Ubuntu-fr

sfouludo

Dongle GPS USB : GT-730FL-S non détecté.

Bonjour, la communauté.

Je possède une Clé USB GPS : GT-730FL-S et sans parler de logiciel, la clé n'est pas reconnu par mon pc alors que mes ports USB fonctionnent correctement. Je voudrais récupérer les donnée GPX enregistrer. Je suis sous Ubuntu 14.04 lts.
J'ai trouvé des drivers  compatible avec Linux (Redhat) sur se site : http://www.canadagps.com/CanmoreGT-730FL-S.html
Mais pas impossible de les exploiter.

Comment faire ?

Merci pour votre aide.

Dernière modification par sfouludo (Le 12/01/2015, à 15:55)

gl38

Re : Dongle GPS USB : GT-730FL-S non détecté.

Que dit dmesg (la fin) quand tu insères ta clé ?
Tu dois avoir déjà un module pl2303 dans les drivers du noyau.
Cordialement,
Guy

sfouludo

Re : Dongle GPS USB : GT-730FL-S non détecté.

Bonsoir gl38 la commande dmesg donne dans ça totalité :
J'ai tellement installé de chose que je ne comprend plus rien lol

[    0.403054] pci 0000:00:02.0: Video device with shadowed ROM
[    0.403342] PCI: CLS 64 bytes, default 64
[    0.403386] Trying to unpack rootfs image as initramfs...
[    0.757569] Freeing initrd memory: 26944K (ffff880034b50000 - ffff8800365a0000)
[    0.757574] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.757577] software IO TLB [mem 0xb6bc0000-0xbabc0000] (64MB) mapped at [ffff8800b6bc0000-ffff8800babbffff]
[    0.757741] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[    0.757745] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[    0.757785] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.757787] Scanning for low memory corruption every 60 seconds
[    0.757929] Initialise system trusted keyring
[    0.757964] audit: initializing netlink socket (disabled)
[    0.757973] type=2000 audit(1421077967.516:1): initialized
[    0.779458] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.780209] zbud: loaded
[    0.780317] VFS: Disk quotas dquot_6.5.2
[    0.780345] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.780634] fuse init (API version 7.22)
[    0.780686] msgmni has been set to 7722
[    0.780722] Key type big_key registered
[    0.780966] Key type asymmetric registered
[    0.780968] Asymmetric key parser 'x509' registered
[    0.780988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.781008] io scheduler noop registered
[    0.781009] io scheduler deadline registered (default)
[    0.781025] io scheduler cfq registered
[    0.781156] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.781226] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[    0.781326] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.781426] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.781496] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.781500] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.781514] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.781516] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.781519] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.781533] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.781534] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.781537] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.781551] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.781552] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.781555] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.781563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.781573] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.781599] efifb: probing for efifb
[    0.781793] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 1920k, total 1920k
[    0.781794] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.781795] efifb: scrolling: redraw
[    0.781796] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.782738] Console: switching to colour frame buffer device 100x37
[    0.783626] fb0: EFI VGA frame buffer device
[    0.783634] intel_idle: MWAIT substates: 0x1120
[    0.783635] intel_idle: v0.4 model 0x2A
[    0.783636] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.783674] ipmi message handler version 39.2
[    0.783720] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.783724] ACPI: Power Button [PWRB]
[    0.783748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.783750] ACPI: Power Button [PWRF]
[    0.783903] GHES: HEST is not enabled!
[    0.783958] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.804356] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.805544] Linux agpgart interface v0.103
[    0.806404] brd: module loaded
[    0.806853] loop: module loaded
[    0.806919] ata_piix 0000:00:1f.2: version 2.13
[    0.806971] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.960922] scsi0 : ata_piix
[    0.960981] scsi1 : ata_piix
[    0.961005] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[    0.961009] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[    0.961077] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.116269] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.116916] scsi2 : ata_piix
[    1.116964] scsi3 : ata_piix
