Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 04/05/2015, à 19:00

alucard21

[RESOLU ] problèmes montage et accés disque dur externe

Bonjour,

Après avoir fait une mise a jour, mon pc ne fonctionnait plus, donc je décide de changer le dd interne pour mettre l'ancien dans un boitier, mais pour l'instant impossible de monter mon ancien dd, il me marque comme message "Impossible de monter Volume de 317 GB - An operation is already pending".

Quand je laisse le disque dur externe un moment le temps que la lumière s'arrete de clignoter, j'ai comme message :
Error mounting /dev/sdb1 at /media/alucard21/45859584-7ea4-44d5-a2f4-e4db2567f2ff: Command-line `mount -t "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/sdb1" "/media/alucard21/45859584-7ea4-44d5-a2f4-e4db2567f2ff"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

Quelqu'un peut m'aidez a régler ce problème.

Merci

Dernière modification par alucard21 (Le 06/05/2015, à 00:12)

Hors ligne

#2 Le 04/05/2015, à 19:58

toutafai

Re : [RESOLU ] problèmes montage et accés disque dur externe

Bonsoir,

Un P.... de grand classique : Il y a une erreur dans le système de fichier de ton disque dur externe, il faut la corriger.

Direction "la mine d'or quand on sait pas" ;-)

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#3 Le 04/05/2015, à 20:18

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

ok merci mais j'ai rien compris, tu peux m'aidez s'il te plait

Hors ligne

#4 Le 04/05/2015, à 21:23

toutafai

Re : [RESOLU ] problèmes montage et accés disque dur externe

no problemo, mais aide moi à t'aider :  c'est quoi que tu comprends pas ?

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#5 Le 04/05/2015, à 23:36

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

en gros un peu tout, le truc c'est que je voudrais savoir si mes donnés sont toujours sur le dd et si oui que je puisse les copiers sur mon nouveau pc et après je formate l'ancien

Hors ligne

#6 Le 04/05/2015, à 23:46

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

alors j'ai installé gparted, il voit mon dd et il as comme extension dev/sdb1, en faisant un clic droit sur la partition qui m'interesse j'ai comme choix :

supprimer
redimensionner/déplacer
copier
formater en :
gérer les drapeaux
vérifier
étiquette
nouvelle UUID
information

je peux faire quoi ?

Dernière modification par alucard21 (Le 04/05/2015, à 23:49)

Hors ligne

#7 Le 05/05/2015, à 00:30

toutafai

Re : [RESOLU ] problèmes montage et accés disque dur externe

???

Heu, mais pourquoi Gparted ?
Tu peux m'expliquer ou es-ce que tu  vois qu'il faut passer par gparted dans la doc que j'ai indiqué ???????
( en plus avec gparted, c'est vite fait de faire une méga boulette genre "shooter les partitions" roll)

Tombé dans l'informatique étant petit, j'en ai fait mon métier. Utilisateur d'Ubuntu depuis novembre 2006, actuellement sous 20.04 x64 (Que d'évolution
depuis Dapper Drake ! Ça rajeunit pas ^^^).

Hors ligne

#8 Le 05/05/2015, à 00:33

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

parce que je voulais voir si mes partition étaient toujours là, mais j'ai rien fait, du coup je fais quoi alors (a part ne pas utiliser gparted)

Hors ligne

#9 Le 05/05/2015, à 08:25

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

salut on voulant monter par ligne de commande, j'ai eu comme message d'erreur :
mount : mauvais type de système de fichiers, option erronée, superbloc erroné
        sur /dev/sdb1, page de code ou programme auxiliaire manquant, ou autre erreur
       Dans quelques cas certaines informations sont utiles dans le journal
        système — essayez « dmesg | tail » ou quelque chose du genre

Hors ligne

#10 Le 05/05/2015, à 08:51

malbo

Re : [RESOLU ] problèmes montage et accés disque dur externe

Pourrais-tu démarrer sur une session live de Ubuntu 14.04 et faire un Boot-Info (le disque dur externe étant connecté bien entendu) ? Tu posteras l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#11 Le 05/05/2015, à 09:02

