#1 Le 14/07/2015, à 01:26
- Compte anonymisé
Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Bonjour,
J'ai acheté un pc "Packard Bell Imedia S-A44G2TU03" à la fnac. Comme la plupart des ordinateurs de maintenant, il démarre directement sur windows 8.
J'ai essayé d'installer linux via différentes clés usb, mais aucunes ne se lancent au démarrage de l'ordinateur.
Une idée ?
Edit : j'ai bien désactiver le secure-boot et mit en legacy.
Edit2 : en utilisant belarc advisor , il semblerait que le modele du pc soit en faites un : Packard Bell imedia S2190
Dernière modification par lerenardmalin (Le 14/07/2015, à 05:53)
#2 Le 14/07/2015, à 06:53
- malbo
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Edit : j'ai bien désactiver le secure-boot et mit en legacy.
Attention : il ne faut pas mettre en Legacy. Je te prie de laisser le Boot mode en UEFI uniquement. En effet, Windows 8 préinstallé est toujours installé en mode EFI et il est impératif d'essayer et d'installer Ubuntu également en mode EFI (voir mon Tuto "Installer Ubuntu en mode EFI ou en mode BIOS")
Je te prie de refaire une LiveUSB en suivant scrupuleusement cette recette : http://forum.ubuntu-fr.org/viewtopic.php?id=1790091
Elle permettra d'essayer puis d'installer Ubuntu 14.04.2 64 bits parce que je suis certain que cette version convient à ton APU (AMD A4-6210). En effet, j'ai déjà connu un cas sur le forum où cette version a été installée dans un ordi équipé de cet APU (c'est là)
Quand tu auras fait cette LiveUSB, je te recommande de suivre le pas à pas de Étape 2 Redémarrer en mode EFI avec Windows du tuto "efi un jeu d'enfant"
Si ça se passe bien, tu devrais pouvoir démarrer ton ordi sur cette LiveUSB et essayer Ubuntu sans l'installer. Raconte.
Pour l'installation sur disque dur, je te propose de suivre ce même tuto "efi un jeu d'enfant" du site "Libre à Quimperlé"
Sans négliger le tout début de ce tuto :
Je compte sur vous pour sauvegarder le système Windows 8 sur une clé USB pour la garantie.
http://windows.microsoft.com/fr-fr/windows-8/create-usb-recovery-drive
En effet, en cas de grosse tuile, il faut pouvoir réinstaller Windows 8 et on a l'air bien bête quand on n'a rien prévu pour ça (exemple très récent de grosse cata : ici)
Dernière modification par malbo (Le 14/07/2015, à 07:32)
Hors ligne
#3 Le 14/07/2015, à 09:00
- Compte anonymisé
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Apres mes tests, je ne sais pas si cela vient de mes clés usb. Cependant aucunes ne marchaient, j'ai dû créer un live-dvd d'ubuntu et là il a démarrer sans problème.
#4 Le 14/07/2015, à 09:04
- malbo
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
j'ai dû créer un live-dvd d'ubuntu et là il a démarrer sans problème.
C'est formidable. Je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse. Motif de ma demande : vérifier s'il n'y a pas un partitionnement spécial qui serait néfaste pour l'install et vérifier si tu parviens bien à démarrer en mode EFI sur ton LiveDVD (là, j'ai de gros doutes).
Dernière modification par malbo (Le 14/07/2015, à 09:06)
Hors ligne
#5 Le 14/07/2015, à 09:55
- Compte anonymisé
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Aucun soucis à l'installation .
J'ai formaté manuellement comme ceux ci :
Modèle: ATA ST2000DM001-1CH1 (scsi)
Disque /dev/sda : 2000GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : gpt
Numéro Début Fin Taille Système de fichiers Nom Fanions
1 1049kB 299MB 298MB fat32 démarrage
2 299MB 8298MB 8000MB linux-swap(v1)
3 8298MB 18,3GB 10,0GB ext4
4 18,3GB 2000GB 1982GB ext4
pour le 10 GB il s'agit de / et pour le 1982GB il s'agit de /home.
Il est donc possible de faire un dvd ubuntu uefi et d'installer ensuite ubuntu.
Je me suis aidé d'un ancien post pour un ancien pc que j'avais : http://forum.ubuntu-fr.org/viewtopic.php?id=1272091 .
