Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites". Attention, le forum rencontre actuellement quelques difficultés. En cas d'erreur 502, il ne faut pas re-valider l'envoi d'un message ou l'ouverture d'une discussion, au risque de créer un doublon.

La section divers se réorganise ! De nouvelles sous-sections à venir. (plus d'infos + donner son avis)

#1 Le 02/08/2008, à 23:39

Raphi58

[Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Bonjour,
Je travaille actuellement sur Ubuntu 8.04.
J’ai un disque dur externe (Seagate External Drive USB Device (298.09 Go, soit 320 Gb)).
Il était reconnu sous Ubuntu 6.06, mais il n’est pas reconnu sous Ubuntu 8.04
Qu’avez-vous comme solutions à me proposer pour qu’il soit reconnu ?
J’attends vos réponses avec impatience et vous en remercie par avance.

@+ Bonne soirée

Dernière modification par slasher-fun (Le 12/08/2008, à 12:59)

#2 Le 02/08/2008, à 23:49

wouldsmina

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

bonsoir,
que donne la commande lsusb et dmesg après le branchement du disque?

Hors ligne

#3 Le 03/08/2008, à 21:15

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Bonsoir,

Alors pour la première commande il me met :

Bus 005 Device 005: ID 0bc2:0503 Seagate RSS LLC
Bus 005 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 

Et pour la deuxième commande il m’affiche :

