#1 Le 15/02/2015, à 22:46
- fgi
[Résolu]Temps de boot 14.04
Bonjour,
Le temps de boot excessif semble récurrent sur la 14.04 xubuntu. J'ai suivi plusieurs fils de discussion et n'ai pas trouvé la solution à mon problème. En particulier celui-ci : http://forum.ubuntu-fr.org/viewtopic.php?pid=19081701
Pour faire simple :
- Temps entre l'allumage et le menu grup : 24 secondes. Ca me semble supportable, vu le temps pur BIOS.
- Temps entre le OK dans le menu grub, et l'affichage du login : 1:38. Là c'est vraiment trop long.
- Temps entre le OK au login et l'affichage des icones sur le bureau : 27 secondes : Ca aussi c'est très long, surtout que le disque continue à gratter et que j'ai difficilement la main pendant encore une dizaine de secondes.
Mon PC est certes très ancien, mais tout de même, ça n'explique pas tout 
Je suis évidemment preneur de toute suggestion ...
Voici ma config :
C'est une xubuntu.
f@g:~$ uname -r
3.13.0-45-genericJ'avais les pb de délai de boot avant les maj du kernel, dès l'installation depuis la live USB.
dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-7168, BIOS 080012 05/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[ 0.000000] [mem 0x7fe00000-0x7ffcffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff]
[ 0.000000] ACPI: RSDP 00000000000f9070 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffd0000 000038 (v01 A M I OEMRSDT 05000504 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffd0200 000084 (v02 A M I OEMFACP 05000504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffd0430 0037BD (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffde000 000040
[ 0.000000] ACPI: APIC 000000007ffd0390 000054 (v01 A M I OEMAPIC 05000504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffd03f0 00003C (v01 A M I OEMMCFG 05000504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffd3bf0 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 000000007ffde040 000056 (v01 A M I AMI_OEM 05000504 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
[ 0.000000] NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520144 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82368 r8192 d24128 u2097152
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 91c8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028288K/2096568K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 68280K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.664 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.32 BogoMIPS (lpj=8754656)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004077] AppArmor: AppArmor initialized
[ 0.004079] Yama: becoming mindful.
[ 0.008115] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009716] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010482] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010489] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010813] Initializing cgroup subsys memory
[ 0.010825] Initializing cgroup subsys devices
[ 0.010828] Initializing cgroup subsys freezer
[ 0.010830] Initializing cgroup subsys blkio
[ 0.010833] Initializing cgroup subsys perf_event
[ 0.010836] Initializing cgroup subsys hugetlb
[ 0.010860] tseg: 0000000000
[ 0.010868] mce: CPU supports 5 MCE banks
[ 0.010878] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010878] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010878] tlb_flushall_shift: 4
[ 0.019972] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.020958] ACPI: Core revision 20131115
[ 0.022850] ACPI: All ACPI Tables successfully acquired
[ 0.023127] ftrace: allocating 28554 entries in 112 pages
[ 0.036573] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.079041] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 2f, stepping: 00)
[ 0.080000] Performance Events: AMD PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 48
[ 0.080000] ... generic registers: 4
[ 0.080000] ... value mask: 0000ffffffffffff
[ 0.080000] ... max period: 00007fffffffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 000000000000000f
[ 0.080000] x86: Booted up 1 node, 1 CPUs
[ 0.080000] smpboot: Total of 1 processors activated (4377.32 BogoMIPS)
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] devtmpfs: initialized
[ 0.083059] EVM: security.selinux
[ 0.083061] EVM: security.SMACK64
[ 0.083062] EVM: security.ima
[ 0.083064] EVM: security.capability
[ 0.083144] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.084698] pinctrl core: initialized pinctrl subsystem
[ 0.084792] regulator-dummy: no parameters
[ 0.084835] RTC time: 20:26:30, date: 02/15/15
[ 0.084887] NET: Registered protocol family 16
[ 0.085060] cpuidle: using governor ladder
[ 0.085063] cpuidle: using governor menu
[ 0.085069] node 0 link 0: io port [1000, ffffff]
[ 0.085073] TOM: 0000000080000000 aka 2048M
[ 0.085076] node 0 link 0: mmio [e0000000, efffffff]
[ 0.085079] node 0 link 0: mmio [80000000, dfffffff]
[ 0.085081] node 0 link 0: mmio [a0000, bffff]
[ 0.085084] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.085087] bus: [bus 00-ff] on node 0 link 0
[ 0.085089] bus: 00 [io 0x0000-0xffff]
[ 0.085091] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.085092] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.085146] ACPI: bus type PCI registered
[ 0.085148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085226] PCI: not using MMCONFIG
[ 0.085228] PCI: Using configuration type 1 for base access
[ 0.086457] bio: create slab <bio-0> at 0
[ 0.086635] ACPI: Added _OSI(Module Device)
[ 0.086637] ACPI: Added _OSI(Processor Device)
[ 0.086638] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.086640] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088044] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.089624] ACPI: Interpreter enabled
[ 0.089631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.089636] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.089652] ACPI: (supports S0 S3 S4 S5)
[ 0.089653] ACPI: Using IOAPIC for interrupt routing
[ 0.089740] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090939] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.100508] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100659] ACPI: No dock devices found.
[ 0.106785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.106793] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.106800] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.106923] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.106926] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.106929] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.106931] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.106934] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.106937] PCI: root bus 00: hardware-probed resources
[ 0.107153] PCI host bridge to bus 0000:00
[ 0.107157] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.107160] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.107162] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.107165] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.107173] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.107268] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.107305] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.107355] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.107425] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
[ 0.107452] pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.107466] pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
[ 0.107479] pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
[ 0.107492] pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.107505] pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
[ 0.107518] pci 0000:00:11.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[ 0.107532] pci 0000:00:11.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.107586] pci 0000:00:11.0: supports D1 D2
[ 0.107673] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
[ 0.107700] pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
[ 0.107713] pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
[ 0.107726] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.107739] pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
[ 0.107752] pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
[ 0.107765] pci 0000:00:12.0: reg 0x24: [mem 0xfebff800-0xfebff9ff]
[ 0.107779] pci 0000:00:12.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.107832] pci 0000:00:12.0: supports D1 D2
[ 0.107918] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.107942] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.108101] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.108149] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.108173] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.108322] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.108371] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.108398] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.108516] pci 0000:00:13.2: supports D1 D2
[ 0.108518] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.108574] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.108625] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.108647] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.108660] pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
[ 0.108718] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.108832] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.108856] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.108869] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.108882] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.108896] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.108909] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.109048] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.109210] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.109300] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.109344] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.109367] pci 0000:00:14.5: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.109515] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.109557] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.109635] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.109710] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.109787] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.109921] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.109933] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.109944] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.109955] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.109969] pci 0000:01:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 0.110033] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.110041] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.110046] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.110050] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.110098] pci 0000:02:00.0: [163c:3052] type 00 class 0x070300
[ 0.110128] pci 0000:02:00.0: reg 0x10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.110144] pci 0000:02:00.0: reg 0x14: [io 0x8800-0x88ff]
[ 0.110263] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.110330] pci 0000:02:01.0: [1131:7133] type 00 class 0x048000
[ 0.110359] pci 0000:02:01.0: reg 0x10: [mem 0xfe8fe800-0xfe8fefff]
[ 0.110487] pci 0000:02:01.0: supports D1 D2
[ 0.110540] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.110570] pci 0000:02:03.0: reg 0x10: [io 0x8400-0x84ff]
[ 0.110586] pci 0000:02:03.0: reg 0x14: [mem 0xfe8fe400-0xfe8fe4ff]
[ 0.110655] pci 0000:02:03.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.110703] pci 0000:02:03.0: supports D1 D2
[ 0.110705] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.110765] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.110794] pci 0000:02:04.0: reg 0x10: [mem 0xfe8fd800-0xfe8fdfff]
[ 0.110811] pci 0000:02:04.0: reg 0x14: [io 0x8c00-0x8c7f]
[ 0.110931] pci 0000:02:04.0: supports D2
[ 0.110933] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.111030] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.111039] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.111045] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.111051] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.111053] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.111056] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.111678] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111857] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111975] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.112039] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.112100] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.112188] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.112214] Found 1 acpi root devices
[ 0.112358] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.112361] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.112363] vgaarb: loaded
[ 0.112365] vgaarb: bridge control possible 0000:01:00.0
[ 0.112597] SCSI subsystem initialized
[ 0.112670] libata version 3.00 loaded.
[ 0.112699] ACPI: bus type USB registered
[ 0.112722] usbcore: registered new interface driver usbfs
[ 0.112733] usbcore: registered new interface driver hub
[ 0.112763] usbcore: registered new device driver usb
[ 0.112877] PCI: Using ACPI for IRQ routing
[ 0.124900] PCI: pci_cache_line_size set to 64 bytes
[ 0.124973] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.124976] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.125083] NetLabel: Initializing
[ 0.125085] NetLabel: domain hash size = 128
[ 0.125086] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.125102] NetLabel: unlabeled traffic allowed by default
[ 0.125225] Switched to clocksource refined-jiffies
[ 0.133611] AppArmor: AppArmor Filesystem Enabled
[ 0.133654] pnp: PnP ACPI init
[ 0.133673] ACPI: bus type PNP registered
[ 0.133746] pnp 00:00: [dma 4]
[ 0.133779] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.133821] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133850] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.133880] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.134148] pnp 00:04: [dma 0 disabled]
[ 0.134212] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134443] pnp 00:05: [dma 0]
[ 0.134529] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134795] pnp 00:06: [dma 2]
[ 0.134840] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.135118] pnp 00:07: [dma 0 disabled]
[ 0.135225] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.135397] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.135400] system 00:08: [io 0x040b] has been reserved
[ 0.135403] system 00:08: [io 0x04d6] has been reserved
[ 0.135405] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.135408] system 00:08: [io 0x0c14] has been reserved
[ 0.135411] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.135413] system 00:08: [io 0x0c52] has been reserved
[ 0.135416] system 00:08: [io 0x0c6c] has been reserved
[ 0.135419] system 00:08: [io 0x0c6f] has been reserved
[ 0.135421] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.135424] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.135427] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.135430] system 00:08: [io 0x0800-0x089f] could not be reserved
[ 0.135433] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.135435] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.135439] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.135443] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135503] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.135618] system 00:0a: [io 0x0e00-0x0e7f] has been reserved
[ 0.135621] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135700] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.135703] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.135706] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135770] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.135773] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135928] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135931] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.135934] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.135937] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.135940] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.136076] pnp: PnP ACPI: found 14 devices
[ 0.136077] ACPI: bus type PNP unregistered
[ 0.142242] Switched to clocksource acpi_pm
[ 0.142278] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 0.142287] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.142291] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.142294] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.142299] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.142303] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.142310] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.142322] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.142324] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.142327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.142329] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
[ 0.142332] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.142335] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.142337] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.142339] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.142342] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.142344] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.142394] NET: Registered protocol family 2
[ 0.142668] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.142775] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.142913] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.142993] TCP: reno registered
[ 0.143001] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.143033] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.143152] NET: Registered protocol family 1
[ 0.143168] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.296168] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.296185] PCI: CLS 64 bytes, default 64
[ 0.296269] Trying to unpack rootfs image as initramfs...
[ 0.715206] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000)
[ 0.715631] microcode: AMD CPU family 0xf not supported
[ 0.715634] Scanning for low memory corruption every 60 seconds
[ 0.715905] Initialise system trusted keyring
[ 0.715970] audit: initializing netlink socket (disabled)
[ 0.715988] type=2000 audit(1424031990.711:1): initialized
[ 0.748139] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.749541] zbud: loaded
[ 0.749715] VFS: Disk quotas dquot_6.5.2
[ 0.749774] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.750360] fuse init (API version 7.22)
[ 0.750447] msgmni has been set to 3998
[ 0.750518] Key type big_key registered
[ 0.750851] Key type asymmetric registered
[ 0.750853] Asymmetric key parser 'x509' registered
[ 0.750895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.750930] io scheduler noop registered
[ 0.750932] io scheduler deadline registered (default)
[ 0.750964] io scheduler cfq registered
[ 0.751108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.751125] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.751172] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.751174] vesafb: scrolling: redraw
[ 0.751177] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.751378] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.809155] Console: switching to colour frame buffer device 160x64
[ 0.866880] fb0: VESA VGA frame buffer device
[ 0.866923] ipmi message handler version 39.2
[ 0.867001] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.867006] ACPI: Power Button [PWRB]
[ 0.867053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.867056] ACPI: Power Button [PWRF]
[ 0.867089] ACPI: duty_cycle spans bit 4
[ 0.867182] GHES: HEST is not enabled!
[ 0.867274] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.887923] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.908593] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.910090] 0000:02:00.0: ttyS5 at I/O 0x8808 (irq = 20, base_baud = 115200) is a 16450
[ 0.910210] 0000:02:00.0: ttyS6 at I/O 0x8810 (irq = 20, base_baud = 115200) is a 8250
[ 0.910319] 0000:02:00.0: ttyS7 at I/O 0x8818 (irq = 20, base_baud = 115200) is a 16450
[ 0.910427] 0000:02:00.0: ttyS8 at I/O 0x8820 (irq = 20, base_baud = 115200) is a 8250
[ 0.910535] 0000:02:00.0: ttyS9 at I/O 0x8828 (irq = 20, base_baud = 115200) is a 8250
[ 0.912599] Linux agpgart interface v0.103
[ 0.912730] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.912759] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.912762] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.912787] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.912789] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.914314] brd: module loaded
[ 0.915125] loop: module loaded
[ 0.915635] libphy: Fixed MDIO Bus: probed
[ 0.915748] tun: Universal TUN/TAP device driver, 1.6
[ 0.915750] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.915800] PPP generic driver version 2.4.2
[ 0.915852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.915857] ehci-pci: EHCI PCI platform driver
[ 0.915979] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.915987] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.916090] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 0.928021] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.928115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.928118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.928120] usb usb1: Product: EHCI Host Controller
[ 0.928123] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 0.928125] usb usb1: SerialNumber: 0000:00:13.2
[ 0.928244] hub 1-0:1.0: USB hub found
[ 0.928254] hub 1-0:1.0: 8 ports detected
[ 0.928470] ehci-platform: EHCI generic platform driver
[ 0.928485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928487] ohci-pci: OHCI PCI platform driver
[ 0.928567] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.928573] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.928592] ohci-pci 0000:00:13.0: irq 19, io mem 0xfebfe000
[ 0.988064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.988067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.988069] usb usb2: Product: OHCI PCI host controller
[ 0.988072] usb usb2: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 0.988074] usb usb2: SerialNumber: 0000:00:13.0
[ 0.988172] hub 2-0:1.0: USB hub found
[ 0.988184] hub 2-0:1.0: 4 ports detected
[ 0.988340] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.988347] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.988364] ohci-pci 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 1.048064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.048066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.048069] usb usb3: Product: OHCI PCI host controller
[ 1.048071] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 1.048073] usb usb3: SerialNumber: 0000:00:13.1
[ 1.048167] hub 3-0:1.0: USB hub found
[ 1.048180] hub 3-0:1.0: 4 ports detected
[ 1.048286] ohci-platform: OHCI generic platform driver
[ 1.048296] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.048373] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.048375] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.049001] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.049104] mousedev: PS/2 mouse device common for all mice
[ 1.049233] rtc_cmos 00:01: RTC can wake from S4
[ 1.049381] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.049410] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.049495] device-mapper: uevent: version 1.0.3
[ 1.049571] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.049578] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.049701] TCP: cubic registered
[ 1.049810] NET: Registered protocol family 10
[ 1.050034] NET: Registered protocol family 17
[ 1.050049] Key type dns_resolver registered
[ 1.050267] Loading compiled-in X.509 certificates
[ 1.051511] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.051528] registered taskstats version 1
[ 1.054394] Key type trusted registered
[ 1.056968] Key type encrypted registered
[ 1.059496] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.059502] IMA: No TPM chip found, activating TPM-bypass!
[ 1.059791] regulator-dummy: disabling
[ 1.059841] Magic number: 3:598:447
[ 1.059951] rtc_cmos 00:01: setting system clock to 2015-02-15 20:26:31 UTC (1424031991)
[ 1.060119] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 1.060122] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.060123] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.060125] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.060151] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 1.060158] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.060159] EDD information not available.
[ 1.060190] PM: Hibernation image not present or could not be loaded.
[ 1.062463] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.062468] Write protecting the kernel read-only data: 12288k
[ 1.065779] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.068738] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.076950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.088383] systemd-udevd[90]: starting version 204
[ 1.115970] sata_sil 0000:00:11.0: version 2.4
[ 1.132133] scsi0 : sata_sil
[ 1.136970] scsi1 : sata_sil
[ 1.137037] ata1: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffc80 irq 23
[ 1.137041] ata2: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffcc0 irq 23
[ 1.141167] scsi2 : sata_sil
[ 1.143392] scsi3 : sata_sil
[ 1.143466] ata3: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff880 irq 22
[ 1.143471] ata4: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff8c0 irq 22
[ 1.146849] scsi4 : pata_atiixp
[ 1.149644] scsi5 : pata_atiixp
[ 1.149713] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.149716] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.158016] FDC 0 is a post-1991 82077
[ 1.167957] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.167986] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.171578] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.182122] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0000000000018400, 00:11:09:19:9c:15, IRQ 20
[ 1.248074] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.324584] ata6.00: ATAPI: LITE-ON DVDRW SOHW-1633S, B9S5, max UDMA/66
[ 1.340515] ata6.00: configured for UDMA/66
[ 1.456062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.460038] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.464496] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 1.464499] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.480497] ata1.00: configured for UDMA/100
[ 1.480626] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 1.481591] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.481662] sd 0:0:0:0: [sda] Write Protect is off
[ 1.481665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.481695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.481868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.513919] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.516129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.712029] tsc: Refined TSC clocksource calibration: 2188.787 MHz
[ 1.748138] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000096798a, S400
[ 1.800048] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.876035] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 2.086071] usb 3-2: New USB device found, idVendor=047d, idProduct=1020
[ 2.086076] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.086078] usb 3-2: Product: Kensington Expert Mouse
[ 2.086081] usb 3-2: Manufacturer: Kensington
[ 2.092636] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.099887] usbcore: registered new interface driver usbhid
[ 2.099893] usbhid: USB HID core driver
[ 2.104061] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[ 2.105871] hid-generic 0003:047D:1020.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:13.1-2/input0
[ 2.120058] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.120977] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S B9S5 PQ: 0 ANSI: 5
[ 2.123171] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.123174] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.123290] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.123439] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.264038] usb 2-4: new full-speed USB device number 2 using ohci-pci
[ 2.473069] usb 2-4: New USB device found, idVendor=058f, idProduct=9360
[ 2.473075] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.473077] usb 2-4: Product: USB Reader
[ 2.473080] usb 2-4: Manufacturer:
[ 2.473082] usb 2-4: SerialNumber: 2004888
[ 2.479263] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 2.479444] scsi6 : usb-storage 2-4:1.0
[ 2.479742] usbcore: registered new interface driver usb-storage
[ 2.491550] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.712091] Switched to clocksource tsc
[ 3.137545] random: nonblocking pool is initialized
[ 3.483082] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.489071] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.495069] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.501069] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.501308] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.501437] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 3.501561] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 3.501682] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 3.591067] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.601064] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.611064] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.621063] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 69.662135] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 69.730855] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 70.004977] systemd-udevd[287]: starting version 204
[ 70.172759] lp: driver loaded but no devices found
[ 70.194139] ppdev: user-space parallel port driver
[ 70.199869] parport_pc 00:07: reported by Plug and Play ACPI
[ 70.199909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 70.247213] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 70.296224] lp0: using parport0 (interrupt-driven).
[ 70.431322] [drm] Initialized drm 1.1.0 20060810
[ 70.434725] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 70.493152] Linux video capture interface: v2.00
[ 70.541570] wmi: Mapper loaded
[ 70.577505] MCE: In-kernel MCE decoding enabled.
[ 70.596497] EDAC MC: Ver: 3.0.0
[ 70.609556] AMD64 EDAC driver v3.4.0
[ 70.609594] EDAC amd64: DRAM ECC enabled.
[ 70.609599] EDAC amd64: K8 revE or earlier detected (node 0).
[ 70.609640] EDAC amd64: CS0: Double data rate SDRAM
[ 70.609641] EDAC amd64: CS2: Double data rate SDRAM
[ 70.609643] EDAC amd64: CS3: Double data rate SDRAM
[ 70.611279] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 70.611340] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 70.630710] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 70.630841] saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 9, latency: 64, mmio: 0xfe8fe800
[ 70.630849] saa7133[0]: subsystem: 1043:4857, board: Asus Tiger Rev:1.00 [card=152,autodetected]
[ 70.630866] saa7133[0]: board init: gpio is 0
[ 70.631055] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 70.631058] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 70.631086] Console: switching to colour dummy device 80x25
[ 70.631544] [drm] hdmi device not found 1 0 1
[ 70.631612] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x044200a2
[ 70.631615] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44 (NV44)
[ 70.631617] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 70.635715] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 70.725769] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 70.725772] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 70.725961] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 70.725965] nouveau [ VBIOS][0000:01:00.0] version 05.44.02.24.00
[ 70.772650] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 70.772655] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 70.772657] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 70.875681] saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 70.875692] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 70.875698] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
[ 70.875705] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875711] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[ 70.875718] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875724] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875730] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875737] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875743] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875749] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875755] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875762] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875768] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875774] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.875781] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 70.973455] tuner 1-004b: Tuner -1 found with type(s) Radio TV.
[ 71.068976] tda829x 1-004b: setting tuner address to 61
[ 71.141454] type=1400 audit(1424032061.579:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=367 comm="apparmor_parser"
[ 71.141464] type=1400 audit(1424032061.579:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
[ 71.141469] type=1400 audit(1424032061.579:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
[ 71.142088] type=1400 audit(1424032061.579:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
[ 71.142094] type=1400 audit(1424032061.579:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
[ 71.142417] type=1400 audit(1424032061.579:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
[ 71.169768] tda829x 1-004b: type set to tda8290+75a
[ 71.240883] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 71.250302] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 71.809916] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 71.809930] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 71.809934] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 71.861742] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 500 MHz
[ 71.861757] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz
[ 71.868250] [TTM] Zone kernel: Available graphics memory: 1024950 kiB
[ 71.868254] [TTM] Initializing pool allocator
[ 71.868260] [TTM] Initializing DMA pool allocator
[ 71.868282] nouveau [ DRM] VRAM: 60 MiB
[ 71.868284] nouveau [ DRM] GART: 512 MiB
[ 71.868290] nouveau [ DRM] TMDS table version 1.1
[ 71.868292] nouveau [ DRM] DCB version 3.0
[ 71.868295] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 71.868298] nouveau [ DRM] DCB outp 01: 01011312 00000020
[ 71.868301] nouveau [ DRM] DCB outp 02: 020223f1 0000c033
[ 71.868303] nouveau [ DRM] DCB conn 00: 0000
[ 71.868305] nouveau [ DRM] DCB conn 01: 2130
[ 71.868307] nouveau [ DRM] DCB conn 02: 0210
[ 71.868309] nouveau [ DRM] DCB conn 03: 0211
[ 71.868311] nouveau [ DRM] DCB conn 04: 0213
[ 71.874539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 71.874544] [drm] No driver support for vblank timestamp query.
[ 71.874597] nouveau [ DRM] 0xD1F3: Parsing digital output script table
[ 71.953522] nouveau [ DRM] MM: using M2MF for buffer copies
[ 71.953534] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
[ 72.208238] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff88007ad62000
[ 72.208395] fbcon: nouveaufb (fb0) is primary device
[ 72.248976] Console: switching to colour frame buffer device 160x64
[ 72.251283] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 72.251285] nouveau 0000:01:00.0: registered panic notifier
[ 72.251292] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 74.650362] type=1400 audit(1424032065.087:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=581 comm="apparmor_parser"
[ 74.650374] type=1400 audit(1424032065.087:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=581 comm="apparmor_parser"
[ 74.650980] type=1400 audit(1424032065.087:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=581 comm="apparmor_parser"
[ 75.142038] init: failsafe main process (577) killed by TERM signal
[ 75.340912] saa7133[0]: registered device video0 [v4l2]
[ 75.341774] saa7133[0]: registered device vbi0
[ 75.342169] saa7133[0]: registered device radio0
[ 75.362730] Bluetooth: Core ver 2.17
[ 75.362900] NET: Registered protocol family 31
[ 75.362902] Bluetooth: HCI device and connection manager initialized
[ 75.362912] Bluetooth: HCI socket layer initialized
[ 75.362915] Bluetooth: L2CAP socket layer initialized
[ 75.362920] Bluetooth: SCO socket layer initialized
[ 75.389888] saa7134 ALSA driver for DMA sound loaded
[ 75.389932] saa7133[0]/alsa: saa7133[0] at 0xfe8fe800 irq 9 registered as card -2
[ 75.406699] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 75.406704] Bluetooth: BNEP filters: protocol multicast
[ 75.406716] Bluetooth: BNEP socket layer initialized
[ 75.432074] Bluetooth: RFCOMM TTY layer initialized
[ 75.432091] Bluetooth: RFCOMM socket layer initialized
[ 75.432102] Bluetooth: RFCOMM ver 1.11
[ 75.434460] dvb_init() allocating 1 frontend
[ 75.488057] DVB: registering new adapter (saa7133[0])
[ 75.488069] saa7134 0000:02:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 75.724031] tda1004x: setting up plls for 48MHz sampling clock
[ 75.996310] init: cups main process (592) killed by HUP signal
[ 75.996325] init: cups main process ended, respawning
[ 77.145206] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 77.156009] serial8250: too much work for irq20
[ 77.212011] serial8250: too much work for irq20
[ 77.248002] serial8250: too much work for irq20
[ 77.320001] serial8250: too much work for irq20
[ 77.339044] serial8250: too much work for irq20
[ 77.504318] serial8250: too much work for irq20
[ 77.536007] serial8250: too much work for irq20
[ 77.580010] serial8250: too much work for irq20
[ 77.684000] serial8250: too much work for irq20
[ 77.716002] serial8250: too much work for irq20
[ 77.784278] tda1004x: found firmware revision 29 -- ok
[ 77.961981] type=1400 audit(1424032068.399:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=832 comm="apparmor_parser"
[ 77.961993] type=1400 audit(1424032068.399:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
[ 77.962376] type=1400 audit(1424032068.399:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
[ 77.970897] type=1400 audit(1424032068.407:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=841 comm="apparmor_parser"
[ 77.970910] type=1400 audit(1424032068.407:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
[ 77.970916] type=1400 audit(1424032068.407:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[ 77.978292] type=1400 audit(1424032068.415:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
[ 77.978305] type=1400 audit(1424032068.415:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[ 77.978647] type=1400 audit(1424032068.415:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[ 78.011913] type=1400 audit(1424032068.447:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=847 comm="apparmor_parser"
[ 82.550430] serial8250_interrupt: 41 callbacks suppressed
[ 82.550430] serial8250: too much work for irq20
[ 82.580320] serial8250: too much work for irq20
[ 82.750431] serial8250: too much work for irq20
[ 82.794627] serial8250: too much work for irq20
[ 82.812005] serial8250: too much work for irq20
[ 82.900038] serial8250: too much work for irq20
[ 84.550408] serial8250: too much work for irq20
[ 84.578514] serial8250: too much work for irq20
[ 84.750436] serial8250: too much work for irq20
[ 84.800034] serial8250: too much work for irq20
[ 91.648292] init: plymouth-upstart-bridge main process (161) killed by TERM signal
[ 104.838722] audit_printk_skb: 78 callbacks suppressed
[ 104.838728] type=1400 audit(1424032095.275:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2769 comm="apparmor_parser"
[ 104.838738] type=1400 audit(1424032095.275:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2769 comm="apparmor_parser"
[ 104.839352] type=1400 audit(1424032095.275:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2769 comm="apparmor_parser"
[ 156.132118] tsc: Marking TSC unstable due to cpufreq changes
[ 156.132186] Switched to clocksource acpi_pmJ'ai en particulier regardé ce qui se disait sur le net à propos de la séquence
[ 2.712091] Switched to clocksource tsc
[ 3.137545] random: nonblocking pool is initializedmais je sèche...
