Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 05/06/2015, à 19:16

olivi4

Problème sauvegarde /home [Résolu]

Bonjour,

Ayant effectué plein de tests sur ma machine, j'aimerais faire une installation propre.
N'ayant pas créé de partition /home séparée, je tente de copier tout le contenu de home vers un disque dur externe formaté en NTFS. J'ai affiché les dossiers/fichiers cachés, mais lors de la copie j'ai un message qui s'affiche et qui dit:

Impossible de traiter le dossier dconf car vous n'avez pas la permission de le lire

Pourriez-vous m'aider à résoudre ce problème ?

Merci,

Olivier

Dernière modification par olivi4 (Le 06/07/2015, à 11:34)

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#2 Le 05/06/2015, à 19:18

SilentStorm

Re : Problème sauvegarde /home [Résolu]

sudo cp -rf /home /media/partition-ntfs-de-destination

Core I7 a 2.4 GHz / 16 Go de ram / SSD 512 Go + HDD 1 To (1.5 To) / GeForce 650m GT (pc portable)
OS : Linux Mint 17.1 (Cinnamon) - Debian 8 Jessie (Mate) - ArchLinux (Xfce)

Hors ligne

#3 Le 05/06/2015, à 21:04

maxire

Re : Problème sauvegarde /home [Résolu]

Salut,

Olivi4 a écrit :

disque dur externe formaté en NTFS

Très mauvaise idée, tu vas perdre tous les  propriétaires/groupes et autorisations d'accès de tous les répertoires et fichiers de /home, et je ne parle pas des liens symboliques et physiques.

Tu ferais mieux de formater le disque en ext4 et utiliser rsync comme ceci:

En montant le disque externe  sous /mnt:

sudo rsync -av /home /mnt

En principe rsync doit être installé sous Ubuntu, si il ne l'est pas tu installes son paquet.

Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail

Hors ligne

#4 Le 06/06/2015, à 08:14

olivi4

Re : Problème sauvegarde /home [Résolu]

Merci,

Je vais donc commander un nouveau Disque dur externe que je formaterai en ext4. Je reviendrai vous tenir au courant

Bon week-end à vous !

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#5 Le 30/06/2015, à 16:35

olivi4

Re : Problème sauvegarde /home [Résolu]

Bonjour,

N'ayant pas retrouvé cette discussion (je sais, je n'ai pas assez cherché et me suis surtout focalisé sur un formatage du DD externe en ext4), j'ai tenté une sauvegarde en me basant sur cette page de la documentation.

J'ai donc effectué la commande suivante 

sudo cp -apv/home /media/sauvegarde_usb

/media/sauvegarde_usb étant le nom de mon disque dur externe formaté en ext4.

Apparemment cela s'est bien déroulé puisque j'y ai retrouvé tous mes dossiers, fichiers et fichiers cachés.

Mais impossible de coller cette sauvegarde dans /home via l'interface graphique. Je me suis dit qu'il fallait juste inverser la commande et j'ai donc lancé 

sudo cp -apv /media/olivier/sauvegarde_usb /home

je ne me rappelle plus si j'ai mis un / après /home.

Toujours est-il qu'au lieu de me copier dans home, il m'a créé un dossier "sauvegarde_usb" auquel je n'ai pas les droits d'accès.

J'ai donc supprimé ce dossier en lançant nautilus en mode root.

Si je tente un copié coller du dossier home de ma sauvegarde, j'ai à nouveau le même message d'erreur que celui cité dans mon premier post.

Quelqu'un pourrait-il me donner la commande exacte pour recopier le /home sauvegardé vers celui de ma nouvelle install. (même login et même mot de passe)

Merci d'avance,

Olivier

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#6 Le 30/06/2015, à 16:38

Compte supprimé

Re : Problème sauvegarde /home [Résolu]

Ah ! là tu cumules, mais c'est pas grave smile

Ce que tu as effacé se trouve dans les fichiers de root et tu ne peux pas vider cette corbeille, on le fera à la main à la fin de l'opération; sauf si tu manques de place.

Pour la restauration de ton /home, tu as oublié de compléter le chemin par le nom de ton compte : /home/ton_compte et cela dans la source comme dans la destination.

Dernière modification par Compte supprimé (Le 30/06/2015, à 16:45)

#7 Le 30/06/2015, à 16:50

pires57

Re : Problème sauvegarde /home [Résolu]

Je plussoie l'utilisation de rsync.
cp c'est bien pour de petit fichier mais quand tu as de plus grosses masse de données c'est utile d'avoir un aperçu de l'avancement.
tes données sont situés dans /home/$USER, c'est ce $USER que tu doit transférer.

