Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 05/03/2015, à 22:48

Major Grubert

[Résolu] Installer Ubuntu en EFI en mono-boot

Salut

L'ordi de mon fils déconnant sous windows je suis autorisé à installer ubuntu en monoboot

Voici le boot info

http://paste.ubuntu.com/10543273/

Que dois-je garder ?
Que puis-je virer ?

Merci d'avance

Dernière modification par Major Grubert (Le 06/03/2015, à 09:49)


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#2 Le 05/03/2015, à 23:03

shoot76

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bonjour big_smile

Désolé je peux pas m'empêcher ... être autorisé par son fils c'est quand même rigolo ^^
Bref, tu peux retirer toutes les partitions labellisées Windows8, autrement dit celle qui sont en format NTFS smile

Bonne soirée


~ Data-sientist freelance : https://skulder.fr

Hors ligne

#3 Le 05/03/2015, à 23:10

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Et les autres qui traînent ?
La première doit être la partition EFI nécessaire, mais ne puis-je virer TOUTES les autres ?
L'idée serait d'installer le système sur le mini ssd de 24 Go (sdb), et de mettre le swap et le /home sur le DD de 750 Go (sda) juste derrière la partition EFI.
Ça peut le faire ainsi ?

Pour mon fiston, comme c'est son ordinateur et qu'il est majeur...

Dernière modification par Major Grubert (Le 05/03/2015, à 23:12)


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#4 Le 05/03/2015, à 23:44

shoot76

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Pour ta dernière phrase, c'était une boutade smile je suis "jeune" aussi et je n'accepterai pas que mon père me formate mon PC sans autorisation. Mais n'empêche que ça m'a fait rire.

Bref pour ta question, oui c'est totalement possible, c'est ce que j'ai sur le mien smile
Pour ta partition UEFI, je pense même que tu dois pouvoir la supprimer mais je veux pas dire de bétises. Si on regarde ta partition de démarrage (la première), le MBR pointe vers /dev/sdc qui est une partition Linux avec Syslinux... Alors la logique voudrait qu'on s'en tamponne le sauciflard de Windows. Mais encore une fois, je veux pas trop te dire de bétises, ces partitions sont petites, si tu as un doute vaut mieux perdre un peu de place que de perdre les données de ton fiston hmm


~ Data-sientist freelance : https://skulder.fr

Hors ligne

#5 Le 05/03/2015, à 23:46

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Le sdc c'est la clé USB-live tongue


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#6 Le 06/03/2015, à 00:33

Babdu89

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bonsoir.

Pour ta partition UEFI, je pense même que tu dois pouvoir la supprimer mais je veux pas dire de bétises.

Justement c'est une bêtise que de la supprimer, la machine va démarrer comment?
Les installations en UEFI,on besoins de cette partition pour démarrer.

Pour le MBR...

 => No boot loader is installed in the MBR of /dev/sda.

Le système recherche la seule partition /boot/efi qui doit être présente dans la config, même avec un multi boot multi disque. Une seule partition /boot/efi .

Un conseil, voir tous les tutos et intervention de malbo.

Pour la manip envisagée. Je ne suis pas du tout spécialiste du démarrage des installations en UEFI.

Je vais continuer de suivre, pour savoir comment çà se passe.

Sans être sûr du résultat à 100% !!!.

Je pense que l'on peut supprimer les partition Windows, si c'est ce que l'on veut. Puis depuis Ubuntu faire une mise à jour de grub-efi.

sudo update-grub

Mais je ne sais si çà sera suffisant à faire disparaître les traces de Windows dans la partition /boot/efi  /sda1 .
Et surtout conserver le lancement de Ubuntu.

Il vaut mieux avoir la confirmation d'experts en mode UEFI.