[    1.116985] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.116986] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.117156] libphy: Fixed MDIO Bus: probed
[    1.117211] tun: Universal TUN/TAP device driver, 1.6
[    1.117211] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.117252] PPP generic driver version 2.4.2
[    1.117277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.117282] ehci-pci: EHCI PCI platform driver
[    1.117352] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.117357] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.117368] ehci-pci 0000:00:1a.0: debug port 2
[    1.121260] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.121274] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe606000
[    1.132266] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.132323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.132325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.132326] usb usb1: Product: EHCI Host Controller
[    1.132327] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[    1.132329] usb usb1: SerialNumber: 0000:00:1a.0
[    1.132477] hub 1-0:1.0: USB hub found
[    1.132484] hub 1-0:1.0: 2 ports detected
[    1.132608] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.132612] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.132623] ehci-pci 0000:00:1d.0: debug port 2
[    1.136523] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.136534] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe605000
[    1.148272] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.148322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.148324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148326] usb usb2: Product: EHCI Host Controller
[    1.148327] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[    1.148328] usb usb2: SerialNumber: 0000:00:1d.0
[    1.148472] hub 2-0:1.0: USB hub found
[    1.148479] hub 2-0:1.0: 2 ports detected
[    1.148546] ehci-platform: EHCI generic platform driver
[    1.148552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.148553] ohci-pci: OHCI PCI platform driver
[    1.148558] ohci-platform: OHCI generic platform driver
[    1.148562] uhci_hcd: USB Universal Host Controller Interface driver
[    1.148621] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.148624] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    1.153052] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    1.153058] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    1.153062] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    1.153140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.153141] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153143] usb usb3: Product: xHCI Host Controller
[    1.153144] usb usb3: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[    1.153145] usb usb3: SerialNumber: 0000:02:00.0
[    1.153277] hub 3-0:1.0: USB hub found
[    1.153287] hub 3-0:1.0: 2 ports detected
[    1.153343] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.153346] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    1.153383] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.153384] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153386] usb usb4: Product: xHCI Host Controller
[    1.153387] usb usb4: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[    1.153388] usb usb4: SerialNumber: 0000:02:00.0
[    1.153518] hub 4-0:1.0: USB hub found
[    1.153528] hub 4-0:1.0: 2 ports detected
[    1.160400] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.160740] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.160744] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.160950] mousedev: PS/2 mouse device common for all mice
[    1.161233] rtc_cmos 00:04: RTC can wake from S4
[    1.161383] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.161409] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.161455] device-mapper: uevent: version 1.0.3
[    1.161520] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.161525] ledtrig-cpu: registered to indicate activity on CPUs
[    1.161526] EFI Variables Facility v0.08 2004-May-17
[    1.204540] TCP: cubic registered
[    1.204598] NET: Registered protocol family 10
[    1.204717] NET: Registered protocol family 17
[    1.204724] Key type dns_resolver registered
[    1.204994] Loading compiled-in X.509 certificates
[    1.205757] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[    1.205769] registered taskstats version 1
[    1.207390] Key type trusted registered
[    1.208720] Key type encrypted registered
[    1.209900] AppArmor: AppArmor sha1 policy hashing enabled
[    1.209902] IMA: No TPM chip found, activating TPM-bypass!
[    1.210144] regulator-dummy: disabling
[    1.210167]   Magic number: 15:798:891
[    1.210240] rtc_cmos 00:04: setting system clock to 2015-01-12 15:52:48 UTC (1421077968)
[    1.210502] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.210503] EDD information not available.
[    1.210537] PM: Hibernation image not present or could not be loaded.
[    1.288473] ata4.00: ATAPI: ATAPI   iHAS124   C, LL02, max UDMA/100