Utilisateur d'Archlinux, Ubuntu et Kali Linux
Administrateur système et réseau spécialisé Linux.
LinkedIn

Hors ligne

#8 Le 30/06/2015, à 17:28

olivi4

Re : Problème sauvegarde /home [Résolu]

Tamarou a écrit :

Ah ! là tu cumules, mais c'est pas grave smile

Ce que tu as effacé se trouve dans les fichiers de root et tu ne peux pas vider cette corbeille, on le fera à la main à la fin de l'opération; sauf si tu manques de place.

Pour la restauration de ton /home, tu as oublié de compléter le chemin par le nom de ton compte : /home/ton_compte et cela dans la source comme dans la destination.

En fait, dans ma sauvegarde il y a 3 dossiers dans home :
-hts
-mythtv
-olivier

Est-ce que la commande suivante serait la bonne : 

cp -apv /media/olivier/sauvegarde_usb/home/olivier /home/olivier

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#9 Le 30/06/2015, à 17:35

maxire

Re : Problème sauvegarde /home [Résolu]

Faire simple:

cd /media/olivier/sauvegarde_usb/home
sudo cp -apv * /home

et ru récupères les 3 répertoires sinon tu remplaces * par olivier

Dernière modification par maxire (Le 30/06/2015, à 17:37)

Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail

Hors ligne

#10 Le 01/07/2015, à 09:11

olivi4

Re : Problème sauvegarde /home [Résolu]

Bonjour,

Alors voilà, c'est fait.

Mais:

Dans "journaux systèmes" j'ai ce message d'erreur:

/var/log/mail.log: Erreur lors de l'obtention des informations du fichier "/var/log/mail.log: Aucun fichier ou dossier de ce type.

Les messages détaillés :