@+.   Babdu89  .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#7 Le 06/03/2015, à 01:00

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

La partition (enfin les 3 : /, swap et /home) pour Ubuntu sont temporaires : c'était pour faire un essai.
Je peux tout réinstaller, il n'y a plus aucune data sur l'ordi.
Ce sont les "minis" partitions, la partition windows, les partitions recovery (qui n'ont pas fonctionné) que je voudrai supprimer.
Malbo est dans le parages pour un conseil ?


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#8 Le 06/03/2015, à 01:01

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bonsoir
Je confirme ce que dit babdu89
Cette partition est absolument nécessaire..

sda1: __________________________________________________________________________
    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

Personnellement, je ne comprends pas pourquoi tu veux virer un OS que tu as acheté!!
S'il prend trop de place on peut diminuer sa taille.
Tu l'auras compris, j'adore la ceinture et les bretelles, pourtant cela ne suffit pas toujours..

PS: Il y a longtemps que la partition recovery (SDA7) aurait du être sauvegardée ailleurs en prévision d'une erreur de manipulation sur le disque ou d'une panne du disque!:

Dernière modification par Bougron (Le 06/03/2015, à 01:24)

Hors ligne

#9 Le 06/03/2015, à 01:04

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Parce que l'ordi met 2h30 à démarrer sous Windows (ce n'est pas une exagération) et plante ensuite en permanence.


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#10 Le 06/03/2015, à 01:20

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bonsoir
Cela marche-t-il mieux sous ubuntu?
Si toutes les machines qui fonctionnent sous windows mettaient ce temps à démarrer, je doute que son PDG aurait fini milliardaire.
Lorsque tu auras lancé ubuntu, installe l'application "smartctl" afin qu'on voit l'état du disque.
Cette application est dans la logithèque et s'appelle gsmartcontrol

Dernière modification par Bougron (Le 06/03/2015, à 01:31)

Hors ligne

#11 Le 06/03/2015, à 01:33

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Oui ça marche normalement sous Ubuntu.

Ça doit être un problème logiciel sous Windows mais impossible de trouver le problème (il peut accélérer le lancement en passant par la liste des tâches et en lançant à la main explorer... mais depuis quelques jours, en plus de ce problème, le système est instable et plante toutes les 10 min... bref une cata ; j'ai cherché pendant une semaine la source du problème sans la trouver : pas de virus, pas de malware, j'ai viré un max de programmes, mais ça n'a rien changé).


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#12 Le 06/03/2015, à 01:34

Babdu89

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Je pense que oui... Puisqu'ils veulent, après test installer Ubuntu seul.

Si la machine était à moi, je relancerais la session live Ubuntu en UEFI comme pour le test.
Et j'installerais Ubuntu .
À l'étape " Allouer de l'espace disque" . Je choisirais "Installer sur tout le disque"
Et je laisserais l'installateur faire son boulot. Il va virer Windows et installer Ubuntu comme il faut en mode UEFI.

@ Bougron
J'ai encore bon?.  wink

@+.  Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#13 Le 06/03/2015, à 01:38

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Oui sauf que je veux contrôler un peu ce qu'il fait :
/ sur le ssd (sdb)
swap sur le DD (sda)
/home sur le DD (sda)

Je veux juste avoir une confirmation que je peux tout virer sauf la sda1 montée en /boot/efi de quelqu'un qui est sûr de ce qu'il dit.


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#14 Le 06/03/2015, à 02:02

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Babdu89 a écrit :

Je pense que oui... Puisqu'ils veulent, après test installer Ubuntu seul.

Si la machine était à moi, je relancerais la session live Ubuntu en UEFI comme pour le test.
Et j'installerais Ubuntu .
À l'étape " Allouer de l'espace disque" . Je choisirais "Installer sur tout le disque"
Et je laisserais l'installateur faire son boulot. Il va virer Windows et installer Ubuntu comme il faut en mode UEFI.

@ Bougron
J'ai encore bon?.  wink

@+.  Babdu89   .