[   21.515352] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 00000000
[   21.515360] monitor/mwait feature present.
[   21.515367] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   21.515370] CPU: L2 cache: 1024K
[   21.515373] CPU: Physical Processor ID: 0
[   21.515375] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000641d 00000000 00000001 00000000
[   21.515757] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[   21.515802] Total of 2 processors activated (11975.52 BogoMIPS).
[   21.515932] ENABLING IO-APIC IRQs
[   21.516111] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.663431] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   21.683438] Brought up 2 CPUs
[   21.683468] CPU0 attaching sched-domain:
[   21.683472]  domain 0: span 03
[   21.683474]   groups: 01 02
[   21.683478]   domain 1: span 03
[   21.683480]    groups: 03
[   21.683482] CPU1 attaching sched-domain:
[   21.683484]  domain 0: span 03
[   21.683486]   groups: 02 01
[   21.683489]   domain 1: span 03
[   21.683491]    groups: 03
[   21.683783] net_namespace: 64 bytes
[   21.683795] Booting paravirtualized kernel on bare hardware
[   21.684411] Time: 21:23:58  Date: 08/03/08
[   21.684442] NET: Registered protocol family 16
[   21.684721] EISA bus registered
[   21.684728] ACPI: bus type pci registered
[   21.685125] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[   21.685127] PCI: Using configuration type 1
[   21.685145] Setting up standard PCI resources
[   21.697114] ACPI: EC: Look up EC in DSDT
[   21.700353] ACPI: Interpreter enabled
[   21.700357] ACPI: (supports S0 S1 S3 S4 S5)
[   21.700377] ACPI: Using IOAPIC for interrupt routing
[   21.707479] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.707986] Force enabled HPET at base address 0xfed00000
[   21.707994] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[   21.707997] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[   21.708375] PCI: Transparent bridge - 0000:00:1e.0
[   21.708401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.708504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   21.713996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   21.714102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   21.714204] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   21.714306] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   21.714409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   21.714514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   21.714618] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   21.714722] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   21.714867] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  2B, should be 1E [20070126]
[   21.714874] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.714918] pnp: PnP ACPI init
[   21.714926] ACPI: bus type pnp registered
[   21.718472] pnp: PnP ACPI: found 14 devices
[   21.718475] ACPI: ACPI bus type pnp unregistered
[   21.718479] PnPBIOS: Disabled by ACPI PNP
[   21.718800] PCI: Using ACPI for IRQ routing
[   21.718804] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.743311] NET: Registered protocol family 8
[   21.743313] NET: Registered protocol family 20
[   21.743433] hpet clockevent registered
[   21.743439] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   21.743444] hpet0: 3 64-bit timers, 14318180 Hz
[   21.744497] AppArmor: AppArmor Filesystem Enabled
[   21.747305] Time: tsc clocksource has been installed.
[   21.759403] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   21.759406] system 00:07: ioport range 0x800-0x87f has been reserved
[   21.759408] system 00:07: ioport range 0x400-0x41f has been reserved
[   21.759411] system 00:07: ioport range 0x480-0x4bf has been reserved
[   21.759415] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[   21.759418] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[   21.759424] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[   21.759427] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[   21.759436] system 00:0c: ioport range 0x290-0x297 has been reserved
[   21.759443] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   21.759446] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[   21.759448] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   21.759451] system 00:0d: iomem range 0x100000-0x1ffeffff could not be reserved
[   21.759454] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[   21.789998] PCI: Bridge: 0000:00:01.0
[   21.790002]   IO window: d000-dfff
[   21.790007]   MEM window: fa000000-fbefffff
[   21.790011]   PREFETCH window: f0000000-f8ffffff
[   21.790017] PCI: Bridge: 0000:00:1e.0
[   21.790020]   IO window: e000-efff
[   21.790026]   MEM window: fbf00000-fbffffff
[   21.790030]   PREFETCH window: disabled.
[   21.790048] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   21.790060] NET: Registered protocol family 2
[   21.827565] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   21.827832] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   21.827923] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   21.828014] TCP: Hash tables configured (established 16384 bind 16384)
[   21.828017] TCP reno registered
[   21.839650] checking if image is initramfs... it is
[   22.243462] Switched to high resolution mode on CPU 1
[   22.247294] Switched to high resolution mode on CPU 0
[   22.425103] Freeing initrd memory: 7304k freed
[   22.426206] audit: initializing netlink socket (disabled)
[   22.426233] audit(1217798638.272:1): initialized
[   22.428973] VFS: Disk quotas dquot_6.5.1
[   22.429077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.429250] io scheduler noop registered
[   22.429253] io scheduler anticipatory registered
[   22.429255] io scheduler deadline registered
[   22.429266] io scheduler cfq registered (default)
[   22.429369] Boot video device is 0000:01:00.0
[   22.429748] isapnp: Scanning for PnP cards...
[   22.781250] isapnp: No Plug & Play device found
[   22.819206] Real Time Clock Driver v1.12ac
[   22.819394] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.819549] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.820552] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.821554] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.821639] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   22.821776] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   22.824625] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.824633] serio: i8042 AUX port at 0x60,0x64 irq 12
[   22.842893] mice: PS/2 mouse device common for all mice
[   22.843057] EISA: Probing bus 0 at eisa.0
[   22.843095] EISA: Detected 0 cards.
[   22.843099] cpuidle: using governor ladder
[   22.843101] cpuidle: using governor menu
[   22.843203] NET: Registered protocol family 1
[   22.843237] Using IPI No-Shortcut mode
[   22.843276] registered taskstats version 1
[   22.843366]   Magic number: 4:288:398
[   22.843524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   22.843526] EDD information not available.
[   22.843947] Freeing unused kernel memory: 368k freed
[   22.868079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   24.063489] fuse init (API version 7.9)
[   24.137610] ACPI Error (tbinstal-0134): Table has invalid signature [  ��], must be SSDT, PSDT or OEMx [20070126]
[   24.137623] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ddcc4180), AE_BAD_SIGNATURE
[   24.137703] ACPI: Processor [CPU1] (supports 8 throttling states)
[   24.188310] ACPI Error (tbinstal-0134): Table has invalid signature [  ��], must be SSDT, PSDT or OEMx [20070126]
[   24.188320] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ddcc4240), AE_BAD_SIGNATURE
[   24.188367] ACPI: Processor [CPU2] (supports 8 throttling states)
[   24.188386] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   24.188400] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   24.374258] usbcore: registered new interface driver usbfs
[   24.374299] usbcore: registered new interface driver hub
[   24.381936] usbcore: registered new device driver usb
[   24.389983] USB Universal Host Controller Interface driver v3.0
[   24.390069] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   24.390085] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   24.390090] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   24.390461] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   24.390496] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[   24.390704] usb usb1: configuration #1 chosen from 1 choice
[   24.390743] hub 1-0:1.0: USB hub found
[   24.390753] hub 1-0:1.0: 2 ports detected
[   24.494009] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
[   24.494037] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   24.494045] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   24.494102] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   24.494149] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c000
[   24.494366] usb usb2: configuration #1 chosen from 1 choice
[   24.494412] hub 2-0:1.0: USB hub found
[   24.494423] hub 2-0:1.0: 2 ports detected
[   24.597935] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   24.597954] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   24.597960] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   24.597999] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   24.598033] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[   24.598217] usb usb3: configuration #1 chosen from 1 choice
[   24.598256] hub 3-0:1.0: USB hub found
[   24.598266] hub 3-0:1.0: 2 ports detected
[   24.701873] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[   24.701892] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   24.701898] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   24.701942] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   24.701971] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
[   24.702153] usb usb4: configuration #1 chosen from 1 choice
[   24.702196] hub 4-0:1.0: USB hub found
[   24.702207] hub 4-0:1.0: 2 ports detected
[   24.769384] SCSI subsystem initialized
[   24.805927] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   24.805954] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   24.805959] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   24.806006] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   24.809917] ehci_hcd 0000:00:1d.7: debug port 1
[   24.809927] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   24.809945] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9fffc00
[   24.826695] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   24.826901] usb usb5: configuration #1 chosen from 1 choice
[   24.826949] hub 5-0:1.0: USB hub found
[   24.826959] hub 5-0:1.0: 8 ports detected
[   24.921781] Floppy drive(s): fd0 is 1.44M
[   24.930809] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   24.930854] skge 1.13 addr 0xfbffc000 irq 19 chip Yukon-Lite rev 9
[   24.931272] skge eth0: addr 00:18:f3:11:54:20
[   24.942388] FDC 0 is a post-1991 82077
[   24.947978] libata version 3.00 loaded.
[   24.950922] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   24.950934] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   24.951007] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   24.951029] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   24.959247] ata_piix 0000:00:1f.1: version 2.12
[   24.959276] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   24.959345] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   24.959466] scsi0 : ata_piix
[   24.959551] scsi1 : ata_piix
[   24.961978] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[   24.961984] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[   25.445716] ata1.00: ATAPI: PIONEER DVD-RW  DVR-109, 1.17, max UDMA/66
[   25.445745] ata1.01: ATAPI: SONY    DVD RW DRU-530A, 2.0b, max UDMA/33
[   25.445761] ata1.00: limited to UDMA/33 due to 40-wire cable
[   25.505296] usb 4-2: new full speed USB device using uhci_hcd and address 2
[   25.618487] ata1.00: configured for UDMA/33
[   25.677652] usb 4-2: configuration #1 chosen from 1 choice
[   25.790358] ata1.01: configured for UDMA/33
[   25.961687] ata2.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
[   25.961691] ata2.00: 78125000 sectors, multi 16: LBA48
[   25.961706] ata2.00: limited to UDMA/33 due to 40-wire cable
[   25.985657] ata2.00: configured for UDMA/33
[   25.992169] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.17 PQ: 0 ANSI: 5
[   25.993134] scsi 0:0:1:0: CD-ROM            SONY     DVD RW DRU-530A  2.0b PQ: 0 ANSI: 5
[   25.993321] scsi 1:0:0:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[   26.005090] Driver 'sr' needs updating - please use bus_type methods
[   26.010416] Driver 'sd' needs updating - please use bus_type methods
[   26.035597] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   26.035603] Uniform CD-ROM driver Revision: 3.20