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

ok et je fais comment, je tape  Boot-Info sur le terminal ?

rectif : j'ai rien dit je suis allez sur la page et je fais la clé boot, je fais la manip et je te tiens au courant

Dernière modification par alucard21 (Le 05/05/2015, à 09:20)

Hors ligne

#12 Le 05/05/2015, à 12:25

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

voila le resultat de la recherche du logiciel .

http://paste.ubuntu.com/10989206/

Hors ligne

#13 Le 05/05/2015, à 13:12

malbo

Re : [RESOLU ] problèmes montage et accés disque dur externe

Ton Boot-Info est là : 

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub.
 => No known boot loader is installed in the MBR of /dev/sdb.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 17.1 Rebecca 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: /dev/sdb1 already mounted or /mnt/BootInfo/sdb1 busy

sdb2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT16
    Boot sector info:  According to the info in the boot sector, sdb2 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb2 starts at sector 20644. According to the info in 
                       the boot sector, sdb2 has 0 sectors.
    Mounting failed:   mount: /dev/sdb1 already mounted or /mnt/BootInfo/sdb1 busy
mount: /dev/sdb2 already mounted or /mnt/BootInfo/sdb2 busy

sdc1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /dev/sdb1 already mounted or /mnt/BootInfo/sdb1 busy
mount: /dev/sdb2 already mounted or /mnt/BootInfo/sdb2 busy
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so


sdc2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdc5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   971,010,047   971,008,000  83 Linux
/dev/sda2         971,012,094   976,771,071     5,758,978   5 Extended
/dev/sda5         971,012,096   976,771,071     5,758,976  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 4026 MB, 4026531840 bytes
255 heads, 63 sectors/track, 489 cylinders, total 7864320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *              0     2,039,807     2,039,808   0 Empty
/dev/sdb2              20,644        25,315         4,672  ef EFI (FAT-12/16/32)

/dev/sdb1 overlaps with /dev/sdb2

GUID Partition Table detected, but does not seem to be used.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdb1               0     2,039,751     2,039,752 Data partition (Windows/Linux)
/dev/sdb2          20,644        25,315         4,672 Data partition (Windows/Linux)

Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *          2,048   619,378,687   619,376,640  83 Linux
/dev/sdc2         619,380,734   625,141,759     5,761,026   5 Extended
/dev/sdc5         619,380,736   625,141,759     5,761,024  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        e23f67b8-60f2-40bd-af10-d0455a600134   ext4       
/dev/sda5        59d14b16-4841-4473-aa57-171435f98cd7   swap       
/dev/sdb1                                               iso9660    Ubuntu 14.04.2 LTS amd64
/dev/sdb2        3006-9304                              vfat       
/dev/sdc1        45859584-7ea4-44d5-a2f4-e4db2567f2ff   ext4       
/dev/sdc5        eb27a08b-4174-409d-8b5a-9105d8682291   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May  5 09:53 ata-HL-DT-STDVDRAM_GT31N_KY9A7FM1844 -> ../../sr0
lrwxrwxrwx 1 root root  9 May  5 09:58 ata-ST500LM012_HN-M500MBB_S2ZYJ9BG101383 -> ../../sda
lrwxrwxrwx 1 root root 10 May  5 09:53 ata-ST500LM012_HN-M500MBB_S2ZYJ9BG101383-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  5 09:53 ata-ST500LM012_HN-M500MBB_S2ZYJ9BG101383-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  5 09:53 ata-ST500LM012_HN-M500MBB_S2ZYJ9BG101383-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 May  5 09:58 ata-WDC_WD3200BPVT-22ZEST0_WD-WXC1A70X0255 -> ../../sdc
lrwxrwxrwx 1 root root 10 May  5 09:53 usb-ASMT_2115_00000000000000000000-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 May  5 09:53 usb-ASMT_2115_00000000000000000000-0:0-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 May  5 09:53 usb-ASMT_2115_00000000000000000000-0:0-part5 -> ../../sdc5
lrwxrwxrwx 1 root root  9 May  5 09:58 usb-JetFlash_Transcend_4GB_9DKMPEN6-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May  5 09:53 usb-JetFlash_Transcend_4GB_9DKMPEN6-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May  5 09:53 usb-JetFlash_Transcend_4GB_9DKMPEN6-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 May  5 09:58 wwn-0x50004cf20ef7ab08 -> ../../sda
lrwxrwxrwx 1 root root 10 May  5 09:53 wwn-0x50004cf20ef7ab08-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  5 09:53 wwn-0x50004cf20ef7ab08-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  5 09:53 wwn-0x50004cf20ef7ab08-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 May  5 09:58 wwn-0x50014ee2af822086 -> ../../sdc