Oh que oui avec la version 14.04.1 qui ne sait pas reconnaître la présence de windows!
Avec la version 14.04.2,  la grille d'accueil est celle-ci  http://www.hostingpics.net/viewer.php?i … er5205.jpg

@major grubert
Si le disque est pourri, ce n'est pas ubuntu qui le remettra en état!
Le logiciel smartctl qui existe avec ubuntu et windows pourrait infirmer ou confirmer.
Cependant, ce que j'ai vu du boot-info montre que ubuntu pourrait booter. Dans ce cas, il n'y a pas lieu de le réinstaller.
D'abord, installer smartctl qui est dans la logithèque sous le nom gsmartcontrol et constater si je me trompe.

Dernière modification par Bougron (Le 06/03/2015, à 02:03)

Hors ligne

#15 Le 06/03/2015, à 02:13

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Major Grubert a écrit :

Oui sauf que je veux contrôler un peu ce qu'il fait :
/ sur le ssd (sdb)
swap sur le DD (sda)
/home sur le DD (sda)

Je veux juste avoir une confirmation que je peux tout virer sauf la sda1 montée en /boot/efi de quelqu'un qui est sûr de ce qu'il dit.

Bonsoir
Tu peux prendre l'option "autre chose" afin de choisir précisément ou tu veux déposer les trois partitions. (Ton choix me semble judicieux).
Cependant, comme ton ubuntu semble installé et fonctionnel, installe smartctl et fais la commande
sudo smartctl -a /dev/sda

Smartctl est  aussi disponible sous windows

Ajout de dernière minute, au vu de ton boot-info (s'il est encore valable)

=================== efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0004,0000,0003,0002
Boot0000* Windows Boot Manager    HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu    HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIubuntushimx64.efi)
Boot0003* ubuntu    HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIUbuntugrubx64.efi)
Boot0004* UEFI: Corsair Flash Voyager 1100    ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(3,0)HD(1,3f,f4ffc1,00093969)..BO

Tu ne peux pas booter automatiquement sur ubuntu
  En premier la clé USB
  En second Windows
  En troisième Ubuntu standard
  En quatrième ubuntu sécurisé

=> Cela me fais très peur. Certains bios ne savent lancer que WINDOWS!!!!
   Si tu ne bootes pas sur ubuntu tu peux tenter la réparation recommandée

=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda6, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file

Dernière modification par Bougron (Le 06/03/2015, à 02:36)

Hors ligne

#16 Le 06/03/2015, à 02:32

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Ajout pour Malbo.
Bonsoir.
Je ne sais pas si tu connais déjà la nouveauté,  Boot-repair devient civilisé, il respecte désormais windows!!!

=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda6, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file

Il n'y a plus de renommage du fichier de boot de windows proposé!!

Hors ligne

#17 Le 06/03/2015, à 08:11

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Merci pour vos réponses.
Je vais installer smartctl pour voir ça.

Des précisions :
. Ubuntu est installé et fonctionnel mais je cherche à refaire l'installation pour virer totalement Windows et récupérer les partitions non indispensables
. La data d'origine est déjà sauvegardée, tout peut être effacé


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#18 Le 06/03/2015, à 08:48

malbo

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Ton Boot-Info dont tu as donné le lien dans le post #1 :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.2 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda7: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''
mount: unknown filesystem type ''

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1971920 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       616,447       614,400 EFI System partition
/dev/sda2         616,448     2,459,647     1,843,200 Windows Recovery Environment (Windows)
/dev/sda3       2,459,648     2,721,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       2,721,792   587,857,919   585,136,128 Data partition (Windows/Linux)
/dev/sda5     587,857,920   588,779,519       921,600 Windows Recovery Environment (Windows)
/dev/sda6     588,779,520   627,841,023    39,061,504 Data partition (Linux)
/dev/sda7   1,423,183,872 1,465,147,391    41,963,520 Windows Recovery Environment (Windows)
/dev/sda8     627,841,024   645,419,007    17,577,984 Swap partition (Linux)
/dev/sda9     645,419,008 1,423,183,871   777,764,864 Data partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 24.0 GB, 24015495168 bytes
255 heads, 63 sectors/track, 2919 cylinders, total 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048    46,903,295    46,901,248  73 Unknown