[   26.035674] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   26.039475] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   26.039528] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   26.039789] sd 1:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
[   26.039813] sd 1:0:0:0: [sda] Write Protect is off
[   26.039817] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.039851] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.039928] sd 1:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
[   26.039948] sd 1:0:0:0: [sda] Write Protect is off
[   26.039953] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.039988] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.039998]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   26.047358] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   26.047393] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   26.063303]  sda1 sda2 < sda5 sda6 sda7 >
[   26.114855] sd 1:0:0:0: [sda] Attached SCSI disk
[   26.722780] Attempting manual resume
[   26.722786] swsusp: Resume From Partition 8:6
[   26.722788] PM: Checking swsusp image.
[   26.723036] PM: Resume from disk failed.
[   26.750328] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[   26.750341] ReiserFS: sda5: using ordered data mode
[   26.756146] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.757087] ReiserFS: sda5: checking transaction log (sda5)
[   26.799897] ReiserFS: sda5: Using r5 hash to sort names
[   38.086306] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   38.403729] parport_pc 00:06: reported by Plug and Play ACPI
[   38.403850] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   38.446881] iTCO_vendor_support: vendor-support=0
[   38.475436] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   38.475599] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   38.475653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   38.511246] Linux agpgart interface v0.102
[   38.627112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   38.703050] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   38.886183] intel_rng: FWH not detected
[   38.910195] agpgart: Detected an Intel 865 Chipset.
[   38.914166] agpgart: AGP aperture is 64M @ 0xec000000
[   39.257388] input: Power Button (FF) as /devices/virtual/input/input3
[   39.317852] ACPI: Power Button (FF) [PWRF]
[   39.317978] input: Power Button (CM) as /devices/virtual/input/input4
[   39.381831] ACPI: Power Button (CM) [PWRB]
[   40.449428] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 20
[   40.449475] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   40.525177] nvidia: module license 'NVIDIA' taints kernel.
[   40.731830] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[   40.868995] intel8x0_measure_ac97_clock: measured 52253 usecs
[   40.869002] intel8x0: clocking to 48000
[   40.870280] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   40.870627] NVRM: loading NVIDIA Linux x86 Kernel Module  71.86.04  Mon Jan 21 11:22:18 PST 2008
[   42.403247] loop: module loaded
[   42.444738] lp0: using parport0 (interrupt-driven).
[   42.515913] Adding 979924k swap on /dev/sda6.  Priority:-1 extents:1 across:979924k
[   84.056549] kjournald starting.  Commit interval 5 seconds
[   84.056555] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   84.056851] EXT3 FS on sda7, internal journal
[   84.056857] EXT3-fs: mounted filesystem with ordered data mode.
[   84.520965] ip_tables: (C) 2000-2006 Netfilter Core Team
[   84.963527] No dock devices found.
[   86.262402] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   86.262411] apm: disabled - APM is not SMP safe.
[   89.599104] ppdev: user-space parallel port driver
[   89.837245] audit(1217791506.532:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5456 profile="/usr/sbin/cupsd" namespace="default"
[   90.037717] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   90.037728] vboxdrv: Successfully done.
[   90.037732] vboxdrv: Found 2 processor cores.
[   90.037756] vboxdrv: fAsync=0 u64DiffCores=4425.
[   90.039012] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   90.039025] vboxdrv: Successfully loaded version 1.6.2 (interface 0x00070002).
[   90.420501] tun: Universal TUN/TAP device driver, 1.6
[   90.420512] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   91.874817] skge eth0: enabling interface
[   92.000564] Bluetooth: Core ver 2.11
[   92.000909] NET: Registered protocol family 31
[   92.000915] Bluetooth: HCI device and connection manager initialized
[   92.000922] Bluetooth: HCI socket layer initialized
[   92.058397] Bluetooth: L2CAP ver 2.9
[   92.058407] Bluetooth: L2CAP socket layer initialized
[   92.125510] Bluetooth: RFCOMM socket layer initialized
[   92.125537] Bluetooth: RFCOMM TTY layer initialized
[   92.125540] Bluetooth: RFCOMM ver 1.8
[   93.579251] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[   94.632210] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   94.632236] agpgart: Device is in legacy mode, falling back to 2.x
[   94.632246] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   94.632285] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   94.998700] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   94.998724] agpgart: Device is in legacy mode, falling back to 2.x
[   94.998734] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   94.998772] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   96.282585] NET: Registered protocol family 17
[   96.842534] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2006 Fabrice Bellard
[   96.842540] This is a proprietary product. Read the LICENSE file for more information
[   96.842543] Redistribution of this module is prohibited without authorization
[   96.842576] KQEMU installed, max_locked_mem=257636kB.
[   98.281140] Bridge firewalling registered
[   98.281679] vbinat0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   98.634108] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[  100.710946] /dev/vmmon[6096]: VMCI: Driver initialized.
[  100.711032] /dev/vmmon[6096]: Module vmmon: registered with major=10 minor=165
[  100.711077] /dev/vmmon[6096]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[  100.711081] /dev/vmmon[6096]: Module vmmon: initialized
[  101.352540] NET: Registered protocol family 10
[  101.353061] lo: Disabled Privacy Extensions
[  101.630276] /dev/vmnet: open called by PID 6183 (vmnet-bridge)
[  101.630302] /dev/vmnet: hub 0 does not exist, allocating memory.
[  101.630322] /dev/vmnet: port on hub 0 successfully opened
[  101.630345] bridge-eth0: enabling the bridge
[  101.630355] bridge-eth0: up
[  101.630359] bridge-eth0: already up
[  101.630363] bridge-eth0: attached
[  102.472349] /dev/vmnet: open called by PID 6199 (vmnet-dhcpd)
[  102.472368] /dev/vmnet: hub 1 does not exist, allocating memory.
[  102.472379] /dev/vmnet: port on hub 1 successfully opened
[  102.772793] /dev/vmnet: open called by PID 6213 (vmnet-dhcpd)
[  102.772814] /dev/vmnet: hub 8 does not exist, allocating memory.
[  102.772835] /dev/vmnet: port on hub 8 successfully opened
[  102.965710] /dev/vmnet: open called by PID 6220 (vmnet-natd)
[  102.965735] /dev/vmnet: port on hub 8 successfully opened
[  108.747885] /dev/vmnet: open called by PID 6305 (vmnet-netifup)
[  108.747914] /dev/vmnet: port on hub 1 successfully opened
[  112.118396] vbinat0: no IPv6 routers present
[  112.134361] eth0: no IPv6 routers present
[  112.479152] /dev/vmnet: open called by PID 6316 (vmnet-netifup)
[  112.479177] /dev/vmnet: port on hub 8 successfully opened
[  119.355428] vmnet1: no IPv6 routers present
[  122.680037] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.680094] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.760745] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.760789] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.765796] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.766138] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  122.956489] vmnet8: no IPv6 routers present
[  146.071992] usb 5-2: new high speed USB device using ehci_hcd and address 3
[  146.205837] usb 5-2: configuration #1 chosen from 1 choice
[  146.297960] usbcore: registered new interface driver libusual
[  146.334662] Initializing USB Mass Storage driver...
[  146.336726] scsi2 : SCSI emulation for USB Mass Storage devices
[  146.338397] usbcore: registered new interface driver usb-storage
[  146.338411] USB Mass Storage support registered.
[  146.338858] usb-storage: device found at 3
[  146.338864] usb-storage: waiting for device to settle before scanning
[  151.334392] usb-storage: device scan complete
[  151.334910] scsi 2:0:0:0: Direct-Access     Supra    DC 7900               PQ: 0 ANSI: 2
[  151.336610] sd 2:0:0:0: [sdb] 27904 512-byte hardware sectors (14 MB)
[  151.340981] sd 2:0:0:0: [sdb] Write Protect is off
[  151.340991] sd 2:0:0:0: [sdb] Mode Sense: 1f 00 00 08
[  151.340995] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  151.343591] sd 2:0:0:0: [sdb] 27904 512-byte hardware sectors (14 MB)
[  151.344592] sd 2:0:0:0: [sdb] Write Protect is off
[  151.344598] sd 2:0:0:0: [sdb] Mode Sense: 1f 00 00 08
[  151.344602] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  151.345230]  sdb: sdb1
[  151.347649] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  151.347969] sd 2:0:0:0: Attached scsi generic sg3 type 0
[  153.110963] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  153.111024] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  153.114114] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  153.114420] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  182.542952] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  182.543005] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  182.548320] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  182.548375] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  223.134229] usb 5-3: new high speed USB device using ehci_hcd and address 4
[  223.269202] usb 5-3: configuration #1 chosen from 1 choice
[  223.269709] scsi3 : SCSI emulation for USB Mass Storage devices
[  223.270104] usb-storage: device found at 4
[  223.270112] usb-storage: waiting for device to settle before scanning
[  228.263662] usb-storage: device scan complete
[  228.264283] scsi 3:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[  229.262584] sd 3:0:0:0: [sdc] 4014080 512-byte hardware sectors (2055 MB)
[  229.263457] sd 3:0:0:0: [sdc] Write Protect is off
[  229.263463] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  229.263470] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  229.266078] sd 3:0:0:0: [sdc] 4014080 512-byte hardware sectors (2055 MB)
[  229.266830] sd 3:0:0:0: [sdc] Write Protect is off
[  229.266835] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  229.266840] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  229.266846]  sdc: sdc1
[  229.267835] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[  229.267928] sd 3:0:0:0: Attached scsi generic sg4 type 0
[  231.576890] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  231.576960] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  232.080907] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  232.080952] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  351.207642] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  351.207699] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  353.765462] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  353.765515] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  353.768339] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  353.768383] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[  355.933178] usb 5-2: USB disconnect, address 3
[  372.827980] usb 5-3: USB disconnect, address 4
[ 2338.576230] usb 5-3: new high speed USB device using ehci_hcd and address 5
[ 2338.710972] usb 5-3: configuration #1 chosen from 1 choice
[ 2338.711552] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2338.711973] usb-storage: device found at 5
[ 2338.711981] usb-storage: waiting for device to settle before scanning
[ 2343.705576] usb-storage: device scan complete
[ 2343.708314] scsi 4:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[ 2343.710043] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 2343.710938] sd 4:0:0:0: [sdb] Write Protect is off
[ 2343.710948] sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 2343.710954] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2343.712043] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 2343.712928] sd 4:0:0:0: [sdb] Write Protect is off
[ 2343.712939] sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 2343.712944] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2343.712955]  sdb: sdb1
[ 2343.726208] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2343.726295] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2363.894544] usb 4-2: USB disconnect, address 2

Voilà j’espère que ça pourra te renseigner !
Bonne soirée.

#4 Le 03/08/2008, à 23:23

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

re
Mon message précédent est toujours d'actualité, mais je me permet de vous demander une autre question plus importante!
Alors voilà, sur mon ordi, j’ai en dualboot, windows xp pro et ubuntu 8.04.
Le problème c’est qu’ils sont les deux hors services, même en mode sans échec.
Xp a probablement des virus et linux, ça doit être un logiciel qui est la cause de tout ça.
SVP, comment puis-je faire pour que mon disque dur externe soit reconnu sous le mode live, afin que je puisse sauvegarder mes données avant de formater ?
(A l’heure ou je vous écrit, je me sert du live cd.)
Ce serais vraiment sympa si vous pouviez m’aidez.
Merci par avance!
Bonne soirée.

#5 Le 04/08/2008, à 01:32

wouldsmina

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

le disque dur est bien reconnu, est il formater en ntfs ou fat32?
si c'est en ntfs, il faut installer ntfs-3g... mais le mieux est de le formater en fat32
linux n'est pas sensible au virus, sauf si il a été installer avec wubi...
si c'est la cas suis cette doc http://doc.ubuntu-fr.org/wubi#comment_p … emarre_pas
a+

Hors ligne

#6 Le 04/08/2008, à 20:59

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Bonsoir, le disque dur externe est formaté en fat32!
Linux a été installé normalement, et non pas depuis xp.
Svp, comment puis-je lancer mon disque dur externe, sachant qu'il n'apparaît pas dans le poste de travail ?
(En ce moment, ce serait depuis le live cd, puisse que mes 2 OS sont toujours HS, et oui il faut bien que je sauvegarde mes données sur un support.)
Mais après, je souhaiterais l’utiliser sous linux une fois réinstallé.
@+

#7 Le 04/08/2008, à 21:42

wouldsmina

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

il faut monter le disque en ligne de commande, avec mount http://doc.ubuntu-fr.org/installation/mount_fstab
pour toi la commande serai:

sudo mkdir /media/disk
sudo mount -t vfat /dev/sd(qqchose) /media/disk

pour trouver le sd(qqchose) tape la commande dmesg et fouille dans les dernière ligne...
ou (comme j'ai l'habitude de faire) tape le dubut de la commande soit sudo mount -tvfat /dev/sd puis tape sur la touche tab pour que la suite s'écrive toute seul (ca a un nom mais je sais plus!). par exemple dans ton dmesg que tu m'a fourni:

[ 2338.576230] usb 5-3: new high speed USB device using ehci_hcd and address 5
[ 2338.710972] usb 5-3: configuration #1 chosen from 1 choice
[ 2338.711552] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2338.711973] usb-storage: device found at 5
[ 2338.711981] usb-storage: waiting for device to settle before scanning
[ 2343.705576] usb-storage: device scan complete
[ 2343.708314] scsi 4:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[ 2343.710043] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 2343.710938] sd 4:0:0:0: [sdb] Write Protect is off
[ 2343.710948] sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 2343.710954] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2343.712043] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 2343.712928] sd 4:0:0:0: [sdb] Write Protect is off
[ 2343.712939] sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 2343.712944] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2343.712955]  sdb: sdb1
[ 2343.726208] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2343.726295] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2363.894544] usb 4-2: USB disconnect, address 2
la ca donne:
sudo mount -t vfat /dev/sdb1 /media/disk

pour le reste des option de mount (monter avec les droits d'ecriture par exemple) je te laisse découvrir dans la doc...

Dernière modification par wouldsmina (Le 04/08/2008, à 21:47)

Hors ligne

#8 Le 04/08/2008, à 23:29

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Merci pour tes informations précédentes. J'ai réussi à le monter.
Mais j'ai un problème pour l'accès en écriture avec la commande :

sudo mount -o umask=0 /dev/sdb1 /media/win_d

STP, peux-tu m'aider ?
Merci.
@+ Bonne soirée.

#9 Le 04/08/2008, à 23:52

rmy

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Il ne me parrait pas normal pour un disque externe d'avoir à faire un montage systématique en ligne de commande ou à ajouter au fstab.

As-tu vérifié du côte des [urlhttp://doc.ubuntu-fr.org/uuid_et_label=]uuid[/url] (différence notable entre 6.06 et 8.04 il me semble)


récupération de données : vractopic uniquemon site pro : www.diskcard.fr
Je récupère et recycle volontiers tous vos disques durs HS (ou pas).
BLACKOUT

Hors ligne

#10 Le 05/08/2008, à 01:27

wouldsmina

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

c'est toujours délicat ce truc!!! ajoute l'option rw
sudo mount -o umask=0,rw /dev/sdb1 /media/win_d

par contre vérifie le umask=0 dans mes souvenir c'est pas comme ca!

Hors ligne

#11 Le 05/08/2008, à 11:13

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

En ce qui concerne le umask=0:
voici ce que j'ai trouvé dans la doc que tu m'as donné:

Une autre option intéressante est de pouvoir choisir les droits par défaut sur le volume. Cas concret : vous avez une partition en vfat sur votre disque dur, venue on ne sait d'où. Vous voudriez, en tant qu'utilisateur lambda, pouvoir lire et écrire dessus. Le système de fichier vfat ne spécifiant aucun droit, nous devons les lui spécifier lors du montage. Il faut alors indiquer à mount la valeur de umask adéquate (google umask) grâce à l'option homonyme.
login@ubuntu:login$ sudo mount -o umask=0 /dev/hda7 /media/win_d
Password:
login@ubuntu:login$ ls /media/win_d
cygwin                  pagefile.sys   Recycled                   
Documents and Settings  Perl           System Volume Information 
musique                 Program Files  windows
Cette méthode a un inconvénient : les autorisations en exécution sont nécessaires pour les répertoires mais pénibles pour les fichiers. On peut alors préciser un umask pour chacun d'eux :
login@ubuntu:login$ sudo mount -o fmask=111 -o dmask=0 /dev/hda7 /media/win_d

Donc, je pense que c'est bien la commande:
sudo mount -o umask=0,rw /dev/sdb1 /media/win_d
Nan qu'es ce que tu en penses ?
media/win_d c'est quoi ?

#12 Le 05/08/2008, à 11:57

rmy

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

/media/win_d c'est le nom du point de montage.
Et les uuid ?


récupération de données : vractopic uniquemon site pro : www.diskcard.fr
Je récupère et recycle volontiers tous vos disques durs HS (ou pas).
BLACKOUT

Hors ligne

#13 Le 05/08/2008, à 19:26

wouldsmina

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

les uuid? c'est pas indispensable...
pour le dossier /media/win_d il doit etre créé...

Hors ligne

#14 Le 05/08/2008, à 22:48

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Bonsoir,
J'ai un problème avec le live cd. Je n'arrive plus à monter mon disque dur externe, même en redémarrant le live cd.
Quand je tape dmesg, et sudo mount -t vfat /dev/sdc1 /media/disk à la fin,
voici ce que j'ai :

