#1 Le 18/07/2015, à 17:34
- Amekoa
[Résolu] Probleme de redémarrage
Ai probleme de redemarrage apres installation ubuntu 14.04 LTS en duo boot avec Windows 8 puis sur disque dur externe. Ai utilise repair boot suivant les tutos et ai eu http://paste.ubuntu.com/11898909/
Aidez moi
Dernière modification par Amekoa (Le 24/07/2015, à 11:51)
Hors ligne
#2 Le 18/07/2015, à 18:04
- malbo
Re : [Résolu] Probleme de redémarrage
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2074272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 30,296,447 30,296,385 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sdb1 B632-6930 vfat TOSHIBA
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 18 15:08 ata-ST1000DM003-1CH162_Z1D9GH5C -> ../../sda
lrwxrwxrwx 1 root root 9 Jul 18 14:53 ata-hp_DVDRAM_GTA0N_B4ARQP2049516 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 18 15:08 usb-TOSHIBA_TransMemory_8998F531B3FCCE812BC33AA0-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 18 14:53 usb-TOSHIBA_TransMemory_8998F531B3FCCE812BC33AA0-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jul 18 15:08 wwn-0x5000c50065f8c11f -> ../../sda
lrwxrwxrwx 1 root root 9 Jul 18 14:53 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/6058/mounts) leaked on lvs invocation. Parent PID 10834: bash
File descriptor 63 (pipe:[55712]) leaked on lvs invocation. Parent PID 10834: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-07-18__15h07 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sdb1: LABEL="TOSHIBA" UUID="B632-6930" TYPE="vfat"
=================== efibootmgr -v
BootCurrent: 0015
Timeout: 2 seconds
BootOrder: 0011,0012,0015,0010,000B,0013,0014,0000,0001
Boot0000* Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot000B* UEFI: IPv6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
Boot0010* UEFI: IPv4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0..BO
Boot0011* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0012* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0013 USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0014 Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)..BO
Boot0015* UEFI: TOSHIBA TransMemory 1.00 ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(2,0)HD(1,3f,1ce4941,2d273ca1)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: TOSHIBA TransMemory (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 15.5GB 15.5GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:TOSHIBA TransMemory;
1:32.3kB:15.5GB:15.5GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931.5G ST1000DM
sdb disk 14.5G TransMem
sdb1 part vfat 14.5G TOSHIBA B632-6930
sr0 rom 1024M DVDRAM G
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
gvfsd-fuse on /home/ubuntu/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hpet input kmsg log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 117M 3.8G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 788M 1.4M 787M 1% /run
/dev/sdb1 vfat 15G 997M 14G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 1.2M 3.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.9G 76K 3.9G 1% /run/shm
none tmpfs 100M 68K 100M 1% /run/user
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xfa8228ea
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2d273ca1
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 30296447 15148192+ c W95 FAT32 (LBA)
Error: no partitions
=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
Additional repair would be performed: repair-filesystems
=================== User settings
The settings chosen by the user will not act on the boot.On y voit la LiveUSB "TOSHIBA TransMemory" sur laquelle tu as démarré en session live (en mode EFI) pour faire le Boot-Info. Et on y voit un disque dur ST1000DM003-1CH1 de 1 To (Seagate Barracuda 7200.14 SATA 1 To). Est-ce que ce disque de 1 To est le disque externe dont tu parles ou bien est-ce un disque interne ?
Hors ligne
#3 Le 18/07/2015, à 20:42
- Amekoa
Re : [Résolu] Probleme de redémarrage
En fait le disque dur ST1000DM003-1CH1 de 1 To est le disque dur interne. Je vous fait savoir que je suis un novice pour que vos explications puissent m'être accessibles. Merci d'avance
Hors ligne
#4 Le 18/07/2015, à 20:47
- malbo
Re : [Résolu] Probleme de redémarrage
Amekoa a écrit :
En fait le disque dur ST1000DM003-1CH1 de 1 To est le disque dur interne.
Dans ce cas, ton disque externe n’apparaît pas dans le Boot-Info : il n'est pas détecté par ton Bios. Peut-être parce qu'il n'est pas connecté ou parce qu'il est mort. Je te conseillerais de connecter ce disque externe à un autre ordi pour vérifier s'il est bien détecté ou non par le Bios de cet autre ordi. S'il n'est pas détecté non plus, c'est qu'il est mort.