[    14.860] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    14.860] X Protocol Version 11, Revision 0
[    14.860] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    14.860] Current Operating System: Linux olivier-desktop 3.16.0-41-generic #57~14.04.1-Ubuntu SMP Thu Jun 18 18:01:13 UTC 2015 x86_64
[    14.860] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-41-generic root=UUID=7a42e9c4-b360-4c18-bd19-4ef48177f17b ro quiet splash vt.handoff=7
[    14.860] Build Date: 12 February 2015  11:11:26PM
[    14.860] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[    14.860] Current version of pixman: 0.30.2
[    14.860] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.860] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.860] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 30 16:37:20 2015
[    14.910] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.053] (==) No Layout section.  Using the first Screen section.
[    15.053] (==) No screen section available. Using defaults.
[    15.053] (**) |-->Screen "Default Screen Section" (0)
[    15.053] (**) |   |-->Monitor "<default monitor>"
[    15.055] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.055] (==) Automatically adding devices
[    15.055] (==) Automatically enabling devices
[    15.055] (==) Automatically adding GPU devices
[    15.111] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.111] 	Entry deleted from font path.
[    15.111] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.111] 	Entry deleted from font path.
[    15.111] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.111] 	Entry deleted from font path.
[    15.112] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.112] 	Entry deleted from font path.
[    15.112] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.112] 	Entry deleted from font path.
[    15.112] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    15.112] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    15.112] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.112] (II) Loader magic: 0x7fc25a898c80
[    15.112] (II) Module ABI versions:
[    15.112] 	X.Org ANSI C Emulation: 0.4
[    15.112] 	X.Org Video Driver: 18.0
[    15.112] 	X.Org XInput driver : 21.0
[    15.112] 	X.Org Server Extension : 8.0
[    15.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.113] (--) PCI:*(0:6:0:0) 1002:68f9:174b:e164 rev 0, Mem @ 0xd0000000/268435456, 0xfe520000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[    15.126] (II) LoadModule: "glx"
[    15.169] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.282] (II) Module glx: vendor="X.Org Foundation"
[    15.282] 	compiled for 1.16.0, module version = 1.0.0
[    15.282] 	ABI class: X.Org Server Extension, version 8.0
[    15.282] (==) AIGLX enabled
[    15.282] (==) Matched fglrx as autoconfigured driver 0
[    15.282] (==) Matched ati as autoconfigured driver 1
[    15.282] (==) Matched fglrx as autoconfigured driver 2
[    15.282] (==) Matched ati as autoconfigured driver 3
[    15.282] (==) Matched modesetting as autoconfigured driver 4
[    15.282] (==) Matched fbdev as autoconfigured driver 5
[    15.282] (==) Matched vesa as autoconfigured driver 6
[    15.282] (==) Assigned the driver to the xf86ConfigLayout
[    15.282] (II) LoadModule: "fglrx"
[    15.282] (WW) Warning, couldn't open module fglrx
[    15.282] (II) UnloadModule: "fglrx"
[    15.282] (II) Unloading fglrx
[    15.282] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    15.282] (II) LoadModule: "ati"
[    15.283] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    15.291] (II) Module ati: vendor="X.Org Foundation"
[    15.291] 	compiled for 1.16.0, module version = 7.4.0
[    15.291] 	Module class: X.Org Video Driver
[    15.291] 	ABI class: X.Org Video Driver, version 18.0
[    15.291] (II) LoadModule: "radeon"
[    15.292] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    15.311] (II) Module radeon: vendor="X.Org Foundation"
[    15.311] 	compiled for 1.16.0, module version = 7.4.0
[    15.311] 	Module class: X.Org Video Driver
[    15.311] 	ABI class: X.Org Video Driver, version 18.0
[    15.311] (II) LoadModule: "modesetting"
[    15.311] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.317] (II) Module modesetting: vendor="X.Org Foundation"
[    15.317] 	compiled for 1.16.0, module version = 0.9.0
[    15.317] 	Module class: X.Org Video Driver
[    15.317] 	ABI class: X.Org Video Driver, version 18.0
[    15.317] (II) LoadModule: "fbdev"
[    15.317] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.318] (II) Module fbdev: vendor="X.Org Foundation"
[    15.318] 	compiled for 1.16.0, module version = 0.4.4
[    15.318] 	Module class: X.Org Video Driver
[    15.318] 	ABI class: X.Org Video Driver, version 18.0
[    15.318] (II) LoadModule: "vesa"
[    15.318] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.318] (II) Module vesa: vendor="X.Org Foundation"
[    15.318] 	compiled for 1.16.0, module version = 2.3.3
[    15.318] 	Module class: X.Org Video Driver
[    15.318] 	ABI class: X.Org Video Driver, version 18.0
[    15.318] (==) Matched fglrx as autoconfigured driver 0
[    15.318] (==) Matched ati as autoconfigured driver 1
[    15.318] (==) Matched fglrx as autoconfigured driver 2
[    15.318] (==) Matched ati as autoconfigured driver 3
[    15.318] (==) Matched modesetting as autoconfigured driver 4
[    15.318] (==) Matched fbdev as autoconfigured driver 5
[    15.318] (==) Matched vesa as autoconfigured driver 6
[    15.318] (==) Assigned the driver to the xf86ConfigLayout
[    15.318] (II) LoadModule: "fglrx"
[    15.319] (WW) Warning, couldn't open module fglrx
[    15.319] (II) UnloadModule: "fglrx"
[    15.319] (II) Unloading fglrx
[    15.319] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    15.319] (II) LoadModule: "ati"
[    15.319] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    15.319] (II) Module ati: vendor="X.Org Foundation"
[    15.319] 	compiled for 1.16.0, module version = 7.4.0
[    15.319] 	Module class: X.Org Video Driver
[    15.319] 	ABI class: X.Org Video Driver, version 18.0
[    15.319] (II) LoadModule: "modesetting"
[    15.319] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.319] (II) Module modesetting: vendor="X.Org Foundation"
[    15.319] 	compiled for 1.16.0, module version = 0.9.0
[    15.319] 	Module class: X.Org Video Driver
[    15.319] 	ABI class: X.Org Video Driver, version 18.0
[    15.319] (II) UnloadModule: "modesetting"
[    15.319] (II) Unloading modesetting
[    15.319] (II) Failed to load module "modesetting" (already loaded, 0)
[    15.319] (II) LoadModule: "fbdev"
[    15.319] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.319] (II) Module fbdev: vendor="X.Org Foundation"
[    15.319] 	compiled for 1.16.0, module version = 0.4.4
[    15.319] 	Module class: X.Org Video Driver
[    15.319] 	ABI class: X.Org Video Driver, version 18.0
[    15.319] (II) UnloadModule: "fbdev"
[    15.319] (II) Unloading fbdev
[    15.319] (II) Failed to load module "fbdev" (already loaded, 0)
[    15.319] (II) LoadModule: "vesa"
[    15.320] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.320] (II) Module vesa: vendor="X.Org Foundation"
[    15.320] 	compiled for 1.16.0, module version = 2.3.3
[    15.320] 	Module class: X.Org Video Driver
[    15.320] 	ABI class: X.Org Video Driver, version 18.0
[    15.320] (II) UnloadModule: "vesa"
[    15.320] (II) Unloading vesa
[    15.320] (II) Failed to load module "vesa" (already loaded, 0)
[    15.320] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
	HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
	HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[    15.326] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.326] (II) FBDEV: driver for framebuffer: fbdev
[    15.326] (II) VESA: driver for VESA chipsets: vesa
[    15.326] (++) using VT number 7

