#1 Le 24/08/2015, à 21:57
- Harold88
Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Après mise à jour (14.04 sur 12.04), gros problèmes : kernel panic. J'ai réinstallé le 12.04 LTS. Ubuntu démarre mais je n'ai pas accès à mes données. Une notification dans la barre de menu en haut : " Erreur: ouverture du cache: E: Read error-read (5: input/output error), E: The package list or status file could not be parsed or opened.) Certains de vos paquets installés ont des dépendances non satisfaites."
La commande ls /boot donne :
abi-3.13.0-32-generic memtest86+.bin
abi-3.2.0-89-generic-pae memtest86+_multiboot.bin
config-3.13.0-32-generic System.map-3.13.0-32-generic
config-3.2.0-89-generic-pae System.map-3.2.0-89-generic-pae
grub vmlinuz-3.13.0-32-generic
initrd.img-3.13.0-32-generic vmlinuz-3.2.0-89-generic-pae
initrd.img-3.2.0-89-generic-pae
Que faire ? Merci pour votre aide !
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 24/08/2015, à 21:59)
Hors ligne
#2 Le 25/08/2015, à 06:35
- malbo
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
J'ai réinstallé le 12.04 LTS.
As-tu fait cette réinstallation en utilisant cette doc : Comment réinstaller Ubuntu ?
Si tu ne l'as pas utilisée, j'ai des craintes...
Depuis une session de ton Ubuntu réinstallé, peux-tu faire un Boot-Info et donner l'URL de ce Boot-Info dans ta réponse ?
Hors ligne
#3 Le 25/08/2015, à 07:35
- Harold88
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Merci pour ta réponse. Voilà ce qu'il se passe lors de la manip : le message suivant s'affiche à l'étape "recharger la liste des paquets"
3 123 ko réceptionnés en 4s (632 ko/s)
Lecture des listes de paquets... Erreur !
E: Erreur de lecture - read (5: Erreur d'entrée/sortie)
E: Les listes de paquets ou le fichier « status » ne peuvent être analysés ou lus.
Hors ligne
#4 Le 25/08/2015, à 08:04
- malbo
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Effectivement, ça semble un peu bloqué depuis une session du Ubuntu installé. A la place, je te propose de faire le Boot-Info depuis une session live de Ubuntu 12.04 c'est à dire démarrage de l'ordi sur un support Live de Ubuntu 12.04 (LiveCD ou LiveUSB), choix "Essayer Ubuntu" et suivre cette autre doc pour faire le Boot-Info : http://doc.ubuntu-fr.org/tutoriel/boot-info
Dernière modification par malbo (Le 25/08/2015, à 08:05)
Hors ligne
#5 Le 25/08/2015, à 08:26
- Harold88
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Merci. L'URL renvoyée : http://paste.ubuntu.com/12190612
Hors ligne
#6 Le 25/08/2015, à 08:45
- malbo
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1
and looks at sector 524787640 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 960,212,991 960,210,944 83 Linux
/dev/sda2 960,215,038 976,771,071 16,556,034 5 Extended
/dev/sda5 960,215,040 976,771,071 16,556,032 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 a7318d07-21a8-4c73-bbf8-ccfe031d6d9a ext4
/dev/sda5 db3a750c-c656-4c4a-96a5-811a08b9339f swap
/dev/sr0 iso9660 Ubuntu 12.04.5 LTS i386
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 25 06:21 ata-HGST_HCC545050A7E380_TEJ51239DH8PRX -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 25 06:15 ata-HGST_HCC545050A7E380_TEJ51239DH8PRX-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 25 06:15 ata-HGST_HCC545050A7E380_TEJ51239DH8PRX-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 25 06:15 ata-HGST_HCC545050A7E380_TEJ51239DH8PRX-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Aug 25 06:15 ata-Slimtype_DVD_A_DS8A4S_004020734388 -> ../../sr0
lrwxrwxrwx 1 root root 9 Aug 25 06:21 scsi-SATA_HGST_HCC545050A_TEJ51239DH8PRX -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 25 06:15 scsi-SATA_HGST_HCC545050A_TEJ51239DH8PRX-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 25 06:15 scsi-SATA_HGST_HCC545050A_TEJ51239DH8PRX-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 25 06:15 scsi-SATA_HGST_HCC545050A_TEJ51239DH8PRX-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Aug 25 06:21 wwn-0x5000cca720d509bb -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 25 06:15 wwn-0x5000cca720d509bb-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 25 06:15 wwn-0x5000cca720d509bb-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 25 06:15 wwn-0x5000cca720d509bb-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=a7318d07-21a8-4c73-bbf8-ccfe031d6d9a ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
echo 'Chargement de Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=a7318d07-21a8-4c73-bbf8-ccfe031d6d9a ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.2.0-89-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
linux /boot/vmlinuz-3.2.0-89-generic-pae root=UUID=a7318d07-21a8-4c73-bbf8-ccfe031d6d9a ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-89-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-89-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
echo 'Chargement de Linux 3.2.0-89-generic-pae ...'