Dernière modification par malbo (Le 18/07/2015, à 20:48)
Hors ligne
#5 Le 18/07/2015, à 20:59
- Amekoa
Re : [Résolu] Probleme de redémarrage
Il est détecté. J'ai une clé live USB qui lance l'ordinateur avec "Try Ubuntu" qui détecte le disque dur externe qui est affiché dans le menu de la barre latérale. Mais dès que j'enlève la clé USB, l'ordinateur affiche qu'aucun dispositif de démarrage n'est installé dans le Système.
Disque Dur - (3FO)
F2 Diagnostique du Système
Pour obtenir plus d'information, visiter http://www.hp.com/go/techcenter/startup
Voilà. Je crois que lorsque j'ai fait le boot repair je n'avais pas connecté le disque dur externe.
Hors ligne
#6 Le 18/07/2015, à 21:42
- Amekoa
Re : [Résolu] Probleme de redémarrage
J'ai connecté le disque dur externe à un autre ordinateur qui l'a également détecté. Je tenais à vous en informer, au cas où...
Hors ligne
#7 Le 19/07/2015, à 07:35
- malbo
Re : [Résolu] Probleme de redémarrage
Amekoa a écrit :
Voilà. Je crois que lorsque j'ai fait le boot repair je n'avais pas connecté le disque dur externe.
Très rusé.
Je te prie de démarrer l'ordinateur sur ta clé live USB avec "Try Ubuntu", de connecter le disque dur externe et de refaire un Boot-Info (le disque dur externe étant connecté). Tu donneras l'URL de ce Boot-Info dans ta réponse.
Dernière modification par malbo (Le 19/07/2015, à 07:36)
Hors ligne
#8 Le 19/07/2015, à 09:39
- Amekoa
Re : [Résolu] Probleme de redémarrage
J'ai suivi tes recommandations et voici l'URL du nouveau boot-info
http://paste.ubuntu.com/11902696/
Hors ligne
#9 Le 19/07/2015, à 09:54
- malbo
Re : [Résolu] Probleme de redémarrage
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub.
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2074272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 30,296,447 30,296,385 c W95 FAT32 (LBA)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 1000.2 GB, 1000204884480 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525165 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 1,190,759,852 1,190,757,805 7 NTFS / exFAT / HPFS
/dev/sdc2 1,190,760,448 1,207,144,447 16,384,000 82 Linux swap / Solaris
/dev/sdc3 1,207,146,494 1,953,523,711 746,377,218 5 Extended
/dev/sdc5 1,207,146,496 1,953,523,711 746,377,216 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sdb1 B632-6930 vfat TOSHIBA
/dev/sdc1 F086EAE086EAA676 ntfs TOSHIBA EXT
/dev/sdc2 084435cf-f7c4-4333-96f6-1636863d6672 swap
/dev/sdc5 8343c01d-f76c-4964-b255-b5cdeb059eeb ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 19 07:35 ata-ST1000DM003-1CH162_Z1D9GH5C -> ../../sda
lrwxrwxrwx 1 root root 9 Jul 19 07:27 ata-hp_DVDRAM_GTA0N_B4ARQP2049516 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 19 07:35 usb-TOSHIBA_External_USB_3.0_20121106025750-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 19 07:36 usb-TOSHIBA_External_USB_3.0_20121106025750-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Jul 19 07:27 usb-TOSHIBA_External_USB_3.0_20121106025750-0:0-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Jul 19 07:27 usb-TOSHIBA_External_USB_3.0_20121106025750-0:0-part3 -> ../../sdc3
lrwxrwxrwx 1 root root 10 Jul 19 07:27 usb-TOSHIBA_External_USB_3.0_20121106025750-0:0-part5 -> ../../sdc5
lrwxrwxrwx 1 root root 9 Jul 19 07:35 usb-TOSHIBA_TransMemory_8998F531B3FCCE812BC33AA0-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 19 07:27 usb-TOSHIBA_TransMemory_8998F531B3FCCE812BC33AA0-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jul 19 07:35 wwn-0x5000c50065f8c11f -> ../../sda
lrwxrwxrwx 1 root root 9 Jul 19 07:27 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc5 /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb ext4 (rw,nosuid,nodev,uhelper=udisks2)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=========================== sdc5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=8343c01d-f76c-4964-b255-b5cdeb059eeb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
menuentry 'Ubuntu, avec Linux 3.16.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-advanced-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=8343c01d-f76c-4964-b255-b5cdeb059eeb ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-recovery-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /boot/vmlinuz-3.16.0-43-generic.efi.signed root=UUID=8343c01d-f76c-4964-b255-b5cdeb059eeb ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic.efi.signed root=/dev/sdc5 ro quiet splash $vt_handoff
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-8343c01d-f76c-4964-b255-b5cdeb059eeb' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd2,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos5 --hint-efi=hd2,msdos5 --hint-baremetal=ahci2,msdos5 8343c01d-f76c-4964-b255-b5cdeb059eeb
else
search --no-floppy --fs-uuid --set=root 8343c01d-f76c-4964-b255-b5cdeb059eeb