[    15.326] (II) [KMS] Kernel modesetting enabled.
[    15.326] (WW) Falling back to old probe method for modesetting
[    15.326] (WW) Falling back to old probe method for fbdev
[    15.326] (II) Loading sub module "fbdevhw"
[    15.326] (II) LoadModule: "fbdevhw"
[    15.327] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    15.332] (II) Module fbdevhw: vendor="X.Org Foundation"
[    15.332] 	compiled for 1.16.0, module version = 0.0.2
[    15.332] 	ABI class: X.Org Video Driver, version 18.0
[    15.332] (WW) Falling back to old probe method for vesa
[    15.332] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    15.332] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    15.332] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    15.332] (==) RADEON(0): Default visual is TrueColor
[    15.332] (==) RADEON(0): RGB weight 888
[    15.332] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    15.332] (--) RADEON(0): Chipset: "ATI Radeon HD 5450" (ChipID = 0x68f9)
[    15.332] (II) Loading sub module "dri2"
[    15.332] (II) LoadModule: "dri2"
[    15.332] (II) Module "dri2" already built-in
[    15.332] (II) Loading sub module "exa"
[    15.332] (II) LoadModule: "exa"
[    15.332] (II) Loading /usr/lib/xorg/modules/libexa.so
[    15.333] (II) Module exa: vendor="X.Org Foundation"
[    15.333] 	compiled for 1.16.0, module version = 2.6.0
[    15.333] 	ABI class: X.Org Video Driver, version 18.0
[    15.333] (II) RADEON(0): KMS Color Tiling: enabled
[    15.333] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    15.333] (II) RADEON(0): KMS Pageflipping: enabled
[    15.333] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    15.336] (II) RADEON(0): Output HDMI-0 has no monitor section
[    15.339] (II) RADEON(0): Output DVI-0 has no monitor section
[    15.372] (II) RADEON(0): Output VGA-0 has no monitor section
[    15.375] (II) RADEON(0): EDID for output HDMI-0
[    15.378] (II) RADEON(0): EDID for output DVI-0
[    15.411] (II) RADEON(0): EDID for output VGA-0
[    15.411] (II) RADEON(0): Manufacturer: HSP  Model: 13  Serial#: 2896
[    15.411] (II) RADEON(0): Year: 2008  Week: 44
[    15.411] (II) RADEON(0): EDID Version: 1.3
[    15.411] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    15.411] (II) RADEON(0): Sync:  Separate
[    15.411] (II) RADEON(0): Max Image Size [cm]: horiz.: 39  vert.: 32
[    15.411] (II) RADEON(0): Gamma: 2.20
[    15.411] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[    15.411] (II) RADEON(0): First detailed timing is preferred mode
[    15.411] (II) RADEON(0): redX: 0.640 redY: 0.336   greenX: 0.303 greenY: 0.620
[    15.411] (II) RADEON(0): blueX: 0.140 blueY: 0.073   whiteX: 0.313 whiteY: 0.329
[    15.411] (II) RADEON(0): Supported established timings:
[    15.411] (II) RADEON(0): 640x480@60Hz
[    15.411] (II) RADEON(0): 800x600@60Hz
[    15.411] (II) RADEON(0): 1024x768@60Hz
[    15.411] (II) RADEON(0): Manufacturer's mask: 0
[    15.411] (II) RADEON(0): Supported standard timings:
[    15.411] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.411] (II) RADEON(0): Supported detailed timing:
[    15.411] (II) RADEON(0): clock: 108.0 MHz   Image Size:  396 x 324 mm
[    15.411] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    15.411] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    15.411] (II) RADEON(0): Serial No: 2896
[    15.411] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    15.411] (II) RADEON(0): Monitor name: T191H
[    15.411] (II) RADEON(0): EDID (in hex):
[    15.411] (II) RADEON(0): 	00ffffffffffff0022701300500b0000
[    15.411] (II) RADEON(0): 	2c120103082720782acbf5a3564d9e23
[    15.411] (II) RADEON(0): 	12505421080081800101010101010101
[    15.412] (II) RADEON(0): 	010101010101302a009851002a403070
[    15.412] (II) RADEON(0): 	13008c441100001e000000ff00323839
[    15.412] (II) RADEON(0): 	360a2020202020202020000000fd003b
[    15.412] (II) RADEON(0): 	3d1f400b000a202020202020000000fc
[    15.412] (II) RADEON(0): 	0054313931480a202020202020200017
[    15.412] (II) RADEON(0): Printing probed modes for output VGA-0
[    15.412] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    15.412] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.412] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.412] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.412] (II) RADEON(0): Output HDMI-0 disconnected
[    15.412] (II) RADEON(0): Output DVI-0 disconnected
[    15.412] (II) RADEON(0): Output VGA-0 connected
[    15.412] (II) RADEON(0): Using exact sizes for initial modes
[    15.412] (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
[    15.412] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    15.412] (II) RADEON(0): mem size init: gart size :3fdee000 vram size: s:20000000 visible:1fac0000
[    15.412] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    15.412] (==) RADEON(0): DPI set to (96, 96)
[    15.412] (II) Loading sub module "fb"
[    15.412] (II) LoadModule: "fb"
[    15.412] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.419] (II) Module fb: vendor="X.Org Foundation"
[    15.419] 	compiled for 1.16.0, module version = 1.0.0
[    15.419] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.419] (II) Loading sub module "ramdac"
[    15.419] (II) LoadModule: "ramdac"
[    15.419] (II) Module "ramdac" already built-in
[    15.419] (II) UnloadModule: "modesetting"
[    15.419] (II) Unloading modesetting
[    15.419] (II) UnloadModule: "fbdev"
[    15.419] (II) Unloading fbdev
[    15.419] (II) UnloadSubModule: "fbdevhw"
[    15.419] (II) Unloading fbdevhw
[    15.419] (II) UnloadModule: "vesa"
[    15.419] (II) Unloading vesa
[    15.419] (--) Depth 24 pixmap format is 32 bpp
[    15.420] (II) RADEON(0): [DRI2] Setup complete
[    15.420] (II) RADEON(0): [DRI2]   DRI driver: r600
