Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/08/2015, à 17:22

fsamp

PC DELL DIMENSION 3100 ne démarre pas sur le DVD-R d'installation Ubun

Bonjour,
Tout d'abord merci pour me lire et pour votre temps. J'ai un pc dell dimension 3100 avec le système d'explotation windows xp. J'ai ajouté deux barretes RAM 2 Go. J'ai téléchargé Ubuntu 14.04.3 LTS pour installer sur l'ordinateur, car je voulais virer windows. Ensuite je mets le DVD-R pour démarrer l'ordinateur, mais celui-ci ne démarre pas sur DVD-R et windows se relance à nouveau, alors je suis allé au BIOS et j'ai changer le boot device menu, j'ai mis en premier le lecteur "onboard or USB CD-ROM DRIVE, je sauvegarde avant de le quitter et je démarre à nouveau, et rien, windows se relance à nouveau. Alors que dois-je faire pour qu'au moment de démarrage le DVD-R AVEC Ubuntu se lence pour pouvoir l'installer?? Merci d'avance pour votre précieuse aide.

Hors ligne

#2 Le 17/08/2015, à 17:36

tux4fun

Re : PC DELL DIMENSION 3100 ne démarre pas sur le DVD-R d'installation Ubun

Bonsoir et en faisant F12 comme la doc le mentionne ?

Dimension3100 a écrit :

Changing Boot Sequence for the Current Boot

You can use this feature, for example, to restart your computer to a USB device such as a floppy drive, memory key, or CD-RW drive.
    NOTE: If you are booting to a USB floppy drive, you must first set the floppy drive to OFF in system setup (see "System Setup").

    If you are booting to a USB device, connect the USB device to a USB connector.

    Turn on (or restart) your computer.

    When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your computer and try again.

The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it.

    At the bottom of the menu, enter the number of the device that is to be used for the current boot only.

For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.
    NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.

source : http://support.feelpcs.com/pc-spec/Dime … ssetup.htm

Dans le pire des cas avec l'outil de pendrivelinux.com sous Windows faire une clé USB du Linux souhaité:
http://www.pendrivelinux.com/universal- … -as-1-2-3/


tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User     #363458
Machine Registered     #261921

Hors ligne