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic.efi.signed root=/dev/sdc5 ro recovery nomodeset
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdc5 during installation
UUID=8343c01d-f76c-4964-b255-b5cdeb059eeb / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc2 during installation
UUID=084435cf-f7c4-4333-96f6-1636863d6672 none swap sw 0 0
--------------------------------------------------------------------------------
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/6206/mounts) leaked on lvs invocation. Parent PID 12632: bash
File descriptor 63 (pipe:[55578]) leaked on lvs invocation. Parent PID 12632: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-07-19__07h35 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
Unmount sdc1 from /media/ubuntu/TOSHIBA EXT to avoid space incompatibilities
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sdc5:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sdb1: LABEL="TOSHIBA" UUID="B632-6930" TYPE="vfat"
/dev/sdc1: LABEL="TOSHIBA EXT" UUID="F086EAE086EAA676" TYPE="ntfs"
/dev/sdc2: UUID="084435cf-f7c4-4333-96f6-1636863d6672" TYPE="swap"
/dev/sdc5: UUID="8343c01d-f76c-4964-b255-b5cdeb059eeb" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 févr. 18 19:38 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== efibootmgr -v
BootCurrent: 0008
Timeout: 0 seconds
BootOrder: 0001,0002,0008,0004,0005,0006,0007
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0004* UEFI: IPv4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0..BO
Boot0005* UEFI: IPv6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
Boot0006 USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0007 Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)..BO
Boot0008* UEFI: TOSHIBA TransMemory 1.00 ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(2,0)HD(1,3f,1ce4941,2d273ca1)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdc1.
sdc5 : sdc, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb.
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, liveusb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: TOSHIBA TransMemory (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 15.5GB 15.5GB primary fat32 boot, lba
Model: TOSHIBA External USB 3.0 (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 610GB 610GB primary ntfs boot
2 610GB 618GB 8389MB primary linux-swap(v1)
3 618GB 1000GB 382GB extended
5 618GB 1000GB 382GB logical ext4
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:TOSHIBA TransMemory;
1:32.3kB:15.5GB:15.5GB:fat32::boot, lba;
BYT;
/dev/sdc:1000GB:scsi:512:512:msdos:TOSHIBA External USB 3.0;
1:1049kB:610GB:610GB:ntfs::boot;
2:610GB:618GB:8389MB:linux-swap(v1)::;
3:618GB:1000GB:382GB:::;
5:618GB:1000GB:382GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931,5G ST1000DM
sdb disk 14,5G TransMem
sdb1 part vfat 14,5G TOSHIBA B632-6930
sdc disk 931,5G External
sdc1 part ntfs 567,8G TOSHIBA EXT
F086EAE086EAA676
sdc2 part swap 7,8G 084435cf-f7c4-4333-96f6-1636863d6672
sdc3 part 1K
sdc5 part ext4 355,9G 8343c01d-f76c-4964-b255-b5cdeb059eeb
sr0 rom 1024M DVDRAM G
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sdc2 1 0 0
sdc3 1 0 0
sdc5 1 0 0 /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sdc5 on /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb type ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 sdc2 sdc3 sdc5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hpet input kmsg log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sdb1 sdc sdc1 sdc2 sdc3 sdc5 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ac 85 f9 46 00 00 00 00 |...........F....|
00000030 00 00 0c 00 00 00 00 00 10 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 76 a6 ea 86 e0 ea 86 f0 |........v.......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 125M 3.8G 4% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 788M 1.4M 787M 1% /run
/dev/sdb1 vfat 15G 997M 14G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 1.2M 3.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.9G 80K 3.9G 1% /run/shm
none tmpfs 100M 56K 100M 1% /run/user
/dev/sdc5 ext4 351G 4.1G 329G 2% /media/ubuntu/8343c01d-f76c-4964-b255-b5cdeb059eeb
/dev/sdc1 fuseblk 568G 493G 76G 87% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xfa8228ea
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2d273ca1
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 30296447 15148192+ c W95 FAT32 (LBA)
Disk /dev/sdc: 1000.2 GB, 1000204884480 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525165 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x955471d3
Device Boot Start End Blocks Id System
/dev/sdc1 * 2048 1190759852 595378902+ 7 HPFS/NTFS/exFAT
/dev/sdc2 1190760448 1207144447 8192000 82 Linux swap / Solaris
/dev/sdc3 1207146494 1953523711 373188609 5 Extended
/dev/sdc5 1207146496 1953523711 373188608 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sdc5 into the MBR of sdc.