[    15.420] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    15.420] (II) RADEON(0): Front buffer size: 5120K
[    15.420] (II) RADEON(0): VRAM usage limit set to 462355K
[    15.430] (==) RADEON(0): Backing store enabled
[    15.431] (II) RADEON(0): Direct rendering enabled
[    15.431] (II) EXA(0): Driver allocated offscreen pixmaps
[    15.431] (II) EXA(0): Driver registered support for the following operations:
[    15.431] (II)         Solid
[    15.431] (II)         Copy
[    15.431] (II)         Composite (RENDER acceleration)
[    15.431] (II)         UploadToScreen
[    15.431] (II)         DownloadFromScreen
[    15.431] (II) RADEON(0): Acceleration enabled
[    15.431] (==) RADEON(0): DPMS enabled
[    15.431] (==) RADEON(0): Silken mouse enabled
[    15.431] (II) RADEON(0): Set up textured video
[    15.431] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    15.431] (II) RADEON(0): [XvMC] Extension initialized.
[    15.431] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.432] (--) RandR disabled
[    15.977] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    15.977] (II) AIGLX: enabled GLX_ARB_create_context
[    15.977] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    15.977] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    15.977] (II) AIGLX: enabled GLX_INTEL_swap_event
[    15.977] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    15.977] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    15.977] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    15.977] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    15.978] (II) AIGLX: Loaded and initialized r600
[    15.978] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.013] (II) RADEON(0): Setting screen physical size to 338 x 270
[    16.075] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.082] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.082] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.082] (II) LoadModule: "evdev"
[    16.082] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.100] (II) Module evdev: vendor="X.Org Foundation"
[    16.100] 	compiled for 1.16.0, module version = 2.9.0
[    16.100] 	Module class: X.Org XInput Driver
[    16.100] 	ABI class: X.Org XInput driver, version 21.0
[    16.100] (II) Using input driver 'evdev' for 'Power Button'
[    16.100] (**) Power Button: always reports core events
[    16.100] (**) evdev: Power Button: Device: "/dev/input/event1"
[    16.100] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.100] (--) evdev: Power Button: Found keys
[    16.100] (II) evdev: Power Button: Configuring as keyboard
[    16.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.100] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.100] (**) Option "xkb_rules" "evdev"
[    16.100] (**) Option "xkb_model" "pc105"
[    16.100] (**) Option "xkb_layout" "fr"
[    16.100] (**) Option "xkb_variant" "oss"
[    16.103] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    16.115] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.115] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.115] (II) Using input driver 'evdev' for 'Power Button'
[    16.115] (**) Power Button: always reports core events
[    16.115] (**) evdev: Power Button: Device: "/dev/input/event0"
[    16.115] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.115] (--) evdev: Power Button: Found keys
[    16.115] (II) evdev: Power Button: Configuring as keyboard
[    16.115] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    16.115] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.115] (**) Option "xkb_rules" "evdev"
[    16.115] (**) Option "xkb_model" "pc105"
[    16.115] (**) Option "xkb_layout" "fr"
[    16.115] (**) Option "xkb_variant" "oss"
[    16.115] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/event3)
[    16.116] (**) PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[    16.116] (II) Using input driver 'evdev' for 'PS/2+USB Mouse'
[    16.116] (**) PS/2+USB Mouse: always reports core events
[    16.116] (**) evdev: PS/2+USB Mouse: Device: "/dev/input/event3"
[    16.116] (--) evdev: PS/2+USB Mouse: Vendor 0x1267 Product 0x210
[    16.116] (--) evdev: PS/2+USB Mouse: Found 3 mouse buttons
[    16.116] (--) evdev: PS/2+USB Mouse: Found scroll wheel(s)
[    16.116] (--) evdev: PS/2+USB Mouse: Found relative axes
[    16.116] (--) evdev: PS/2+USB Mouse: Found x and y relative axes
[    16.116] (II) evdev: PS/2+USB Mouse: Configuring as mouse
[    16.116] (II) evdev: PS/2+USB Mouse: Adding scrollwheel support
[    16.116] (**) evdev: PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[    16.116] (**) evdev: PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.116] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12/12-1/12-1:1.0/0003:1267:0210.0001/input/input6/event3"
[    16.116] (II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE, id 8)
[    16.116] (II) evdev: PS/2+USB Mouse: initialized for relative axes.
[    16.116] (**) PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[    16.116] (**) PS/2+USB Mouse: (accel) acceleration profile 0
[    16.116] (**) PS/2+USB Mouse: (accel) acceleration factor: 2.000
[    16.116] (**) PS/2+USB Mouse: (accel) acceleration threshold: 4
[    16.116] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/mouse0)
[    16.116] (II) No input driver specified, ignoring this device.
[    16.116] (II) This device may have been added with another device file.
[    16.116] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event4)
[    16.116] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[    16.117] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[    16.117] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[    16.117] (**) evdev: Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event4"