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 8220 MB, 8220835840 bytes
118 heads, 14 sectors/track, 9719 cylinders, total 16056320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             63    16,056,319    16,056,257   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        3478-C59B                              vfat       SYSTEM
/dev/sda2        0428443F284431CA                       ntfs       Recovery
/dev/sda4        84FC47D8FC47C2E2                       ntfs       OS
/dev/sda5        B6B6D715B6D6D4C9                       ntfs       
/dev/sda6        12b2d77b-7f82-461e-b0d9-15dab307afdc   ext4       
/dev/sda7        CC544B89544B74EC                       ntfs       Restore
/dev/sda8        b1fd3c2f-2928-4f72-a480-38fa9342d494   swap       
/dev/sda9        788a0cdc-6a50-4b1f-b28c-f21a1a1c8331   ext4       
/dev/sdc1        382D-2645                              vfat       MYLINUXLIVE

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Mar  5  2015 ata-HL-DT-ST_DVDRAM_GU71N_KO4D2865401 -> ../../sr0
lrwxrwxrwx 1 root root  9 Mar  5 20:42 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar  5 20:35 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar  5 20:42 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar  5  2015 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar  5 20:42 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Mar  5 20:42 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Mar  5  2015 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Mar  5 20:42 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Mar  5  2015 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Mar  5  2015 ata-ST750LM022_HN-M750MBB_S2Y7J9CD600241-part9 -> ../../sda9
lrwxrwxrwx 1 root root  9 Mar  5 20:42 ata-SanDisk_SSD_U100_24GB_132073401956 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar  5  2015 ata-SanDisk_SSD_U100_24GB_132073401956-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Mar  5 20:42 usb-Corsair_Flash_Voyager_AA04012700007449-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Mar  5 20:35 usb-Corsair_Flash_Voyager_AA04012700007449-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Mar  5 20:42 wwn-0x50004cf20a75e62e -> ../../sda
lrwxrwxrwx 1 root root 10 Mar  5 20:35 wwn-0x50004cf20a75e62e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar  5 20:42 wwn-0x50004cf20a75e62e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar  5  2015 wwn-0x50004cf20a75e62e-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar  5 20:42 wwn-0x50004cf20a75e62e-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Mar  5 20:42 wwn-0x50004cf20a75e62e-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Mar  5  2015 wwn-0x50004cf20a75e62e-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Mar  5 20:42 wwn-0x50004cf20a75e62e-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Mar  5  2015 wwn-0x50004cf20a75e62e-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Mar  5  2015 wwn-0x50004cf20a75e62e-part9 -> ../../sda9
lrwxrwxrwx 1 root root  9 Mar  5  2015 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Mar  5 20:42 wwn-0x5001b449cbc52a64 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar  5  2015 wwn-0x5001b449cbc52a64-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdc1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
else
  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 45,51,53; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
	else
	  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
	fi
	linux	/boot/vmlinuz-3.16.0-31-generic.efi.signed root=UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.16.0-31-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
	menuentry 'Ubuntu, avec Linux 3.16.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-31-generic-advanced-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
		else
		  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
		fi
		echo	'Chargement de Linux 3.16.0-31-generic…'
		linux	/boot/vmlinuz-3.16.0-31-generic.efi.signed root=UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.16.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 3.16.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-31-generic-recovery-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
		else
		  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
		fi
		echo	'Chargement de Linux 3.16.0-31-generic…'
		linux	/boot/vmlinuz-3.16.0-31-generic.efi.signed root=UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.16.0-31-generic
	}
	menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
		else
		  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
		fi
		echo	'Chargement de Linux 3.16.0-30-generic…'
		linux	/boot/vmlinuz-3.16.0-30-generic root=UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.16.0-30-generic
	}
	menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-12b2d77b-7f82-461e-b0d9-15dab307afdc' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  12b2d77b-7f82-461e-b0d9-15dab307afdc
		else
		  search --no-floppy --fs-uuid --set=root 12b2d77b-7f82-461e-b0d9-15dab307afdc
		fi
		echo	'Chargement de Linux 3.16.0-30-generic…'
		linux	/boot/vmlinuz-3.16.0-30-generic root=UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.16.0-30-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-3478-C59B' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  3478-C59B
	else
	  search --no-floppy --fs-uuid --set=root 3478-C59B
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=12b2d77b-7f82-461e-b0d9-15dab307afdc /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=3478-C59B  /boot/efi       vfat    defaults        0       1
# /home was on /dev/sda9 during installation
UUID=788a0cdc-6a50-4b1f-b28c-f21a1a1c8331 /home           ext4    defaults        0       2
# /windows was on /dev/sda4 during installation
UUID=84FC47D8FC47C2E2 /windows        ntfs    defaults,umask=007,gid=46 0       0
# swap was on /dev/sda8 during installation
UUID=b1fd3c2f-2928-4f72-a480-38fa9342d494 none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu GNOME without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu-gnome.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu GNOME" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu-gnome.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu-gnome.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdc1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/4719/mounts) leaked on lvs invocation. Parent PID 15032: bash
File descriptor 63 (pipe:[49215]) leaked on lvs invocation. Parent PID 15032: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-03-05__20h42 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu-gnome.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda6:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEM" UUID="3478-C59B" TYPE="vfat"
/dev/sda2: LABEL="Recovery" UUID="0428443F284431CA" TYPE="ntfs"
/dev/sda4: LABEL="OS" UUID="84FC47D8FC47C2E2" TYPE="ntfs"
/dev/sda5: UUID="B6B6D715B6D6D4C9" TYPE="ntfs"
/dev/sda6: UUID="12b2d77b-7f82-461e-b0d9-15dab307afdc" TYPE="ext4"
/dev/sda7: LABEL="Restore" UUID="CC544B89544B74EC" TYPE="ntfs"
/dev/sda8: UUID="b1fd3c2f-2928-4f72-a480-38fa9342d494" TYPE="swap"
/dev/sda9: UUID="788a0cdc-6a50-4b1f-b28c-f21a1a1c8331" TYPE="ext4"
/dev/sdc1: LABEL="MYLINUXLIVE" UUID="382D-2645" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi

=================== sda6/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Feb 18 19:36 grub.d
total 76
-rwxr-xr-x 1 root root  9424 May 15  2014 00_header
-rwxr-xr-x 1 root root  6058 May  8  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15  2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 Mar 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 May 15  2014 30_os-prober
-rwxr-xr-x 1 root root  1416 May 15  2014 30_uefi-firmware
-rwxr-xr-x 1 root root   214 May 15  2014 40_custom
-rwxr-xr-x 1 root root   216 May 15  2014 41_custom
-rw-r--r-- 1 root root   483 May 15  2014 README




=================== sda6/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda6: UUID=3478-C59B   (sda1)

=================== efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0004,0000,0003,0002
Boot0000* Windows Boot Manager	HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu	HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIubuntushimx64.efi)
Boot0003* ubuntu	HD(1,800,96000,01f9031f-4dc3-45f8-a77a-a217e12be63d)File(EFIUbuntugrubx64.efi)
Boot0004* UEFI: Corsair Flash Voyager 1100	ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(3,0)HD(1,3f,f4ffc1,00093969)..BO

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sda6	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda6.
sda7	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda7.
sda9	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda9.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name                          Flags
1      1049kB  316MB   315MB   fat32           EFI system partition          boot
2      316MB   1259MB  944MB   ntfs            Basic data partition          hidden, diag
3      1259MB  1394MB  134MB                   Microsoft reserved partition  msftres
4      1394MB  301GB   300GB   ntfs            Basic data partition          msftdata
5      301GB   301GB   472MB   ntfs                                          hidden, diag
6      301GB   321GB   20.0GB  ext4
8      321GB   330GB   9000MB  linux-swap(v1)
9      330GB   729GB   398GB   ext4
7      729GB   750GB   21.5GB  ntfs            Basic data partition          hidden, diag


Model: ATA SanDisk SSD U100 (scsi)
Disk /dev/sdb: 24.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  24.0GB  24.0GB  primary


Model: Corsair Flash Voyager (scsi)
Disk /dev/sdc: 8221MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  8221MB  8221MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:750GB:scsi:512:4096:gpt:ATA ST750LM022 HN-M7;
1:1049kB:316MB:315MB:fat32:EFI system partition:boot;
2:316MB:1259MB:944MB:ntfs:Basic data partition:hidden, diag;
3:1259MB:1394MB:134MB::Microsoft reserved partition:msftres;
4:1394MB:301GB:300GB:ntfs:Basic data partition:msftdata;
5:301GB:301GB:472MB:ntfs::hidden, diag;
6:301GB:321GB:20.0GB:ext4::;
8:321GB:330GB:9000MB:linux-swap(v1)::;
9:330GB:729GB:398GB:ext4::;
7:729GB:750GB:21.5GB:ntfs:Basic data partition:hidden, diag;

BYT;
/dev/sdb:24.0GB:scsi:512:512:msdos:ATA SanDisk SSD U100;
1:1049kB:24.0GB:24.0GB:::;

BYT;
/dev/sdc:8221MB:scsi:512:512:msdos:Corsair Flash Voyager;
1:32.3kB:8221MB:8221MB:fat32::boot;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL    MODEL    UUID
sda   disk          698.7G          ST750LM0
sda1  part vfat       300M SYSTEM            3478-C59B
sda2  part ntfs       900M Recovery          0428443F284431CA
sda3  part            128M
sda4  part ntfs       279G OS                84FC47D8FC47C2E2
sda5  part ntfs       450M                   B6B6D715B6D6D4C9
sda6  part ext4      18.6G                   12b2d77b-7f82-461e-b0d9-15dab307afdc