Pour la swap, je sais plus ce qu'on disait ... ajouter le double de la mémoire ram, comme j'ai 4 giga de ram, j'ai mis 8 giga de swap.
J'ai bien sûr tester l'ensemble des choses avant d'installer et ça m'a l'air de marcher parfaitement
Dernière modification par lerenardmalin (Le 14/07/2015, à 10:03)
#6 Le 14/07/2015, à 10:01
- malbo
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Je vois dans le partitionnement que tu as collé dans ton post #5 que tu n'as plus de Windows 8 sur ce disque dur : c'est vraiment ce que tu voulais de virer Windows 8 de cet ordi ?
Dernière modification par malbo (Le 14/07/2015, à 10:17)
Hors ligne
#7 Le 14/07/2015, à 10:06
- Compte anonymisé
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
J'ai acheté le pc sous windows car il était moins cher, mais je voulais linux dessus.
Le problème venait effectivement des clés usb, mais j'ignore pourquoi ...
Dernière modification par lerenardmalin (Le 14/07/2015, à 10:08)
#8 Le 14/07/2015, à 10:15
- malbo
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Si j'avais compris dès le départ de cette discussion que tu souhaitais virer carrément Windows 8 de l'ordi, je ne me serais pas fatigué à te donner mille conseils dans le post #2 : j'étais persuadé que tu souhaitais conserver Windows 8 et installer Ubuntu en cohabitation. Ce serait bien utile - ne serait-ce que pour toi en cas de coup dur ultérieur parce que c'est une sorte de photo de ton install - que tu démarres une session sur ton Ubuntu fraîchement installé et que tu fasse un Boot-Info depuis cette session. Tu posteras l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#9 Le 14/07/2015, à 10:41
- Compte anonymisé
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
#10 Le 14/07/2015, à 10:51
- malbo
Re : Installer linux sur un Packard Bell Imedia S-A44G2TU03 (S2190)
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 3,907,029,167 3,907,029,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 583,679 581,632 EFI System partition
/dev/sda2 583,680 16,207,871 15,624,192 Swap partition (Linux)
/dev/sda3 16,207,872 35,739,647 19,531,776 Data partition (Linux)
/dev/sda4 35,739,648 3,907,028,991 3,871,289,344 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 93A9-D44F vfat
/dev/sda2 038bea8a-541c-4542-8d55-986adf5ee0e9 swap
/dev/sda3 62b68856-8978-43df-bbc4-f97080c76f81 ext4
/dev/sda4 4b87b158-4a8f-49be-9175-b3e0f1477c0c ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 14 11:04 ata-MATSHITA_DVD-RAM_SW830_KO0160700641 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 14 11:41 ata-ST2000DM001-1CH164_Z1E8E4LQ -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 14 11:04 ata-ST2000DM001-1CH164_Z1E8E4LQ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 14 11:04 ata-ST2000DM001-1CH164_Z1E8E4LQ-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 14 11:04 ata-ST2000DM001-1CH164_Z1E8E4LQ-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 14 11:04 ata-ST2000DM001-1CH164_Z1E8E4LQ-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jul 14 11:41 wwn-0x5000c5006753e78b -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 14 11:04 wwn-0x5000c5006753e78b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 14 11:04 wwn-0x5000c5006753e78b-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 14 11:04 wwn-0x5000c5006753e78b-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 14 11:04 wwn-0x5000c5006753e78b-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda3 / ext4 (rw,errors=remount-ro)
/dev/sda4 /home ext4 (rw)
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_BE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-62b68856-8978-43df-bbc4-f97080c76f81' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-62b68856-8978-43df-bbc4-f97080c76f81' {
menuentry 'Ubuntu, avec Linux 3.16.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-advanced-62b68856-8978-43df-bbc4-f97080c76f81' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-recovery-62b68856-8978-43df-bbc4-f97080c76f81' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-62b68856-8978-43df-bbc4-f97080c76f81' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-62b68856-8978-43df-bbc4-f97080c76f81' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 62b68856-8978-43df-bbc4-f97080c76f81
else
search --no-floppy --fs-uuid --set=root 62b68856-8978-43df-bbc4-f97080c76f81
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=62b68856-8978-43df-bbc4-f97080c76f81 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=93A9-D44F /boot/efi vfat defaults 0 1
# /home was on /dev/sda4 during installation
UUID=4b87b158-4a8f-49be-9175-b3e0f1477c0c /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=038bea8a-541c-4542-8d55-986adf5ee0e9 none swap sw 0 0
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-07-14__11h40 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=62b68856-8978-43df-bbc4-f97080c76f81 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda3:L'OS actuellement utilisé - Ubuntu 14.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="93A9-D44F" TYPE="vfat"
/dev/sda2: UUID="038bea8a-541c-4542-8d55-986adf5ee0e9" TYPE="swap"
/dev/sda3: UUID="62b68856-8978-43df-bbc4-f97080c76f81" TYPE="ext4"
/dev/sda4: UUID="4b87b158-4a8f-49be-9175-b3e0f1477c0c" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 jui 14 10:44 grub.d
total 76
-rwxr-xr-x 1 root root 9424 jun 26 13:16 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda3: UUID=93A9-D44F (sda1)
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...2................