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Vendor 0x45e Product 0xdd
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found keys
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[    16.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12/12-2/12-2:1.0/0003:045E:00DD.0002/input/input7/event4"
[    16.117] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 9)
[    16.117] (**) Option "xkb_rules" "evdev"
[    16.117] (**) Option "xkb_model" "pc105"
[    16.117] (**) Option "xkb_layout" "fr"
[    16.117] (**) Option "xkb_variant" "oss"
[    16.117] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event5)
[    16.117] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[    16.117] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[    16.117] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[    16.117] (**) evdev: Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event5"
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Vendor 0x45e Product 0xdd
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found relative axes
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Forcing relative x/y axes to exist.
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found absolute axes
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Forcing absolute x/y axes to exist.
[    16.117] (--) evdev: Microsoft Comfort Curve Keyboard 2000: Found keys
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Configuring as mouse
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[    16.117] (II) evdev: Microsoft Comfort Curve Keyboard 2000: Adding scrollwheel support
[    16.117] (**) evdev: Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
[    16.117] (**) evdev: Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12/12-2/12-2:1.1/0003:045E:00DD.0003/input/input8/event5"
[    16.117] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 10)
[    16.117] (**) Option "xkb_rules" "evdev"
[    16.117] (**) Option "xkb_model" "pc105"
[    16.117] (**) Option "xkb_layout" "fr"
[    16.117] (**) Option "xkb_variant" "oss"
[    16.118] (II) evdev: Microsoft Comfort Curve Keyboard 2000: initialized for relative axes.
[    16.118] (WW) evdev: Microsoft Comfort Curve Keyboard 2000: ignoring absolute axes.
[    16.118] (**) Microsoft Comfort Curve Keyboard 2000: (accel) keeping acceleration scheme 1
[    16.118] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration profile 0
[    16.118] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration factor: 2.000
[    16.118] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration threshold: 4
[    16.118] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[    16.118] (II) No input driver specified, ignoring this device.
[    16.118] (II) This device may have been added with another device file.
[    16.118] (II) config/udev: Adding input device gspca_zc3xx (/dev/input/event15)
[    16.118] (**) gspca_zc3xx: Applying InputClass "evdev keyboard catchall"
[    16.118] (II) Using input driver 'evdev' for 'gspca_zc3xx'
[    16.118] (**) gspca_zc3xx: always reports core events
[    16.118] (**) evdev: gspca_zc3xx: Device: "/dev/input/event15"
[    16.118] (--) evdev: gspca_zc3xx: Vendor 0x46d Product 0x8d7
[    16.118] (--) evdev: gspca_zc3xx: Found keys
[    16.118] (II) evdev: gspca_zc3xx: Configuring as keyboard
[    16.118] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-4/input/input18/event15"
[    16.118] (II) XINPUT: Adding extended input device "gspca_zc3xx" (type: KEYBOARD, id 11)
[    16.118] (**) Option "xkb_rules" "evdev"
[    16.119] (**) Option "xkb_model" "pc105"
[    16.119] (**) Option "xkb_layout" "fr"
[    16.119] (**) Option "xkb_variant" "oss"
[    16.119] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
[    16.119] (II) No input driver specified, ignoring this device.
[    16.119] (II) This device may have been added with another device file.
[    16.119] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[    16.119] (II) No input driver specified, ignoring this device.
[    16.119] (II) This device may have been added with another device file.
[    16.119] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[    16.119] (II) No input driver specified, ignoring this device.
[    16.119] (II) This device may have been added with another device file.
[    16.120] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[    16.120] (II) No input driver specified, ignoring this device.
[    16.120] (II) This device may have been added with another device file.
[    16.120] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[    16.120] (II) No input driver specified, ignoring this device.
[    16.120] (II) This device may have been added with another device file.
[    16.120] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[    16.120] (II) No input driver specified, ignoring this device.
[    16.120] (II) This device may have been added with another device file.
[    16.120] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13)
[    16.120] (II) No input driver specified, ignoring this device.
[    16.120] (II) This device may have been added with another device file.
[    16.120] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[    16.121] (II) No input driver specified, ignoring this device.
[    16.121] (II) This device may have been added with another device file.
[    16.121] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[    16.121] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    16.121] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    16.121] (**) Eee PC WMI hotkeys: always reports core events
[    16.121] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event2"
[    16.121] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    16.121] (--) evdev: Eee PC WMI hotkeys: Found keys