Additional repair would be performed: unhide-bootmenu-10s
=================== Advice in case of suggested repair
Le boot de votre PC est en mode EFI, mais aucune partition EFI n'a été détectée. Vous voudrez peut-être re-essayer après avoir créé une partition EFI (FAT32, 100MB~250MB, en début de disque, drapeau boot).
Voulez-vous continuer ?
=================== User settings
The settings chosen by the user will not act on the boot.On voit bien une installation de Ubuntu sur le disque dur externe. Mais tu avais mentionné dans ton post #1 : "en duo boot avec Windows 8" et moi je ne vois aucune installation de Windows 8 dans ce Boot-Info : ton disque dur interne apparaît comme un disque sans aucune partition comme on peut voir dans cet extrait :
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: TOSHIBA TransMemory (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 15.5GB 15.5GB primary fat32 boot, lba
Model: TOSHIBA External USB 3.0 (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 610GB 610GB primary ntfs boot
2 610GB 618GB 8389MB primary linux-swap(v1)
3 618GB 1000GB 382GB extended
5 618GB 1000GB 382GB logical ext4On voit bien à la fin les partitions du disque dur externe /dev/sdc mais on ne voit aucune partition pour le disque dur interne /dev/sda. Est-ce que c'est un accident ou bien est-ce que tu as supprimé volontairement Windows 8 ?
Dernière modification par malbo (Le 19/07/2015, à 09:58)
Hors ligne
#10 Le 19/07/2015, à 10:20
- Amekoa
Re : [Résolu] Probleme de redémarrage
Quand j'ai installé Ubuntu 14.04 LTS aux côtés de Windows 8, au redemarrage, j'ai constaté que Ubuntu ne se voyait pas et l'ordinateur démarrait toujours sur Windows. J'ai alors utilisé Gparted par le biais de "Try Ubuntu" pour voir si les partitions dont celles de Ubuntu étaient bien là. Eh bien, elles étaient bien là. Je ne comprenais pas ce qui se passait. Pour entrer dans le Bios, j'ai suivi les instruction de Windows : Cambio de Configuration (Changement de Paramètres)- etc. En entrant dans le bios, Ubuntu se voyait bien, mais quand je le lance, l'ordinateur finissait toujours par démarrer sur Windows. J'ai alors décidé d'installer Ubuntu sur le disque dur externe, et voilà où j'en suis. Ah j'oubliais, quand je suis entré dans PC dans Gérer et dans Disque Dur après l'installation d'Ubuntu sur le Disque Externe, il n'y avait plus les partitions. C'était comme si toutes les partitions avaient été supprimées. Il y a à la place, un seul espace gris d'un bout à l'autre. Voilà.
Hors ligne
#11 Le 19/07/2015, à 10:30
- Amekoa
Re : [Résolu] Probleme de redémarrage
Je viens de faire une revérification du disque dur interne avec Gparted par le biais de "Try Ubuntu". Le Disque est sans aucune partition. Message affiché : Unallocated 931.51 Gib
Je pense que tout a été supprimé sur le Disque Dur interne, sans que je sache comment. Comment faire ?
