Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/08/2008, à 17:13

Anium

[Résolu]Fluxbox - Impossible de lancer pulseaudio au demarage

Bonjour,
J'aimerais lancer pulseaudio au démarrage. Pour cela, j'ajoute cette commande à .fluxbox/startup :

pulseaudio -C &

Mais, ça ne marche pas.
J'ai essayé de passé par un script lançant cette même commande, toujours pas.
En mettant

exec pulseaudio -C &

Le plus étonnant, c'est que même en passant par fbrun, ça ne me lance pas pulseaudio...
Je comprends pas la...

Dernière modification par Anium (Le 28/08/2008, à 00:33)

Hors ligne

#2 Le 27/08/2008, à 17:18

Kanor

Re : [Résolu]Fluxbox - Impossible de lancer pulseaudio au demarage

Salut
essaye ça dans un terminal aprés le démarrage de flubox et donne le retour

pulseaudio -v

Hors ligne

#3 Le 27/08/2008, à 23:43

Anium

Re : [Résolu]Fluxbox - Impossible de lancer pulseaudio au demarage

Voila le resultat de la commmande

I: main.c: We're in the group 'pulse-rt', allowing real-time and high-priority s
cheduling.
I: core-util.c: Successfully gained nice level -11.
W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Opération non permise
W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Opération non permise
I: main.c: This is PulseAudio 0.9.10
I: main.c: Page size is 4096 bytes
I: main.c: Fresh high-resolution timers available! Bon appetit!
I: module-hal-detect.c: Trying capability alsa
I: alsa-util.c: PCM device front:3 refused our hw parameters: Argument invalide
I: alsa-util.c: PCM device surround40:3 refused our hw parameters: Argument inva
lide
I: alsa-util.c: PCM device surround41:3 refused our hw parameters: Argument inva
lide
I: alsa-util.c: PCM device surround50:3 refused our hw parameters: Argument inva
lide
I: alsa-util.c: PCM device surround51:3 refused our hw parameters: Argument inva
lide
I: alsa-util.c: PCM device surround71:3 refused our hw parameters: Argument inva
lide
W: alsa-util.c: Device hw:3 doesn't support 44100 Hz, changed to 16000 Hz.
W: alsa-util.c: Device hw:3 doesn't support 2 channels, changed to 1.
I: module-alsa-source.c: Successfully opened device hw:3.
I: module-alsa-source.c: Successfully enabled mmap() mode.
I: alsa-util.c: Successfully attached to mixer 'hw:3'
I: alsa-util.c: Cannot find mixer control "Capture".
I: alsa-util.c: Using mixer control "Mic".
I: source.c: Created source 0 "alsa_input.usb_device_46d_8d9_noserial_if1_alsa_c
apture_0" with sample spec "s16le 1ch 16000Hz"
I: module-alsa-source.c: Using 4 fragments of size 2204 bytes.
I: alsa-util.c: All 1 channels can be mapped to mixer channels. Using hardware v
olume control.
I: module.c: Loaded "module-alsa-source" (index: #0; argument: "device_id=3 sour
ce_name=alsa_input.usb_device_46d_8d9_noserial_if1_alsa_capture_0").
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.front.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM front:2
I: alsa-util.c: Couldn't open PCM device front:2: Aucun fichier ou répertoire de
 ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.surround40.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround40:2
I: alsa-util.c: Couldn't open PCM device surround40:2: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.surround51.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround41:2
I: alsa-util.c: Couldn't open PCM device surround41:2: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.surround51.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround50:2
I: alsa-util.c: Couldn't open PCM device surround50:2: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.surround51.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.Bt87x
.pcm.surround71.0:CARD=2'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround71:2
I: alsa-util.c: Couldn't open PCM device surround71:2: Aucun fichier ou répertoi
re de ce type
W: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 32000 Hz.
I: module-alsa-source.c: Successfully opened device hw:2.
I: module-alsa-source.c: Successfully enabled mmap() mode.
I: alsa-util.c: Successfully attached to mixer 'hw:2'
I: alsa-util.c: Using mixer control "Capture".
I: source.c: Created source 1 "alsa_input.pci_109e_878_alsa_capture_0" with samp