[    1.304475] ata4.00: configured for UDMA/100
[    1.444427] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.576721] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.576726] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.577002] hub 1-1:1.0: USB hub found
[    1.577084] hub 1-1:1.0: 4 ports detected
[    1.688429] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.756434] tsc: Refined TSC clocksource calibration: 2893.427 MHz
[    1.820793] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.820797] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.821069] hub 2-1:1.0: USB hub found
[    1.821151] hub 2-1:1.0: 6 ports detected
[    1.892545] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.988498] ata2.00: failed to resume link (SControl 0)
[    2.013103] usb 1-1.1: New USB device found, idVendor=06f8, idProduct=3005
[    2.013108] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.013111] usb 1-1.1: Product: Hercules Dualpix Exchange
[    2.013114] usb 1-1.1: Manufacturer: Guillemot Corporation
[    2.088777] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[    2.185152] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c05a
[    2.185157] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.185160] usb 1-1.3: Product: USB Optical Mouse
[    2.185162] usb 1-1.3: Manufacturer: Logitech
[    2.256656] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[    2.308582] ata1.01: failed to resume link (SControl 0)
[    2.354430] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c31c
[    2.354435] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.354437] usb 2-1.5: Product: USB Keyboard
[    2.354439] usb 2-1.5: Manufacturer: Logitech
[    2.464683] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.464694] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.472865] ata1.00: ATA-7: Hitachi HDT725025VLA380, V5DOA7BA, max UDMA/133
[    2.472868] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.488870] ata1.00: configured for UDMA/133
[    2.489059] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[    2.489150] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.489212] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.489435] sd 0:0:0:0: [sda] Write Protect is off
[    2.489438] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.489529] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.504205]  sda: sda1
[    2.504382] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.756887] Switched to clocksource tsc
[    3.016767] ata2.01: failed to resume link (SControl 0)
[    3.027442] ata2.00: SATA link down (SStatus 4 SControl 0)
[    3.027454] ata2.01: SATA link down (SStatus 0 SControl 0)
[    3.030864] scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   C      LL02 PQ: 0 ANSI: 5
[    3.034834] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.034836] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.034956] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.035104] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    3.036370] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    3.036372] Write protecting the kernel read-only data: 12288k
[    3.038104] Freeing unused kernel memory: 796K (ffff880004739000 - ffff880004800000)
[    3.039516] Freeing unused kernel memory: 688K (ffff880004b54000 - ffff880004c00000)
[    3.049576] systemd-udevd[111]: starting version 204
[    3.064384] ahci 0000:04:00.0: version 3.0
[    3.064471] ahci 0000:04:00.0: irq 47 for MSI/MSI-X
[    3.064501] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
[    3.064538] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[    3.064540] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    3.066291] scsi4 : ahci
[    3.067278] scsi5 : ahci
[    3.067312] ata5: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400100 irq 47
[    3.067315] ata6: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400180 irq 47
[    3.075110] hidraw: raw HID events driver (C) Jiri Kosina
[    3.081030] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.082809] r8169 0000:03:00.0: irq 48 for MSI/MSI-X
[    3.082948] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000066e000, 8c:89:a5:c2:a2:98, XID 0c900800 IRQ 48
[    3.082950] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.083865] [drm] Initialized drm 1.1.0 20060810
[    3.107307] usbcore: registered new interface driver usbhid
[    3.107309] usbhid: USB HID core driver
[    3.115800] [drm] Memory usable by graphics device = 2048M
[    3.115804] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[    3.115805] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    3.115817] Console: switching to colour dummy device 80x25
[    3.116366] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[    3.118932] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.3/input0
[    3.119039] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[    3.119086] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
[    3.120738] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input7
[    3.120786] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