/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash tpm_tis.force=1"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
export GRUB_MENU_PICTURE="/boot/grub/splash/1280-EyesOnLinux.jpg"N'hésitez pas à me demander toute autre log si nécessaire.
Merci d'avance !
Dernière modification par fgi (Le 28/02/2015, à 19:30)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#2 Le 16/02/2015, à 21:23
- moko138
Re : [Résolu]Temps de boot 14.04
Il te faut sortir le tournevis.
Là :
[ 3.621063] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 69.662135] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FSil y a déjà un trou de 66 secondes !
1) Débranche déjà le lecteur de cartes de ta tour (un ou deux câbles, selon les modèles).
Ensuite tu peux refermer ta tour.
2) 24 secondes jusqu'au grub : c'est aussi excessif.
Même remède que précédemment.
3) Donne aussi les 6 retours complets et séparés de :
sudo lshwlspci |grep -i vgasudo parted -lcat /etc/fstabsudo blkidsudo apt-get install smartmontools & sudo smartctl -a /dev/sdaDernière modification par moko138 (Le 16/02/2015, à 23:33)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 18/02/2015, à 07:54
- moko138
Re : [Résolu]Temps de boot 14.04
Allô ?
j'ai dit "tournevis", je n'ai pas dit d'affronter un dragon. 
Explication :
Le lecteur de cartes de ta tour est probablement dans cet état :
Ces amas de poussières font court-circuit.
Donc quand le bios fait le tour du propriétaire, il constate des anomalies et se consulte avant de passer la main au disque dur.
D'où les 24 secondes avant l'apparition de grub.
Quand l'OS reçoit la main, il refait le tour du propriétaire, constate à son tour des anomalies dans le lecteur de cartes, au bout de 3,5 secondes :
[ 3.483082] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.489071] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.495069] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.501069] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
(...)
[ 3.591067] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.601064] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.611064] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.621063] sd 6:0:0:3: [sde] Attached SCSI removable disket patiente 66 secondes.
C'est donc ton premier problème à éliminer, en débranchant le ou les câbles reliant la carte-mère au lecteur : 
Ensuite viendront les 14 (= 91-77) secondes perdues parce que les ports séries/"serial" ne sont pas encore désactivés dans le bios :
[ 77.156009] serial8250: too much work for irq20
(...)
[ 84.800034] serial8250: too much work for irq20
[ 91.Enfin les problèmes graphiques :
[ 70.431322] [drm] Initialized drm 1.1.0 20060810
[ 70.631058] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 72.251285] nouveau 0000:01:00.0: registered panic notifier
[ 72.251292] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0mais là, il semble que moins de 2 secondes soient perdues.
Dernière modification par moko138 (Le 18/02/2015, à 10:05)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 18/02/2015, à 22:33
- fgi
Re : [Résolu]Temps de boot 14.04
Bonsoir moko138,
Merci pour tes réponses et le mal que tu t'es donné pour être didactique
J'ai été un peu silencieux parce que j'étais en déplacement pro ces derniers jours. J'ai bien envoyé un SMS à mon dragon pour qu'il prenne le tournevis, mais c'est un gros maladroit ...
J'ai donc fait les actions suivantes :
- Démonter le lecteur cartes SD (1 cable)
- Passer un coup d'aspirateur dans la tour (en faisant gaffe à l'électricité statique 
)
- Aller dans le BIOS pour disabler les ports Série, Parallèle et le floppy
- 1 reboot pour le fun,
- 1 reboot sérieux avec chrono
Ca donne ça :
- Temps entre l'allumage et le menu grup : 25 secondes.
- Temps entre le OK dans le menu grub, et l'affichage du login : 3:07
- Temps entre le OK au login et l'affichage des icones sur le bureau : 51 seccondes
Voici les logs, toujours aussi obscures pour moi :
dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-7168, BIOS 080012 05/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[ 0.000000] [mem 0x7fe00000-0x7ffcffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff]
[ 0.000000] ACPI: RSDP 00000000000f9070 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffd0000 000038 (v01 A M I OEMRSDT 05000504 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffd0200 000084 (v02 A M I OEMFACP 05000504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffd0430 0037BD (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffde000 000040
[ 0.000000] ACPI: APIC 000000007ffd0390 000054 (v01 A M I OEMAPIC 05000504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffd03f0 00003C (v01 A M I OEMMCFG 05000504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffd3bf0 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 000000007ffde040 000056 (v01 A M I AMI_OEM 05000504 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
[ 0.000000] NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520144 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82368 r8192 d24128 u2097152
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 91c8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028288K/2096568K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 68280K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.745 MHz processor
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.49 BogoMIPS (lpj=8754980)
[ 0.008008] pid_max: default: 32768 minimum: 301
[ 0.008052] Security Framework initialized
[ 0.008077] AppArmor: AppArmor initialized
[ 0.008079] Yama: becoming mindful.
[ 0.008380] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013299] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.014069] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.014075] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.014400] Initializing cgroup subsys memory
[ 0.014411] Initializing cgroup subsys devices
[ 0.014414] Initializing cgroup subsys freezer
[ 0.014417] Initializing cgroup subsys blkio
[ 0.014419] Initializing cgroup subsys perf_event
[ 0.014422] Initializing cgroup subsys hugetlb
[ 0.014447] tseg: 0000000000
[ 0.014455] mce: CPU supports 5 MCE banks
[ 0.014465] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.014465] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.014465] tlb_flushall_shift: 4
[ 0.023509] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.024496] ACPI: Core revision 20131115
[ 0.026386] ACPI: All ACPI Tables successfully acquired
[ 0.026662] ftrace: allocating 28554 entries in 112 pages
[ 0.036572] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.078557] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 2f, stepping: 00)
[ 0.080000] Performance Events: AMD PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 48
[ 0.080000] ... generic registers: 4
[ 0.080000] ... value mask: 0000ffffffffffff
[ 0.080000] ... max period: 00007fffffffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 000000000000000f
[ 0.080000] x86: Booted up 1 node, 1 CPUs
[ 0.080000] smpboot: Total of 1 processors activated (4377.49 BogoMIPS)
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] devtmpfs: initialized
[ 0.083060] EVM: security.selinux
[ 0.083062] EVM: security.SMACK64
[ 0.083063] EVM: security.ima
[ 0.083065] EVM: security.capability
[ 0.083145] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.084699] pinctrl core: initialized pinctrl subsystem
[ 0.084794] regulator-dummy: no parameters
[ 0.084836] RTC time: 20:11:40, date: 02/18/15
[ 0.084888] NET: Registered protocol family 16
[ 0.085061] cpuidle: using governor ladder
[ 0.085063] cpuidle: using governor menu
[ 0.085070] node 0 link 0: io port [1000, ffffff]
[ 0.085073] TOM: 0000000080000000 aka 2048M
[ 0.085076] node 0 link 0: mmio [e0000000, efffffff]
[ 0.085080] node 0 link 0: mmio [80000000, dfffffff]
[ 0.085082] node 0 link 0: mmio [a0000, bffff]
[ 0.085084] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.085088] bus: [bus 00-ff] on node 0 link 0
[ 0.085090] bus: 00 [io 0x0000-0xffff]
[ 0.085091] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.085093] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.085146] ACPI: bus type PCI registered
[ 0.085149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085227] PCI: not using MMCONFIG
[ 0.085229] PCI: Using configuration type 1 for base access
[ 0.086459] bio: create slab <bio-0> at 0
[ 0.086636] ACPI: Added _OSI(Module Device)
[ 0.086638] ACPI: Added _OSI(Processor Device)
[ 0.086640] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.086641] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088045] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.089625] ACPI: Interpreter enabled
[ 0.089632] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.089637] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.089653] ACPI: (supports S0 S3 S4 S5)
[ 0.089655] ACPI: Using IOAPIC for interrupt routing
[ 0.089741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090940] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.100300] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100451] ACPI: No dock devices found.
[ 0.106059] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.106067] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.106074] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.106196] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.106199] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.106202] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.106204] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.106207] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.106210] PCI: root bus 00: hardware-probed resources
[ 0.106427] PCI host bridge to bus 0000:00
[ 0.106430] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.106433] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.106436] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.106438] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.106447] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.106542] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.106578] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.106629] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.106699] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
[ 0.106726] pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.106739] pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
[ 0.106752] pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
[ 0.106766] pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.106779] pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
[ 0.106792] pci 0000:00:11.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[ 0.106806] pci 0000:00:11.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.106859] pci 0000:00:11.0: supports D1 D2
[ 0.106947] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
[ 0.106974] pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
[ 0.106987] pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
[ 0.107000] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.107013] pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
[ 0.107026] pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
[ 0.107040] pci 0000:00:12.0: reg 0x24: [mem 0xfebff800-0xfebff9ff]
[ 0.107053] pci 0000:00:12.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.107107] pci 0000:00:12.0: supports D1 D2
[ 0.107191] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.107215] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.107365] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.107411] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.107435] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.107585] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.107634] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.107660] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.107778] pci 0000:00:13.2: supports D1 D2
[ 0.107781] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.107836] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.107886] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.107908] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.107921] pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
[ 0.107980] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.108104] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.108127] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.108141] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.108154] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.108167] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.108180] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.108318] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.108481] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.108571] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.108614] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.108637] pci 0000:00:14.5: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.108785] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.108827] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.108905] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.108980] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.109053] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.109184] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.109195] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.109207] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.109218] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.109231] pci 0000:01:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 0.109299] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.109306] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.109312] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.109315] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.109360] pci 0000:02:00.0: [163c:3052] type 00 class 0x070300
[ 0.109390] pci 0000:02:00.0: reg 0x10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.109406] pci 0000:02:00.0: reg 0x14: [io 0x8800-0x88ff]
[ 0.109525] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.109592] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.109620] pci 0000:02:03.0: reg 0x10: [io 0x8400-0x84ff]
[ 0.109636] pci 0000:02:03.0: reg 0x14: [mem 0xfe8fe400-0xfe8fe4ff]
[ 0.109706] pci 0000:02:03.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.109753] pci 0000:02:03.0: supports D1 D2
[ 0.109756] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.109826] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.109856] pci 0000:02:04.0: reg 0x10: [mem 0xfe8fd800-0xfe8fdfff]
[ 0.109872] pci 0000:02:04.0: reg 0x14: [io 0x8c00-0x8c7f]
[ 0.109991] pci 0000:02:04.0: supports D2
[ 0.109994] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.110093] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.110102] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.110107] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.110113] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.110116] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.110119] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.110768] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.110829] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.110888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.110947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111064] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.111119] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.111261] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.111286] Found 1 acpi root devices
[ 0.111434] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.111437] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.111439] vgaarb: loaded
[ 0.111440] vgaarb: bridge control possible 0000:01:00.0
[ 0.111674] SCSI subsystem initialized
[ 0.111749] libata version 3.00 loaded.
[ 0.111774] ACPI: bus type USB registered
[ 0.111798] usbcore: registered new interface driver usbfs
[ 0.111811] usbcore: registered new interface driver hub
[ 0.111838] usbcore: registered new device driver usb
[ 0.111957] PCI: Using ACPI for IRQ routing
[ 0.123981] PCI: pci_cache_line_size set to 64 bytes
[ 0.124050] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.124053] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.124161] NetLabel: Initializing
[ 0.124163] NetLabel: domain hash size = 128
[ 0.124164] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.124180] NetLabel: unlabeled traffic allowed by default
[ 0.124299] Switched to clocksource refined-jiffies
[ 0.132697] AppArmor: AppArmor Filesystem Enabled
[ 0.132738] pnp: PnP ACPI init
[ 0.132756] ACPI: bus type PNP registered
[ 0.132831] pnp 00:00: [dma 4]
[ 0.132863] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.132909] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132935] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.132967] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.133536] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.133540] system 00:04: [io 0x040b] has been reserved
[ 0.133542] system 00:04: [io 0x04d6] has been reserved
[ 0.133545] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.133548] system 00:04: [io 0x0c14] has been reserved
[ 0.133551] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.133553] system 00:04: [io 0x0c52] has been reserved
[ 0.133556] system 00:04: [io 0x0c6c] has been reserved
[ 0.133559] system 00:04: [io 0x0c6f] has been reserved
[ 0.133561] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.133564] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.133567] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.133570] system 00:04: [io 0x0800-0x089f] could not be reserved
[ 0.133573] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.133576] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.133579] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.133583] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133643] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.133756] system 00:06: [io 0x0e00-0x0e7f] has been reserved
[ 0.133759] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133834] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.133837] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.133840] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133903] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.133906] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134064] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134068] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.134071] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.134074] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.134077] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134197] pnp: PnP ACPI: found 10 devices
[ 0.134198] ACPI: bus type PNP unregistered
[ 0.140354] Switched to clocksource acpi_pm
[ 0.140390] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 0.140399] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.140403] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.140406] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.140411] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.140415] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.140422] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.140434] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.140436] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.140439] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.140441] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
[ 0.140444] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.140447] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.140449] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.140451] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.140454] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.140456] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.140503] NET: Registered protocol family 2
[ 0.140779] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.140888] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.141025] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.141103] TCP: reno registered
[ 0.141108] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141143] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141260] NET: Registered protocol family 1
[ 0.141275] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.296169] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.296183] PCI: CLS 64 bytes, default 64
[ 0.296266] Trying to unpack rootfs image as initramfs...
[ 0.715220] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000)
[ 0.715650] microcode: AMD CPU family 0xf not supported
[ 0.715652] Scanning for low memory corruption every 60 seconds
[ 0.715922] Initialise system trusted keyring
[ 0.715987] audit: initializing netlink socket (disabled)
[ 0.716021] type=2000 audit(1424290300.711:1): initialized
[ 0.748154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.749551] zbud: loaded
[ 0.749727] VFS: Disk quotas dquot_6.5.2
[ 0.749785] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.750383] fuse init (API version 7.22)
[ 0.750470] msgmni has been set to 3998
[ 0.750538] Key type big_key registered
[ 0.750871] Key type asymmetric registered
[ 0.750873] Asymmetric key parser 'x509' registered
[ 0.750915] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.750949] io scheduler noop registered
[ 0.750951] io scheduler deadline registered (default)
[ 0.750983] io scheduler cfq registered
[ 0.751123] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.751140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.751188] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.751189] vesafb: scrolling: redraw
[ 0.751192] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.751393] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.809401] Console: switching to colour frame buffer device 160x64
[ 0.867346] fb0: VESA VGA frame buffer device
[ 0.867390] ipmi message handler version 39.2
[ 0.867468] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.867474] ACPI: Power Button [PWRB]
[ 0.867516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.867519] ACPI: Power Button [PWRF]
[ 0.867553] ACPI: duty_cycle spans bit 4
[ 0.867642] GHES: HEST is not enabled!
[ 0.867731] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.869352] 0000:02:00.0: ttyS5 at I/O 0x8808 (irq = 20, base_baud = 115200) is a 16450
[ 0.869471] 0000:02:00.0: ttyS6 at I/O 0x8810 (irq = 20, base_baud = 115200) is a 8250
[ 0.869579] 0000:02:00.0: ttyS7 at I/O 0x8818 (irq = 20, base_baud = 115200) is a 16450
[ 0.869693] 0000:02:00.0: ttyS8 at I/O 0x8820 (irq = 20, base_baud = 115200) is a 8250
[ 0.869802] 0000:02:00.0: ttyS9 at I/O 0x8828 (irq = 20, base_baud = 115200) is a 8250
[ 0.871876] Linux agpgart interface v0.103
[ 0.872029] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.872058] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.872061] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.872085] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.872087] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.873648] brd: module loaded
[ 0.874472] loop: module loaded
[ 0.874983] libphy: Fixed MDIO Bus: probed
[ 0.875096] tun: Universal TUN/TAP device driver, 1.6
[ 0.875098] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.875148] PPP generic driver version 2.4.2
[ 0.875197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.875202] ehci-pci: EHCI PCI platform driver
[ 0.875321] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.875329] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.875407] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 0.884022] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.884115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.884118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.884121] usb usb1: Product: EHCI Host Controller
[ 0.884123] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 0.884125] usb usb1: SerialNumber: 0000:00:13.2
[ 0.884249] hub 1-0:1.0: USB hub found
[ 0.884259] hub 1-0:1.0: 8 ports detected
[ 0.884466] ehci-platform: EHCI generic platform driver
[ 0.884479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.884481] ohci-pci: OHCI PCI platform driver
[ 0.884560] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.884567] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.884586] ohci-pci 0000:00:13.0: irq 19, io mem 0xfebfe000
[ 0.944066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.944069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.944071] usb usb2: Product: OHCI PCI host controller
[ 0.944074] usb usb2: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 0.944076] usb usb2: SerialNumber: 0000:00:13.0
[ 0.944177] hub 2-0:1.0: USB hub found
[ 0.944189] hub 2-0:1.0: 4 ports detected
[ 0.944358] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.944365] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.944382] ohci-pci 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 1.004068] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.004071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.004073] usb usb3: Product: OHCI PCI host controller
[ 1.004075] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 1.004077] usb usb3: SerialNumber: 0000:00:13.1
[ 1.004171] hub 3-0:1.0: USB hub found
[ 1.004183] hub 3-0:1.0: 4 ports detected
[ 1.004288] ohci-platform: OHCI generic platform driver
[ 1.004299] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004374] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.004375] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.005162] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.005263] mousedev: PS/2 mouse device common for all mice
[ 1.005387] rtc_cmos 00:01: RTC can wake from S4
[ 1.005534] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.005563] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.005647] device-mapper: uevent: version 1.0.3
[ 1.005716] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.005723] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.005854] TCP: cubic registered
[ 1.005962] NET: Registered protocol family 10
[ 1.006189] NET: Registered protocol family 17
[ 1.006201] Key type dns_resolver registered
[ 1.006410] Loading compiled-in X.509 certificates
[ 1.007656] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.007673] registered taskstats version 1
[ 1.010518] Key type trusted registered
[ 1.013078] Key type encrypted registered
[ 1.015564] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.015570] IMA: No TPM chip found, activating TPM-bypass!
[ 1.015840] regulator-dummy: disabling
[ 1.015888] Magic number: 3:67:195
[ 1.015999] rtc_cmos 00:01: setting system clock to 2015-02-18 20:11:41 UTC (1424290301)
[ 1.016222] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 1.016225] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.016226] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.016228] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.016270] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 1.016277] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.016278] EDD information not available.
[ 1.016307] PM: Hibernation image not present or could not be loaded.
[ 1.018560] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.018565] Write protecting the kernel read-only data: 12288k
[ 1.021886] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.024851] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.033012] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.044372] systemd-udevd[90]: starting version 204
[ 1.074719] sata_sil 0000:00:11.0: version 2.4
[ 1.089102] scsi0 : sata_sil
[ 1.092212] scsi1 : sata_sil
[ 1.092282] ata1: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffc80 irq 23
[ 1.092286] ata2: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffcc0 irq 23
[ 1.094896] scsi2 : sata_sil
[ 1.098113] scsi3 : sata_sil
[ 1.098187] ata3: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff880 irq 22
[ 1.098191] ata4: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff8c0 irq 22
[ 1.101496] scsi4 : pata_atiixp
[ 1.103916] scsi5 : pata_atiixp
[ 1.103976] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.103979] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.119381] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.119411] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.126661] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.127919] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0000000000018400, 00:11:09:19:9c:15, IRQ 20
[ 1.200071] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.280585] ata6.00: ATAPI: LITE-ON DVDRW SOHW-1633S, B9S5, max UDMA/66
[ 1.296517] ata6.00: configured for UDMA/66
[ 1.412062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.416038] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.420501] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 1.420504] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.436504] ata1.00: configured for UDMA/100
[ 1.436638] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 1.436885] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.436955] sd 0:0:0:0: [sda] Write Protect is off
[ 1.436959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.436989] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.437183] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.448036] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 1.468485] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.468917] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.658078] usb 3-2: New USB device found, idVendor=047d, idProduct=1020
[ 1.658084] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.658086] usb 3-2: Product: Kensington Expert Mouse
[ 1.658089] usb 3-2: Manufacturer: Kensington
[ 1.664947] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.672604] usbcore: registered new interface driver usbhid
[ 1.672608] usbhid: USB HID core driver
[ 1.675559] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[ 1.676478] hid-generic 0003:047D:1020.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:13.1-2/input0
[ 1.700102] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000096798a, S400
[ 1.712028] tsc: Refined TSC clocksource calibration: 2188.787 MHz
[ 1.756049] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.076042] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.077011] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S B9S5 PQ: 0 ANSI: 5
[ 2.079202] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.079205] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.079325] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.079479] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.654830] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.712088] Switched to clocksource tsc
[ 4.705151] random: nonblocking pool is initialized
[ 130.612417] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 130.695270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 130.927445] systemd-udevd[266]: starting version 204
[ 131.153366] lp: driver loaded but no devices found
[ 131.179209] ppdev: user-space parallel port driver
[ 131.266992] [drm] Initialized drm 1.1.0 20060810
[ 131.375528] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 131.398036] wmi: Mapper loaded
[ 131.464080] MCE: In-kernel MCE decoding enabled.
[ 131.509893] EDAC MC: Ver: 3.0.0
[ 131.539033] AMD64 EDAC driver v3.4.0
[ 131.539086] EDAC amd64: DRAM ECC enabled.
[ 131.539090] EDAC amd64: K8 revE or earlier detected (node 0).
[ 131.539131] EDAC amd64: CS0: Double data rate SDRAM
[ 131.539133] EDAC amd64: CS2: Double data rate SDRAM
[ 131.539134] EDAC amd64: CS3: Double data rate SDRAM
[ 131.543628] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 131.545020] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 131.566361] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 131.566366] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 131.566396] Console: switching to colour dummy device 80x25
[ 131.574656] [drm] hdmi device not found 1 0 1
[ 131.574734] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x044200a2
[ 131.574737] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44 (NV44)
[ 131.574740] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 131.575342] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 131.665208] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 131.665210] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 131.665400] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 131.665404] nouveau [ VBIOS][0000:01:00.0] version 05.44.02.24.00
[ 131.716268] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 131.716273] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 131.716276] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 131.759043] type=1400 audit(1424290432.236:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=326 comm="apparmor_parser"
[ 131.759053] type=1400 audit(1424290432.236:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=326 comm="apparmor_parser"
[ 131.759059] type=1400 audit(1424290432.236:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=326 comm="apparmor_parser"
[ 131.759674] type=1400 audit(1424290432.236:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=326 comm="apparmor_parser"
[ 131.759681] type=1400 audit(1424290432.236:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=326 comm="apparmor_parser"
[ 131.760023] type=1400 audit(1424290432.236:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=326 comm="apparmor_parser"
[ 132.552086] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 132.552101] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 132.552105] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 132.576146] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 500 MHz
[ 132.576161] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz
[ 132.578486] [TTM] Zone kernel: Available graphics memory: 1024950 kiB
[ 132.578488] [TTM] Initializing pool allocator
[ 132.578493] [TTM] Initializing DMA pool allocator
[ 132.578508] nouveau [ DRM] VRAM: 60 MiB
[ 132.578510] nouveau [ DRM] GART: 512 MiB
[ 132.578515] nouveau [ DRM] TMDS table version 1.1
[ 132.578518] nouveau [ DRM] DCB version 3.0
[ 132.578521] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 132.578524] nouveau [ DRM] DCB outp 01: 01011312 00000020
[ 132.578526] nouveau [ DRM] DCB outp 02: 020223f1 0000c033
[ 132.578529] nouveau [ DRM] DCB conn 00: 0000
[ 132.578531] nouveau [ DRM] DCB conn 01: 2130
[ 132.578533] nouveau [ DRM] DCB conn 02: 0210
[ 132.578535] nouveau [ DRM] DCB conn 03: 0211
[ 132.578537] nouveau [ DRM] DCB conn 04: 0213
[ 132.586783] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 132.586788] [drm] No driver support for vblank timestamp query.