Hors ligne
#12 Le 19/07/2015, à 11:16
- malbo
Re : [Résolu] Probleme de redémarrage
Si tu as des données très précieuses pour toi sur ce disque dur interne et que tu n'as pas pris la précaution d'en faire la sauvegarde avant le drame, je te recommande de ne pas chercher à dépanner toi-même parce que tu risquerais de tout perdre : adresse-toi à un professionnel de la récupération de données (tu peux contacter par mail un vrai spécialiste sur ce site). Si tu as pris tes précautions et que tu as fait tes sauvegardes, tu peux essayer de retrouver tes partitions à l'aide de Testdisk : http://www.cgsecurity.org/wiki/TestDisk_FR
Hors ligne
#13 Le 19/07/2015, à 11:47
- Amekoa
Re : [Résolu] Probleme de redémarrage
Merci. Rien de important sur le disque dur interne. Mais jai pas de sauvegarde non plus. La recuperation des partitions pas importante si pas incidence sur la reinstallation de windows 8 et de Ubuntu. Mais le texte est en anglais. Puis je avoir une procedure simple en francais
Hors ligne
#14 Le 19/07/2015, à 11:51
- Amekoa
Re : [Résolu] Probleme de redémarrage
Mille excuses, il y a la version en francais de la procedure. Je voudrais savoir si on ne peut pas aller directement pour installer Ubuntu. Si oui, comment faire
Hors ligne
#15 Le 19/07/2015, à 12:01
- Amekoa
Re : [Résolu] Probleme de redémarrage
Je suis novice et je ne connais pas les commandes pour installer et lancer testdisk. Au secours
Hors ligne
#16 Le 19/07/2015, à 14:58
- malbo
Re : [Résolu] Probleme de redémarrage
Je pense que tu peux l'installer depuis une session live de Ubuntu en passant la commande suivante dans un terminal :
sudo apt-get updatepuis la commande d'installation de Tesdisk :
sudo apt-get install testdiskAprès installation, tu pourras lancer Testdisk en passant cette commande :
sudo testdiskDernière modification par malbo (Le 19/07/2015, à 15:00)
Hors ligne
#17 Le 19/07/2015, à 23:20
- Amekoa
Re : [Résolu] Probleme de redémarrage
Voila ce que je trouve
TestDisk 6.14, Data Recovery Utility, July 2013
Christophe GRENIER <grenier@cgsecurity.org>
[url]http://www.cgsecurity.org[/url]
Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Partition Start End Size in sectors
> HPFS - NTFS 0 32 33 130 138 8 2095104 [Windows RE tools]
FAT32 130 138 9 176 110 62 737280 [SYSTEM]
HPFS - NTFS 192 192 1 67945 72 31 1088444416 [Windows]
Linux 67945 72 32 119187 25 6 823199744
Linux Swap 119187 25 7 120217 136 47 16553984
HPFS - NTFS 120217 136 48 121600 150 22 22218752 [Recovery Image]
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 1072 MB / 1023 MiBLa partie qui se termine avec [Windows Re tools] est surligne. Que dois-je faire maintenant
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 20/07/2015, à 08:53)
Hors ligne
#18 Le 20/07/2015, à 08:03
- malbo
Re : [Résolu] Probleme de redémarrage
Toutes les partitions que tu as trouvées sont les bonnes. Il manque une seule partition, c'est la partition "Microsoft Reserved Partition", une partition sans format qui se trouve entre la partition [SYSTEM] et la partition [Windows].
Par identification avec ce que je vois dans ce post, je peux dire :
- partition label "Windows RE tools" :
HPFS - NTFS 0 32 33 130 138 8 2095104 [Windows RE tools] - partition EFI qui porte le label "SYSTEM" :
FAT32 130 138 9 176 110 62 737280 [SYSTEM]- partition système de Windows (le disque C: ) ; elle porte le label "Windows" :
HPFS - NTFS 192 192 1 67945 72 31 1088444416 [Windows]- partition racine d'un Ubuntu que tu as installé sur ce disque :
Linux 67945 72 32 119187 25 6 823199744- partition swap de ce Ubuntu :
Linux Swap 119187 25 7 120217 136 47 16553984- partition recovery permettant de restaurer Windows 8 :
HPFS - NTFS 120217 136 48 121600 150 22 22218752 [Recovery Image]Tout est correct, il n'y a plus qu'à valider cela. Le souci c'est que je ne pratique pas assez Testdisk pour te guider en pas à pas pour la suite. Ce que je sais, c'est qu'à un moment donné, il faudra que tu sélectionnes "Write" afin que ce partitionnement soit effectivement réécrit dans la table de partition de ce disque. Tant que tu n'auras pas sélectionné "Write", la réparation ne sera pas faite.