[    3.164850] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[    3.164859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.164860] [drm] Driver supports precise vblank timestamp query.
[    3.164904] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.177693] [drm] Wrong MCH_SSKPD value: 0x16040307
[    3.177696] [drm] This can cause pipe underruns and display issues.
[    3.177697] [drm] Please upgrade your BIOS to fix this.
[    3.207189] fbcon: inteldrmfb (fb0) is primary device
[    3.388887] ata5: SATA link down (SStatus 0 SControl 300)
[    3.396909] Console: switching to colour frame buffer device 160x64
[    3.399402] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.399403] i915 0000:00:02.0: registered panic notifier
[    3.399417] i915: No ACPI video bus found
[    3.399444] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.881011] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.892921] ata6.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[    3.892925] ata6.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.904178] ata6.00: configured for UDMA/133
[    3.904369] scsi 5:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.22 PQ: 0 ANSI: 5
[    3.904467] sd 5:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.904469] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    3.904531] sd 5:0:0:0: [sdb] Write Protect is off
[    3.904533] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.904551] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.905825]  sdb: sdb1 sdb2 sdb3
[    3.906131] sd 5:0:0:0: [sdb] Attached SCSI disk
[    4.058153] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    4.141231] random: init urandom read with 68 bits of entropy available
[    5.061488] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    6.020688] random: nonblocking pool is initialized
[    6.106944] Adding 4102140k swap on /dev/sdb3.  Priority:-1 extents:1 across:4102140k SSFS
[    6.117111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.149578] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    6.187221] systemd-udevd[345]: starting version 204
[    6.266156] lp: driver loaded but no devices found
[    6.274582] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
[    6.287207] ppdev: user-space parallel port driver
[    6.331069] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    6.331174] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    6.340459] type=1400 audit(1421077973.625:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=431 comm="apparmor_parser"
[    6.340466] type=1400 audit(1421077973.625:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=431 comm="apparmor_parser"
[    6.340469] type=1400 audit(1421077973.625:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser"
[    6.340812] type=1400 audit(1421077973.625:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=431 comm="apparmor_parser"
[    6.340816] type=1400 audit(1421077973.625:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser"
[    6.340993] type=1400 audit(1421077973.625:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser"
[    6.372860] SKU: Nid=0x1d sku_cfg=0x4007f603
[    6.372862] SKU: port_connectivity=0x1
[    6.372863] SKU: enable_pcbeep=0x0
[    6.372864] SKU: check_sum=0x00000007
[    6.372865] SKU: customization=0x000000f6
[    6.372866] SKU: external_amp=0x0
[    6.372866] SKU: platform_type=0x0
[    6.372867] SKU: swap=0x1
[    6.372868] SKU: override=0x1
[    6.373268] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    6.373269]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.373270]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.373270]    mono: mono_out=0x0
[    6.373271]    dig-out=0x11/0x0
[    6.373272]    inputs:
[    6.373273]      Front Mic=0x19
[    6.373274]      Rear Mic=0x18
[    6.373275]      Line=0x1a
[    6.373276] realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
[    6.373277] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0887
[    6.376984] Linux video capture interface: v2.00
[    6.385439] uvcvideo: Found UVC 1.00 device Hercules Dualpix Exchange (06f8:3005)
[    6.394385] input: Hercules Dualpix Exchange as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[    6.394623] usbcore: registered new interface driver uvcvideo
[    6.394625] USB Video Class driver (1.1.1)
[    6.407209] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    6.407437] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    6.408538] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    6.408638] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    6.408713] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.408750] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.409578] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.409866] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.410024] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.426443] 3:3:1: cannot get freq at ep 0x84