le spec "s16le 2ch 32000Hz"
I: module-alsa-source.c: Using 4 fragments of size 4092 bytes.
I: alsa-util.c: ALSA device lacks separate volumes control for channel 'front-ri
ght', falling back to software volume control.
I: module.c: Loaded "module-alsa-source" (index: #1; argument: "device_id=2 sour
ce_name=alsa_input.pci_109e_878_alsa_capture_0").
I: alsa-util.c: PCM device front:1 refused our hw parameters: Argument invalide
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.PC-Sp
eaker.pcm.surround40.0:CARD=1'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround40:1
I: alsa-util.c: Couldn't open PCM device surround40:1: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.PC-Sp
eaker.pcm.surround51.0:CARD=1'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround41:1
I: alsa-util.c: Couldn't open PCM device surround41:1: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.PC-Sp
eaker.pcm.surround51.0:CARD=1'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround50:1
I: alsa-util.c: Couldn't open PCM device surround50:1: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.PC-Sp
eaker.pcm.surround51.0:CARD=1'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround51:1
I: alsa-util.c: Couldn't open PCM device surround51:1: Aucun fichier ou répertoi
re de ce type
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.PC-Sp
eaker.pcm.surround71.0:CARD=1'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned err
or: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: Aucun fichier ou répert
oire de ce type
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM surround71:1
I: alsa-util.c: Couldn't open PCM device surround71:1: Aucun fichier ou répertoi
re de ce type
W: alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 37286 Hz.
W: alsa-util.c: Device hw:1 doesn't support 2 channels, changed to 1.
I: module-alsa-sink.c: Successfully opened device hw:1.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
I: alsa-util.c: Successfully attached to mixer 'hw:1'
I: alsa-util.c: Using mixer control "Master".
I: sink.c: Created sink 0 "alsa_output.platform_pcspkr_alsa_playback_0" with sam
ple spec "s16le 1ch 37286Hz"
I: source.c: Created source 2 "alsa_output.platform_pcspkr_alsa_playback_0.monit
or" with sample spec "s16le 1ch 37286Hz"
I: module-alsa-sink.c: Starting playback.
I: module.c: Loaded "module-alsa-sink" (index: #2; argument: "device_id=1 sink_n
ame=alsa_output.platform_pcspkr_alsa_playback_0").
I: module-alsa-sink.c: Successfully opened device front:0.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: Aucun fichier ou répertoire d
e ce type
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Master".
I: sink.c: Created sink 1 "alsa_output.pci_10de_6a_alsa_playback_0" with sample 
spec "s16le 2ch 44100Hz"
I: source.c: Created source 3 "alsa_output.pci_10de_6a_alsa_playback_0.monitor" 
with sample spec "s16le 2ch 44100Hz"
I: module-alsa-sink.c: Using 4 fragments of size 4408 bytes.
I: alsa-util.c: All 2 channels can be mapped to mixer channels. Using hardware v
olume control.
I: module-alsa-sink.c: Starting playback.
I: module.c: Loaded "module-alsa-sink" (index: #3; argument: "device_id=0 sink_n
ame=alsa_output.pci_10de_6a_alsa_playback_0").
I: module-alsa-source.c: Successfully opened device front:0.
I: module-alsa-source.c: Successfully enabled mmap() mode.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: Aucun fichier ou répertoire d
e ce type
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Capture".
I: source.c: Created source 4 "alsa_input.pci_10de_6a_alsa_capture_0" with sampl
e spec "s16le 2ch 44100Hz"
I: module-alsa-source.c: Using 4 fragments of size 4408 bytes.
I: alsa-util.c: All 2 channels can be mapped to mixer channels. Using hardware v
olume control.
I: module.c: Loaded "module-alsa-source" (index: #4; argument: "device_id=0 sour
ce_name=alsa_input.pci_10de_6a_alsa_capture_0").
I: module-hal-detect.c: Loaded 5 modules.
I: module.c: Loaded "module-hal-detect" (index: #5; argument: "").
I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: "socket=
"/tmp/.esd/socket"").
I: protocol-native.c: loading cookie from disk.