sda7  part ntfs        20G Restore           CC544B89544B74EC
sda8  part swap       8.4G                   b1fd3c2f-2928-4f72-a480-38fa9342d494
sda9  part ext4     370.9G                   788a0cdc-6a50-4b1f-b28c-f21a1a1c8331
sdb   disk           22.4G          SanDisk
sdb1  part           22.4G
sdc   disk            7.7G          Flash Vo
sdc1  part vfat       7.7G MYLINUXLIVE
382D-2645
sr0   rom            1024M          DVDRAM G
loop0 loop squashfs 904.2M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         /mnt/boot-sav/sda6
sda7     1  0  0         /mnt/boot-sav/sda7
sda8     1  0  0         [SWAP]
sda9     1  0  0         /mnt/boot-sav/sda9
sdb      0  0  0 running
sdb1     0  0  0
sdc      1  0  1 running
sdc1     1  0  1         /cdrom
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu-gnome)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda9 on /mnt/boot-sav/sda9 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg kvm log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 9b c5 78 34 4e  4f 20 4e 41 4d 45 20 20  |..)..x4NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200
ls sda2/efi:
ls sda2: AsFac.log
AsPartition.ini
AsTCDProc_20130627195942.log
AsTCDProc_20130627211854.log
AsToolCDVer.txt
AsTool.state
Boot
bootmgr
bootmgr.efi
DetectResult.ini
EFI
en-us
FAC1_dism.log
FAC3_dism.log
FACLog
OEM
PASS.txt
PQA.CMD
Recovery
Recovery.txt
Sources
SWPackage.ini
System Volume Information  . Please report this message to boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 68 09 00  |........?....h..|
00000020  00 00 00 00 80 00 80 00  ff 1f 1c 00 00 00 00 00  |................|
00000030  00 2c 01 00 00 00 00 00  02 00 00 00 00 00 00 00  |.,..............|
00000040  f6 00 00 00 01 00 00 00  ca 31 44 28 3f 44 28 04  |.........1D(?D(.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 29 00  |........?.....).|
00000020  00 00 00 00 80 00 80 00  ff 77 e0 22 00 00 00 00  |.........w."....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  e2 c2 47 fc d8 47 fc 84  |..........G..G..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 0a 23  |........?......#|
00000020  00 00 00 00 80 00 80 00  ff 0f 0e 00 00 00 00 00  |................|
00000030  00 96 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  c9 d4 d6 b6 15 d7 b6 b6  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda7
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 10 d4 54  |........?......T|
00000020  00 00 00 00 80 00 80 00  ff 4f 80 02 00 00 00 00  |.........O......|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  ec 74 4b 54 89 4b 54 cc  |.........tKT.KT.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.9G  189M  1.7G  10% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      384M  1.6M  383M   1% /run
/dev/sdc1      vfat       7.7G  947M  6.8G  13% /cdrom
/dev/loop0     squashfs   905M  905M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G   12K  1.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.9G   84K  1.9G   1% /run/shm
none           tmpfs      100M   40K  100M   1% /run/user
/dev/sda1      vfat       296M   30M  267M  10% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    900M  377M  524M  42% /mnt/boot-sav/sda2
/dev/sda4      fuseblk    280G  193G   87G  69% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    450M  269M  182M  60% /mnt/boot-sav/sda5
/dev/sda6      ext4        19G  4.6G   13G  27% /mnt/boot-sav/sda6
/dev/sda7      fuseblk     21G   14G  6.7G  67% /mnt/boot-sav/sda7
/dev/sda9      ext4       365G  208M  347G   1% /mnt/boot-sav/sda9