[    16.121] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    16.121] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input5/event2"
[    16.121] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[    16.121] (**) Option "xkb_rules" "evdev"
[    16.121] (**) Option "xkb_model" "pc105"
[    16.121] (**) Option "xkb_layout" "fr"
[    16.121] (**) Option "xkb_variant" "oss"
[    20.092] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    20.092] (II) RADEON(0): Using EDID range info for horizontal sync
[    20.092] (II) RADEON(0): Using EDID range info for vertical refresh
[    20.092] (II) RADEON(0): Printing DDC gathered Modelines:
[    20.092] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    20.092] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.092] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.092] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.476] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    21.476] (II) RADEON(0): Using hsync ranges from config file
[    21.476] (II) RADEON(0): Using vrefresh ranges from config file
[    21.476] (II) RADEON(0): Printing DDC gathered Modelines:
[    21.476] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    21.476] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.476] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.476] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.891] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    29.891] (II) RADEON(0): Using hsync ranges from config file
[    29.891] (II) RADEON(0): Using vrefresh ranges from config file
[    29.891] (II) RADEON(0): Printing DDC gathered Modelines:
[    29.891] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    29.891] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.891] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    29.891] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.926] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    31.310] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    31.310] (II) RADEON(0): Using hsync ranges from config file
[    31.310] (II) RADEON(0): Using vrefresh ranges from config file
[    31.310] (II) RADEON(0): Printing DDC gathered Modelines:
[    31.310] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    31.310] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.310] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.310] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.358] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    31.358] (II) RADEON(0): Using hsync ranges from config file
[    31.358] (II) RADEON(0): Using vrefresh ranges from config file
[    31.358] (II) RADEON(0): Printing DDC gathered Modelines:
[    31.358] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    31.358] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.358] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.358] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.413] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[    31.589] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[    33.459] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    33.459] (II) RADEON(0): Using hsync ranges from config file
[    33.459] (II) RADEON(0): Using vrefresh ranges from config file
[    33.459] (II) RADEON(0): Printing DDC gathered Modelines:
[    33.459] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    33.459] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    33.459] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    33.459] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    35.807] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    35.807] (II) RADEON(0): Using hsync ranges from config file
[    35.807] (II) RADEON(0): Using vrefresh ranges from config file
[    35.807] (II) RADEON(0): Printing DDC gathered Modelines:
[    35.807] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    35.807] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    35.807] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    35.807] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    38.316] (II) XKB: reuse xkmfile /var/lib/xkb/server-1580E94F9C282AE2A0B7C28D11147BD2670E600F.xkm
[    49.985] (II) RADEON(0): EDID vendor "HSP", prod id 19
[    49.985] (II) RADEON(0): Using hsync ranges from config file
[    49.985] (II) RADEON(0): Using vrefresh ranges from config file
[    49.985] (II) RADEON(0): Printing DDC gathered Modelines:
[    49.985] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    49.985] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.985] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.985] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  3088.917] (II) RADEON(0): EDID vendor "HSP", prod id 19
[  3088.917] (II) RADEON(0): Using hsync ranges from config file
[  3088.917] (II) RADEON(0): Using vrefresh ranges from config file
[  3088.917] (II) RADEON(0): Printing DDC gathered Modelines:
[  3088.917] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  3088.917] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  3088.917] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  3088.917] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16295.668] (WW) RADEON(0): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 977108 < target_msc 977109
[ 56395.370] (II) RADEON(0): EDID vendor "HSP", prod id 19
[ 56395.370] (II) RADEON(0): Using hsync ranges from config file
[ 56395.370] (II) RADEON(0): Using vrefresh ranges from config file
[ 56395.370] (II) RADEON(0): Printing DDC gathered Modelines:
[ 56395.370] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 56395.370] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 56395.370] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 56395.370] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