[   32.551415] console [tty0] enabled
[   32.551825] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   32.552135] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   32.562116] Memory: 507044k/523968k available (2157k kernel code, 16308k reserved, 998k data, 364k init, 0k highmem)
[   32.562125] virtual kernel memory layout:
[   32.562126]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   32.562127]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   32.562128]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   32.562129]     lowmem  : 0xc0000000 - 0xdffb0000   ( 511 MB)
[   32.562130]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   32.562131]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   32.562132]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   32.562135] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   32.562175] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   32.642156] Calibrating delay using timer specific routine.. 5989.91 BogoMIPS (lpj=11979824)
[   32.642184] Security Framework initialized
[   32.642189] SELinux:  Disabled at boot.
[   32.642205] AppArmor: AppArmor initialized
[   32.642209] Failure registering capabilities with primary security module.
[   32.642218] Mount-cache hash table entries: 512
[   32.642351] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 00000000
[   32.642361] monitor/mwait feature present.
[   32.642363] using mwait in idle threads.
[   32.642369] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   32.642372] CPU: L2 cache: 1024K
[   32.642375] CPU: Physical Processor ID: 0
[   32.642377] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000641d 00000000 00000001 00000000
[   32.642389] Compat vDSO mapped to ffffe000.
[   32.642405] Checking 'hlt' instruction... OK.
[   32.658627] SMP alternatives: switching to UP code
[   32.660597] Early unpacking initramfs... done
[   32.971026] ACPI: Core revision 20070126
[   32.971087] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   32.973032] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[   32.973057] SMP alternatives: switching to SMP code
[   32.973985] Booting processor 1/1 eip 3000
[   32.984340] Initializing CPU#1
[   33.061947] Calibrating delay using timer specific routine.. 5985.48 BogoMIPS (lpj=11970976)
[   33.061958] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 00000000
[   33.061966] monitor/mwait feature present.
[   33.061973] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   33.061976] CPU: L2 cache: 1024K
[   33.061979] CPU: Physical Processor ID: 0
[   33.061981] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000641d 00000000 00000001 00000000
[   33.062362] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[   33.062407] Total of 2 processors activated (11975.40 BogoMIPS).
[   33.062538] ENABLING IO-APIC IRQs
[   33.062717] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   33.210038] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   33.230046] Brought up 2 CPUs
[   33.230076] CPU0 attaching sched-domain:
[   33.230079]  domain 0: span 03
[   33.230082]   groups: 01 02
[   33.230085]   domain 1: span 03
[   33.230087]    groups: 03
[   33.230090] CPU1 attaching sched-domain:
[   33.230092]  domain 0: span 03
[   33.230094]   groups: 02 01
[   33.230097]   domain 1: span 03
[   33.230099]    groups: 03
[   33.230387] net_namespace: 64 bytes
[   33.230399] Booting paravirtualized kernel on bare hardware
[   33.231042] Time: 23:22:30  Date: 08/05/08
[   33.231071] NET: Registered protocol family 16
[   33.231341] EISA bus registered
[   33.231348] ACPI: bus type pci registered
[   33.231748] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[   33.231751] PCI: Using configuration type 1
[   33.231753] Setting up standard PCI resources
[   33.243664] ACPI: EC: Look up EC in DSDT
[   33.246899] ACPI: Interpreter enabled
[   33.246903] ACPI: (supports S0 S1 S3 S4 S5)
[   33.246922] ACPI: Using IOAPIC for interrupt routing
[   33.253910] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.254417] Force enabled HPET at base address 0xfed00000
[   33.254425] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[   33.254429] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[   33.254813] PCI: Transparent bridge - 0000:00:1e.0
[   33.254839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.254940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   33.260412] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   33.260516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   33.260621] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   33.260725] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   33.260829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.260937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.261041] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   33.261147] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   33.261293] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  2B, should be 1E [20070126]
[   33.261300] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.261340] pnp: PnP ACPI init
[   33.261350] ACPI: bus type pnp registered
[   33.264885] pnp: PnP ACPI: found 14 devices
[   33.264888] ACPI: ACPI bus type pnp unregistered
[   33.264892] PnPBIOS: Disabled by ACPI PNP
[   33.265203] PCI: Using ACPI for IRQ routing
[   33.265207] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   33.289926] NET: Registered protocol family 8
[   33.289929] NET: Registered protocol family 20
[   33.290048] hpet clockevent registered
[   33.290054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   33.290059] hpet0: 3 64-bit timers, 14318180 Hz
[   33.291109] AppArmor: AppArmor Filesystem Enabled
[   33.293921] Time: tsc clocksource has been installed.
[   33.306017] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   33.306021] system 00:07: ioport range 0x800-0x87f has been reserved
[   33.306024] system 00:07: ioport range 0x400-0x41f has been reserved
[   33.306026] system 00:07: ioport range 0x480-0x4bf has been reserved
[   33.306029] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[   33.306032] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[   33.306039] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[   33.306041] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[   33.306050] system 00:0c: ioport range 0x290-0x297 has been reserved
[   33.306057] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   33.306060] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[   33.306062] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   33.306065] system 00:0d: iomem range 0x100000-0x1ffeffff could not be reserved
[   33.306068] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[   33.336601] PCI: Bridge: 0000:00:01.0
[   33.336605]   IO window: d000-dfff
[   33.336609]   MEM window: fa000000-fbefffff
[   33.336613]   PREFETCH window: f0000000-f8ffffff
[   33.336619] PCI: Bridge: 0000:00:1e.0
[   33.336622]   IO window: e000-efff
[   33.336627]   MEM window: fbf00000-fbffffff
[   33.336631]   PREFETCH window: disabled.
[   33.336649] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   33.336662] NET: Registered protocol family 2
[   33.374177] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   33.374438] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   33.374526] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   33.374623] TCP: Hash tables configured (established 16384 bind 16384)
[   33.374626] TCP reno registered
[   33.386272] checking if image is initramfs... it is
[   33.790089] Switched to high resolution mode on CPU 1
[   33.793921] Switched to high resolution mode on CPU 0
[   34.002027] Freeing initrd memory: 7665k freed
[   34.003114] audit: initializing netlink socket (disabled)
[   34.003144] audit(1217978551.320:1): initialized
[   34.005795] VFS: Disk quotas dquot_6.5.1
[   34.005899] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   34.006074] io scheduler noop registered
[   34.006076] io scheduler anticipatory registered
[   34.006078] io scheduler deadline registered
[   34.006090] io scheduler cfq registered (default)
[   34.006183] Boot video device is 0000:01:00.0
[   34.006544] isapnp: Scanning for PnP cards...
[   34.358293] isapnp: No Plug & Play device found
[   34.395730] Real Time Clock Driver v1.12ac
[   34.395868] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.396002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.396981] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.398332] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.398422] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   34.398559] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   34.401413] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.401420] serio: i8042 AUX port at 0x60,0x64 irq 12
[   34.425448] mice: PS/2 mouse device common for all mice
[   34.425605] EISA: Probing bus 0 at eisa.0
[   34.425643] EISA: Detected 0 cards.
[   34.425648] cpuidle: using governor ladder
[   34.425650] cpuidle: using governor menu
[   34.425747] NET: Registered protocol family 1
[   34.425782] Using IPI No-Shortcut mode
[   34.425819] registered taskstats version 1
[   34.425912]   Magic number: 4:650:402
[   34.426083] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   34.426085] EDD information not available.
[   34.426498] Freeing unused kernel memory: 364k freed
[   34.450595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   35.650393] fuse init (API version 7.9)
[   35.759952] ACPI Warning (tbutils-0217): Incorrect checksum in table [  ��] -  00, should be A5 [20070126]
[   35.759971] ACPI Error (tbinstal-0134): Table has invalid signature [  ��], must be SSDT, PSDT or OEMx [20070126]
[   35.759994] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node dddcd180), AE_BAD_SIGNATURE
[   35.760073] ACPI: Processor [CPU1] (supports 8 throttling states)
[   35.843350] ACPI Warning (tbutils-0217): Incorrect checksum in table [  ��] -  00, should be A5 [20070126]
[   35.843367] ACPI Error (tbinstal-0134): Table has invalid signature [  ��], must be SSDT, PSDT or OEMx [20070126]
[   35.843388] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node dddcd240), AE_BAD_SIGNATURE
[   35.843442] ACPI: Processor [CPU2] (supports 8 throttling states)
[   35.843460] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   35.843474] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   35.992611] usbcore: registered new interface driver usbfs
[   35.992650] usbcore: registered new interface driver hub
[   35.992691] usbcore: registered new device driver usb
[   35.994556] USB Universal Host Controller Interface driver v3.0
[   35.994673] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   35.994693] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   35.994698] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   35.995066] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   35.995105] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[   35.995319] usb usb1: configuration #1 chosen from 1 choice
[   35.995363] hub 1-0:1.0: USB hub found
[   35.995373] hub 1-0:1.0: 2 ports detected
[   36.100578] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
[   36.100596] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   36.100602] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   36.100642] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   36.100675] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c000
[   36.100854] usb usb2: configuration #1 chosen from 1 choice
[   36.100892] hub 2-0:1.0: USB hub found
[   36.100901] hub 2-0:1.0: 2 ports detected
[   36.204518] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   36.204536] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   36.204542] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   36.204580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   36.204613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[   36.204795] usb usb3: configuration #1 chosen from 1 choice
[   36.204835] hub 3-0:1.0: USB hub found
[   36.204845] hub 3-0:1.0: 2 ports detected
[   36.308472] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[   36.308490] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   36.308496] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   36.308538] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   36.308567] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
[   36.308750] usb usb4: configuration #1 chosen from 1 choice
[   36.308790] hub 4-0:1.0: USB hub found
[   36.308799] hub 4-0:1.0: 2 ports detected
[   36.370632] SCSI subsystem initialized
[   36.412485] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   36.412509] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   36.412515] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   36.412554] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   36.416469] ehci_hcd 0000:00:1d.7: debug port 1
[   36.416480] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   36.416498] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9fffc00
[   36.432234] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   36.432442] usb usb5: configuration #1 chosen from 1 choice
[   36.432482] hub 5-0:1.0: USB hub found
[   36.432493] hub 5-0:1.0: 8 ports detected
[   36.444521] libata version 3.00 loaded.
[   36.523780] Floppy drive(s): fd0 is 1.44M
[   36.536691] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   36.536746] skge 1.13 addr 0xfbffc000 irq 19 chip Yukon-Lite rev 9
[   36.537211] skge eth0: addr 00:18:f3:11:54:20
[   36.543730] FDC 0 is a post-1991 82077
[   36.560953] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   36.560965] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   36.561023] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.561040] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   36.592364] ata_piix 0000:00:1f.1: version 2.12
[   36.592392] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   36.592457] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.604683] scsi0 : ata_piix
[   36.607848] scsi1 : ata_piix
[   36.609999] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[   36.610004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[   37.096264] ata1.00: ATAPI: PIONEER DVD-RW  DVR-109, 1.17, max UDMA/66
[   37.096302] ata1.01: ATAPI: SONY    DVD RW DRU-530A, 2.0b, max UDMA/33
[   37.096324] ata1.00: limited to UDMA/33 due to 40-wire cable
[   37.264173] ata1.00: configured for UDMA/33
[   37.435911] ata1.01: configured for UDMA/33
[   37.624264] ata2.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
[   37.624268] ata2.00: 78125000 sectors, multi 16: LBA48
[   37.624283] ata2.00: limited to UDMA/33 due to 40-wire cable
[   37.648176] ata2.00: configured for UDMA/33
[   37.654377] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.17 PQ: 0 ANSI: 5
[   37.655213] scsi 0:0:1:0: CD-ROM            SONY     DVD RW DRU-530A  2.0b PQ: 0 ANSI: 5
[   37.655396] scsi 1:0:0:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[   37.666540] Driver 'sr' needs updating - please use bus_type methods
[   37.672690] Driver 'sd' needs updating - please use bus_type methods
[   37.673432] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[   37.673438] Uniform CD-ROM driver Revision: 3.20
[   37.673502] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   37.678799] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   37.678879] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   37.679011] sd 1:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
[   37.679034] sd 1:0:0:0: [sda] Write Protect is off
[   37.679039] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.679075] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.679139] sd 1:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
[   37.679157] sd 1:0:0:0: [sda] Write Protect is off
[   37.679161] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.679199] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.679207]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   37.687256] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   37.687294] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   37.702098]  sda1 sda2 < sda5 sda6end_request: I/O error, dev fd0, sector 0
[   37.745163]  sda7 >
[   37.745440] sd 1:0:0:0: [sda] Attached SCSI disk
[   38.794982] end_request: I/O error, dev fd0, sector 0
[   39.185744] kjournald starting.  Commit interval 5 seconds
[   39.185760] EXT3-fs: mounted filesystem with ordered data mode.
[   39.930805] ISO 9660 Extensions: Microsoft Joliet Level 3
[   40.037685] ISO 9660 Extensions: RRIP_1991A
[   40.239926] Registering unionfs 1.4
[   40.239933] unionfs: debugging is not enabled
[   40.250210] loop: module loaded
[   40.472618] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[  157.397694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  157.543967] iTCO_vendor_support: vendor-support=0
[  157.593585] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[  157.593729] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[  157.593776] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  157.815925] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  157.912452] Linux agpgart interface v0.102
[  158.012835] input: PC Speaker as /devices/platform/pcspkr/input/input2
[  158.235719] intel_rng: FWH not detected
[  158.326752] agpgart: Detected an Intel 865 Chipset.
[  158.330860] agpgart: AGP aperture is 64M @ 0xec000000
[  158.552658] input: Power Button (FF) as /devices/virtual/input/input3
[  158.575374] ACPI: Power Button (FF) [PWRF]
[  158.575533] input: Power Button (CM) as /devices/virtual/input/input4
[  158.607338] ACPI: Power Button (CM) [PWRB]
[  158.874373] parport_pc 00:06: reported by Plug and Play ACPI
[  158.874495] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[  160.100469] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[  160.145199] ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 20
[  160.145237] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[  160.570265] intel8x0_measure_ac97_clock: measured 56139 usecs
[  160.570271] intel8x0: clocking to 48000
[  162.962148] Adding 979924k swap on /dev/sda6.  Priority:-1 extents:1 across:979924k
[  163.517548] ip_tables: (C) 2000-2006 Netfilter Core Team
[  164.955215] No dock devices found.
[  168.723087] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  168.723098] apm: disabled - APM is not SMP safe.
[  168.916422] lp0: using parport0 (interrupt-driven).
[  168.979926] ppdev: user-space parallel port driver
[  173.662739] skge eth0: enabling interface
[  173.944501] Bluetooth: Core ver 2.11
[  173.948408] NET: Registered protocol family 31
[  173.948416] Bluetooth: HCI device and connection manager initialized
[  173.948424] Bluetooth: HCI socket layer initialized
[  174.012429] Bluetooth: L2CAP ver 2.9
[  174.012439] Bluetooth: L2CAP socket layer initialized
[  174.252957] Bluetooth: RFCOMM socket layer initialized
[  174.252982] Bluetooth: RFCOMM TTY layer initialized
[  174.252985] Bluetooth: RFCOMM ver 1.8
[  175.443781] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[  178.887481] NET: Registered protocol family 17
[  182.256286] NET: Registered protocol family 10
[  182.256746] lo: Disabled Privacy Extensions
[  193.180662] eth0: no IPv6 routers present
[  245.467472] usb 5-3: new high speed USB device using ehci_hcd and address 2
[  245.602171] usb 5-3: configuration #1 chosen from 1 choice
[  245.912024] usbcore: registered new interface driver libusual
[  246.053727] Initializing USB Mass Storage driver...
[  246.053981] scsi2 : SCSI emulation for USB Mass Storage devices
[  246.054097] usbcore: registered new interface driver usb-storage
[  246.054103] USB Mass Storage support registered.
[  246.054588] usb-storage: device found at 2
[  246.054592] usb-storage: waiting for device to settle before scanning
[  251.049646] usb-storage: device scan complete
[  251.052391] scsi 2:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[  251.054250] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[  251.055479] sd 2:0:0:0: [sdb] Write Protect is off
[  251.055488] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
[  251.055494] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  251.056608] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[  251.057631] sd 2:0:0:0: [sdb] Write Protect is off
[  251.057636] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
[  251.057638] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  251.057643]  sdb: sdb1
[  251.082800] sd 2:0:0:0: [sdb] Attached SCSI disk
[  251.082895] sd 2:0:0:0: Attached scsi generic sg3 type 0
[  760.442807] usb 5-3: USB disconnect, address 2
[  760.464675] FAT: Directory bread(block 152618) failed
[  760.464697] FAT: Directory bread(block 152619) failed
[  760.464708] FAT: Directory bread(block 152620) failed
[  760.464719] FAT: Directory bread(block 152621) failed
[  760.464730] FAT: Directory bread(block 152622) failed
[  760.464741] FAT: Directory bread(block 152623) failed
[  760.464752] FAT: Directory bread(block 152624) failed
[  760.464763] FAT: Directory bread(block 152625) failed
[  760.464774] FAT: Directory bread(block 152626) failed
[  760.464785] FAT: Directory bread(block 152627) failed
[  760.464796] FAT: Directory bread(block 152628) failed
[  760.464807] FAT: Directory bread(block 152629) failed
[  760.464817] FAT: Directory bread(block 152630) failed
[  760.464827] FAT: Directory bread(block 152631) failed
[  760.464837] FAT: Directory bread(block 152632) failed
[  760.464847] FAT: Directory bread(block 152633) failed
[  760.464860] FAT: Directory bread(block 152634) failed
[  760.464872] FAT: Directory bread(block 152635) failed
[  760.464884] FAT: Directory bread(block 152636) failed
[  760.464897] FAT: Directory bread(block 152637) failed
[  760.464909] FAT: Directory bread(block 152638) failed
[  760.464921] FAT: Directory bread(block 152639) failed
[  760.464934] FAT: Directory bread(block 152640) failed
[  760.464946] FAT: Directory bread(block 152641) failed
[  760.464958] FAT: Directory bread(block 152642) failed
[  760.464971] FAT: Directory bread(block 152643) failed
[  760.464983] FAT: Directory bread(block 152644) failed
[  760.464996] FAT: Directory bread(block 152645) failed
[  760.465009] FAT: Directory bread(block 152646) failed
[  760.465022] FAT: Directory bread(block 152647) failed
[  760.465034] FAT: Directory bread(block 152648) failed
[  760.465046] FAT: Directory bread(block 152649) failed
[  760.465059] FAT: Directory bread(block 152650) failed
[  760.465071] FAT: Directory bread(block 152651) failed
[  760.465084] FAT: Directory bread(block 152652) failed
[  760.465096] FAT: Directory bread(block 152653) failed
[  760.465109] FAT: Directory bread(block 152654) failed
[  760.465121] FAT: Directory bread(block 152655) failed
[  760.465133] FAT: Directory bread(block 152656) failed
[  760.465146] FAT: Directory bread(block 152657) failed
[  760.465158] FAT: Directory bread(block 152658) failed
[  760.465171] FAT: Directory bread(block 152659) failed
[  760.465183] FAT: Directory bread(block 152660) failed
[  760.465196] FAT: Directory bread(block 152661) failed
[  760.465209] FAT: Directory bread(block 152662) failed
[  760.465221] FAT: Directory bread(block 152663) failed
[  760.465233] FAT: Directory bread(block 152664) failed
[  760.465245] FAT: Directory bread(block 152665) failed
[  760.465258] FAT: Directory bread(block 152666) failed
[  760.465271] FAT: Directory bread(block 152667) failed
[  760.465283] FAT: Directory bread(block 152668) failed
[  760.465296] FAT: Directory bread(block 152669) failed
[  760.465309] FAT: Directory bread(block 152670) failed
[  760.465322] FAT: Directory bread(block 152671) failed
[  760.465334] FAT: Directory bread(block 152672) failed
[  760.465347] FAT: Directory bread(block 152673) failed
[  760.465360] FAT: Directory bread(block 152674) failed
[  760.465372] FAT: Directory bread(block 152675) failed
[  760.465385] FAT: Directory bread(block 152676) failed
[  760.465397] FAT: Directory bread(block 152677) failed
[  760.465409] FAT: Directory bread(block 152678) failed
[  760.465421] FAT: Directory bread(block 152679) failed
[  760.465434] FAT: Directory bread(block 152680) failed
[  760.465446] FAT: Directory bread(block 152681) failed
[  785.532033] usb 5-5: new high speed USB device using ehci_hcd and address 3
[  785.666691] usb 5-5: configuration #1 chosen from 1 choice
[  785.672028] scsi3 : SCSI emulation for USB Mass Storage devices
[  785.675727] usb-storage: device found at 3
[  785.675739] usb-storage: waiting for device to settle before scanning
[  790.669434] usb-storage: device scan complete
[  790.672177] scsi 3:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[  790.673790] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[  790.674670] sd 3:0:0:0: [sdc] Write Protect is off
[  790.674676] sd 3:0:0:0: [sdc] Mode Sense: 27 00 00 00
[  790.674682] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  790.675787] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[  790.676645] sd 3:0:0:0: [sdc] Write Protect is off
[  790.676651] sd 3:0:0:0: [sdc] Mode Sense: 27 00 00 00
[  790.676655] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[  790.676662]  sdc: sdc1
[  790.689189] sd 3:0:0:0: [sdc] Attached SCSI disk
[  790.689278] sd 3:0:0:0: Attached scsi generic sg3 type 0
ubuntu@ubuntu:~$ sudo mount -t vfat /dev/sdc1 /media/disk
mount: le point de montage /media/disk n'existe pas