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb         /cdrom                   iso9660    (ro,noatime)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e23f67b8-60f2-40bd-af10-d0455a600134
else
  search --no-floppy --fs-uuid --set=root e23f67b8-60f2-40bd-af10-d0455a600134
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e23f67b8-60f2-40bd-af10-d0455a600134
	else
	  search --no-floppy --fs-uuid --set=root e23f67b8-60f2-40bd-af10-d0455a600134
	fi
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=e23f67b8-60f2-40bd-af10-d0455a600134 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-37-generic
}
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e23f67b8-60f2-40bd-af10-d0455a600134
	else
	  search --no-floppy --fs-uuid --set=root e23f67b8-60f2-40bd-af10-d0455a600134
	fi
	echo	'Chargement de Linux 3.13.0-37-generic…'
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=e23f67b8-60f2-40bd-af10-d0455a600134 ro recovery nomodeset 
	echo	'Chargement du disque mémoire initial…'
	initrd	/boot/initrd.img-3.13.0-37-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e23f67b8-60f2-40bd-af10-d0455a600134
	else
	  search --no-floppy --fs-uuid --set=root e23f67b8-60f2-40bd-af10-d0455a600134
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  e23f67b8-60f2-40bd-af10-d0455a600134
	else
	  search --no-floppy --fs-uuid --set=root e23f67b8-60f2-40bd-af10-d0455a600134
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=e23f67b8-60f2-40bd-af10-d0455a600134 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=59d14b16-4841-4473-aa57-171435f98cd7 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown MBR on /dev/sdb

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f1 06 b4 42 eb 15 eb 00  |...t.f.....B....|
00000070  5a 51 b4 08 cd 13 83 e1  3f 5b 51 0f b6 c6 40 50  |ZQ......?[Q...@P|
00000080  f7 e1 53 52 50 bb 00 7c  b9 04 00 66 a1 b0 07 e8  |..SRP..|...f....|
00000090  44 00 0f 82 80 00 66 40  80 c7 02 e2 f2 66 81 3e  |D.....f@.....f.>|
000000a0  40 7c fb c0 78 70 75 09  fa bc ec 7b ea 44 7c 00  |@|..xpu....{.D|.|
000000b0  00 e8 83 00 69 73 6f 6c  69 6e 75 78 2e 62 69 6e  |....isolinux.bin|
000000c0  20 6d 69 73 73 69 6e 67  20 6f 72 20 63 6f 72 72  | missing or corr|
000000d0  75 70 74 2e 0d 0a 66 60  66 31 d2 66 03 06 f8 7b  |upt...f`f1.f...{|
000000e0  66 13 16 fc 7b 66 52 66  50 06 53 6a 01 6a 10 89  |f...{fRfP.Sj.j..|
000000f0  e6 66 f7 36 e8 7b c0 e4  06 88 e1 88 c5 92 f6 36  |.f.6.{.........6|
00000100  ee 7b 88 c6 08 e1 41 b8  01 02 8a 16 f2 7b cd 13  |.{....A......{..|
00000110  8d 64 10 66 61 c3 e8 1e  00 4f 70 65 72 61 74 69  |.d.fa....Operati|
00000120  6e 67 20 73 79 73 74 65  6d 20 6c 6f 61 64 20 65  |ng system load e|
00000130  72 72 6f 72 2e 0d 0a 5e  ac b4 0e 8a 3e 62 04 b3  |rror...^....>b..|
00000140  07 cd 10 3c 0a 75 f1 cd  18 f4 eb fd 00 00 00 00  |...<.u..........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000160  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  b0 35 00 00 00 00 00 00  fd bc 65 75 00 00 80 00  |.5........eu....|
000001c0  01 00 00 3f e0 e3 00 00  00 00 00 20 1f 00 00 fe  |...?....... ....|
000001d0  ff ff ef fe ff ff a4 50  00 00 40 12 00 00 00 00  |.......P..@.....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on sdb1