[ 132.586836] nouveau [ DRM] 0xD1F3: Parsing digital output script table
[ 132.672092] nouveau [ DRM] MM: using M2MF for buffer copies
[ 132.672105] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
[ 132.732225] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff88007afd8400
[ 132.732397] fbcon: nouveaufb (fb0) is primary device
[ 132.758208] Console: switching to colour frame buffer device 160x64
[ 132.760333] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 132.760336] nouveau 0000:01:00.0: registered panic notifier
[ 132.761454] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 133.449313] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 134.686627] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 134.688556] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 135.069812] init: failsafe main process (540) killed by TERM signal
[ 137.281712] type=1400 audit(1424290437.760:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=636 comm="apparmor_parser"
[ 137.281724] type=1400 audit(1424290437.760:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=636 comm="apparmor_parser"
[ 137.282333] type=1400 audit(1424290437.760:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=636 comm="apparmor_parser"
[ 137.408400] Bluetooth: Core ver 2.17
[ 137.408443] NET: Registered protocol family 31
[ 137.408445] Bluetooth: HCI device and connection manager initialized
[ 137.409831] Bluetooth: HCI socket layer initialized
[ 137.409839] Bluetooth: L2CAP socket layer initialized
[ 137.409854] Bluetooth: SCO socket layer initialized
[ 137.433059] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 137.433065] Bluetooth: BNEP filters: protocol multicast
[ 137.433077] Bluetooth: BNEP socket layer initialized
[ 137.448102] Bluetooth: RFCOMM TTY layer initialized
[ 137.448119] Bluetooth: RFCOMM socket layer initialized
[ 137.448127] Bluetooth: RFCOMM ver 1.11
[ 137.682322] type=1400 audit(1424290438.160:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=728 comm="apparmor_parser"
[ 137.682333] type=1400 audit(1424290438.160:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=728 comm="apparmor_parser"
[ 137.688887] type=1400 audit(1424290438.168:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=728 comm="apparmor_parser"
[ 137.693178] init: cups main process (656) killed by HUP signal
[ 137.693195] init: cups main process ended, respawning
[ 137.715255] type=1400 audit(1424290438.192:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
[ 137.715267] type=1400 audit(1424290438.192:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[ 137.715273] type=1400 audit(1424290438.192:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
[ 137.715889] type=1400 audit(1424290438.192:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[ 138.699307] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 138.716009] serial8250: too much work for irq20
[ 138.808009] serial8250: too much work for irq20
[ 138.864008] serial8250: too much work for irq20
[ 138.936009] serial8250: too much work for irq20
[ 139.016009] serial8250: too much work for irq20
[ 139.112009] serial8250: too much work for irq20
[ 139.128544] serial8250: too much work for irq20
[ 139.244002] serial8250: too much work for irq20
[ 139.300002] serial8250: too much work for irq20
[ 139.372012] serial8250: too much work for irq20
[ 143.988004] serial8250_interrupt: 40 callbacks suppressed
[ 143.988004] serial8250: too much work for irq20
[ 144.004181] serial8250: too much work for irq20
[ 144.148004] serial8250: too much work for irq20
[ 144.208007] serial8250: too much work for irq20
[ 144.228007] serial8250: too much work for irq20
[ 144.255910] serial8250: too much work for irq20
[ 144.900697] serial8250: too much work for irq20
[ 144.950448] serial8250: too much work for irq20
[ 145.100697] serial8250: too much work for irq20
[ 145.130254] serial8250: too much work for irq20
[ 149.100697] serial8250_interrupt: 6 callbacks suppressed
[ 149.100697] serial8250: too much work for irq20
[ 149.128826] serial8250: too much work for irq20
[ 171.905268] audit_printk_skb: 87 callbacks suppressed
[ 171.905274] type=1400 audit(1424290471.581:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2323 comm="apparmor_parser"
[ 171.905283] type=1400 audit(1424290471.581:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2323 comm="apparmor_parser"
[ 171.905898] type=1400 audit(1424290471.581:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2323 comm="apparmor_parser"
[ 174.278606] init: plymouth-upstart-bridge main process ended, respawning
[ 174.296773] init: plymouth-upstart-bridge main process ended, respawning
[ 218.104211] tsc: Marking TSC unstable due to cpufreq changes
[ 218.104291] Switched to clocksource acpi_pmQuestion peut-être bête :
[ 134.686627] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommendedIl ne fait pas le fsck de lui-même pendant le boot en cas de besoin ?
lshw :
description: Ordinateur de Bureau
produit: 00000000000000000000000 (To Be Filled By O.E.M.)
fabriquant: Packard Bell NEC
version: PB34101002
numéro de série: 047430120454
bits: 64 bits
fonctionnalités: smbios-2.3 dmi-2.3 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=389D43BD-2BFA-D911-8000-4E45435F4349
*-core
description: Carte mère
produit: MS-7168
fabriquant: NEC COMPUTERS INTERNATIONAL
identifiant matériel: 0
version: 1.0
emplacement: To Be Filled By O.E.M.
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: 080012
date: 05/04/2005
taille: 64KiB
capacité: 448KiB
fonctionnalités: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
*-cpu
description: CPU
produit: AMD Athlon(tm) 64 Processor 3400+
fabriquant: Advanced Micro Devices [AMD]
identifiant matériel: 4
information bus: cpu@0
version: AMD Athlon(tm) 64 Processor 3400+
numéro de série: To Be Filled By O.E.M.
emplacement: CPU 1
taille: 2200MHz
capacité: 2200MHz
bits: 64 bits
horloge: 200MHz
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt x86-64 3dnowext 3dnow rep_good nopl pni lahf_lm vmmcall cpufreq
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: pipeline-burst internal varies data
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2-Cache
taille: 512KiB
capacité: 512KiB
fonctionnalités: pipeline-burst internal varies unified
*-memory
description: Mémoire Système
identifiant matériel: 2d
emplacement: Carte mère
taille: 2GiB
*-bank:0
description: DIMM DDR Synchrone 400 MHz (2,5 ns)
produit: PartNum0
fabriquant: Manufacturer0
identifiant matériel: 0
numéro de série: SerNum0
emplacement: DIMM0
taille: 512MiB
bits: 64 bits
horloge: 400MHz (2.5ns)
*-bank:1
description: DIMM DDR Synchrone 400 MHz (2,5 ns)
produit: PartNum1
fabriquant: Manufacturer1
identifiant matériel: 1
numéro de série: SerNum1
emplacement: DIMM1
taille: 512MiB
bits: 64 bits
horloge: 400MHz (2.5ns)
*-bank:2
description: DIMM DDR Synchrone 400 MHz (2,5 ns)
produit: PartNum2
fabriquant: Manufacturer2
identifiant matériel: 2
numéro de série: SerNum2
emplacement: DIMM2
taille: 512MiB
bits: 64 bits
horloge: 400MHz (2.5ns)
*-bank:3
description: DIMM DDR Synchrone 400 MHz (2,5 ns)
produit: PartNum3
fabriquant: Manufacturer3
identifiant matériel: 3
numéro de série: SerNum3
emplacement: DIMM3
taille: 512MiB
bits: 64 bits
horloge: 400MHz (2.5ns)
*-pci:0
description: Host bridge
produit: RS480/RS482/RS485 Host Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 01
bits: 32 bits
horloge: 66MHz
*-pci:0
description: PCI bridge
produit: RS4xx PCI Express Port [ext gfx]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:0 mémoire:fa700000-fe7fffff mémoire:bff00000-dfefffff
*-display
description: VGA compatible controller
produit: NV44 [GeForce 6200 SE TurboCache]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:18 mémoire:fd000000-fdffffff mémoire:c0000000-cfffffff mémoire:fc000000-fcffffff mémoire:fe7e0000-fe7fffff
*-ide:0
description: IDE interface
produit: IXP SB400 Serial ATA Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 11
information bus: pci@0000:00:11.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm msi bus_master cap_list rom
configuration: driver=sata_sil latency=64
ressources: irq:23 portE/S:bc00(taille=8) portE/S:b800(taille=4) portE/S:b400(taille=8) portE/S:b000(taille=4) portE/S:ac00(taille=16) mémoire:febffc00-febffdff mémoire:feb00000-feb7ffff
*-ide:1
description: IDE interface
produit: IXP SB4x0 Serial ATA Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm msi bus_master cap_list rom
configuration: driver=sata_sil latency=64
ressources: irq:22 portE/S:a800(taille=8) portE/S:a400(taille=4) portE/S:a000(taille=8) portE/S:9c00(taille=4) portE/S:9800(taille=16) mémoire:febff800-febff9ff mémoire:fea80000-feafffff
*-usb:0
description: USB controller
produit: IXP SB4x0 USB Host Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 13
information bus: pci@0000:00:13.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: msi ohci bus_master cap_list
configuration: driver=ohci-pci latency=64
ressources: irq:19 mémoire:febfe000-febfefff
*-usb:1
description: USB controller
produit: IXP SB4x0 USB Host Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 13.1
information bus: pci@0000:00:13.1
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: msi ohci bus_master cap_list
configuration: driver=ohci-pci latency=64
ressources: irq:19 mémoire:febfd000-febfdfff
*-usb:2
description: USB controller
produit: IXP SB4x0 USB2 Host Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 13.2
information bus: pci@0000:00:13.2
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm msi ehci bus_master cap_list
configuration: driver=ehci-pci latency=64
ressources: irq:19 mémoire:febfc000-febfcfff
*-serial
description: SMBus
produit: IXP SB4x0 SMBus Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 10
bits: 32 bits
horloge: 66MHz
fonctionnalités: ht cap_list
configuration: driver=piix4_smbus latency=0
ressources: irq:0 portE/S:b00(taille=16) mémoire:80000000-800003ff
*-ide:2
description: IDE interface
produit: IXP SB4x0 IDE Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.1
information bus: pci@0000:00:14.1
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide msi bus_master cap_list
configuration: driver=pata_atiixp latency=64
ressources: irq:16 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:ff00(taille=16)
*-isa
description: ISA bridge
produit: IXP SB4x0 PCI-ISA Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.3
information bus: pci@0000:00:14.3
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-pci:1
description: PCI bridge
produit: IXP SB4x0 PCI-PCI Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.4
information bus: pci@0000:00:14.4
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pci subtractive_decode bus_master
ressources: portE/S:8000(taille=4096) mémoire:fe800000-fe8fffff
*-communication
description: Modem
produit: SmartLink SmartPCI562 56K Modem
fabriquant: Smart Link Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 04
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm generic bus_master cap_list
configuration: driver=serial latency=64 maxlatency=62 mingnt=1
ressources: irq:20 mémoire:fe8ff000-fe8fffff portE/S:8800(taille=256)
*-network
description: Ethernet interface
produit: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 3
information bus: pci@0000:02:03.0
nom logique: eth0
version: 10
numéro de série: 00:11:09:19:9c:15
taille: 100Mbit/s
capacité: 100Mbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.13 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
ressources: irq:20 portE/S:8400(taille=256) mémoire:fe8fe400-fe8fe4ff mémoire:fe8e0000-fe8effff
*-firewire
description: FireWire (IEEE 1394)
produit: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
fabriquant: VIA Technologies, Inc.
identifiant matériel: 4
information bus: pci@0000:02:04.0
version: 80
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=32
ressources: irq:9 mémoire:fe8fd800-fe8fdfff portE/S:8c00(taille=128)
*-multimedia
description: Multimedia audio controller
produit: IXP SB400 AC'97 Audio Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.5
information bus: pci@0000:00:14.5
version: 01
bits: 32 bits
horloge: 66MHz
fonctionnalités: msi bus_master cap_list
configuration: driver=snd_atiixp latency=64 mingnt=2
ressources: irq:17 mémoire:febff400-febff4ff
*-pci:1
description: Host bridge
produit: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 101
information bus: pci@0000:00:18.0
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: K8 [Athlon64/Opteron] Address Map
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 102
information bus: pci@0000:00:18.1
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: K8 [Athlon64/Opteron] DRAM Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 103
information bus: pci@0000:00:18.2
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=amd64_edac
ressources: irq:0
*-pci:4
description: Host bridge
produit: K8 [Athlon64/Opteron] Miscellaneous Control
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 104
information bus: pci@0000:00:18.3
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=k8temp
ressources: irq:0
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST3200822AS
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: 3.01
numéro de série: 4LJ1G3QW
taille: 186GiB (200GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=17df17de
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
version: 1.0
numéro de série: 0f91b623-fe60-43cd-abed-37afe5ac712b
taille: 29GiB
capacité: 29GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2012-10-28 10:56:42 filesystem=ext4 lastmountpoint=/ modified=2015-01-01 16:29:06 mounted=2015-01-01 16:30:46 state=clean
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
taille: 2933MiB
capacité: 2933MiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
identifiant matériel: 5
nom logique: /dev/sda5
capacité: 2933MiB
fonctionnalités: nofs
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
nom logique: /home/commun
version: 1.0
numéro de série: 7b0ddcf6-6938-4b9d-8da8-c739ec0bb4de
taille: 130GiB
capacité: 130GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2010-12-27 10:33:25 filesystem=ext4 label=home2 lastmountpoint=/home/commun modified=2015-02-18 21:13:55 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2015-02-18 21:13:55 state=mounted
*-volume:3
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 4
information bus: scsi@0:0.0.0,4
nom logique: /dev/sda4
nom logique: /
version: 1.0
numéro de série: ae9650f8-1c1b-4503-99e4-c28a81da3e4a
taille: 23GiB
capacité: 23GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2014-12-29 17:28:16 filesystem=ext4 lastmountpoint=/ modified=2015-02-18 21:13:53 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2015-02-18 21:13:53 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi5
fonctionnalités: emulated
*-cdrom
description: DVD writer
produit: DVDRW SOHW-1633S
fabriquant: LITE-ON
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: B9S5
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisclspci |grep -i vga
01:00.0 VGA compatible controller: NVIDIA Corporation NV44 [GeForce 6200 SE TurboCache] (rev a1)sudo parted -l
Modèle: ATA ST3200822AS (scsi)
Disque /dev/sda : 200GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Numéro Début Fin Taille Type Système de fichiers Fanions
1 32,3kB 31,8GB 31,8GB primary ext4
4 31,8GB 57,2GB 25,4GB primary ext4 démarrage
3 57,2GB 197GB 140GB primary ext4
2 197GB 200GB 3076MB extended
5 197GB 200GB 3076MB logical linux-swap(v1)cat /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda4 during installation
UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=c355445a-ad22-40cb-a94e-dbced4cd1fa5 none swap sw 0 0
# Ajout manuel
/dev/sda3 /home/commun ext4 rw,nosuid,nodev,uhelper=udisks2 0 0sudo blkid
/dev/sda1: UUID="0f91b623-fe60-43cd-abed-37afe5ac712b" TYPE="ext4"
/dev/sda3: LABEL="home2" UUID="7b0ddcf6-6938-4b9d-8da8-c739ec0bb4de" TYPE="ext4"
/dev/sda4: UUID="ae9650f8-1c1b-4503-99e4-c28a81da3e4a" TYPE="ext4"
/dev/sda5: UUID="c355445a-ad22-40cb-a94e-dbced4cd1fa5" TYPE="swap" sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-45-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model: ST3200822AS
Serial Number: 4LJ1G3QW
Firmware Version: 3.01
User Capacity: 200 049 647 616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Wed Feb 18 22:06:34 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)Et voili
J'espère que ça te parle plus qu'à moi
Dernière modification par fgi (Le 18/02/2015, à 23:08)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#5 Le 19/02/2015, à 00:42
- moko138
Re : [Résolu]Temps de boot 14.04
Holà !
Ne te sers de sda1 sous aucun prétexte jusqu'à nouvel ordre !
Détails suivent.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 19/02/2015, à 04:52
- moko138
Re : [Résolu]Temps de boot 14.04
Bien pour le débranchement et l'aspirateur !
Aspire aussi tous les connecteurs extérieurs de ta tour (avant et arrière), après avoir débranché tout ce qui pouvait y être branché.
En résumé :
Vérifier, en live, sda3
Débrancher le modem 56k
Réinstaller proprement
En détail :
1) D'abord je voudrais les retours complets (prompt compris !) et séparés de :
1.1) dans ta session actuelle (/ sur sda4)
ls /homels -la /home/*/.xs*ls -la /home/commun/*/.xs*1.2) en session live,
vérification de sda3 :
en remplaçant x (2 fois) par la lettre correspondant à ton disque en session live
sudo umount /dev/sdx3 && sudo fsck.ext4 -yfv /dev/sdx3Consultation de l'état du disque :
(là encore en remplaçant x par la lettre du moment)
udisks --show-info /dev/sdx2) Débrancher le modem 56k :
Dans ton sudo lshw, on peut lire
*-communication
description: Modem
produit: SmartLink SmartPCI562 56K Modem
configuration: driver=serial
ressources: irq:20
Ah ah ! Cf.
serial8250: too much work for irq20Ça m'étonnerait que tu te serves encore de cette antiquité.
Si, comme il est probable, c'est une carte-fille perpendiculaire à la carte mère, je te prie de la démonter (tournevis de nouveau)
Tu la reconnaîtras à ce qu'elle possède une prise RJ11, comme la RJ45 de ton câble éthernet mais en plus étroit, et à 4 broches au lieu de 8.
Cela soulagera l'irq20, utilisée, elle aussi, par ta carte réseau principale :
*-network
description: Ethernet interface
produit: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
configuration: driver=8139too
ressources: irq:20
Dans le bios, mets "Reset Configuration Data" sur "enabled" (cette capture correspond à un BIOS Phoenix Award, pas très différent de ton AMI/American Megatrends Inc.)
Pendant que tu y es, vérifie que "Resources Controlled by" est bien réglé sur "auto".
À l'avenir, tu répèteras cette activation (car je crois que le bios AMI ne la mémorise pas) après chaque modification matérielle importante.
3) Réinstaller proprement :
Deux Os (sda1 et sda4) et "/home/commun" en sda3:
Houlà !
Si l'OS en sda1 - quel est-il ? - n'est pas lui aussi un 14.04, tu cours à la catastrophe !
Voilà pourquoi il ne faut pas démarrer sur l'OS installé en sda1 sous aucun prétexte jusqu'à nouvel ordre.
Ton fstab : Holà !
# Ajout manuel
/dev/sda3 /home/commun ext4 rw,nosuid,nodev,uhelper=udisks2 0 0Note le 0 final qui ordonne "pas de vérification automatique du système de fichiers" !
Ce qui répond à ta question :
Il ne fait pas le fsck de lui-même pendant le boot en cas de besoin ?
D'autre part tu as omis de définir un /home pendant l'installation ET tu as défini "/home/commun" ultérieurement.
D'où il résulte (sauf manipulation intermédiaire) un /home par défaut dans ta racine sda4 ET /home/commun dans sda3.
Troisièmement, uhelper=udisks2 correspond à un branchement de DDE en usb...
Donc cette ligne de ton fstab était totalement désastreuse.
mount_fstab t'en dira plus sur "defaults" et autres options de montage.
Avant de réinstaller on va corriger le fstab de sda1 et faire plusieurs choses, mais c'est déjà un autre chantier.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 19/02/2015, à 22:19
- fgi
Re : [Résolu]Temps de boot 14.04
Merci, merci
bon, quelques éléments de réponse, puis je me lance dans les manips et je reviendrais avec des compléments :
moko138 a écrit :
1) D'abord je voudrais les retours complets (prompt compris !) et séparés de :
1.1) dans ta session actuelle (/ sur sda4)ls /homels -la /home/*/.xs*ls -la /home/commun/*/.xs*
Alors 1ere précision : C'est un ordi de famille, donc avec plusieurs comptes. J'ai en effet un reliquat d'une époque où j'étais en dual boot avec 2 version de Linux, et où j'avais mis sur un disque à part les répertoires de fichier des home (Musique, Images ...), et sur les /home de chacune des distribs j'avais laissé les répertoires cachés car sensibles à la distrib.
En complément, j'ai un dossier "commun" pour partager entre tous les fichiers de la famille : photos, musique...
Du coup, j'ai gardé un chainage par liens symboliques, qui mériterait d'être simplifié ....
Ca donne :
francis@g:~$ ls /home
alexia auriane commun francis romain sandrine
francis@g:~$ francis@g:~$ ls -la /home/*/.xs*
-rw-r--r-- 1 alexia alexia 14 déc. 29 21:12 /home/alexia/.xscreensaver
-rw------- 1 alexia alexia 243 févr. 16 11:39 /home/alexia/.xsession-errors
-rw------- 1 alexia alexia 243 févr. 9 14:07 /home/alexia/.xsession-errors.old
-rw-r--r-- 1 auriane auriane 14 déc. 29 19:47 /home/auriane/.xscreensaver
-rw------- 1 auriane auriane 243 févr. 19 20:44 /home/auriane/.xsession-errors
-rw------- 1 auriane auriane 243 févr. 14 14:53 /home/auriane/.xsession-errors.old
-rw-r--r-- 1 francis francis 7570 déc. 31 19:02 /home/francis/.xscreensaver
-rw------- 1 francis francis 200 févr. 19 20:45 /home/francis/.xsession-errors
-rw------- 1 francis francis 243 févr. 18 22:29 /home/francis/.xsession-errors.old
-rw-r--r-- 1 romain romain 14 déc. 29 21:12 /home/romain/.xscreensaver
-rw------- 1 romain romain 243 févr. 18 20:45 /home/romain/.xsession-errors
-rw------- 1 romain romain 243 févr. 17 21:28 /home/romain/.xsession-errors.old
-rw-r--r-- 1 sandrine sandrine 14 déc. 29 21:11 /home/sandrine/.xscreensaver
-rw------- 1 sandrine sandrine 243 févr. 19 17:08 /home/sandrine/.xsession-errors
-rw------- 1 sandrine sandrine 243 févr. 19 13:42 /home/sandrine/.xsession-errors.old
francis@g:~$ Dis, j'ai un peu peur, là ... je sens que tu vas me demander le contenu du .xsession-errors ... ;-)
Aller, on gagne un tour :
openConnection: connect: Aucun fichier ou dossier de ce type
cannot connect to brltty at :0
Script for none started at run_im.
Script for auto started at run_im.
Script for default started at run_im.Ensuite :
francis@g:~$ ls -la /home/commun/*/.xs*
-rw------- 1 alexia alexia 4337 oct. 28 2012 /home/commun/alexia/.xsession-errors
-rw------- 1 alexia alexia 15454 oct. 21 2012 /home/commun/alexia/.xsession-errors.old
-rw------- 1 auriane auriane 4405 oct. 21 2012 /home/commun/auriane/.xsession-errors
-rw------- 1 auriane auriane 2811 oct. 21 2012 /home/commun/auriane/.xsession-errors.old
-rw-rw-r-- 1 francis francis 573 déc. 24 2009 /home/commun/francis/.xscreensaver-getimage.cache
-rw------- 1 francis francis 5888 oct. 30 2012 /home/commun/francis/.xsession-errors
-rw------- 1 francis francis 4782 oct. 30 2012 /home/commun/francis/.xsession-errors.old
-rw------- 1 romain romain 5079 oct. 23 2012 /home/commun/romain/.xsession-errors
-rw------- 1 romain romain 4908 oct. 23 2012 /home/commun/romain/.xsession-errors.old
-rw------- 1 sandrine sandrine 3345 oct. 29 2012 /home/commun/sandrine/.xsession-errors
-rw------- 1 sandrine sandrine 6959 oct. 28 2012 /home/commun/sandrine/.xsession-errors.old
francis@g:~$ En live :
root@ubuntu:/home/ubuntu# fsck.ext4 -yfv /dev/sda3
e2fsck 1.41.11 (14-Mar-2010)
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe
105993 inodes used (1.24%)
2817 non-contiguous files (2.7%)
42 non-contiguous directories (0.0%)
nombre d'i-noeuds avec des blocs ind/dind/tind : 0/0/0
Histogramme des profondeurs d'extents : 105598/300/6
23174704 blocks used (67.92%)
0 bad blocks
3 large files
81235 regular files
24664 directories
0 character device files
0 block device files
6 fifos
0 links
79 symbolic links (73 fast symbolic links)
0 sockets
--------
105984 files
root@ubuntu:/home/ubuntu#Toujours en live :
root@ubuntu:/home/ubuntu# udisks --show-info /dev/sda
Showing information for /org/freedesktop/UDisks/devices/sda
native-path: /sys/devices/pci0000:00/0000:00:11.0/host2/target2:0:0/2:0:0:0/block/sda
device: 8:0
device-file: /dev/sda
presentation: /dev/sda
by-id: /dev/disk/by-id/ata-ST3200822AS_4LJ1G3QW
by-id: /dev/disk/by-id/scsi-SATA_ST3200822AS_4LJ1G3QW
by-path: /dev/disk/by-path/pci-0000:00:11.0-scsi-0:0:0:0
detected at: jeu. 19 févr. 2015 20:43:01 UTC
system internal: 1
removable: 0
has media: 1 (detected at jeu. 19 févr. 2015 20:43:01 UTC)
detects change: 0
detection by polling: 0
detection inhibitable: 0
detection inhibited: 0
is read only: 0
is mounted: 0
mount paths:
mounted by uid: 0
presentation hide: 0
presentation nopolicy: 0
presentation name:
presentation icon:
size: 200049647616
block size: 512
job underway: no
usage:
type:
version:
uuid:
label:
partition table:
scheme: mbr
count: 5
drive:
vendor: ATA
model: ST3200822AS
revision: 3.01
serial: 4LJ1G3QW
WWN:
detachable: 0
can spindown: 1
rotational media: Yes, unknown rate
write-cache: enabled
ejectable: 0
adapter: /org/freedesktop/UDisks/adapters/0000_3a00_3a11_2e0
ports:
/org/freedesktop/UDisks/adapters/0000_3a00_3a11_2e0/host2
similar devices:
media:
compat:
interface: ata
if speed: (unknown)
ATA SMART: Data not collected
root@ubuntu:/home/ubuntu# moko138 a écrit :
2) Débrancher le modem 56k :
[...]
Ça m'étonnerait que tu te serves encore de cette antiquité.
Si, comme il est probable, c'est une carte-fille perpendiculaire à la carte mère, je te prie de la démonter (tournevis de nouveau)
Tu la reconnaîtras à ce qu'elle possède une prise RJ11, comme la RJ45 de ton câble éthernet mais en plus étroit, et à 4 broches au lieu de 8.