I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
I: sink.c: Created sink 2 "rtp" with sample spec "s16be 2ch 44100Hz"
I: source.c: Created source 5 "rtp.monitor" with sample spec "s16be 2ch 44100Hz"
I: module.c: Loaded "module-null-sink" (index: #8; argument: "sink_name=rtp form
at=s16be channels=2 rate=44100 description="RTP Multicast Sink"").
I: source-output.c: Created output 0 "RTP Monitor Stream" on rtp.monitor with sa
mple spec s16be 2ch 44100Hz and channel map front-left,front-right
I: module-rtp-send.c: RTP stream initialized with mtu 1280 on 224.0.0.56:46446, 
SSRC=0x06dba363, payload=10, initial sequence #23579
I: module-rtp-send.c: SDP-Data:
I: module-rtp-send.c: v=0
I: module-rtp-send.c: o=anium 3428865735 0 IN IP4 192.168.1.10
I: module-rtp-send.c: s=PulseAudio RTP Stream on debian
I: module-rtp-send.c: c=IN IP4 224.0.0.56
I: module-rtp-send.c: t=3428865735 0
I: module-rtp-send.c: a=recvonly
I: module-rtp-send.c: m=audio 46446 RTP/AVP 10
I: module-rtp-send.c: a=rtpmap:10 L16/44100/2
I: module-rtp-send.c: a=type:broadcast
I: module-rtp-send.c: EOF
I: module.c: Loaded "module-rtp-send" (index: #9; argument: "source=rtp.monitor 
loop=0").
I: module.c: Loaded "module-rtp-recv" (index: #10; argument: "").
I: protocol-native.c: using already loaded auth cookie.
I: protocol-native.c: using already loaded auth cookie.
I: module.c: Loaded "module-native-protocol-tcp" (index: #11; argument: "auth-an
onymous=1").
I: module.c: Loaded "module-esound-protocol-tcp" (index: #12; argument: "auth-an
onymous=1").
I: module.c: Loaded "module-zeroconf-publish" (index: #13; argument: "").
I: module.c: Loaded "module-gconf" (index: #14; argument: "").
I: module.c: Loaded "module-volume-restore" (index: #15; argument: "").
I: module.c: Loaded "module-default-device-restore" (index: #16; argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #17; argument: "").
I: module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
I: module.c: Loaded "module-x11-publish" (index: #19; argument: "").
I: main.c: Daemon startup complete.
I: module-zeroconf-publish.c: Successfully established service anium@debian: ALSA PCM on hw:1 (pcsp) via DMA.
I: module-zeroconf-publish.c: Successfully established service anium@debian: ALS
A PCM on front:0 (NVidia nForce2) via DMA.
I: module-zeroconf-publish.c: Successfully established service anium@debian: RTP
 Multicast Sink.
I: module-zeroconf-publish.c: Successfully established service anium@debian: ALS
A PCM on hw:3 (USB Audio) via DMA.
I: module-zeroconf-publish.c: Successfully established service anium@debian: ALS
A PCM on hw:2 (Bt87x Digital) via DMA.
I: module-zeroconf-publish.c: Successfully established service anium@debian: ALS
A PCM on front:0 (NVidia nForce2) via DMA.
I: module-zeroconf-publish.c: Successfully established main service.
I: module-suspend-on-idle.c: Source alsa_input.pci_10de_6a_alsa_capture_0 idle f
or too long, suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Source alsa_output.pci_10de_6a_alsa_playback_0.moni
tor idle for too long, suspending ...
I: module-suspend-on-idle.c: Source alsa_output.platform_pcspkr_alsa_playback_0.
monitor idle for too long, suspending ...
I: module-suspend-on-idle.c: Source alsa_input.pci_109e_878_alsa_capture_0 idle 
for too long, suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Source alsa_input.usb_device_46d_8d9_noserial_if1_a
lsa_capture_0 idle for too long, suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Sink rtp idle for too long, suspending ...
I: module-suspend-on-idle.c: Sink alsa_output.pci_10de_6a_alsa_playback_0 idle f
or too long, suspending ...
I: module-alsa-sink.c: Device suspended...
I: module-suspend-on-idle.c: Sink alsa_output.platform_pcspkr_alsa_playback_0 id
le for too long, suspending ...
I: module-alsa-sink.c: Device suspended...

Hors ligne

#4 Le 28/08/2008, à 00:33

Anium

Re : [Résolu]Fluxbox - Impossible de lancer pulseaudio au demarage

J'ai retiré l'option -C et ça marche correctement maintenant.
J'avais lu ça bêtement sur le site de pulseaudio.

Pour info voila ce que fait cette option -C : Open a command line on the running TTY after startup
Je ne comprend pas pourquoi ça doit interfère..

Hors ligne