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f1 06 b4 42 eb 15 eb 00  |...t.f.....B....|
00000070  5a 51 b4 08 cd 13 83 e1  3f 5b 51 0f b6 c6 40 50  |ZQ......?[Q...@P|
00000080  f7 e1 53 52 50 bb 00 7c  b9 04 00 66 a1 b0 07 e8  |..SRP..|...f....|
00000090  44 00 0f 82 80 00 66 40  80 c7 02 e2 f2 66 81 3e  |D.....f@.....f.>|
000000a0  40 7c fb c0 78 70 75 09  fa bc ec 7b ea 44 7c 00  |@|..xpu....{.D|.|
000000b0  00 e8 83 00 69 73 6f 6c  69 6e 75 78 2e 62 69 6e  |....isolinux.bin|
000000c0  20 6d 69 73 73 69 6e 67  20 6f 72 20 63 6f 72 72  | missing or corr|
000000d0  75 70 74 2e 0d 0a 66 60  66 31 d2 66 03 06 f8 7b  |upt...f`f1.f...{|
000000e0  66 13 16 fc 7b 66 52 66  50 06 53 6a 01 6a 10 89  |f...{fRfP.Sj.j..|
000000f0  e6 66 f7 36 e8 7b c0 e4  06 88 e1 88 c5 92 f6 36  |.f.6.{.........6|
00000100  ee 7b 88 c6 08 e1 41 b8  01 02 8a 16 f2 7b cd 13  |.{....A......{..|
00000110  8d 64 10 66 61 c3 e8 1e  00 4f 70 65 72 61 74 69  |.d.fa....Operati|
00000120  6e 67 20 73 79 73 74 65  6d 20 6c 6f 61 64 20 65  |ng system load e|
00000130  72 72 6f 72 2e 0d 0a 5e  ac b4 0e 8a 3e 62 04 b3  |rror...^....>b..|
00000140  07 cd 10 3c 0a 75 f1 cd  18 f4 eb fd 00 00 00 00  |...<.u..........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001b0  b0 35 00 00 00 00 00 00  fd bc 65 75 00 00 80 00  |.5........eu....|
000001c0  01 00 00 3f e0 e3 00 00  00 00 00 20 1f 00 00 fe  |...?....... ....|
000001d0  ff ff ef fe ff ff a4 50  00 00 40 12 00 00 00 00  |.......P..@.....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
cat: write error: Broken pipe
File descriptor 9 (/proc/6236/mounts) leaked on lvs invocation. Parent PID 19628: bash
File descriptor 63 (pipe:[230831]) leaked on lvs invocation. Parent PID 19628: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 2015-05-05__09h58 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdc1 : Error code 32
mount -r /dev/sdc1 /mnt/boot-sav/sdc1
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdc1 : Error code 32

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sdb1'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda1:Linux Mint 17.1 Rebecca (17.1):LinuxMint:linux
/dev/sdc1:Linux Mint 17.1 Rebecca (17.1):LinuxMint1:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="e23f67b8-60f2-40bd-af10-d0455a600134" TYPE="ext4"
/dev/sda5: UUID="59d14b16-4841-4473-aa57-171435f98cd7" TYPE="swap"
/dev/sdb1: LABEL="Ubuntu 14.04.2 LTS amd64" TYPE="iso9660"
/dev/sdb2: SEC_TYPE="msdos" UUID="3006-9304" TYPE="vfat"
/dev/sdc1: UUID="45859584-7ea4-44d5-a2f4-e4db2567f2ff" TYPE="ext4"
/dev/sdc5: UUID="eb27a08b-4174-409d-8b5a-9105d8682291" TYPE="swap"