Boot0002* ubuntu HD(1,800,8e000,2a59434c-b5c9-4f17-a08a-224b1eee87ca)File(EFIubuntushimx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda3 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda4 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST2000DM001-1CH1 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 299MB 298MB fat32 boot
2 299MB 8298MB 8000MB linux-swap(v1)
3 8298MB 18.3GB 10.0GB ext4
4 18.3GB 2000GB 1982GB ext4
=================== parted -lm:
BYT;
/dev/sda:2000GB:scsi:512:4096:gpt:ATA ST2000DM001-1CH1;
1:1049kB:299MB:298MB:fat32::boot;
2:299MB:8298MB:8000MB:linux-swap(v1)::;
3:8298MB:18.3GB:10.0GB:ext4::;
4:18.3GB:2000GB:1982GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 1,8T ST2000DM001-
sda1 part vfat 284M 93A9-D44F
sda2 part swap 7,5G 038bea8a-541c-4542-8d55-986adf5ee0e9
sda3 part ext4 9,3G 62b68856-8978-43df-bbc4-f97080c76f81
sda4 part ext4 1,8T 4b87b158-4a8f-49be-9175-b3e0f1477c0c
sr0 rom 1024M DVD-RAM SW83
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /boot/efi
sda2 1 0 0 [SWAP]
sda3 1 0 0 /
sda4 1 0 0 /home
sr0 1 0 1 running
=================== mount:
/dev/sda3 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
/dev/sda4 on /home type ext4 (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=soulignac)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hpet hwrng input kmsg kvm log mapper mcelog media0 mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 e0 08 00 37 02 00 00 00 00 00 00 02 00 00 00 |....7...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 4f d4 a9 93 4e 4f 20 4e 41 4d 45 20 20 |..)O...NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda3 ext4 9.1G 4.8G 3.8G 56% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.3M 331M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 1.2M 1.7G 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sda1 vfat 284M 3.4M 281M 2% /boot/efi
/dev/sda4 ext4 1.8T 162M 1.7T 1% /home
=================== fdisk -l:
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2d9760bc
Device Boot Start End Blocks Id System
/dev/sda1 1 3907029167 1953514583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda3, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== User settings
The settings chosen by the user will not act on the boot.
La partie paramétrage du démarrage est très succincte :
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0000
Boot0000 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...2................
Boot0002* ubuntu HD(1,800,8e000,2a59434c-b5c9-4f17-a08a-224b1eee87ca)File(EFIubuntushimx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
On y voit que le démarrage par défaut se fait sur l'entrée Boot0002 (ubuntu). Ce qui est étrange, c'est qu'il n'y a pas d'entrée pour le CD ou d'autres périphériques. D'habitude, c'est bien garni (EDIT : ben non : je viens de faire des recherches sur les Packard Bell Imedia qu'on a vu passer sur le forum et effectivement il y a très peu d'entrées dans l'UEFI. Donc c'est peut-être normal)
On peut noter la présence d'une entrée inutilisable pour Windows (puisqu'il n'y a plus de Windows là-dedans) mais on s'en fout.
D'autre part, tu as désactivé "Secure Boot" comme tu l'avais effectivement signalé dans ton post #1.
Dernière modification par malbo (Le 14/07/2015, à 11:07)
Hors ligne