[    6.440274] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[    6.440277] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1<6>[    6.440687] usbcore: registered new interface driver snd-usb-audio
[    6.459426] kvm: disabled by bios
[    6.554321] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   12.553427] init: failsafe main process (654) killed by TERM signal
[   12.600193] init: samba-ad-dc main process (671) terminated with status 1
[   12.633341] Bluetooth: Core ver 2.17
[   12.633353] NET: Registered protocol family 31
[   12.633354] Bluetooth: HCI device and connection manager initialized
[   12.633361] Bluetooth: HCI socket layer initialized
[   12.633362] Bluetooth: L2CAP socket layer initialized
[   12.633365] Bluetooth: SCO socket layer initialized
[   12.651701] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.651704] Bluetooth: BNEP filters: protocol multicast
[   12.651712] Bluetooth: BNEP socket layer initialized
[   12.675965] Bluetooth: RFCOMM TTY layer initialized
[   12.675975] Bluetooth: RFCOMM socket layer initialized
[   12.675979] Bluetooth: RFCOMM ver 1.11
[   12.694193] type=1400 audit(1421077979.977:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=798 comm="apparmor_parser"
[   12.694199] type=1400 audit(1421077979.977:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=798 comm="apparmor_parser"
[   12.694542] type=1400 audit(1421077979.977:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=798 comm="apparmor_parser"
[   12.760075] init: cups main process (799) killed by HUP signal
[   12.760084] init: cups main process ended, respawning
[   12.786268] r8169 0000:03:00.0 eth0: link down
[   12.786354] r8169 0000:03:00.0 eth0: link down
[   12.786604] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.786808] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.792367] type=1400 audit(1421077980.077:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=853 comm="apparmor_parser"
[   12.792374] type=1400 audit(1421077980.077:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser"
[   12.792377] type=1400 audit(1421077980.077:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser"
[   12.792720] type=1400 audit(1421077980.077:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser"
[   12.792723] type=1400 audit(1421077980.077:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser"
[   12.792900] type=1400 audit(1421077980.077:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser"
[   12.795586] type=1400 audit(1421077980.081:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=852 comm="apparmor_parser"
[   13.003576] kvm: disabled by bios
[   13.371920] init: plymouth-upstart-bridge main process ended, respawning
[   13.379269] init: plymouth-upstart-bridge main process ended, respawning
[   13.811619] 3:3:1: cannot get freq at ep 0x84
[   13.833618] 3:3:1: cannot get freq at ep 0x84
[   13.868751] 3:3:1: cannot get freq at ep 0x84
[   13.890882] 3:3:1: cannot get freq at ep 0x84
[   15.058409] r8169 0000:03:00.0 eth0: link up
[   15.058416] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   42.749927] audit_printk_skb: 132 callbacks suppressed
[   42.749930] type=1400 audit(1421078010.033:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1761 comm="apparmor_parser"
[   42.749936] type=1400 audit(1421078010.033:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1761 comm="apparmor_parser"
[   42.750282] type=1400 audit(1421078010.033:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1761 comm="apparmor_parser"
[   80.779384] 3:3:1: cannot get freq at ep 0x84
[   80.801444] 3:3:1: cannot get freq at ep 0x84
[   80.879658] 3:3:1: cannot get freq at ep 0x84
[   80.901789] 3:3:1: cannot get freq at ep 0x84
[   87.377155] usb 2-1.1: new full-speed USB device number 4 using ehci-pci
[   87.472155] usb 2-1.1: New USB device found, idVendor=0483, idProduct=5740
[   87.472160] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   87.472163] usb 2-1.1: Product: STM32 Virtual COM Port  
[   87.472166] usb 2-1.1: Manufacturer: STMicroelectronics
[   87.472168] usb 2-1.1: SerialNumber: 125E32643431
[   87.481937] cdc_acm 2-1.1:1.0: This device cannot do calls on its own. It is not a modem.
[   87.481964] cdc_acm 2-1.1:1.0: ttyACM0: USB ACM device
[   87.482955] usbcore: registered new interface driver cdc_acm
[   87.482958] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[  953.706045] usb 2-1.1: USB disconnect, device number 4
[  986.197017] systemd-hostnamed[3226]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 7461.023220] systemd-hostnamed[3728]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 7785.759397] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[ 7785.854616] usb 2-1.3: New USB device found, idVendor=0483, idProduct=5740
[ 7785.854621] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7785.854624] usb 2-1.3: Product: STM32 Virtual COM Port  
[ 7785.854627] usb 2-1.3: Manufacturer: STMicroelectronics
[ 7785.854629] usb 2-1.3: SerialNumber: 125E32643431
[ 7785.855041] cdc_acm 2-1.3:1.0: This device cannot do calls on its own. It is not a modem.
[ 7785.855061] cdc_acm 2-1.3:1.0: ttyACM0: USB ACM device