Dernière modification par malbo (Le 20/07/2015, à 08:16)
Hors ligne
#19 Le 20/07/2015, à 10:45
- Amekoa
Re : [Résolu] Probleme de redémarrage
Je crois avoir un Windows Recovery sur le disque dur externe. Comment faire pour reinstaller Windows a partir de Recovery. Ceci est une alternative au cas je ne reussis pas avec Testdisk
Hors ligne
#20 Le 20/07/2015, à 13:14
- malbo
Re : [Résolu] Probleme de redémarrage
Amekoa a écrit :
Je crois avoir un Windows Recovery sur le disque dur externe.
Moi je ne sais pas à quoi tu fais allusion. Demande sur un forum Windows : il y a peut-être des spécialistes Windows qui verront de quoi il s'agit.
Hors ligne
#21 Le 20/07/2015, à 21:18
- Amekoa
Re : [Résolu] Probleme de redémarrage
Bonsoir, pour couper court, j'ai décider d'installer Ubuntu sur la totalité du disque dur, en supprimant donc Windows. Mais au terme de l'installation, je vois affiché qu'aucun système opératif n'est installé. Dans mon cas, que dois-je faire pour installer Ubuntu en remplacement total de Windows ? Merci d'avance
Hors ligne
#22 Le 21/07/2015, à 05:21
- malbo
Re : [Résolu] Probleme de redémarrage
Pour que je puisse voir où tu en es, je te prie de NE PAS connecter le disque dur externe, puis de démarrer ton ordi sur ta clé live USB avec "Try Ubuntu" et de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.
EDIT : je te prie d'indiquer également le nom complet du modèle de ton ordi et son fabricant.
Dernière modification par malbo (Le 21/07/2015, à 05:24)
Hors ligne
#23 Le 22/07/2015, à 05:02
- Amekoa
Re : [Résolu] Probleme de redémarrage
Voici le boot-info URL
http://paste.ubuntu.com/11917847/
Nom Complet Ordinateur de Bureau 22-h 040es
Fabricant HP
Date BIOS 11/19/2013
Merci
Hors ligne
#24 Le 22/07/2015, à 07:31
- malbo
Re : [Résolu] Probleme de redémarrage
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
59086608 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt2)/boot/grub.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg
sda3: __________________________________________________________________________
File system: crypto_LUKS
Boot sector type: Unknown
Boot sector info:
sda4: __________________________________________________________________________
File system:
Boot sector type: Windows 8/2012: NTFS
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2074272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,050,623 1,048,576 b W95 FAT32
/dev/sda2 1,050,624 1,550,335 499,712 83 Linux
/dev/sda3 1,550,336 1,554,431 4,096 83 Linux
/dev/sda4 3,096,576 1,931,294,719 1,928,198,144 7 NTFS / exFAT / HPFS
GUID Partition Table detected, but does not seem to be used.
Partition Start Sector End Sector # of Sectors System
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 30,296,447 30,296,385 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 1E25-AEA2 vfat
/dev/sda2 90a7688e-384f-40ed-891a-609e684f7e2f ext2
/dev/sda3 a0e43907-81f3-4d0d-baf7-dc09ac25dc80 crypto_LUKS
/dev/sdb1 EE98-593C vfat LEOKOK
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 22 02:53 ata-ST1000DM003-1CH162_Z1D9GH5C -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 22 02:24 ata-ST1000DM003-1CH162_Z1D9GH5C-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 22 02:24 ata-ST1000DM003-1CH162_Z1D9GH5C-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 22 02:24 ata-ST1000DM003-1CH162_Z1D9GH5C-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 22 02:24 ata-ST1000DM003-1CH162_Z1D9GH5C-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jul 22 02:24 ata-hp_DVDRAM_GTA0N_B4ARQP2049516 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 22 02:53 usb-TOSHIBA_TransMemory_3C7C152B794ECD70934891A8-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 22 02:24 usb-TOSHIBA_TransMemory_3C7C152B794ECD70934891A8-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jul 22 02:53 wwn-0x5000c50065f8c11f -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 22 02:24 wwn-0x5000c50065f8c11f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 22 02:24 wwn-0x5000c50065f8c11f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 22 02:24 wwn-0x5000c50065f8c11f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 22 02:24 wwn-0x5000c50065f8c11f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jul 22 02:24 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
============================= sda2/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
font="/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
linux /vmlinuz-3.16.0-43-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-3.16.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