D'autre part, j'avais réinstallé "synaptic" avant de faire ma restauration, mais impossible de le lancer. Il me demande de m'authentifier, mais rien ne se passe...

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#11 Le 01/07/2015, à 10:40

maxire

Re : Problème sauvegarde /home [Résolu]

Journaux systèmes ===> Outil de visualisation des journaux?
Pas grave c'est juste un problème de configuration de l'outil, il faudrait le reconfigurer et comme je ne l'utilise pas car avec systemd cet outil est devenu inutile, je ne sais pas te conseiller.

Synaptic, pareil, désinstaller et réinstaller devrait régler le problème.

Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail

Hors ligne

#12 Le 01/07/2015, à 12:12

olivi4

Re : Problème sauvegarde /home [Résolu]

Effectivement, la suppression et la réinstallation de synaptic a résolu le problème. Par contre, c'est avec l'imprimante que j'ai un souci. J'ai bien un dossier hplip dans mes téléchargements. J'ai rajouté mon imprimante pensant que cela allait me remettre les pilotes hplip, mais non. Je me suis rendu sur la page de téléchargements et j'ai téléchargé la derrnière version proposée, à savoir la 3.15.6, mais cela ne m'a téléchargé qu'un fichier run qui renvoie un message d'erreur lorsque je clique dessus. Si je suis ce qui est recommandé sur la page d'hplip, à savoir me placer dans le répertoire "Téléchargements" et que j'entre la commande :

 sh hplip-3.15.6. run

, j'ai ce message qui s'affiche : 

sh: 0: Can't open hplip-3.15.6.

Edit: Apparemment, il ne fallait pas d'espace entre 3.15.6. et run....

Dernière modification par olivi4 (Le 01/07/2015, à 12:15)

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#13 Le 01/07/2015, à 13:53

olivi4

Re : Problème sauvegarde /home [Résolu]

Autre problème.

J'utilisais teamviewer pour dépanner ma mère qui est à 1000 bornes de chez moi. Comme on m'avait dit qu'il fallait la même version de teamviewer sur les deux bécanes, j'ai téléchargé la version 7 sur leur site. Quand j'ouvre le .deb, j'ai la logithèque qui se lance et me donne ce message : 

La dépendance ne peut être satisfaite : lib32asound2

Que faire ? A noter que j'ai un dossier caché teamviewer.

Dernière modification par olivi4 (Le 01/07/2015, à 13:54)

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#14 Le 01/07/2015, à 14:31

maxire

Re : Problème sauvegarde /home [Résolu]

Ben là tu t'éloignes du sujet initial, si tu veux élargir le champ des personnes susceptibles de répondre, ouvres un nouveau fil.

Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail

Hors ligne

#15 Le 01/07/2015, à 15:16

olivi4

Re : Problème sauvegarde /home [Résolu]

Ok.

Pour teamviewer, problème résolu en suivant ce tuto.

Il ne me reste donc plus qu'à supprimer le dossier sauvegarde_usb qui appartient à root et se trouve dans la corbeille...

Corbeille vidée en faisant un 

sudo su

Suivi d'un 

apt-get install trash-cli

Et pour finir un 

trash-empty

Dernière modification par olivi4 (Le 06/07/2015, à 11:33)

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

Pages : 1