=================== fdisk -l:

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x3e1ab738

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1465149167   732574583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 24.0 GB, 24015495168 bytes
255 heads, 63 sectors/track, 2919 cylinders, total 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x74f02dea

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    46903295    23450624   73  Unknown

Disk /dev/sdc: 8220 MB, 8220835840 bytes
118 heads, 14 sectors/track, 9719 cylinders, total 16056320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00093969

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63    16056319     8028128+   b  W95 FAT32




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda6, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair


If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.
Major Grubert a écrit :

Oui sauf que je veux contrôler un peu ce qu'il fait :
/ sur le ssd (sdb)
swap sur le DD (sda)
/home sur le DD (sda)

Je veux juste avoir une confirmation que je peux tout virer sauf la sda1 montée en /boot/efi de quelqu'un qui est sûr de ce qu'il dit.

Oui, tu peux supprimer toutes les partitions sauf sda1 qui est la partition EFI. Pendant l'installation, tu n'auras rien à faire de particulier s'agissant de sda1 parce que l'installateur de Ubuntu sait ce qu'il a à faire avec une partition EFI. J'ai vu que tu as modifié la table de partition du SSD : à l'origine elle devait être du type GPT et tu l'as passée en type MSDOS. Je pense que ça ne doit pas perturber l'installation et que tu peux laisser en type MSDOS.
Quand l'installation sera faite et fonctionnelle, tu pourras virer les traces de Windows qui sont dans la partition sda1 (à faire depuis ta session Ubuntu).

EDIT : j'ai vu ton post dans l'autre discussion : http://forum.ubuntu-fr.org/viewtopic.ph … #p19366991

Dernière modification par malbo (Le 06/03/2015, à 09:48)

Hors ligne

#19 Le 06/03/2015, à 09:11

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bizarre, je ne me rappelle pas avoir modifié le type de table (peut-être quand j'ai bidouillé les partitions en choisissant principale/logique ?).

Et si je vire tout, l'installateur Ubuntu ne crée pas automatiquement une partition EFI dans la partition racine ou son équivalent ?