linux /boot/vmlinuz-3.2.0-89-generic-pae root=UUID=a7318d07-21a8-4c73-bbf8-ccfe031d6d9a ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.2.0-89-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=a7318d07-21a8-4c73-bbf8-ccfe031d6d9a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=db3a750c-c656-4c4a-96a5-811a08b9339f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
346.131965637 = 371.656368128 boot/grub/grub.cfg 1
250.238273621 = 268.691300352 boot/grub/core.img 1
0.883449554 = 0.948596736 boot/vmlinuz-3.13.0-32-generic 2
250.740051270 = 269.230080000 boot/vmlinuz-3.2.0-89-generic-pae 1
0.883449554 = 0.948596736 vmlinuz 2
251.377605438 = 269.914648576 boot/initrd.img-3.13.0-32-generic 2
250.792900085 = 269.286825984 boot/initrd.img-3.2.0-89-generic-pae 1
251.377605438 = 269.914648576 initrd.img 2
251.377605438 = 269.914648576 initrd.img.old 2
=============================== StdErr Messages: ===============================
umount: /mnt/BootInfo/sda1: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-08-25__06h21 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 12.04.5 LTS, precise, Ubuntu, i686)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu 12.04.5 LTS (12.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="a7318d07-21a8-4c73-bbf8-ccfe031d6d9a" TYPE="ext4"
/dev/sda5: UUID="db3a750c-c656-4c4a-96a5-811a08b9339f" TYPE="swap"
/dev/sr0: LABEL="Ubuntu 12.04.5 LTS i386" TYPE="iso9660"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 7 2014 grub.d
total 60
-rwxr-xr-x 1 root root 7806 juil. 25 2014 00_header
-rwxr-xr-x 1 root root 5522 juil. 25 2014 05_debian_theme
-rwxr-xr-x 1 root root 7877 juil. 25 2014 10_linux
-rwxr-xr-x 1 root root 6449 juil. 25 2014 20_linux_xen
-rwxr-xr-x 1 root root 1588 nov. 27 2011 20_memtest86+
-rwxr-xr-x 1 root root 6675 juil. 25 2014 30_os-prober
-rwxr-xr-x 1 root root 1388 juil. 25 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 25 2014 40_custom
-rwxr-xr-x 1 root root 95 juil. 25 2014 41_custom
-rw-r--r-- 1 root root 483 juil. 25 2014 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA HGST HCC545050A7 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 492GB 492GB primary ext4 boot
2 492GB 500GB 8477MB extended
5 492GB 500GB 8477MB logical linux-swap(v1)
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA HGST HCC545050A7;
1:1049kB:492GB:492GB:ext4::boot;
2:492GB:500GB:8477MB:::;
5:492GB:500GB:8477MB:linux-swap(v1)::;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 465,8G HGST HCC
sda1 part ext4 457,9G a7318d07-21a8-4c73-bbf8-ccfe031d6d9a
sda2 part 1K
sda5 part swap 7,9G db3a750c-c656-4c4a-96a5-811a08b9339f
sr0 rom iso9660 755,1M Ubuntu 12.04.5 LTS i386
DVD A D
loop0 loop squashfs 721,6M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda5 1 0 0 [SWAP]
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 4.0G 101M 3.9G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 799M 860K 799M 1% /run
/dev/sr0 iso9660 756M 756M 0 100% /cdrom
/dev/loop0 squashfs 722M 722M 0 100% /rofs
tmpfs tmpfs 4.0G 32K 4.0G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 4.0G 76K 4.0G 1% /run/shm