menuentry 'Ubuntu, avec Linux 3.16.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-advanced-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /vmlinuz-3.16.0-43-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-43-generic-recovery-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
echo 'Chargement de Linux 3.16.0-43-generic…'
linux /vmlinuz-3.16.0-43-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-3.16.0-43-generic
}
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /vmlinuz-3.16.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-89874e24-6a7b-4df7-bea5-4150b853fcb7' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 90a7688e-384f-40ed-891a-609e684f7e2f
else
search --no-floppy --fs-uuid --set=root 90a7688e-384f-40ed-891a-609e684f7e2f
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /vmlinuz-3.16.0-30-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 4c 55 4b 53 ba be 00 01 61 65 73 00 00 00 00 00 |LUKS....aes.....|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 00 00 00 00 00 00 00 00 78 74 73 2d 70 6c 61 69 |........xts-plai|
00000030 6e 36 34 00 00 00 00 00 00 00 00 00 00 00 00 00 |n64.............|
00000040 00 00 00 00 00 00 00 00 73 68 61 31 00 00 00 00 |........sha1....|
00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000060 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 40 |...............@|
00000070 a9 8f a5 b0 9e af 4e c5 ea f2 1b d1 ec 07 c9 61 |......N........a|
00000080 97 34 cc d7 6e 93 b7 e5 e1 0f 85 7b fe 4e b0 6f |.4..n......{.N.o|
00000090 34 ce c2 ea ac 6a dc c2 10 f0 c8 05 56 02 cd 47 |4....j......V..G|
000000a0 6e 8f 7d 35 00 00 dc 37 61 30 65 34 33 39 30 37 |n.}5...7a0e43907|
000000b0 2d 38 31 66 33 2d 34 64 30 64 2d 62 61 66 37 2d |-81f3-4d0d-baf7-|
000000c0 64 63 30 39 61 63 32 35 64 63 38 30 00 00 00 00 |dc09ac25dc80....|
000000d0 00 ac 71 f3 00 03 78 18 2d 42 92 ad 32 ab e3 f1 |..q...x.-B..2...|
000000e0 92 39 72 61 78 1f 38 9b 67 b2 64 40 59 d7 23 6d |.9rax.8.g.d@Y.#m|
000000f0 61 a1 5c ce c7 a9 5f 3a 00 00 00 08 00 00 0f a0 |a.\..._:........|
00000100 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000120 00 00 00 00 00 00 00 00 00 00 02 00 00 00 0f a0 |................|
00000130 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000150 00 00 00 00 00 00 00 00 00 00 03 f8 00 00 0f a0 |................|
00000160 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 05 f0 00 00 0f a0 |................|
00000190 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 00 00 00 00 00 00 00 00 00 00 07 e8 00 00 0f a0 |................|
000001c0 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 09 e0 00 00 0f a0 |................|
000001f0 00 00 de ad 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/5076/mounts) leaked on lvs invocation. Parent PID 11146: bash
File descriptor 63 (pipe:[60584]) leaked on lvs invocation. Parent PID 11146: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-07-22__02h53 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
mount: unknown filesystem type 'crypto_LUKS'
mount /dev/sda3 : Error code 32
mount -r /dev/sda3 /mnt/boot-sav/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount -r /dev/sda3 : Error code 32
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="1E25-AEA2" TYPE="vfat"
/dev/sda2: UUID="90a7688e-384f-40ed-891a-609e684f7e2f" TYPE="ext2"
/dev/sda3: UUID="a0e43907-81f3-4d0d-baf7-dc09ac25dc80" TYPE="crypto_LUKS"
/dev/sdb1: LABEL="LEOKOK" UUID="EE98-593C" TYPE="vfat"
mount: unknown filesystem type 'crypto_LUKS'
mount /dev/sda3 : Error code 32
mount -r /dev/sda3 /mnt/boot-sav/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount -r /dev/sda3 : Error code 32
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== efibootmgr -v
BootCurrent: 0007
Timeout: 0 seconds
BootOrder: 0001,0002,0007,0003,0004,0005,0006
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* UEFI: IPv4 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0..BO
Boot0004* UEFI: IPv6 Realtek PCIe GBE Family Controller ACPI(a0341d0,0)PCI(1c,7)PCI(0,0)MAC(0025ab423e61,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
Boot0005 USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006 Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)..BO
Boot0007* UEFI: TOSHIBA TransMemory 1.00 ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(2,0)HD(1,3f,1ce4941,00065962)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, is-sepboot, grubenv-ok nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda3.
sda : GPT, no-BIOS_boot, has-maybe-EFI, not-usb, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table?