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#20 Le 06/03/2015, à 09:43

malbo

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Si tu vires tout, il faudra créer manuellement une partition EFI. Pour ce faire, tu pourras utiliser Gparted, lui demander de créer une partition FAT32 de 250Mo puis quand c'est fait, lui coller le drapeau "boot" (toujours avec Gparted). Oui mais pourquoi s'emmerder à recréer cette partition EFI alors qu'elle existe déjà et qu'elle est prête à servir pour ta future install ?
Quant à mon hypothèse sur la table de partition du SSD, c'est peut-être moi qui me trompe. S'il s'avère que ton installation ne fonctionne pas comme ça, tu pourras créer une table de partition GPT (au lieu de l'actuelle MSDOS) pour ton SSD et voir si ça règle le problème.

Hors ligne

#21 Le 06/03/2015, à 09:48

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

En fait je n'ai rien touché sur le SSD, il était comme ça d'origine.
OK je lance la réinstallation dès que smartctl a fini son examen (en utilisant la partition EFI déjà présente).
Je vous tiens au courant.
Merci à tous.


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#22 Le 07/03/2015, à 11:48

kholo

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

bonjour,
j'en profite pour apporter des précisions :
j'ai virer les protections du "BIOS" voir les tutos de Malbo et mon fil
(pour accéder au BIOS : appuie long sur le "." du pad au boot)
mis le SDD en premier
et rebooté pour vérifier -> plus de système (normal !)
ensuite DVD (ou clé usb) et installation sur sda (le SDD)
utiliser tout le disque,
l'installeur de Buntu m'a créé mes partitions !
- 1 part FAT de 210 Mo
- 1 part / 24 Go en Ext4

j'ai pas de SWAP (4Go suffisant pour ce que j'en fait)

avant je switchais dans le BIOS pour passer de DOZ à Buntu
mais, depuis quelque temps, Grub fait ça très bien et j'ai Windows depuis le menu

j'ai aussi monté une de mes partitions du HDD avec Fstab

voilà... c'est une bonne machine

Hors ligne

#23 Le 07/03/2015, à 12:10

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

L'installation s'est bien passée.
/ est sur le SSD de 24Go
/boot/EFI sur le DD (présente depuis l'origine)
swap de 9Go sur le DD au cas où (oui c'est bcp trop, je sais)
/home du reste (700+ Go) sur le DD

Au boot je vois un choix pour démarrer sous Windows, que je n'ai plus sur l'ordinateur.

J'ai fait un sudo update-grub (ou grub-update, je ne sais plus) pour mettre à jour le grub depuis Ubuntu, mais Windows est tjs présent dans les choix. Cela doit venir du fait qu'il est "déclaré" par sa présence dans la partition EFI.

Que dois-je modifier pour qu'il n’apparaisse plus ?


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#24 Le 07/03/2015, à 19:47

Bougron

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Bonjour
Pour virer la proposition windows,   voici une solution parmi une autre
   Avec le terminal,  tu vas dans le répertoire /boot/efi/EFI, tu fais la commande ls -l
   Tu devrais voir quelque chose de ce style:

bougron@S70t-A:/boot/efi/EFI$ ls -l
total 4
drwxr-xr-x 2 root root 1024 déc.   4 02:21 Boot
drwxr-xr-x 3 root root 1024 juin  23  2014 Microsoft
drwxr-xr-x 2 root root 2048 févr. 22 16:32 ubuntu
bougron@S70t-A:/boot/efi/EFI$ 

Tu supprimes le répertoire   Microsoft    Je pense que la commande    sudo rm -r Microsoft     doit faire la chose
et tu refais la commande sudo update-grub

Dernière modification par Bougron (Le 07/03/2015, à 19:50)

Hors ligne

#25 Le 08/03/2015, à 08:03

Major Grubert

Re : [Résolu] Installer Ubuntu en EFI en mono-boot

Ça marche.
Merci encore.


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne