Pages : 1
#1 Le 28/05/2015, à 15:21
- ycod48
[Résolu] Le bootage sur le disque ne se fait pas
Bonjour,
Installant en LiveUSB la derniere version de ubuntu : Ubuntu 14.04.2 , cette installation a bien fonctionne.
Mon option: tout le disque pour Ubuntu.
Mon ordi est un Packard bell iMedia S AK4G1TU03 avec Windows 8 et le UEFI au depart.
Au redemarrage je ne cesse d'avoir le message "Reboot and select proper boot device..."
Le Bios a pour options : Secure Boot : "disabled", Launch CSM : "never". L'ordre de bootage a en premier un
"UEFI ..." et en second "Remote device". Je parviens parfois sur la clef USB et on me demande si je veux installer Ubuntu , lequel est deja sur le disque ...
En chargeant Boot-Repair et en demandant un rapport, celui-ci est sur le lien :
http://paste.ubuntu.com/11411483 ou en copie ci-dessous .
Merci de votre aide pour un "vieux" de 66 ans. Que faut-il faire ?
Rapport :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 9626272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,946,320,895 1,945,270,272 Data partition (Linux)
/dev/sda3 1,946,320,896 1,953,523,711 7,202,816 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.0 GB, 31009800192 bytes
86 heads, 22 sectors/track, 32011 cylinders, total 60566016 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 60,566,015 60,557,952 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 5221-465F vfat
/dev/sda2 34586662-d5cc-486b-a81a-043866c2b525 ext4
/dev/sda3 2cb06848-e42d-459c-ae33-a3bbacdb31f8 swap
/dev/sdb1 F599-F2EE vfat USB DISK
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 28 12:43 ata-MATSHITA_DVD-RAM_SW830_KO0160700432 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 28 12:48 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304 -> ../../sda
lrwxrwxrwx 1 root root 10 May 28 12:43 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 28 12:43 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 28 12:43 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 May 28 12:48 usb-_USB_DISK_2.0_070B52A168154046-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 28 12:43 usb-_USB_DISK_2.0_070B52A168154046-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 May 28 12:48 wwn-0x50014ee25e53a2af -> ../../sda
lrwxrwxrwx 1 root root 10 May 28 12:43 wwn-0x50014ee25e53a2af-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 28 12:43 wwn-0x50014ee25e53a2af-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 28 12:43 wwn-0x50014ee25e53a2af-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
linux /boot/vmlinuz-3.16.0-38-generic.efi.signed root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-38-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
menuentry 'Ubuntu, with Linux 3.16.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-38-generic ...'
linux /boot/vmlinuz-3.16.0-38-generic.efi.signed root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-recovery-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-38-generic ...'
linux /boot/vmlinuz-3.16.0-38-generic.efi.signed root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-30-generic ...'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-30-generic ...'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 5221-465F
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=34586662-d5cc-486b-a81a-043866c2b525 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=5221-465F /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=2cb06848-e42d-459c-ae33-a3bbacdb31f8 none swap sw 0 0
UUID=5221-465F /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4821/mounts) leaked on lvs invocation. Parent PID 11223: bash
File descriptor 63 (pipe:[49751]) leaked on lvs invocation. Parent PID 11223: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-05-28__12h48 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="5221-465F" TYPE="vfat"
/dev/sda2: UUID="34586662-d5cc-486b-a81a-043866c2b525" TYPE="ext4"
/dev/sda3: UUID="2cb06848-e42d-459c-ae33-a3bbacdb31f8" TYPE="swap"
/dev/sdb1: LABEL="USB DISK" UUID="F599-F2EE" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 28 09:47 grub.d
total 80
-rwxr-xr-x 1 root root 9424 May 15 2014 00_header
-rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 170 May 28 09:47 25_custom
-rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 15 2014 40_custom
-rwxr-xr-x 1 root root 216 May 15 2014 41_custom
-rw-r--r-- 1 root root 483 May 15 2014 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=5221-465F (sda1)
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0001
Boot0001 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...0................
Boot0002* UEFI: USB DISK 2.0 PMAP ACPI(a0341d0,0)PCI(13,2)USB(2,0)HD(1,1f80,39c0a80,0002cb73)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-22R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 997GB 996GB ext4
3 997GB 1000GB 3688MB linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 31.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 31.0GB 31.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-22R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:997GB:996GB:ext4::;
3:997GB:1000GB:3688MB:linux-swap(v1)::;
BYT;
/dev/sdb:31.0GB:scsi:512:512:msdos: USB DISK 2.0;
1:4129kB:31.0GB:31.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931.5G WDC WD10
sda1 part vfat 512M 5221-465F
sda2 part ext4 927.6G 34586662-d5cc-486b-a81a-043866c2b525
sda3 part swap 3.4G 2cb06848-e42d-459c-ae33-a3bbacdb31f8
sdb disk 28.9G USB DISK
sdb1 part vfat 28.9G USB DISK F599-F2EE
sr0 rom 1024M DVD-RAM
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 5f 46 21 52 4e 4f 20 4e 41 4d 45 20 20 |..)_F!RNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 91M 1.6G 6% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.2M 331M 1% /run
/dev/sdb1 vfat 29G 2.0G 27G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 1.3M 1.7G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 76K 1.7G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 vfat 511M 7.3M 504M 2% /mnt/boot-sav/sda1
/dev/sda2 ext4 913G 6.2G 861G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x77dffce6
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 31.0 GB, 31009800192 bytes
86 heads, 22 sectors/track, 32011 cylinders, total 60566016 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002cb73
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 60566015 30278976 c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== User settings
The settings chosen by the user will not act on the boot.
Download as text
merci de mettre le retour de vos commandes entre des balises code c'est l'icone <> au dessus de la zone de texte voir l'exemple ci dessous
Dernière modification par ycod48 (Le 29/05/2015, à 19:14)
Hors ligne
#2 Le 28/05/2015, à 16:20
- Scr7zon
Re : [Résolu] Le bootage sur le disque ne se fait pas
Bonjour ,
Mon option: tout le disque pour Ubuntu.
Tu as formaté ton disque pour installé Ubuntu en cochant cette option ( plus de windows 8)
C'est l'uefi qui bride le démmarage sur windows (bien qu'il n'existe plus )
Accède a boot-repair, et rentre y ces options dans Option Avancée :
Main options
Réinstall Grub
Use the standard EFI file
Unhide boot menu : 10sec
Repair file system
Grub options
Purge GRUB before réinstalling IT
lance , et redémarre si besoin .
Ce n'est pas un signe de bonne santé mentale d'être bien adapté à une société malade.
Hors ligne
#3 Le 28/05/2015, à 17:00
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Bonjour,
La manip proposée a été faite. J'ai alors eu Unity tout beau sur mon ordi: j'ai cru que cela y était !
Mais quand j'éteins et rallume l'ordi, on retombe sur le même message .
N'y a-t-il pas aussi un problème qui viendrait du BIOS ?
Merci quand même de l'aide déjà apportée
Hors ligne
#4 Le 28/05/2015, à 17:26
- Scr7zon
Re : [Résolu] Le bootage sur le disque ne se fait pas
Si je pense , le secure est toujours désactivé ?
Il faut aussi désactivé fast boot , Ubuntu est en premier dans votre ordre de démarrage ?
Tapez ça sur une ligne de commande :
efibootmgr -v
Et collez le ici
Vous avez bien vu que ubuntu marchait , il boot juste pas deçu x)
Ce n'est pas un signe de bonne santé mentale d'être bien adapté à une société malade.
Hors ligne
#5 Le 28/05/2015, à 17:54
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Rebonjour,
1- Il faudrait réactiver le secure Boot ?
2- Desactiver fast boot, j'ignore ce que cela veut dire, désolé
3- Ubuntu n'est pas spécialement dans la liste de l'ordre du BOOT.
Je vois en 1er : UEFI MATSHITA DVD...
en 2ème : Removable Device
en 3ème : LAN
en 4ème : Windows Boot Manager
4- efibootmgr -v m'a donné comme message qu'il n'était pas installé. Je l'ai donc installé avec apt-get install.
Après quoi efibootmgr -v ne me répond plus rien.
Hors ligne
#6 Le 28/05/2015, à 19:09
- Scr7zon
Re : [Résolu] Le bootage sur le disque ne se fait pas
Fast boot est une option au meme titre que secure boot dans la rubrique securité .
Avez-vous des option pour activez uefi , csm ? Si oui activez uefi .
Vous avez toujours windows boot manager malgré la suppression de windows .
Lancez efibootmgr a partir du live (essayer ubnutu) , il doit etre installé de base , comme le bureau .
Ce n'est pas un signe de bonne santé mentale d'être bien adapté à une société malade.
Hors ligne
#7 Le 28/05/2015, à 20:09
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Re bonsoir,
Effectivement, j'ai trouvé Fast Boot dans la partie où je définis l'ordre du Bios.
Il est désactivé désormais. Il y a dans cette page une option Launch CSM mise à "never" l'autre possibilité serait "always". Je pense que cela désactive CSM
Sur un autre partie du Bios, le Secure Boot est désactivé.
Je pense que tout cela est correct?
L'ordre du boot est maintenant le suivant :
1er : Removable devices
2ème : CD/DVD
3ème :LAN
4me : Windows manager
Par contre je ne trouve pas efibootmgr si je ne le charge pas avec la commande sudo apt-get install efibootmgr
Je viens de le charger dans un terminal.
J'ai refait la manip indiquée au départ. Je tombe de nouveau sur Unity tout beau et maintenant j'ai bien efibootmgr dans les applications et si je le lance, je suis dirigé vers un site Yahoo! finance (?!) avec des liens vers par exemple "Bootmgr problem ? get help" plus deux autres...
Bonne soirée
Dernière modification par ycod48 (Le 28/05/2015, à 20:44)
Hors ligne
#8 Le 28/05/2015, à 21:35
- Scr7zon
Re : [Résolu] Le bootage sur le disque ne se fait pas
C'est bon ou pas !?
Ce n'est pas un signe de bonne santé mentale d'être bien adapté à une société malade.
Hors ligne
#9 Le 28/05/2015, à 21:47
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Bonsoir,
Pas vraiment : si je redémarre et que j'attends, même message toujours,
Si je vais dans le Bios menu avec F12 et que je choisis USB... je reviens en LiveUSB ...
Hors ligne
#10 Le 28/05/2015, à 22:44
- Scr7zon
Re : [Résolu] Le bootage sur le disque ne se fait pas
C'est bien embêtant que vous ne pussiez pas accéder a efibootmgr , ce n'est pas une application ( Tout se passe en ligne de commande ),
Il n’était pas nécessaire de supprimer windows 8 , on peut faire cohabiter les deux .
Il affichera toujours le même message car l’ordre de démarrage n'a pas changé ,
Il faut arriver a accéder a efibootmgr , relancer le boot-repair en laissant les option par défaut .
Avez créer une partition efi lors de votre installation sur votre pc (contenant un "bios" UEFI) ???
Ce n'est pas un signe de bonne santé mentale d'être bien adapté à une société malade.
Hors ligne
#11 Le 29/05/2015, à 06:42
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Bonjour,
Il y a une partition efi au départ. Ce n'est pas moi qui l'ai créée. Gparted donne :
/dev/sda1 fat32 /boot/efi 512Mio ... boot
/dev/sda2 ext4 / 927.58 Gio ....
/dev/sda3 linux-swap 3.43 Gio ...
Il faut toujours rebooter quand j'éteins. et je reviens en live USB ...
dernier diagnostic :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 9626272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,946,320,895 1,945,270,272 Data partition (Linux)
/dev/sda3 1,946,320,896 1,953,523,711 7,202,816 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.0 GB, 31009800192 bytes
86 heads, 22 sectors/track, 32011 cylinders, total 60566016 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 60,566,015 60,557,952 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 5221-465F vfat
/dev/sda2 34586662-d5cc-486b-a81a-043866c2b525 ext4
/dev/sda3 2cb06848-e42d-459c-ae33-a3bbacdb31f8 swap
/dev/sdb1 F599-F2EE vfat USB DISK
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 29 04:10 ata-MATSHITA_DVD-RAM_SW830_KO0160700432 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 29 04:15 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304 -> ../../sda
lrwxrwxrwx 1 root root 10 May 29 04:10 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 29 04:10 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 29 04:10 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5694304-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 May 29 04:14 usb-_USB_DISK_2.0_070B52A168154046-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 29 04:10 usb-_USB_DISK_2.0_070B52A168154046-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 May 29 04:15 wwn-0x50014ee25e53a2af -> ../../sda
lrwxrwxrwx 1 root root 10 May 29 04:10 wwn-0x50014ee25e53a2af-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 29 04:10 wwn-0x50014ee25e53a2af-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 29 04:10 wwn-0x50014ee25e53a2af-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
linux /boot/vmlinuz-3.16.0-38-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-38-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
menuentry 'Ubuntu, with Linux 3.16.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-38-generic ...'
linux /boot/vmlinuz-3.16.0-38-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-recovery-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-38-generic ...'
linux /boot/vmlinuz-3.16.0-38-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-38-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-30-generic ...'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.16.0-30-generic ...'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-53-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-53-generic-advanced-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.13.0-53-generic ...'
linux /boot/vmlinuz-3.13.0-53-generic.efi.signed root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-53-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-53-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-53-generic-recovery-34586662-d5cc-486b-a81a-043866c2b525' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 34586662-d5cc-486b-a81a-043866c2b525
else
search --no-floppy --fs-uuid --set=root 34586662-d5cc-486b-a81a-043866c2b525
fi
echo 'Loading Linux 3.13.0-53-generic ...'
linux /boot/vmlinuz-3.13.0-53-generic.efi.signed root=UUID=34586662-d5cc-486b-a81a-043866c2b525 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-53-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 5221-465F
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=34586662-d5cc-486b-a81a-043866c2b525 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=5221-465F /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=2cb06848-e42d-459c-ae33-a3bbacdb31f8 none swap sw 0 0
UUID=5221-465F /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4679/mounts) leaked on lvs invocation. Parent PID 12879: bash
File descriptor 63 (pipe:[46525]) leaked on lvs invocation. Parent PID 12879: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-05-29__04h14 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="5221-465F" TYPE="vfat"
/dev/sda2: UUID="34586662-d5cc-486b-a81a-043866c2b525" TYPE="ext4"
/dev/sda3: UUID="2cb06848-e42d-459c-ae33-a3bbacdb31f8" TYPE="swap"
/dev/sdb1: LABEL="USB DISK" UUID="F599-F2EE" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 29 04:04 grub.d
drwxr-xr-x 2 root root 4096 May 28 14:40 grub.d.bak
total 76
-rwxr-xr-x 1 root root 9424 May 13 18:33 00_header
-rwxr-xr-x 1 root root 6058 May 13 14:51 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 13 18:33 10_linux
-rwxr-xr-x 1 root root 10412 May 13 18:33 20_linux_xen
-rwxr-xr-x 1 root root 170 May 29 04:04 25_custom
-rwxr-xr-x 1 root root 11692 May 13 18:33 30_os-prober
-rwxr-xr-x 1 root root 1416 May 13 18:33 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 13 18:33 40_custom
-rwxr-xr-x 1 root root 216 May 13 18:33 41_custom
-rw-r--r-- 1 root root 483 May 13 18:33 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=5221-465F (sda1)
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0003,0001
Boot0001 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...0................
Boot0002* UEFI: USB DISK 2.0 PMAP ACPI(a0341d0,0)PCI(13,2)USB(2,0)HD(1,1f80,39c0a80,0002cb73)..BO
Boot0003 UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,923718dd-61b2-4228-9a94-7cb2e2b2d22d)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-22R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 997GB 996GB ext4
3 997GB 1000GB 3688MB linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 31.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 31.0GB 31.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-22R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:997GB:996GB:ext4::;
3:997GB:1000GB:3688MB:linux-swap(v1)::;
BYT;
/dev/sdb:31.0GB:scsi:512:512:msdos: USB DISK 2.0;
1:4129kB:31.0GB:31.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931.5G WDC WD10
sda1 part vfat 512M 5221-465F
sda2 part ext4 927.6G 34586662-d5cc-486b-a81a-043866c2b525
sda3 part swap 3.4G 2cb06848-e42d-459c-ae33-a3bbacdb31f8
sdb disk 28.9G USB DISK
sdb1 part vfat 28.9G USB DISK F599-F2EE
sr0 rom 1024M DVD-RAM
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 5f 46 21 52 4e 4f 20 4e 41 4d 45 20 20 |..)_F!RNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 79M 1.6G 5% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.2M 331M 1% /run
/dev/sdb1 vfat 29G 2.0G 27G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 1.1M 1.7G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 76K 1.7G 1% /run/shm
none tmpfs 100M 64K 100M 1% /run/user
/dev/sda1 vfat 511M 7.3M 504M 2% /mnt/boot-sav/sda1
/dev/sda2 ext4 913G 6.5G 861G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x77dffce6
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 31.0 GB, 31009800192 bytes
86 heads, 22 sectors/track, 32011 cylinders, total 60566016 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002cb73
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 60566015 30278976 c W95 FAT32 (LBA)
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
rm /mnt/boot-sav/sda1/efi/Microsoft/Boot/bootmgfw.efi /mnt/boot-sav/sda1/efi/Microsoft/Boot/bootmgfw.efi.grb
rm /mnt/boot-sav/sda1/efi/Microsoft/Boot/bootx64.efi /mnt/boot-sav/sda1/efi/Microsoft/Boot/bootx64.efi.grb
rm /mnt/boot-sav/sda1/efi/Boot/bootx64.efi /mnt/boot-sav/sda1/efi/Boot/bootx64.efi.grb
Mount sda1 on /mnt/boot-sav/sda2/boot/efi
ls sda1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/Boot
*******lspci -nnk | grep -iA3 vga
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8240] [1002:9838]
Subsystem: Acer Incorporated [ALI] Device [1025:0800]
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:9840]
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1.2,grub-install (GRUB) 2.
chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0003,0001
Boot0001 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...0................
Boot0002* UEFI: USB DISK 2.0 PMAP ACPI(a0341d0,0)PCI(13,2)USB(2,0)HD(1,1f80,39c0a80,0002cb73)..BO
Boot0003 UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,923718dd-61b2-4228-9a94-7cb2e2b2d22d)..BO
chroot /mnt/boot-sav/sda2 uname -r
Kernel: 3.16.0-30-generic
Reinstall the grub-efi-amd64-signed of sda2
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
mv 25_custom
ls sda1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/Boot
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (& .grb)
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Boot/bootx64.efi (& .grb)
ls sda1/efi: /Microsoft/Boot/bootx64.efi.grb /Microsoft/Boot/bootx64.efi /Microsoft/Boot/bootmgfw.efi.grb /Microsoft/Boot/bootmgfw.efi /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/Boot /Boot/bootx64.efi.grb /Boot/bootx64.efi
Add /mnt/boot-sav/sda2/boot/efi efi entries in /mnt/boot-sav/sda2/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/MokManager.efi
chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0000,0002,0003,0001
Boot0000* ubuntu HD(1,800,100000,923718dd-61b2-4228-9a94-7cb2e2b2d22d)File(EFIubuntushimx64.efi)
Boot0001 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...0................
Boot0002* UEFI: USB DISK 2.0 PMAP ACPI(a0341d0,0)PCI(13,2)USB(2,0)HD(1,1f80,39c0a80,0002cb73)..BO
Boot0003 UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,923718dd-61b2-4228-9a94-7cb2e2b2d22d)..BO
chroot /mnt/boot-sav/sda2 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.16.0-38-generic
Found initrd image: /boot/initrd.img-3.16.0-38-generic
Found linux image: /boot/vmlinuz-3.16.0-30-generic
Found initrd image: /boot/initrd.img-3.16.0-30-generic
Found linux image: /boot/vmlinuz-3.13.0-53-generic
Found initrd image: /boot/initrd.img-3.13.0-53-generic
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
Download as text
Hors ligne
#12 Le 29/05/2015, à 09:11
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Re bonjour
Voilà, j'ai recommencé la manip indiquée et j'ai de nouveau Unity devant moi.
En ouvrant à ce stade un terminal et en tapant efibootmgr -v je n'ai rien.
par contre si je tape sudo efibootmgr - v, voici ce que j'ai :
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0001
Boot0000* ubuntu HD(1,800,100000,923718dd-61b2-4228-9a94-7cb2e2b2d22d)File(\EFI\ubuntu\shimx64.efi)
Boot0001 Windows Boot Manager HD(2,c8800,96000,0002cb73-0000-0000-0000-000000000000)File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...0................
Seulement, je n'ai pas encore éteint mon ordi et je prévois qu'après le prochain arrêt, tout sera à recommencer !!
Si quelqu'un a la solution, je suis preneur...
Merci d'avance
Dernière modification par ycod48 (Le 29/05/2015, à 09:12)
Hors ligne
#13 Le 29/05/2015, à 19:11
- ycod48
Re : [Résolu] Le bootage sur le disque ne se fait pas
Bon, eh bien pour d'autres débutants avec les joies de l'EFI, voici ce que j'ai fini par faire :
( ceci n'est valable que dans le cas où on veut supprimer Windows du disque dur )
1- Mettre le Bios en mode classique ( Legacy ) et non pas UEFI
2- Au cours de l'installation d'Ubuntu, ne pas avoir peur de partitionner en écrasant Windows.
Il faut une partition ext4 à la racine / et une partition swap
A la fin cela marche !
Hors ligne