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Model: TOSHIBA TransMemory (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 15.5GB 15.5GB primary fat32 boot, lba
=================== parted -lm:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table?
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:TOSHIBA TransMemory;
1:32.3kB:15.5GB:15.5GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931.5G ST1000DM0
sda1 part vfat 512M 1E25-AEA2
sda2 part ext2 244M 90a7688e-384f-40ed-891a-609e684f7e2f
sda3 part crypto_L 2M a0e43907-81f3-4d0d-baf7-dc09ac25dc80
sda4 part 919.4G
sdb disk 14.5G TransMemo
sdb1 part vfat 14.5G LEOKOK EE98-593C
sr0 rom 1024M DVDRAM GT
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda4 1 0 0
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext2 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hpet input kmsg log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 a2 ae 25 1e 4e 4f 20 4e 41 4d 45 20 20 |..)..%.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 134M 3.8G 4% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 788M 1.4M 787M 1% /run
/dev/sdb1 vfat 15G 997M 14G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 4.4M 3.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 80K 3.9G 1% /run/shm
none tmpfs 100M 84K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext2 237M 95M 130M 43% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xfa8228ea
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1050623 524288 b W95 FAT32
/dev/sda2 1050624 1550335 249856 83 Linux
/dev/sda3 1550336 1554431 2048 83 Linux
/dev/sda4 3096576 1931294719 964099072 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00065962
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 30296447 15148192+ c W95 FAT32 (LBA)
No OS or WinEFI system
/boot detected. Please check the options.
=================== Recommended repair
The default repair of the Boot-Repair utility will not act on the MBR.
Additional repair will be performed: repair-filesystems
Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
fsck -fyM /dev/sda1
fsck from util-linux 2.20.1
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
fsck -fyM /dev/sda2
fsck from util-linux 2.20.1
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
fsck -fyM /dev/sda3
fsck from util-linux 2.20.1
fsck: fsck.crypto_LUKS: not found
fsck: error 2 while executing fsck.crypto_LUKS for /dev/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount /dev/sda3 : Error code 32
mount -r /dev/sda3 /mnt/boot-sav/sda3
mount: unknown filesystem type 'crypto_LUKS'
mount -r /dev/sda3 : Error code 32
Boot successfully repaired.
You can now reboot your computer.Il y a une anomalie :
=================== parted -l:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table?Cela signifie que ton disque dur n'est pas propre. Je te suggère de refaire l'installation mais à l'étape Type d'installation, il faudra faire ce qui suit :
- cocher "Effacer le disque et installer Ubuntu"
- NE PAS cocher la case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité"(*)
- NE PAS cocher la case "Utiliser LVM pour la nouvelle installation de Ubuntu"(*)
Après installation, si tu n'arrives toujours pas à démarrer sur Ubuntu, je te prie de ne rien tenter avec Boot-repair ou autre chose (sinon, moi je n'arrive plus à savoir si c'est l'installateur de Ubuntu qui part en vrille ou si c'est toi qui brouille les cartes) : contente-toi de refaire un Boot-Info et de poster ici pour en donner l'URL
(*) ce chiffrage est buggé : tu peux donc avoir du mal à le faire fonctionner à l'installation mais le pompon c'est qu'en cas de problème ultérieur, il n'y a personne pour t'aider.
EDIT : d'après ce que tu as indiqué dans ton post #23, ton ordi serait le modèle HP Pavilion 22-h040es dont on peut voir la description ici : http://www8.hp.com/h20195/v2/GetDocumen … =c04117515
Dernière modification par malbo (Le 22/07/2015, à 07:58)
Hors ligne
#25 Le 22/07/2015, à 09:25
- Amekoa
Re : [Résolu] Probleme de redémarrage
Exact, mon ordi est de ce modèle-là. J'ai essayé d'effacer le disque dur déjà à l'aide de Gparted. Je vais procéder à l'installation en suivant ton conseil avec l'espoir que mon utilisation de Gparted n'ai pas compliqué en outre tout le processus.
Hors ligne