2 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdc1 : Error code 32
mount -r /dev/sdc1 /mnt/boot-sav/sdc1
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdc1 : Error code 32
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
dd: invalid number ‘0’
Warning: /var/log/boot-sav/log/2015-05-05__09h58boot-info39/sdb/current_mbr.img could not be created. Veuillez indiquer ce message à boot.repair@gmail.com

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 nov.  26 22:46 grub.d
total 88
-rwxr-xr-x 1 root root  9424 mai   15  2014 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root  7500 mai    5 06:09 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1416 mai   15  2014 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai   15  2014 40_custom
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 mai   15  2014 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda1.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb2.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdc1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	no-os,	0 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST500LM012 HN-M5 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
1      1049kB  497GB  497GB   primary   ext4            boot
2      497GB   500GB  2949MB  extended
5      497GB   500GB  2949MB  logical   linux-swap(v1)


Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.  However, it does not have a valid fake msdos partition table, as it should.  Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables.  Or perhaps you deleted the GPT table, and are now using an msdos partition table.  Is this a GPT partition table?
Error: Both the primary and backup GPT tables are corrupt.  Try making a fresh table, and using Parted's rescue feature to recover partitions.

Model: ASMT 2115 (scsi)
Disk /dev/sdc: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
1      1049kB  317GB  317GB   primary   ext4            boot
2      317GB   320GB  2950MB  extended
5      317GB   320GB  2950MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA ST500LM012 HN-M5;
1:1049kB:497GB:497GB:ext4::boot;
2:497GB:500GB:2949MB:::;
5:497GB:500GB:2949MB:linux-swap(v1)::;

Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.  However, it does not have a valid fake msdos partition table, as it should.  Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables.  Or perhaps you deleted the GPT table, and are now using an msdos partition table.  Is this a GPT partition table?
Error: Both the primary and backup GPT tables are corrupt.  Try making a fresh table, and using Parted's rescue feature to recover partitions.

BYT;
/dev/sdc:320GB:scsi:512:512:msdos:ASMT 2115;
1:1049kB:317GB:317GB:ext4::boot;
2:317GB:320GB:2950MB:::;
5:317GB:320GB:2950MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL    MODEL    UUID
sda   disk          465,8G          ST500LM0
sda1  part ext4       463G                   e23f67b8-60f2-40bd-af10-d0455a600134
sda2  part              1K
sda5  part swap       2,8G                   59d14b16-4841-4473-aa57-171435f98cd7
sdb   disk iso9660    3,8G Ubuntu 14.04.2 LTS amd64
Transcen
sdb1  part iso9660    996M Ubuntu 14.04.2 LTS amd64