Faisant moi-même partie des antiquité (j'ai eu utilisé un modem 9600 pour jouer avec des BBS ... vi monsieur ), pas de problème pour reconnaitre la carte modem. Et au passage je vire la carte TV analogique qui ne sert plus à rien depuis le passage en TNT... Ca c'est fait
moko138 a écrit :
Dans le bios, mets "Reset Configuration Data" sur "enabled" (cette capture correspond à un BIOS Phoenix Award, pas très différent de ton AMI/American Megatrends Inc.)
Pendant que tu y es, vérifie que "Resources Controlled by" est bien réglé sur "auto".
Alors là, je n'ai pas trouvé ces paramètres dans mon BIOS ...
A ce stade, au reboot, je compte 2:14 entre le grub et l'écran de login.
et 38 sec pour ouvrir la session.
Voici le dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-7168, BIOS 080012 05/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[ 0.000000] [mem 0x7fe00000-0x7ffcffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff]
[ 0.000000] ACPI: RSDP 00000000000f9070 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffd0000 000038 (v01 A M I OEMRSDT 05000504 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffd0200 000084 (v02 A M I OEMFACP 05000504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffd0430 0037BD (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffde000 000040
[ 0.000000] ACPI: APIC 000000007ffd0390 000054 (v01 A M I OEMAPIC 05000504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffd03f0 00003C (v01 A M I OEMMCFG 05000504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffd3bf0 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 000000007ffde040 000056 (v01 A M I AMI_OEM 05000504 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
[ 0.000000] NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520144 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82368 r8192 d24128 u2097152
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 91c8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028288K/2096568K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 68280K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.813 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.62 BogoMIPS (lpj=8755252)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004077] AppArmor: AppArmor initialized
[ 0.004079] Yama: becoming mindful.
[ 0.004380] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009064] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009835] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.009842] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010165] Initializing cgroup subsys memory
[ 0.010177] Initializing cgroup subsys devices
[ 0.010179] Initializing cgroup subsys freezer
[ 0.010182] Initializing cgroup subsys blkio
[ 0.010184] Initializing cgroup subsys perf_event
[ 0.010187] Initializing cgroup subsys hugetlb
[ 0.010212] tseg: 0000000000
[ 0.010220] mce: CPU supports 5 MCE banks
[ 0.010230] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010230] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010230] tlb_flushall_shift: 4
[ 0.018922] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.019898] ACPI: Core revision 20131115
[ 0.021835] ACPI: All ACPI Tables successfully acquired
[ 0.022110] ftrace: allocating 28554 entries in 112 pages
[ 0.032572] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.074006] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 2f, stepping: 00)
[ 0.076000] Performance Events: AMD PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 48
[ 0.076000] ... generic registers: 4
[ 0.076000] ... value mask: 0000ffffffffffff
[ 0.076000] ... max period: 00007fffffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000000000f
[ 0.076000] x86: Booted up 1 node, 1 CPUs
[ 0.076000] smpboot: Total of 1 processors activated (4377.62 BogoMIPS)
[ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] devtmpfs: initialized
[ 0.079062] EVM: security.selinux
[ 0.079064] EVM: security.SMACK64
[ 0.079065] EVM: security.ima
[ 0.079066] EVM: security.capability
[ 0.079147] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.080699] pinctrl core: initialized pinctrl subsystem
[ 0.080794] regulator-dummy: no parameters
[ 0.080836] RTC time: 22:05:46, date: 02/19/15
[ 0.080888] NET: Registered protocol family 16
[ 0.081061] cpuidle: using governor ladder
[ 0.081064] cpuidle: using governor menu
[ 0.081070] node 0 link 0: io port [1000, ffffff]
[ 0.081074] TOM: 0000000080000000 aka 2048M
[ 0.081077] node 0 link 0: mmio [e0000000, efffffff]
[ 0.081080] node 0 link 0: mmio [80000000, dfffffff]
[ 0.081082] node 0 link 0: mmio [a0000, bffff]
[ 0.081085] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.081088] bus: [bus 00-ff] on node 0 link 0
[ 0.081090] bus: 00 [io 0x0000-0xffff]
[ 0.081092] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.081093] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.081146] ACPI: bus type PCI registered
[ 0.081149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.081223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081227] PCI: not using MMCONFIG
[ 0.081229] PCI: Using configuration type 1 for base access
[ 0.082457] bio: create slab <bio-0> at 0
[ 0.082635] ACPI: Added _OSI(Module Device)
[ 0.082637] ACPI: Added _OSI(Processor Device)
[ 0.082639] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082641] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084044] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.085624] ACPI: Interpreter enabled
[ 0.085631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.085636] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.085652] ACPI: (supports S0 S3 S4 S5)
[ 0.085654] ACPI: Using IOAPIC for interrupt routing
[ 0.085740] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.086939] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.096509] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.096644] ACPI: No dock devices found.
[ 0.102201] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.102209] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.102216] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.102346] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.102349] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.102351] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.102354] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.102356] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.102359] PCI: root bus 00: hardware-probed resources
[ 0.102578] PCI host bridge to bus 0000:00
[ 0.102582] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.102585] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.102587] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.102590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.102598] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.102695] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.102731] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.102782] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.102853] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
[ 0.102880] pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.102894] pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
[ 0.102907] pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
[ 0.102920] pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.102933] pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
[ 0.102947] pci 0000:00:11.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[ 0.102960] pci 0000:00:11.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.103014] pci 0000:00:11.0: supports D1 D2
[ 0.103103] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
[ 0.103129] pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
[ 0.103142] pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
[ 0.103156] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.103169] pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
[ 0.103182] pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
[ 0.103195] pci 0000:00:12.0: reg 0x24: [mem 0xfebff800-0xfebff9ff]
[ 0.103209] pci 0000:00:12.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.103262] pci 0000:00:12.0: supports D1 D2
[ 0.103347] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.103371] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.103521] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.103569] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.103593] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.103743] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.103793] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.103820] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.103938] pci 0000:00:13.2: supports D1 D2
[ 0.103941] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.104004] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.104057] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.104079] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.104092] pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
[ 0.104151] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.104268] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.104292] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.104305] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.104318] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.104331] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.104344] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.104484] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.104647] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.104737] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.104781] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.104805] pci 0000:00:14.5: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.104953] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.104996] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.105075] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.105151] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.105225] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.105358] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.105369] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.105381] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.105392] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.105405] pci 0000:01:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 0.105473] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.105481] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.105486] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.105489] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.105540] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.105568] pci 0000:02:03.0: reg 0x10: [io 0x8800-0x88ff]
[ 0.105584] pci 0000:02:03.0: reg 0x14: [mem 0xfe8fe400-0xfe8fe4ff]
[ 0.105654] pci 0000:02:03.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.105702] pci 0000:02:03.0: supports D1 D2
[ 0.105704] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.105768] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.105798] pci 0000:02:04.0: reg 0x10: [mem 0xfe8fd800-0xfe8fdfff]
[ 0.105814] pci 0000:02:04.0: reg 0x14: [io 0x8c00-0x8c7f]
[ 0.105933] pci 0000:02:04.0: supports D2
[ 0.105936] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.106045] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.106054] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.106059] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.106065] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.106068] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.106071] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.106745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106807] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106866] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106924] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106983] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107041] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.107097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107241] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.107267] Found 1 acpi root devices
[ 0.107412] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.107415] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.107416] vgaarb: loaded
[ 0.107418] vgaarb: bridge control possible 0000:01:00.0
[ 0.107649] SCSI subsystem initialized
[ 0.107721] libata version 3.00 loaded.
[ 0.107750] ACPI: bus type USB registered
[ 0.107773] usbcore: registered new interface driver usbfs
[ 0.107783] usbcore: registered new interface driver hub
[ 0.107814] usbcore: registered new device driver usb
[ 0.107930] PCI: Using ACPI for IRQ routing
[ 0.119951] PCI: pci_cache_line_size set to 64 bytes
[ 0.120016] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.120019] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.120127] NetLabel: Initializing
[ 0.120128] NetLabel: domain hash size = 128
[ 0.120130] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120146] NetLabel: unlabeled traffic allowed by default
[ 0.120268] Switched to clocksource refined-jiffies
[ 0.128626] AppArmor: AppArmor Filesystem Enabled
[ 0.128667] pnp: PnP ACPI init
[ 0.128685] ACPI: bus type PNP registered
[ 0.128759] pnp 00:00: [dma 4]
[ 0.128793] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.128836] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.128865] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.128894] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129464] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.129467] system 00:04: [io 0x040b] has been reserved
[ 0.129470] system 00:04: [io 0x04d6] has been reserved
[ 0.129473] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.129476] system 00:04: [io 0x0c14] has been reserved
[ 0.129478] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.129481] system 00:04: [io 0x0c52] has been reserved
[ 0.129484] system 00:04: [io 0x0c6c] has been reserved
[ 0.129486] system 00:04: [io 0x0c6f] has been reserved
[ 0.129489] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.129492] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.129495] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.129498] system 00:04: [io 0x0800-0x089f] could not be reserved
[ 0.129500] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.129503] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.129507] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.129511] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129571] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.129678] system 00:06: [io 0x0e00-0x0e7f] has been reserved
[ 0.129681] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129758] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.129761] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.129764] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129829] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.129833] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129987] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.129991] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.129994] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.129997] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.130000] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130118] pnp: PnP ACPI: found 10 devices
[ 0.130120] ACPI: bus type PNP unregistered
[ 0.136285] Switched to clocksource acpi_pm
[ 0.136321] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 0.136329] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.136333] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.136336] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.136341] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.136345] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.136352] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.136364] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.136367] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136369] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136372] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
[ 0.136374] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.136377] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.136380] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.136382] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.136384] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136387] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136435] NET: Registered protocol family 2
[ 0.136710] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.136821] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.136956] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.137035] TCP: reno registered
[ 0.137041] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137075] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137194] NET: Registered protocol family 1
[ 0.137209] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.292169] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.292179] PCI: CLS 64 bytes, default 64
[ 0.292262] Trying to unpack rootfs image as initramfs...
[ 0.711166] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000)
[ 0.711568] microcode: AMD CPU family 0xf not supported
[ 0.711570] Scanning for low memory corruption every 60 seconds
[ 0.711857] Initialise system trusted keyring
[ 0.711922] audit: initializing netlink socket (disabled)
[ 0.711938] type=2000 audit(1424383546.707:1): initialized
[ 0.744087] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.745490] zbud: loaded
[ 0.745663] VFS: Disk quotas dquot_6.5.2
[ 0.745722] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.746320] fuse init (API version 7.22)
[ 0.746408] msgmni has been set to 3998
[ 0.746475] Key type big_key registered
[ 0.746810] Key type asymmetric registered
[ 0.746812] Asymmetric key parser 'x509' registered
[ 0.746851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.746889] io scheduler noop registered
[ 0.746891] io scheduler deadline registered (default)
[ 0.746919] io scheduler cfq registered
[ 0.747058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.747079] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.747123] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.747124] vesafb: scrolling: redraw
[ 0.747127] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.747328] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.805113] Console: switching to colour frame buffer device 160x64
[ 0.862833] fb0: VESA VGA frame buffer device
[ 0.862879] ipmi message handler version 39.2
[ 0.862954] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.862960] ACPI: Power Button [PWRB]
[ 0.863002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.863005] ACPI: Power Button [PWRF]
[ 0.863042] ACPI: duty_cycle spans bit 4
[ 0.863130] GHES: HEST is not enabled!
[ 0.863220] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.864619] Linux agpgart interface v0.103
[ 0.864742] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.864771] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.864774] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.864798] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.864800] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.866341] brd: module loaded
[ 0.867201] loop: module loaded
[ 0.867709] libphy: Fixed MDIO Bus: probed
[ 0.867822] tun: Universal TUN/TAP device driver, 1.6
[ 0.867823] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.867868] PPP generic driver version 2.4.2
[ 0.867910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.867916] ehci-pci: EHCI PCI platform driver
[ 0.868060] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.868068] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.868142] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 0.880022] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.880118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880123] usb usb1: Product: EHCI Host Controller
[ 0.880125] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 0.880128] usb usb1: SerialNumber: 0000:00:13.2
[ 0.880247] hub 1-0:1.0: USB hub found
[ 0.880257] hub 1-0:1.0: 8 ports detected
[ 0.880468] ehci-platform: EHCI generic platform driver
[ 0.880481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.880482] ohci-pci: OHCI PCI platform driver
[ 0.880560] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.880566] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.880584] ohci-pci 0000:00:13.0: irq 19, io mem 0xfebfe000
[ 0.940065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.940068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940070] usb usb2: Product: OHCI PCI host controller
[ 0.940072] usb usb2: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 0.940075] usb usb2: SerialNumber: 0000:00:13.0
[ 0.940173] hub 2-0:1.0: USB hub found
[ 0.940185] hub 2-0:1.0: 4 ports detected
[ 0.940341] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.940349] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.940366] ohci-pci 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 1.000060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.000062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000065] usb usb3: Product: OHCI PCI host controller
[ 1.000067] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 1.000069] usb usb3: SerialNumber: 0000:00:13.1
[ 1.000184] hub 3-0:1.0: USB hub found
[ 1.000196] hub 3-0:1.0: 4 ports detected
[ 1.000303] ohci-platform: OHCI generic platform driver
[ 1.000314] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000390] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.000392] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.001178] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.001280] mousedev: PS/2 mouse device common for all mice
[ 1.001400] rtc_cmos 00:01: RTC can wake from S4
[ 1.001546] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.001576] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.001658] device-mapper: uevent: version 1.0.3
[ 1.001729] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.001736] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.001867] TCP: cubic registered
[ 1.001973] NET: Registered protocol family 10
[ 1.002201] NET: Registered protocol family 17
[ 1.002213] Key type dns_resolver registered
[ 1.002425] Loading compiled-in X.509 certificates
[ 1.003675] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.003691] registered taskstats version 1
[ 1.006554] Key type trusted registered
[ 1.009086] Key type encrypted registered
[ 1.011570] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.011576] IMA: No TPM chip found, activating TPM-bypass!
[ 1.011839] regulator-dummy: disabling
[ 1.011887] Magic number: 3:251:98
[ 1.011999] rtc_cmos 00:01: setting system clock to 2015-02-19 22:05:47 UTC (1424383547)
[ 1.012225] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 1.012227] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.012229] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.012231] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.012256] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 1.012264] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.012265] EDD information not available.
[ 1.012309] PM: Hibernation image not present or could not be loaded.
[ 1.014564] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.014569] Write protecting the kernel read-only data: 12288k
[ 1.017892] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.020854] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.029061] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.040382] systemd-udevd[90]: starting version 204
[ 1.067941] sata_sil 0000:00:11.0: version 2.4
[ 1.085348] scsi0 : sata_sil
[ 1.088105] scsi1 : sata_sil
[ 1.088181] ata1: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffc80 irq 23
[ 1.088186] ata2: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffcc0 irq 23
[ 1.090998] scsi2 : sata_sil
[ 1.093723] scsi3 : sata_sil
[ 1.093787] ata3: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff880 irq 22
[ 1.093791] ata4: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff8c0 irq 22
[ 1.101578] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.101604] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.103791] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.104956] scsi4 : pata_atiixp
[ 1.109056] scsi5 : pata_atiixp
[ 1.109124] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.109127] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.117864] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0000000000018800, 00:11:09:19:9c:15, IRQ 20
[ 1.184065] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.284585] ata6.00: ATAPI: LITE-ON DVDRW SOHW-1633S, B9S5, max UDMA/66
[ 1.300525] ata6.00: configured for UDMA/66
[ 1.408062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412038] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.416482] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 1.416485] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.432494] ata1.00: configured for UDMA/100
[ 1.432627] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 1.432874] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.432943] sd 0:0:0:0: [sda] Write Protect is off
[ 1.432946] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.432976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.433179] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.452043] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 1.465822] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.466255] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.662070] usb 3-2: New USB device found, idVendor=047d, idProduct=1020
[ 1.662076] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.662079] usb 3-2: Product: Kensington Expert Mouse
[ 1.662081] usb 3-2: Manufacturer: Kensington
[ 1.668589] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.675571] usbcore: registered new interface driver usbhid
[ 1.675576] usbhid: USB HID core driver
[ 1.678444] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[ 1.679508] hid-generic 0003:047D:1020.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:13.1-2/input0
[ 1.684113] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000096798a, S400
[ 1.708027] tsc: Refined TSC clocksource calibration: 2188.787 MHz
[ 1.752050] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.072049] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.072970] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S B9S5 PQ: 0 ANSI: 5
[ 2.075155] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.075158] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.075275] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.075428] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.351594] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.708093] Switched to clocksource tsc
[ 8.609565] random: nonblocking pool is initialized
[ 101.414309] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 101.925380] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 102.164829] systemd-udevd[266]: starting version 204
[ 102.449468] lp: driver loaded but no devices found
[ 102.483258] ppdev: user-space parallel port driver
[ 102.608856] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 102.741217] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 102.754766] [drm] Initialized drm 1.1.0 20060810
[ 102.770116] MCE: In-kernel MCE decoding enabled.
[ 102.857913] EDAC MC: Ver: 3.0.0
[ 102.862742] AMD64 EDAC driver v3.4.0
[ 102.862782] EDAC amd64: DRAM ECC enabled.
[ 102.862787] EDAC amd64: K8 revE or earlier detected (node 0).
[ 102.862831] EDAC amd64: CS0: Double data rate SDRAM
[ 102.862833] EDAC amd64: CS2: Double data rate SDRAM
[ 102.862835] EDAC amd64: CS3: Double data rate SDRAM
[ 102.864353] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 102.864414] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 102.916427] wmi: Mapper loaded
[ 103.108762] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 103.108767] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 103.108798] Console: switching to colour dummy device 80x25
[ 103.116405] [drm] hdmi device not found 1 0 1
[ 103.116481] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x044200a2
[ 103.116484] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44 (NV44)
[ 103.116487] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 103.117090] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 103.206815] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 103.206818] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 103.207009] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 103.207012] nouveau [ VBIOS][0000:01:00.0] version 05.44.02.24.00
[ 103.241399] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 103.241401] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 103.241402] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 103.255059] type=1400 audit(1424383649.737:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=351 comm="apparmor_parser"
[ 103.255066] type=1400 audit(1424383649.737:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=351 comm="apparmor_parser"
[ 103.255071] type=1400 audit(1424383649.737:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"
[ 103.255686] type=1400 audit(1424383649.737:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=351 comm="apparmor_parser"
[ 103.255692] type=1400 audit(1424383649.737:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"
[ 103.256449] type=1400 audit(1424383649.741:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"
[ 103.865410] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 103.865423] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 103.865428] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 103.957239] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 500 MHz
[ 103.957255] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz
[ 103.961073] [TTM] Zone kernel: Available graphics memory: 1024950 kiB
[ 103.961077] [TTM] Initializing pool allocator
[ 103.961083] [TTM] Initializing DMA pool allocator
[ 103.961101] nouveau [ DRM] VRAM: 60 MiB
[ 103.961103] nouveau [ DRM] GART: 512 MiB
[ 103.961108] nouveau [ DRM] TMDS table version 1.1
[ 103.961110] nouveau [ DRM] DCB version 3.0
[ 103.961114] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 103.961117] nouveau [ DRM] DCB outp 01: 01011312 00000020
[ 103.961119] nouveau [ DRM] DCB outp 02: 020223f1 0000c033
[ 103.961121] nouveau [ DRM] DCB conn 00: 0000
[ 103.961123] nouveau [ DRM] DCB conn 01: 2130
[ 103.961125] nouveau [ DRM] DCB conn 02: 0210
[ 103.961127] nouveau [ DRM] DCB conn 03: 0211
[ 103.961129] nouveau [ DRM] DCB conn 04: 0213
[ 103.965986] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 103.965992] [drm] No driver support for vblank timestamp query.
[ 103.966042] nouveau [ DRM] 0xD1F3: Parsing digital output script table
[ 104.023587] nouveau [ DRM] MM: using M2MF for buffer copies
[ 104.023599] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
[ 104.128248] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff880036818c00
[ 104.128425] fbcon: nouveaufb (fb0) is primary device
[ 104.190152] Console: switching to colour frame buffer device 160x64
[ 104.192517] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 104.192520] nouveau 0000:01:00.0: registered panic notifier
[ 104.192527] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 104.254533] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 105.036165] init: failsafe main process (555) killed by TERM signal
[ 105.883754] type=1400 audit(1424383652.365:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=631 comm="apparmor_parser"
[ 105.883766] type=1400 audit(1424383652.365:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=631 comm="apparmor_parser"
[ 105.888812] type=1400 audit(1424383652.373:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=631 comm="apparmor_parser"
[ 106.169802] Bluetooth: Core ver 2.17
[ 106.169902] NET: Registered protocol family 31
[ 106.169904] Bluetooth: HCI device and connection manager initialized
[ 106.171311] Bluetooth: HCI socket layer initialized
[ 106.171318] Bluetooth: L2CAP socket layer initialized
[ 106.171331] Bluetooth: SCO socket layer initialized
[ 106.187588] Bluetooth: RFCOMM TTY layer initialized
[ 106.187604] Bluetooth: RFCOMM socket layer initialized
[ 106.187615] Bluetooth: RFCOMM ver 1.11
[ 106.283782] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 106.283788] Bluetooth: BNEP filters: protocol multicast
[ 106.283800] Bluetooth: BNEP socket layer initialized
[ 106.309153] init: cups main process (638) killed by HUP signal
[ 106.309169] init: cups main process ended, respawning
[ 106.784574] type=1400 audit(1424383653.269:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=717 comm="apparmor_parser"
[ 107.574180] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 110.177016] audit_printk_skb: 102 callbacks suppressed
[ 110.177021] type=1400 audit(1424383656.661:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=997 comm="apparmor_parser"
[ 124.732298] init: plymouth-upstart-bridge main process (154) killed by TERM signal
[ 135.998296] type=1400 audit(1424383681.919:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2693 comm="apparmor_parser"
[ 135.998309] type=1400 audit(1424383681.919:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2693 comm="apparmor_parser"
[ 135.998926] type=1400 audit(1424383681.919:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2693 comm="apparmor_parser"
[ 191.036147] tsc: Marking TSC unstable due to cpufreq changes
[ 191.044071] Switched to clocksource acpi_pmmoko138 a écrit :
3) Réinstaller proprement :
Deux Os (sda1 et sda4) et "/home/commun" en sda3:
Houlà !
Si l'OS en sda1 - quel est-il ? - n'est pas lui aussi un 14.04, tu cours à la catastrophe !
Voilà pourquoi il ne faut pas démarrer sur l'OS installé en sda1 sous aucun prétexte jusqu'à nouvel ordre.
C'est ma 10.04 historique, gardée au cas où ... ok, je vais la faire sauter lors de la prochaine install.
Note qu'il y a un /home dessus, avec les liens symboliques vers le commun. Histoire d'éviter la cata que tu crains, à juste titre !!
(Je ne suis pas ultra pointu, mais je pense avoir compris quelques basiques ... )
Pour la suite : fstab & co, je regarde une fois les étapes précédentes mises au clair ... et ma live USB vérifiée ...
Merci encore pour ta persévérence ...
Dernière modification par fgi (Le 20/02/2015, à 00:14)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#8 Le 20/02/2015, à 01:11
- moko138
Re : [Résolu]Temps de boot 14.04
Très bien pour l'heureux résultat de fsck sur sda3 !
j'ai eu utilisé un modem 9600 pour jouer avec des BBS ... vi monsieur
Alors là...chapeau, Monsieur !
"BBS" euh..."Brigitte Bardot solitaire" ?
Et au passage je vire la carte TV analogique qui ne sert plus (...) Ca c'est fait
wunderbach ! tu vas gagner du temps là-dessus aussi.
Il faut activer smart. Je viens de parcourir le man, mais je m'endors :
demain, il fera jour.
En attendant, tu peux changer dans fstab
NB : dans 14.04, tu remplaces gksudp par pkexec
EDIT : houlà ! ça se voit que je m'endormais ! Je voulais dire :
"- sachant que, dans 14.04, pkexec a remplacé gksudo -" FIN d'édit
/dev/sda3 /home/commun ext4 rw,nosuid,nodev,uhelper=udisks2 0 0en
/dev/sda3 /home/commun ext4 defaults 0 2Puis
sudo update-grubet tu redémarres.
A demain !
Dernière modification par moko138 (Le 20/02/2015, à 07:23)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 20/02/2015, à 08:47
- fgi
Re : [Résolu]Temps de boot 14.04
moko138 a écrit :
"BBS" euh..."Brigitte Bardot solitaire" ?
Dans les années 90, les BBS étaient les serveurs de téléchargement à l'ère minitel ... le modem était LA fenêtre ouverte sur le vaste monde
Il est vrai que Brigitte B était ... heuu ... n'était pas ... enfin ... tu me comprends 
moko138 a écrit :
/dev/sda3 /home/commun ext4 rw,nosuid,nodev,uhelper=udisks2 0 0en
/dev/sda3 /home/commun ext4 defaults 0 2Puis
sudo update-grub
C'est fait. Voici le résultat d'update-grub, sans surprise (et tu as la confirmation de ma double distrib) :
francis@g:/etc$ sudo update-grub
Création du fichier de configuration GRUB…
using custom appearance settings
Found background image: /boot/grub/splash/1280-EyesOnLinux.jpg
Image Linux trouvée : /boot/vmlinuz-3.13.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-45-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-44-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-44-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-32-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Ubuntu 10.04.4 LTS (10.04) trouvé sur /dev/sda1
fait
francis@g:/etc$ Aller, je file au taff. A ce soir.
Dernière modification par fgi (Le 20/02/2015, à 08:48)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#10 Le 20/02/2015, à 23:22
- fgi
Re : [Résolu]Temps de boot 14.04
Bon, j'ai re-chronomètré, entre le grub et l'écran de login, j'en suis toujours à 2:40 ...
Grace à toi j'assainis progressivement ma config, mais je ne comprends toujours pas ce qui est si long ...