/dev/sda1 ext4 451G 3.8G 424G 1% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0003889c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 960212991 480105472 83 Linux
/dev/sda2 960215038 976771071 8278017 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 960215040 976771071 8278016 82 Linux swap / Solaris
Partition outside the disk détecté.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
pastebinit packages needed
E: Le paquet « pastebinit » n'a pas de version susceptible d'être installée
dpkg-preconfigure: impossible de réouvrir stdin : No such file or directory
On y voit ceci :
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 4.0G 101M 3.9G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 799M 860K 799M 1% /run
/dev/sr0 iso9660 756M 756M 0 100% /cdrom
/dev/loop0 squashfs 722M 722M 0 100% /rofs
tmpfs tmpfs 4.0G 32K 4.0G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 4.0G 76K 4.0G 1% /run/shm
/dev/sda1 ext4 451G 3.8G 424G 1% /mnt/boot-sav/sda1
La dernière ligne indique que tu as seulement 3.8 Go occupés sur ta partition racine. Pour moi, toutes tes données ont disparu. J'ai vu que tu as créé une autre discussion ici : http://forum.ubuntu-fr.org/viewtopic.php?id=1891461
Il est possible que des données soient récupérables et si certaines sont très précieuses pour toi, il faut t'adresser à un spécialiste de la récupération de données : une bonne adresse ici.
Sinon, ça te servira de leçon et la prochaine fois, tu feras tes sauvegardes de données avant de te lancer dans une mise à niveau.
Dernière modification par malbo (Le 25/08/2015, à 08:48)
Hors ligne
#7 Le 25/08/2015, à 09:22
- Harold88
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Est-il possible de visualiser à quoi correspondent ces 3,8 Go ?
Hors ligne
#8 Le 25/08/2015, à 09:46
- malbo
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Est-il possible de visualiser à quoi correspondent ces 3,8 Go ?
Oui. Je pense que la doc suivante te permet d'explorer la partition en question : https://doc.ubuntu-fr.org/tutoriel/recu … _un_livecd
Mais comme tu sais déjà qu'il n'y a pas tes données dedans (ton post du 20/08/2015, à 11:13 dans l'autre discussion), je pense que tu ne vas rien trouver de plus.
Hors ligne
#9 Le 25/08/2015, à 11:08
- Harold88
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
J'essaie désespèrement. J'ai téléchargé testdisk. Le dossier Testdisk-7.0 se trouve dans mon Home. Lorsque je veux le lancer avec sudo apt-get install testdisk, il me revient cete réponse:
ubuntu@ubuntu:~$ sudo apt-get install testdisk
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet testdisk
Que se passe-t-il ??
Dernière modification par Harold88 (Le 25/08/2015, à 11:08)
Hors ligne
#10 Le 25/08/2015, à 11:45
- Ayral
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Modération : créer deux discussions sur des sujets semblables ne mène qu'à la confusion. Je me propose de fermer l'autre discussion et de la rediriger ici.
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne
#11 Le 25/08/2015, à 12:01
- Harold88
Re : Après mise à jour (14.04 sur 12.04) plus d'accès à mes données
Ok. Merci. L'autre se mourrait ...
Hors ligne