sdb2  part vfat       2,3M                   3006-9304
sdc   disk          298,1G          2115
sdc1  part ext4     295,4G                   45859584-7ea4-44d5-a2f4-e4db2567f2ff
sdc2  part              1K
sdc5  part swap       2,8G                   eb27a08b-4174-409d-8b5a-9105d8682291
sr0   rom            1024M          DVDRAM G
loop0 loop squashfs   953M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0
sda5     1  0  0         [SWAP]
sdb      1  0  1 running
sdb1     1  0  1
sdb2     1  0  1
sdc      1  0  0 running
sdc1     1  0  0
sdc2     1  0  0
sdc5     1  0  0
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 sdc2 sdc5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog media0 mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdb2 sdc sdc1 sdc2 sdc5 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 watchdog zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdb2
00000000  eb 3c 90 6d 6b 66 73 2e  66 61 74 00 02 04 01 00  |.<.mkfs.fat.....|
00000010  02 00 02 40 12 f8 04 00  20 00 40 00 00 00 00 00  |...@.... .@.....|
00000020  00 00 00 00 80 00 29 04  93 06 30 4e 4f 20 4e 41  |......)...0NO NA|
00000030  4d 45 20 20 20 20 46 41  54 31 32 20 20 20 0e 1f  |ME    FAT12   ..|
00000040  be 5b 7c ac 22 c0 74 0b  56 b4 0e bb 07 00 cd 10  |.[|.".t.V.......|
00000050  5e eb f0 32 e4 cd 16 cd  19 eb fe 54 68 69 73 20  |^..2.......This |
00000060  69 73 20 6e 6f 74 20 61  20 62 6f 6f 74 61 62 6c  |is not a bootabl|
00000070  65 20 64 69 73 6b 2e 20  20 50 6c 65 61 73 65 20  |e disk.  Please |
00000080  69 6e 73 65 72 74 20 61  20 62 6f 6f 74 61 62 6c  |insert a bootabl|
00000090  65 20 66 6c 6f 70 70 79  20 61 6e 64 0d 0a 70 72  |e floppy and..pr|
000000a0  65 73 73 20 61 6e 79 20  6b 65 79 20 74 6f 20 74  |ess any key to t|
000000b0  72 79 20 61 67 61 69 6e  20 2e 2e 2e 20 0d 0a 00  |ry again ... ...|
000000c0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sdb1'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.4G  129M  1.3G  10% /
udev           devtmpfs   1.4G   12K  1.4G   1% /dev
tmpfs          tmpfs      276M  1.3M  275M   1% /run
/dev/sdb       iso9660    996M  996M     0 100% /cdrom
/dev/loop0     squashfs   953M  953M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.4G   68K  1.4G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.4G   80K  1.4G   1% /run/shm
none           tmpfs      100M   76K  100M   1% /run/user
/dev/sda1      ext4       456G   14G  420G   4% /mnt/boot-sav/sda1

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0000e6d6

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   971010047   485504000   83  Linux
/dev/sda2       971012094   976771071     2879489    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5       971012096   976771071     2879488   82  Linux swap / Solaris

Disk /dev/sdb: 4026 MB, 4026531840 bytes
255 heads, 63 sectors/track, 489 cylinders, total 7864320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7565bcfd

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           0     2039807     1019904    0  Empty
/dev/sdb2           20644       25315        2336   ef  EFI (FAT-12/16/32)

Disk /dev/sdb1: 1044 MB, 1044381696 bytes
255 heads, 63 sectors/track, 126 cylinders, total 2039808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7565bcfd

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1p1   *           0     2039807     1019904    0  Empty
/dev/sdb1p2           20644       25315        2336   ef  EFI (FAT-12/16/32)

Disk /dev/sdc: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00036b98

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *        2048   619378687   309688320   83  Linux
/dev/sdc2       619380734   625141759     2880513    5  Extended
/dev/sdc5       619380736   625141759     2880512   82  Linux swap / Solaris


User choice: Est-ce que sda (500GB) est un disque amovible ? no


gui-tab-other.sh: line 94: _checkbutton_repairfilesystems: command not found


=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdc1.
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (500GB) !


=================== User settings
The settings chosen by the user will not act on the boot.

Il apparaît bien que la partition sdc1 (UUID=45859584-7ea4-44d5-a2f4-e4db2567f2ff) de ton disque dur externe n'est pas montable : 

mount /dev/sdc1 : Error code 32
mount -r /dev/sdc1 /mnt/boot-sav/sdc1
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

Si on essaie de réparer le système de fichiers d'une partition, il y a un risque de perdre tout ce qui se trouve sur cette partition. Si tu as des données précieuses dans ce disque dur externe, je te conseille de t'adresser à un professionnel de la récupération de données (j'en connais un bon  : c'est Rémy Sabatier)

Dernière modification par malbo (Le 05/05/2015, à 13:14)

Hors ligne

#14 Le 05/05/2015, à 13:21

alucard21

Re : [RESOLU ] problèmes montage et accés disque dur externe

ok merci de l info, je vais allez voir un informaticien

Hors ligne

Pages : 1