Voilà le dmesg du soir.
francis@g:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-7168, BIOS 080012 05/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[ 0.000000] [mem 0x7fe00000-0x7ffcffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff]
[ 0.000000] ACPI: RSDP 00000000000f9070 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffd0000 000038 (v01 A M I OEMRSDT 05000504 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffd0200 000084 (v02 A M I OEMFACP 05000504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffd0430 0037BD (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffde000 000040
[ 0.000000] ACPI: APIC 000000007ffd0390 000054 (v01 A M I OEMAPIC 05000504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffd03f0 00003C (v01 A M I OEMMCFG 05000504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffd3bf0 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 000000007ffde040 000056 (v01 A M I AMI_OEM 05000504 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
[ 0.000000] NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520144 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82368 r8192 d24128 u2097152
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 91c8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028288K/2096568K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 68280K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.805 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.61 BogoMIPS (lpj=8755220)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004078] AppArmor: AppArmor initialized
[ 0.004079] Yama: becoming mindful.
[ 0.004381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009293] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010064] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010071] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010395] Initializing cgroup subsys memory
[ 0.010407] Initializing cgroup subsys devices
[ 0.010409] Initializing cgroup subsys freezer
[ 0.010412] Initializing cgroup subsys blkio
[ 0.010414] Initializing cgroup subsys perf_event
[ 0.010417] Initializing cgroup subsys hugetlb
[ 0.010442] tseg: 0000000000
[ 0.010450] mce: CPU supports 5 MCE banks
[ 0.010460] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010460] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010460] tlb_flushall_shift: 4
[ 0.019361] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.020349] ACPI: Core revision 20131115
[ 0.022239] ACPI: All ACPI Tables successfully acquired
[ 0.022514] ftrace: allocating 28554 entries in 112 pages
[ 0.032571] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.074414] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 2f, stepping: 00)
[ 0.076000] Performance Events: AMD PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 48
[ 0.076000] ... generic registers: 4
[ 0.076000] ... value mask: 0000ffffffffffff
[ 0.076000] ... max period: 00007fffffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000000000f
[ 0.076000] x86: Booted up 1 node, 1 CPUs
[ 0.076000] smpboot: Total of 1 processors activated (4377.61 BogoMIPS)
[ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] devtmpfs: initialized
[ 0.079061] EVM: security.selinux
[ 0.079063] EVM: security.SMACK64
[ 0.079064] EVM: security.ima
[ 0.079065] EVM: security.capability
[ 0.079146] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.080700] pinctrl core: initialized pinctrl subsystem
[ 0.080794] regulator-dummy: no parameters
[ 0.080837] RTC time: 21:06:51, date: 02/20/15
[ 0.080889] NET: Registered protocol family 16
[ 0.081062] cpuidle: using governor ladder
[ 0.081065] cpuidle: using governor menu
[ 0.081071] node 0 link 0: io port [1000, ffffff]
[ 0.081074] TOM: 0000000080000000 aka 2048M
[ 0.081078] node 0 link 0: mmio [e0000000, efffffff]
[ 0.081081] node 0 link 0: mmio [80000000, dfffffff]
[ 0.081083] node 0 link 0: mmio [a0000, bffff]
[ 0.081086] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.081089] bus: [bus 00-ff] on node 0 link 0
[ 0.081091] bus: 00 [io 0x0000-0xffff]
[ 0.081093] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.081094] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.081148] ACPI: bus type PCI registered
[ 0.081150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.081225] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081228] PCI: not using MMCONFIG
[ 0.081230] PCI: Using configuration type 1 for base access
[ 0.082460] bio: create slab <bio-0> at 0
[ 0.082636] ACPI: Added _OSI(Module Device)
[ 0.082638] ACPI: Added _OSI(Processor Device)
[ 0.082640] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082642] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084045] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.085633] ACPI: Interpreter enabled
[ 0.085640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.085645] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.085660] ACPI: (supports S0 S3 S4 S5)
[ 0.085662] ACPI: Using IOAPIC for interrupt routing
[ 0.085747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.086939] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.096300] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.096448] ACPI: No dock devices found.
[ 0.102040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.102048] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.102056] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.102177] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.102180] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.102182] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.102185] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.102187] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.102190] PCI: root bus 00: hardware-probed resources
[ 0.102406] PCI host bridge to bus 0000:00
[ 0.102410] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.102412] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.102415] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.102418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.102426] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.102522] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.102558] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.102609] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.102679] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
[ 0.102706] pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.102720] pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
[ 0.102733] pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
[ 0.102746] pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.102759] pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
[ 0.102772] pci 0000:00:11.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[ 0.102786] pci 0000:00:11.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.102839] pci 0000:00:11.0: supports D1 D2
[ 0.102928] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
[ 0.102954] pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
[ 0.102968] pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
[ 0.102981] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.102994] pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
[ 0.103007] pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
[ 0.103020] pci 0000:00:12.0: reg 0x24: [mem 0xfebff800-0xfebff9ff]
[ 0.103034] pci 0000:00:12.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.103087] pci 0000:00:12.0: supports D1 D2
[ 0.103172] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.103196] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.103346] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.103393] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.103417] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.103567] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.103616] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.103643] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.103761] pci 0000:00:13.2: supports D1 D2
[ 0.103764] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.103819] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.103870] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.103891] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.103905] pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
[ 0.103963] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.104088] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.104111] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.104124] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.104138] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.104151] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.104164] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.104303] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.104467] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.104556] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.104600] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.104624] pci 0000:00:14.5: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.104773] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.104814] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.104892] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.104968] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.105042] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.105174] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.105186] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.105197] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.105208] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.105222] pci 0000:01:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 0.105290] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.105297] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.105303] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.105306] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.105357] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.105386] pci 0000:02:03.0: reg 0x10: [io 0x8800-0x88ff]
[ 0.105402] pci 0000:02:03.0: reg 0x14: [mem 0xfe8fe400-0xfe8fe4ff]
[ 0.105471] pci 0000:02:03.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.105519] pci 0000:02:03.0: supports D1 D2
[ 0.105521] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.105584] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.105614] pci 0000:02:04.0: reg 0x10: [mem 0xfe8fd800-0xfe8fdfff]
[ 0.105631] pci 0000:02:04.0: reg 0x14: [io 0x8c00-0x8c7f]
[ 0.105750] pci 0000:02:04.0: supports D2
[ 0.105752] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.105860] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.105869] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.105874] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.105880] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.105883] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.105885] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.106529] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106707] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106823] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.106878] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.106936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107021] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.107047] Found 1 acpi root devices
[ 0.107193] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.107195] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.107197] vgaarb: loaded
[ 0.107199] vgaarb: bridge control possible 0000:01:00.0
[ 0.107429] SCSI subsystem initialized
[ 0.107501] libata version 3.00 loaded.
[ 0.107529] ACPI: bus type USB registered
[ 0.107553] usbcore: registered new interface driver usbfs
[ 0.107563] usbcore: registered new interface driver hub
[ 0.107593] usbcore: registered new device driver usb
[ 0.107709] PCI: Using ACPI for IRQ routing
[ 0.119729] PCI: pci_cache_line_size set to 64 bytes
[ 0.119793] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.119796] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.119906] NetLabel: Initializing
[ 0.119907] NetLabel: domain hash size = 128
[ 0.119908] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.119925] NetLabel: unlabeled traffic allowed by default
[ 0.120049] Switched to clocksource refined-jiffies
[ 0.128617] AppArmor: AppArmor Filesystem Enabled
[ 0.128658] pnp: PnP ACPI init
[ 0.128676] ACPI: bus type PNP registered
[ 0.128749] pnp 00:00: [dma 4]
[ 0.128782] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.128824] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.128854] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.128883] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129454] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.129457] system 00:04: [io 0x040b] has been reserved
[ 0.129460] system 00:04: [io 0x04d6] has been reserved
[ 0.129462] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.129465] system 00:04: [io 0x0c14] has been reserved
[ 0.129468] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.129470] system 00:04: [io 0x0c52] has been reserved
[ 0.129473] system 00:04: [io 0x0c6c] has been reserved
[ 0.129476] system 00:04: [io 0x0c6f] has been reserved
[ 0.129478] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.129481] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.129484] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.129487] system 00:04: [io 0x0800-0x089f] could not be reserved
[ 0.129489] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.129492] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.129496] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.129500] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129560] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.129667] system 00:06: [io 0x0e00-0x0e7f] has been reserved
[ 0.129671] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129748] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.129752] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.129755] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129820] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.129824] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129978] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.129982] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.129985] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.129988] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.129991] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130110] pnp: PnP ACPI: found 10 devices
[ 0.130111] ACPI: bus type PNP unregistered
[ 0.136280] Switched to clocksource acpi_pm
[ 0.136316] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 0.136324] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.136328] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.136331] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.136336] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.136340] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.136347] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.136359] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.136361] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136364] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136367] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
[ 0.136369] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.136372] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.136374] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.136377] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.136379] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136382] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136429] NET: Registered protocol family 2
[ 0.136705] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.136816] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.136952] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.137030] TCP: reno registered
[ 0.137036] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137070] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137189] NET: Registered protocol family 1
[ 0.137204] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.292168] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.292179] PCI: CLS 64 bytes, default 64
[ 0.292262] Trying to unpack rootfs image as initramfs...
[ 0.711178] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000)
[ 0.711581] microcode: AMD CPU family 0xf not supported
[ 0.711584] Scanning for low memory corruption every 60 seconds
[ 0.711871] Initialise system trusted keyring
[ 0.711938] audit: initializing netlink socket (disabled)
[ 0.711954] type=2000 audit(1424466411.707:1): initialized
[ 0.744104] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.745508] zbud: loaded
[ 0.745679] VFS: Disk quotas dquot_6.5.2
[ 0.745738] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.746339] fuse init (API version 7.22)
[ 0.746427] msgmni has been set to 3998
[ 0.746495] Key type big_key registered
[ 0.746830] Key type asymmetric registered
[ 0.746832] Asymmetric key parser 'x509' registered
[ 0.746870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.746908] io scheduler noop registered
[ 0.746910] io scheduler deadline registered (default)
[ 0.746939] io scheduler cfq registered
[ 0.747077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.747098] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.747142] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.747144] vesafb: scrolling: redraw
[ 0.747146] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.747347] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.805121] Console: switching to colour frame buffer device 160x64
[ 0.862832] fb0: VESA VGA frame buffer device
[ 0.862878] ipmi message handler version 39.2
[ 0.862952] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.862958] ACPI: Power Button [PWRB]
[ 0.863000] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.863003] ACPI: Power Button [PWRF]
[ 0.863040] ACPI: duty_cycle spans bit 4
[ 0.863127] GHES: HEST is not enabled!
[ 0.863216] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.864622] Linux agpgart interface v0.103
[ 0.864744] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.864773] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.864776] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.864800] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.864802] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.866343] brd: module loaded
[ 0.867201] loop: module loaded
[ 0.867710] libphy: Fixed MDIO Bus: probed
[ 0.867822] tun: Universal TUN/TAP device driver, 1.6
[ 0.867824] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.867869] PPP generic driver version 2.4.2
[ 0.867912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.867917] ehci-pci: EHCI PCI platform driver
[ 0.868060] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.868068] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.868143] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 0.880021] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.880117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880122] usb usb1: Product: EHCI Host Controller
[ 0.880125] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 0.880127] usb usb1: SerialNumber: 0000:00:13.2
[ 0.880246] hub 1-0:1.0: USB hub found
[ 0.880256] hub 1-0:1.0: 8 ports detected
[ 0.880465] ehci-platform: EHCI generic platform driver
[ 0.880478] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.880480] ohci-pci: OHCI PCI platform driver
[ 0.880556] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.880562] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.880580] ohci-pci 0000:00:13.0: irq 19, io mem 0xfebfe000
[ 0.940064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.940067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940069] usb usb2: Product: OHCI PCI host controller
[ 0.940072] usb usb2: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 0.940074] usb usb2: SerialNumber: 0000:00:13.0
[ 0.940172] hub 2-0:1.0: USB hub found
[ 0.940184] hub 2-0:1.0: 4 ports detected
[ 0.940339] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.940348] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.940365] ohci-pci 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 1.000060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.000063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000065] usb usb3: Product: OHCI PCI host controller
[ 1.000067] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 1.000069] usb usb3: SerialNumber: 0000:00:13.1
[ 1.000186] hub 3-0:1.0: USB hub found
[ 1.000199] hub 3-0:1.0: 4 ports detected
[ 1.000304] ohci-platform: OHCI generic platform driver
[ 1.000315] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000392] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.000394] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.001174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.001276] mousedev: PS/2 mouse device common for all mice
[ 1.001396] rtc_cmos 00:01: RTC can wake from S4
[ 1.001543] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.001572] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.001655] device-mapper: uevent: version 1.0.3
[ 1.001726] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.001733] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.001863] TCP: cubic registered
[ 1.001971] NET: Registered protocol family 10
[ 1.002200] NET: Registered protocol family 17
[ 1.002211] Key type dns_resolver registered
[ 1.002424] Loading compiled-in X.509 certificates
[ 1.003671] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.003686] registered taskstats version 1
[ 1.006550] Key type trusted registered
[ 1.009095] Key type encrypted registered
[ 1.011601] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.011607] IMA: No TPM chip found, activating TPM-bypass!
[ 1.011871] regulator-dummy: disabling
[ 1.011921] Magic number: 3:770:146
[ 1.011934] hub 1-0:1.0: hash matches
[ 1.011985] acpi device:17: hash matches
[ 1.012063] rtc_cmos 00:01: setting system clock to 2015-02-20 21:06:52 UTC (1424466412)
[ 1.012264] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 1.012266] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.012268] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.012269] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.012295] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 1.012303] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.012304] EDD information not available.
[ 1.012336] PM: Hibernation image not present or could not be loaded.
[ 1.014610] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.014615] Write protecting the kernel read-only data: 12288k
[ 1.017930] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.020891] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.029053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.040374] systemd-udevd[90]: starting version 204
[ 1.067933] sata_sil 0000:00:11.0: version 2.4
[ 1.084520] scsi0 : sata_sil
[ 1.087117] scsi1 : sata_sil
[ 1.087195] ata1: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffc80 irq 23
[ 1.087199] ata2: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffcc0 irq 23
[ 1.090270] scsi2 : sata_sil
[ 1.093052] scsi3 : sata_sil
[ 1.093113] ata3: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff880 irq 22
[ 1.093117] ata4: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff8c0 irq 22
[ 1.099199] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.099227] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.102670] scsi4 : pata_atiixp
[ 1.107364] scsi5 : pata_atiixp
[ 1.107428] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.107431] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.109150] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.110428] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0000000000018800, 00:11:09:19:9c:15, IRQ 20
[ 1.188072] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.280582] ata6.00: ATAPI: LITE-ON DVDRW SOHW-1633S, B9S5, max UDMA/66
[ 1.296523] ata6.00: configured for UDMA/66
[ 1.404056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412044] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.412547] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 1.412550] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.428516] ata1.00: configured for UDMA/100
[ 1.428647] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 1.428894] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.428962] sd 0:0:0:0: [sda] Write Protect is off
[ 1.428966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.428995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.429192] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.448044] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 1.456166] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.456597] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.658070] usb 3-2: New USB device found, idVendor=047d, idProduct=1020
[ 1.658076] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.658079] usb 3-2: Product: Kensington Expert Mouse
[ 1.658081] usb 3-2: Manufacturer: Kensington
[ 1.664839] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.671612] usbcore: registered new interface driver usbhid
[ 1.671617] usbhid: USB HID core driver
[ 1.674477] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[ 1.675344] hid-generic 0003:047D:1020.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:13.1-2/input0
[ 1.688109] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000096798a, S400
[ 1.708031] tsc: Refined TSC clocksource calibration: 2188.787 MHz
[ 1.748044] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.068046] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.068973] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S B9S5 PQ: 0 ANSI: 5
[ 2.071245] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.071248] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.071367] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.071519] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.106034] EXT4-fs (sda4): INFO: recovery required on readonly filesystem
[ 2.106040] EXT4-fs (sda4): write access will be enabled during recovery
[ 2.708072] Switched to clocksource tsc
[ 4.143218] random: nonblocking pool is initialized
[ 19.405940] EXT4-fs (sda4): recovery complete
[ 19.422490] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 89.047004] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 89.132745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 89.424070] systemd-udevd[268]: starting version 204
[ 89.677461] lp: driver loaded but no devices found
[ 89.704563] ppdev: user-space parallel port driver
[ 89.904852] [drm] Initialized drm 1.1.0 20060810
[ 89.952285] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 89.979338] MCE: In-kernel MCE decoding enabled.
[ 90.002330] EDAC MC: Ver: 3.0.0
[ 90.027105] AMD64 EDAC driver v3.4.0
[ 90.027155] EDAC amd64: DRAM ECC enabled.
[ 90.027160] EDAC amd64: K8 revE or earlier detected (node 0).
[ 90.027202] EDAC amd64: CS0: Double data rate SDRAM
[ 90.027203] EDAC amd64: CS2: Double data rate SDRAM
[ 90.027205] EDAC amd64: CS3: Double data rate SDRAM
[ 90.030795] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 90.059269] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 90.087901] wmi: Mapper loaded
[ 90.236703] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 90.236708] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 90.236738] Console: switching to colour dummy device 80x25
[ 90.253329] [drm] hdmi device not found 1 0 1
[ 90.253406] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x044200a2
[ 90.253410] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44 (NV44)
[ 90.253412] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 90.254015] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 90.343838] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 90.343841] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 90.344032] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 90.344036] nouveau [ VBIOS][0000:01:00.0] version 05.44.02.24.00
[ 90.346220] type=1400 audit(1424466501.829:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=328 comm="apparmor_parser"
[ 90.346231] type=1400 audit(1424466501.829:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
[ 90.346236] type=1400 audit(1424466501.829:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
[ 90.346857] type=1400 audit(1424466501.829:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
[ 90.346864] type=1400 audit(1424466501.829:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
[ 90.347189] type=1400 audit(1424466501.829:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
[ 90.415650] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 90.415652] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 90.415653] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 91.079101] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 91.079116] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 91.079120] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 91.128223] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 500 MHz
[ 91.128238] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz
[ 91.128348] [TTM] Zone kernel: Available graphics memory: 1024950 kiB
[ 91.128350] [TTM] Initializing pool allocator
[ 91.128356] [TTM] Initializing DMA pool allocator
[ 91.128370] nouveau [ DRM] VRAM: 60 MiB
[ 91.128372] nouveau [ DRM] GART: 512 MiB
[ 91.128378] nouveau [ DRM] TMDS table version 1.1
[ 91.128380] nouveau [ DRM] DCB version 3.0
[ 91.128383] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 91.128387] nouveau [ DRM] DCB outp 01: 01011312 00000020
[ 91.128389] nouveau [ DRM] DCB outp 02: 020223f1 0000c033
[ 91.128392] nouveau [ DRM] DCB conn 00: 0000
[ 91.128394] nouveau [ DRM] DCB conn 01: 2130
[ 91.128397] nouveau [ DRM] DCB conn 02: 0210
[ 91.128399] nouveau [ DRM] DCB conn 03: 0211
[ 91.128401] nouveau [ DRM] DCB conn 04: 0213
[ 91.131251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 91.131254] [drm] No driver support for vblank timestamp query.
[ 91.131305] nouveau [ DRM] 0xD1F3: Parsing digital output script table
[ 91.186380] nouveau [ DRM] MM: using M2MF for buffer copies
[ 91.186392] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
[ 91.243396] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 91.253583] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff880036814000
[ 91.254190] fbcon: nouveaufb (fb0) is primary device
[ 91.288146] Console: switching to colour frame buffer device 160x64
[ 91.290194] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 91.290197] nouveau 0000:01:00.0: registered panic notifier
[ 91.290203] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 97.831210] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 98.285136] init: failsafe main process (572) killed by TERM signal
[ 99.051936] type=1400 audit(1424466510.533:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=684 comm="apparmor_parser"
[ 99.051946] type=1400 audit(1424466510.533:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=684 comm="apparmor_parser"
[ 99.055996] type=1400 audit(1424466510.537:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=684 comm="apparmor_parser"
[ 99.226117] type=1400 audit(1424466510.709:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=732 comm="apparmor_parser"
[ 99.226129] type=1400 audit(1424466510.709:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=732 comm="apparmor_parser"
[ 99.226523] type=1400 audit(1424466510.709:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=732 comm="apparmor_parser"
[ 99.233642] type=1400 audit(1424466510.717:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[ 99.233655] type=1400 audit(1424466510.717:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[ 99.233661] type=1400 audit(1424466510.717:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[ 99.234287] type=1400 audit(1424466510.717:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[ 99.692133] Bluetooth: Core ver 2.17
[ 99.692171] NET: Registered protocol family 31
[ 99.692173] Bluetooth: HCI device and connection manager initialized
[ 99.692733] Bluetooth: HCI socket layer initialized
[ 99.692739] Bluetooth: L2CAP socket layer initialized
[ 99.692746] Bluetooth: SCO socket layer initialized
[ 99.742665] Bluetooth: RFCOMM TTY layer initialized
[ 99.742682] Bluetooth: RFCOMM socket layer initialized
[ 99.742693] Bluetooth: RFCOMM ver 1.11
[ 99.772054] init: cups main process (693) killed by HUP signal
[ 99.772071] init: cups main process ended, respawning
[ 99.809369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 99.809376] Bluetooth: BNEP filters: protocol multicast
[ 99.809387] Bluetooth: BNEP socket layer initialized
[ 103.781788] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 142.673705] audit_printk_skb: 87 callbacks suppressed
[ 142.673711] type=1400 audit(1424466555.306:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2355 comm="apparmor_parser"
[ 142.673721] type=1400 audit(1424466555.306:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2355 comm="apparmor_parser"
[ 142.674336] type=1400 audit(1424466555.306:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2355 comm="apparmor_parser"
[ 151.567127] init: plymouth-upstart-bridge main process (155) killed by TERM signal
[ 187.260227] tsc: Marking TSC unstable due to cpufreq changes
[ 187.260530] Switched to clocksource acpi_pm
francis@g:~$ Il y a manifestement un truc lors du montage des disques :
[ 2.708072] Switched to clocksource tsc
[ 4.143218] random: nonblocking pool is initialized
[ 19.405940] EXT4-fs (sda4): recovery complete
[ 19.422490] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 89.047004] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 89.132745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 91.290194] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 91.290197] nouveau 0000:01:00.0: registered panic notifier
[ 91.290203] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 97.831210] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 98.285136] init: failsafe main process (572) killed by TERM signal
[ 99.051936] type=1400 audit(1424466510.533:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=684 comm="apparmor_parseet puis une phase étrange tout à la fin :
[ 99.809387] Bluetooth: BNEP socket layer initialized
[ 103.781788] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 142.673705] audit_printk_skb: 87 callbacks suppressed
[ 142.673711] type=1400 audit(1424466555.306:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2355 comm="apparmor_pQu'est-ce que c'est : "type=1400 audit(...)" ? à chaque fois, j'y perds du temps.
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#11 Le 21/02/2015, à 18:09
- moko138
Re : [Résolu]Temps de boot 14.04
Bon, je t'explique où nous allons :
1) Il ressort de ton message #7 (ls -la ... .xsession) que chaque personne a deux comptes : un dans /home (sda4) et un dans /home/commun (sda3). Donc ton système est dans le brouillard à chaque démarrage. Toi, tu trouves le démarrage "long", moi je suis épaté que chacun puisse accéder à son compte.
Cela, il faut le changer.
Pour l'instant, je crois qu'une réinstallation sera le plus rapide.
2) L'état de ton disque
S'il est moribond, pas la peine de continuer dessus. Donc on va activer la collecte des données (cf. la toute fin de ton #4).
= = = = =
sudo apt-get install ncduTu te récupères la liste des paquets, comme aide à la réinstallation :
dpkg --get-selections > /home/commun/francis/liste-des-paquets-20150221.txtEt donne les retours de
sudo smartctl -s on -o on -S on /dev/sdasudo service smartmontools restartdf -hncdu /home/communncdu -x /homeflèche droite pour déployer le résultat des ncdu s'il s'affiche condensé en une demi-ligne au lieu d'un tableau.
Bien entendu, s'il y a des noms confidentiels ou, disons... caribéens, tu les changes. Mais tu laisses les tailles !
Quand cela sera fait, refais
sudo smartctl -a /dev/sdamais ne donne le résultat que s'il inclut le tableau.
Sinon redémarre le pc pour passer la commande ! Parce que
le disque continue à gratter et que j'ai difficilement la main pendant encore une dizaine de secondes. (...)
Packard Bell de 2005
et si ton disque se révèle usé, la première chose à faire est la sauvegarde des données sur un DDE ; la seconde est le remplacement du disque.
= = = = =
N.B.1 : éteins ton imprimante avant de démarrer.
Tu dois avoir dans /home/francis/.config/*/autostart (ou peut-être dans /home/commun/francis/.config/*/autostart, vu les doublons) un appel aux services d'impression et bluetooth et peut-être à d'autres services, qui retardent aussi ton démarrage.
N.B.2 : c'est en root que tu avais passé les commandes en live ("root@ubuntu" et non "ubuntu@ubuntu"). Évite à chaque fois que possible d'agir en root. Parce que tout fichier ou répertoire déplacé ou modifié en root devient propriété de root, et que pour rétablir ensuite les bons propriétaires et droits, eh bien... pour les données, c'est long, et pour le système, c'est infaisable...
N.B.3 : Ton idée de mettre les données sur une partition séparée était excellente, mais il faut :
soit appeler cette partition "/home", et le faire dès l'installation (à l'étape n°3, en choisissant "autre chose") ;
soit appeler cette partition comme tu veux mais surtout pas "/home/quelquechose" ; c'est cela qui crée les doublons foutoiresques. Tu peux créer /Donnees ou /Commun (nom sans accent ni espace), directement à la racine, pendant l'étape 3 de l'installation ou peu après. Et dedans tu créeras ultérieurement un répertoire partagé et un répertoire par compte, avec les propriétés et droits de chacun.
Chez moi, j'ai choisi cette dernière solution, mon /home est ainsi minuscule, donc placé dans la partition /, et les données, comme celles de ta famille, sont dans une partition propre mais qui, elle, ne contient aucun fichier de configuration. Ce qui permet de la partager entre plusieurs systèmes, et aussi d'installer ou réinstaller sans souci.