Et pourtant avant celà marchait ! (en lecture)
SVP, et comment faut-il que je fasse pour l'écriture ?
Des réponses pour mon problème et pour l'écriture ?
Merci par avance ! Bonne soirée
Ciao

#15 Le 06/08/2008, à 00:07

rmy

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

mount: le point de montage /media/disk n'existe pas

sudo mkdir /media/disk


récupération de données : vractopic uniquemon site pro : www.diskcard.fr
Je récupère et recycle volontiers tous vos disques durs HS (ou pas).
BLACKOUT

Hors ligne

#16 Le 06/08/2008, à 13:43

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Bonjour, merci bien pour ta ligne de commande. J'ai réussi à le remonter, mais qu'en lecture seulement !
STP as-tu une astuce pour que je puisse le monter aussi en écriture?
Merci.
Bonne journée

#17 Le 06/08/2008, à 15:03

rmy

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

as tu essayé avec mount -o rw ?
(question subsidiaire : as tu lu le man mount ?
deuxième question subsidiaire : je n'arrive pas bien à cerner ton niveau, peux-tu le préciser ?)


récupération de données : vractopic uniquemon site pro : www.diskcard.fr
Je récupère et recycle volontiers tous vos disques durs HS (ou pas).
BLACKOUT

Hors ligne

#18 Le 06/08/2008, à 15:40

Flegmatik

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

souvent il suffit de le rebrancher à un pc sous windows de retirer le périphérique en toute sécurité et le tour est joué wink


In love with Ubuntu !

Hors ligne

#19 Le 06/08/2008, à 18:43

rmy

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

si le problème vient de là, linux signale une impossibilité de monter le périph car il a été mal démonté sous windows. Je ne crois pas que ce soit le cas ici. Toutefois il n'est pas nécessaire d'avoir windows dans ce cas : monter avec mount -f et redémonter proprement sous linux. Après c'est reglé...


récupération de données : vractopic uniquemon site pro : www.diskcard.fr
Je récupère et recycle volontiers tous vos disques durs HS (ou pas).
BLACKOUT

Hors ligne

#20 Le 06/08/2008, à 21:23

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Avec la commande mount -o rw voici ce qu’il met :

sudo mount -o rw /dev/sde1 /media/disk

mount: /dev/sde1 est déjà monté ou /media/disk est occupé

mount: selon mtab /dev/sdb1 est déjà monté sur /media/disk


Quand au man mount, j’ai regardé (traduit en français par google) !
Apparemment, il n’y a pas la commande pour l’écriture !

Je suis débutant sous linux, voilà pourquoi ce n’est pas simple pour moi.
Et pour la dernière fois qu’il a été déconnecté sous windows, cela a été fait correctement!
Il ne me manque plus que le droit d'écriture pour mon disque.
Des autres suggestions?
Merci

#21 Le 06/08/2008, à 22:34

fergo

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

:)essaie de debrancher ton hd ,d'eteindre puis de le rebrancher une fois ta session ubuntu ouverte.Mais je ne suis qu'un petit linuxien

Hors ligne

#22 Le 06/08/2008, à 22:47

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Merci de me donner un petit coup de pouce. Mais tournant sur le live cd, (car mes OS sont HS) il faut que je le remonte tout le temps dès qu'il n'est plus branché.

#23 Le 06/08/2008, à 23:08

Raphi58

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

Quelqu'un pourait m'aider ? SVP
C'est urgent, car je doit sauvegarder mes données et reformatter mon pc.

#24 Le 06/08/2008, à 23:20

fergo

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

c'est vrai que c'est bizarre,qu'il ne reconnaisse pas ton hd automatiquement.

Hors ligne

#25 Le 06/08/2008, à 23:25

fergo

Re : [Résolu] Disque dur externe non reconnu sur Ubuntu 8.04

le hd fait 320 go?peut'etre qu'il est trop gros? essaie une cle usb ou deux ou trois ou...

Hors ligne

Haut de page ↑