.2.0-65-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-65-generic
}
menuentry 'Ubuntu, avec Linux 3.2.0-63-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux /boot/vmlinuz-3.2.0-63-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-63-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-63-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
echo 'Chargement de Linux 3.2.0-63-generic ...'
linux /boot/vmlinuz-3.2.0-63-generic root=UUID=069d6ebe-8154-4924-be66-4337581cc41c ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-63-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 069d6ebe-8154-4924-be66-4337581cc41c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=c562e4b3-172c-4e23-9e81-dc68cb78bc2b none swap sw 0 0
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/7442/mounts) leaked on lvs invocation. Parent PID 13164: bash
File descriptor 63 (pipe:[52661]) leaked on lvs invocation. Parent PID 13164: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-02-22__15h12 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, i686)
CPU op-mode(s): 32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="ca856bba-2d7d-d14e-9f8d-a5410d27de0a" TYPE="ext2"
/dev/sda1: UUID="069d6ebe-8154-4924-be66-4337581cc41c" TYPE="ext4"
/dev/sda5: UUID="c562e4b3-172c-4e23-9e81-dc68cb78bc2b" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="9028-FC3E" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 22 14:47 grub.d
total 60
-rwxr-xr-x 1 root root 7806 déc. 6 2013 00_header
-rwxr-xr-x 1 root root 5522 avril 21 2011 05_debian_theme
-rwxr-xr-x 1 root root 7877 déc. 6 2013 10_linux
-rwxr-xr-x 1 root root 6449 déc. 6 2013 20_linux_xen
-rwxr-xr-x 1 root root 1588 sept. 24 2010 20_memtest86+
-rwxr-xr-x 1 root root 6675 déc. 6 2013 30_os-prober
-rwxr-xr-x 1 root root 1388 déc. 10 2012 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 6 2010 40_custom
-rwxr-xr-x 1 root root 95 oct. 6 2010 41_custom
-rw-r--r-- 1 root root 483 oct. 6 2010 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST9250315AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 247GB 247GB primary ext4 boot
2 247GB 250GB 3143MB extended
5 247GB 250GB 3143MB logical linux-swap(v1)
Model: Verbatim STORE N GO (scsi)
Disk /dev/sdb: 8023MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 16.4kB 8023MB 8023MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA ST9250315AS;
1:1049kB:247GB:247GB:ext4::boot;
2:247GB:250GB:3143MB:::;
5:247GB:250GB:3143MB:linux-swap(v1)::;
BYT;
/dev/sdb:8023MB:scsi:512:512:msdos:Verbatim STORE N GO;
1:16.4kB:8023MB:8023MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 232,9G ST925031
sda1 part ext4 230G 069d6ebe-8154-4924-be66-4337581cc41c
sda2 part 1K
sda5 part swap 2,9G c562e4b3-172c-4e23-9e81-dc68cb78bc2b
sdb disk 7,5G STORE N
sdb1 part vfat 7,5G MYLINUXLIVE
9028-FC3E
loop0 loop squashfs 967,5M
loop1 loop ext2 300M ca856bba-2d7d-d14e-9f8d-a5410d27de0a
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda5 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
loop0 1 1 0 /rofs
loop1 1 0 0
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog media0 mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 291M 109M 168M 40% /
udev devtmpfs 487M 12K 487M 1% /dev
tmpfs tmpfs 100M 1.2M 99M 2% /run
/dev/sdb1 vfat 7.5G 1.5G 6.1G 20% /cdrom
/dev/loop0 squashfs 968M 968M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 498M 1.1M 497M 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 498M 76K 498M 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 ext4 227G 193G 23G 90% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00073bc6
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 482256895 241127424 83 Linux
/dev/sda2 482258942 488396799 3068929 5 Extended
/dev/sda5 482258944 488396799 3068928 82 Linux swap / Solaris
Disk /dev/sdb: 8022 MB, 8022654976 bytes
94 heads, 14 sectors/track, 11906 cylinders, total 15669248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 * 32 15669247 7834608 b W95 FAT32
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
C'est parfait, tu peux mettre en œuvre la "Méthode 1 – Réinstaller tout le système sans toucher au « /home »" de la doc Comment réinstaller Ubuntu ?
Tout ce qui est dans ton /home sera conservé par cette Méthode 1, cependant une connerie est toujours possible et c'est pourquoi il est conseillé dans les Pré-requis "Par prudence, avoir sauvegardé votre « /home » sur un support externe"
Ne te laisse pas tenter à l'étape 3 de l'installation et sélectionne bien "Autre chose" comme c'est indiqué dans la procédure.
Dernière modification par malbo (Le 23/02/2015, à 08:50)
Hors ligne
#11 Le 23/02/2015, à 13:19
- SYLLAB
Re : [résolu] HELP ubuntu planté pendant mise à jour
MERCI beaucoup Malbo!
j'ai suivi la procédure que tu m'as indiqué.
Je ne connaissais pas cette documentation (réinstaller ubuntu sans toucher au /home) mercimerci
tout me semble ok maintenant !
Bien à toi
Syllab
Hors ligne