Dernière modification par moko138 (Le 21/02/2015, à 19:25)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 21/02/2015, à 22:19
- fgi
Re : [Résolu]Temps de boot 14.04
Ok, je vais dérouler les 1eres étapes de ton post et je reviens avec les résultats.
D'ici là, quelques éléments de compréhension , afin d'être sûr qu'on est bien en phase sur ma config (et son histoire ...) ;-)
moko138 a écrit :
Bon, je t'explique où nous allons :
1) Il ressort de ton message #7 (ls -la ... .xsession) que chaque personne a deux comptes : un dans /home (sda4) et un dans /home/commun (sda3).
Si tu regardes mon post #7, tu verras que les *xsession qui sont sur /home/commun/* datent de 2012. Pour moi, ce sont des reliquats qui doivent être nettoyés, tout bêtement. Je me propose de le faire, là, maintenant, histoire de clarifier le paysage. Sauf si tu préfères qu'on ne cumule pas trop de modifs ?
moko138 a écrit :
N.B.1 : éteins ton imprimante avant de démarrer.
Tu dois avoir dans /home/francis/.config/*/autostart (ou peut-être dans /home/commun/francis/.config/*/autostart, vu les doublons) un appel aux services d'impression et bluetooth et peut-être à d'autres services, qui retardent aussi ton démarrage.
Mon imprimante est toujours éteinte, ce qui n'empêche pas le chargement de CUPS et des drivers ;-)
Je ne trouve rien sur l'imprimante coté autostart :
francis@g:~/.config$ ls -la autostart
total 16
drwxrwxr-x 2 francis francis 4096 déc. 29 22:36 .
drwx------ 24 francis francis 4096 févr. 1 14:34 ..
-rw-rw-r-- 1 francis francis 29 déc. 29 22:36 blueman.desktop
-rw-rw-r-- 1 francis francis 235 févr. 21 20:34 dropbox.desktop
francis@g:~/.config$ Ca ne serait pas dans /etc/init.d ?
moko138 a écrit :
N.B.2 : c'est en root que tu avais passé les commandes en live ("root@ubuntu" et non "ubuntu@ubuntu"). Évite à chaque fois que possible d'agir en root. Parce que tout fichier ou répertoire déplacé ou modifié en root devient propriété de root, et que pour rétablir ensuite les bons propriétaires et droits, eh bien... pour les données, c'est long, et pour le système, c'est infaisable...
Yes, je n'y ai pas fait attention ... Je ne crois pas avoir déplacé des fichiers depuis la live, mais ok, je vais être vigilant. A noter que j'avais démarré avec ma live USB 10.04 ... la prochaine fois je prendrais la 1404, ça sera plius intelligent 
moko138 a écrit :
N.B.3 : Ton idée de mettre les données sur une partition séparée était excellente, mais il faut :
[...]
Tu peux créer /Donnees ou /Commun (nom sans accent ni espace), directement à la racine, pendant l'étape 3 de l'installation ou peu après. Et dedans tu créeras ultérieurement un répertoire partagé et un répertoire par compte, avec les propriétés et droits de chacun.
Chez moi, j'ai choisi cette dernière solution, mon /home est ainsi minuscule, donc placé dans la partition /, et les données, comme celles de ta famille, sont dans une partition propre mais qui, elle, ne contient aucun fichier de configuration. Ce qui permet de la partager entre plusieurs systèmes, et aussi d'installer ou réinstaller sans souci.
Là j'ai besoin d'éclaircir un peu :
- J'ai mon sda4 avec les données.
- J'ai mon sda3/home avec mes répertoires par profil (/home/francis). J'y ai créé un /home/commun sur lequel je monte mon sda4. Je pensais que c'était la bonne façon de faire.
Si je comprends bien, ta préco est de monter directement mon sda4 sur sda3/home, et d'y mettre mes répertoires par profil ?
==> OK, mais alors, comment se fait-il que
moko138 a écrit :
elle, ne contient aucun fichier de configuration.
De ma compréhension, les fichiers de config (pour chaque user) sont dans son répertoire de profil, et donc si je place celui-si sur mon sda4, les fichiers de config viennent nécessairement avec.
Du coup, si tu bootes avec une autre distrib, elle va utiliser les même fichiers de config, et donc si les 2 distrib ont des configs différentes, tu vas avoir des conflits ...
C'est ce que j'avais voulu éviter à l'époque où j'étais en double boot 10.04 / 12.04 : chaque distrib avait, sur sa partition, un /home/<profil> avec tous les fichiers de conf, et j'avais positionné sur /home/commun/<profil> (donc, physiquement, sur sda4/<profil>), les sous-répertoires de chacun : Données, Téléchargements, Musique, etc... Et pour couronner le tout, j'avais, dans chaque fichier /home/<profil>/.config/user-dirs.dirs, changé les variables d'environnement pour aller pointer vers les dossiers correspondants de /home/commun/<profil>/
(Au passage, j'ai eu des effets secondaires, par exemple sur la gestion des corbeilles, que je n'ai jamais éclaircis ... )
Cela dit, tout ceci est pour ma bonne compréhension, parce que pour l'instant, je vais rester sur une seule distrib ;-)
Aller, je me mets au taff pour dérouler les étapes que tu m'as données, et je poste les résultats dans quelques heures ...
Dernière modification par fgi (Le 22/02/2015, à 01:28)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#13 Le 21/02/2015, à 22:54
- fgi
Re : [Résolu]Temps de boot 14.04
francis@g:~$ sudo smartctl -s on -o on -S on /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-45-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Enable Automatic Offline failed: scsi error aborted command
francis@g:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda4 24G 13G 9,3G 59% /
none 4,0K 0 4,0K 0% /sys/fs/cgroup
udev 991M 12K 991M 1% /dev
tmpfs 201M 952K 200M 1% /run
none 5,0M 0 5,0M 0% /run/lock
none 1001M 80K 1001M 1% /run/shm
none 100M 36K 100M 1% /run/user
/dev/sda3 128G 72G 50G 60% /home/commun
francis@g:~$ Pour le ncdu /home/commun :
--- /home/commun ----------------------------------------------------------------------------------------------------------------------------------------------------
54,8GiB [##########] /commun
. 4,3GiB [ ] /francis
. 2,0GiB [ ] /alexia
. 753,8MiB [ ] /sandrine
. 277,2MiB [ ] /auriane
. 257,2MiB [ ] /romain
! 16,0KiB [ ] /lost+found
e 4,0KiB [ ] /Trash
! 4,0KiB [ ] /.Trash-0
--- /home/commun/commun ---------------------------------------------------------------------------------------------------------------------------------------------
/..
30,9GiB [##########] /Mes images
12,9GiB [#### ] /Mes vidéos
10,9GiB [### ] /Ma musique
161,2MiB [ ] /Documents divers
e 4,0KiB [ ] /Telechargements
--- /home/commun/francis -----------------------------------------------------------------------------------------------------------------------------------------------------------
/..
1,9GiB [##########] /Téléchargements
1,3GiB [###### ] /.wine
297,4MiB [# ] /Dropbox
166,3MiB [ ] /.mozilla
158,1MiB [ ] /.cache
146,5MiB [ ] /.local
146,5MiB [ ] /XMind
30,0MiB [ ] /kdenlive
27,7MiB [ ] out.ogv
26,7MiB [ ] /.thumbnails
22,4MiB [ ] /.openoffice.org
18,5MiB [ ] /.config
9,2MiB [ ] /.opera
7,9MiB [ ] /.aMule
6,9MiB [ ] /.adobe
3,6MiB [ ] /.macromedia
2,1MiB [ ] /.gconf
1,5MiB [ ] /.gstreamer-0.10
1,4MiB [ ] /.icedteaplugin
1,0MiB [ ] /.Skype
796,0KiB [ ] /.fontconfig
788,0KiB [ ] /.compiz-1
516,0KiB [ ] /.kde
460,0KiB [ ] /.gimp-2.6
332,0KiB [ ] /.pulse
320,0KiB [ ] /.evolution
296,0KiB [ ] /.picasa
192,0KiB [ ] .usbcreator.log
184,0KiB [ ] /.gnome2
156,0KiB [ ] .ICEauthority
156,0KiB [ ] /.torcs
68,0KiB [ ] /.gconfd
52,0KiB [ ] liste-des-paquets-20150221.txt
. 48,0KiB [ ] /Documents
40,0KiB [ ] /.audacity-data
40,0KiB [ ] /.winff
40,0KiB [ ] /.filezilla
36,0KiB [ ] /.sane
36,0KiB [ ] /.dbus
32,0KiB [ ] /.dvdcss
32,0KiB [ ] /.xine
28,0KiB [ ] /.TaoUSign
28,0KiB [ ] /.easytag
20,0KiB [ ] .recently-used
20,0KiB [ ] /.gnupg
16,0KiB [ ] /.gegl-0.0
12,0KiB [ ] /eMule Downloads
12,0KiB [ ] /.avidemux
12,0KiB [ ] /.update-manager-core
12,0KiB [ ] /.cddbslave
12,0KiB [ ] /.netx
12,0KiB [ ] .bash_history
12,0KiB [ ] /.mission-control
12,0KiB [ ] /.icedtea
8,0KiB [ ] /.compiz
8,0KiB [ ] .xnviewrc
8,0KiB [ ] .xsession-errors
8,0KiB [ ] /.TrueCrypt
8,0KiB [ ] /.mp3splt-gtk
8,0KiB [ ] .xsession-errors.old
8,0KiB [ ] /.qt
8,0KiB [ ] /Bureau
8,0KiB [ ] /.hplip
4,0KiB [ ] /Ubuntu One
4,0KiB [ ] /.themes
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /PDF
e 4,0KiB [ ] /My Games
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
e 4,0KiB [ ] /Images
e 4,0KiB [ ] /.wapi
e 4,0KiB [ ] /.update-notifier
e 4,0KiB [ ] /.ssh
e 4,0KiB [ ] /.icons
e 4,0KiB [ ] /.hardinfo
e 4,0KiB [ ] /.gvfs
e 4,0KiB [ ] /.gopchop
e 4,0KiB [ ] /.gnome2_private
e 4,0KiB [ ] /.debtags
4,0KiB [ ] /.aptitude
4,0KiB [ ] .bashrc
4,0KiB [ ] .face
4,0KiB [ ] .BOINC Manager
4,0KiB [ ] audio.cdindex
4,0KiB [ ] .nvidia-settings-rc
4,0KiB [ ] audio.cddb
4,0KiB [ ] .profile
4,0KiB [ ] .xscreensaver-getimage.cache
4,0KiB [ ] .fonts.conf
4,0KiB [ ] .pulse-cookie
4,0KiB [ ] .registry
4,0KiB [ ] .bash_logout
4,0KiB [ ] .gtk-bookmarks.FW9P9V
4,0KiB [ ] .gtk-bookmarks
4,0KiB [ ] .png
4,0KiB [ ] examples.desktop
4,0KiB [ ] .hyperconf
4,0KiB [ ] .so_sane_state
4,0KiB [ ] .dmrc
4,0KiB [ ] .goutputstream-X0SKMW
4,0KiB [ ] .goutputstream-U51OMW
4,0KiB [ ] .goutputstream-9O2GMW
4,0KiB [ ] .goutputstream-2XDMMW
4,0KiB [ ] .Xauthority
4,0KiB [ ] .printer-groups.xml
4,0KiB [ ] .esd_auth
4,0KiB [ ] .gnomerc
4,0KiB [ ] .windows-label
0,0 B [ ] .sudo_as_admin_successful
0,0 B [ ] .goutputstream-UAENMW
0,0 B [ ] .goutputstream-G1YPMW
0,0 B [ ] .gksu.lock
--- /home/commun/alexia ------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
1,2GiB [##########] /Musique
. 693,9MiB [##### ] /Bureau
65,0MiB [ ] /Téléchargements
57,5MiB [ ] /.wine
2,1MiB [ ] /Images
1,0MiB [ ] /.gstreamer-0.10
972,0KiB [ ] /Documents
. 532,0KiB [ ] /.config
468,0KiB [ ] /.gimp-2.6
. 336,0KiB [ ] /.evolution
296,0KiB [ ] /.compiz-1
248,0KiB [ ] /.icedtea
156,0KiB [ ] /.torcs
92,0KiB [ ] .ICEauthority
32,0KiB [ ] .face
24,0KiB [ ] .recently-used
24,0KiB [ ] /.winff
20,0KiB [ ] /.fontconfig
16,0KiB [ ] .xsession-errors.old
12,0KiB [ ] /.netx
. 8,0KiB [ ] /.openoffice.org
8,0KiB [ ] .xsession-errors
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /Dropbox
! 4,0KiB [ ] /.update-notifier
! 4,0KiB [ ] /.thumbnails
e 4,0KiB [ ] /.themes
! 4,0KiB [ ] /.ssh
! 4,0KiB [ ] /.pulse
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.mission-control
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
! 4,0KiB [ ] /.kde
e 4,0KiB [ ] /.icons
! 4,0KiB [ ] /.icedteaplugin
! 4,0KiB [ ] /.gvfs
! 4,0KiB [ ] /.gnupg
! 4,0KiB [ ] /.gnome2_private
! 4,0KiB [ ] /.gnome2
! 4,0KiB [ ] /.gegl-0.0
! 4,0KiB [ ] /.gconfd
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dbus
! 4,0KiB [ ] /.compiz
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .bashrc
4,0KiB [ ] .profile
4,0KiB [ ] .bash_history
4,0KiB [ ] .gtk-bookmarks
4,0KiB [ ] .pulse-cookie
4,0KiB [ ] .registry
4,0KiB [ ] .bash_logout
4,0KiB [ ] .printer-groups.xml
4,0KiB [ ] .dmrc
4,0KiB [ ] .esd_auth
4,0KiB [ ] .gnomerc
0,0 B [ ] .gksu.lock
0,0 B [ ] .Xauthority
--- /home/commun/sandrine ----------------------------------------------------------------------------------------------------------------------------------------------------------
/..
643,7MiB [##########] /Téléchargements
70,2MiB [# ] /Documents
27,9MiB [ ] /Images
9,1MiB [ ] /Musique
2,8MiB [ ] /Bureau
. 44,0KiB [ ] /.local
44,0KiB [ ] /.compiz-1
20,0KiB [ ] .face
12,0KiB [ ] examples.desktop
8,0KiB [ ] .xsession-errors.old
8,0KiB [ ] /.fontconfig
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /Dropbox
! 4,0KiB [ ] /.thumbnails
! 4,0KiB [ ] /.pulse
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.mission-control
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.gvfs
! 4,0KiB [ ] /.gnome2_private
! 4,0KiB [ ] /.gnome2
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dbus
! 4,0KiB [ ] /.config
! 4,0KiB [ ] /.compiz
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .ICEauthority
4,0KiB [ ] .bashrc
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .profile
4,0KiB [ ] .pulse-cookie
4,0KiB [ ] .bash_logout
4,0KiB [ ] .gtk-bookmarks
4,0KiB [ ] .dmrc
0,0 B [ ] .goutputstream-RT3JMW
0,0 B [ ] .goutputstream-QNYUMW
0,0 B [ ] .Xauthority
--- /home/commun/auriane -----------------------------------------------------------------------------------------------------------------------------------------------------------
/..
264,4MiB [##########] /Téléchargements
7,7MiB [ ] /Documents
2,8MiB [ ] /Images
680,0KiB [ ] /.gstreamer-0.10
492,0KiB [ ] Firefox_wallpaper.png
460,0KiB [ ] /.gimp-2.6
216,0KiB [ ] /.compiz-1
108,0KiB [ ] /Bureau
. 84,0KiB [ ] /.config
64,0KiB [ ] .ICEauthority
40,0KiB [ ] /.evolution
20,0KiB [ ] dessin.odt
16,0KiB [ ] les ordres anglais-allemand.odt
12,0KiB [ ] /.fontconfig
. 8,0KiB [ ] /.openoffice.org
8,0KiB [ ] .xsession-errors
8,0KiB [ ] /.nautilus
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /.update-notifier
! 4,0KiB [ ] /.thumbnails
e 4,0KiB [ ] /.themes
! 4,0KiB [ ] /.ssh
! 4,0KiB [ ] /.pulse
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.mission-control
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
e 4,0KiB [ ] /.icons
! 4,0KiB [ ] /.icedteaplugin
! 4,0KiB [ ] /.gvfs
! 4,0KiB [ ] /.gnupg
! 4,0KiB [ ] /.gnome2_private
! 4,0KiB [ ] /.gnome2
! 4,0KiB [ ] /.gegl-0.0
! 4,0KiB [ ] /.gconfd
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dbus
! 4,0KiB [ ] /.compiz
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .face
4,0KiB [ ] .bashrc
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .recently-used
4,0KiB [ ] .profile
4,0KiB [ ] .pulse-cookie
4,0KiB [ ] .bash_logout
4,0KiB [ ] .gtk-bookmarks
4,0KiB [ ] examples.desktop
4,0KiB [ ] .dmrc
4,0KiB [ ] .esd_auth
4,0KiB [ ] .gnomerc
0,0 B [ ] .gksu.lock
0,0 B [ ] .Xauthority
--- /home/commun/romain ------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
164,7MiB [##########] /Téléchargements
64,1MiB [### ] /Documents
12,4MiB [ ] /Images
3,3MiB [ ] Firefox_wallpaper.png
2,4MiB [ ] DSCF1801.JPG
2,4MiB [ ] DSCF1804.JPG
1,4MiB [ ] P1010002.JPG
1,3MiB [ ] P1010004.JPG
1,3MiB [ ] P1010003.JPG
1,2MiB [ ] P1010001.JPG
684,0KiB [ ] peche.odt
680,0KiB [ ] /.gstreamer-0.10
. 388,0KiB [ ] /.config
356,0KiB [ ] /.compiz-1
. 228,0KiB [ ] /.local
200,0KiB [ ] .recently-used.xbel.515J6V
96,0KiB [ ] .ICEauthority
40,0KiB [ ] /.evolution
. 8,0KiB [ ] /.openoffice.org
8,0KiB [ ] /.fontconfig
8,0KiB [ ] .xsession-errors
8,0KiB [ ] .xsession-errors.old
8,0KiB [ ] .recently-used
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
e 4,0KiB [ ] /Bureau
! 4,0KiB [ ] /.update-notifier
! 4,0KiB [ ] /.thumbnails
e 4,0KiB [ ] /.themes
! 4,0KiB [ ] /.ssh
! 4,0KiB [ ] /.pulse
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.mission-control
! 4,0KiB [ ] /.macromedia
e 4,0KiB [ ] /.icons
! 4,0KiB [ ] /.icedteaplugin
! 4,0KiB [ ] /.gvfs
! 4,0KiB [ ] /.gnupg
! 4,0KiB [ ] /.gnome2_private
! 4,0KiB [ ] /.gnome2
! 4,0KiB [ ] /.gconfd
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dbus
! 4,0KiB [ ] /.compiz
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .face
4,0KiB [ ] .bashrc
4,0KiB [ ] .profile
4,0KiB [ ] .pulse-cookie
4,0KiB [ ] .registry
4,0KiB [ ] .bash_logout
4,0KiB [ ] .gtk-bookmarks
4,0KiB [ ] examples.desktop
4,0KiB [ ] .Xauthority
4,0KiB [ ] .dmrc
4,0KiB [ ] .esd_auth
4,0KiB [ ] .gnomerc
0,0 B [ ] .goutputstream-F04NMWPour le ncdu -x /home
Déjà, pendant le scan, j'ai
│ Warning: error scanning /home/francis/.cache/dconf │
│ some directory sizes may not be correct sinon, ça donne :
--- /home --------------------------------------------------------------------------------------------------------------------------------------------------------------------------
. 5,5GiB [##########] /francis
. 165,4MiB [ ] /sandrine
. 151,0MiB [ ] /auriane
. 149,4MiB [ ] /romain
. 5,6MiB [ ] /alexia
> 0,0 B [ ] /commun
--- /home/francis ------------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
3,5GiB [##########] /Documents
675,4MiB [# ] /Musique
544,7MiB [# ] /Images
. 387,0MiB [# ] /.cache
247,6MiB [ ] /Dropbox
149,2MiB [ ] /.dropbox-dist
24,1MiB [ ] /.mozilla
6,6MiB [ ] /.thumbnails
. 3,3MiB [ ] /.config
2,9MiB [ ] /Téléchargements
2,7MiB [ ] /.dropbox
2,1MiB [ ] /.local
1,4MiB [ ] /.adobe
664,0KiB [ ] /.gstreamer-0.10
528,0KiB [ ] /.gimp-2.8
444,0KiB [ ] /.macromedia
108,0KiB [ ] /.gconf
72,0KiB [ ] /.lyrics
44,0KiB [ ] /Bureau
12,0KiB [ ] /.avidemux
8,0KiB [ ] .xscreensaver
4,0KiB [ ] /anciens
4,0KiB [ ] /commun
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /.dbus
4,0KiB [ ] .bash_history
4,0KiB [ ] .bashrc
4,0KiB [ ] .Xdefaults
4,0KiB [ ] .ICEauthority
4,0KiB [ ] .BOINC Manager
4,0KiB [ ] .profile
4,0KiB [ ] .Xauthority
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .bash_logout
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .dmrc
4,0KiB [ ] .gtkrc-2.0
0,0 B [ ] .gksu.lock
--- /home/sandrine -----------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
149,2MiB [##########] /.dropbox-dist
16,0MiB [# ] /Téléchargements
12,0KiB [ ] /Bureau
4,0KiB [ ] /Documents
4,0KiB [ ] /Images
4,0KiB [ ] /anciens
4,0KiB [ ] /commun
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /Dropbox
! 4,0KiB [ ] /.thunderbird
! 4,0KiB [ ] /.thumbnails
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dropbox
! 4,0KiB [ ] /.config
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .bashrc
4,0KiB [ ] .Xdefaults
4,0KiB [ ] .profile
4,0KiB [ ] .bash_history
4,0KiB [ ] .ICEauthority
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .bash_logout
4,0KiB [ ] .Xauthority
4,0KiB [ ] .dmrc
4,0KiB [ ] .xscreensaver
--- /home/auriane ------------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
73,1MiB [##########] /Musique
40,6MiB [##### ] /Vidéos
21,5MiB [## ] /Images
8,0MiB [# ] /Bureau
6,1MiB [ ] /Téléchargements
796,0KiB [ ] /Documents
668,0KiB [ ] /.gstreamer-0.10
12,0KiB [ ] /.avidemux
4,0KiB [ ] /anciens
4,0KiB [ ] /commun
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Modèles
! 4,0KiB [ ] /.thumbnails
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.config
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .bashrc
4,0KiB [ ] .Xdefaults
4,0KiB [ ] .ICEauthority
4,0KiB [ ] .profile
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .bash_logout
4,0KiB [ ] .bash_history
4,0KiB [ ] .Xauthority
4,0KiB [ ] .dmrc
4,0KiB [ ] .xscreensaver
0,0 B [ ] .gksu.lock
--- /home/romain -------------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
149,2MiB [##########] /.dropbox-dist
8,0KiB [ ] /Bureau
4,0KiB [ ] /commun
4,0KiB [ ] /anciens
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Téléchargements
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
e 4,0KiB [ ] /Images
! 4,0KiB [ ] /Dropbox
e 4,0KiB [ ] /Documents
! 4,0KiB [ ] /.thumbnails
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.dropbox
! 4,0KiB [ ] /.config
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .bashrc
4,0KiB [ ] .Xdefaults
4,0KiB [ ] .profile
4,0KiB [ ] .bash_history
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .bash_logout
4,0KiB [ ] .Xauthority
4,0KiB [ ] .dmrc
4,0KiB [ ] .xscreensaver
0,0 B [ ] .ICEauthority
--- /home/alexia -------------------------------------------------------------------------------------------------------------------------------------------------------------------
/..
4,8MiB [##########] /Téléchargements
668,0KiB [# ] /.gstreamer-0.10
8,0KiB [ ] /Bureau
4,0KiB [ ] /commun
4,0KiB [ ] /anciens
e 4,0KiB [ ] /Vidéos
e 4,0KiB [ ] /Public
e 4,0KiB [ ] /Musique
e 4,0KiB [ ] /Modèles
e 4,0KiB [ ] /Images
e 4,0KiB [ ] /Documents
! 4,0KiB [ ] /.thumbnails
! 4,0KiB [ ] /.mozilla
! 4,0KiB [ ] /.macromedia
! 4,0KiB [ ] /.local
! 4,0KiB [ ] /.gconf
! 4,0KiB [ ] /.config
! 4,0KiB [ ] /.cache
! 4,0KiB [ ] /.adobe
4,0KiB [ ] .bashrc
4,0KiB [ ] .Xdefaults
4,0KiB [ ] .profile
4,0KiB [ ] .xsession-errors.old
4,0KiB [ ] .xsession-errors
4,0KiB [ ] .bash_logout
4,0KiB [ ] .bash_history
4,0KiB [ ] .Xauthority
4,0KiB [ ] .dmrc
4,0KiB [ ] .xscreensaver
0,0 B [ ] .gksu.lock
0,0 B [ ] .ICEauthorityet enfin
francis@g:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-45-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model: ST3200822AS
Serial Number: 4LJ1G3QW
Firmware Version: 3.01
User Capacity: 200 049 647 616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Sat Feb 21 21:49:00 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 056 043 006 Pre-fail Always - 77055099
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5710
5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always - 264
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 218771521
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8936
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5972
194 Temperature_Celsius 0x0022 042 054 000 Old_age Always - 42
195 Hardware_ECC_Recovered 0x001a 056 043 000 Old_age Always - 77055099
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 8936 hours (372 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7b b0 3f e5 Error: UNC at LBA = 0x053fb07b = 88060027
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 7b b0 3f e5 00 00:55:41.758 READ DMA
c8 00 f0 73 14 34 e5 00 00:55:41.758 READ DMA
c8 00 08 6b 14 34 e5 00 00:55:41.758 READ DMA
c8 00 08 63 14 34 e5 00 00:55:41.751 READ DMA
c8 00 10 53 20 bb e4 00 00:55:41.748 READ DMA
Error 1 occurred at disk power-on lifetime: 8798 hours (366 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b3 88 4c e4 Error: UNC at LBA = 0x044c88b3 = 72124595
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 b3 88 4c e4 00 01:09:24.465 READ DMA
c8 00 08 db b3 c2 e4 00 01:09:24.555 READ DMA
25 00 70 5b 81 4e e0 00 01:09:24.545 READ DMA EXT
25 00 00 5b 7d 4e e0 00 01:09:24.540 READ DMA EXT
c8 00 08 d3 de 78 e6 00 01:09:24.500 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2460 -
# 2 Extended offline Completed without error 00% 2280 -
# 3 Extended offline Aborted by host 90% 2279 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
francis@g:~$ L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#14 Le 22/02/2015, à 17:45
- moko138
Re : [Résolu]Temps de boot 14.04
fgi a écrit :
les *xsession qui sont sur /home/commun/* [sda3] datent de 2012
En effet. Mais c'est monté. Et c'est monté 78 secondes après sda4...