gl38

Re : Dongle GPS USB : GT-730FL-S non détecté.

Et que donne la commande lsusb avec la clé branchée ?
Cordialement,
Guy

Dernière modification par gl38 (Le 13/01/2015, à 09:36)

sfouludo

Re : Dongle GPS USB : GT-730FL-S non détecté.

Et que donne la commande lsusb avec la clé branchée ?

Sur Ubuntu rien.

Pour info:
Sur Windows il n'y a aucune réaction au branchement de la clé. Par contre sur Windows avec le programme fourni, il est possible de consulter les données enregistré sur la clé.

Merci pour votre aide je continue mes recherches.

gl38

Re : Dongle GPS USB : GT-730FL-S non détecté.

Que lsusb ne donne rien est étonnant : dmesg dit qu'il y a quelque chose qui a pour identité :

idVendor=0483, idProduct=5740

et ces numéros sont ceux d'une montre GPS vendue chez decathlon, me semble-t-il et je vois au moins 3 autres dispositifs usb.
Cordialement,
Guy

sfouludo

Re : Dongle GPS USB : GT-730FL-S non détecté.

Bizarre, j utilise plusieurs programme comme ( GPSPrune, Foxtrotgps, viking... ) mais aucun n'arrive a détecter automatiquement une source usb. D'autre par, si la clé est vraiment reconnu, je suis incapable de donner un chemin accès au logiciel pour qui récupère les fichier GPX stocké dedans.

gl38

Re : Dongle GPS USB : GT-730FL-S non détecté.

As-tu essayé avec gpsman ou gpsbabel ?
Ces 2 programmes voient en principe les gps connectés sur un port série, ce qui, me semble-t-il, est le cas de cette clé, le driver servant à simuler un port série sur le port usb.
Cordialement,
Guy

Pympc

Re : Dongle GPS USB : GT-730FL-S non détecté.

As-tu essayé avec xgps.

Pour ma part je possède un GPS USB (Sur Amaz... USB GPS Récepteur 65 Canaux SkyTraQ Venus & Chipset USB GPS Receiver) et xgps le reconnaît parfaitement, ainsi que viking et navit.

As tu suivis les indications données sur la partie GPS de la documentation Ubuntu ?.

sfouludo

Re : Dongle GPS USB : GT-730FL-S non détecté.

Bonjour, Pympc et merci a toi aussi pour ton aide.

Les logiciels que j'ai essayé sont : xgps, gpsman, gpsbabel, GPSPrune, Foxtrotgps, viking... Bref je dois mal mi prendre. SVP que dois-je faire une foi la clé connecté ?

Ps : si la clé est vraiment reconnu, je suis incapable de donner un chemin accès au logiciel pour qui récupère les fichier GPX stocké dedans.

Merci.

gl38

Re : Dongle GPS USB : GT-730FL-S non détecté.

Il me semble que /dev/ttyACM0 pointe sur ta clé.
Cordialement,
Guy

sfouludo

Re : Dongle GPS USB : GT-730FL-S non détecté.

Bon ben voila je pense avoir fait le tour de tout vos conseils.
Je suis sur que je dois mal mi prendre mais bon !  Merci pour votre aide.
Je termine mes essais sur viking. Je teste toute sorte de possibilité on c'est jamais.

Bonne fin de journée les Ubunteros

jano_

Re : Dongle GPS USB : GT-730FL-S non détecté.

Salut, j'espère que tu ne l'a pas jeté j'ai la même ici, et ça marche bien (version avec puce sirf4) .
Je reconnais que ce n'est pas du plug and play et que ça demande un peu de recherche en anglais pour y arriver.
d'abord ce n'est pas une clé reconnu directement en usb comme une clé usb traditionnelle, mais une interface série usb pour dialoguer avec la clé.
tu peux utiliser skytraq-datalogger pour la configurer (choisir temps, distance et vitesse de déclenchement)

le déchargement / effacement des traces se fait en ligne de commande avec gpsbabel et le module "skytraq" en input, par exemple:

gpsbabel -i skytraq -f /dev/ttyACM0 -x simplify,error=0.003k -o gpx -F gps/vol145.gpx

(le "-x simplify,error=0.003k" sert juste à enlever les points qui gardent la trace dans moins de 3 mètres d'erreur, pour avoir une trace moins chargée, mais c'est facultatif)

pour effacer ce qui est sur la clé:

gpsbabel -i skytraq,erase,no-output -f /dev/ttyACM0

note que cette clè est aussi reconnue en tant que gps externe par gpsd, sous reserve de ne pas lui faire changer de vitesse de transmission (elle se bloque alors et il faut attendre le vidage batterie pour qu'elle reparte) d'où l'option "-b" avec gpsd (dans mon cas, peut être que les versions à base de puce venus marchent correctement pour ça)

gpsd -Nb /dev/ttyACM0

tu peux alors l'utiliser avec navit, dans josm avec le plugin livegps etc...

ah oui j'oubliais, il faut qu'elle soit allumé et pas utilisée par gpsd pour pouvoir la décharger avec gpsbabel.

Dernière modification par jano_ (Le 05/04/2015, à 07:08)