Pour moi, ce sont des reliquats qui doivent être nettoyés, tout bêtement. Je me propose de le faire, là, maintenant, histoire de clarifier le paysage. Sauf si tu préfères qu'on ne cumule pas trop de modifs ?
Pour l'instant, abstenons-nous. Si tu l'avais fait avant d'installer 14.04, il n'y aurait pas eu de doute, mais là... Et de toute façon, il faut que nous soyons fixés au plus vite sur l'état du disque !
Je ne trouve rien sur l'imprimante coté autostart :
Bizarre. Et dans /home/commun/francis/.config/*/autostart, justement ?
En tout cas désactive le lancement prématuré de blueman et dropbox,
- soit en renommant les fichiers en .bak,
- soit en éditant les fichiers : je pense que dedans tu as une ligne
hidden=falseà changer en
hidden=true- soit enfin par l'utilitaire graphique (dans Xub 12.04, cela s'appelle session-démarrage, mais dans Ub 14.04 ?)
Pour cups, cherche aussi dans l'utilitaire graphique. Au pire, tu trouverais des indications dans
man cupsd.confet dans /var/log/cups/access_log
Et pour la fin, tu as confondu. Tu es parti de postulats erronés :
- J'ai mon sda4 avec les données.
- J'ai mon sda3/home avec mes répertoires par profil (/home/francis).
pour aboutir à des conclusions logiquement farfelues.
En réalité, ton fstab montre que sda4 est ta racine. Elle contient aussi (c'est confirmé par les résutats des ncdu) le répertoire /home (créé automatiquement pendant la dernière installation) et une partie de vos données personnelles.
Et puis tu as sda3, plus grande, avec l'autre partie de vos données personnelles, et les fichiers de configuration (pas seulement les profils !) de 2012 dont j'espère qu'ils ne sont pas actifs, mais sans en être certain.
/home/commun sur lequel je monte mon sda4
Non, c'est le contraire : de même qu'on greffe un rameau sur un tronc, de même on ne peut monter les partitions que sur la racine ou (c'est ton cas) sur un de ses sous-répertoires, et non l'inverse.
Tu as donc monté sda3 sur sda4. Concrètement,
tu as monté /commun sur /home, quoi que tu aies cru.
à l'époque où j'étais en double boot 10.04 / 12.04 : chaque distrib avait, sur sa partition, un /home/<profil> avec tous les fichiers de conf, et j'avais positionné sur /home/commun/<profil> (donc, physiquement, sur sda4/<profil>), les sous-répertoires de chacun : Données, Téléchargements, Musique, etc... Et pour couronner le tout, j'avais, dans chaque fichier /home/<profil>/.config/user-dirs.dirs, changé les variables d'environnement pour aller pointer vers les dossiers correspondants de /home/commun/<profil>/
Encore une fois, l'idée est bonne mais il faut que ça reste une partition de pures données, qui ne s'appelle surtout pas /home/qqch, une partition sans les fichiers de config', ./cache, ./config et TOUS les autres ./qqch ET leurs sous-répertoires qui, eux, DOIVENT rester dans /home.
Je ne vois qu'un type d'exception :
dans /home/toto/.qqch, tu peux avoir par défaut un sous-répertoire de données (courrier, podcasts ou autre). Dans ces cas-là, toto ou l'admin ira dans les préférences du logiciel "qqch" pour indiquer que la place de ces données n'est pas l'emplacement par défaut mais /donnees/toto/qqch/xyz/.
C'est ce que j'ai fait pour gpodder (mon client de podcast) :
/home/moi/.config/gpodder est stabilisé à 5 Mo de pure configuration, et j'ai indiqué à gpodder de mettre les podcasts dans la partition /donnees, dans le répertoire /donnees/moi/telechargements/
Maintenant relis mon N.B.3, et ça devrait s'éclaircir,
pendant que j'approfondis tes réponses, en particulier celle de smart qui m'intrigue.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 22/02/2015, à 22:17
- fgi
Re : [Résolu]Temps de boot 14.04
Merci pour la clarification sur le /home et le reste ... j'ai pigé.
Du coup, si tu me confirmes que mon disque est sain, je ferai bien les manip suivantes :
- M'assurer que toutes les données persos sont sur sda3 que je dédie comme disque de données, et uniquement de données
- Sauvegarder mes données (sda3) sur un DDE
- Réinstaller xubuntu 14.04 sur sda1 (j'ai remis mon lecteur de cartes nettoyé pour avoir la config hard à jour), à la place de ma vieille distrib, avec le home et les répertoires de profil minimalistes
- Re-chronométrer les temps de démarrage.
-> Si ce n'est toujours pas bon, je reposte ici mes logs et on continue à creuser.
-> Si c'est bon, je pourrais :
- simplifier mes partitions en fusionnant les sda2, 3, 4 avec GParted
- réorganiser mes données par utilisateur et voir comment le pointe dessus depuis les profils (liens ou variables d'environnements)
Qu'en penses-tu ?
Dans ton #11, tu m'as fais faire
dpkg --get-selections > /home/commun/francis/liste-des-paquets-20150221.txtQuelle sera la meilleure façon d'exploiter ce fichier une fois ma distrib refaite ? A priori, j'imagine réduire ce fichier aux pkg que j'ai installés (supprimer tout ce qui vient de la distrib), et ensuite faire un
sudo apt-get install pkg1, pkg2, pkg3 ....J'ai bon ?
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#16 Le 23/02/2015, à 15:56
- moko138
Re : [Résolu]Temps de boot 14.04
Ne brûlons pas les étapes.
Je ne suis pas encore fixé sur l'état de ton disque.
Oublie ma suggestion sur les paquets listés, parce que, au cas où il y aurait maldonne dans tes paquets actuels, ce ne serait pas la peine de l'injecter dans ta prochaine installation !
Mais en fait, je vois plutôt des paramétrages inadéquats.
Donc donne
cat /etc/apt/sources.listls -l /etc/apt/sources.list.dIl y a un souci avec cups.
Donne une capture écran de "session-démarrage" (quel que soit son nom sous Ubuntu).
Donne le contenu de /etc/init/cups.conf et de
/lib/init/apparmor-profile-load
Il y a une mésentente entre ta carte réseau filaire et ta box ou ton routeur.
Cela n'est pas de mon ressort. Je te suggère, pour ce problème-là, d'ouvrir un fil dans la section "réseaux" du forum.
Ton titre pourrait comporter "filaire" "RTL8139" "14.04" 'démarrage lent"
Dans le corps, tu redis ... lenteur au démarrage, en rapport, entre autres, avec la carte réseau filaire, et donne bien :
- le lien vers le présent fil
- ton dernier dmesg en date
- tous les retours séparés de commandes requis ! Savoir :
uname -r -m
ifconfig
cat /etc/network/interfaces
nm-tool
lsmod
lspci -k -nn | grep -A 3 -i net
sudo lshw -C networkJe ne pense pas qu'on te demande les retours spécifiques à la wifi ; pour mémoire, ce sont :
iwconfig
lsusb -v # [quand carte la carte wifi est connectée en usb]
sudo rfkill list
sudo iwlist scanPS : Pour les rapports ncdu,
ne modifie pas tes rapports antérieurs, ils suffisent. Mais,
à l'avenir, rappelle-toi que, comme le but est de localiser le volumineux, tu peux presque toujours ne pas donner les lignes aux valeurs basses, mais tu dois donner la dernière ligne, celle du total !
C'est si vrai que ncdu te l'affiche toujours, alors que la fenêtre ne peut pas contenir toutes les lignes de /home ou de /var/log :
--- /home/moi--------------
35,9MiB [##########] /.cache
22,5MiB [###### ] /.mozilla
2,3MiB [ ] /.config
2,3MiB [ ] /.gimp-2.8
964,0KiB [ ] 967_001.xcf
852,0KiB [ ] /.gstreamer-0.10
824,0KiB [ ] .xsession-errors
516,0KiB [ ] /.local
412,0KiB [ ] /.thumbnails
(...) <-- éléments les moins volumineux
Total disk usage: 67,2MiB Apparent size: 65,8MiB Items: 1103= = = = =
Installer
Du coup, si tu me confirmes que mon disque est sain, je ferai bien les manip suivantes :
- M'assurer que toutes les données persos sont sur sda3 que je dédie comme disque de données, et uniquement de données
- Sauvegarder mes données (sda3) sur un DDE
- Réinstaller xubuntu 14.04 sur sda1
Les 2 premiers points sont parfaits. Ils te permettent d'être zen ensuite, ce qui favorisera grandement ta réussite
N.B. 4 : Avec 2 Go de ram, tu prendras, malgré ton processeur 64 bits, un système en 32 bits et non "x86_64" comme actuellement : ton système sera ainsi plus rapide.
Après, disque neuf ou pas, il faut préparer tes partitions AVANT d'installer.
Et puisque tu as sauvegardé, tu vas pouvoir formater chaque partition.
Si la table de partitions est de type msdos, comme celle de ton disque actuel, je verrais bien :
Option 2 :
sda1 primaire ext4 / de l'OS 1 environ 20 Gio/20.480 Mio, home minimal compris
sda2 primaire ext4 /donnees la plus grande partition, bien sûr (environ 160 Gio)
sda3 étendue
sda5 swap 2,2 Gio/2252 Mio
sda6 ext4 OS de secours (0,8 Gio si c'est Slitaz, 8 Gio si tu choisis Xubuntu ou CrunchBang)
Option 1 :
sda1 primaire ext4 / de l'OS 1 environ 20 Gio/20.480 Mio, SANS home
sda2 primaire ext4 /home la plus grande partition, bien sûr (environ 160 Mio).
sda3 étendue
sda5 swap 2,2 Gio/2252 Mio
sda6 ext4 OS de secours (0,8 Gio si c'est Slitaz, 8 Gio si tu choisis Xubuntu ou CrunchBang)
Dans les deux cas, dans sda2 (/donnees OU BIEN /home), tu peux déjà créer (après le formatage et avant l'installation) les dossiers qui seront nécessaires :
/alexia, /auriane, /commun, /francis, /romain et /sandrine
Pendant l'installation de l'OS principal, à l'étape 3, tu choisis impérativement (je te le rappelle) "autre chose", puis, comme points de montage, tu spécifies :
sda1 "/" ext4 formater : non (puisque déjà fait)
sda2 "/donnees" ext4 formater : non (puisque déjà fait)
ou
sda2 "/home" ext4 formater : non (puisque déjà fait)
Tu actives (ce n'est pas un montage) :
sda5 "/swap" swap formater : non (puisque déjà fait)
Tu ne mentionnes pas sda6. Ou, si la question t'est posée, tu réponds "ne pas utiliser".
Au 1er redémarrage, tu crées un groupe 'famille' et les autres comptes que celui créé pendant l'installation.
Et aussitôt, dans le cas de l'option 2 :
sudo chown francis:famille -R /donnees/commun # (Si le sudoer est francis)sudo chmod u+g,rwx /donnees/communsudo chmod o-rwx /donnees/communSi tu étais tenté de donner les droits rwx à o(ther) lis ce que tiramiseb en dit
et pour les comptes individuels :
sudo chown toto:toto -R /donnees/toto
Dans le cas de l'option 1, ... tu connais la musique !
Il restera juste à faire :
sudo chown francis:famille -R /home/commun # (Si le sudoer est francis)sudo chmod u+g,rwx /home/communsudo chmod o-rwx /home/communN.B. 5 : Quand tu auras copié du DDE vers sda2 les données personnelles de chacun,
sudo chown toto:toto -R /donnees/totoou
sudo chown toto:toto -R /home/totosera à refaire une fois, pour mettre les propriétaires d'équerre.
N.B. 6 : Le tout à moduler : je suppose qu'il y aura plus d'un sudoer.
N.B. 7 : J'allais oublier ! Pour inciter tes proches à une bonne pratique (données dans sda2), si tu choisis l'option 2 (home minimal), pense à fixer un quota, entre 0,5 et 1,0 Gio par personne. Peut-être un peu plus pour sudoer si tu ne peux pas l'éviter (j'ai vu un /home/commun/francis/.wine de 1,3 Gio, mais c'est dans le profil de 2012 ).
Les 15 premiers jours tes proches vont te maudire ! Ce sera l'occasion de leur montrer comment utiliser les préférences des applis pour bien placer leurs données afin que Papa puisse les récupérer en cas de pépin-système.
Accessoirement, ils pourront voir dans le "PS" ci-dessus l'exemple d'un /home occupant réellement moins de 70 Mo après 26 heures sous tension malgré des dizaines d'onglets ouverts dans iceweasel (qui m'a l'air notablement moins gourmand que firefox... "mais ceci est une autre histoire", comme disait Kipling). Et les grands sauront vite faire
ncdu -x ~pour savoir à tout moment où ils en sont, quand les sudoers feront en plus
df -h
df -ipour contrôler le remplissage des partitions.
Mais quand il y aura un plantage système et que Papa leur restituera un accès (en live ou par l'OS de secours) en 3 minutes et à l'intégralité de leurs données, au choix ils trouveront cela normal 
ou Papa sera un dieu !
N.B. 8 : Pense à mettre en place la sauvegarde fréquente du contenu de sda2 vers le DDE !
Ça aussi, c'est considérablement simplifié par la séparation des données, et c'est une bonne protection contre la mort d'un disque...
= = = = =
Bon, justement dans tout ça, j'ai pris du retard dans l'étude des données SMART ;
à bientôt !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 23/02/2015, à 21:41
- fgi
Re : [Résolu]Temps de boot 14.04
Tu ne crois pas qu'une réinstallation complète serait un bon pré-requis avant d'investiguer plus avant ?
Tu aimes gratouiller pour trouver la source des pb ... je reconnais bien là l'esprit des ubuntueros
Aller, voici les contenus que tu m'as demandés.
francis@g:/etc/cups$ cat /etc/apt/sources.list
# deb cdrom:[Xubuntu 14.04.1 LTS _Trusty Tahr_ - Release amd64 (20140723)]/ trusty main multiverse restricted universe
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb-src http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu trusty partner
# deb-src http://archive.canonical.com/ubuntu trusty partner
## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
deb http://extras.ubuntu.com/ubuntu trusty main
deb http://linux.dropbox/com/ubuntu trusty main
# deb-src http://linux.dropbox/com/ubuntu trusty main
# deb-src http://extras.ubuntu.com/ubuntu trusty main
francis@g:/etc/cups$ francis@g:/etc/cups$ ls -l /etc/apt/sources.list.d
total 24
-rw-r--r-- 1 root root 138 déc. 31 18:40 clipgrab-team-ppa-trusty.list
-rw-r--r-- 1 root root 138 déc. 31 18:40 clipgrab-team-ppa-trusty.list.save
-rw-r--r-- 1 root root 170 déc. 31 18:40 danielrichter2007-grub-customizer-trusty.list
-rw-r--r-- 1 root root 170 déc. 31 18:40 danielrichter2007-grub-customizer-trusty.list.save
-rw-r--r-- 1 root root 126 déc. 31 18:40 mjasnik-ppa-trusty.list
-rw-r--r-- 1 root root 126 déc. 31 18:40 mjasnik-ppa-trusty.list.save
francis@g:/etc/cups$ francis@g:/etc/cups$ cat /etc/init/cups.conf
# cups - CUPS Printing spooler and server
description "CUPS printing spooler/server"
author "Michael Sweet <msweet@apple.com>"
start on (filesystem
and (started dbus or runlevel [2345]))
stop on runlevel [016]
respawn
respawn limit 3 12
pre-start script
[ -x /usr/sbin/cupsd ]
# load modules for parallel port support
if [ -r /etc/default/cups ]; then
. /etc/default/cups
fi
if [ "$LOAD_LP_MODULE" = "yes" -a -f /usr/lib/cups/backend/parallel \
-a -f /proc/modules -a -x /sbin/modprobe ]; then
modprobe -q -b lp || true
modprobe -q -b ppdev || true
modprobe -q -b parport_pc || true
fi
mkdir -p /var/run/cups/certs
if [ -x /lib/init/apparmor-profile-load ]; then
/lib/init/apparmor-profile-load usr.sbin.cupsd
fi
end script
exec /usr/sbin/cupsd -f
post-start script
# wait until daemon is ready
timeout=60
while [ ! -e /var/run/cups/cups.sock ]; do
sleep 0.5
timeout=$((timeout-1))
if [ "$timeout" -eq 0 ]; then
echo "cupsd failed to create /var/run/cups/cups.sock, skipping automatic printer configuration" >&2
exit 0
fi
done
# coldplug USB printers
if ! /lib/udev/udev-configure-printer enumerate 2>/dev/null; then
if type udevadm > /dev/null 2>&1 && [ -x /lib/udev/udev-configure-printer ]; then
for printer in `udevadm trigger --verbose --dry-run --subsystem-match=usb \
--attr-match=bInterfaceClass=07 --attr-match=bInterfaceSubClass=01 2>/dev/null || true; \
udevadm trigger --verbose --dry-run --subsystem-match=usb \
--sysname-match='lp[0-9]*' 2>/dev/null || true`; do
/lib/udev/udev-configure-printer add "${printer#/sys}"
done
fi
fi
end script
francis@g:/etc/cups$ francis@g:/etc/cups$ cat /lib/init/apparmor-profile-load
#!/bin/sh
# apparmor-profile-load
#
# Helper for loading an AppArmor profile in pre-start scripts.
[ -z "$1" ] && exit 1 # require a profile name
# do not load in a container
[ -x /bin/running-in-container ] && /bin/running-in-container >/dev/null 2>&1 && exit 0
[ -d /rofs/etc/apparmor.d ] && exit 0 # do not load if running liveCD
profile=/etc/apparmor.d/"$1"
[ -e "$profile" ] || exit 0 # skip when missing profile
module=/sys/module/apparmor
[ -d $module ] || exit 0 # do not load without AppArmor in kernel
[ -x /sbin/apparmor_parser ] || exit 0 # do not load without parser
aafs=/sys/kernel/security/apparmor
[ -d $aafs ] || exit 0 # do not load if unmounted
[ -w $aafs/.load ] || exit 1 # fail if cannot load profiles
params=$module/parameters
[ -r $params/enabled ] || exit 0 # do not load if missing
read enabled < $params/enabled || exit 1 # if this fails, something went wrong
[ "$enabled" = "Y" ] || exit 0 # do not load if disabled
/sbin/apparmor_parser -r -W "$profile" || exit 0 # LP: #1058356
francis@g:/etc/cups$ En complément, sache que j'ai retiré le montage du sda3 dans fstab, ce qui me prémunit contre des accès foiresques dans les anciens répertoires de profils.
Mon temps de boot est toujours sensiblement le même : après le grub, 2:35 avant d'avoir l'écran de login, et l'affichage du splash screen xubuntu intervient à peu après la mi-parcours (vers 1:30).
Je te donne le dernier dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-7168, BIOS 080012 05/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[ 0.000000] [mem 0x7fe00000-0x7ffcffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b4e000-0x36d9efff]
[ 0.000000] ACPI: RSDP 00000000000f9070 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffd0000 000038 (v01 A M I OEMRSDT 05000504 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffd0200 000084 (v02 A M I OEMFACP 05000504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffd0430 0037BD (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007ffde000 000040
[ 0.000000] ACPI: APIC 000000007ffd0390 000054 (v01 A M I OEMAPIC 05000504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffd03f0 00003C (v01 A M I OEMMCFG 05000504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffd3bf0 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 000000007ffde040 000056 (v01 A M I AMI_OEM 05000504 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
[ 0.000000] NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520144 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82368 r8192 d24128 u2097152
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=ae9650f8-1c1b-4503-99e4-c28a81da3e4a ro quiet splash tpm_tis.force=1 vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 91c8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028292K/2096568K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 68276K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.694 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4377.38 BogoMIPS (lpj=8754776)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004077] AppArmor: AppArmor initialized
[ 0.004079] Yama: becoming mindful.
[ 0.004381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009499] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010266] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010273] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010598] Initializing cgroup subsys memory
[ 0.010609] Initializing cgroup subsys devices
[ 0.010612] Initializing cgroup subsys freezer
[ 0.010614] Initializing cgroup subsys blkio
[ 0.010617] Initializing cgroup subsys perf_event
[ 0.010620] Initializing cgroup subsys hugetlb
[ 0.010645] tseg: 0000000000
[ 0.010652] mce: CPU supports 5 MCE banks
[ 0.010663] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010663] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010663] tlb_flushall_shift: 4
[ 0.019296] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.020284] ACPI: Core revision 20131115
[ 0.022174] ACPI: All ACPI Tables successfully acquired
[ 0.022450] ftrace: allocating 28554 entries in 112 pages
[ 0.032572] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.074347] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 2f, stepping: 00)
[ 0.076000] Performance Events: AMD PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 48
[ 0.076000] ... generic registers: 4
[ 0.076000] ... value mask: 0000ffffffffffff
[ 0.076000] ... max period: 00007fffffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000000000f
[ 0.076000] x86: Booted up 1 node, 1 CPUs
[ 0.076000] smpboot: Total of 1 processors activated (4377.38 BogoMIPS)
[ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] devtmpfs: initialized
[ 0.079059] EVM: security.selinux
[ 0.079061] EVM: security.SMACK64
[ 0.079063] EVM: security.ima
[ 0.079064] EVM: security.capability
[ 0.079144] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.080698] pinctrl core: initialized pinctrl subsystem
[ 0.080793] regulator-dummy: no parameters
[ 0.080835] RTC time: 19:42:08, date: 02/23/15
[ 0.080887] NET: Registered protocol family 16
[ 0.081060] cpuidle: using governor ladder
[ 0.081062] cpuidle: using governor menu
[ 0.081069] node 0 link 0: io port [1000, ffffff]
[ 0.081072] TOM: 0000000080000000 aka 2048M
[ 0.081075] node 0 link 0: mmio [e0000000, efffffff]
[ 0.081078] node 0 link 0: mmio [80000000, dfffffff]
[ 0.081081] node 0 link 0: mmio [a0000, bffff]
[ 0.081083] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.081086] bus: [bus 00-ff] on node 0 link 0
[ 0.081088] bus: 00 [io 0x0000-0xffff]
[ 0.081090] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.081092] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.081145] ACPI: bus type PCI registered
[ 0.081148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.081222] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081225] PCI: not using MMCONFIG
[ 0.081227] PCI: Using configuration type 1 for base access
[ 0.082457] bio: create slab <bio-0> at 0
[ 0.082634] ACPI: Added _OSI(Module Device)
[ 0.082636] ACPI: Added _OSI(Processor Device)
[ 0.082638] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082639] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084082] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.085856] ACPI: Interpreter enabled
[ 0.085863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.085868] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.085884] ACPI: (supports S0 S3 S4 S5)
[ 0.085886] ACPI: Using IOAPIC for interrupt routing
[ 0.085974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.087204] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.096999] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.097133] ACPI: No dock devices found.
[ 0.102607] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.102615] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.102622] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.102745] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.102748] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.102750] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.102753] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.102756] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.102758] PCI: root bus 00: hardware-probed resources
[ 0.102974] PCI host bridge to bus 0000:00
[ 0.102978] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.102981] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.102983] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.102986] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.102994] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[ 0.103090] pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
[ 0.103126] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.103177] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.103246] pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
[ 0.103274] pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.103287] pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
[ 0.103300] pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
[ 0.103314] pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.103327] pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
[ 0.103340] pci 0000:00:11.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[ 0.103354] pci 0000:00:11.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.103407] pci 0000:00:11.0: supports D1 D2
[ 0.103496] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
[ 0.103522] pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
[ 0.103535] pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
[ 0.103549] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.103562] pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
[ 0.103575] pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
[ 0.103588] pci 0000:00:12.0: reg 0x24: [mem 0xfebff800-0xfebff9ff]
[ 0.103602] pci 0000:00:12.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[ 0.103655] pci 0000:00:12.0: supports D1 D2
[ 0.103740] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[ 0.103764] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.103915] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.103961] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[ 0.103985] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.104145] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.104194] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[ 0.104221] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.104339] pci 0000:00:13.2: supports D1 D2
[ 0.104342] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.104397] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.104448] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[ 0.104469] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.104483] pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
[ 0.104541] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.104657] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[ 0.104681] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.104694] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.104707] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.104720] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.104733] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.104873] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[ 0.105036] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[ 0.105126] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.105169] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[ 0.105192] pci 0000:00:14.5: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.105341] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.105383] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.105461] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.105536] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.105609] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.105741] pci 0000:01:00.0: [10de:0162] type 00 class 0x030000
[ 0.105752] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.105763] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.105774] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.105788] pci 0000:01:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 0.105855] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.105863] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.105868] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.105872] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.105922] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.105951] pci 0000:02:03.0: reg 0x10: [io 0x8800-0x88ff]
[ 0.105967] pci 0000:02:03.0: reg 0x14: [mem 0xfe8fe400-0xfe8fe4ff]
[ 0.106037] pci 0000:02:03.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[ 0.106084] pci 0000:02:03.0: supports D1 D2
[ 0.106087] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.106149] pci 0000:02:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.106179] pci 0000:02:04.0: reg 0x10: [mem 0xfe8fd800-0xfe8fdfff]
[ 0.106195] pci 0000:02:04.0: reg 0x14: [io 0x8c00-0x8c7f]
[ 0.106315] pci 0000:02:04.0: supports D2
[ 0.106317] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.106425] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.106434] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.106440] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.106446] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.106448] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.106451] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.107098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107159] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107217] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107276] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107335] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107393] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.107449] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.107593] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.107619] Found 1 acpi root devices
[ 0.107765] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.107768] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.107770] vgaarb: loaded
[ 0.107771] vgaarb: bridge control possible 0000:01:00.0
[ 0.108012] SCSI subsystem initialized
[ 0.108083] libata version 3.00 loaded.
[ 0.108112] ACPI: bus type USB registered
[ 0.108135] usbcore: registered new interface driver usbfs
[ 0.108145] usbcore: registered new interface driver hub
[ 0.108176] usbcore: registered new device driver usb
[ 0.108292] PCI: Using ACPI for IRQ routing
[ 0.120313] PCI: pci_cache_line_size set to 64 bytes
[ 0.120378] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.120381] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.120490] NetLabel: Initializing
[ 0.120491] NetLabel: domain hash size = 128
[ 0.120493] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120509] NetLabel: unlabeled traffic allowed by default
[ 0.120631] Switched to clocksource refined-jiffies
[ 0.129009] AppArmor: AppArmor Filesystem Enabled
[ 0.129051] pnp: PnP ACPI init
[ 0.129070] ACPI: bus type PNP registered
[ 0.129145] pnp 00:00: [dma 4]
[ 0.129178] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.129221] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.129251] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.129280] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129851] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.129854] system 00:04: [io 0x040b] has been reserved
[ 0.129857] system 00:04: [io 0x04d6] has been reserved
[ 0.129860] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.129863] system 00:04: [io 0x0c14] has been reserved
[ 0.129865] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.129868] system 00:04: [io 0x0c52] has been reserved
[ 0.129871] system 00:04: [io 0x0c6c] has been reserved
[ 0.129873] system 00:04: [io 0x0c6f] has been reserved
[ 0.129876] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.129879] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.129881] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.129885] system 00:04: [io 0x0800-0x089f] could not be reserved
[ 0.129887] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.129890] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.129894] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.129898] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129958] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.130065] system 00:06: [io 0x0e00-0x0e7f] has been reserved
[ 0.130068] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130145] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.130148] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.130152] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130216] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.130220] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130375] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.130378] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.130381] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.130384] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.130387] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130505] pnp: PnP ACPI: found 10 devices
[ 0.130507] ACPI: bus type PNP unregistered
[ 0.136685] Switched to clocksource acpi_pm
[ 0.136720] pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
[ 0.136729] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.136732] pci 0000:00:02.0: bridge window [mem 0xfa700000-0xfe7fffff]
[ 0.136736] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.136740] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.136744] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.136751] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.136764] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.136766] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136769] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136771] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
[ 0.136774] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.136777] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.136779] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.136781] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.136784] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.136786] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.136834] NET: Registered protocol family 2
[ 0.137111] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.137220] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.137356] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.137435] TCP: reno registered
[ 0.137440] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.137593] NET: Registered protocol family 1
[ 0.137608] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.292169] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.292180] PCI: CLS 64 bytes, default 64
[ 0.292263] Trying to unpack rootfs image as initramfs...
[ 0.711082] Freeing initrd memory: 18756K (ffff880035b4e000 - ffff880036d9f000)
[ 0.711483] microcode: AMD CPU family 0xf not supported
[ 0.711486] Scanning for low memory corruption every 60 seconds
[ 0.711771] Initialise system trusted keyring
[ 0.711835] audit: initializing netlink socket (disabled)
[ 0.711851] type=2000 audit(1424720528.707:1): initialized
[ 0.743980] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.745410] zbud: loaded
[ 0.745583] VFS: Disk quotas dquot_6.5.2
[ 0.745642] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.746241] fuse init (API version 7.22)
[ 0.746329] msgmni has been set to 3998
[ 0.746397] Key type big_key registered
[ 0.746731] Key type asymmetric registered
[ 0.746734] Asymmetric key parser 'x509' registered
[ 0.746772] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.746809] io scheduler noop registered
[ 0.746811] io scheduler deadline registered (default)
[ 0.746839] io scheduler cfq registered
[ 0.746977] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.746999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.747043] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.747044] vesafb: scrolling: redraw
[ 0.747047] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.747248] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.805241] Console: switching to colour frame buffer device 160x64
[ 0.863177] fb0: VESA VGA frame buffer device
[ 0.863223] ipmi message handler version 39.2
[ 0.863298] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.863304] ACPI: Power Button [PWRB]
[ 0.863346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.863349] ACPI: Power Button [PWRF]
[ 0.863386] ACPI: duty_cycle spans bit 4
[ 0.863474] GHES: HEST is not enabled!
[ 0.863562] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.864959] Linux agpgart interface v0.103
[ 0.865082] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.865111] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.865114] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[ 0.865138] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[ 0.865141] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[ 0.866721] brd: module loaded
[ 0.867546] loop: module loaded
[ 0.868080] libphy: Fixed MDIO Bus: probed
[ 0.868193] tun: Universal TUN/TAP device driver, 1.6
[ 0.868194] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.868241] PPP generic driver version 2.4.2
[ 0.868282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.868287] ehci-pci: EHCI PCI platform driver
[ 0.868406] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.868413] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.868488] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 0.880022] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.880118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880123] usb usb1: Product: EHCI Host Controller
[ 0.880126] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 0.880128] usb usb1: SerialNumber: 0000:00:13.2
[ 0.880247] hub 1-0:1.0: USB hub found
[ 0.880257] hub 1-0:1.0: 8 ports detected
[ 0.880468] ehci-platform: EHCI generic platform driver
[ 0.880481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.880482] ohci-pci: OHCI PCI platform driver
[ 0.880557] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.880563] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.880583] ohci-pci 0000:00:13.0: irq 19, io mem 0xfebfe000
[ 0.940064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.940067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940069] usb usb2: Product: OHCI PCI host controller
[ 0.940071] usb usb2: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 0.940074] usb usb2: SerialNumber: 0000:00:13.0
[ 0.940173] hub 2-0:1.0: USB hub found
[ 0.940185] hub 2-0:1.0: 4 ports detected
[ 0.940340] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.940349] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.940366] ohci-pci 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 1.000059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.000062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000064] usb usb3: Product: OHCI PCI host controller
[ 1.000066] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 1.000069] usb usb3: SerialNumber: 0000:00:13.1
[ 1.000185] hub 3-0:1.0: USB hub found
[ 1.000197] hub 3-0:1.0: 4 ports detected
[ 1.000303] ohci-platform: OHCI generic platform driver
[ 1.000314] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000390] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.000392] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.001178] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.001279] mousedev: PS/2 mouse device common for all mice
[ 1.001400] rtc_cmos 00:01: RTC can wake from S4
[ 1.001547] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.001576] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 1.001659] device-mapper: uevent: version 1.0.3
[ 1.001729] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.001736] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.001866] TCP: cubic registered
[ 1.001972] NET: Registered protocol family 10
[ 1.002202] NET: Registered protocol family 17
[ 1.002213] Key type dns_resolver registered
[ 1.002424] Loading compiled-in X.509 certificates
[ 1.003674] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.003690] registered taskstats version 1
[ 1.006560] Key type trusted registered
[ 1.009112] Key type encrypted registered
[ 1.011622] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.011628] IMA: No TPM chip found, activating TPM-bypass!
[ 1.011893] regulator-dummy: disabling
[ 1.011941] Magic number: 3:404:749
[ 1.011972] tty ttyS0: hash matches
[ 1.012080] rtc_cmos 00:01: setting system clock to 2015-02-23 19:42:09 UTC (1424720529)
[ 1.012281] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 1.012284] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 1.012285] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 1.012287] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.012313] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 1.012320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.012321] EDD information not available.
[ 1.012353] PM: Hibernation image not present or could not be loaded.
[ 1.014620] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.014624] Write protecting the kernel read-only data: 12288k
[ 1.017944] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.020907] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.030324] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.040381] systemd-udevd[90]: starting version 204
[ 1.070510] sata_sil 0000:00:11.0: version 2.4
[ 1.084748] scsi0 : sata_sil
[ 1.088147] scsi1 : sata_sil
[ 1.088222] ata1: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffc80 irq 23
[ 1.088227] ata2: SATA max UDMA/100 mmio m512@0xfebffc00 tf 0xfebffcc0 irq 23
[ 1.093056] scsi2 : sata_sil
[ 1.096418] scsi3 : sata_sil
[ 1.096486] ata3: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff880 irq 22
[ 1.096491] ata4: SATA max UDMA/100 mmio m512@0xfebff800 tf 0xfebff8c0 irq 22
[ 1.098066] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.098090] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.105640] scsi4 : pata_atiixp
[ 1.108135] scsi5 : pata_atiixp
[ 1.108206] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.108208] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.116599] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.117876] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0000000000018800, 00:11:09:19:9c:15, IRQ 20
[ 1.184065] firewire_ohci 0000:02:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.284589] ata6.00: ATAPI: LITE-ON DVDRW SOHW-1633S, B9S5, max UDMA/66
[ 1.300529] ata6.00: configured for UDMA/66
[ 1.408056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.416044] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.416545] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 1.416548] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.432485] ata1.00: configured for UDMA/100
[ 1.432617] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 1.432865] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.432934] sd 0:0:0:0: [sda] Write Protect is off
[ 1.432937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.432967] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.433159] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.460660] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.461096] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.684125] firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000096798a, S400
[ 1.708026] tsc: Refined TSC clocksource calibration: 2188.786 MHz
[ 1.752047] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.828045] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 2.038071] usb 3-2: New USB device found, idVendor=047d, idProduct=1020
[ 2.038075] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.038078] usb 3-2: Product: Kensington Expert Mouse
[ 2.038080] usb 3-2: Manufacturer: Kensington
[ 2.044614] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.051596] usbcore: registered new interface driver usbhid
[ 2.051601] usbhid: USB HID core driver
[ 2.054431] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[ 2.055305] hid-generic 0003:047D:1020.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:13.1-2/input0
[ 2.072057] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.072979] scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S B9S5 PQ: 0 ANSI: 5
[ 2.075162] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.075165] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.075279] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.075432] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.216037] usb 2-4: new full-speed USB device number 2 using ohci-pci
[ 2.425066] usb 2-4: New USB device found, idVendor=058f, idProduct=9360
[ 2.425072] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.425075] usb 2-4: Product: USB Reader
[ 2.425077] usb 2-4: Manufacturer:
[ 2.425079] usb 2-4: SerialNumber: 2004888
[ 2.431095] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 2.431185] scsi6 : usb-storage 2-4:1.0
[ 2.431470] usbcore: registered new interface driver usb-storage
[ 2.446528] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.708091] Switched to clocksource tsc
[ 3.435077] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.441070] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.447069] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.453068] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.453332] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.453475] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 3.453605] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 3.453755] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 3.543070] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.553066] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.563066] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.573065] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 10.173824] random: nonblocking pool is initialized
[ 76.356854] Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k FS
[ 76.431416] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 76.648063] systemd-udevd[271]: starting version 204
[ 77.112682] lp: driver loaded but no devices found
[ 77.152396] ppdev: user-space parallel port driver
[ 77.248897] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 77.271423] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 77.343147] [drm] Initialized drm 1.1.0 20060810
[ 77.384506] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 77.465793] MCE: In-kernel MCE decoding enabled.
[ 77.471221] EDAC MC: Ver: 3.0.0
[ 77.474022] wmi: Mapper loaded
[ 77.485641] AMD64 EDAC driver v3.4.0
[ 77.485686] EDAC amd64: DRAM ECC enabled.
[ 77.485691] EDAC amd64: K8 revE or earlier detected (node 0).
[ 77.485735] EDAC amd64: CS0: Double data rate SDRAM
[ 77.485737] EDAC amd64: CS2: Double data rate SDRAM
[ 77.485739] EDAC amd64: CS3: Double data rate SDRAM
[ 77.488691] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 77.490675] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 77.617642] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 77.617647] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 77.617676] Console: switching to colour dummy device 80x25
[ 77.624212] [drm] hdmi device not found 1 0 1
[ 77.624291] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x044200a2
[ 77.624294] nouveau [ DEVICE][0000:01:00.0] Chipset: NV44 (NV44)
[ 77.624297] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 77.624897] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 77.714635] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 77.714638] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 77.714827] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 77.714831] nouveau [ VBIOS][0000:01:00.0] version 05.44.02.24.00
[ 77.762268] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 77.762273] nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
[ 77.762276] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 77.954304] type=1400 audit(1424720606.437:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=363 comm="apparmor_parser"
[ 77.954310] type=1400 audit(1424720606.437:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=363 comm="apparmor_parser"
[ 77.954314] type=1400 audit(1424720606.437:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=363 comm="apparmor_parser"
[ 77.955024] type=1400 audit(1424720606.437:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=363 comm="apparmor_parser"
[ 77.955029] type=1400 audit(1424720606.437:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=363 comm="apparmor_parser"
[ 77.955415] type=1400 audit(1424720606.437:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=363 comm="apparmor_parser"
[ 77.956181] type=1400 audit(1424720606.441:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=348 comm="apparmor_parser"
[ 77.956187] type=1400 audit(1424720606.441:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=348 comm="apparmor_parser"
[ 77.956192] type=1400 audit(1424720606.441:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=348 comm="apparmor_parser"
[ 77.956832] type=1400 audit(1424720606.441:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=348 comm="apparmor_parser"
[ 78.634266] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 78.634280] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 78.634285] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 78.707030] nouveau [ CLK][0000:01:00.0] 20: core 350 MHz shader 350 MHz memory 500 MHz
[ 78.707045] nouveau [ CLK][0000:01:00.0] --: core 200 MHz memory 401 MHz
[ 78.724809] [TTM] Zone kernel: Available graphics memory: 1024950 kiB
[ 78.724813] [TTM] Initializing pool allocator
[ 78.724823] [TTM] Initializing DMA pool allocator
[ 78.724840] nouveau [ DRM] VRAM: 60 MiB
[ 78.724842] nouveau [ DRM] GART: 512 MiB
[ 78.724848] nouveau [ DRM] TMDS table version 1.1
[ 78.724850] nouveau [ DRM] DCB version 3.0
[ 78.724853] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 78.724856] nouveau [ DRM] DCB outp 01: 01011312 00000020
[ 78.724859] nouveau [ DRM] DCB outp 02: 020223f1 0000c033
[ 78.724861] nouveau [ DRM] DCB conn 00: 0000
[ 78.724863] nouveau [ DRM] DCB conn 01: 2130
[ 78.724865] nouveau [ DRM] DCB conn 02: 0210
[ 78.724867] nouveau [ DRM] DCB conn 03: 0211
[ 78.724869] nouveau [ DRM] DCB conn 04: 0213
[ 78.746652] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 78.746657] [drm] No driver support for vblank timestamp query.
[ 78.746705] nouveau [ DRM] 0xD1F3: Parsing digital output script table
[ 78.826960] nouveau [ DRM] MM: using M2MF for buffer copies
[ 78.826972] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
[ 78.916256] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff88007a00e800
[ 78.916435] fbcon: nouveaufb (fb0) is primary device
[ 78.944846] Console: switching to colour frame buffer device 160x64
[ 78.947148] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 78.947150] nouveau 0000:01:00.0: registered panic notifier
[ 78.947157] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 79.064178] init: failsafe main process (519) killed by TERM signal
[ 80.297433] Bluetooth: Core ver 2.17
[ 80.298139] NET: Registered protocol family 31
[ 80.298145] Bluetooth: HCI device and connection manager initialized
[ 80.298663] Bluetooth: HCI socket layer initialized
[ 80.298669] Bluetooth: L2CAP socket layer initialized
[ 80.298678] Bluetooth: SCO socket layer initialized
[ 80.326578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 80.326585] Bluetooth: BNEP filters: protocol multicast
[ 80.326597] Bluetooth: BNEP socket layer initialized
[ 80.339674] Bluetooth: RFCOMM TTY layer initialized
[ 80.339691] Bluetooth: RFCOMM socket layer initialized
[ 80.339703] Bluetooth: RFCOMM ver 1.11
[ 80.737266] init: cups main process (644) killed by HUP signal
[ 80.737281] init: cups main process ended, respawning
[ 81.727162] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 83.071336] audit_printk_skb: 120 callbacks suppressed
[ 83.071341] type=1400 audit(1424720611.553:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=964 comm="apparmor_parser"
[ 117.267205] type=1400 audit(1424720645.750:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2375 comm="apparmor_parser"
[ 117.267218] type=1400 audit(1424720645.750:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2375 comm="apparmor_parser"
[ 117.267830] type=1400 audit(1424720645.750:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2375 comm="apparmor_parser"
[ 128.848121] init: plymouth-upstart-bridge main process ended, respawning
[ 128.865491] init: plymouth-upstart-bridge main process (2447) terminated with status 1
[ 128.865509] init: plymouth-upstart-bridge main process ended, respawning
[ 156.956110] tsc: Marking TSC unstable due to cpufreq changes
[ 156.956206] Switched to clocksource acpi_pmDernière modification par fgi (Le 23/02/2015, à 22:03)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#18 Le 24/02/2015, à 00:27
- moko138
Re : [Résolu]Temps de boot 14.04
N'INSTALLE NI NE FORMATE CE DISQUE AVANT D'AVOIR SAUVEGARDÉ.
CE BARRACUDA AGONISE. Détails demain.
1) Le formatage a l'inconvénient d'effacer la liste des secteurs défectueux.
2) L'installation est une épreuve pour un disque.
Ne fais pas courir ce 3.000 mètres steeple à ton arthritique.
Ou alors comme exercice dont tu sais désormais qu'il peut lui être fatal.
Donc...
PRIMO, SAUVEGARDER !
En attendant, NE L'ÉTEINS QU'UNE FOIS PAR JOUR.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 24/02/2015, à 12:07
- fgi
Re : [Résolu]Temps de boot 14.04
La sauvegarde est faite depuis hier
Ca va être sport pour trouver un disque ATA neuf ... pas sûr que ça se vende encore. Je vais demander à mon ami eBay ...
Hier j'ai préparé ma live USB avec xubuntu 32, je suis donc paré de ce coté là.
En attendant, ne pas éteindre, ça va faire tourner Boinc
(et merci encore pour le temps que tu passes sur mon ordi )
Dernière modification par fgi (Le 24/02/2015, à 12:08)
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#20 Le 24/02/2015, à 12:58
- alca94
Re : [Résolu]Temps de boot 14.04
Ca va être sport pour trouver un disque ATA neuf ... pas sûr que ça se vende encore.
pourquoi vous dîtes ça il n'y a que l'embarras du choix en SATA 3 ou 6 gb/s ,ce serai du IDE je ne dis pas que ce serai pas corsé
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#21 Le 24/02/2015, à 13:03
- moko138
Re : [Résolu]Temps de boot 14.04
La sauvegarde est faite depuis hier
Ouf ! Très bien ! Tu n'as rien oublié dans les home de sda1 et sda4 ? (Pour chaque usager de 10.04 et 14.04, Bureaux/Desktops, messageries, favoris des navigateurs... ?)
Ca va être sport pour trouver un disque ATA neuf ... pas sûr que ça se vende encore. Je vais demander à mon ami eBay
1) Je suppose que tu voulais dire Pata ("Parallel ata", par opposition à Sata-"Serial ata").
Mais tu as cité :
root@ubuntu:/home/ubuntu# udisks --show-info /dev/sda
(...)
by-id: /dev/disk/by-id/scsi-SATA_ST3200822AS_4LJ1G3QWDonc si udisks ne s'est pas trompé, il te faut un disque Sata tout ce qu'il y a de banal !
Tu en auras le coeur net en rouvrant ta tour.
Je suppose que l'aficionado du modem 9K, avec ou sans "BBS", sait distinguer les connecteurs Sata des Pata au premier coup d'oeil
2) Il te faut un disque en excellent état ; autant en prendre un neuf !
Au fait, avant de partir au marché, tu nous fais un
sudo smartctl -a /dev/sd<X>sur ton DDE ? Des fois que...
Pour info, je rappelle le conseil de l'expérimenté PPdM :
pour un DDE, acheter séparément le disque et le boîtier.
Et en effet, ça permet d'être certain qu'ils sont désolidarisables, qu'on ne te fourgue pas une interface à la mormoil, et de choisir marque et surtout modèle de disque, puisqu'à l'intérieur d'une marque, tous ne se valent pas ! Cf. ./viewtopic.php?pid=16222871#p16222871
Donc pour un disque interne aussi, le modèle ne doit pas être acheté au petit bonheur !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 24/02/2015, à 18:53
- fgi
Re : [Résolu]Temps de boot 14.04
Vous avez raison, c'est bien du SATA. Allez savoir pourquoi j'avais en tête de l'IDE... Du coup je vais peut-être m'offrir du SSD pour l'OS. Ça urge : les lenteurs augmentent et le shutdown plantouille...
Moko138 que lis tu dans le marc de café de mon DD ?
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#23 Le 24/02/2015, à 19:37
- Bougron
Re : [Résolu]Temps de boot 14.04
Bonjour
Je pense que moko138 t'en dira plus que moi.
Mais il y a cela dans le smartctl
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 056 043 006 Pre-fail Always - 77055099
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 218771521
195 Hardware_ECC_Recovered 0x001a 056 043 000 Old_age Always - 77055099Je dirais qu'avec 77 millions d'erreurs de type 1 tu dois avoir un record!
Il y a aussi un beau cumul à 218 millions......
Pour explication http://fr.wikipedia.org/wiki/Self-Monit … Technology
Cependant ton disque me semblait par ailleurs en bon état pour d'autres éléments malgré son âge
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5710
5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always - 264
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8936
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5972
194 Temperature_Celsius 0x0022 042 054 000 Old_age Always - 42
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
Error 2 occurred at disk power-on lifetime: 8936 hours (372 days + 8 hours)
Error 1 occurred at disk power-on lifetime: 8798 hours (366 days + 14 hours)A croire qu'il y a 8 jours, il s'est passé un drôle d'événement que le nettoyage a aggravé?
Dernière modification par Bougron (Le 24/02/2015, à 21:57)
Hors ligne
#24 Le 24/02/2015, à 23:18
- fgi
Re : [Résolu]Temps de boot 14.04
Bougron a écrit :
A croire qu'il y a 8 jours, il s'est passé un drôle d'événement que le nettoyage a aggravé?
Le 18, ce qui ne fait pas tout à fait 8 jours, j'ai ouvert ma tour pour la nettoyer... avant, rien de notable, ce qui n'exclue pas qu'elle ait pu prendre un coup de pied de gamin pendant que l'ordi était allumé, ce sont des choses qui arrivent....
Je comprends en tout cas que ce disque est en fin de vie...
L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]
~ Ubuntu 22.04 64 bits ~
Hors ligne
#25 Le 25/02/2015, à 10:11
- moko138
Re : [Résolu]Temps de boot 14.04
Pour en savoir plus sur S.M.A.R.T. :
la Doc de notre site
Ébauche de tutoriel smart en français : http://lea-linux.org/documentations/Har … plus-smart
Description en anglais, moins incomplète : http://smartlinux.sourceforge.net/smart/attributes.php
fgi a écrit :
moko138 que lis tu dans le marc de café de mon DD ?
Bougron a écrit :
Je dirais qu'avec 77 millions d'erreurs de type 1 tu dois avoir un record!
Il y a aussi un beau cumul à 218 millions...
Ça oui !
Cependant ton disque me semblait par ailleurs en bon état pour d'autres éléments malgré son âge
Hé, oui. À première vue les infos étaient contradictoires :
9.000 heures, ce n'est pas vieux, et
197 Current_Pending_Sector 0
198 Offline_Uncorrectable 0ça paraissait bon.
D'ailleurs ces valeurs, si elles sont vraies, et je pense qu'elles le sont puisque tu n'as signalé (mais j'aurais dû vérifier...) aucune "splicing error" pendant les sauvegardes, excluent que ton disque ait reçu en fonctionnement un coup de pied : les enfants sont hors de cause
Alors j'espérais que les nombres records étaient de ces valeurs aberrantes parfois affichées par SMART. Et là il y en a :
3 Spin_Up_Time 0# temps (en ms) de mise en rotationEt il y a l'absence de la ligne 193 : le nombre de parcages du bras.
Il reste :
- que ton disque a accompli 3,8 milliards de tours à une température mal limitée (42 °C au moment du test)
- qu'il est donc vraisemblable qu'il a souvent fonctionné en surchauffe,
- qu'il a fallu exécuter, le 21/2 :
sudo smartctl -s on -o on -S on /dev/sdapour obtenir des données et
SMART Enabled.
SMART Attribute Autosave Enabled.- que ceci traduit une usure de la surface :
5 Reallocated_Sector_Ct 264- que ceci traduit une grave usure de la mécanique :
7 Seek Error Rate 218771521 Frequency of errors appearance while positioningImagine que, chaque fois que tu veux saisir ta tasse, tu doives t'y reprendre à dix fois, parce que ton bras répondrait sans précision à ton cerveau : ton petit-déjeuner durerait 4 fois plus longtemps.
- que le rapport des lignes 12 sur 9
12 Power_Cycle_Count 5972 Number of complete start/stop cycles of hard disk
9 Power_On_Hours 8936 Nombre d'heures sous tension(j'arrondis à 6000/9000) signifie que la durée moyenne d'allumage du pc est de 1 heure et demie.
Sachant que ce qui use les composants électriques et électroniques, ce sont surtout les surtensions pendant l'allumage et pendant l'extinction, et qu'il y a sur cet ordi cinq utilisateurs familiaux susceptibles de se succéder, 1 heure et demie c'est une aberration !
En usage familial, on allume/éteint le pc une fois par jour !
Et, pour les jours où tout le monde est dehors : une fois éventuelle le matin et une fois le soir, point !
Sur ton prochain système il faudra installer de quoi contrôler la température et les disques :
hddtemp, hdparm, laptop-mode-tools (qui n'est pas réservé aux portables), lmsensors, psensor, smartmontools,
et l'appliquer à ton disque neuf et à ton DDE !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne